# Data Collection
**Category:** [Yahoo Archive](https://www.epiusers.help/c/yahoo-archive/9)
**Created:** 2000-12-11 09:26 UTC
**Views:** 1668
**Replies:** 60
**URL:** https://www.epiusers.help/t/data-collection/1723
---
## Post #1 by @system
The use of Wyse Winterms (or similar) is the best opition IMO.
No moving parts = very low failure rate. Which is important
if you have a lot of stations.
Jim Horton wrote:
>
> I am just wondering if there are many Vantage users out there who are using
> the Data Collection module. We are going to start soon and I'm looking for
> info on the best way to go? When I called "Vantage Sales" I was told "We
> sell the software not the hardware" and we can use whatever hardware we
> want. Question is, what's our choices? And where can we get it?
>
>
> We no longer allow attachments to files. To access/share Report Files, please go to the following link: http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time you try it, go to www.egroups.com, login and be sure to save your password, choose My Groups, choose Vantage, then choose Files. If you save the password, the link above will work the next time you try it.)
Joe,
Can you give me some idea of the cost of the Wyse terminals and where you
buy them? Their web site isn't very forthcoming with info.
TIA.
================
Steve Sanders
Delta Centrifugal Corp.
-----Original Message-----
From: Joe Konecny [mailto:
jkonecn@...]
Sent: Monday, December 11, 2000 8:26 AM
To:
vantage@egroups.com
Subject: Re: [Vantage] Data Collection
The use of Wyse Winterms (or similar) is the best opition IMO.
No moving parts = very low failure rate. Which is important
if you have a lot of stations.
Jim Horton wrote:
>
> I am just wondering if there are many Vantage users out there who are
using
> the Data Collection module. We are going to start soon and I'm looking
for
> info on the best way to go? When I called "Vantage Sales" I was told
"We
> sell the software not the hardware" and we can use whatever hardware we
> want. Question is, what's our choices? And where can we get it?
>
>
> We no longer allow attachments to files. To access/share Report Files,
please go to the following link:
http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time you try it, go
to www.egroups.com, login and be sure to save your password, choose My
Groups, choose Vantage, then choose Files. If you save the password, the
link above will work the next time you try it.)
eGroups Sponsor
We no longer allow attachments to files. To access/share Report Files,
please go to the following link:
http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go
to www.egroups.com, login and be sure to save your password, choose My
Groups, choose Vantage, then choose Files. If you save the password, the
link above will work the next time you try it.)
[Non-text portions of this message have been removed]
They are around $600-$700 each. I got a distributor name from
Wyse. Call them or look on their web site. I used to use
old pc's but they are way too much trouble. Winterms require
no configuration, no drivers, no software to load. Just turn
them on. In the event that one did die you just plug a new one in.
Steve Sanders wrote:
>
> Joe,
> Can you give me some idea of the cost of the Wyse terminals and where you
> buy them? Their web site isn't very forthcoming with info.
> TIA.
> ================
> Steve Sanders
> Delta Centrifugal Corp.
> -----Original Message-----
> From: Joe Konecny [mailto:jkonecn@...]
> Sent: Monday, December 11, 2000 8:26 AM
> To: vantage@egroups.com
> Subject: Re: [Vantage] Data Collection
>
> The use of Wyse Winterms (or similar) is the best opition IMO.
> No moving parts = very low failure rate. Which is important
> if you have a lot of stations.
>
> Jim Horton wrote:
> >
> > I am just wondering if there are many Vantage users out there who are
> using
> > the Data Collection module. We are going to start soon and I'm looking
> for
> > info on the best way to go? When I called "Vantage Sales" I was told
> "We
> > sell the software not the hardware" and we can use whatever hardware we
> > want. Question is, what's our choices? And where can we get it?
> >
> >
> > We no longer allow attachments to files. To access/share Report Files,
> please go to the following link: http://www.egroups.com/files/vantage/
> > (Note: If this link does not work for you the first time you try it, go
> to www.egroups.com, login and be sure to save your password, choose My
> Groups, choose Vantage, then choose Files. If you save the password, the
> link above will work the next time you try it.)
>
> eGroups Sponsor
>
> We no longer allow attachments to files. To access/share Report Files,
> please go to the following link: http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time you try it, go
> to www.egroups.com, login and be sure to save your password, choose My
> Groups, choose Vantage, then choose Files. If you save the password, the
> link above will work the next time you try it.)
>
> [Non-text portions of this message have been removed]
>
>
> We no longer allow attachments to files. To access/share Report Files, please go to the following link: http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time you try it, go to www.egroups.com, login and be sure to save your password, choose My Groups, choose Vantage, then choose Files. If you save the password, the link above will work the next time you try it.)
We have just moved to Vantage version 4 and are still putting out fires, they have calmed quite a bit, but now I have a new problem. Yesterday I had two employees go to end activity and clock out and received a message " record already in use" I checked and nobody had their ID pulled on on any other DC screen, but sill I have the error. I checked ERANET and it just says if you cant find the workstation with the person pulled up in data collection you have to shutdown the database and start it back up. Have any of you seen this problem? And is there an easy solution?
Thanks
Paul Lipham
ASPI
---
## Post #5 by @system
---
## Post #6 by @system
Paul,
We have seen this problem from time to time, and we have found that if the
user goes back to the workstation on which they started the activity, it
usually lets them end it. Not very scientific, but we have found it to work
most of the time. When it doesn't, we shutdown and restart that night, and
let the supervisor adjust the user's times the next day. We always shut the
server down, instead of just the database. It makes NT happy.
B
-----Original Message-----
From: Paul Lipham [mailto:
paull@...]
Sent: Thursday, February 15, 2001 8:43 AM
To: '
vantage@yahoogroups.com'
Subject: [Vantage] Data Collection
We have just moved to Vantage version 4 and are still putting out fires,
they have calmed quite a bit, but now I have a new problem. Yesterday I had
two employees go to end activity and clock out and received a message "
record already in use" I checked and nobody had their ID pulled on on any
other DC screen, but sill I have the error. I checked ERANET and it just
says if you cant find the workstation with the person pulled up in data
collection you have to shutdown the database and start it back up. Have any
of you seen this problem? And is there an easy solution?
Thanks
Paul Lipham
ASPI
To unsubscribe from this group, send an email to:
vantage-unsubscribe@egroups.comWe have this happen almost daily at our other plant that connects over
terminal server. I just go into PROMON and disconnect that station (or
sometimes both) instead of having to shutdown the database. (Each of our
data collection stations has a separate login so we can easily identify it
in PROMON.)
Sue Howard
Information Specialist
Image National, Inc.
(208) 287-1904
sueh@...
-----Original Message-----
From: Paul Lipham [mailto:
paull@...]
Sent: Thursday, February 15, 2001 8:43 AM
To: '
vantage@yahoogroups.com'
Subject: [Vantage] Data Collection
We have just moved to Vantage version 4 and are still
putting out fires, they have calmed quite a bit, but now I have a new
problem. Yesterday I had two employees go to end activity and clock out and
received a message " record already in use" I checked and nobody had their
ID pulled on on any other DC screen, but sill I have the error. I checked
ERANET and it just says if you cant find the workstation with the person
pulled up in data collection you have to shutdown the database and start it
back up. Have any of you seen this problem? And is there an easy solution?
Thanks
Paul Lipham
ASPI
------------------------ Yahoo! Groups Sponsor
To unsubscribe from this group, send an email to:
vantage-unsubscribe@egroups.com
[Non-text portions of this message have been removed]
I have encounter this often. If a workstation crashes, then this can
happen. I find out which workstation the person was using. Then use
Promon to disconnect that workstation.
--- In vantage@y..., Paul Lipham <paull@a...> wrote:
> We have just moved to Vantage version 4 and are still putting out
fires, they have calmed quite a bit, but now I have a new problem.
Yesterday I had two employees go to end activity and clock out and
received a message " record already in use" I checked and nobody had
their ID pulled on on any other DC screen, but sill I have the
error. I checked ERANET and it just says if you cant find the
workstation with the person pulled up in data collection you have to
shutdown the database and start it back up. Have any of you seen
this problem? And is there an easy solution?
>
> Thanks
> Paul Lipham
> ASPI
Also, concerning Terminal Server, Sometimes you have to reset the client
from TS because the client comes back into a locked session. If you clear
both, you will take care of the problem completely until the next time they
crash or get bumped out of Vantage.
Roy Bosworth
Senior Manager IT/MIS
818-503-8100
-----Original Message-----
From: Sue Howard [mailto:
sueh@...]
Sent: Thursday, February 15, 2001 8:26 AM
To: '
vantage@yahoogroups.com'
Subject: RE: [Vantage] Data Collection
We have this happen almost daily at our other plant that connects over
terminal server. I just go into PROMON and disconnect that station (or
sometimes both) instead of having to shutdown the database. (Each of our
data collection stations has a separate login so we can easily identify it
in PROMON.)
Sue Howard
Information Specialist
Image National, Inc.
(208) 287-1904
sueh@...
-----Original Message-----
From: Paul Lipham [mailto:
paull@...]
Sent: Thursday, February 15, 2001 8:43 AM
To: '
vantage@yahoogroups.com'
Subject: [Vantage] Data Collection
We have just moved to Vantage version 4 and are still
putting out fires, they have calmed quite a bit, but now I have a new
problem. Yesterday I had two employees go to end activity and clock out and
received a message " record already in use" I checked and nobody had their
ID pulled on on any other DC screen, but sill I have the error. I checked
ERANET and it just says if you cant find the workstation with the person
pulled up in data collection you have to shutdown the database and start it
back up. Have any of you seen this problem? And is there an easy solution?
Thanks
Paul Lipham
ASPI
------------------------ Yahoo! Groups Sponsor
To unsubscribe from this group, send an email to:
vantage-unsubscribe@egroups.com
[Non-text portions of this message have been removed]
To unsubscribe from this group, send an email to:
vantage-unsubscribe@egroups.comOption 1. If you have the source code you could change this.
