[BULK] RE: OT: Terminal Services

Tricia,



I believe it is limited to w2k3. However, you can check by going to the
server...logging in as administrator or equiv. then in the
Administrative Tools, Active Directory Users & Computers. Select your
user ID and then go to Environment tab. Bottom part of the screen says
"Client Devices". If you do not have the "Connect client drives at
login" then 2000 Server will not support it natively.



As mentioned in the group here there is a Microsoft document that
explains how to do drive mapping/sharing with Windows 2000 Terminal
Server, however, this is if you are using Windows NT/2000 clients - the
article does not mention anything regarding the XP client.



Thanks,



Jason Claggett

Microsoft Small Business Specialist

MCP #3856159

2W Technologies, LLC

317.578.2393

jason@...

________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Tricia Simon
Sent: Thursday, April 26, 2007 2:58 PM
To: vantage@yahoogroups.com
Subject: RE: [BULK] RE: [Vantage] OT: Terminal Services



Jason,

Is this limited to Windows 2003 also? If not, could you please tell me
where to find this because I'm not having much luck! :-(

Thanks again everyone! :-)

Tricia Simon, Controller

Riten Industries, Inc.

800-338-0027

_____

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf Of
Jason Claggett
Sent: Thursday, April 26, 2007 12:45 PM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: RE: [BULK] RE: [Vantage] OT: Terminal Services

Hey Cliff,

Not sure if you mean Client Settings or Sessions as there is not a
Client Sessions tab in the TS Configuration :-). Also, by checking the
box you actually DISABLE the copy and paste feature (the section heading
says "Disable the following") - I misread it the first time I looked at
it, too.

Thanks,

Jason Claggett

Microsoft Small Business Specialist

MCP #3856159

2W Technologies, LLC

317.578.2393

jason@2wtech. <mailto:jason%402wtech.com> com

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
Of Cliff Drumeller
Sent: Thursday, April 26, 2007 10:09 AM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: RE: [BULK] RE: [Vantage] OT: Terminal Services

Guys
Go into the Terminal services configuration on the TS server. Client
Sessions tab -- put a check in clipboard mapping and now you can cut and
paste.

Cliff

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com> ] On
Behalf
Of Bruce Butler
Sent: Thursday, April 26, 2007 6:39 AM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
Subject: [BULK] RE: [Vantage] OT: Terminal Services
Importance: Low

I use a pdf printer which is installed on the client computer, and
mapped from the citrix client. The citrix client treats it like any
other mapped client printer. The client computer initiates the pdf
program (PrimoPdf).

Bruce Butler

IT Manager

Knappe & Koester, Inc.

_____

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> ] On
Behalf
Of Todd Caughey
Sent: Thursday, April 26, 2007 9:01 AM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] OT: Terminal Services

I'm in same boat. Been toying with idea of exporting/printing to a
folder accessable via FTP and letting remote user drag/drop from browser
to remote PC. But this is about #14 on my hot list at the moment. If
anyone else has done this please share experience. Another thought I've
had (and easier to try) for our Citrix setup (and maybe TS if local
printer is seen) would be to setup a local printer as a "to file"
printer. Probably not good for spreadsheets, etc... but maybe OK for
print formatted items.
-Todd C.

-----Original Message-----
From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> ]On
Behalf Of Mitchell Kirby
Sent: Thursday, April 26, 2007 7:51 AM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
Subject: [Vantage] OT: Terminal Services

We use RDP and TS to run some Report Builder reports. We export some of
the
reports to a file on the server. How do you cut the file from the server
to
the remote PC? Cut and Paste doesn't seem to work. I could email the
file
but I don't want to set up email on the server for security reasons.

Sincerely,

Mitchell Kirby

Riten Industries, Inc.

