Chicago User Summit Aug 9

Yahoo Archive
1
Hope we manage to find one another. It would be nice to put some faces to the names I see here. And talk about where you are release-wise and the features you're using.
Linda

--- In vantage@yahoogroups.com, "timlester67" <tlester@...> wrote:
>
> We are thinking of sending a couple of people, have not decided yet.
>
> Tim Lester
>
>
> --- In vantage@yahoogroups.com, Karen Schoenung <kschoenung@> wrote:
> >
> > I will be going.
> >
> > -----Original Message-----
> > From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of John Kreger
> > Sent: Tuesday, July 31, 2012 8:17 AM
> > To: vantage@yahoogroups.com
> > Subject: Re: [Vantage] Re: Chicago User Summit Aug 9
> >
> > We're sending 5 people. Went live in January so now that we're stable, we're ready to start pushing what we can do with the software.
> >
> > On Tue, Jul 31, 2012 at 8:14 AM, Manasa Reddy <manasa@> wrote:
> >
> > > **
> > >
> > >
> > > I'll be there...
> > >
> > > M. Manasa Reddy
> > > manasa@<mailto:manasa@>
> > > 630.806.2000 x1515
> > >
> > >
> > > From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
> > > Behalf Of Hyndman
> > > Sent: Tuesday, July 31, 2012 8:08 AM
> > > To: vantage@yahoogroups.com
> > > Subject: [Vantage] Re: Chicago User Summit Aug 9
> > >
> > > Anyone from this group going to Chicago?
> > > --- In vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>,
> > > "Hyndman" <hyndmaninc@<mailto:hyndmaninc@>> wrote:
> > > >
> > > > Anyone from this Group going? I'd appreciate an opportunity to meet you.
> > > We are on 9.04.507a and I'll be analyzing the conversion to 9.05xx for
> > > next year. Also want to explore EDI. Would like to network with others
> > > who have experience in these areas. We are a wire and resistance
> > > heating elements manufacturer in Fort Wayne, IN. I've been analyzing
> > > and guiding the development of time phased for continuous form
> > > material (our material is wire but the concepts will work for other
> > > forms) within Epicor. Be happy to share ideas on this process.
> > > > Linda Hite-Mills
> > > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
> > (1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
> >
>
2
Anyone from this Group going? I'd appreciate an opportunity to meet you. We are on 9.04.507a and I'll be analyzing the conversion to 9.05xx for next year. Also want to explore EDI. Would like to network with others who have experience in these areas. We are a wire and resistance heating elements manufacturer in Fort Wayne, IN. I've been analyzing and guiding the development of time phased for continuous form material (our material is wire but the concepts will work for other forms) within Epicor. Be happy to share ideas on this process.
Linda Hite-Mills
3
I'll be attending the Minneapolis one..



Rob Bucek
Production Control Manager
PH: (715) 284-5376 ext 311
Mobile: (715)896-0590
FAX: (715)284-4084
[Description: cid:1.234354861@...]<http://www.dsmfg.com/>
(Click the logo to view our site)<http://www.dsmfg.com/>

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Hyndman
Sent: Friday, June 22, 2012 9:43 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Chicago User Summit Aug 9



Anyone from this Group going? I'd appreciate an opportunity to meet you. We are on 9.04.507a and I'll be analyzing the conversion to 9.05xx for next year. Also want to explore EDI. Would like to network with others who have experience in these areas. We are a wire and resistance heating elements manufacturer in Fort Wayne, IN. I've been analyzing and guiding the development of time phased for continuous form material (our material is wire but the concepts will work for other forms) within Epicor. Be happy to share ideas on this process.
Linda Hite-Mills



[Non-text portions of this message have been removed]
4
When is the Minneapolis event? Haven't gotten an e-mail about that.
On Jun 22, 2012 11:27 AM, "Rob Bucek" <rbucek@...> wrote:

> **
>
>
> I'll be attending the Minneapolis one..
>
> Rob Bucek
> Production Control Manager
> PH: (715) 284-5376 ext 311
> Mobile: (715)896-0590
> FAX: (715)284-4084
> [Description: cid:1.234354861@...]<
> http://www.dsmfg.com/>
> (Click the logo to view our site)<http://www.dsmfg.com/>
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
> Of Hyndman
> Sent: Friday, June 22, 2012 9:43 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Chicago User Summit Aug 9
>
> Anyone from this Group going? I'd appreciate an opportunity to meet you.
> We are on 9.04.507a and I'll be analyzing the conversion to 9.05xx for next
> year. Also want to explore EDI. Would like to network with others who have
> experience in these areas. We are a wire and resistance heating elements
> manufacturer in Fort Wayne, IN. I've been analyzing and guiding the
> development of time phased for continuous form material (our material is
> wire but the concepts will work for other forms) within Epicor. Be happy to
> share ideas on this process.
> Linda Hite-Mills
>
> [Non-text portions of this message have been removed]
>
>
>


