Once you have the report open in crystal (8.5), you should be able to go
into File->Printer Setup and change page orientation to landscape.

Cheers

Abhi

_____

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Mosquito Shoes
Sent: Wednesday, 22 November 2006 11:52 PM
To: vantage@yahoogroups.com; cpeterson@...
Subject: Re: [Vantage] Crystal Reports Class

Dwight:

It was nice to hear that the Epicor Crystal class was good.

I am new to Crystal and need some help. I am trying to duplicate a wide
report that used to print on a pin feed printer (green bar) and I cannot
figure out how to expand a report so it 11 inches wide (landscape), I know
that I can print a report landscape but I need to expand the width in
Crystal.

Any ideas?

Thanks in advance.

Carl Peterson, CPIM
Nexus Software, Inc.
Plymouth, Michigan
cpeterson@nexussoft <mailto:cpeterson%40nexussoftware.net> ware.net

D Jones <mayorjones_2000@ <mailto:mayorjones_2000%40yahoo.com> yahoo.com>
wrote:
I took the training in Minneapolis - I found it very
helpful. They reviewed how to find the tables -
normally via the data dictionary. From there, they
explained linking and finding the correct link paths.

I use Crystal daily and took a lot of info from the
class. Note that there is also a Crystal users group
within Yahoo...

Hope this helps.

Dwight Jones
Iowa Rotocast Plastics, Inc.

--- manzi_paul <pmanzi@acceleroninc <mailto:pmanzi%40acceleroninc.com> .com>
wrote:

> Hello,
>
> I am looking for feedback on the Epicor Crystal
> Reports (8.0) classroom
> training? Specifically, is this a generic Crystal
> Reports class or
> does it also address Vantage related issues such as
> where the data
> resides in Vantage, how to add reports to Vantage,
> etc.?
>
> Any input would be greatly appreciated. Thanks,
>
> Paul
>
>
>
>

__________________________________________________________
Sponsored Link

Rates near 39yr lows. $510,000 Loan for $1698/mo.
Calcuate new payment. www.LowerMyBills.com/lre

---------------------------------
Sponsored Link

Degrees online in as fast as 1 Yr - MBA, Bachelor's, Master's, Associate -
Click now to apply

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

To anyone considering the Vantage sponsored Crystal Reports class:

I attended the two-day workshop in Irvine last week (1/18-19) and it was
terrific! It is taught by a person who worked for the Crystal Report
Development folks, and he has been doing this class for Epicor for some
time, so he understands the ins and outs of the Vantage database as well.
He clarified a lot of my confusion about Crystal Reports, showed us lots of
great stuff, and the class material was much more extensive than just a
power point presentation.

Highly recommended. Check the Epicor web site for schedules.

Lydia Coffman
Canyon Engineering Products, Inc.

It is a Vantage related class. Adding reports to Vantage is fairly easy
and that is a question that could be asked in the class and I'm sure
they would answer it. It is a fairly basic class, but very helpful if
you've never used Crystal before.

Paul

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of manzi_paul
Sent: Tuesday, November 21, 2006 2:15 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Crystal Reports Class

Hello,

I am looking for feedback on the Epicor Crystal Reports (8.0) classroom
training? Specifically, is this a generic Crystal Reports class or
does it also address Vantage related issues such as where the data
resides in Vantage, how to add reports to Vantage, etc.?

Any input would be greatly appreciated. Thanks,

Paul

[Non-text portions of this message have been removed]

I took the training in Minneapolis - I found it very
helpful. They reviewed how to find the tables -
normally via the data dictionary. From there, they
explained linking and finding the correct link paths.

I use Crystal daily and took a lot of info from the
class. Note that there is also a Crystal users group
within Yahoo...

Hope this helps.

Dwight Jones
Iowa Rotocast Plastics, Inc.

--- manzi_paul <pmanzi@...> wrote:

> Hello,
>
> I am looking for feedback on the Epicor Crystal
> Reports (8.0) classroom
> training? Specifically, is this a generic Crystal
> Reports class or
> does it also address Vantage related issues such as
> where the data
> resides in Vantage, how to add reports to Vantage,
> etc.?
>
> Any input would be greatly appreciated. Thanks,
>
> Paul
>
>
>
>

____________________________________________________________________________________
Sponsored Link

Rates near 39yr lows. $510,000 Loan for $1698/mo.
Calcuate new payment. www.LowerMyBills.com/lre

Dwight:

It was nice to hear that the Epicor Crystal class was good.

I am new to Crystal and need some help. I am trying to duplicate a wide report that used to print on a pin feed printer (green bar) and I cannot figure out how to expand a report so it 11 inches wide (landscape), I know that I can print a report landscape but I need to expand the width in Crystal.

Any ideas?

Thanks in advance.

Carl Peterson, CPIM
Nexus Software, Inc.
Plymouth, Michigan
cpeterson@...

D Jones <mayorjones_2000@...> wrote:
I took the training in Minneapolis - I found it very
helpful. They reviewed how to find the tables -
normally via the data dictionary. From there, they
explained linking and finding the correct link paths.

I use Crystal daily and took a lot of info from the
class. Note that there is also a Crystal users group
within Yahoo...

Hope this helps.

Dwight Jones
Iowa Rotocast Plastics, Inc.

--- manzi_paul <pmanzi@...> wrote:

> Hello,
>
> I am looking for feedback on the Epicor Crystal
> Reports (8.0) classroom
> training? Specifically, is this a generic Crystal
> Reports class or
> does it also address Vantage related issues such as
> where the data
> resides in Vantage, how to add reports to Vantage,
> etc.?
>
> Any input would be greatly appreciated. Thanks,
>
> Paul
>
>
>
>

__________________________________________________________
Sponsored Link

Rates near 39yr lows. $510,000 Loan for $1698/mo.
Calcuate new payment. www.LowerMyBills.com/lre

---------------------------------
Sponsored Link

Degrees online in as fast as 1 Yr - MBA, Bachelor's, Master's, Associate - Click now to apply

[Non-text portions of this message have been removed]

Thanks, I appreciate your input.