< http://www.riten <http://www.riten <http://www.riten.com/
<http://www.riten.com/> > com/
<http://www.riten <http://www.riten.com/ <http://www.riten.com/> >
com/>
<http://www.riten <http://www.riten.com/ <http://www.riten.com/> > com/
<http://www.riten
<http://www.riten.com/ <http://www.riten.com/> > com/> >
<http://www.riten <http://www.riten.com/ <http://www.riten.com/> > com/
<http://www.riten
<http://www.riten.com/ <http://www.riten.com/> > com/>
<http://www.riten <http://www.riten.com/ <http://www.riten.com/> >
com/
<http://www.riten <http://www.riten.com/ <http://www.riten.com/> >
com/> > > >
com/> www.riten.com

740-333-8719 Direct

800-338-0027 Sales

800-338-0717 FAX

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
We are looking into updating to terminal services and I was
wondering how many concurrent vantage users can access vantage
through terminal services. What size server do you use? Are you
limited in the amount of users through terminal services? We are
currently on V5.0 and will be updating to 6.0 or 6.1 this spring.
Any response would be really appreaciated. Thanks.
We have 41 users on our T.S. running Windows 2003. 25 of them are Data collections and the other 10 are normal desktop users. We have 6 people who connect to it from home. We have a HP 6000 Netserver. 6 Xeon 1.2G Processors with 2MB L2 Cache and 8GB of Ram with a 1GB nic. I rarely see the server go over 15% processor usage. Memory runs around 2GB usage. We are on Vantage 6.0. I got the box very cheep on Ebay otherwise it would really be overkill for us. I ran 23 DataCollection terminals on a Dual AMD 1.7G PC with 2GB ram with no problem before I upgraded to the HP 6000. Terminal server makes the Vantage upgrades allot easier.

Jeremy Leonard
IT Manager
K-T Corporation


-----Original Message-----
From: janes925 [mailto:nschultz@...]
Sent: Monday, January 19, 2004 8:16 AM
To: vantage@yahoogroups.com
Subject: [Vantage] OT: Terminal Services


We are looking into updating to terminal services and I was
wondering how many concurrent vantage users can access vantage
through terminal services. What size server do you use? Are you
limited in the amount of users through terminal services? We are
currently on V5.0 and will be updating to 6.0 or 6.1 this spring.
Any response would be really appreaciated. Thanks.




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Yahoo! Groups Links

To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
We are currently running a Dell 2650 with dual 2.4 Xeon processors with
2GB ram. We have mirrored 2 - 36 GB scsi drives. We also have two
gigabit nic�s load duplexed and load balanced on a 100mb switched
network to allow for up to 200mb duplexed traffic. I find that Vantage
runs much better through a terminal services connection with all of my
users connected than on a workstation. I am licensed for 25 terminal
server license. I rarely see the processor go above 10% utilization. I
purposely configured this machine with more resources than necessary to
allow for unplanned circumstances. Microsoft�s requirements are rather
meager, but I would at least double their recommendations to ensure that
your users do not experience delay�s.



FYI, I am using a similar machine for Vantage as well. Between these two
servers, I do not see any lags in the product, whether on a workstation
or thin client.



Thanks.



dave



David P. Utley

IS Manager

National Coupling Company, Inc.

1316 Staffordshire Road

Stafford, Texas 77477

Office: 281.499.2583

Fax: 281.499.5941

Direct: 281.208.6715

Cell: 281.352.2793



-----Original Message-----
From: janes925 [mailto:nschultz@...]
Sent: Monday, January 19, 2004 7:16 AM
To: vantage@yahoogroups.com
Subject: [Vantage] OT: Terminal Services



We are looking into updating to terminal services and I was
wondering how many concurrent vantage users can access vantage
through terminal services. What size server do you use? Are you
limited in the amount of users through terminal services? We are
currently on V5.0 and will be updating to 6.0 or 6.1 this spring.
Any response would be really appreaciated. Thanks.





Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto: HYPERLINK
"http://groups.yahoo.com/group/vantage/files/"http://groups.yahoo.com/gr
oup/vantage/files/.
(2) To search through old msg's goto: HYPERLINK
"http://groups.yahoo.com/group/vantage/messages"http://groups.yahoo.com/
group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
HYPERLINK
"http://groups.yahoo.com/group/vantage/links"http://groups.yahoo.com/gro
up/vantage/links



_____

Yahoo! Groups Links

* To visit your group on the web, go to:
HYPERLINK
"http://groups.yahoo.com/group/vantage/"http://groups.yahoo.com/group/va
ntage/


* To unsubscribe from this group, send an email to:
HYPERLINK
"mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe"vantage-
unsubscribe@yahoogroups.com


* Your use of Yahoo! Groups is subject to the HYPERLINK
"http://docs.yahoo.com/info/terms/"Yahoo! Terms of Service.


