Go to..
http://groups.yahoo.com/mygroups
Then, I believe the button is "Edit Email Preferences"
http://groups.yahoo.com/mygroups
Then, I believe the button is "Edit Email Preferences"
--- In vantage@y..., Bob Brink <rbrink@b...> wrote:
> How can I change from the digest version to the receipt of each
individual
> email at the time it is sent? In the past I was able to go to
> www.onelist.com to make the change.
>
> Thank you,
>
> Robert Brink
> rbrink@b...
>
> -----Original Message-----
> From: vantage@y... [mailto:vantage@y...]
> Sent: Monday, August 19, 2002 3:13 PM
> To: vantage@y...
> Subject: [Vantage] Digest Number 2014
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> --------------------------------------------------------------------
----
>
> There are 25 messages in this issue.
>
> Topics in this digest:
>
> 1. RE: [OT] Office Apps (word and Excel) opening slow across
network
> From: "Rick Gors" <rgors@o...>
> 2. RE: [OT] Office Apps (word and Excel) opening slow acro ss
network
> From: Les Tingley <ltingley@d...>
> 3. Re: [OT] Office Apps (word and Excel) opening slow across
network
> From: "Troy Funte" <tfunte@e...>
> 4. RE: [OT] Office Apps (word and Excel) opening slow acro ss
network
> From: Les Tingley <ltingley@d...>
> 5. [OT] Bar Codes
> From: "lptingley" <ltingley@d...>
> 6. RE: [OT] Bar Codes
> From: "Shirley Graver" <shirleyg@R...>
> 7. Stock Status Report Needed
> From: Marty Kuphall <marty.kuphall@u...>
> 8. RE: [OT] Bar Codes
> From: Les Tingley <ltingley@d...>
> 9. Re: [OT] Office Apps (word and Excel) opening slow across
network
> From: Wayne Cox <wmc20@x...>
> 10. RE: [OT] Office Apps (word and Excel) opening slow acro ss
network
> From: Les Tingley <ltingley@d...>
> 11. RE: [OT] Bar Codes
> From: Todd Caughey <caugheyt@h...>
> 12. RE: [OT] Bar Codes
> From: Les Tingley <ltingley@d...>
> 13. RE: [OT] Bar Codes
> From: "Shirley Graver" <shirleyg@R...>
> 14. RE: [OT] Bar Codes
> From: Les Tingley <ltingley@d...>
> 15. Split sales commissions
> From: "nduser10" <Mike.Passamonte@s...>
> 16. RE: [OT] Office Apps (word and Excel) opening slow acro ss
network
> From: "Moore, Jim (Anniston)" <jmoore@d...>
> 17. RE: Split sales commissions
> From: "Linda Furio" <lindafurio@i...>
> 18. Re: Split sales commissions
> From: Wayne Cox <wmc20@x...>
> 19. Moving Email
> From: Sandra Morse <smorse@b...>
> 20. Global Alerts
> From: Dina Hieber <dhieber@v...>
> 21. Re: Global Alerts
> From: "Troy Funte" <tfunte@e...>
> 22. Re: Moving Email
> From: "Troy Funte" <tfunte@e...>
> 23. RE: Moving Email
> From: "Shirley Graver" <shirleyg@R...>
> 24. Re: Security
> From: "r_van_hoy" <r_van_hoy@y...>
> 25. Re: Security
> From: "r_van_hoy" <r_van_hoy@y...>
>
>
>
______________________________________________________________________
__
>
______________________________________________________________________
__
>
> Message: 1
> Date: Mon, 19 Aug 2002 08:33:15 -0400
> From: "Rick Gors" <rgors@o...>
> Subject: RE: [OT] Office Apps (word and Excel) opening slow across
network
>
> People have been complaining about this that rarely even use Office
products
> (Word, if at all). They keep blaming Norton AntiVirus. I have had
my
> doubts about NAV, but never thought that I should be looking at
Vantage. My
> own machine slows way the heck down - I was thinking of ways to try
to
> finagle a nice new Pentium 4...
>
> Rick Gors
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
______________________________________________________________________
__
>
______________________________________________________________________
__
>
> Message: 2
> Date: Mon, 19 Aug 2002 08:44:59 -0400
> From: Les Tingley <ltingley@d...>
> Subject: RE: [OT] Office Apps (word and Excel) opening slow acro ss
network
>
> I initially questioned NAV myself, but disabled it on our
Accountant's
> machine long enough to find out that it was not the problem. I
still suspect
> some kind of issue with 5.1, and not releasing RAM properly. We
jumped from
> 3.0 to 5.1, so I can't say for certain that the problem started
with 5.1. We
> didn't have this issue with 3.0. In fact, we had no issues with
3.0. So much
> for progress. No pun intended. I second the P4. I just bought two
for a
> couple of our users, and time to Vantage Logon screen is just under
5
> seconds.
>
> Les Tingley
> MIS
> Decorated Products
>
> > -----Original Message-----
> > From: Rick Gors [SMTP:rgors@o...]
> > Sent: Monday, August 19, 2002 8:33 AM
> > To: vantage@y...
> > Subject: RE: [Vantage] [OT] Office Apps (word and Excel)
opening slow
> > across network
> >
> > People have been complaining about this that rarely even use
Office
> > products
> > (Word, if at all). They keep blaming Norton AntiVirus. I have
had my
> > doubts about NAV, but never thought that I should be looking at
Vantage.
> > My
> > own machine slows way the heck down - I was thinking of ways to
try to
> > finagle a nice new Pentium 4...
> >
> > Rick Gors
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
> > have already linked your email address to a yahoo id to enable
access. )
> > (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> > Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> > http://groups.yahoo.com/group/vantage/links
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
>
>
>
______________________________________________________________________
__
>
______________________________________________________________________
__
>
> Message: 3
> Date: Mon, 19 Aug 2002 09:02:44 -0400
> From: "Troy Funte" <tfunte@e...>
> Subject: Re: [OT] Office Apps (word and Excel) opening slow across
network
>
> Don't get too excited about a P4. One of the users who complains
about
> things slowing down in the afternoon has a Dell P4 1.8Ghz. They
reboot
> around 3 p.m. to shake the lag time. I think they have 256MB of
RAM. This
> mysterious problem doesn't seem to be prejudiced by processor speed.