Paul Manzi
Acceleron, Inc.

--- In vantage@yahoogroups.com, D Jones <mayorjones_2000@...> wrote:
>
> I took the training in Minneapolis - I found it very
> helpful. They reviewed how to find the tables -
> normally via the data dictionary. From there, they
> explained linking and finding the correct link paths.
>
> I use Crystal daily and took a lot of info from the
> class. Note that there is also a Crystal users group
> within Yahoo...
>
> Hope this helps.
>
> Dwight Jones
> Iowa Rotocast Plastics, Inc.
>
>
>
> --- manzi_paul <pmanzi@...> wrote:
>
> > Hello,
> >
> > I am looking for feedback on the Epicor Crystal
> > Reports (8.0) classroom
> > training? Specifically, is this a generic Crystal
> > Reports class or
> > does it also address Vantage related issues such as
> > where the data
> > resides in Vantage, how to add reports to Vantage,
> > etc.?
> >
> > Any input would be greatly appreciated. Thanks,
> >
> > Paul
> >
> >
> >
> >
>
>
>
>
>
______________________________________________________________________
______________
> Sponsored Link
>
> Rates near 39yr lows. $510,000 Loan for $1698/mo.
> Calcuate new payment. www.LowerMyBills.com/lre
>

Thanks for your input, Paul.

Paul Manzi
Acceleron

--- In vantage@yahoogroups.com, "Paul V. Blais" <pblais@...> wrote:
>
> It is a Vantage related class. Adding reports to Vantage is fairly
easy
> and that is a question that could be asked in the class and I'm sure
> they would answer it. It is a fairly basic class, but very helpful
if
> you've never used Crystal before.
>
>
>
> Paul
>
>
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
Behalf
> Of manzi_paul
> Sent: Tuesday, November 21, 2006 2:15 PM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Crystal Reports Class
>
>
>
> Hello,
>
> I am looking for feedback on the Epicor Crystal Reports (8.0)
classroom
> training? Specifically, is this a generic Crystal Reports class or
> does it also address Vantage related issues such as where the data
> resides in Vantage, how to add reports to Vantage, etc.?
>
> Any input would be greatly appreciated. Thanks,
>
> Paul
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

Thanks, I appreciate your input.

Paul Manzi

Acceleron, Inc.

________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of D Jones
Sent: Tuesday, November 21, 2006 2:25 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Crystal Reports Class

I took the training in Minneapolis - I found it very
helpful. They reviewed how to find the tables -
normally via the data dictionary. From there, they
explained linking and finding the correct link paths.

I use Crystal daily and took a lot of info from the
class. Note that there is also a Crystal users group
within Yahoo...

Hope this helps.

Dwight Jones
Iowa Rotocast Plastics, Inc.

--- manzi_paul <pmanzi@...
<mailto:pmanzi%40acceleroninc.com> > wrote:

> Hello,
>
> I am looking for feedback on the Epicor Crystal
> Reports (8.0) classroom
> training? Specifically, is this a generic Crystal
> Reports class or
> does it also address Vantage related issues such as
> where the data
> resides in Vantage, how to add reports to Vantage,
> etc.?
>
> Any input would be greatly appreciated. Thanks,
>
> Paul
>
>
>
>

Carl,
You need to go into File and then Page Setup. There you can change
the report to landscape.

Mark Wildasin
Version 8.00.809F

--- In vantage@yahoogroups.com, Mosquito Shoes <mosq_shoes@...>
wrote:

>
> Dwight:
>
> It was nice to hear that the Epicor Crystal class was good.
>
> I am new to Crystal and need some help. I am trying to

duplicate a wide report that used to print on a pin feed printer
(green bar) and I cannot figure out how to expand a report so it 11
inches wide (landscape), I know that I can print a report landscape
but I need to expand the width in Crystal.

>
> Any ideas?
>
> Thanks in advance.
>
> Carl Peterson, CPIM
> Nexus Software, Inc.
> Plymouth, Michigan
> cpeterson@...
>
> D Jones <mayorjones_2000@...> wrote:
> I took the training in Minneapolis - I found it very
> helpful. They reviewed how to find the tables -
> normally via the data dictionary. From there, they
> explained linking and finding the correct link paths.
>
> I use Crystal daily and took a lot of info from the
> class. Note that there is also a Crystal users group
> within Yahoo...
>
> Hope this helps.
>
> Dwight Jones
> Iowa Rotocast Plastics, Inc.
>
> --- manzi_paul <pmanzi@...> wrote:
>
> > Hello,
> >
> > I am looking for feedback on the Epicor Crystal
> > Reports (8.0) classroom
> > training? Specifically, is this a generic Crystal
> > Reports class or
> > does it also address Vantage related issues such as
> > where the data
> > resides in Vantage, how to add reports to Vantage,
> > etc.?
> >
> > Any input would be greatly appreciated. Thanks,
> >
> > Paul
> >
> >
> >
> >
>
> __________________________________________________________
> Sponsored Link
>
> Rates near 39yr lows. $510,000 Loan for $1698/mo.
> Calcuate new payment. www.LowerMyBills.com/lre
>
>
>
>
>
> ---------------------------------
> Sponsored Link
>
> Degrees online in as fast as 1 Yr - MBA, Bachelor's, Master's,

Associate - Click now to apply

>
> [Non-text portions of this message have been removed]
>