Option 2. Use a windows macro product such as Ground Control. When you want
to open this window execute the macro instead to open the window and change
whatever default settings you like.
In version 5.0 you can change the SORT BY default but not the JOB STATUS. I
would hope they add this along with others in the future. Like PO Browse to
default to the User in the BUYER select? Both would be a good suggestion for
version 6.0
Patrick Winter
sSc Specialty Screw Corporation
Vantage 5.00.317, Progress 9.1a
-----Original Message-----
From:
KRGENT@... [mailto:
KRGENT@...]
Sent: Tuesday, November 13, 2001 4:41 AM
To:
vantage@yahoogroups.com
Subject: [Vantage] Data Collection
Goodmorning Vantage Users,
Just curious if anyone has solutions to somehow change the default job
status
filter for clocking into production. It currently defaults to "open'" and
shows a listing off all jobs to possible have labor clock into when I would
like it to default to "released." From what Epicor says this can not be
changed, I just had to see if any users are as frustrated as I am and
possible have alternatives to this ?
Thank You,
Gary Waldman
KRG Enterprises
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/Thank you to those who responded to my third database question. I have
another for the group....data collection. We are currently using time cards
and labor entry, but are looking into changing to shop floor data
collection. What I would like to know from you who are using it is:
What equipment do you use and have you tried
What issues came up with implementation
Any helpful hints or things to watch for
If there is someone in the group that would not mind, I would be glad to
speak one on one about this issue. TIA (again)
Diane Rowberry
Westwood Precision, Inc.
(425) 742-7011 ex 43
(425) 353-8945 Fax
diane.rowberry@...
www.westwoodprecision.com
We have been using data collection for about two years. Use touchscreens with old 200mhz PC's as timeclocks. We had custom programming to modify the screen to be similar to what we had used before (KRONOS system) and to change the order of questions to make them more simple. The biggest source of error for timekeeping is have a screen that confuses computer iliterate users.
Incidently, as we move to cell manufacturing, we are doing away with the timeclocks and going to paper, so in the very near future we won't be using data collection nearly as much. Vantage 5.1 significantly changes the timekeeping screens, by the way. We are still on 5.0.
Troy Funte
Liberty Electronics
----- Original Message -----
From: Diane Rowberry
To: vantage@yahoogroups.com
Sent: Thursday, December 06, 2001 12:59 PM
Subject: [Vantage] Data Collection
Thank you to those who responded to my third database question. I have
another for the group....data collection. We are currently using time cards
and labor entry, but are looking into changing to shop floor data
collection. What I would like to know from you who are using it is:
What equipment do you use and have you tried
What issues came up with implementation
Any helpful hints or things to watch for
If there is someone in the group that would not mind, I would be glad to
speak one on one about this issue. TIA (again)
Diane Rowberry
Westwood Precision, Inc.
(425) 742-7011 ex 43
(425) 353-8945 Fax
diane.rowberry@...
www.westwoodprecision.com
Yahoo! Groups Sponsor
ADVERTISEMENT
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
We are in the process of integrating data collection stations onto the shop
floor. We have purchased a touch screen solution encased in protection
cabinets. My question to the group is how do we set up data collection users
without exhausting a user license, and is there a way to launch the data
collection module automatically?
What I am mainly looking for is a logical thought process on how to handle
security. Any help would be appreciated.
Pablo Garza
---
## Post #15 by @system
We have found that setting up tweakui on the touch screens lets us lock
everything down on the Data Collection PC's. We then put the Data
Collection.vtg/Plant Floor.vtg in the startup group of Windows. When the
system is powered on, automatically logs on to our network (done with
tweakui) and then starts the Data Collections screen. In the data
collection.vtg file we added the line vantagelogin=username/password so that
it logs into Data Collections automatically. We also disabled all access to
anything else with tweakui and removed all desktop icons.
We have started using Terminal Services with a Flat Paneled Touch Screen all
in one thin client that we plan on replacing all of our current units with.
Its working very well.
Thanks
Jeremy
IT Manager
K-T Corporation
Vantage 5.1.113 SQL Server
---
## Post #16 by @system
Instead of launching the standard Vantage.vtg, use the
Data Collection.vtg. This won't use a full license.
(It also assumes you purchased Data Collection User
licenses from Epicor) A Data Collection user has
limited access to Vantage regardless of the Login ID.
That should help out on your security issue. We also
use a product called WinLock Pro that will also lock
the users out of workstation functions and once
configured properly pretty much shuts them out of
anything other than Vantage and reboot the PC.
--- Pablo Garza <
pgarza@...> wrote:
> We are in the process of integrating data collection
> stations onto the shop
> floor. We have purchased a touch screen solution
> encased in protection
> cabinets. My question to the group is how do we set
> up data collection users
> without exhausting a user license, and is there a
> way to launch the data
> collection module automatically?
> What I am mainly looking for is a logical thought
> process on how to handle
> security. Any help would be appreciated.
>
>
> Pablo Garza
>
> ------------------------ Yahoo! Groups Sponsor
>
> Useful links for the Yahoo!Groups Vantage Board are:
> ( Note: You must have already linked your email
> address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group
> for Report Builder and Crystal Reports and other
> 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage
> services goto:
> http://groups.yahoo.com/group/vantage/links
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
__________________________________________________
Do You Yahoo!?
Send FREE Valentine eCards with Yahoo! Greetings!
http://greetings.yahoo.comWith NT4.0 I use the system policy editor to lock down the desktop and disable the shutdown feature. This keeps people from exiting and waiting for restarting.
---
## Post #18 by @system
We are in the process of rolling out our data collection stations onto the
shop floor. We are having good success with our test department.
Our planning group asked a question regarding second shift reporting. Are
there any reports available that show our dayshift supervisors what jobs
were ran the previous shift, and by whom?
Any help with this would be greatly appreciated.
Best Regards,
Pablo Garza
Dix Metals, Inc
---
## Post #19 by @system
I have a problem with my Data Collection. Before a few month, I was
Vantage 5.0, and my data collection work with a VTG Data Collection.
With the new version Vantage 5.2, VTG Data Collection, it's not
appear. Is replaced by Plant Floor. The interface is not the same
thing. It's not good for me. Presenthly a open my data collection
with the licence vantage and not the licence Data Collection.
Do you have a solution for me ?
Nancy
---
## Post #20 by @system
Nancy,
Plant floor is the data collection - go into edit on the plant floor.vtg
file and make sure it says Vantagedatacollectionuser=yes and it shouldn't
use a full license. Make sure your desktop shortcuts are pointing to this
file. They still appear to be a user if you are looking in promon, but they
are not. Hope this helps....God Bless
Diane Rowberry
Westwood Precision, Inc.
-----Original Message-----
From: vonelist <
vonelist@...> [mailto:
vonelist@...]
Sent: Tuesday, January 07, 2003 5:51 AM
To:
vantage@yahoogroups.com
Subject: [Vantage] Data Collection
I have a problem with my Data Collection. Before a few month, I was
Vantage 5.0, and my data collection work with a VTG Data Collection.
With the new version Vantage 5.2, VTG Data Collection, it's not
appear. Is replaced by Plant Floor. The interface is not the same
thing. It's not good for me. Presenthly a open my data collection
with the licence vantage and not the licence Data Collection.
Do you have a solution for me ?
Nancy
[Non-text portions of this message have been removed]
We've used since day one (Sept. 2000) and it has worked very well. We went "cheap" with home built minimal PCs (Celeron 500Mhz at the time). We use keyboard line barcode scanner guns (spent for extra rugged) although we are not yet enforcing mandatory use. Total cost per location was about $700 not counting Vantage DC license. Training was a one hour session with small groups of people at the start and usage is easy enough that not much more was needed. Biggest negative issue has been entering piece counts accurately. Biggest unused potential benefit - getting people to enter labor notes to flag production problems so we would have a history for future jobs. Having real-time view during the day of job status has been very valuable. We don't do material bar coding, but have found it handy to scan UPS (and other shippers') tracking number directly from box label into packing slip field.
-Todd C.
-----Original Message-----
From: Kelly Wendorff [mailto:
kelly.wendorff@...]
Sent: Wednesday, May 14, 2003 10:59 AM
To: '
vantage@yahoogroups.com'
Subject: [Vantage] Data Collection
I have been assigned to start collection information regarding the Data
Collection module. Currently, we use manual labor and material collection
processes.
I would appreciate if anyone using the data collection module could provide
me feedback. I am concerned with the amount of training involved and
implementation time. Also, suggestions on hardware (bar coding, touch
screen, terminal entry...). Does anyone use bar coding to track material
receipts and material locations? How about Warehouse locations and shipping
info?
Feel free to contact me directly!
Thanks!
Kelly Wendorff
Cost Accounting Manager
SteelCraft Corp
105 SteelCraft Drive
Hartford, WI 53027
262-673-6770 ext 195
262-673-4380 Fax
Yahoo! Groups Sponsor
<
http://rd.yahoo.com/M=251812.3170658.4537139.1261774/D=egroupweb/S=1705007183:HM/A=1564416/R=0/*http://www.netflix.com/Default?mqso=60164797&partid=3170658>
<
http://us.adserver.yahoo.com/l?M=251812.3170658.4537139.1261774/D=egroupmail/S=:HM/A=1564416/rand=156097748>
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <
http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
We use Citrix and publish the Data Collection as an App. The clients
are running on Wyse 2610 SE LCD terminals (which we got on eBay for $100
ea), with a bar code wand.
Britt Moelling
M&M Manufacturing
-----Original Message-----
From: Kelly Wendorff [mailto:
kelly.wendorff@...]
