----- Original Message -----
From: "Dina Hieber" <dhieber@...>
To: <vantage@yahoogroups.com>
Sent: Friday, November 09, 2012 10:58 AM
Subject: [Vantage] CRYSTAL REPORT VERSION??
> We finally are finishing up with the install for 9.05. Just realized, we did not think about the crystsal report version. What version is required? We will be running Progress.
>
>
> Best Regards,
>
> Dina M. Hieber
> Vamco International, Inc.
> 555 Epsilon Drive
> Pittsburgh, PA 15238
>
> (412) 963-7100 x 203
> (412) 963-9511
>
> www.vamcointernational.com<http://www.vamcointernational.com>
>
> *****
> This e-mail message and any files transmitted with it are confidential and are intended for the sole use of the intended receipient(s). Any unauthorized use or disclosure is prohibited. Any opinions express in the email are those of the individual and not necessarily the company. If you are not the intended recipient, please contact the send by reply email and destroy all copies of the original message.
>
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Greg Payne
> Sent: Friday, November 09, 2012 9:16 AM
> To: vantage@yahoogroups.com
> Subject: RE: [Vantage] Timesheet entry
>
>
>
> DMT has Job labor Adjustment under Production Adjustments. You should be able to do thru this. the fields available are.
>
> ClockInDate
>
> AssemblySeq
>
> OprSeq
>
> EmployeeNum
>
> LaborQty
>
> LaborType
>
> LaborHrs
>
> LaborCost
>
> BurdenHrs
>
> BurdenCost
>
> Complete
>
> OpComplete
>
> company
>
> LaborHedSeq
>
> LaborDtlSeq
>
> OpCode
>
> ResourceGrpID
>
> JcDept
>
> JobNum
>
> Plant
>
> I have version 1.0.4.5 for 905.700.
>
> Greg Payne
>
> From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf Of robelesde
> Sent: Friday, November 09, 2012 7:47 AM
> To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
> Subject: [Vantage] Timesheet entry
>
> Hello,
>
> I'm new to the group and have already learnt a lot - thanks for the tips!
>
> We are not yet using MES and are entering employee time from daily paper timesheets through time and expense entry.
>
> This is taking a long time and it would be much easier if we could cut and paste all the entries from a spreadsheet, however there doesn't seem to be a way to do this across multiple employees either in time and expense entry or using DMT.
>
> Does anyone have a way around this?
>
> Thanks in advance for your help. Our thoughts go out to all US members still cleaning up from Hurricane Sandy.
>
> Rob McMahon
> EL ES DE Engineering
> Perth, Western Australia
>
> ________________________________
> CONFIDENTIALITY NOTICE
>
> The information contained in this communication, including attachments, is privileged and confidential. It is intended only for the exclusive use of the addressee. If the reader of this message is not the intended recipient, or the employee or agent responsible for delivering it to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us at 727-578-6280 and immediately delete the communication.
>
> "This (document/presentation) may contain technical data as defined in the International Traffic In Arms Regulations (ITAR) 22 CFR 120.10. Export of this material is restricted by the Arms Export Control Act (22 U.S.C. 2751 et seq.) and may not be exported to foreign persons without prior approval form the U.S. Department of State."
>
> [Non-text portions of this message have been removed]
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>
>
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2013.0.2793 / Virus Database: 2624/5884 - Release Date: 11/09/12
>
[Non-text portions of this message have been removed]
----- Original Message -----
From: "Dina Hieber" <dhieber@...
<mailto:dhieber%40vamcointernational.com> >
To: <vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> >
Sent: Friday, November 09, 2012 10:58 AM
Subject: [Vantage] CRYSTAL REPORT VERSION??
> We finally are finishing up with the install for 9.05. Just realized, we
did not think about the crystsal report version. What version is required?
We will be running Progress.
>
>
> Best Regards,
>
> Dina M. Hieber
> Vamco International, Inc.
> 555 Epsilon Drive
> Pittsburgh, PA 15238
>
> (412) 963-7100 x 203
> (412) 963-9511
>
> www.vamcointernational.com<http://www.vamcointernational.com>
>
> *****
> This e-mail message and any files transmitted with it are confidential and
are intended for the sole use of the intended receipient(s). Any
unauthorized use or disclosure is prohibited. Any opinions express in the
email are those of the individual and not necessarily the company. If you
are not the intended recipient, please contact the send by reply email and
destroy all copies of the original message.
