Estimating with Vantage 6.1

Yahoo Archive
1
Because the estimates are variable, I don't think operation standards
would work for us.
Thx,

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Frank Zeigafuse
Sent: Friday, June 10, 2005 2:25 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Estimating with Vantage 6.1

Have you tried operation standards?
You might be able to make everyone happy get you run time / setup
information for costing and scheduling and you can have comments. Might
work.

Frank Zeigafuse
Innovative Office Products
General Manager
Direct Phone: 610-559-6369
Email: fzeigafuse@...

Visit www.one.org to see how the world can be changed one person at a
time.



-----Original Message-----
From: PLAMAN DICK [mailto:dick.plaman@...]
Sent: Friday, June 10, 2005 2:20 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Estimating with Vantage 6.1


Some of the CAD folks want machinery feeds and speeds .

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of
Frank Zeigafuse
Sent: Friday, June 10, 2005 2:17 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Estimating with Vantage 6.1

Dumb question time for Friday.

Why not use Vantage, I actually think it works pretty well.

What process / industry are you estimating for?

Frank Zeigafuse
Innovative Office Products
General Manager
Direct Phone: 610-559-6369
Email: fzeigafuse@...

Visit www.one.org to see how the world can be changed one person at a
time.



-----Original Message-----
From: PLAMAN DICK [mailto:dick.plaman@...]
Sent: Friday, June 10, 2005 2:13 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Estimating with Vantage 6.1


I know some of you are using Micro Estimating with Vantage and have the
interface. Are there any other packages that interface with vantage?

thanks,


[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links










Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links










Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links










Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
2
I know some of you are using Micro Estimating with Vantage and have the
interface. Are there any other
packages that interface with vantage?

thanks,


[Non-text portions of this message have been removed]
3
Dumb question time for Friday.

Why not use Vantage, I actually think it works pretty well.

What process / industry are you estimating for?

Frank Zeigafuse
Innovative Office Products
General Manager
Direct Phone: 610-559-6369
Email: fzeigafuse@...

Visit www.one.org to see how the world can be changed one person at a time.



-----Original Message-----
From: PLAMAN DICK [mailto:dick.plaman@...]
Sent: Friday, June 10, 2005 2:13 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Estimating with Vantage 6.1


I know some of you are using Micro Estimating with Vantage and have the
interface. Are there any other packages that interface with vantage?

thanks,


[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
4
Some of the CAD folks want machinery feeds and speeds .

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Frank Zeigafuse
Sent: Friday, June 10, 2005 2:17 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Estimating with Vantage 6.1

Dumb question time for Friday.

Why not use Vantage, I actually think it works pretty well.

What process / industry are you estimating for?

Frank Zeigafuse
Innovative Office Products
General Manager
Direct Phone: 610-559-6369
Email: fzeigafuse@...

Visit www.one.org to see how the world can be changed one person at a
time.



-----Original Message-----
From: PLAMAN DICK [mailto:dick.plaman@...]
Sent: Friday, June 10, 2005 2:13 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Estimating with Vantage 6.1


I know some of you are using Micro Estimating with Vantage and have the
interface. Are there any other packages that interface with vantage?

thanks,


[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links










Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
5
Have you tried operation standards?
You might be able to make everyone happy get you run time / setup
information for costing and scheduling and you can have comments. Might
work.

Frank Zeigafuse
Innovative Office Products
General Manager
Direct Phone: 610-559-6369
Email: fzeigafuse@...

Visit www.one.org to see how the world can be changed one person at a time.



-----Original Message-----
From: PLAMAN DICK [mailto:dick.plaman@...]
Sent: Friday, June 10, 2005 2:20 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Estimating with Vantage 6.1


Some of the CAD folks want machinery feeds and speeds .

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Frank Zeigafuse
Sent: Friday, June 10, 2005 2:17 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Estimating with Vantage 6.1

Dumb question time for Friday.

Why not use Vantage, I actually think it works pretty well.

What process / industry are you estimating for?

Frank Zeigafuse
Innovative Office Products
General Manager
Direct Phone: 610-559-6369
Email: fzeigafuse@...

Visit www.one.org to see how the world can be changed one person at a time.



-----Original Message-----
From: PLAMAN DICK [mailto:dick.plaman@...]
Sent: Friday, June 10, 2005 2:13 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Estimating with Vantage 6.1


I know some of you are using Micro Estimating with Vantage and have the
interface. Are there any other packages that interface with vantage?

thanks,


[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links










Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links










Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
6
Since I am looking for the same information....

We also want the software has ability to do quick nesting and display
as well.


--- In vantage@yahoogroups.com, "PLAMAN DICK" <dick.plaman@T...>
wrote:
> Some of the CAD folks want machinery feeds and speeds .
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
Behalf
> Of Frank Zeigafuse
> Sent: Friday, June 10, 2005 2:17 PM
> To: vantage@yahoogroups.com
> Subject: RE: [Vantage] Estimating with Vantage 6.1
>
> Dumb question time for Friday.
>
> Why not use Vantage, I actually think it works pretty well.
>
> What process / industry are you estimating for?
>
> Frank Zeigafuse
> Innovative Office Products
> General Manager
> Direct Phone: 610-559-6369
> Email: fzeigafuse@L...
>
> Visit www.one.org to see how the world can be changed one person at
a
> time.
>
>
>
> -----Original Message-----
> From: PLAMAN DICK [mailto:dick.plaman@T...]
> Sent: Friday, June 10, 2005 2:13 PM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Estimating with Vantage 6.1
>
>
> I know some of you are using Micro Estimating with Vantage and have
the
> interface. Are there any other packages that interface with
vantage?
>
> thanks,
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
> have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder
> and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
> have already linked your email address to a yahoo id to enable
access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder
> and Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links