Crystal & Zebra

system · May 15, 2013, 6:46pm

Have you looked at Epicweb for the Crystal 2008 rutnime?
I think SP3 is the latest "Crystal Reports 2008 Runtime SP3"

Here is an Epicweb link to SP3:

https://epicweb.epicor.com/Support/epicor9/downloads/Crystal%20905600/Crystal%20Reports%202008%20Runtime%20SP3.zip.aspx

Also, if you haven't done this already... I found that I needed to fully patch my Crystal 2008 Developer, to SP4. There were quite a few issues without this.
I don't think these are on Epicweb, I had to go to SAP & set up an account first.
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm

--- In vantage@yahoogroups.com, "rmackieusa" <rmackie@...> wrote:
>
>
>
> Thanks, I did, but we are using Crystal Reports 2008 not XI.
>
> --- In vantage@yahoogroups.com, "Cathy" <cathy@> wrote:
> >
> > Try this link.
> >
> >
> >
> > - XI = Crystal Reports XI R2 .Net 3.0 Runtime SP6
> >
> > (https://epicweb.epicor.com/Support/epicor9/downloads/Crystal%20904500/Cryst
> > al%20Reports%20XI%20R2%20.Net%203.0%20Runtime%20SP6.zip.aspx)
> >
> >
> >
> >
> >
> > From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
> > rmackieusa
> > Sent: Monday, May 13, 2013 2:05 PM
> > To: vantage@yahoogroups.com
> > Subject: [Vantage] Re: Crystal & Zebra
> >
> >
> >
> >
> >
> > Thanks. I installed SP4, but I could only find Runtime SP3 on Epicor
> >
> > --- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> , "Cathy"
> > <cathy@> wrote:
> > >
> > > I went to the SAP website.
> > >
> > >
> > >
> > > http://scn.sap.com/docs/DOC-27917
> > >
> > >
> > >
> > > I also updated the Crystal Runtime which I downloaded from Epicor.
> > >
> > >
> > >
> > > From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> > [mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
> > Behalf Of
> > > rmackieusa
> > > Sent: Monday, May 13, 2013 9:17 AM
> > > To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> > > Subject: [Vantage] Re: Crystal & Zebra
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Cathy,
> > >
> > > Where do I get Crystal SP4 from? (I'm using 2008)
> > >
> > > Richard
> > >
> > > --- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> > <mailto:vantage%40yahoogroups.com> , "Cathy"
> > > <cathy@> wrote:
> > > >
> > > > Ken,
> > > >
> > > >
> > > >
> > > > I posted this mid April - read below. We are using Crystal reports 2008.
> > > >
> > > >
> > > >
> > > > FYI
> > > >
> > > > All, I did received help from a group member who recommended that I
> > > applied
> > > > the Crystal patches up to SP4.
> > > >
> > > > After applying SP4 to Crystal, my label is now printing with the correct
> > > > orientation.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> > <mailto:vantage%40yahoogroups.com>
> > > [mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> > <mailto:vantage%40yahoogroups.com> ] On
> > > Behalf Of
> > > > Ken Williams
> > > > Sent: Friday, May 03, 2013 9:23 AM
> > > > Subject: [Vantage] Crystal & Zebra
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > I've got a Crystal report that we've made to print labels when returning
> > > > material to stock. For some reason it's printing rotated, as if I have
> > > > landscape or portrait backwards. Despite way too much time playing with
> > > it,
> > > > I cannot get the damn thing to rotate 90 degrees.
> > > >
> > > > Things tried:
> > > >
> > > > * Toggle Portrait/Landscape
> > > >
> > > > * Change print size
> > > >
> > > > * Create new report flipped 90 degrees
> > > >
> > > > Any additional suggestions on what to look for?
> > > >
> > > > Ken
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > >
> > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>

system · May 3, 2013, 12:24pm

I've got a Crystal report that we've made to print labels when returning material to stock. For some reason it's printing rotated, as if I have landscape or portrait backwards. Despite way too much time playing with it, I cannot get the damn thing to rotate 90 degrees.