>
>
> From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf Of Greg Payne
> Sent: Friday, November 09, 2012 9:16 AM
> To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> Subject: RE: [Vantage] Timesheet entry
>
>
>
> DMT has Job labor Adjustment under Production Adjustments. You should be
able to do thru this. the fields available are.
>
> ClockInDate
>
> AssemblySeq
>
> OprSeq
>
> EmployeeNum
>
> LaborQty
>
> LaborType
>
> LaborHrs
>
> LaborCost
>
> BurdenHrs
>
> BurdenCost
>
> Complete
>
> OpComplete
>
> company
>
> LaborHedSeq
>
> LaborDtlSeq
>
> OpCode
>
> ResourceGrpID
>
> JcDept
>
> JobNum
>
> Plant
>
> I have version 1.0.4.5 for 905.700.
>
> Greg Payne
>
> From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>] On
Behalf Of robelesde
> Sent: Friday, November 09, 2012 7:47 AM
> To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
> Subject: [Vantage] Timesheet entry
>
> Hello,
>
> I'm new to the group and have already learnt a lot - thanks for the tips!
>
> We are not yet using MES and are entering employee time from daily paper
timesheets through time and expense entry.
>
> This is taking a long time and it would be much easier if we could cut and
paste all the entries from a spreadsheet, however there doesn't seem to be a
way to do this across multiple employees either in time and expense entry or
using DMT.
>
> Does anyone have a way around this?
>
> Thanks in advance for your help. Our thoughts go out to all US members
still cleaning up from Hurricane Sandy.
>
> Rob McMahon
> EL ES DE Engineering
> Perth, Western Australia
>
> ________________________________
> CONFIDENTIALITY NOTICE
>
> The information contained in this communication, including attachments, is
privileged and confidential. It is intended only for the exclusive use of
the addressee. If the reader of this message is not the intended recipient,
or the employee or agent responsible for delivering it to the intended
recipient, you are hereby notified that any dissemination, distribution or
copying of this communication is strictly prohibited. If you have received
this communication in error, please notify us at 727-578-6280 and
immediately delete the communication.
>
> "This (document/presentation) may contain technical data as defined in the
International Traffic In Arms Regulations (ITAR) 22 CFR 120.10. Export of
this material is restricted by the Arms Export Control Act (22 U.S.C. 2751
et seq.) and may not be exported to foreign persons without prior approval
form the U.S. Department of State."
>
> [Non-text portions of this message have been removed]
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
> (2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>
>
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2013.0.2793 / Virus Database: 2624/5884 - Release Date: 11/09/12
>
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
----- Original Message -----
From: "Steve_E" <vantage@...>
To: <vantage@yahoogroups.com>
Sent: Friday, November 09, 2012 2:19 PM
Subject: RE: [Vantage] CRYSTAL REPORT VERSION??
> Just an FYI that 64 bit 32 bit install version is based on the version of
> the mfgsys.exe you are running not the operating system.
>
>
>
> Steve
>
>
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
> Chris Robisch
> Sent: Friday, November 09, 2012 1:04 PM
> To: vantage@yahoogroups.com
> Subject: Re: [Vantage] CRYSTAL REPORT VERSION??
>
>
>
>
>
> Go to your version's Download section on Epicor's Support website and click
> on 3rd Party Products\Crystal.
> ----- Original Message -----
> From: "Dina Hieber" <dhieber@...
> <mailto:dhieber%40vamcointernational.com> >
> To: <vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> >
> Sent: Friday, November 09, 2012 10:58 AM
> Subject: [Vantage] CRYSTAL REPORT VERSION??
>
>> We finally are finishing up with the install for 9.05. Just realized, we
> did not think about the crystsal report version. What version is required?
> We will be running Progress.
>>
>>
>> Best Regards,
>>
>> Dina M. Hieber
>> Vamco International, Inc.
