I am still on 5.2 and have this problem with some of my parts. It is a
screen refresh issue, after you approve the revision in the engineering
workbench you must click on another line (either a material or operation) to
force a screen refresh. After that, the "check in" menu item will be active.
I reported this to my Epicor contact here in Australia almost 12 months ago
but heard nothing back.
Regards,
John Walter
Systems Administrator
Hufcor Pty Ltd
-----Original Message-----
From: Paula Bruckner [mailto:pbruckner@...]
Sent: Wednesday, 6 August 2003 2:23 AM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] 5.2 to 6.0
Diane,
We have upgraded this weekend from ver. 5.2 to 6.00.510.
Currently, Vantage has the following problem in the engineering work
bench:
ECO groups set-up in 5.2 do not work correctly in 6.0. Vantage is at this
moment reviewing how to fix my problem. What happens, is that you can enter
or revise a part's operations & material, approve them, but you CANNOT
"CHECK IN" the part. Therefore, it cannot be released for production. The
way to get around it is to enter a NEW group in 6.0, but then you get
duplicate groups.
The good thing that I've seen in 6.0 is that the Task Set is now available
in the engineering module. I'm currently trying to determine how best to
set it up for our purposes.
Paula Bruckner
screen refresh issue, after you approve the revision in the engineering
workbench you must click on another line (either a material or operation) to
force a screen refresh. After that, the "check in" menu item will be active.
I reported this to my Epicor contact here in Australia almost 12 months ago
but heard nothing back.
Regards,
John Walter
Systems Administrator
Hufcor Pty Ltd
-----Original Message-----
From: Paula Bruckner [mailto:pbruckner@...]
Sent: Wednesday, 6 August 2003 2:23 AM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] 5.2 to 6.0
Diane,
We have upgraded this weekend from ver. 5.2 to 6.00.510.
Currently, Vantage has the following problem in the engineering work
bench:
ECO groups set-up in 5.2 do not work correctly in 6.0. Vantage is at this
moment reviewing how to fix my problem. What happens, is that you can enter
or revise a part's operations & material, approve them, but you CANNOT
"CHECK IN" the part. Therefore, it cannot be released for production. The
way to get around it is to enter a NEW group in 6.0, but then you get
duplicate groups.
The good thing that I've seen in 6.0 is that the Task Set is now available
in the engineering module. I'm currently trying to determine how best to
set it up for our purposes.
Paula Bruckner
----- Original Message -----
From: Diane Rowberry
To: vantage@yahoogroups.com
Sent: Monday, August 04, 2003 5:30 PM
Subject: [Vantage] 5.2 to 6.0
Hello groupies!
We are contemplating moving from 5.2 to 6.0 soon and would like to ask a
question or two of those already using 6.0. Would you say it is stable
at
this time?? What new features are there to say oooo and ahhhh about?
Any
problems or disappointments?? Your advise would be greatly
appreciated!!
Thank you in advance...have a great week!
Diane Rowberry
Westwood Precision, Inc.
(425) 742-7011 ex 43
(425) 353-8945 Fax
diane.rowberry@...
www.westwoodprecision.com
Yahoo! Groups Sponsor
ADVERTISEMENT
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Yahoo! Groups Sponsor
ADVERTISEMENT
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]