>
> Troy Funte
> Liberty Electronics
>
>
>
> ----- Original Message -----
> From: Les Tingley
> To: vantage@y...
> Sent: Monday, August 19, 2002 8:44 AM
> Subject: RE: [Vantage] [OT] Office Apps (word and Excel) opening
slow
> across network
>
>
> I initially questioned NAV myself, but disabled it on our
Accountant's
> machine long enough to find out that it was not the problem. I
still
> suspect
> some kind of issue with 5.1, and not releasing RAM properly. We
jumped
> from
> 3.0 to 5.1, so I can't say for certain that the problem started
with 5.1.
> We
> didn't have this issue with 3.0. In fact, we had no issues with
3.0. So
> much
> for progress. No pun intended. I second the P4. I just bought two
for a
> couple of our users, and time to Vantage Logon screen is just
under 5
> seconds.
>
> Les Tingley
> MIS
> Decorated Products
>
> > -----Original Message-----
> > From: Rick Gors [SMTP:rgors@o...]
> > Sent: Monday, August 19, 2002 8:33 AM
> > To: vantage@y...
> > Subject: RE: [Vantage] [OT] Office Apps (word and Excel)
opening
> slow
> > across network
> >
> > People have been complaining about this that rarely even use
Office
> > products
> > (Word, if at all). They keep blaming Norton AntiVirus. I have
had my
> > doubts about NAV, but never thought that I should be looking at
Vantage.
> > My
> > own machine slows way the heck down - I was thinking of ways to
try to
> > finagle a nice new Pentium 4...
> >
> > Rick Gors
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note:
You must
> > have already linked your email address to a yahoo id to enable
access. )
> > (1) To access the Files Section of our Yahoo!Group for Report
Builder
> and
> > Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> > http://groups.yahoo.com/group/vantage/links
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
> have already linked your email address to a yahoo id to enable
access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
______________________________________________________________________
__
>
______________________________________________________________________
__
>
> Message: 4
> Date: Mon, 19 Aug 2002 09:10:33 -0400
> From: Les Tingley <ltingley@d...>
> Subject: RE: [OT] Office Apps (word and Excel) opening slow acro ss
network
>
> Thanks Troy. That's one more thing to rule out, and it still seems
to be
> pointing in the direction of RAM... Les
>
> > -----Original Message-----
> > From: Troy Funte [SMTP:tfunte@e...]
> > Sent: Monday, August 19, 2002 9:03 AM
> > To: vantage@y...
> > Subject: Re: [Vantage] [OT] Office Apps (word and Excel)
opening slow
> > across network
> >
> > Don't get too excited about a P4. One of the users who complains
about
> > things slowing down in the afternoon has a Dell P4 1.8Ghz. They
reboot
> > around 3 p.m. to shake the lag time. I think they have 256MB of
RAM.
> > This mysterious problem doesn't seem to be prejudiced by
processor speed.
> >
> > Troy Funte
> > Liberty Electronics
> >
> >
> >
> > ----- Original Message -----
> > From: Les Tingley
> > To: vantage@y...
> > Sent: Monday, August 19, 2002 8:44 AM
> > Subject: RE: [Vantage] [OT] Office Apps (word and Excel)
opening slow
> > across network
> >
> >
> > I initially questioned NAV myself, but disabled it on our
Accountant's
> > machine long enough to find out that it was not the problem. I
still
> > suspect
> > some kind of issue with 5.1, and not releasing RAM properly. We
jumped
> > from
> > 3.0 to 5.1, so I can't say for certain that the problem started
with
> > 5.1. We
> > didn't have this issue with 3.0. In fact, we had no issues with
3.0. So
> > much
> > for progress. No pun intended. I second the P4. I just bought
two for a
> > couple of our users, and time to Vantage Logon screen is just
under 5
> > seconds.
> >
> > Les Tingley
> > MIS
> > Decorated Products
> >
> > > -----Original Message-----
> > > From: Rick Gors [SMTP:rgors@o...]
> > > Sent: Monday, August 19, 2002 8:33 AM
> > > To: vantage@y...
> > > Subject: RE: [Vantage] [OT] Office Apps (word and Excel)
opening
> > slow
> > > across network
> > >
> > > People have been complaining about this that rarely even use
Office
> > > products
> > > (Word, if at all). They keep blaming Norton AntiVirus. I
have had my
> > > doubts about NAV, but never thought that I should be looking
at
> > Vantage.
> > > My
> > > own machine slows way the heck down - I was thinking of ways
to try to
> > > finagle a nice new Pentium 4...
> > >
> > > Rick Gors
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> > > Useful links for the Yahoo!Groups Vantage Board are: ( Note:
You must
> > > have already linked your email address to a yahoo id to
enable access.
> > )
> > > (1) To access the Files Section of our Yahoo!Group for Report
Builder
> > and
> > > Crystal Reports and other 'goodies', please goto:
> > > http://groups.yahoo.com/group/vantage/files/.
> > > (2) To search through old msg's goto:
> > > http://groups.yahoo.com/group/vantage/messages
> > > (3) To view links to Vendors that provide Vantage services
goto:
> > > http://groups.yahoo.com/group/vantage/links
> > >
> > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > >
> >
> > Yahoo! Groups Sponsor
> > ADVERTISEMENT
> >
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note:
You must
> > have already linked your email address to a yahoo id to enable
access. )
> > (1) To access the Files Section of our Yahoo!Group for Report
Builder
> > and Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> > http://groups.yahoo.com/group/vantage/links
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
> > have already linked your email address to a yahoo id to enable
access. )
> > (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> > Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> > http://groups.yahoo.com/group/vantage/links
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
>
>
>
______________________________________________________________________
__
>
______________________________________________________________________
__
>
> Message: 5
> Date: Mon, 19 Aug 2002 13:22:18 -0000
> From: "lptingley" <ltingley@d...>
> Subject: [OT] Bar Codes
>
> I recently purchased a Zebra 105Se, and now face the prospect of
> having to recreate all our Customer barcode labels. The labels were
> all created in software that comes with the Sato Lable printers.