>> 555 Epsilon Drive
>> Pittsburgh, PA 15238
>>
>> (412) 963-7100 x 203
>> (412) 963-9511
>>
>> www.vamcointernational.com<http://www.vamcointernational.com>
>>
>> *****
>> This e-mail message and any files transmitted with it are confidential and
> are intended for the sole use of the intended receipient(s). Any
> unauthorized use or disclosure is prohibited. Any opinions express in the
> email are those of the individual and not necessarily the company. If you
> are not the intended recipient, please contact the send by reply email and
> destroy all copies of the original message.
>>
>>
>> From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> [mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
> Behalf Of Greg Payne
>> Sent: Friday, November 09, 2012 9:16 AM
>> To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
>> Subject: RE: [Vantage] Timesheet entry
>>
>>
>>
>> DMT has Job labor Adjustment under Production Adjustments. You should be
> able to do thru this. the fields available are.
>>
>> ClockInDate
>>
>> AssemblySeq
>>
>> OprSeq
>>
>> EmployeeNum
>>
>> LaborQty
>>
>> LaborType
>>
>> LaborHrs
>>
>> LaborCost
>>
>> BurdenHrs
>>
>> BurdenCost
>>
>> Complete
>>
>> OpComplete
>>
>> company
>>
>> LaborHedSeq
>>
>> LaborDtlSeq
>>
>> OpCode
>>
>> ResourceGrpID
>>
>> JcDept
>>
>> JobNum
>>
>> Plant
>>
>> I have version 1.0.4.5 for 905.700.
>>
>> Greg Payne
>>
>> From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com
> <mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>] On
> Behalf Of robelesde
>> Sent: Friday, November 09, 2012 7:47 AM
>> To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com>
>> Subject: [Vantage] Timesheet entry
>>
>> Hello,
>>
>> I'm new to the group and have already learnt a lot - thanks for the tips!
>>
>> We are not yet using MES and are entering employee time from daily paper
> timesheets through time and expense entry.
>>
>> This is taking a long time and it would be much easier if we could cut and
> paste all the entries from a spreadsheet, however there doesn't seem to be a
> way to do this across multiple employees either in time and expense entry or
> using DMT.
>>
>> Does anyone have a way around this?
>>
>> Thanks in advance for your help. Our thoughts go out to all US members
> still cleaning up from Hurricane Sandy.
>>
>> Rob McMahon
>> EL ES DE Engineering
>> Perth, Western Australia
>>
>> ________________________________
>> CONFIDENTIALITY NOTICE
>>
>> The information contained in this communication, including attachments, is
> privileged and confidential. It is intended only for the exclusive use of
> the addressee. If the reader of this message is not the intended recipient,
> or the employee or agent responsible for delivering it to the intended
> recipient, you are hereby notified that any dissemination, distribution or
> copying of this communication is strictly prohibited. If you have received
> this communication in error, please notify us at 727-578-6280 and
> immediately delete the communication.
>>
>> "This (document/presentation) may contain technical data as defined in the
> International Traffic In Arms Regulations (ITAR) 22 CFR 120.10. Export of
> this material is restricted by the Arms Export Control Act (22 U.S.C. 2751
> et seq.) and may not be exported to foreign persons without prior approval
> form the U.S. Department of State."
>>
>> [Non-text portions of this message have been removed]
>>
>>
>>
>> [Non-text portions of this message have been removed]
>>
>>
>>
>> ------------------------------------
>>
>> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
> already linked your email address to a yahoo id to enable access. )
>> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> <http://groups.yahoo.com/group/vantage/files/>
>> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
>> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>>
>>
>>
>>
>>
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2013.0.2793 / Virus Database: 2624/5884 - Release Date: 11/09/12
>>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>
>
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2013.0.2793 / Virus Database: 2624/5884 - Release Date: 11/09/12
>
[Non-text portions of this message have been removed]
--- In vantage@yahoogroups.com, "Steve_E" <vantage@...> wrote:
>
> Just an FYI that 64 bit 32 bit install version is based on the version of
> the mfgsys.exe you are running not the operating system.
>
>
>
> Steve
>
>
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
> Chris Robisch
> Sent: Friday, November 09, 2012 1:04 PM
> To: vantage@yahoogroups.com
> Subject: Re: [Vantage] CRYSTAL REPORT VERSION??
>
>
>
>
>
> Go to your version's Download section on Epicor's Support website and click
> on 3rd Party Products\Crystal.
