Crystal Linking Crash

Yahoo Archive
1
It's for sure in a strange place!

ftp://ftpmpls.epicor.com/vantage/Christina/

SP 0-4 are there, and you have to download 5 from SAP. SP 3 fixed my linking issue. I didn't yet install 5.

--- In vantage@yahoogroups.com, "Vic Drecchio" <vic.drecchio@...> wrote:
>
> Thanks for following up. Do you still have the FTP location? I'd like to
> grab them for the future and put them in safe storage.
>
>
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
> Anon
> Sent: Wednesday, August 22, 2012 9:51 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Re: Crystal Linking Crash
>
>
>
>
>
> Just to follow up on this. I did call Epicor support, and they pointed me to
> a FTP folder with all 5 service packs. After installing them (6 hours later)
> i was able to do the linking without issue, and some other crashing issues
> went away too. Yippie skippie!
>
> --- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> , "Vic
> Drecchio" <vic.drecchio@> wrote:
> >
> > Yep. What I do is rebuild the links completely. Delete them all and then
> > re-link. And don't do it while any data is previewed or saved in the
> > report.
> >
> >
> >
> > From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> [mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
> Behalf Of
> > Anon
> > Sent: Monday, August 20, 2012 11:08 AM
> > To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> > Subject: [Vantage] Crystal Linking Crash
> >
> >
> >
> >
> >
> > Every time I try to link tables in a crystal report as soon as I click ok
> > crystal closes and crashes? Anyone else experience this ever?
> >
> >
> >
> > No virus found in this message.
> > Checked by AVG - www.avg.com
> > Version: 2012.0.2197 / Virus Database: 2437/5211 - Release Date: 08/20/12
> >
> >
> >
> >
> > -----
> > No virus found in this message.
> > Checked by AVG - www.avg.com
> > Version: 2012.0.2197 / Virus Database: 2437/5211 - Release Date: 08/20/12
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.2197 / Virus Database: 2437/5217 - Release Date: 08/22/12
>
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.2197 / Virus Database: 2437/5217 - Release Date: 08/22/12
>
> [Non-text portions of this message have been removed]
>
2
Every time I try to link tables in a crystal report as soon as I click ok crystal closes and crashes? Anyone else experience this ever?
3
Yep. What I do is rebuild the links completely. Delete them all and then
re-link. And don't do it while any data is previewed or saved in the
report.



From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Anon
Sent: Monday, August 20, 2012 11:08 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Crystal Linking Crash





Every time I try to link tables in a crystal report as soon as I click ok
crystal closes and crashes? Anyone else experience this ever?



No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2197 / Virus Database: 2437/5211 - Release Date: 08/20/12




-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2197 / Virus Database: 2437/5211 - Release Date: 08/20/12

[Non-text portions of this message have been removed]
4
Crystal designer is unhappy with a dual monitor setup, but worked OK if
you kept the window on your primary monitor only. I've sworn at that
exact symptom every time I forgot.



Brian.



From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Anon
Sent: Monday, August 20, 2012 11:08 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Crystal Linking Crash





Every time I try to link tables in a crystal report as soon as I click
ok crystal closes and crashes? Anyone else experience this ever?





[Non-text portions of this message have been removed]
5
Is this something I should bother taking up with crystal... This is the invoice report it's going to take me forever :S

--- In vantage@yahoogroups.com, "Vic Drecchio" <vic.drecchio@...> wrote:
>
> Yep. What I do is rebuild the links completely. Delete them all and then
> re-link. And don't do it while any data is previewed or saved in the
> report.
>
>
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
> Anon
> Sent: Monday, August 20, 2012 11:08 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Crystal Linking Crash
>
>
>
>
>
> Every time I try to link tables in a crystal report as soon as I click ok
> crystal closes and crashes? Anyone else experience this ever?
>
>
>
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.2197 / Virus Database: 2437/5211 - Release Date: 08/20/12
>
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.2197 / Virus Database: 2437/5211 - Release Date: 08/20/12
>
> [Non-text portions of this message have been removed]
>
6
I am doing the editing on our SQL server in a Terminal Services window. I don't think that's the issue in this case, but I'll stick that one under the ol' hat ha ha

--- In vantage@yahoogroups.com, "Brian Roberts" <broberts@...> wrote:
>
> Crystal designer is unhappy with a dual monitor setup, but worked OK if
> you kept the window on your primary monitor only. I've sworn at that
> exact symptom every time I forgot.
>
>
>
> Brian.
>
>
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
> Of Anon
> Sent: Monday, August 20, 2012 11:08 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Crystal Linking Crash
>
>
>
>
>
> Every time I try to link tables in a crystal report as soon as I click
> ok crystal closes and crashes? Anyone else experience this ever?
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
7
Are you running the current SP for crystal? It can be a little buggy even
at its best, but after SP4 it got a LOT more stable. If you're still using
one of the older SPs or just the version Epicor sent you, update it and see
if that doesn't help.*
*

