8.00 Blank Title 60188

Bruce,
Thank you for the information, anytime I can hear how other people doing things is a great help.



Darren Giordnao
Information Systems
PACE Worldwide

----- Original Message ----
From: Bruce Butler <bbutler@...>
To: vantage@yahoogroups.com
Sent: Saturday, October 27, 2007 3:20:02 PM
Subject: RE: [Vantage] 8.00

I don't necessarily think this answers your question, but..

As procedure, we zero out the value of the obsolete material, and classify
as DEAD RAW, DEAD HARDWARE, DEAD FINISHED, DEAD SUBASSY, ETC..

Maybe helpful,

Bruce

From: vantage@yahoogroups .com [mailto:vantage@yahoogroups .com] On Behalf Of
Darren Giordano
Sent: Friday, October 26, 2007 9:45 AM
To: Vantage
Subject: [Vantage] 8.00

We are in the process of finishing our physical inventory and have located a
bunch of obsolete parts in our production warehouses. These are parts we
need to keep on the shelf for repair work but do not manufacture anymore.
I was wondering what the procedure to remove the warehouse location from the
part. I am thinking it should be a matter of moving the inventory to our
obsolete storage warehouse and then deleting the warehouse location in the
part setup. But that seems too easy..

Thank you,
Darren Giordano
PACE, Worldwide

____________ _________ _________ _________ _________ __
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail. yahoo.com

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]




__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

[Non-text portions of this message have been removed]
We are in the process of finishing our physical inventory and have located a bunch of obsolete parts in our production warehouses. These are parts we need to keep on the shelf for repair work but do not manufacture anymore.
I was wondering what the procedure to remove the warehouse location from the part. I am thinking it should be a matter of moving the inventory to our obsolete storage warehouse and then deleting the warehouse location in the part setup. But that seems too easy..


Thank you,
Darren Giordano
PACE, Worldwide

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

[Non-text portions of this message have been removed]
I believe inventory transfer was in 8.00 as well that might be only one
step for you.



From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Darren Giordano
Sent: Friday, October 26, 2007 9:45 AM
To: Vantage
Subject: [Vantage] 8.00



We are in the process of finishing our physical inventory and have
located a bunch of obsolete parts in our production warehouses. These
are parts we need to keep on the shelf for repair work but do not
manufacture anymore.
I was wondering what the procedure to remove the warehouse location from
the part. I am thinking it should be a matter of moving the inventory to
our obsolete storage warehouse and then deleting the warehouse location
in the part setup. But that seems too easy..

Thank you,
Darren Giordano
PACE, Worldwide

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
Paul,
Thanks for the help.

Thank you,
Darren Giordano
PACE, Worldwide


----- Original Message ----
From: Paul V. Blais <pblais@...>
To: vantage@yahoogroups.com
Sent: Friday, October 26, 2007 10:12:40 AM
Subject: RE: [Vantage] 8.00

I believe inventory transfer was in 8.00 as well that might be only one
step for you.

From: vantage@yahoogroups .com [mailto:vantage@yahoogroups .com] On Behalf
Of Darren Giordano
Sent: Friday, October 26, 2007 9:45 AM
To: Vantage
Subject: [Vantage] 8.00

We are in the process of finishing our physical inventory and have
located a bunch of obsolete parts in our production warehouses. These
are parts we need to keep on the shelf for repair work but do not
manufacture anymore.
I was wondering what the procedure to remove the warehouse location from
the part. I am thinking it should be a matter of moving the inventory to
our obsolete storage warehouse and then deleting the warehouse location
in the part setup. But that seems too easy..

Thank you,
Darren Giordano
PACE, Worldwide

____________ _________ _________ _________ _________ __
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail. yahoo.com

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]




__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

[Non-text portions of this message have been removed]
As parts are deemed obsolete, we quantity adjust out of the active warehouse
to an "obsolete" warehouse in a NON NETTABLE bin. This allows an issue (at
no cost) to a repair job if needed. The only down side is those parts will
not show on the stock status report you may want another method to track
them. (i.e report builder or a Crystal report). You can also return them
to active if needed by reversing the process, but the accountants get
nervous when we do that. . . LOL

Stan



_____

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Darren Giordano
Sent: Friday, October 26, 2007 1:00 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] 8.00

Paul,
Thanks for the help.

Thank you,
Darren Giordano
PACE, Worldwide

----- Original Message ----
From: Paul V. Blais <pblais@lavignemfg. <mailto:pblais%40lavignemfg.com>
com>
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Sent: Friday, October 26, 2007 10:12:40 AM
Subject: RE: [Vantage] 8.00

I believe inventory transfer was in 8.00 as well that might be only one
step for you.

From: vantage@yahoogroups .com [mailto:vantage@yahoogroups .com] On Behalf
Of Darren Giordano
Sent: Friday, October 26, 2007 9:45 AM
To: Vantage
Subject: [Vantage] 8.00

We are in the process of finishing our physical inventory and have
located a bunch of obsolete parts in our production warehouses. These
are parts we need to keep on the shelf for repair work but do not
manufacture anymore.
I was wondering what the procedure to remove the warehouse location from
the part. I am thinking it should be a matter of moving the inventory to
our obsolete storage warehouse and then deleting the warehouse location
in the part setup. But that seems too easy..

Thank you,
Darren Giordano
PACE, Worldwide

____________ _________ _________ _________ _________ __
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail. yahoo.com

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail. <http://mail.yahoo.com> yahoo.com

[Non-text portions of this message have been removed]



[Non-text portions of this message have been removed]
I don't necessarily think this answers your question, but..



As procedure, we zero out the value of the obsolete material, and classify
as DEAD RAW, DEAD HARDWARE, DEAD FINISHED, DEAD SUBASSY, ETC..



Maybe helpful,



Bruce



From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Darren Giordano
Sent: Friday, October 26, 2007 9:45 AM
To: Vantage
Subject: [Vantage] 8.00



We are in the process of finishing our physical inventory and have located a
bunch of obsolete parts in our production warehouses. These are parts we
need to keep on the shelf for repair work but do not manufacture anymore.
I was wondering what the procedure to remove the warehouse location from the
part. I am thinking it should be a matter of moving the inventory to our
obsolete storage warehouse and then deleting the warehouse location in the
part setup. But that seems too easy..

Thank you,
Darren Giordano
PACE, Worldwide

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]