--
Incoming mail is certified Virus Free.
Checked by AVG Anti-Virus (http://www.grisoft.com).
Version: 7.0.211 / Virus Database: 261.7.2 - Release Date: 1/19/2004



--
Outgoing mail is certified Virus Free.
Checked by AVG Anti-Virus (http://www.grisoft.com).
Version: 7.0.211 / Virus Database: 261.7.2 - Release Date: 1/19/2004



[Non-text portions of this message have been removed]
Do your users print locally using the Windws 2003 TS client?

"Leonard, Jeremy" <jleonard@...> wrote:We have 41 users on our T.S. running Windows 2003. 25 of them are Data collections and the other 10 are normal desktop users. We have 6 people who connect to it from home. We have a HP 6000 Netserver. 6 Xeon 1.2G Processors with 2MB L2 Cache and 8GB of Ram with a 1GB nic. I rarely see the server go over 15% processor usage. Memory runs around 2GB usage. We are on Vantage 6.0. I got the box very cheep on Ebay otherwise it would really be overkill for us. I ran 23 DataCollection terminals on a Dual AMD 1.7G PC with 2GB ram with no problem before I upgraded to the HP 6000. Terminal server makes the Vantage upgrades allot easier.

Jeremy Leonard
IT Manager
K-T Corporation


-----Original Message-----
From: janes925 [mailto:nschultz@...]
Sent: Monday, January 19, 2004 8:16 AM
To: vantage@yahoogroups.com
Subject: [Vantage] OT: Terminal Services


We are looking into updating to terminal services and I was
wondering how many concurrent vantage users can access vantage
through terminal services. What size server do you use? Are you
limited in the amount of users through terminal services? We are
currently on V5.0 and will be updating to 6.0 or 6.1 this spring.
Any response would be really appreaciated. Thanks.




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Yahoo! Groups Links

To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links



---------------------------------
Yahoo! Groups Links

To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.




---------------------------------
Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes

[Non-text portions of this message have been removed]
We run two Windows 2000 terminal servers, they are home-built machines with
dual AMD Athlon MP 2400+ processors, 1Gb RAM and dual 100Mbit NICs. User
profiles are stores on a NAS appliance on the network so are available
whether the user logs into one of the terminal servers or any other Windows
2000 machine.

The Vantage clients don't put a massive load on the terminal servers but our
users have a lot of Access databases which do sap quite a bit of power.

Paul.

> -----Original Message-----
> From: janes925 [mailto:nschultz@...]
> Sent: Monday, January 19, 2004 8:16 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] OT: Terminal Services
>
>
> We are looking into updating to terminal services and I was
> wondering how many concurrent vantage users can access vantage
> through terminal services. What size server do you use? Are you
> limited in the amount of users through terminal services? We are
> currently on V5.0 and will be updating to 6.0 or 6.1 this spring.
> Any response would be really appreaciated. Thanks.

This e-Mail (and any attachments) should only be read by the intended
addressee(s) and not be relied upon without subsequent written confirmation
of its contents. Concentric Controls Ltd. accepts no liability for the
consequences of any person acting on such information prior to the receipt
of such confirmation. If you are not the intended recipient, you are not
authorised to, and must not use, disclose, copy, distribute, or retain this
message, its attachments or any part thereof. Any views or opinions
expressed are those of the author and do not necessarily reflect the
opinions of Concentric Controls Ltd.

Concentric Controls Ltd. www.concentriccontrols.com
Priory Road, Aston, Birmingham B6 7LH, UK
Tel: +44 (0)121 327 1662 Fax: +44 (0)121 328 2498
Are they internal TS sessions or are they accessing the servers through a T-1 line.