Things tried:

* Toggle Portrait/Landscape

* Change print size

* Create new report flipped 90 degrees

Any additional suggestions on what to look for?

Ken

[Non-text portions of this message have been removed]

system · May 3, 2013, 12:31pm

Ken,

I posted this mid April - read below. We are using Crystal reports 2008.

FYI

All, I did received help from a group member who recommended that I applied
the Crystal patches up to SP4.

After applying SP4 to Crystal, my label is now printing with the correct
orientation.

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Ken Williams
Sent: Friday, May 03, 2013 9:23 AM
Subject: [Vantage] Crystal & Zebra

I've got a Crystal report that we've made to print labels when returning
material to stock. For some reason it's printing rotated, as if I have
landscape or portrait backwards. Despite way too much time playing with it,
I cannot get the damn thing to rotate 90 degrees.

Things tried:

* Toggle Portrait/Landscape

* Change print size

* Create new report flipped 90 degrees

Any additional suggestions on what to look for?

Ken

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

system · May 3, 2013, 12:44pm

Hi!

In the Zebra Printing Options, you must put the good papers size with the
landscape or not.

*Amï¿½lie Pelletier*

*Analyste Programmeur / Program analyst*

* *

[image: cid:image001.jpg@01CD5525.2091A820]

* *

*230, Boulevard Nilus-Leclerc*

*L'Islet, Quï¿½bec (Canada)*

*G0R 2C0*

*Tï¿½lï¿½phone: 418-247-3986 ext. 2390*

*Fax: 418-247-7925*

*amelie.pelletier@... <brigitte.savoie@...>*

*P** *Est-ce nï¿½cessaire dï¿½imprimer ce message?
*Please consider the environment before printing this email**.*

*De :* vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] *De la part
de* Ken Williams
*Envoyï¿½ :* 3 mai 2013 12:23
*Objet :* [Vantage] Crystal & Zebra

I've got a Crystal report that we've made to print labels when returning
material to stock. For some reason it's printing rotated, as if I have
landscape or portrait backwards. Despite way too much time playing with it,
I cannot get the damn thing to rotate 90 degrees.

Things tried:

* Toggle Portrait/Landscape

* Change print size

* Create new report flipped 90 degrees

Any additional suggestions on what to look for?

Ken

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

system · May 13, 2013, 12:16pm

Cathy,

Where do I get Crystal SP4 from? (I'm using 2008)

Richard

--- In vantage@yahoogroups.com, "Cathy" <cathy@...> wrote:
>
> Ken,
>
>
>
> I posted this mid April - read below. We are using Crystal reports 2008.
>
>
>
> FYI
>
> All, I did received help from a group member who recommended that I applied
> the Crystal patches up to SP4.
>
> After applying SP4 to Crystal, my label is now printing with the correct
> orientation.
>
>
>
>
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
> Ken Williams
> Sent: Friday, May 03, 2013 9:23 AM
> Subject: [Vantage] Crystal & Zebra
>
>
>
>
>
> I've got a Crystal report that we've made to print labels when returning
> material to stock. For some reason it's printing rotated, as if I have
> landscape or portrait backwards. Despite way too much time playing with it,
> I cannot get the damn thing to rotate 90 degrees.
>
> Things tried:
>
> * Toggle Portrait/Landscape
>
> * Change print size
>
> * Create new report flipped 90 degrees
>
> Any additional suggestions on what to look for?
>
> Ken
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

system · May 13, 2013, 12:34pm

I went to the SAP website.

http://scn.sap.com/docs/DOC-27917

I also updated the Crystal Runtime which I downloaded from Epicor.