Sent: Wednesday, May 14, 2003 10:59 AM
To: '
vantage@yahoogroups.com'
Subject: [Vantage] Data Collection
I have been assigned to start collection information regarding the Data
Collection module. Currently, we use manual labor and material
collection
processes.
I would appreciate if anyone using the data collection module could
provide
me feedback. I am concerned with the amount of training involved and
implementation time. Also, suggestions on hardware (bar coding, touch
screen, terminal entry...). Does anyone use bar coding to track
material
receipts and material locations? How about Warehouse locations and
shipping
info?
Feel free to contact me directly!
Thanks!
Kelly Wendorff
Cost Accounting Manager
SteelCraft Corp
105 SteelCraft Drive
Hartford, WI 53027
262-673-6770 ext 195
262-673-4380 Fax
Yahoo! Groups Sponsor
<
http://rd.yahoo.com/M=251812.3170658.4537139.1261774/D=egroupweb/S=1705
007183:HM/A=1564416/R=0/*http:/www.netflix.com/Default?mqso=60164797&par
tid=3170658>
<
http://us.adserver.yahoo.com/l?M=251812.3170658.4537139.1261774/D=egrou
pmail/S=:HM/A=1564416/rand=156097748>
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<
http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to the Yahoo!
<
http://docs.yahoo.com/info/terms/> Terms of Service.
[Non-text portions of this message have been removed]
Is anyone using any wireless handheld scanners or tablet PC's for data
collection? We are seeking a method to allow or mechanics to take a module
into the aircraft and collect labor hours without them having to all leave
the aircraft and clock from one operation to another. If anyone is doing
this can you explain the interface into Vantage, if via scanner, and are you
using this real-time or do you use batch processing?
Thanks in advance,
Michael Benedict
IS Manager
Crestview Aerospace Corp.
[Non-text portions of this message have been removed]
---
## Post #24 by @system
Does anybody know if entries made by data collectors on the shop
floor can be changed? The program only allow for one scrap reason
and in trying to bypass this we are considering having the operators
enter their total scrap under on reason code and then having a
clerical person change the entry to break the scrap up into the
different reasons by starting and stoping the activiy various times
recording only the scrap and the reasons.
---
## Post #25 by @system
you can edit any labor entries by going into job management/general
operations/labor entry.
If you want to edit today's shop employee entries, that particular person
must be out of data collection.
If they are still logged in, the entries are held in queue, and cannot be
viewed in the labor entry panel.
[Non-text portions of this message have been removed]
---
## Post #26 by @system
I do it everyday by going into labor entry
I can only do the day before entries unless the person logs out of
data collection
--- In vantage@yahoogroups.com, "joanfarver" <joan.farver@v...> wrote:
> Does anybody know if entries made by data collectors on the shop
> floor can be changed? The program only allow for one scrap reason
> and in trying to bypass this we are considering having the
operators
> enter their total scrap under on reason code and then having a
> clerical person change the entry to break the scrap up into the
> different reasons by starting and stoping the activiy various times
> recording only the scrap and the reasons.
For those that are using data collection, especially if you are running
DC 24 - 7, would you please share the specs/operating system of the
machines you are using it on.
Thanks!
Linda
lindafurio@...
As of October 6, 2003 our new address is:
11220 E. Main St., Huntley, IL 60142
Ph:(847)659-0100 Fax:(847)659-0108
Various from P-II-350Mhz/65MB RAM to Celeron 550Mhz/64MB RAM. All minimal HD, no CD, disabled floppy, pass protected BIOS. All Win-98. Shop floor with where the "bone" PCs go to die. We have enough locations and spare parts so if one goes out they can user others until repaired or replaced.
-Todd C.
-----Original Message-----
From: Linda Furio [mailto:
lindafurio@...]
Sent: Monday, November 17, 2003 11:09 AM
To:
vantage@yahoogroups.com
Subject: [Vantage] Data Collection
For those that are using data collection, especially if you are running
DC 24 - 7, would you please share the specs/operating system of the
machines you are using it on.
Thanks!
Linda
lindafurio@...
As of October 6, 2003 our new address is:
11220 E. Main St., Huntley, IL 60142
Ph:(847)659-0100 Fax:(847)659-0108
Yahoo! Groups Sponsor
ADVERTISEMENT
<
http://rd.yahoo.com/SIG=12chc1emk/M=267637.4116732.5333197.1261774/D=egroupweb/S=1705007183:HM/EXP=1069175376/A=1853619/R=0/*http://www.netflix.com/Default?mqso=60178356&partid=4116732> click here
<
http://us.adserver.yahoo.com/l?M=267637.4116732.5333197.1261774/D=egroupmail/S=:HM/A=1853619/rand=664802982>
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <
http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
Linda,
Not using scanners - all done thru manual input. But the 2 data collection
machines' specs are:
P2-266 256M RAM
P3-733 256M RAM
No Problems with the operation. But one is in really bad environment -
needs to be replaced once a year. I try to keep those machines as cheap as
possible and still be able to run the virus software and Drive Image at
night.
Gary Polvinale
Denton ATD
-----Original Message-----
From: Linda Furio [mailto:
lindafurio@...]
Sent: Monday, November 17, 2003 12:09 PM
To:
vantage@yahoogroups.com
Subject: [Vantage] Data Collection
For those that are using data collection, especially if you are running DC
24 - 7, would you please share the specs/operating system of the machines
you are using it on.
Thanks!
Linda
lindafurio@...
As of October 6, 2003 our new address is:
11220 E. Main St., Huntley, IL 60142
Ph:(847)659-0100 Fax:(847)659-0108
------------------------ Yahoo! Groups Sponsor ---------------------~--> Buy
Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark Printer
at MyInks.com. Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/PhFolB/TM
---------------------------------------------------------------------~->
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/We use Terminal Services and Thin Clients for 25 DC locations.
Jeremy Leonard
IT Manager
K-T Corporation
-----Original Message-----
From: Linda Furio [mailto:
lindafurio@...]
Sent: Monday, November 17, 2003 12:09 PM
To:
vantage@yahoogroups.com
Subject: [Vantage] Data Collection
For those that are using data collection, especially if you are running
DC 24 - 7, would you please share the specs/operating system of the
machines you are using it on.
Thanks!
Linda
lindafurio@...
As of October 6, 2003 our new address is:
11220 E. Main St., Huntley, IL 60142
Ph:(847)659-0100 Fax:(847)659-0108
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/We basically push our Office workstations down to Data Collection when
someone gets an upgrade. We have anything from a P200mzh on Win98 to PIII
733Mzh running Win2000pro.
Paul
-----Original Message-----
From: Linda Furio [mailto:
lindafurio@...]
Sent: Monday, November 17, 2003 11:09 AM
To:
vantage@yahoogroups.com
Subject: [Vantage] Data Collection
For those that are using data collection, especially if you are running
DC 24 - 7, would you please share the specs/operating system of the
machines you are using it on.
Thanks!
Linda
lindafurio@...
As of October 6, 2003 our new address is:
11220 E. Main St., Huntley, IL 60142
Ph:(847)659-0100 Fax:(847)659-0108
Yahoo! Groups Sponsor
ADVERTISEMENT
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
On Vantage 6.0.
The machines are slow, but...
I am running NT4 on each with 64 megs ram, 10/100 NICs, PII 233, small HD
(1.2 to 2.0 Gig), and a barcode reader (prox scanner, Keyboard wedge), one
with a touch screen, all with TweekUI to further restrict "playing". All
start DC at login and are set to login automatically.
Only other software on each is VNC for remote control.
Aaron Hoyt
Design Standards
-----Original Message-----
From: Linda Furio [mailto:
lindafurio@...]
Sent: Monday, November 17, 2003 12:09 PM
To:
vantage@yahoogroups.com
Subject: [Vantage] Data Collection
For those that are using data collection, especially if you are running
DC 24 - 7, would you please share the specs/operating system of the
machines you are using it on.
Thanks!
Linda
lindafurio@...
As of October 6, 2003 our new address is:
11220 E. Main St., Huntley, IL 60142
Ph:(847)659-0100 Fax:(847)659-0108
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/Old machines from office as slow as 300 MHz. 8 machines, Win2k, XP Pro and
one NT4.0 machine.
Dave Cole
Reeder & Kline
-----Original Message-----
From: Linda Furio [mailto:
lindafurio@...]
Sent: Monday, November 17, 2003 12:09 PM
To:
vantage@yahoogroups.com
Subject: [Vantage] Data Collection
For those that are using data collection, especially if you are running
DC 24 - 7, would you please share the specs/operating system of the
machines you are using it on.
Thanks!
Linda
lindafurio@...
As of October 6, 2003 our new address is:
11220 E. Main St., Huntley, IL 60142
Ph:(847)659-0100 Fax:(847)659-0108
Yahoo! Groups Sponsor
ADVERTISEMENT
<
http://rd.yahoo.com/SIG=12chc1emk/M=267637.4116732.5333197.1261774/D=egroup
web/S=1705007183:HM/EXP=1069175376/A=1853619/R=0/*
http://www.netflix.com/Def
ault?mqso=60178356&partid=4116732> click here
<
http://us.adserver.yahoo.com/l?M=267637.4116732.5333197.1261774/D=egroupmai
l/S=:HM/A=1853619/rand=664802982>
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<
http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<
http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<
http://groups.yahoo.com/group/vantage/links>
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<
http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
We replaced PC's wholesale when we installed Vantage two years ago. There
are 8 pc's in the shop for data collection. They are 800 MHz Celerons
running Win9SE, smallest drive I could get, integrated video, 128 meg ram.
Mitchell Kirby
V. P. Manufacturing
Riten Industries, Inc.
740-333-8719 Direct
800-338-0027 Sales
800-338-0717 FAX
-----Original Message-----
From: Linda Furio [mailto:
lindafurio@...]