Paul Oliver <p.oliver@...> wrote:We run two Windows 2000 terminal servers, they are home-built machines with
dual AMD Athlon MP 2400+ processors, 1Gb RAM and dual 100Mbit NICs. User
profiles are stores on a NAS appliance on the network so are available
whether the user logs into one of the terminal servers or any other Windows
2000 machine.

The Vantage clients don't put a massive load on the terminal servers but our
users have a lot of Access databases which do sap quite a bit of power.

Paul.

> -----Original Message-----
> From: janes925 [mailto:nschultz@...]
> Sent: Monday, January 19, 2004 8:16 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] OT: Terminal Services
>
>
> We are looking into updating to terminal services and I was
> wondering how many concurrent vantage users can access vantage
> through terminal services. What size server do you use? Are you
> limited in the amount of users through terminal services? We are
> currently on V5.0 and will be updating to 6.0 or 6.1 this spring.
> Any response would be really appreaciated. Thanks.

This e-Mail (and any attachments) should only be read by the intended
addressee(s) and not be relied upon without subsequent written confirmation
of its contents. Concentric Controls Ltd. accepts no liability for the
consequences of any person acting on such information prior to the receipt
of such confirmation. If you are not the intended recipient, you are not
authorised to, and must not use, disclose, copy, distribute, or retain this
message, its attachments or any part thereof. Any views or opinions
expressed are those of the author and do not necessarily reflect the
opinions of Concentric Controls Ltd.

Concentric Controls Ltd. www.concentriccontrols.com
Priory Road, Aston, Birmingham B6 7LH, UK
Tel: +44 (0)121 327 1662 Fax: +44 (0)121 328 2498




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links


Yahoo! Groups SponsorADVERTISEMENT


---------------------------------
Yahoo! Groups Links

To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.




---------------------------------
Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes

[Non-text portions of this message have been removed]
Yes, and it works much better with 2003 then it did with 2000.


-----Original Message-----
From: Darren Stevens [mailto:stevens9992003@...]
Sent: Monday, January 19, 2004 10:56 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Terminal Services


Do your users print locally using the Windws 2003 TS client?

"Leonard, Jeremy" <jleonard@...> wrote:We have 41 users on our T.S. running Windows 2003. 25 of them are Data collections and the other 10 are normal desktop users. We have 6 people who connect to it from home. We have a HP 6000 Netserver. 6 Xeon 1.2G Processors with 2MB L2 Cache and 8GB of Ram with a 1GB nic. I rarely see the server go over 15% processor usage. Memory runs around 2GB usage. We are on Vantage 6.0. I got the box very cheep on Ebay otherwise it would really be overkill for us. I ran 23 DataCollection terminals on a Dual AMD 1.7G PC with 2GB ram with no problem before I upgraded to the HP 6000. Terminal server makes the Vantage upgrades allot easier.

Jeremy Leonard
IT Manager
K-T Corporation


-----Original Message-----
From: janes925 [mailto:nschultz@...]
Sent: Monday, January 19, 2004 8:16 AM
To: vantage@yahoogroups.com
Subject: [Vantage] OT: Terminal Services


We are looking into updating to terminal services and I was
wondering how many concurrent vantage users can access vantage
through terminal services. What size server do you use? Are you
limited in the amount of users through terminal services? We are
currently on V5.0 and will be updating to 6.0 or 6.1 this spring.
Any response would be really appreaciated. Thanks.




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Yahoo! Groups Links

To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links



---------------------------------
Yahoo! Groups Links

To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.




---------------------------------
Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes

[Non-text portions of this message have been removed]


Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links


Yahoo! Groups Links

To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Our users are mostly internal with a few external users connecting over VPN
tunnels on an SDSL internet connection.

Paul.


