[6.1]Compile CReports on Terminal Server

It does seem to be a permissions issue. I can log onto the TS as
administrator and the compiled reports run fine. If I log on to the TS as a
user (with administrator rights) the report starts, but stops after entering
the ODBC password.

I've tried changing all sorts of permissions but haven't found the right one
yet.

Norm Watkins
Engineering Mgr.
ELECPAC
847-639-2307

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of Todd Caughey
Sent: Thursday, March 13, 2008 1:10 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage][6.1]Compile CReports on Terminal Server


Sorry. I did not think of running them via ODBC. All our
compiled/distributed reports are non-ODBC so use the DBF files created via
print previewing other reports.

For ODBC from TS (which I hav enever done) I also recall some login
credential issues for the DSN.

-Todd C.
________________________________
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Norm Watkins
Sent: Thursday, March 13, 2008 3:01 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage][6.1]Compile CReports on Terminal Server


Running a compiled report doesn't create any DBF files. I emptied my working
directory, and ran a compiled report successfully on my workstation, and no
files were created in the working directory.

any other ideas?

thanks,

Norm Watkins
Engineering Mgr.
ELECPAC
847-639-2307

-----Original Message-----
From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>]On Behalf
Of Todd Caughey
Sent: Thursday, March 13, 2008 11:43 AM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage][6.1]Compile CReports on Terminal Server

Where do the DBF files that vantage creates go for TS users? I vaguely
recall something about users' mfgwrk61 folders needing to be individual and
on the server PC. This may have something to do with it. Just a guess.
-Todd C.

________________________________
From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf
Of
Norm Watkins
Sent: Thursday, March 13, 2008 1:14 PM
To: Vantage@Yahoogroups. Com
Subject: [Vantage][6.1]Compile CReports on Terminal Server

I've been compiling and distributing CR's to work stations without a
problem, but cannot get them to run on W2003Server through Terminal Server.
The "setup" ran fine. The report starts by opening the first window, but
after selecting "Print" nothing more happens. Is there anything different
about running the reports on TS?

thanks,

Norm Watkins
Engineering Mgr.
ELECPAC
847-639-2307

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links





[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
I've been compiling and distributing CR's to work stations without a
problem, but cannot get them to run on W2003Server through Terminal Server.
The "setup" ran fine. The report starts by opening the first window, but
after selecting "Print" nothing more happens. Is there anything different
about running the reports on TS?

thanks,

Norm Watkins
Engineering Mgr.
ELECPAC
847-639-2307
Where do the DBF files that vantage creates go for TS users? I vaguely recall something about users' mfgwrk61 folders needing to be individual and on the server PC. This may have something to do with it. Just a guess.
-Todd C.

________________________________
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Norm Watkins
Sent: Thursday, March 13, 2008 1:14 PM
To: Vantage@Yahoogroups. Com
Subject: [Vantage][6.1]Compile CReports on Terminal Server


I've been compiling and distributing CR's to work stations without a
problem, but cannot get them to run on W2003Server through Terminal Server.
The "setup" ran fine. The report starts by opening the first window, but
after selecting "Print" nothing more happens. Is there anything different
about running the reports on TS?

thanks,

Norm Watkins
Engineering Mgr.
ELECPAC
847-639-2307





[Non-text portions of this message have been removed]
Running a compiled report doesn't create any DBF files. I emptied my working
directory, and ran a compiled report successfully on my workstation, and no
files were created in the working directory.

any other ideas?

thanks,

Norm Watkins
Engineering Mgr.
ELECPAC
847-639-2307

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of Todd Caughey
Sent: Thursday, March 13, 2008 11:43 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage][6.1]Compile CReports on Terminal Server


Where do the DBF files that vantage creates go for TS users? I vaguely
recall something about users' mfgwrk61 folders needing to be individual and
on the server PC. This may have something to do with it. Just a guess.
-Todd C.

________________________________
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Norm Watkins
Sent: Thursday, March 13, 2008 1:14 PM
To: Vantage@Yahoogroups. Com
Subject: [Vantage][6.1]Compile CReports on Terminal Server


I've been compiling and distributing CR's to work stations without a
problem, but cannot get them to run on W2003Server through Terminal Server.
The "setup" ran fine. The report starts by opening the first window, but
after selecting "Print" nothing more happens. Is there anything different
about running the reports on TS?

thanks,

Norm Watkins
Engineering Mgr.
ELECPAC
847-639-2307





[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
Sorry. I did not think of running them via ODBC. All our compiled/distributed reports are non-ODBC so use the DBF files created via print previewing other reports.

For ODBC from TS (which I hav enever done) I also recall some login credential issues for the DSN.

-Todd C.
________________________________
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Norm Watkins
Sent: Thursday, March 13, 2008 3:01 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage][6.1]Compile CReports on Terminal Server


Running a compiled report doesn't create any DBF files. I emptied my working
directory, and ran a compiled report successfully on my workstation, and no
files were created in the working directory.

any other ideas?

thanks,

Norm Watkins
Engineering Mgr.
ELECPAC
847-639-2307

-----Original Message-----
From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>]On Behalf
Of Todd Caughey
Sent: Thursday, March 13, 2008 11:43 AM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage][6.1]Compile CReports on Terminal Server

Where do the DBF files that vantage creates go for TS users? I vaguely
recall something about users' mfgwrk61 folders needing to be individual and
on the server PC. This may have something to do with it. Just a guess.
-Todd C.

________________________________
From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf Of
Norm Watkins
Sent: Thursday, March 13, 2008 1:14 PM
To: Vantage@Yahoogroups. Com
Subject: [Vantage][6.1]Compile CReports on Terminal Server

I've been compiling and distributing CR's to work stations without a
problem, but cannot get them to run on W2003Server through Terminal Server.
The "setup" ran fine. The report starts by opening the first window, but
after selecting "Print" nothing more happens. Is there anything different
about running the reports on TS?

thanks,

Norm Watkins
Engineering Mgr.
ELECPAC
847-639-2307

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links





[Non-text portions of this message have been removed]