[Non-text portions of this message have been removed]
5
August 7th

Rob Bucek
Production Control Manager
PH: (715) 284-5376 ext 311
Mobile: (715)896-0590
FAX: (715)284-4084

(Click the logo to view our site)

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of John Kreger
Sent: Friday, June 22, 2012 11:47 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Chicago User Summit Aug 9

When is the Minneapolis event? Haven't gotten an e-mail about that.
On Jun 22, 2012 11:27 AM, "Rob Bucek" <rbucek@...> wrote:

> **
>
>
> I'll be attending the Minneapolis one..
>
> Rob Bucek
> Production Control Manager
> PH: (715) 284-5376 ext 311
> Mobile: (715)896-0590
> FAX: (715)284-4084
> [Description: cid:1.234354861@...]<
> http://www.dsmfg.com/>
> (Click the logo to view our site)<http://www.dsmfg.com/>
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
> Behalf Of Hyndman
> Sent: Friday, June 22, 2012 9:43 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Chicago User Summit Aug 9
>
> Anyone from this Group going? I'd appreciate an opportunity to meet you.
> We are on 9.04.507a and I'll be analyzing the conversion to 9.05xx for
> next year. Also want to explore EDI. Would like to network with others
> who have experience in these areas. We are a wire and resistance
> heating elements manufacturer in Fort Wayne, IN. I've been analyzing
> and guiding the development of time phased for continuous form
> material (our material is wire but the concepts will work for other
> forms) within Epicor. Be happy to share ideas on this process.
> Linda Hite-Mills
>
> [Non-text portions of this message have been removed]
>
>
>


[Non-text portions of this message have been removed]



------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
6
Anyone from this group going to Chicago?
--- In vantage@yahoogroups.com, "Hyndman" <hyndmaninc@...> wrote:
>
> Anyone from this Group going? I'd appreciate an opportunity to meet you. We are on 9.04.507a and I'll be analyzing the conversion to 9.05xx for next year. Also want to explore EDI. Would like to network with others who have experience in these areas. We are a wire and resistance heating elements manufacturer in Fort Wayne, IN. I've been analyzing and guiding the development of time phased for continuous form material (our material is wire but the concepts will work for other forms) within Epicor. Be happy to share ideas on this process.
> Linda Hite-Mills
>
7
I'm thinking about it. Trying to weigh the benefits.



Beth Rye

IT Director

CIGNYS
Email: <mailto:brye@...> brye@...



***ITAR NOTICE***

This e-mail and/or the attached documents may contain technical data within
the definition of the International Traffic in Arms regulations, and are
subject to the export control laws of the US Government. Transfer of this
data by any means to a foreign person, whether in the US or abroad, without
an export license or other approval from the US Department of State, is
prohibited. No portion of this e-mail or its attachment(s) may be reproduced
without written consent of CIGNYS. If you are not the intended recipient or
believe that you may have received this document in error, please notify the
sender and delete this e-mail and any attachments immediately.



From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Hyndman
Sent: Tuesday, July 31, 2012 9:08 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: Chicago User Summit Aug 9






Anyone from this group going to Chicago?
--- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ,
"Hyndman" <hyndmaninc@...> wrote:
>
> Anyone from this Group going? I'd appreciate an opportunity to meet you.
We are on 9.04.507a and I'll be analyzing the conversion to 9.05xx for next
year. Also want to explore EDI. Would like to network with others who have
experience in these areas. We are a wire and resistance heating elements
manufacturer in Fort Wayne, IN. I've been analyzing and guiding the
development of time phased for continuous form material (our material is
wire but the concepts will work for other forms) within Epicor. Be happy to
share ideas on this process.
> Linda Hite-Mills
>





[Non-text portions of this message have been removed]
8
I'll be there...




M. Manasa Reddy
manasa@...<mailto:manasa@...>
630.806.2000 x1515

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Hyndman
Sent: Tuesday, July 31, 2012 8:08 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: Chicago User Summit Aug 9



Anyone from this group going to Chicago?
--- In vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>, "Hyndman" <hyndmaninc@...<mailto:hyndmaninc@...>> wrote:
>
> Anyone from this Group going? I'd appreciate an opportunity to meet you. We are on 9.04.507a and I'll be analyzing the conversion to 9.05xx for next year. Also want to explore EDI. Would like to network with others who have experience in these areas. We are a wire and resistance heating elements manufacturer in Fort Wayne, IN. I've been analyzing and guiding the development of time phased for continuous form material (our material is wire but the concepts will work for other forms) within Epicor. Be happy to share ideas on this process.
> Linda Hite-Mills
>



[Non-text portions of this message have been removed]
9
We're sending 5 people. Went live in January so now that we're stable,
we're ready to start pushing what we can do with the software.