Sent: Monday, November 17, 2003 12:09 PM
To:
vantage@yahoogroups.com
Subject: [Vantage] Data Collection
For those that are using data collection, especially if you are running
DC 24 - 7, would you please share the specs/operating system of the
machines you are using it on.
Thanks!
Linda
lindafurio@...
As of October 6, 2003 our new address is:
11220 E. Main St., Huntley, IL 60142
Ph:(847)659-0100 Fax:(847)659-0108
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/Thanks for all of your responses. I am passing them on to our computer
support person.
Thanks!
Linda
---
## Post #36 by @system
---
## Post #37 by @system
We replaced all data collection pcs in 2001. Dell Celeron 800, 128 meg ram.
Upgraded all from Win98 to W2K this spring.
Bob Bruton
Entek Corporation
[Non-text portions of this message have been removed]
---
## Post #38 by @system
We have 6 PC's for Data Collection, all around the Pentium 166 vintage with
32 Mg RAM, and they're still doing the job.
> -----Original Message-----
> From: Linda Furio [SMTP:lindafurio@...]
> Sent: Tuesday, November 18, 2003 4:09 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Data Collection
>
> For those that are using data collection, especially if you are running
> DC 24 - 7, would you please share the specs/operating system of the
> machines you are using it on.
>
> Thanks!
> Linda
> lindafurio@...
>
> As of October 6, 2003 our new address is:
> 11220 E. Main St., Huntley, IL 60142
> Ph:(847)659-0100 Fax:(847)659-0108
>
>
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
I am wondering how Non-Conformances are handled when there is multiple reasons for the Non-Conformances. We have found it to be cumbersome when a user enters data under Scrap and Non-Conformance when there is only one reason code available. We would like to be able to enter under these fields with multiple quantities and reason codes without opening and closing the screen when there are different reasons. Any input or suggestions please share them with me, thank you.
Sam Seitz
Specialist, ERP System
Cardington Yutaka Technologies, Inc.
Tel 419.864.8777, ext. 244
Fax 419.864.7841
Email mailto:
sseitz@...
www <
http://www.yutakatech.com/>
http://www.yutakatech.com/
PRIVATE AND CONFIDENTIAL: The sender intends to communicate the contents of this transmission only to the person to whom it is addressed. This transmission may contain information that is privileged, confidential or otherwise exempt from disclosure under applicable law. If the recipient of this transmission is not the designated recipient or the employee or agent responsible for delivering this transmission to the designated recipient, you are hereby notified that any dissemination or copying of this communication is strictly prohibited. If you have received this transmission in error, please notify me immediately by telephone (419) 864-8777.
[Non-text portions of this message have been removed]
When there is more than one, we use the scrap code for "other" then write
in the comments all the scrap reasons. All our scrap reports print the
operator comments in order to show this data. Stupid, I know, but it's the
only way we've figured out (that our operators are willing to do) so far.
This has always been a flaw IMHO. I've used Vantage for the past 10
years--two different companies--and attended several user group meetings in
the Twin Cities area, and this is a common issue at both of the companies
I've worked for and pretty much every company in the user group. And unless
I'm missing something, without custom programming, I only see two
options--punch in and out to record the data, or do it in the comments like
we do. Neither are good choices.
Amy O'Malley
Manufacturing Engineer
Synovis Interventional Solutions
Lino Lakes, MN
On 21 Jul 2004, Sam Seitz wrote:
> I am wondering how Non-Conformances are handled when there is multiple
> reasons for the Non-Conformances. We have found it to be cumbersome when
a
> user enters data under Scrap and Non-Conformance when there is only one
> reason code available. We would like to be able to enter under these
fields
> with multiple quantities and reason codes without opening and closing the
> screen when there are different reasons. Any input or suggestions please
> share them with me, thank you.
>
> Sam Seitz
> Specialist, ERP System
> Cardington Yutaka Technologies, Inc.
I contacted Vantage and they have this as an improvement feature. I
also had multiple reasons and
felt they should allow for this...
-----Original Message-----
From: Amy OMalley [mailto:omall004@...]
Sent: Wednesday, July 21, 2004 1:59 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Data Collection
When there is more than one, we use the scrap code for "other" then write
in the comments all the scrap reasons. All our scrap reports print the
operator comments in order to show this data. Stupid, I know, but it's the
only way we've figured out (that our operators are willing to do) so far.
This has always been a flaw IMHO. I've used Vantage for the past 10
years--two different companies--and attended several user group meetings in
the Twin Cities area, and this is a common issue at both of the companies
I've worked for and pretty much every company in the user group. And unless
I'm missing something, without custom programming, I only see two
options--punch in and out to record the data, or do it in the comments like
we do. Neither are good choices.
Amy O'Malley
Manufacturing Engineer
Synovis Interventional Solutions
Lino Lakes, MN
On 21 Jul 2004, Sam Seitz wrote:
> I am wondering how Non-Conformances are handled when there is multiple
> reasons for the Non-Conformances. We have found it to be cumbersome when
a
> user enters data under Scrap and Non-Conformance when there is only one
> reason code available. We would like to be able to enter under these
fields
> with multiple quantities and reason codes without opening and closing the
> screen when there are different reasons. Any input or suggestions please
> share them with me, thank you.
>
> Sam Seitz
> Specialist, ERP System
> Cardington Yutaka Technologies, Inc.
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
Yahoo! Groups Sponsor
ADVERTISEMENT
<http://us.ard.yahoo.com/SIG=129fevpai/M=295196.4901138.6071305.3001176/D=gr
oups/S=1705007183:HM/EXP=1090522778/A=2128215/R=0/SIG=10se96mf6/*http://comp
anion.yahoo.com> click here
<http://us.adserver.yahoo.com/l?M=295196.4901138.6071305.3001176/D=groups/S=
:HM/A=2128215/rand=301635078>
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
<http://groups.yahoo.com/group/vantage/>
* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
Is this improvement if Version 8.0 by customizing the screen?
--- In vantage@yahoogroups.com, Ron LaPean <rlapean@c...> wrote:
> I contacted Vantage and they have this as an improvement
feature. I
> also had multiple reasons and
> felt they should allow for this...
>
> -----Original Message-----
> From: Amy OMalley [mailto:omall004@u...]
> Sent: Wednesday, July 21, 2004 1:59 PM
> To: vantage@yahoogroups.com
> Subject: Re: [Vantage] Data Collection
>
>
> When there is more than one, we use the scrap code for "other" then
write
> in the comments all the scrap reasons. All our scrap reports print
the
> operator comments in order to show this data. Stupid, I know, but
it's the
> only way we've figured out (that our operators are willing to do)
so far.
>
> This has always been a flaw IMHO. I've used Vantage for the past 10
> years--two different companies--and attended several user group
meetings in
> the Twin Cities area, and this is a common issue at both of the
companies
> I've worked for and pretty much every company in the user group.
And unless
> I'm missing something, without custom programming, I only see two
> options--punch in and out to record the data, or do it in the
comments like
> we do. Neither are good choices.
>
> Amy O'Malley
> Manufacturing Engineer
> Synovis Interventional Solutions
> Lino Lakes, MN
>
> On 21 Jul 2004, Sam Seitz wrote:
> > I am wondering how Non-Conformances are handled when there is
multiple
> > reasons for the Non-Conformances. We have found it to be
cumbersome when
> a
> > user enters data under Scrap and Non-Conformance when there is
only one
> > reason code available. We would like to be able to enter under
these
> fields
> > with multiple quantities and reason codes without opening and
closing the
> > screen when there are different reasons. Any input or suggestions
please
> > share them with me, thank you.
> >
> > Sam Seitz
> > Specialist, ERP System
> > Cardington Yutaka Technologies, Inc.
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> <http://groups.yahoo.com/group/vantage/files/.>
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> <http://groups.yahoo.com/group/vantage/messages>
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> <http://groups.yahoo.com/group/vantage/links>
>
>
>
> Yahoo! Groups Sponsor
>
> ADVERTISEMENT
>
>
<http://us.ard.yahoo.com/SIG=129fevpai/M=295196.4901138.6071305.300117
6/D=gr
>
oups/S=1705007183:HM/EXP=1090522778/A=2128215/R=0/SIG=10se96mf6/*http:
//comp
> anion.yahoo.com> click here
>
> <http://us.adserver.yahoo.com/l?
M=295196.4901138.6071305.3001176/D=groups/S=
> :HM/A=2128215/rand=301635078>
>
>
> _____
>
> Yahoo! Groups Links
>
>
> * To visit your group on the web, go to:
> http://groups.yahoo.com/group/vantage/
> <http://groups.yahoo.com/group/vantage/>
>
>
> * To unsubscribe from this group, send an email to:
> vantage-unsubscribe@yahoogroups.com
> <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
>
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
> <http://docs.yahoo.com/info/terms/> .
>
>
>
>
> [Non-text portions of this message have been removed]
Is this improvement if Version 8.0 by customizing the screen?
--- In vantage@yahoogroups.com, Ron LaPean <rlapean@c...> wrote:
> I contacted Vantage and they have this as an improvement
feature. I
> also had multiple reasons and
> felt they should allow for this...
>
> -----Original Message-----
> From: Amy OMalley [mailto:omall004@u...]
> Sent: Wednesday, July 21, 2004 1:59 PM
> To: vantage@yahoogroups.com
> Subject: Re: [Vantage] Data Collection
>
>
> When there is more than one, we use the scrap code for "other" then
write
> in the comments all the scrap reasons. All our scrap reports print
the
> operator comments in order to show this data. Stupid, I know, but
it's the
> only way we've figured out (that our operators are willing to do)
so far.
>
> This has always been a flaw IMHO. I've used Vantage for the past 10
> years--two different companies--and attended several user group
meetings in
> the Twin Cities area, and this is a common issue at both of the
companies
> I've worked for and pretty much every company in the user group.