On Mon, Aug 20, 2012 at 11:30 AM, Anon
<epicor-team@...>wrote:

> **
>
>
> I am doing the editing on our SQL server in a Terminal Services window. I
> don't think that's the issue in this case, but I'll stick that one under
> the ol' hat ha ha
>
>
> --- In vantage@yahoogroups.com, "Brian Roberts" <broberts@...> wrote:
> >
> > Crystal designer is unhappy with a dual monitor setup, but worked OK if
> > you kept the window on your primary monitor only. I've sworn at that
> > exact symptom every time I forgot.
> >
> >
> >
> > Brian.
> >
> >
> >
> > From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
> > Of Anon
> > Sent: Monday, August 20, 2012 11:08 AM
> > To: vantage@yahoogroups.com
> > Subject: [Vantage] Crystal Linking Crash
> >
> >
> >
> >
> >
> > Every time I try to link tables in a crystal report as soon as I click
> > ok crystal closes and crashes? Anyone else experience this ever?
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>


[Non-text portions of this message have been removed]
8
Speaking of that, SAP has dropped all the incremental patches for XI R2.
You now must uninstall XIR2 and download the 1.3GB full build XIR2A from
their site. I just had to do this last week on one of my dev PCs because
the calendar control wasn't working.

I did their steps perfectly and I still cannot get it properly installed.
http://bit.ly/SIKOB0



-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
John Driggers
Sent: Monday, August 20, 2012 11:53 AM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Re: Crystal Linking Crash

Are you running the current SP for crystal? It can be a little buggy even at
its best, but after SP4 it got a LOT more stable. If you're still using one
of the older SPs or just the version Epicor sent you, update it and see if
that doesn't help.*
*

On Mon, Aug 20, 2012 at 11:30 AM, Anon
<epicor-team@...>wrote:

> **
>
>
> I am doing the editing on our SQL server in a Terminal Services
> window. I don't think that's the issue in this case, but I'll stick
> that one under the ol' hat ha ha
>
>
> --- In vantage@yahoogroups.com, "Brian Roberts" <broberts@...> wrote:
> >
> > Crystal designer is unhappy with a dual monitor setup, but worked OK
> > if you kept the window on your primary monitor only. I've sworn at
> > that exact symptom every time I forgot.
> >
> >
> >
> > Brian.
> >
> >
> >
> > From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
> > Behalf Of Anon
> > Sent: Monday, August 20, 2012 11:08 AM
> > To: vantage@yahoogroups.com
> > Subject: [Vantage] Crystal Linking Crash
> >
> >
> >
> >
> >
> > Every time I try to link tables in a crystal report as soon as I
> > click ok crystal closes and crashes? Anyone else experience this ever?
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>


[Non-text portions of this message have been removed]



------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links





-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2197 / Virus Database: 2437/5211 - Release Date: 08/20/12



-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2197 / Virus Database: 2437/5211 - Release Date: 08/20/12
9
3) If you have CR XI R2 SP3 or lower download the Crystal Reports XI R2A SP4 Incremental Build
4) Install the Crystal Reports XI R2A SP4 Incremental Build
5) Download the Crystal Reports XI R2A SP6 Incremental Build
6) Install the Crystal Reports XI R2A SP6 Incremental Build