Most
> of these labels require user prompts. I'm not an expert at
barcoding,
> and was hoping that somebody could tell me if it's possible to
create
> labels (with user prompts) that would be compatible with most label
> printers? I wouldn't want to do this again, if we decide that we
> didn't like the Zebras.
>
> Thanks,
>
> Les Tingley
> MIS
> Decorated Products
>
>
>
>
______________________________________________________________________
__
>
______________________________________________________________________
__
>
> Message: 6
> Date: Mon, 19 Aug 2002 09:43:01 -0400
> From: "Shirley Graver" <shirleyg@R...>
> Subject: RE: [OT] Bar Codes
>
> We have Zebra's Z4M. We will be generating our barcodes out of
Vantage.
> We've commissioned some mild programing to allow a Report Builder
Report to
> be run from a button click without any further user interaction.
We are
> converting over from Wasp Labeler. So far testing shows that this
will work
> quite nicely. For those interested in the programing should
contact Rick
> Lane off list. I've already found a bunch of uses for Report
builder
> reports from a VB button. I'll also share my report builder report
that I
> use for generating the the AIAG lables. My plan is to have a
button for the
> generic standard barcode and add buttons for those customers that
want a
> particular format. This would be done from the shipping detail
VB. So far
> I'm able to pull what ever data I need with special fields for
special data
> with some careful report building.
>
> Shirley Graver
> Systems Administrator
> Rubber Associates Inc.
> Cleveland/Akron, OH
> -----Original Message-----
> From: lptingley [mailto:ltingley@d...]
> Sent: Monday, August 19, 2002 9:22 AM
> To: vantage@y...
> Subject: [Vantage] [OT] Bar Codes
>
>
> I recently purchased a Zebra 105Se, and now face the prospect of
> having to recreate all our Customer barcode labels. The labels
were
> all created in software that comes with the Sato Lable printers.
Most
> of these labels require user prompts. I'm not an expert at
barcoding,
> and was hoping that somebody could tell me if it's possible to
create
> labels (with user prompts) that would be compatible with most
label
> printers? I wouldn't want to do this again, if we decide that we
> didn't like the Zebras.
>
> Thanks,
>
> Les Tingley
> MIS
> Decorated Products
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
> have already linked your email address to a yahoo id to enable
access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
______________________________________________________________________
__
>
______________________________________________________________________
__
>
> Message: 7
> Date: Mon, 19 Aug 2002 08:47:21 -0500
> From: Marty Kuphall <marty.kuphall@u...>
> Subject: Stock Status Report Needed
>
> I'm looking for either a Crystal or RB report similar to Vantage's
Stock
> Status report. The catch is I need it to be able to look at prior
cutoff
> dates (5/31/02 for example), not just the current On Hand Quantity.
(The
> ones in yahoo do not have this ability).
>
> Currently, for analysis purposes, we export it to Excel, add some
other
> data and then spend a whole lot of time formatting, adding formulas,
> deleting unnecessary columns, etc. My goal is to add a VB form or
two in
> Vantage and then have Crystal or RB do all the work that we are now
> doing in Excel.
>
> Any and all help is appreciated!!
> --
> Marty Kuphall
> Controller
> Ultra Tool & Mfg., Inc.
>
> Ph. 262-703-0455
> Fx. 262-703-0468
>
> marty.kuphall@u...
>
>
>
>
>
______________________________________________________________________
__
>
______________________________________________________________________
__
>
> Message: 8
> Date: Mon, 19 Aug 2002 10:25:52 -0400
> From: Les Tingley <ltingley@d...>
> Subject: RE: [OT] Bar Codes
>
> Hi Shirley,
> Are you recreating all of your Wasp Labels for the Zebra, or have
you found
> a way to convert them into the correct format?
>
> Les
>
> > -----Original Message-----
> > From: Shirley Graver [SMTP:shirleyg@R...]
> > Sent: Monday, August 19, 2002 9:43 AM
> > To: vantage@y...
> > Subject: RE: [Vantage] [OT] Bar Codes
> >
> > We have Zebra's Z4M. We will be generating our barcodes out of
Vantage.
> > We've commissioned some mild programing to allow a Report Builder
Report
> > to
> > be run from a button click without any further user interaction.
We are
> > converting over from Wasp Labeler. So far testing shows that
this will
> > work
> > quite nicely. For those interested in the programing should
contact Rick
> > Lane off list. I've already found a bunch of uses for Report
builder
> > reports from a VB button. I'll also share my report builder
report that I
> > use for generating the the AIAG lables. My plan is to have a
button for
> > the
> > generic standard barcode and add buttons for those customers that
want a
> > particular format. This would be done from the shipping detail
VB. So
> > far
> > I'm able to pull what ever data I need with special fields for
special
> > data
> > with some careful report building.
> >
> > Shirley Graver
> > Systems Administrator
> > Rubber Associates Inc.
> > Cleveland/Akron, OH
> > -----Original Message-----
> > From: lptingley [mailto:ltingley@d...]
> > Sent: Monday, August 19, 2002 9:22 AM
> > To: vantage@y...
> > Subject: [Vantage] [OT] Bar Codes
> >
> >
> > I recently purchased a Zebra 105Se, and now face the prospect of
> > having to recreate all our Customer barcode labels. The labels
were
> > all created in software that comes with the Sato Lable
printers. Most
> > of these labels require user prompts. I'm not an expert at
barcoding,
> > and was hoping that somebody could tell me if it's possible to
create
> > labels (with user prompts) that would be compatible with most
label
> > printers? I wouldn't want to do this again, if we decide that we
> > didn't like the Zebras.