And unless
> I'm missing something, without custom programming, I only see two
> options--punch in and out to record the data, or do it in the
comments like
> we do. Neither are good choices.
>
> Amy O'Malley
> Manufacturing Engineer
> Synovis Interventional Solutions
> Lino Lakes, MN
>
> On 21 Jul 2004, Sam Seitz wrote:
> > I am wondering how Non-Conformances are handled when there is
multiple
> > reasons for the Non-Conformances. We have found it to be
cumbersome when
> a
> > user enters data under Scrap and Non-Conformance when there is
only one
> > reason code available. We would like to be able to enter under
these
> fields
> > with multiple quantities and reason codes without opening and
closing the
> > screen when there are different reasons. Any input or suggestions
please
> > share them with me, thank you.
> >
> > Sam Seitz
> > Specialist, ERP System
> > Cardington Yutaka Technologies, Inc.
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> <http://groups.yahoo.com/group/vantage/files/.>
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> <http://groups.yahoo.com/group/vantage/messages>
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> <http://groups.yahoo.com/group/vantage/links>
>
>
>
> Yahoo! Groups Sponsor
>
> ADVERTISEMENT
>
>
<http://us.ard.yahoo.com/SIG=129fevpai/M=295196.4901138.6071305.300117
6/D=gr
>
oups/S=1705007183:HM/EXP=1090522778/A=2128215/R=0/SIG=10se96mf6/*http:
//comp
> anion.yahoo.com> click here
>
> <http://us.adserver.yahoo.com/l?
M=295196.4901138.6071305.3001176/D=groups/S=
> :HM/A=2128215/rand=301635078>
>
>
> _____
>
> Yahoo! Groups Links
>
>
> * To visit your group on the web, go to:
> http://groups.yahoo.com/group/vantage/
> <http://groups.yahoo.com/group/vantage/>
>
>
> * To unsubscribe from this group, send an email to:
> vantage-unsubscribe@yahoogroups.com
> <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
>
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
> <http://docs.yahoo.com/info/terms/> .
>
>
>
>
> [Non-text portions of this message have been removed]
We are in search of a more efficient way of collecting labor. Currently our
operators use key board and mouse. Has anyone out there dealt with wireless
bar code scanning directly into Vantage?
Kathy Hambleton
Electron Energy Corporation
717-898-2294
717-898-0660 (fax)
---
## Post #46 by @system
Good Morning Everone.....
I have a question.....any thoughts you might have would be greatly
appreciated.
In my plant we have just started using data collection. We are
having 3 departments clocking into Vatnage. I have had some
complaints about the fact that some of the employees say they don't
know if they have clocked in successfully. Have any of you
experienced this problem and if so how did you resolve it/ My
thought was to have a splash screen come up when they hit the
login/logout button to return to the main screen come up and say "You
have successfuly clocked in" ... or soemthing along those lines.
What do you think? Is this doable? Should I contact Custom
programming for this?
thanks for any feed back!
Cheryl
---
## Post #47 by @system
Cheryl:
Although I can appreciate making it easier on the user, why waste the money
on Custom Programming?!
If they really want to know if they clocked in or not, why not just have
them put their number in again and
'see' if their detail shows up? If it doesn't, then they are in the right
screen to actually clock in.
Another thing to do is in the list of names, they can click on the first
letter of the name (for instance 'M' for Mike)
and just keep hitting the letter until they come to their name.
If I am not making any sense, let me know and I can elaborate more.
Sorry, I just hate wasting money on something that is just too easy.
HTH,
M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email:
mreddy@...
Phone: (850) 682-2746 x 272
-----Original Message-----
From: crigsbee1 [mailto:
Cherylr@...]
Sent: Thursday, March 10, 2005 9:53 AM
To:
vantage@yahoogroups.com
Subject: [Vantage] Data Collection
Good Morning Everone.....
I have a question.....any thoughts you might have would be greatly
appreciated.
In my plant we have just started using data collection. We are
having 3 departments clocking into Vatnage. I have had some
complaints about the fact that some of the employees say they don't
know if they have clocked in successfully. Have any of you
experienced this problem and if so how did you resolve it/ My
thought was to have a splash screen come up when they hit the
login/logout button to return to the main screen come up and say "You
have successfuly clocked in" ... or soemthing along those lines.
What do you think? Is this doable? Should I contact Custom
programming for this?
thanks for any feed back!
Cheryl
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
----------------------------------------------------------------------------
--
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
List of names? I don't think know what you mean?
-----Original Message-----
From: Manasa Reddy [mailto:
mreddy@...]
Sent: Thursday, March 10, 2005 11:14 AM
To:
vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
Cheryl:
Although I can appreciate making it easier on the user, why waste the money
on Custom Programming?!
If they really want to know if they clocked in or not, why not just have
them put their number in again and
'see' if their detail shows up? If it doesn't, then they are in the right
screen to actually clock in.
Another thing to do is in the list of names, they can click on the first
letter of the name (for instance 'M' for Mike)
and just keep hitting the letter until they come to their name.
If I am not making any sense, let me know and I can elaborate more.
Sorry, I just hate wasting money on something that is just too easy.
HTH,
M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email:
mreddy@...
Phone: (850) 682-2746 x 272
-----Original Message-----
From: crigsbee1 [mailto:
Cherylr@...]
Sent: Thursday, March 10, 2005 9:53 AM
To:
vantage@yahoogroups.com
Subject: [Vantage] Data Collection
Good Morning Everone.....
I have a question.....any thoughts you might have would be greatly
appreciated.
In my plant we have just started using data collection. We are
having 3 departments clocking into Vatnage. I have had some
complaints about the fact that some of the employees say they don't
know if they have clocked in successfully. Have any of you
experienced this problem and if so how did you resolve it/ My
thought was to have a splash screen come up when they hit the
login/logout button to return to the main screen come up and say "You
have successfuly clocked in" ... or soemthing along those lines.
What do you think? Is this doable? Should I contact Custom
programming for this?
thanks for any feed back!
Cheryl
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
----------------------------------------------------------------------------
--
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
<
http://us.ard.yahoo.com/SIG=129aijv7d/M=298184.6018725.7038619.3001176/D=groups/S=1705007183:HM/EXP=1110557295/A=2593423/R=0/SIG=11el9gslf/*http://www.netflix.com/Default?mqso=60190075> click here
<
http://us.adserver.yahoo.com/l?M=298184.6018725.7038619.3001176/D=groups/S=:HM/A=2593423/rand=943201838>
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com <mailto:
vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <
http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
Are you on 6.1? Are they clocking into Office Data Collection or Plant
Floor?
M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email: mreddy@...
Phone: (850) 682-2746 x 272
-----Original Message-----
From: Cheryl Rigsbee [mailto:Cherylr@...]
Sent: Thursday, March 10, 2005 10:20 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
List of names? I don't think know what you mean?
-----Original Message-----
From: Manasa Reddy [mailto:mreddy@...]
Sent: Thursday, March 10, 2005 11:14 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
Cheryl:
Although I can appreciate making it easier on the user, why waste the
money
on Custom Programming?!
If they really want to know if they clocked in or not, why not just have
them put their number in again and
'see' if their detail shows up? If it doesn't, then they are in the right
screen to actually clock in.
Another thing to do is in the list of names, they can click on the first
letter of the name (for instance 'M' for Mike)
and just keep hitting the letter until they come to their name.
If I am not making any sense, let me know and I can elaborate more.
Sorry, I just hate wasting money on something that is just too easy.
HTH,
M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email: mreddy@...
Phone: (850) 682-2746 x 272
-----Original Message-----
From: crigsbee1 [mailto:Cherylr@...]
Sent: Thursday, March 10, 2005 9:53 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Data Collection
Good Morning Everone.....
I have a question.....any thoughts you might have would be greatly
appreciated.
In my plant we have just started using data collection. We are
having 3 departments clocking into Vatnage. I have had some
complaints about the fact that some of the employees say they don't
know if they have clocked in successfully. Have any of you
experienced this problem and if so how did you resolve it/ My
thought was to have a splash screen come up when they hit the
login/logout button to return to the main screen come up and say "You
have successfuly clocked in" ... or soemthing along those lines.
What do you think? Is this doable? Should I contact Custom
programming for this?
thanks for any feed back!
Cheryl
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
--------------------------------------------------------------------------
--
--
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
<http://us.ard.yahoo.com/SIG=129aijv7d/M=298184.6018725.7038619.3001176/D=gr
oups/S=1705007183:HM/EXP=1110557295/A=2593423/R=0/SIG=11el9gslf/*http://www.
netflix.com/Default?mqso=60190075> click here
<http://us.adserver.yahoo.com/l?M=298184.6018725.7038619.3001176/D=groups/S=
:HM/A=2593423/rand=943201838>
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
----------------------------------------------------------------------------
--
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
---
## Post #50 by @system
Cheryl,
Manasa is referring to the office data collection screen (or previous to
V6).
Her idea of having the employee punch in there numbers again is valid.
If they are using a scan card of some form to make it easy it might help is
to put in employee photos and associate them to the numbers. That way if
they see their picture, they did it right.
Good luck,
Aaron Hoyt
Vantage Plastics
-----Original Message-----
From: Cheryl Rigsbee [mailto:Cherylr@...]
Sent: Thursday, March 10, 2005 11:20 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
List of names? I don't think know what you mean?
-----Original Message-----
From: Manasa Reddy [mailto:mreddy@...]
Sent: Thursday, March 10, 2005 11:14 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
Cheryl:
Although I can appreciate making it easier on the user, why waste the money
on Custom Programming?!
If they really want to know if they clocked in or not, why not just have
them put their number in again and
'see' if their detail shows up? If it doesn't, then they are in the right
screen to actually clock in.
Another thing to do is in the list of names, they can click on the first
letter of the name (for instance 'M' for Mike)
and just keep hitting the letter until they come to their name.
If I am not making any sense, let me know and I can elaborate more.