----- Original Message -----
From: "Darren Stevens" <stevens9992003@...>
To: <vantage@yahoogroups.com>
Sent: Monday, January 19, 2004 4:38 PM
Subject: Re: [Vantage] OT: Terminal Services


> Are they internal TS sessions or are they accessing the servers through a
T-1 line.
>
> Paul Oliver <p.oliver@...> wrote:We run two Windows
2000 terminal servers, they are home-built machines with
> dual AMD Athlon MP 2400+ processors, 1Gb RAM and dual 100Mbit NICs. User
> profiles are stores on a NAS appliance on the network so are available
> whether the user logs into one of the terminal servers or any other
Windows
> 2000 machine.
>
> The Vantage clients don't put a massive load on the terminal servers but
our
> users have a lot of Access databases which do sap quite a bit of power.
>
> Paul.
>

This e-Mail (and any attachments) should only be read by the intended
addressee(s) and not be relied upon without subsequent written confirmation
of its contents. Concentric Controls Ltd. accepts no liability for the
consequences of any person acting on such information prior to the receipt
of such confirmation. If you are not the intended recipient, you are not
authorised to, and must not use, disclose, copy, distribute, or retain this
message, its attachments or any part thereof. Any views or opinions
expressed are those of the author and do not necessarily reflect the
opinions of Concentric Controls Ltd.

Concentric Controls Ltd. www.concentriccontrols.com
Priory Road, Aston, Birmingham B6 7LH, UK
Tel: +44 (0)121 327 1662 Fax: +44 (0)121 328 2498
--- In vantage@yahoogroups.com, "Leonard, Jeremy" <jleonard@k...>
wrote:
> We have 41 users on our T.S. running Windows 2003. 25 of them are
Data collections and the other 10 are normal desktop users. We have
6 people who connect to it from home.

Jeremy,
I am looking into using T.S. for 31 Vantage users (21 office and 10
d.c.) I am having trouble finding out how many terminal servers will
be needed. I have hearing that it would only take care of 15-20
users (something to do my MS licensing??), meaning I would need 2. I
see you have 41 users, is that all on one T.S.? It will be on a
Compaq Proliant server MI370 G3 Xeon/2.8ghz with 4gb RAM. The
application server will have dual processor, does the T.S. need dual
processor also? Any thing special I need to know about MS licensing?

Thank you!!
Ann Rohyans
AMFAB
You can contact Softchoice 800 268 7638 and they can tell you all you
want to know about 2003 licensing for TS.



Sue

-----Original Message-----
From: amfabllc [mailto:amfab@...]
Sent: Tuesday, January 27, 2004 8:14 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: OT: Terminal Services



--- In vantage@yahoogroups.com, "Leonard, Jeremy" <jleonard@k...>
wrote:
> We have 41 users on our T.S. running Windows 2003. 25 of them are
Data collections and the other 10 are normal desktop users. We have
6 people who connect to it from home.

Jeremy,
I am looking into using T.S. for 31 Vantage users (21 office and 10
d.c.) I am having trouble finding out how many terminal servers will
be needed. I have hearing that it would only take care of 15-20
users (something to do my MS licensing??), meaning I would need 2. I
see you have 41 users, is that all on one T.S.? It will be on a
Compaq Proliant server MI370 G3 Xeon/2.8ghz with 4gb RAM. The
application server will have dual processor, does the T.S. need dual
processor also? Any thing special I need to know about MS licensing?

Thank you!!
Ann Rohyans
AMFAB



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links





Yahoo! Groups Sponsor

ADVERTISEMENT
click here
<http://rd.yahoo.com/SIG=12c1bkrk0/M=268585.4464812.5643763.1261774/D=eg
roupweb/S=1705007183:HM/EXP=1075306461/A=1950449/R=0/*http:/ashnin.com/c
lk/muryutaitakenattogyo?YH=4464812&yhad=1950449>


<http://us.adserver.yahoo.com/l?M=268585.4464812.5643763.1261774/D=egrou
pmail/S=:HM/A=1950449/rand=530271343>



_____

Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .



[Non-text portions of this message have been removed]
We use RDP and TS to run some Report Builder reports. We export some of the
reports to a file on the server. How do you cut the file from the server to
the remote PC? Cut and Paste doesn't seem to work. I could email the file
but I don't want to set up email on the server for security reasons.



Sincerely,



Mitchell Kirby

Riten Industries, Inc.