On Tue, Jul 31, 2012 at 8:14 AM, Manasa Reddy <manasa@...> wrote:

> **
>
>
> I'll be there...
>
> M. Manasa Reddy
> manasa@...<mailto:manasa@...>
> 630.806.2000 x1515
>
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
> Of Hyndman
> Sent: Tuesday, July 31, 2012 8:08 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Re: Chicago User Summit Aug 9
>
> Anyone from this group going to Chicago?
> --- In vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>,
> "Hyndman" <hyndmaninc@...<mailto:hyndmaninc@...>> wrote:
> >
> > Anyone from this Group going? I'd appreciate an opportunity to meet you.
> We are on 9.04.507a and I'll be analyzing the conversion to 9.05xx for next
> year. Also want to explore EDI. Would like to network with others who have
> experience in these areas. We are a wire and resistance heating elements
> manufacturer in Fort Wayne, IN. I've been analyzing and guiding the
> development of time phased for continuous form material (our material is
> wire but the concepts will work for other forms) within Epicor. Be happy to
> share ideas on this process.
> > Linda Hite-Mills
> >
>
> [Non-text portions of this message have been removed]
>
>
>


[Non-text portions of this message have been removed]
10
I will be going.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of John Kreger
Sent: Tuesday, July 31, 2012 8:17 AM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Re: Chicago User Summit Aug 9

We're sending 5 people. Went live in January so now that we're stable, we're ready to start pushing what we can do with the software.

On Tue, Jul 31, 2012 at 8:14 AM, Manasa Reddy <manasa@...> wrote:

> **
>
>
> I'll be there...
>
> M. Manasa Reddy
> manasa@...<mailto:manasa@...>
> 630.806.2000 x1515
>
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
> Behalf Of Hyndman
> Sent: Tuesday, July 31, 2012 8:08 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Re: Chicago User Summit Aug 9
>
> Anyone from this group going to Chicago?
> --- In vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>,
> "Hyndman" <hyndmaninc@...<mailto:hyndmaninc@...>> wrote:
> >
> > Anyone from this Group going? I'd appreciate an opportunity to meet you.
> We are on 9.04.507a and I'll be analyzing the conversion to 9.05xx for
> next year. Also want to explore EDI. Would like to network with others
> who have experience in these areas. We are a wire and resistance
> heating elements manufacturer in Fort Wayne, IN. I've been analyzing
> and guiding the development of time phased for continuous form
> material (our material is wire but the concepts will work for other
> forms) within Epicor. Be happy to share ideas on this process.
> > Linda Hite-Mills
> >
>
> [Non-text portions of this message have been removed]
>
>
>


[Non-text portions of this message have been removed]



------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
11
We are thinking of sending a couple of people, have not decided yet.

Tim Lester


--- In vantage@yahoogroups.com, Karen Schoenung <kschoenung@...> wrote:
>
> I will be going.
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of John Kreger
> Sent: Tuesday, July 31, 2012 8:17 AM
> To: vantage@yahoogroups.com
> Subject: Re: [Vantage] Re: Chicago User Summit Aug 9
>
> We're sending 5 people. Went live in January so now that we're stable, we're ready to start pushing what we can do with the software.
>
> On Tue, Jul 31, 2012 at 8:14 AM, Manasa Reddy <manasa@...> wrote:
>
> > **
> >
> >
> > I'll be there...
> >
> > M. Manasa Reddy
> > manasa@...<mailto:manasa@...>
> > 630.806.2000 x1515
> >
> >
> > From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
> > Behalf Of Hyndman
> > Sent: Tuesday, July 31, 2012 8:08 AM
> > To: vantage@yahoogroups.com
> > Subject: [Vantage] Re: Chicago User Summit Aug 9
> >
> > Anyone from this group going to Chicago?
> > --- In vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>,
> > "Hyndman" <hyndmaninc@<mailto:hyndmaninc@>> wrote:
> > >
> > > Anyone from this Group going? I'd appreciate an opportunity to meet you.
> > We are on 9.04.507a and I'll be analyzing the conversion to 9.05xx for
> > next year. Also want to explore EDI. Would like to network with others
> > who have experience in these areas. We are a wire and resistance
> > heating elements manufacturer in Fort Wayne, IN. I've been analyzing
> > and guiding the development of time phased for continuous form
> > material (our material is wire but the concepts will work for other
> > forms) within Epicor. Be happy to share ideas on this process.
> > > Linda Hite-Mills
> > >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>