Sorry, I just hate wasting money on something that is just too easy.
HTH,
M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email: mreddy@...
Phone: (850) 682-2746 x 272
-----Original Message-----
From: crigsbee1 [mailto:Cherylr@...]
Sent: Thursday, March 10, 2005 9:53 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Data Collection
Good Morning Everone.....
I have a question.....any thoughts you might have would be greatly
appreciated.
In my plant we have just started using data collection. We are
having 3 departments clocking into Vatnage. I have had some
complaints about the fact that some of the employees say they don't
know if they have clocked in successfully. Have any of you
experienced this problem and if so how did you resolve it/ My
thought was to have a splash screen come up when they hit the
login/logout button to return to the main screen come up and say "You
have successfuly clocked in" ... or soemthing along those lines.
What do you think? Is this doable? Should I contact Custom
programming for this?
thanks for any feed back!
Cheryl
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
----------------------------------------------------------------------------
--
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
<http://us.ard.yahoo.com/SIG=129aijv7d/M=298184.6018725.7038619.3001176/D=g
roups/S=1705007183:HM/EXP=1110557295/A=2593423/R=0/SIG=11el9gslf/*http://www
.netflix.com/Default?mqso=60190075> click here
<http://us.adserver.yahoo.com/l?M=298184.6018725.7038619.3001176/D=groups/
S=:HM/A=2593423/rand=943201838>
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
---
## Post #51 by @system
Aah, yes, the photos, that was going to be the next thing I mentioned.......
M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email: mreddy@...
Phone: (850) 682-2746 x 272
-----Original Message-----
From: Aaron Hoyt [mailto:aaron.hoyt@...]
Sent: Thursday, March 10, 2005 10:32 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
Cheryl,
Manasa is referring to the office data collection screen (or previous to
V6).
Her idea of having the employee punch in there numbers again is valid.
If they are using a scan card of some form to make it easy it might help
is
to put in employee photos and associate them to the numbers. That way if
they see their picture, they did it right.
Good luck,
Aaron Hoyt
Vantage Plastics
-----Original Message-----
From: Cheryl Rigsbee [mailto:Cherylr@...]
Sent: Thursday, March 10, 2005 11:20 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
List of names? I don't think know what you mean?
-----Original Message-----
From: Manasa Reddy [mailto:mreddy@...]
Sent: Thursday, March 10, 2005 11:14 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
Cheryl:
Although I can appreciate making it easier on the user, why waste the
money
on Custom Programming?!
If they really want to know if they clocked in or not, why not just have
them put their number in again and
'see' if their detail shows up? If it doesn't, then they are in the right
screen to actually clock in.
Another thing to do is in the list of names, they can click on the first
letter of the name (for instance 'M' for Mike)
and just keep hitting the letter until they come to their name.
If I am not making any sense, let me know and I can elaborate more.
Sorry, I just hate wasting money on something that is just too easy.
HTH,
M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email: mreddy@...
Phone: (850) 682-2746 x 272
-----Original Message-----
From: crigsbee1 [mailto:Cherylr@...]
Sent: Thursday, March 10, 2005 9:53 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Data Collection
Good Morning Everone.....
I have a question.....any thoughts you might have would be greatly
appreciated.
In my plant we have just started using data collection. We are
having 3 departments clocking into Vatnage. I have had some
complaints about the fact that some of the employees say they don't
know if they have clocked in successfully. Have any of you
experienced this problem and if so how did you resolve it/ My
thought was to have a splash screen come up when they hit the
login/logout button to return to the main screen come up and say "You
have successfuly clocked in" ... or soemthing along those lines.
What do you think? Is this doable? Should I contact Custom
programming for this?
thanks for any feed back!
Cheryl
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
--------------------------------------------------------------------------
--
--
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
<http://us.ard.yahoo.com/SIG=129aijv7d/M=298184.6018725.7038619.3001176/D=g
roups/S=1705007183:HM/EXP=1110557295/A=2593423/R=0/SIG=11el9gslf/*http://www
.netflix.com/Default?mqso=60190075> click here
<http://us.adserver.yahoo.com/l?M=298184.6018725.7038619.3001176/D=groups/
S=:HM/A=2593423/rand=943201838>
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
----------------------------------------------------------------------------
--
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
---
## Post #52 by @system
5.1 going to 6.1 at the end of the month.
using plant floor
-----Original Message-----
From: Manasa Reddy [mailto:mreddy@...]
Sent: Thursday, March 10, 2005 11:32 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
Are you on 6.1? Are they clocking into Office Data Collection or Plant
Floor?
M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email: mreddy@...
Phone: (850) 682-2746 x 272
-----Original Message-----
From: Cheryl Rigsbee [mailto:Cherylr@...]
Sent: Thursday, March 10, 2005 10:20 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
List of names? I don't think know what you mean?
-----Original Message-----
From: Manasa Reddy [mailto:mreddy@...]
Sent: Thursday, March 10, 2005 11:14 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
Cheryl:
Although I can appreciate making it easier on the user, why waste the
money
on Custom Programming?!
If they really want to know if they clocked in or not, why not just have
them put their number in again and
'see' if their detail shows up? If it doesn't, then they are in the right
screen to actually clock in.
Another thing to do is in the list of names, they can click on the first
letter of the name (for instance 'M' for Mike)
and just keep hitting the letter until they come to their name.
If I am not making any sense, let me know and I can elaborate more.
Sorry, I just hate wasting money on something that is just too easy.
HTH,
M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email: mreddy@...
Phone: (850) 682-2746 x 272
-----Original Message-----
From: crigsbee1 [mailto:Cherylr@...]
Sent: Thursday, March 10, 2005 9:53 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Data Collection
Good Morning Everone.....
I have a question.....any thoughts you might have would be greatly
appreciated.
In my plant we have just started using data collection. We are
having 3 departments clocking into Vatnage. I have had some
complaints about the fact that some of the employees say they don't
know if they have clocked in successfully. Have any of you
experienced this problem and if so how did you resolve it/ My
thought was to have a splash screen come up when they hit the
login/logout button to return to the main screen come up and say "You
have successfuly clocked in" ... or soemthing along those lines.
What do you think? Is this doable? Should I contact Custom
programming for this?
thanks for any feed back!
Cheryl
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
--------------------------------------------------------------------------
--
--
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
< http://us.ard.yahoo.com/SIG=129aijv7d/M=298184.6018725.7038619.3001176/D=gr
oups/S=1705007183:HM/EXP=1110557295/A=2593423/R=0/SIG=11el9gslf/* http://www.
netflix.com/Default?mqso=60190075> click here
< http://us.adserver.yahoo.com/l?M=298184.6018725.7038619.3001176/D=groups/S=
:HM/A=2593423/rand=943201838>
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
< http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
----------------------------------------------------------------------------
--
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
<http://us.ard.yahoo.com/SIG=129ktslea/M=298184.6018725.7038619.3001176/D=groups/S=1705007183:HM/EXP=1110558526/A=2593423/R=0/SIG=11el9gslf/*http://www.netflix.com/Default?mqso=60190075> click here
<http://us.adserver.yahoo.com/l?M=298184.6018725.7038619.3001176/D=groups/S=:HM/A=2593423/rand=870214858>
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
---
## Post #53 by @system
I wish I could use the office data collection screen, but I don't have enough regular Vantage user licenses to let me do that. So I use the plant floor. Is there something I could be doing?
-----Original Message-----
From: Aaron Hoyt [mailto:aaron.hoyt@...]
Sent: Thursday, March 10, 2005 11:32 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
Cheryl,
Manasa is referring to the office data collection screen (or previous to
V6).
Her idea of having the employee punch in there numbers again is valid.
If they are using a scan card of some form to make it easy it might help is
to put in employee photos and associate them to the numbers. That way if
they see their picture, they did it right.
Good luck,
Aaron Hoyt
Vantage Plastics
-----Original Message-----
From: Cheryl Rigsbee [mailto:Cherylr@...]
Sent: Thursday, March 10, 2005 11:20 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
List of names? I don't think know what you mean?
-----Original Message-----
From: Manasa Reddy [mailto:mreddy@...]
Sent: Thursday, March 10, 2005 11:14 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
Cheryl:
Although I can appreciate making it easier on the user, why waste the money
on Custom Programming?!
If they really want to know if they clocked in or not, why not just have
them put their number in again and
'see' if their detail shows up? If it doesn't, then they are in the right
screen to actually clock in.
Another thing to do is in the list of names, they can click on the first
letter of the name (for instance 'M' for Mike)
and just keep hitting the letter until they come to their name.
If I am not making any sense, let me know and I can elaborate more.
Sorry, I just hate wasting money on something that is just too easy.
HTH,
M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email: mreddy@...
Phone: (850) 682-2746 x 272
-----Original Message-----
From: crigsbee1 [mailto:Cherylr@...]
Sent: Thursday, March 10, 2005 9:53 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Data Collection
Good Morning Everone.....
I have a question.....any thoughts you might have would be greatly
appreciated.
In my plant we have just started using data collection. We are
having 3 departments clocking into Vatnage. I have had some
complaints about the fact that some of the employees say they don't
know if they have clocked in successfully. Have any of you
experienced this problem and if so how did you resolve it/ My
thought was to have a splash screen come up when they hit the
login/logout button to return to the main screen come up and say "You
have successfuly clocked in" ... or soemthing along those lines.
What do you think? Is this doable? Should I contact Custom
programming for this?
thanks for any feed back!