> >
> > Thanks,
> >
> > Les Tingley
> > MIS
> > Decorated Products
> >
> >
> > Yahoo! Groups Sponsor
> > ADVERTISEMENT
> >
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note:
You must
> > have already linked your email address to a yahoo id to enable
access. )
> > (1) To access the Files Section of our Yahoo!Group for Report
Builder
> > and
> > Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> > http://groups.yahoo.com/group/vantage/links
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
> > have already linked your email address to a yahoo id to enable
access. )
> > (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> > Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> > http://groups.yahoo.com/group/vantage/links
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
>
>
>
______________________________________________________________________
__
>
______________________________________________________________________
__
>
> Message: 9
> Date: Mon, 19 Aug 2002 10:25:10 -0400
> From: Wayne Cox <wmc20@x...>
> Subject: Re: [OT] Office Apps (word and Excel) opening slow across
network
>
> At 09:02 AM 8/19/2002 -0400, you wrote:
> >Don't get too excited about a P4. One of the users who complains
about
> >things slowing down in the afternoon has a Dell P4 1.8Ghz. They
reboot
> >around 3 p.m. to shake the lag time. I think they have 256MB of
> >RAM. This mysterious
>
> Sounds like a nearly new PC, so it's probably running Win 2000 or
XP,
> no? Have you checked in the Task Manager to see if there's any
indication
> of a program hogging memory, or an overall shortage of memory?
>
> -Wayne Cox
> Twenty Three -- Information Technology Consulting
> 828-685-2338
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
______________________________________________________________________
__
>
______________________________________________________________________
__
>
> Message: 10
> Date: Mon, 19 Aug 2002 10:32:04 -0400
> From: Les Tingley <ltingley@d...>
> Subject: RE: [OT] Office Apps (word and Excel) opening slow acro ss
network
>
> I don't know about Troy's P4, our issues are running on P3's with
98Se...
> Les
>
> > -----Original Message-----
> > From: Wayne Cox [SMTP:wmc20@x...]
> > Sent: Monday, August 19, 2002 10:25 AM
> > To: vantage@y...
> > Subject: Re: [Vantage] [OT] Office Apps (word and Excel)
opening slow
> > across network
> >
> > At 09:02 AM 8/19/2002 -0400, you wrote:
> > >Don't get too excited about a P4. One of the users who
complains about
> > >things slowing down in the afternoon has a Dell P4 1.8Ghz. They
reboot
> > >around 3 p.m. to shake the lag time. I think they have 256MB of
> > >RAM. This mysterious
> >
> > Sounds like a nearly new PC, so it's probably running Win 2000 or
XP,
> > no? Have you checked in the Task Manager to see if there's any
indication
> >
> > of a program hogging memory, or an overall shortage of memory?
> >
> > -Wayne Cox
> > Twenty Three -- Information Technology Consulting
> > 828-685-2338
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
> > have already linked your email address to a yahoo id to enable
access. )
> > (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> > Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> > http://groups.yahoo.com/group/vantage/links
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
>
>
>
______________________________________________________________________
__
>
______________________________________________________________________
__
>
> Message: 11
> Date: Mon, 19 Aug 2002 09:36:01 -0500
> From: Todd Caughey <caugheyt@h...>
> Subject: RE: [OT] Bar Codes
>
> We too are using the Z4M with Report Builder and it has been great
(after a
> few startup driver issues). A seperate RB for each customer's
label format
> so had to create a sub-menu just for labels. Selections (job,
order,
> etc...) made via regular filters and any that require non-system
data are
> also passed via filter (parsing the filter string). After the
first few
> "flavors" were made all the rest were similar to an existing one so
new
> formats only take about 20 minutes. I don't think it would be
possible to
> export something from WASP that would fit into RB but designing
labels in RB
> is pretty easy.
> -Todd C
>
> -----Original Message-----
> From: Shirley Graver [mailto:shirleyg@R...]
> Sent: Monday, August 19, 2002 8:43 AM
> To: vantage@y...
> Subject: RE: [Vantage] [OT] Bar Codes
>
>
> We have Zebra's Z4M. We will be generating our barcodes out of
Vantage.
> We've commissioned some mild programing to allow a Report Builder
Report to
> be run from a button click without any further user interaction.
We are
> converting over from Wasp Labeler. So far testing shows that this
will work
> quite nicely. For those interested in the programing should
contact Rick
> Lane off list. I've already found a bunch of uses for Report
builder
> reports from a VB button. I'll also share my report builder report
that I
> use for generating the the AIAG lables. My plan is to have a
button for the
> generic standard barcode and add buttons for those customers that
want a
> particular format. This would be done from the shipping detail
VB. So far
> I'm able to pull what ever data I need with special fields for
special data
> with some careful report building.
>
> Shirley Graver
> Systems Administrator
> Rubber Associates Inc.
> Cleveland/Akron, OH
> -----Original Message-----
> From: lptingley [mailto:ltingley@d...]
> Sent: Monday, August 19, 2002 9:22 AM
> To: vantage@y...
> Subject: [Vantage] [OT] Bar Codes
>
>
> I recently purchased a Zebra 105Se, and now face the prospect of
> having to recreate all our Customer barcode labels. The labels
were
> all created in software that comes with the Sato Lable printers.
Most
> of these labels require user prompts. I'm not an expert at
barcoding,
> and was hoping that somebody could tell me if it's possible to
create
> labels (with user prompts) that would be compatible with most
label
> printers? I wouldn't want to do this again, if we decide that we
> didn't like the Zebras.
>
> Thanks,
>
> Les Tingley
> MIS
> Decorated Products
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
> have already linked your email address to a yahoo id to enable
access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> <http://groups.yahoo.com/group/vantage/files/.>
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> <http://groups.yahoo.com/group/vantage/messages>
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> <http://groups.yahoo.com/group/vantage/links>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Yahoo! Groups Sponsor
>
> ADVERTISEMENT
>
>
<http://rd.yahoo.com/M=213858.2225295.3666737.1829184/D=egroupweb/S=17
050071
> 83:HM/A=763352/R=0/*http://www.classmates.com/index.tf?s=5085>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> <http://groups.yahoo.com/group/vantage/files/.>
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> <http://groups.yahoo.com/group/vantage/messages>
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> <http://groups.yahoo.com/group/vantage/links>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/> .
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
______________________________________________________________________
__
>
______________________________________________________________________
__
>
> Message: 12
> Date: Mon, 19 Aug 2002 10:42:52 -0400
> From: Les Tingley <ltingley@d...>
> Subject: RE: [OT] Bar Codes
>
> Thanks Todd,
> RB really sounds like the way to go. I'm going to have to use VB
fields like
> Shirley, but that will be a one time shot. I'm just trying to avoid
possibly
> having to recreate them all again the future.