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
rmackieusa
Sent: Monday, May 13, 2013 9:17 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: Crystal & Zebra

Cathy,

Where do I get Crystal SP4 from? (I'm using 2008)

Richard

--- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> , "Cathy"
<cathy@...> wrote:

>
> Ken,
>
>
>
> I posted this mid April - read below. We are using Crystal reports 2008.
>
>
>
> FYI
>
> All, I did received help from a group member who recommended that I

applied

> the Crystal patches up to SP4.
>
> After applying SP4 to Crystal, my label is now printing with the correct
> orientation.
>
>
>
>
>
> From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>

[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf Of

> Ken Williams
> Sent: Friday, May 03, 2013 9:23 AM
> Subject: [Vantage] Crystal & Zebra
>
>
>
>
>
> I've got a Crystal report that we've made to print labels when returning
> material to stock. For some reason it's printing rotated, as if I have
> landscape or portrait backwards. Despite way too much time playing with

it,

> I cannot get the damn thing to rotate 90 degrees.
>
> Things tried:
>
> * Toggle Portrait/Landscape
>
> * Change print size
>
> * Create new report flipped 90 degrees
>
> Any additional suggestions on what to look for?
>
> Ken
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

[Non-text portions of this message have been removed]

system · May 13, 2013, 5:04pm

Thanks. I installed SP4, but I could only find Runtime SP3 on Epicor

--- In vantage@yahoogroups.com, "Cathy" <cathy@...> wrote:
>
> I went to the SAP website.
>
>
>
> http://scn.sap.com/docs/DOC-27917
>
>
>
> I also updated the Crystal Runtime which I downloaded from Epicor.
>
>
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
> rmackieusa
> Sent: Monday, May 13, 2013 9:17 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Re: Crystal & Zebra
>
>
>
>
>
>
>
> Cathy,
>
> Where do I get Crystal SP4 from? (I'm using 2008)
>
> Richard
>
> --- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> , "Cathy"
> <cathy@> wrote:
> >
> > Ken,
> >
> >
> >
> > I posted this mid April - read below. We are using Crystal reports 2008.
> >
> >
> >
> > FYI
> >
> > All, I did received help from a group member who recommended that I
> applied
> > the Crystal patches up to SP4.
> >
> > After applying SP4 to Crystal, my label is now printing with the correct
> > orientation.
> >
> >
> >
> >
> >
> > From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> [mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
> Behalf Of
> > Ken Williams
> > Sent: Friday, May 03, 2013 9:23 AM
> > Subject: [Vantage] Crystal & Zebra
> >
> >
> >
> >
> >
> > I've got a Crystal report that we've made to print labels when returning
> > material to stock. For some reason it's printing rotated, as if I have
> > landscape or portrait backwards. Despite way too much time playing with
> it,
> > I cannot get the damn thing to rotate 90 degrees.
> >
> > Things tried:
> >
> > * Toggle Portrait/Landscape
> >
> > * Change print size
> >
> > * Create new report flipped 90 degrees
> >
> > Any additional suggestions on what to look for?
> >
> > Ken
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

system · May 14, 2013, 8:56am

Try this link.

- XI = Crystal Reports XI R2 .Net 3.0 Runtime SP6

(https://epicweb.epicor.com/Support/epicor9/downloads/Crystal%20904500/Cryst
al%20Reports%20XI%20R2%20.Net%203.0%20Runtime%20SP6.zip.aspx)

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
rmackieusa
Sent: Monday, May 13, 2013 2:05 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: Crystal & Zebra

Thanks. I installed SP4, but I could only find Runtime SP3 on Epicor

--- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> , "Cathy"
<cathy@...> wrote:

>
> I went to the SAP website.
>
>
>
> http://scn.sap.com/docs/DOC-27917
>
>
>
> I also updated the Crystal Runtime which I downloaded from Epicor.
>
>
>
> From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>

[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf Of

> rmackieusa
> Sent: Monday, May 13, 2013 9:17 AM
> To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> Subject: [Vantage] Re: Crystal & Zebra
>
>
>
>
>
>
>
> Cathy,
>
> Where do I get Crystal SP4 from? (I'm using 2008)
>
> Richard
>
> --- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>

<mailto:vantage%40yahoogroups.com> , "Cathy"