<http://www.riten.com/> www.riten.com



740-333-8719 Direct

800-338-0027 Sales

800-338-0717 FAX





[Non-text portions of this message have been removed]
What is the OS of your Terminal Server.

Windows 2003 has the ability to map to the client drives.



From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Mitchell Kirby
Sent: Thursday, April 26, 2007 8:51 AM
To: vantage@yahoogroups.com
Subject: [Vantage] OT: Terminal Services



We use RDP and TS to run some Report Builder reports. We export some of
the
reports to a file on the server. How do you cut the file from the server
to
the remote PC? Cut and Paste doesn't seem to work. I could email the
file
but I don't want to set up email on the server for security reasons.

Sincerely,

Mitchell Kirby

Riten Industries, Inc.

<http://www.riten.com/> www.riten.com

740-333-8719 Direct

800-338-0027 Sales

800-338-0717 FAX

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
You will not be able to "cut-n-paste" a file - only text. In the RDP
client you have to enable your local Disk Drives to be mapped....in the
RDP client Local Resources tab, bottom part of the screen in "Local
Resources" check Disk Drive.



When connected, the drives will show up in the windows explorer on the
terminal server....there you can cut-n-paste. My experience has been
that it is faster to PDF it and mail it...hopefully you'll have a better
experience with this.



Thanks,



Jason Claggett

Microsoft Small Business Specialist

MCP #3856159

2W Technologies, LLC

317.578.2393

jason@...

________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Mitchell Kirby
Sent: Thursday, April 26, 2007 8:51 AM
To: vantage@yahoogroups.com
Subject: [Vantage] OT: Terminal Services



We use RDP and TS to run some Report Builder reports. We export some of
the
reports to a file on the server. How do you cut the file from the server
to
the remote PC? Cut and Paste doesn't seem to work. I could email the
file
but I don't want to set up email on the server for security reasons.

Sincerely,

Mitchell Kirby

Riten Industries, Inc.

<http://www.riten.com/ <http://www.riten.com/> > www.riten.com

740-333-8719 Direct

800-338-0027 Sales

800-338-0717 FAX

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
I'm in same boat. Been toying with idea of exporting/printing to a folder accessable via FTP and letting remote user drag/drop from browser to remote PC. But this is about #14 on my hot list at the moment. If anyone else has done this please share experience. Another thought I've had (and easier to try) for our Citrix setup (and maybe TS if local printer is seen) would be to setup a local printer as a "to file" printer. Probably not good for spreadsheets, etc... but maybe OK for print formatted items.
-Todd C.


-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf Of Mitchell Kirby
Sent: Thursday, April 26, 2007 7:51 AM
To: vantage@yahoogroups.com
Subject: [Vantage] OT: Terminal Services



We use RDP and TS to run some Report Builder reports. We export some of the
reports to a file on the server. How do you cut the file from the server to
the remote PC? Cut and Paste doesn't seem to work. I could email the file
but I don't want to set up email on the server for security reasons.

Sincerely,

Mitchell Kirby

Riten Industries, Inc.

< http://www.riten <http://www.riten.com/> com/> www.riten.com

740-333-8719 Direct

800-338-0027 Sales

800-338-0717 FAX

[Non-text portions of this message have been removed]







[Non-text portions of this message have been removed]
One additional thing I left out. You will need to make sure the user
account(s) on the server has the "Connect client drives at login"
checked under the Environment tab in their profile.



I am assuming you are using Windows Server 2003...please let me know if
you are using a different TS.



Thanks,



Jason Claggett

Microsoft Small Business Specialist

MCP #3856159

2W Technologies, LLC

317.578.2393

jason@...

________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Mitchell Kirby
Sent: Thursday, April 26, 2007 8:51 AM
To: vantage@yahoogroups.com
Subject: [Vantage] OT: Terminal Services



We use RDP and TS to run some Report Builder reports. We export some of
the
reports to a file on the server. How do you cut the file from the server
to
the remote PC? Cut and Paste doesn't seem to work. I could email the
file
but I don't want to set up email on the server for security reasons.