>
> Les
>
> > -----Original Message-----
> > From: Todd Caughey [SMTP:caugheyt@h...]
> > Sent: Monday, August 19, 2002 10:36 AM
> > To: 'vantage@y...'
> > Subject: RE: [Vantage] [OT] Bar Codes
> >
> > We too are using the Z4M with Report Builder and it has been
great (after
> > a
> > few startup driver issues). A seperate RB for each customer's
label
> > format
> > so had to create a sub-menu just for labels. Selections (job,
order,
> > etc...) made via regular filters and any that require non-system
data are
> > also passed via filter (parsing the filter string). After the
first few
> > "flavors" were made all the rest were similar to an existing one
so new
> > formats only take about 20 minutes. I don't think it would be
possible to
> > export something from WASP that would fit into RB but designing
labels in
> > RB
> > is pretty easy.
> > -Todd C
> >
> > -----Original Message-----
> > From: Shirley Graver [mailto:shirleyg@R...]
> > Sent: Monday, August 19, 2002 8:43 AM
> > To: vantage@y...
> > Subject: RE: [Vantage] [OT] Bar Codes
> >
> >
> > We have Zebra's Z4M. We will be generating our barcodes out of
Vantage.
> > We've commissioned some mild programing to allow a Report Builder
Report
> > to
> > be run from a button click without any further user interaction.
We are
> > converting over from Wasp Labeler. So far testing shows that
this will
> > work
> > quite nicely. For those interested in the programing should
contact Rick
> > Lane off list. I've already found a bunch of uses for Report
builder
> > reports from a VB button. I'll also share my report builder
report that I
> > use for generating the the AIAG lables. My plan is to have a
button for
> > the
> > generic standard barcode and add buttons for those customers that
want a
> > particular format. This would be done from the shipping detail
VB. So
> > far
> > I'm able to pull what ever data I need with special fields for
special
> > data
> > with some careful report building.
> >
> > Shirley Graver
> > Systems Administrator
> > Rubber Associates Inc.
> > Cleveland/Akron, OH
> > -----Original Message-----
> > From: lptingley [mailto:ltingley@d...]
> > Sent: Monday, August 19, 2002 9:22 AM
> > To: vantage@y...
> > Subject: [Vantage] [OT] Bar Codes
> >
> >
> > I recently purchased a Zebra 105Se, and now face the prospect of
> > having to recreate all our Customer barcode labels. The labels
were
> > all created in software that comes with the Sato Lable
printers. Most
> > of these labels require user prompts. I'm not an expert at
barcoding,
> > and was hoping that somebody could tell me if it's possible to
create
> > labels (with user prompts) that would be compatible with most
label
> > printers? I wouldn't want to do this again, if we decide that we
> > didn't like the Zebras.
> >
> > Thanks,
> >
> > Les Tingley
> > MIS
> > Decorated Products
> >
> >
> > Yahoo! Groups Sponsor
> > ADVERTISEMENT
> >
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note:
You must
> > have already linked your email address to a yahoo id to enable
access. )
> > (1) To access the Files Section of our Yahoo!Group for Report
Builder
> > and
> > Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.
> > <http://groups.yahoo.com/group/vantage/files/.>
> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > <http://groups.yahoo.com/group/vantage/messages>
> > (3) To view links to Vendors that provide Vantage services goto:
> > http://groups.yahoo.com/group/vantage/links
> > <http://groups.yahoo.com/group/vantage/links>
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > Yahoo! Groups Sponsor
> >
> > ADVERTISEMENT
> >
> >
<http://rd.yahoo.com/M=213858.2225295.3666737.1829184/D=egroupweb/S=17
0500
> > 71
> > 83:HM/A=763352/R=0/*http://www.classmates.com/index.tf?s=5085>
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
> > have
> > already linked your email address to a yahoo id to enable
access. )
> > (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> > Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.
> > <http://groups.yahoo.com/group/vantage/files/.>
> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > <http://groups.yahoo.com/group/vantage/messages>
> > (3) To view links to Vendors that provide Vantage services goto:
> > http://groups.yahoo.com/group/vantage/links
> > <http://groups.yahoo.com/group/vantage/links>
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
> > <http://docs.yahoo.com/info/terms/> .
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
> > have already linked your email address to a yahoo id to enable
access. )
> > (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> > Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> > http://groups.yahoo.com/group/vantage/links
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
>
>
>
______________________________________________________________________
__
>
______________________________________________________________________
__
>
> Message: 13
> Date: Mon, 19 Aug 2002 10:42:01 -0400
> From: "Shirley Graver" <shirleyg@R...>
> Subject: RE: [OT] Bar Codes
>
> What I've done is looked at everything done in Zebra. I found that
80% were
> a standard format, so I created the standard format and will run
samples
> for customer approval before we switch over. There's going to have
to be
> some discipline added to the shipping department because they
aren't going
> to be able to slop the data around like they've been able to do in
the past.
> This won't be an instant transition and it won't be necessarily
easy.
> "Cultural Resistance" is going to rear its ugly head. For those
customers
> that require "Special" I'll have to do another RB format. I'm
going to try
> and keep it to 2 buttons, one for the "Standard" and an elegant way
for each
> customer to get their special.
>
> Shirley
>
> -----Original Message-----
> From: Les Tingley [mailto:ltingley@d...]
> Sent: Monday, August 19, 2002 10:26 AM
> To: vantage@y...
> Subject: RE: [Vantage] [OT] Bar Codes
>
>
> Hi Shirley,
> Are you recreating all of your Wasp Labels for the Zebra, or have
you
> found
> a way to convert them into the correct format?
>
> Les
>
> > -----Original Message-----
> > From: Shirley Graver [SMTP:shirleyg@R...]
> > Sent: Monday, August 19, 2002 9:43 AM
> > To: vantage@y...
> > Subject: RE: [Vantage] [OT] Bar Codes
> >
> > We have Zebra's Z4M. We will be generating our barcodes out of
Vantage.