> <cathy@> wrote:
> >
> > Ken,
> >
> >
> >
> > I posted this mid April - read below. We are using Crystal reports 2008.
> >
> >
> >
> > FYI
> >
> > All, I did received help from a group member who recommended that I
> applied
> > the Crystal patches up to SP4.
> >
> > After applying SP4 to Crystal, my label is now printing with the correct
> > orientation.
> >
> >
> >
> >
> >
> > From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>

<mailto:vantage%40yahoogroups.com>

> [mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>

<mailto:vantage%40yahoogroups.com> ] On

> Behalf Of
> > Ken Williams
> > Sent: Friday, May 03, 2013 9:23 AM
> > Subject: [Vantage] Crystal & Zebra
> >
> >
> >
> >
> >
> > I've got a Crystal report that we've made to print labels when returning
> > material to stock. For some reason it's printing rotated, as if I have
> > landscape or portrait backwards. Despite way too much time playing with
> it,
> > I cannot get the damn thing to rotate 90 degrees.
> >
> > Things tried:
> >
> > * Toggle Portrait/Landscape
> >
> > * Change print size
> >
> > * Create new report flipped 90 degrees
> >
> > Any additional suggestions on what to look for?
> >
> > Ken
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

[Non-text portions of this message have been removed]

system · May 15, 2013, 5:31pm

Thanks, I did, but we are using Crystal Reports 2008 not XI.

--- In vantage@yahoogroups.com, "Cathy" <cathy@...> wrote:
>
> Try this link.
>
>
>
> - XI = Crystal Reports XI R2 .Net 3.0 Runtime SP6
>
> (https://epicweb.epicor.com/Support/epicor9/downloads/Crystal%20904500/Cryst
> al%20Reports%20XI%20R2%20.Net%203.0%20Runtime%20SP6.zip.aspx)
>
>
>
>
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
> rmackieusa
> Sent: Monday, May 13, 2013 2:05 PM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Re: Crystal & Zebra
>
>
>
>
>
> Thanks. I installed SP4, but I could only find Runtime SP3 on Epicor
>
> --- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> , "Cathy"
> <cathy@> wrote:
> >
> > I went to the SAP website.
> >
> >
> >
> > http://scn.sap.com/docs/DOC-27917
> >
> >
> >
> > I also updated the Crystal Runtime which I downloaded from Epicor.
> >
> >
> >
> > From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> [mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
> Behalf Of
> > rmackieusa
> > Sent: Monday, May 13, 2013 9:17 AM
> > To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> > Subject: [Vantage] Re: Crystal & Zebra
> >
> >
> >
> >
> >
> >
> >
> > Cathy,
> >
> > Where do I get Crystal SP4 from? (I'm using 2008)
> >
> > Richard
> >
> > --- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com> , "Cathy"
> > <cathy@> wrote:
> > >
> > > Ken,
> > >
> > >
> > >
> > > I posted this mid April - read below. We are using Crystal reports 2008.
> > >
> > >
> > >
> > > FYI
> > >
> > > All, I did received help from a group member who recommended that I
> > applied
> > > the Crystal patches up to SP4.
> > >
> > > After applying SP4 to Crystal, my label is now printing with the correct
> > > orientation.
> > >
> > >
> > >
> > >
> > >
> > > From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com>
> > [mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> <mailto:vantage%40yahoogroups.com> ] On
> > Behalf Of
> > > Ken Williams
> > > Sent: Friday, May 03, 2013 9:23 AM
> > > Subject: [Vantage] Crystal & Zebra
> > >
> > >
> > >
> > >
> > >
> > > I've got a Crystal report that we've made to print labels when returning
> > > material to stock. For some reason it's printing rotated, as if I have
> > > landscape or portrait backwards. Despite way too much time playing with
> > it,
> > > I cannot get the damn thing to rotate 90 degrees.
> > >
> > > Things tried:
> > >
> > > * Toggle Portrait/Landscape
> > >
> > > * Change print size
> > >
> > > * Create new report flipped 90 degrees
> > >
> > > Any additional suggestions on what to look for?
> > >
> > > Ken
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
> [Non-text portions of this message have been removed]
>