Sincerely,

Mitchell Kirby

Riten Industries, Inc.

<http://www.riten.com/ <http://www.riten.com/> > www.riten.com

740-333-8719 Direct

800-338-0027 Sales

800-338-0717 FAX

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
I use a pdf printer which is installed on the client computer, and
mapped from the citrix client. The citrix client treats it like any
other mapped client printer. The client computer initiates the pdf
program (PrimoPdf).



Bruce Butler

IT Manager

Knappe & Koester, Inc.

_____

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Todd Caughey
Sent: Thursday, April 26, 2007 9:01 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Terminal Services



I'm in same boat. Been toying with idea of exporting/printing to a
folder accessable via FTP and letting remote user drag/drop from browser
to remote PC. But this is about #14 on my hot list at the moment. If
anyone else has done this please share experience. Another thought I've
had (and easier to try) for our Citrix setup (and maybe TS if local
printer is seen) would be to setup a local printer as a "to file"
printer. Probably not good for spreadsheets, etc... but maybe OK for
print formatted items.
-Todd C.


-----Original Message-----
From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ]On
Behalf Of Mitchell Kirby
Sent: Thursday, April 26, 2007 7:51 AM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: [Vantage] OT: Terminal Services

We use RDP and TS to run some Report Builder reports. We export some of
the
reports to a file on the server. How do you cut the file from the server
to
the remote PC? Cut and Paste doesn't seem to work. I could email the
file
but I don't want to set up email on the server for security reasons.

Sincerely,

Mitchell Kirby

Riten Industries, Inc.

< http://www.riten <http://www.riten.com/ <http://www.riten.com/> >
com/> www.riten.com

740-333-8719 Direct

800-338-0027 Sales

800-338-0717 FAX

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
Todd,



I typically encourage the use of SharePoint for those customers on SBS
2003 as this allows you to publish the files so others can download. If
you are looking to send a file to an outside source (vendor, supplier,
customers, etc.), the SharePoint licenses that come with SBS 2003 can
ONLY be used for internal communications - for external communication,
Microsoft requires you to buy connector licenses.



Thanks,



Jason Claggett

Microsoft Small Business Specialist

MCP #3856159

2W Technologies, LLC

317.578.2393

jason@...

________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Todd Caughey
Sent: Thursday, April 26, 2007 9:01 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Terminal Services



I'm in same boat. Been toying with idea of exporting/printing to a
folder accessable via FTP and letting remote user drag/drop from browser
to remote PC. But this is about #14 on my hot list at the moment. If
anyone else has done this please share experience. Another thought I've
had (and easier to try) for our Citrix setup (and maybe TS if local
printer is seen) would be to setup a local printer as a "to file"
printer. Probably not good for spreadsheets, etc... but maybe OK for
print formatted items.
-Todd C.


-----Original Message-----
From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ]On
Behalf Of Mitchell Kirby
Sent: Thursday, April 26, 2007 7:51 AM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: [Vantage] OT: Terminal Services

We use RDP and TS to run some Report Builder reports. We export some of
the
reports to a file on the server. How do you cut the file from the server
to
the remote PC? Cut and Paste doesn't seem to work. I could email the
file
but I don't want to set up email on the server for security reasons.

Sincerely,

Mitchell Kirby

Riten Industries, Inc.

< http://www.riten <http://www.riten.com/ <http://www.riten.com/> >
com/> www.riten.com

740-333-8719 Direct

800-338-0027 Sales

800-338-0717 FAX

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
We gave up on SBS back at Windows-NT. Too many restrictions that would not work here with multiple AD servers. But SharePoint may still be an option once we get to Office 2007. Exchange 2007 will be live in a few weeks (with Outlook 2003 for now). I understand the hooks in Outlook/Office 2007 to SharePoint may make it worthwhile for us. We are examining techniques for an internal knowledgebase. A project for 2008 though.
-Todd C.