> > We've commissioned some mild programing to allow a Report
Builder Report
> > to
> > be run from a button click without any further user
interaction. We are
> > converting over from Wasp Labeler. So far testing shows that
this will
> > work
> > quite nicely. For those interested in the programing should
contact
> Rick
> > Lane off list. I've already found a bunch of uses for Report
builder
> > reports from a VB button. I'll also share my report builder
report that
> I
> > use for generating the the AIAG lables. My plan is to have a
button for
> > the
> > generic standard barcode and add buttons for those customers
that want a
> > particular format. This would be done from the shipping detail
VB. So
> > far
> > I'm able to pull what ever data I need with special fields for
special
> > data
> > with some careful report building.
> >
> > Shirley Graver
> > Systems Administrator
> > Rubber Associates Inc.
> > Cleveland/Akron, OH
> > -----Original Message-----
> > From: lptingley [mailto:ltingley@d...]
> > Sent: Monday, August 19, 2002 9:22 AM
> > To: vantage@y...
> > Subject: [Vantage] [OT] Bar Codes
> >
> >
> > I recently purchased a Zebra 105Se, and now face the prospect
of
> > having to recreate all our Customer barcode labels. The
labels were
> > all created in software that comes with the Sato Lable
printers. Most
> > of these labels require user prompts. I'm not an expert at
barcoding,
> > and was hoping that somebody could tell me if it's possible
to create
> > labels (with user prompts) that would be compatible with most
label
> > printers? I wouldn't want to do this again, if we decide that
we
> > didn't like the Zebras.
> >
> > Thanks,
> >
> > Les Tingley
> > MIS
> > Decorated Products
> >
> >
> > Yahoo! Groups Sponsor
> > ADVERTISEMENT
> >
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note:
You must
> > have already linked your email address to a yahoo id to enable
access. )
> > (1) To access the Files Section of our Yahoo!Group for Report
Builder
> > and
> > Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services
goto:
> > http://groups.yahoo.com/group/vantage/links
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note:
You must
> > have already linked your email address to a yahoo id to enable
access. )
> > (1) To access the Files Section of our Yahoo!Group for Report
Builder
> and
> > Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> > http://groups.yahoo.com/group/vantage/links
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
> have already linked your email address to a yahoo id to enable
access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
______________________________________________________________________
__
>
______________________________________________________________________
__
>
> Message: 14
> Date: Mon, 19 Aug 2002 10:53:38 -0400
> From: Les Tingley <ltingley@d...>
> Subject: RE: [OT] Bar Codes
>
> OK, Now you made my day. "Cultural Resistance" is an understatement
here.
> Changing the color of the Shipping Department's desktop, is enough
to bring
> things to a screeching halt... : ) Les
>
> > -----Original Message-----
> > From: Shirley Graver [SMTP:shirleyg@R...]
> > Sent: Monday, August 19, 2002 10:42 AM
> > To: vantage@y...
> > Subject: RE: [Vantage] [OT] Bar Codes
> >
> > What I've done is looked at everything done in Zebra. I found
that 80%
> > were
> > a standard format, so I created the standard format and will run
samples
> > for customer approval before we switch over. There's going to
have to be
> > some discipline added to the shipping department because they
aren't going
> > to be able to slop the data around like they've been able to do
in the
> > past.
> > This won't be an instant transition and it won't be necessarily
easy.
> > "Cultural Resistance" is going to rear its ugly head. For those
> > customers
> > that require "Special" I'll have to do another RB format. I'm
going to
> > try
> > and keep it to 2 buttons, one for the "Standard" and an elegant
way for
> > each
> > customer to get their special.
> >
> > Shirley
> >
> > -----Original Message-----
> > From: Les Tingley [mailto:ltingley@d...]
> > Sent: Monday, August 19, 2002 10:26 AM
> > To: vantage@y...
> > Subject: RE: [Vantage] [OT] Bar Codes
> >
> >
> > Hi Shirley,
> > Are you recreating all of your Wasp Labels for the Zebra, or
have you
> > found
> > a way to convert them into the correct format?
> >
> > Les
> >
> > > -----Original Message-----
> > > From: Shirley Graver [SMTP:shirleyg@R...]
> > > Sent: Monday, August 19, 2002 9:43 AM
> > > To: vantage@y...
> > > Subject: RE: [Vantage] [OT] Bar Codes
> > >
> > > We have Zebra's Z4M. We will be generating our barcodes out
of
> > Vantage.
> > > We've commissioned some mild programing to allow a Report
Builder
> > Report
> > > to
> > > be run from a button click without any further user
interaction. We
> > are
> > > converting over from Wasp Labeler. So far testing shows that
this
> > will
> > > work
> > > quite nicely. For those interested in the programing should
contact
> > Rick
> > > Lane off list. I've already found a bunch of uses for Report
builder
> > > reports from a VB button. I'll also share my report builder
report
> > that
> > I
> > > use for generating the the AIAG lables. My plan is to have a
button
> > for
> > > the
> > > generic standard barcode and add buttons for those customers
that want
> > a
> > > particular format. This would be done from the shipping
detail VB.
> > So
> > > far
> > > I'm able to pull what ever data I need with special fields
for special
> > > data
> > > with some careful report building.
> > >
> > > Shirley Graver
> > > Systems Administrator
> > > Rubber Associates Inc.
> > > Cleveland/Akron, OH
> > > -----Original Message-----
> > > From: lptingley [mailto:ltingley@d...]
> > > Sent: Monday, August 19, 2002 9:22 AM
> > > To: vantage@y...
> > > Subject: [Vantage] [OT] Bar Codes
> > >
> > >
> > > I recently purchased a Zebra 105Se, and now face the
prospect of
> > > having to recreate all our Customer barcode labels. The
labels were
> > > all created in software that comes with the Sato Lable
printers.
> > Most
> > > of these labels require user prompts. I'm not an expert at
> > barcoding,
> > > and was hoping that somebody could tell me if it's possible
to
> > create
> > > labels (with user prompts) that would be compatible with
most label
> > > printers? I wouldn't want to do this again, if we decide
that we
> > > didn't like the Zebras.
> > >
> > > Thanks,
> > >
> > > Les Tingley
> > > MIS
> > > Decorated Products
> > >
> > >
> > > Yahoo! Groups Sponsor
> > > ADVERTISEMENT
> > >
> > >
> > >
> > > Useful links for the Yahoo!Groups Vantage Board are: (
Note: You
> > must
> > > have already linked your email address to a yahoo id to
enable access.