Cheryl
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
----------------------------------------------------------------------------
--
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
< http://us.ard.yahoo.com/SIG=129aijv7d/M=298184.6018725.7038619.3001176/D=g
roups/S=1705007183:HM/EXP=1110557295/A=2593423/R=0/SIG=11el9gslf/* http://www
.netflix.com/Default?mqso=60190075> click here
< http://us.adserver.yahoo.com/l?M=298184.6018725.7038619.3001176/D=groups/
S=:HM/A=2593423/rand=943201838>
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
< http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
<http://us.ard.yahoo.com/SIG=12909135n/M=298184.6018725.7038619.3001176/D=groups/S=1705007183:HM/EXP=1110558797/A=2593423/R=0/SIG=11el9gslf/*http://www.netflix.com/Default?mqso=60190075> click here
<http://us.adserver.yahoo.com/l?M=298184.6018725.7038619.3001176/D=groups/S=:HM/A=2593423/rand=591255001>
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
---
## Post #54 by @system
Just like Aaron reminded me, take a picture of everyone and associate it to
what they clock in with (if you use their last 4 digits of their SS#, for
instance). Then all they would have to do is type their number in again and
see their picture. It will work on 5.1. It worked back on 4.0.
If you need more help, just give me a call if you want.
M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email: mreddy@...
Phone: (850) 682-2746 x 272
-----Original Message-----
From: Cheryl Rigsbee [mailto:Cherylr@...]
Sent: Thursday, March 10, 2005 10:38 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
5.1 going to 6.1 at the end of the month.
using plant floor
-----Original Message-----
From: Manasa Reddy [mailto:mreddy@...]
Sent: Thursday, March 10, 2005 11:32 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
Are you on 6.1? Are they clocking into Office Data Collection or Plant
Floor?
M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email: mreddy@...
Phone: (850) 682-2746 x 272
-----Original Message-----
From: Cheryl Rigsbee [mailto:Cherylr@...]
Sent: Thursday, March 10, 2005 10:20 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
List of names? I don't think know what you mean?
-----Original Message-----
From: Manasa Reddy [mailto:mreddy@...]
Sent: Thursday, March 10, 2005 11:14 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
Cheryl:
Although I can appreciate making it easier on the user, why waste the
money
on Custom Programming?!
If they really want to know if they clocked in or not, why not just have
them put their number in again and
'see' if their detail shows up? If it doesn't, then they are in the
right
screen to actually clock in.
Another thing to do is in the list of names, they can click on the first
letter of the name (for instance 'M' for Mike)
and just keep hitting the letter until they come to their name.
If I am not making any sense, let me know and I can elaborate more.
Sorry, I just hate wasting money on something that is just too easy.
HTH,
M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email: mreddy@...
Phone: (850) 682-2746 x 272
-----Original Message-----
From: crigsbee1 [mailto:Cherylr@...]
Sent: Thursday, March 10, 2005 9:53 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Data Collection
Good Morning Everone.....
I have a question.....any thoughts you might have would be greatly
appreciated.
In my plant we have just started using data collection. We are
having 3 departments clocking into Vatnage. I have had some
complaints about the fact that some of the employees say they don't
know if they have clocked in successfully. Have any of you
experienced this problem and if so how did you resolve it/ My
thought was to have a splash screen come up when they hit the
login/logout button to return to the main screen come up and say "You
have successfuly clocked in" ... or soemthing along those lines.
What do you think? Is this doable? Should I contact Custom
programming for this?
thanks for any feed back!
Cheryl
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
------------------------------------------------------------------------
--
--
--
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
<
http://us.ard.yahoo.com/SIG=129aijv7d/M=298184.6018725.7038619.3001176/D=gr
oups/S=1705007183:HM/EXP=1110557295/A=2593423/R=0/SIG=11el9gslf/*
http://www.
netflix.com/Default?mqso=60190075> click here
<
http://us.adserver.yahoo.com/l?M=298184.6018725.7038619.3001176/D=groups/S=
:HM/A=2593423/rand=943201838>
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
< http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
--------------------------------------------------------------------------
--
--
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
<http://us.ard.yahoo.com/SIG=129ktslea/M=298184.6018725.7038619.3001176/D=gr
oups/S=1705007183:HM/EXP=1110558526/A=2593423/R=0/SIG=11el9gslf/*http://www.
netflix.com/Default?mqso=60190075> click here
<http://us.adserver.yahoo.com/l?M=298184.6018725.7038619.3001176/D=groups/S=
:HM/A=2593423/rand=870214858>
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
----------------------------------------------------------------------------
--
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
---
## Post #55 by @system
Thanks so much for your help.
-----Original Message-----
From: Manasa Reddy [mailto:mreddy@...]
Sent: Thursday, March 10, 2005 11:47 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
Just like Aaron reminded me, take a picture of everyone and associate it to
what they clock in with (if you use their last 4 digits of their SS#, for
instance). Then all they would have to do is type their number in again and
see their picture. It will work on 5.1. It worked back on 4.0.
If you need more help, just give me a call if you want.
M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email: mreddy@...
Phone: (850) 682-2746 x 272
-----Original Message-----
From: Cheryl Rigsbee [mailto:Cherylr@...]
Sent: Thursday, March 10, 2005 10:38 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
5.1 going to 6.1 at the end of the month.
using plant floor
-----Original Message-----
From: Manasa Reddy [mailto:mreddy@...]
Sent: Thursday, March 10, 2005 11:32 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
Are you on 6.1? Are they clocking into Office Data Collection or Plant
Floor?
M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email: mreddy@...
Phone: (850) 682-2746 x 272
-----Original Message-----
From: Cheryl Rigsbee [mailto:Cherylr@...]
Sent: Thursday, March 10, 2005 10:20 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
List of names? I don't think know what you mean?
-----Original Message-----
From: Manasa Reddy [mailto:mreddy@...]
Sent: Thursday, March 10, 2005 11:14 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
Cheryl:
Although I can appreciate making it easier on the user, why waste the
money
on Custom Programming?!
If they really want to know if they clocked in or not, why not just have
them put their number in again and
'see' if their detail shows up? If it doesn't, then they are in the
right
screen to actually clock in.
Another thing to do is in the list of names, they can click on the first
letter of the name (for instance 'M' for Mike)
and just keep hitting the letter until they come to their name.
If I am not making any sense, let me know and I can elaborate more.
Sorry, I just hate wasting money on something that is just too easy.
HTH,
M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email: mreddy@...
Phone: (850) 682-2746 x 272
-----Original Message-----
From: crigsbee1 [mailto:Cherylr@...]
Sent: Thursday, March 10, 2005 9:53 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Data Collection
Good Morning Everone.....
I have a question.....any thoughts you might have would be greatly
appreciated.
In my plant we have just started using data collection. We are
having 3 departments clocking into Vatnage. I have had some
complaints about the fact that some of the employees say they don't
know if they have clocked in successfully. Have any of you
experienced this problem and if so how did you resolve it/ My
thought was to have a splash screen come up when they hit the
login/logout button to return to the main screen come up and say "You
have successfuly clocked in" ... or soemthing along those lines.
What do you think? Is this doable? Should I contact Custom
programming for this?
thanks for any feed back!
Cheryl
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
------------------------------------------------------------------------
--
--
--
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
<
http://us.ard.yahoo.com/SIG=129aijv7d/M=298184.6018725.7038619.3001176/D=gr
oups/S=1705007183:HM/EXP=1110557295/A=2593423/R=0/SIG=11el9gslf/*
http://www.
netflix.com/Default?mqso=60190075> click here
<
http://us.adserver.yahoo.com/l?M=298184.6018725.7038619.3001176/D=groups/S=
:HM/A=2593423/rand=943201838>
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
< http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
--------------------------------------------------------------------------
--
--
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
< http://us.ard.yahoo.com/SIG=129ktslea/M=298184.6018725.7038619.3001176/D=gr
oups/S=1705007183:HM/EXP=1110558526/A=2593423/R=0/SIG=11el9gslf/* http://www.
netflix.com/Default?mqso=60190075> click here
< http://us.adserver.yahoo.com/l?M=298184.6018725.7038619.3001176/D=groups/S=
:HM/A=2593423/rand=870214858>
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
< http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
----------------------------------------------------------------------------
--
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
<http://us.ard.yahoo.com/SIG=129s4t102/M=298184.6018725.7038619.3001176/D=groups/S=1705007183:HM/EXP=1110559289/A=2593423/R=0/SIG=11el9gslf/*http://www.netflix.com/Default?mqso=60190075> click here
<http://us.adserver.yahoo.com/l?M=298184.6018725.7038619.3001176/D=groups/S=:HM/A=2593423/rand=541060666>
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
---
## Post #56 by @system
No problem, just so you know, in your vantage directory (where the db folder
is located) there is another folder called EMPPHOTO. If you go with the
pictures, put them in that folder. Just name each folder with the number or
whatever they use to clock in with. That way their picture comes up when
they clock in.
Again, if you need more info, feel free to call.
M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email: mreddy@...
Phone: (850) 682-2746 x 272
-----Original Message-----
From: Cheryl Rigsbee [mailto:Cherylr@...]
Sent: Thursday, March 10, 2005 10:45 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
Thanks so much for your help.
-----Original Message-----
From: Manasa Reddy [mailto:mreddy@...]
Sent: Thursday, March 10, 2005 11:47 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
Just like Aaron reminded me, take a picture of everyone and associate it
to
what they clock in with (if you use their last 4 digits of their SS#, for
instance). Then all they would have to do is type their number in again
and
see their picture. It will work on 5.1. It worked back on 4.0.
If you need more help, just give me a call if you want.
M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email: mreddy@...
Phone: (850) 682-2746 x 272
-----Original Message-----
From: Cheryl Rigsbee [mailto:Cherylr@...]
Sent: Thursday, March 10, 2005 10:38 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
5.1 going to 6.1 at the end of the month.
using plant floor
-----Original Message-----
From: Manasa Reddy [mailto:mreddy@...]
Sent: Thursday, March 10, 2005 11:32 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
Are you on 6.1? Are they clocking into Office Data Collection or Plant
Floor?
M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email: mreddy@...