-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf Of Jason Claggett
Sent: Thursday, April 26, 2007 8:38 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Terminal Services



Todd,

I typically encourage the use of SharePoint for those customers on SBS
2003 as this allows you to publish the files so others can download. If
you are looking to send a file to an outside source (vendor, supplier,
customers, etc.), the SharePoint licenses that come with SBS 2003 can
ONLY be used for internal communications - for external communication,
Microsoft requires you to buy connector licenses.

Thanks,

Jason Claggett

Microsoft Small Business Specialist

MCP #3856159

2W Technologies, LLC

317.578.2393

jason@2wtech. <mailto:jason%402wtech.com> com

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com [mailto: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On Behalf
Of Todd Caughey
Sent: Thursday, April 26, 2007 9:01 AM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: RE: [Vantage] OT: Terminal Services

I'm in same boat. Been toying with idea of exporting/printing to a
folder accessable via FTP and letting remote user drag/drop from browser
to remote PC. But this is about #14 on my hot list at the moment. If
anyone else has done this please share experience. Another thought I've
had (and easier to try) for our Citrix setup (and maybe TS if local
printer is seen) would be to setup a local printer as a "to file"
printer. Probably not good for spreadsheets, etc... but maybe OK for
print formatted items.
-Todd C.

-----Original Message-----
From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com <mailto:vantage%40yahoogroups.com>
[mailto: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com <mailto:vantage%40yahoogroups.com> ]On
Behalf Of Mitchell Kirby
Sent: Thursday, April 26, 2007 7:51 AM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com <mailto:vantage%40yahoogroups.com>
Subject: [Vantage] OT: Terminal Services

We use RDP and TS to run some Report Builder reports. We export some of
the
reports to a file on the server. How do you cut the file from the server
to
the remote PC? Cut and Paste doesn't seem to work. I could email the
file
but I don't want to set up email on the server for security reasons.

Sincerely,

Mitchell Kirby

Riten Industries, Inc.

< http://www.riten < http://www.riten <http://www.riten.com/> com/ < http://www.riten <http://www.riten.com/> com/> >
com/> www.riten.com

740-333-8719 Direct

800-338-0027 Sales

800-338-0717 FAX

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]







[Non-text portions of this message have been removed]
Guys
Go into the Terminal services configuration on the TS server. Client
Sessions tab -- put a check in clipboard mapping and now you can cut and
paste.

Cliff

________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Bruce Butler
Sent: Thursday, April 26, 2007 6:39 AM
To: vantage@yahoogroups.com
Subject: [BULK] RE: [Vantage] OT: Terminal Services
Importance: Low



I use a pdf printer which is installed on the client computer, and
mapped from the citrix client. The citrix client treats it like any
other mapped client printer. The client computer initiates the pdf
program (PrimoPdf).

Bruce Butler

IT Manager

Knappe & Koester, Inc.

_____

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf
Of Todd Caughey
Sent: Thursday, April 26, 2007 9:01 AM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] OT: Terminal Services

I'm in same boat. Been toying with idea of exporting/printing to a
folder accessable via FTP and letting remote user drag/drop from browser
to remote PC. But this is about #14 on my hot list at the moment. If
anyone else has done this please share experience. Another thought I've
had (and easier to try) for our Citrix setup (and maybe TS if local
printer is seen) would be to setup a local printer as a "to file"
printer. Probably not good for spreadsheets, etc... but maybe OK for
print formatted items.
-Todd C.

-----Original Message-----
From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> ]On
Behalf Of Mitchell Kirby
Sent: Thursday, April 26, 2007 7:51 AM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
Subject: [Vantage] OT: Terminal Services

We use RDP and TS to run some Report Builder reports. We export some of
the
reports to a file on the server. How do you cut the file from the server
to
the remote PC? Cut and Paste doesn't seem to work. I could email the
file
but I don't want to set up email on the server for security reasons.

Sincerely,

Mitchell Kirby

Riten Industries, Inc.

< http://www.riten <http://www.riten.com/ <http://www.riten.com/>
<http://www.riten.com/ <http://www.riten.com/> > >
com/> www.riten.com

740-333-8719 Direct

800-338-0027 Sales

800-338-0717 FAX

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]






[Non-text portions of this message have been removed]