> > )
> > > (1) To access the Files Section of our Yahoo!Group for
Report
> > Builder
> > > and
> > > Crystal Reports and other 'goodies', please goto:
> > > http://groups.yahoo.com/group/vantage/files/.
> > > (2) To search through old msg's goto:
> > > http://groups.yahoo.com/group/vantage/messages
> > > (3) To view links to Vendors that provide Vantage services
goto:
> > > http://groups.yahoo.com/group/vantage/links
> > >
> > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> > > Useful links for the Yahoo!Groups Vantage Board are: ( Note:
You must
> > > have already linked your email address to a yahoo id to
enable access.
> > )
> > > (1) To access the Files Section of our Yahoo!Group for Report
Builder
> > and
> > > Crystal Reports and other 'goodies', please goto:
> > > http://groups.yahoo.com/group/vantage/files/.
> > > (2) To search through old msg's goto:
> > > http://groups.yahoo.com/group/vantage/messages
> > > (3) To view links to Vendors that provide Vantage services
goto:
> > > http://groups.yahoo.com/group/vantage/links
> > >
> > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > >
> >
> > Yahoo! Groups Sponsor
> > ADVERTISEMENT
> >
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note:
You must
> > have already linked your email address to a yahoo id to enable
access. )
> > (1) To access the Files Section of our Yahoo!Group for Report
Builder
> > and
> > Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> > http://groups.yahoo.com/group/vantage/links
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
> > have already linked your email address to a yahoo id to enable
access. )
> > (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> > Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> > http://groups.yahoo.com/group/vantage/links
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
>
>
>
______________________________________________________________________
__
>
______________________________________________________________________
__
>
> Message: 15
> Date: Mon, 19 Aug 2002 14:53:01 -0000
> From: "nduser10" <Mike.Passamonte@s...>
> Subject: Split sales commissions
>
> Does anybody out there have a way to handle split sales commissions
> in Vantage 5.1
>
>
> Thanks
>
> Mike Passamonte
> Satcon Electronics
>
>
>
>
______________________________________________________________________
__
>
______________________________________________________________________
__
>
> Message: 16
> Date: Mon, 19 Aug 2002 09:56:17 -0500
> From: "Moore, Jim (Anniston)" <jmoore@d...>
> Subject: RE: [OT] Office Apps (word and Excel) opening slow acro ss
network
>
> XP users experiencing slow network share access might want to look
at this
> registry hack.
> http://is-it-true.org/nt/xp/atips/atips14.shtml
>
> Jim Moore
> GD-OTS
>
>
> -----Original Message-----
> From: Les Tingley [mailto:ltingley@d...]
> Sent: Monday, August 19, 2002 9:32 AM
> To: vantage@y...
> Subject: RE: [Vantage] [OT] Office Apps (word and Excel) opening
slow
> acro ss network
>
>
> I don't know about Troy's P4, our issues are running on P3's with
98Se...
> Les
>
> > -----Original Message-----
> > From: Wayne Cox [SMTP:wmc20@x...]
> > Sent: Monday, August 19, 2002 10:25 AM
> > To: vantage@y...
> > Subject: Re: [Vantage] [OT] Office Apps (word and Excel)
opening slow
> > across network
> >
> > At 09:02 AM 8/19/2002 -0400, you wrote:
> > >Don't get too excited about a P4. One of the users who
complains about
> > >things slowing down in the afternoon has a Dell P4 1.8Ghz. They
reboot
> > >around 3 p.m. to shake the lag time. I think they have 256MB of
> > >RAM. This mysterious
> >
> > Sounds like a nearly new PC, so it's probably running Win 2000 or
XP,
> > no? Have you checked in the Task Manager to see if there's any
indication
> >
> > of a program hogging memory, or an overall shortage of memory?
> >
> > -Wayne Cox
> > Twenty Three -- Information Technology Consulting
> > 828-685-2338
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
> > have already linked your email address to a yahoo id to enable
access. )
> > (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> > Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> > http://groups.yahoo.com/group/vantage/links
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
>
______________________________________________________________________
__
>
______________________________________________________________________
__
>
> Message: 17
> Date: Mon, 19 Aug 2002 10:18:39 -0500
> From: "Linda Furio" <lindafurio@i...>
> Subject: RE: Split sales commissions
>
> You need to go into the header of each invoice, choose
salespersons and
> then enter each sales rep that will get a commission for that
invoice. Then
> go into each line of the invoice, go to commissions and enter the
correct
> %'s for each rep's split and rate. You can actually do this from
order
> entry or A/R invoicing
>
> Linda Furio
> lindafurio@i...
>
> -----Original Message-----
> From: nduser10 [mailto:Mike.Passamonte@s...]
> Sent: Monday, August 19, 2002 9:53 AM
> To: vantage@y...
> Subject: [Vantage] Split sales commissions
>
> Does anybody out there have a way to handle split sales commissions
> in Vantage 5.1
>
>
> Thanks
>
> Mike Passamonte
> Satcon Electronics
>
>
>
>
>
>
>
______________________________________________________________________
__
>
______________________________________________________________________
__
>
> Message: 18
> Date: Mon, 19 Aug 2002 11:42:33 -0400
> From: Wayne Cox <wmc20@x...>
> Subject: Re: Split sales commissions
>
> At 02:53 PM 8/19/2002 +0000, you wrote:
> >Does anybody out there have a way to handle split sales
commissions in
> >Vantage 5.1
>
> What trouble are you running into specifically? The order entry
screen
> allows you to enter multiple sales persons with their own
commission rates,
> and the canned report in the system handles them ok. The way the
data is
> stored makes it a real p.i.t.a. to write your own reports, though.
> -Wayne
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
______________________________________________________________________
__
>
______________________________________________________________________
__
>
> Message: 19
> Date: Mon, 19 Aug 2002 13:51:50 -0500
> From: Sandra Morse <smorse@b...>
> Subject: Moving Email
>
> I have just installed three W2000 pc's with MS Outlook. The PC's
that their
> emails were on are W98 Outlook Express. I have gotten the address
books
> exported from the W98's and imprted into the W2000's but I can't
get the
> saved email that is not in the inbox to come over. I tried export
but that
> didn't work -- it seems like the emails are on the server in the
mailbox but
> they will not download to the pc. Do you have to create a folder
of the
> same name on the pc or what?