Phone: (850) 682-2746 x 272
-----Original Message-----
From: Cheryl Rigsbee [mailto:Cherylr@...]
Sent: Thursday, March 10, 2005 10:20 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
List of names? I don't think know what you mean?
-----Original Message-----
From: Manasa Reddy [mailto:mreddy@...]
Sent: Thursday, March 10, 2005 11:14 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Data Collection
Cheryl:
Although I can appreciate making it easier on the user, why waste the
money
on Custom Programming?!
If they really want to know if they clocked in or not, why not just
have
them put their number in again and
'see' if their detail shows up? If it doesn't, then they are in the
right
screen to actually clock in.
Another thing to do is in the list of names, they can click on the
first
letter of the name (for instance 'M' for Mike)
and just keep hitting the letter until they come to their name.
If I am not making any sense, let me know and I can elaborate more.
Sorry, I just hate wasting money on something that is just too easy.
HTH,
M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email: mreddy@...
Phone: (850) 682-2746 x 272
-----Original Message-----
From: crigsbee1 [mailto:Cherylr@...]
Sent: Thursday, March 10, 2005 9:53 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Data Collection
Good Morning Everone.....
I have a question.....any thoughts you might have would be greatly
appreciated.
In my plant we have just started using data collection. We are
having 3 departments clocking into Vatnage. I have had some
complaints about the fact that some of the employees say they don't
know if they have clocked in successfully. Have any of you
experienced this problem and if so how did you resolve it/ My
thought was to have a splash screen come up when they hit the
login/logout button to return to the main screen come up and say
"You
have successfuly clocked in" ... or soemthing along those lines.
What do you think? Is this doable? Should I contact Custom
programming for this?
thanks for any feed back!
Cheryl
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
have already linked your email address to a yahoo id to enable
access. )
(1) To access the Files Section of our Yahoo!Group for Report
Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
----------------------------------------------------------------------
--
--
--
--
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
<
http://us.ard.yahoo.com/SIG=129aijv7d/M=298184.6018725.7038619.3001176/D=gr
oups/S=1705007183:HM/EXP=1110557295/A=2593423/R=0/SIG=11el9gslf/*
http://www.
netflix.com/Default?mqso=60190075> click here
<
http://us.adserver.yahoo.com/l?M=298184.6018725.7038619.3001176/D=groups/S=
:HM/A=2593423/rand=943201838>
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
< http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
------------------------------------------------------------------------
--
--
--
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
<
http://us.ard.yahoo.com/SIG=129ktslea/M=298184.6018725.7038619.3001176/D=gr
oups/S=1705007183:HM/EXP=1110558526/A=2593423/R=0/SIG=11el9gslf/*
http://www.
netflix.com/Default?mqso=60190075> click here
<
http://us.adserver.yahoo.com/l?M=298184.6018725.7038619.3001176/D=groups/S=
:HM/A=2593423/rand=870214858>
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
< http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
--------------------------------------------------------------------------
--
--
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
<http://us.ard.yahoo.com/SIG=129s4t102/M=298184.6018725.7038619.3001176/D=gr
oups/S=1705007183:HM/EXP=1110559289/A=2593423/R=0/SIG=11el9gslf/*http://www.
netflix.com/Default?mqso=60190075> click here
<http://us.adserver.yahoo.com/l?M=298184.6018725.7038619.3001176/D=groups/S=
:HM/A=2593423/rand=541060666>
_____
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
----------------------------------------------------------------------------
--
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
---
## Post #57 by @system
When an operator ends an activity, what are the proper numbers to fill
in the "Current," "Scrap," and "Non-Conform" fields.
I am confused at what "Current" means.
If I made 10 parts and 2 of which I think are bad, would I put:
10 in the Current and 2 in the Non-Conform
-or-
8 in the Current and 2 in the Non-Conform.
Its the wording that gets me.
Thanks,
Ben
---
## Post #58 by @system
You would put 8 in current (what you currently made that is good).
2 in Scrap or NonConform depending on what your procedures are.
We usually would put 2 in scrap (these would go into the Inspection Pending
area).
HTH,
M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email:
mreddy@...
Phone: (850) 682-2746 x 272
-----Original Message-----
From: bbelzer42 [mailto:
bbelzer@...]
Sent: Monday, March 28, 2005 4:52 PM
To:
vantage@yahoogroups.com
Subject: [Vantage] Data Collection
When an operator ends an activity, what are the proper numbers to fill
in the "Current," "Scrap," and "Non-Conform" fields.
I am confused at what "Current" means.
If I made 10 parts and 2 of which I think are bad, would I put:
10 in the Current and 2 in the Non-Conform
-or-
8 in the Current and 2 in the Non-Conform.
Its the wording that gets me.
Thanks,
Ben
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Sponsor
ADVERTISEMENT
----------------------------------------------------------------------------
--
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
We are looking at deploying data collection on our shop floor. It will most likely be utilizing a wireless connection so we will have to use terminal server to access the data collection module.
Does anybody have any suggestions on any touch panel computers that run windows 2000 or XP? I want the computer and touch screen to be integrated encased in an industrial protective cover.
Also, is it possible to only have the data collection screen visible on the monitor so that the operator does not see any other part of vantage?
Thanks,
Jasper
[Non-text portions of this message have been removed]
---
## Post #60 by @system
The answer to your last question is yes...and you can even set it up to
where if the computer goes down, for whatever reason, and needs to be
rebooted, it can automatically log you on the network and onto data
collection (Plant Floor). We had to dummy proof over here from the
every beginning. Of course you need Terminal Server to do this.
HTH,
M. Manasa Reddy
ERP Systems Specialist
Crestview Aerospace Corporation
mmreddy@...
Phone: (850) 682-2746 x272
Cell: (850) 305-0931
Radio: 186*111*3414
________________________________
From:
vantage@yahoogroups.com [mailto:
vantage@yahoogroups.com] On Behalf
Of Jasper Recto
Sent: Wednesday, May 24, 2006 10:20 AM
To: Vantage Groups (E-mail)
Subject: [Vantage] Data Collection
We are looking at deploying data collection on our shop floor. It will
most likely be utilizing a wireless connection so we will have to use
terminal server to access the data collection module.
Does anybody have any suggestions on any touch panel computers that run
windows 2000 or XP? I want the computer and touch screen to be
integrated encased in an industrial protective cover.
Also, is it possible to only have the data collection screen visible on
the monitor so that the operator does not see any other part of vantage?
Thanks,
Jasper
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
SPONSORED LINKS
Manufacturing software
<
http://groups.yahoo.com/gads?t=ms&k=Manufacturing+software&w1=Manufactu
ring+software&w2=Membership+database+software&w3=Database+mortgage+softw
are&w4=Pda+database+software&w5=Database+management+software&w6=Database
+marketing+software&c=6&s=188&.sig=OG5F3819UOUOg63i0bu6kA>
Membership database software
<
http://groups.yahoo.com/gads?t=ms&k=Membership+database+software&w1=Man
ufacturing+software&w2=Membership+database+software&w3=Database+mortgage
+software&w4=Pda+database+software&w5=Database+management+software&w6=Da
tabase+marketing+software&c=6&s=188&.sig=N5BGdur84p-jyuOomcQdbQ>
Database mortgage software
<
http://groups.yahoo.com/gads?t=ms&k=Database+mortgage+software&w1=Manuf
acturing+software&w2=Membership+database+software&w3=Database+mortgage+s
oftware&w4=Pda+database+software&w5=Database+management+software&w6=Data
base+marketing+software&c=6&s=188&.sig=8rvcSQnCqJhTCZu-0Si39A>
Pda database software
<
http://groups.yahoo.com/gads?t=ms&k=Pda+database+software&w1=Manufactur
ing+software&w2=Membership+database+software&w3=Database+mortgage+softwa
re&w4=Pda+database+software&w5=Database+management+software&w6=Database+
marketing+software&c=6&s=188&.sig=u3KQrTRPAQfsWIT39aHDkg> Database
management software
<
http://groups.yahoo.com/gads?t=ms&k=Database+management+software&w1=Man
ufacturing+software&w2=Membership+database+software&w3=Database+mortgage
+software&w4=Pda+database+software&w5=Database+management+software&w6=Da
tabase+marketing+software&c=6&s=188&.sig=R3CF3ODPY4gwjDZjykQYvw>
Database marketing software
<
http://groups.yahoo.com/gads?t=ms&k=Database+marketing+software&w1=Manu
facturing+software&w2=Membership+database+software&w3=Database+mortgage+
software&w4=Pda+database+software&w5=Database+management+software&w6=Dat
abase+marketing+software&c=6&s=188&.sig=lmBkRUiBtvHI1u5dkymDcw>
________________________________
YAHOO! GROUPS LINKS
* Visit your group "vantage
<
http://groups.yahoo.com/group/vantage> " on the web.
* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:
vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <
http://docs.yahoo.com/info/terms/> .
________________________________
[Non-text portions of this message have been removed]
We have been using ELO Touch Screens for our data collection and they work very well. They are extremely durable and only require a quick wipe down every month or two just to clean them of oil/coolant mist and excessive fingerprints. The 15" model provides plenty of viewing space.
Dave Miller
Prince Industries, Inc.
-------------- Original message --------------
From: "Jasper Recto" <
jrecto@...>
We are looking at deploying data collection on our shop floor. It will most likely be utilizing a wireless connection so we will have to use terminal server to access the data collection module.
Does anybody have any suggestions on any touch panel computers that run windows 2000 or XP? I want the computer and touch screen to be integrated encased in an industrial protective cover.
Also, is it possible to only have the data collection screen visible on the monitor so that the operator does not see any other part of vantage?
Thanks,
Jasper
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
SPONSORED LINKS Manufacturing software Membership database software Database mortgage software
Pda database software Database management software Database marketing software
YAHOO! GROUPS LINKS
Visit your group "vantage" on the web.
To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]