--- In vantage@yahoogroups.com, "Vic Drecchio" <vic.drecchio@...> wrote:
>
> Speaking of that, SAP has dropped all the incremental patches for XI R2.
> You now must uninstall XIR2 and download the 1.3GB full build XIR2A from
> their site. I just had to do this last week on one of my dev PCs because
> the calendar control wasn't working.
>
> I did their steps perfectly and I still cannot get it properly installed.
> http://bit.ly/SIKOB0
>
>
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
> John Driggers
> Sent: Monday, August 20, 2012 11:53 AM
> To: vantage@yahoogroups.com
> Subject: Re: [Vantage] Re: Crystal Linking Crash
>
> Are you running the current SP for crystal? It can be a little buggy even at
> its best, but after SP4 it got a LOT more stable. If you're still using one
> of the older SPs or just the version Epicor sent you, update it and see if
> that doesn't help.*
> *
>
> On Mon, Aug 20, 2012 at 11:30 AM, Anon
> <epicor-team@...>wrote:
>
> > **
> >
> >
> > I am doing the editing on our SQL server in a Terminal Services
> > window. I don't think that's the issue in this case, but I'll stick
> > that one under the ol' hat ha ha
> >
> >
> > --- In vantage@yahoogroups.com, "Brian Roberts" <broberts@> wrote:
> > >
> > > Crystal designer is unhappy with a dual monitor setup, but worked OK
> > > if you kept the window on your primary monitor only. I've sworn at
> > > that exact symptom every time I forgot.
> > >
> > >
> > >
> > > Brian.
> > >
> > >
> > >
> > > From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
> > > Behalf Of Anon
> > > Sent: Monday, August 20, 2012 11:08 AM
> > > To: vantage@yahoogroups.com
> > > Subject: [Vantage] Crystal Linking Crash
> > >
> > >
> > >
> > >
> > >
> > > Every time I try to link tables in a crystal report as soon as I
> > > click ok crystal closes and crashes? Anyone else experience this ever?
> > >
> > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>
>
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.2197 / Virus Database: 2437/5211 - Release Date: 08/20/12
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.2197 / Virus Database: 2437/5211 - Release Date: 08/20/12
>
10
I'll install developer on my laptop and see how that goes. I am running SP4 on the server I got Epicor to help me get that running, I did have a lot of issues trying to patch up.

--- In vantage@yahoogroups.com, "Anon" <epicor-team@...> wrote:
>
> I am doing the editing on our SQL server in a Terminal Services window. I don't think that's the issue in this case, but I'll stick that one under the ol' hat ha ha
>
> --- In vantage@yahoogroups.com, "Brian Roberts" <broberts@> wrote:
> >
> > Crystal designer is unhappy with a dual monitor setup, but worked OK if
> > you kept the window on your primary monitor only. I've sworn at that
> > exact symptom every time I forgot.
> >
> >
> >
> > Brian.
> >
> >
> >
> > From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
> > Of Anon
> > Sent: Monday, August 20, 2012 11:08 AM
> > To: vantage@yahoogroups.com
> > Subject: [Vantage] Crystal Linking Crash
> >
> >
> >
> >
> >
> > Every time I try to link tables in a crystal report as soon as I click
> > ok crystal closes and crashes? Anyone else experience this ever?
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
11
Just to follow up on this. I did call Epicor support, and they pointed me to a FTP folder with all 5 service packs. After installing them (6 hours later) i was able to do the linking without issue, and some other crashing issues went away too. Yippie skippie!

--- In vantage@yahoogroups.com, "Vic Drecchio" <vic.drecchio@...> wrote:
>
> Yep. What I do is rebuild the links completely. Delete them all and then
> re-link. And don't do it while any data is previewed or saved in the
> report.
>
>
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
> Anon
> Sent: Monday, August 20, 2012 11:08 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Crystal Linking Crash
>
>
>
>
>
> Every time I try to link tables in a crystal report as soon as I click ok
> crystal closes and crashes? Anyone else experience this ever?
>
>
>
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.2197 / Virus Database: 2437/5211 - Release Date: 08/20/12
>
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.2197 / Virus Database: 2437/5211 - Release Date: 08/20/12
>
> [Non-text portions of this message have been removed]
>
12
Thanks for following up. Do you still have the FTP location? I'd like to
grab them for the future and put them in safe storage.



From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Anon
Sent: Wednesday, August 22, 2012 9:51 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: Crystal Linking Crash





Just to follow up on this. I did call Epicor support, and they pointed me to
a FTP folder with all 5 service packs. After installing them (6 hours later)
i was able to do the linking without issue, and some other crashing issues
went away too. Yippie skippie!

--- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> , "Vic
Drecchio" <vic.drecchio@...> wrote:
>
> Yep. What I do is rebuild the links completely. Delete them all and then
> re-link. And don't do it while any data is previewed or saved in the
> report.
>
>
>
> From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf Of
> Anon
> Sent: Monday, August 20, 2012 11:08 AM
> To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> Subject: [Vantage] Crystal Linking Crash
>
>
>
>
>
> Every time I try to link tables in a crystal report as soon as I click ok
> crystal closes and crashes? Anyone else experience this ever?
>
>
>
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.2197 / Virus Database: 2437/5211 - Release Date: 08/20/12
>
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.2197 / Virus Database: 2437/5211 - Release Date: 08/20/12
>
> [Non-text portions of this message have been removed]
>



No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2197 / Virus Database: 2437/5217 - Release Date: 08/22/12




-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2197 / Virus Database: 2437/5217 - Release Date: 08/22/12

[Non-text portions of this message have been removed]