>
> Any and all help will be appreciated!!!
>
> Sandy Morse
> BVR Aero Precision Corporation
>
>
>
______________________________________________________________________
__
>
______________________________________________________________________
__
>
> Message: 20
> Date: Mon, 19 Aug 2002 14:53:09 -0400
> From: Dina Hieber <dhieber@v...>
> Subject: Global Alerts
>
> Hello,
>
> I am trying to implement global Alerts, for when orders are
shipped. We
> have never used alerts before but we are restructuring our parts
dept.
> Which now this feature would be useful.
>
> This is what I did. I went to global alerts, changed to send
alerts and
> memo. I added a to: (dhieber@v...). And exited.
> Which to me this was straight forward. But when the shipping
dept.
> shipped are part, I did not receive the email.
>
> has anyone successfully set up global alerts. Am I missing
something.
>
> BTW - I am using Netscape.
>
> Thanks,
>
> --
> Dina M. Hieber
> Vamco International, Inc.
> 555 Epsilon Drive
> Pittsburgh, PA 15238
> (412) 963-7100 - phone
> (412) 963-9511 - fax
>
> www.vamcointernational.com
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
______________________________________________________________________
__
>
______________________________________________________________________
__
>
> Message: 21
> Date: Mon, 19 Aug 2002 14:56:42 -0400
> From: "Troy Funte" <tfunte@e...>
> Subject: Re: Global Alerts
>
> Each Order has to be checked to "Send Alert" as well.
>
> Troy Funte
> Liberty Electronics
>
> ----- Original Message -----
> From: Dina Hieber
> To: vantage@y...
> Sent: Monday, August 19, 2002 2:53 PM
> Subject: [Vantage] Global Alerts
>
>
> Hello,
>
> I am trying to implement global Alerts, for when orders are
shipped. We
> have never used alerts before but we are restructuring our parts
dept.
> Which now this feature would be useful.
>
> This is what I did. I went to global alerts, changed to send
alerts and
> memo. I added a to: (dhieber@v...). And exited.
> Which to me this was straight forward. But when the shipping
dept.
> shipped are part, I did not receive the email.
>
> has anyone successfully set up global alerts. Am I missing
something.
>
> BTW - I am using Netscape.
>
> Thanks,
>
> --
> Dina M. Hieber
> Vamco International, Inc.
> 555 Epsilon Drive
> Pittsburgh, PA 15238
> (412) 963-7100 - phone
> (412) 963-9511 - fax
>
> www.vamcointernational.com
>
>
>
> [Non-text portions of this message have been removed]
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
> have already linked your email address to a yahoo id to enable
access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
______________________________________________________________________
__
>
______________________________________________________________________
__
>
> Message: 22
> Date: Mon, 19 Aug 2002 14:58:37 -0400
> From: "Troy Funte" <tfunte@e...>
> Subject: Re: Moving Email
>
> Sandra,
> Try moving the W98 OE email files and put them into the folder
where
> Outlook on the W2000 PC stores email.
>
> Troy Funte
> Liberty Electronics
>
> ----- Original Message -----
> From: Sandra Morse
> To: vantage@y...
> Sent: Monday, August 19, 2002 2:51 PM
> Subject: [Vantage] Moving Email
>
>
> I have just installed three W2000 pc's with MS Outlook. The PC's
that
> their
> emails were on are W98 Outlook Express. I have gotten the
address books
> exported from the W98's and imprted into the W2000's but I can't
get the
> saved email that is not in the inbox to come over. I tried
export but
> that
> didn't work -- it seems like the emails are on the server in the
mailbox
> but
> they will not download to the pc. Do you have to create a folder
of the
> same name on the pc or what?
>
> Any and all help will be appreciated!!!
>
> Sandy Morse
> BVR Aero Precision Corporation
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
> have already linked your email address to a yahoo id to enable
access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
______________________________________________________________________
__
>
______________________________________________________________________
__
>
> Message: 23
> Date: Mon, 19 Aug 2002 15:10:15 -0400
> From: "Shirley Graver" <shirleyg@R...>
> Subject: RE: Moving Email
>
> Sandra,
> What you need to do is to do a search for *.PST this is the
file that
> holds all of Outlooks, tasks, mail, calander, etc etc. What I've
done is
> set up a secure directory for each user on the server. Then I've
mapped the
> outlook path to that *.pst file. This way if a system crashes all
of a
> user's outlook stuff is intact.
>
> Shirley
>
> -----Original Message-----
> From: Sandra Morse [mailto:smorse@b...]
> Sent: Monday, August 19, 2002 2:52 PM
> To: vantage@y...
> Subject: [Vantage] Moving Email
>
>
> I have just installed three W2000 pc's with MS Outlook. The PC's
that
> their
> emails were on are W98 Outlook Express. I have gotten the
address books
> exported from the W98's and imprted into the W2000's but I can't
get the
> saved email that is not in the inbox to come over. I tried
export but
> that
> didn't work -- it seems like the emails are on the server in the
mailbox
> but
> they will not download to the pc. Do you have to create a folder
of the
> same name on the pc or what?
>
> Any and all help will be appreciated!!!
>
> Sandy Morse
> BVR Aero Precision Corporation
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
> have already linked your email address to a yahoo id to enable
access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
______________________________________________________________________
__
>
______________________________________________________________________
__
>
> Message: 24
> Date: Mon, 19 Aug 2002 19:12:25 -0000
> From: "r_van_hoy" <r_van_hoy@y...>
> Subject: Re: Security
>
> Shirley,
>
> Me to please. Could you fire that one my way too?
> Thanks,
> Robert Van Hoy
> robert.e.vanhoy@r...
>
>
>
>
>
>
>
>
______________________________________________________________________
__
>
______________________________________________________________________
__
>
> Message: 25
> Date: Mon, 19 Aug 20<br/><br/>(Message over 64 KB, truncated)