> ----- Original Message -----
> From: "Dina Hieber" <dhieber@...
> <mailto:dhieber%40vamcointernational.com> >
> To: <vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> >
> Sent: Friday, November 09, 2012 10:58 AM
> Subject: [Vantage] CRYSTAL REPORT VERSION??
>
> > We finally are finishing up with the install for 9.05. Just realized, we
> did not think about the crystsal report version. What version is required?
> We will be running Progress.
> >
> >
> > Best Regards,
> >
> > Dina M. Hieber
> > Vamco International, Inc.
> > 555 Epsilon Drive
> > Pittsburgh, PA 15238
> >
> > (412) 963-7100 x 203
> > (412) 963-9511
> >
> > www.vamcointernational.com<http://www.vamcointernational.com>
> >
> > *****
> > This e-mail message and any files transmitted with it are confidential and
> are intended for the sole use of the intended receipient(s). Any
> unauthorized use or disclosure is prohibited. Any opinions express in the
> email are those of the individual and not necessarily the company. If you
> are not the intended recipient, please contact the send by reply email and
> destroy all copies of the original message.
> >
> >
> > From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> [mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
> Behalf Of Greg Payne
> > Sent: Friday, November 09, 2012 9:16 AM
> > To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> > Subject: RE: [Vantage] Timesheet entry
> >
> >
> >
> > DMT has Job labor Adjustment under Production Adjustments. You should be
> able to do thru this. the fields available are.
> >
> > ClockInDate
> >
> > AssemblySeq
> >
> > OprSeq
> >
> > EmployeeNum
> >
> > LaborQty
> >
> > LaborType
> >
> > LaborHrs
> >
> > LaborCost
> >
> > BurdenHrs
> >
> > BurdenCost
> >
> > Complete
> >
> > OpComplete
> >
> > company
> >
> > LaborHedSeq
> >
> > LaborDtlSeq
> >
> > OpCode
> >
> > ResourceGrpID
> >
> > JcDept
> >
> > JobNum
> >
> > Plant
> >
> > I have version 1.0.4.5 for 905.700.
> >
> > Greg Payne
> >
> > From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com
> <mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>] On
> Behalf Of robelesde
> > Sent: Friday, November 09, 2012 7:47 AM
> > To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com>
> > Subject: [Vantage] Timesheet entry
> >
> > Hello,
> >
> > I'm new to the group and have already learnt a lot - thanks for the tips!
> >
> > We are not yet using MES and are entering employee time from daily paper
> timesheets through time and expense entry.
> >
> > This is taking a long time and it would be much easier if we could cut and
> paste all the entries from a spreadsheet, however there doesn't seem to be a
> way to do this across multiple employees either in time and expense entry or
> using DMT.
> >
> > Does anyone have a way around this?
> >
> > Thanks in advance for your help. Our thoughts go out to all US members
> still cleaning up from Hurricane Sandy.
> >
> > Rob McMahon
> > EL ES DE Engineering
> > Perth, Western Australia
> >
> > ________________________________
> > CONFIDENTIALITY NOTICE
> >
> > The information contained in this communication, including attachments, is
> privileged and confidential. It is intended only for the exclusive use of
> the addressee. If the reader of this message is not the intended recipient,
> or the employee or agent responsible for delivering it to the intended
> recipient, you are hereby notified that any dissemination, distribution or
> copying of this communication is strictly prohibited. If you have received
> this communication in error, please notify us at 727-578-6280 and
> immediately delete the communication.
> >
> > "This (document/presentation) may contain technical data as defined in the
> International Traffic In Arms Regulations (ITAR) 22 CFR 120.10. Export of
> this material is restricted by the Arms Export Control Act (22 U.S.C. 2751
> et seq.) and may not be exported to foreign persons without prior approval
> form the U.S. Department of State."
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
> already linked your email address to a yahoo id to enable access. )
> > (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> <http://groups.yahoo.com/group/vantage/files/>
> > (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
> >
> >
> >
> >
> >
> > -----
> > No virus found in this message.
> > Checked by AVG - www.avg.com
> > Version: 2013.0.2793 / Virus Database: 2624/5884 - Release Date: 11/09/12
> >
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> [Non-text portions of this message have been removed]
>