# Financial Report Designer
**Category:** [Yahoo Archive](https://www.epiusers.help/c/yahoo-archive/9)
**Created:** 2000-07-24 11:31 UTC
**Views:** 3765
**Replies:** 18
**URL:** https://www.epiusers.help/t/financial-report-designer/545
---
## Post #1 by @system
Hello all! We are using Vantage 3.00.628. We have created a report in Finaancial Report Designer like we wanted, except for where the 'Column Type' = Comparative %, the decimal places are 2, we want 1 decimal place. Also, we have to reset the margins and click 'Fit to Page' in the 'Page Setup' each time. Is there a way to save these settings? Any help is appreciated!
Ann Harrell
AMFAB
[Non-text portions of this message have been removed]
---
## Post #2 by @system
Can anyone tell me what the shortcomings of the Financial Report Designer
are? My CFO is not happy with it, but has not really said why. I am just
wondering if someone else can tell me where it is lacking or what might be
difficult with it so that maybe I can help him make better use of it. I was
unaware that along with college I should be taking classes at Madame
Hannah's mind reading school. Any help will be greatly appreciated.
Mark Kohring
Delta Centrifugal Corp.
---
## Post #3 by @system
Hello Mark,
The financial report designer is a very powerful tool however, I have
also had "formatting" difficulties with it.
After you run a report, you will notice you have an option to export
to an excel spreadsheet (among other choices). If you do this, you
can do all the formatting and moving you want within Excel.
Since I did not want to make all the format changes every time, I
setup a template report and then used cell-referencing to "pull in"
the data from the exported statement.
Good luck,
Lewis
--- In vantage@y..., "Mark Kohring" <mkohring@d...> wrote:
> Can anyone tell me what the shortcomings of the Financial Report
Designer
> are? My CFO is not happy with it, but has not really said why. I am
just
> wondering if someone else can tell me where it is lacking or what
might be
> difficult with it so that maybe I can help him make better use of
it. I was
> unaware that along with college I should be taking classes at Madame
> Hannah's mind reading school. Any help will be greatly appreciated.
>
> Mark Kohring
> Delta Centrifugal Corp.
---
## Post #4 by @system
Thanks for the reply. I am currently adding a template to the report wizard
because many of the reports he wants have the same basic format. It is
proving to ba a little more programming than I had hoped it would be. Wish
me luck! Thanks again.
Mark
-----Original Message-----
From:
lvolson@... [mailto:
lvolson@...]
Sent: Friday, June 01, 2001 4:59 PM
To:
vantage@yahoogroups.com
Subject: [Vantage] Re: Financial Report Designer
Hello Mark,
The financial report designer is a very powerful tool however, I have
also had "formatting" difficulties with it.
After you run a report, you will notice you have an option to export
to an excel spreadsheet (among other choices). If you do this, you
can do all the formatting and moving you want within Excel.
Since I did not want to make all the format changes every time, I
setup a template report and then used cell-referencing to "pull in"
the data from the exported statement.
Good luck,
Lewis
--- In vantage@y..., "Mark Kohring" <mkohring@d...> wrote:
> Can anyone tell me what the shortcomings of the Financial Report
Designer
> are? My CFO is not happy with it, but has not really said why. I am
just
> wondering if someone else can tell me where it is lacking or what
might be
> difficult with it so that maybe I can help him make better use of
it. I was
> unaware that along with college I should be taking classes at Madame
> Hannah's mind reading school. Any help will be greatly appreciated.
>
> Mark Kohring
> Delta Centrifugal Corp.
To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have already
linked your email address to a yahoo id to enable access.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
---
## Post #5 by @system
It has become time for me to create our financial report and analysis
reports using the Financial Report Designer. And I am already overwhelmed.
Does anyone have any advice on where to start? I used the Report Wizard and
those reports seem to be harder to work with than starting from scratch. Are
there any possibilities to copy from one person to the next. How do you get
financial reports out of the Vantage?
Any help would be greatly appreciated.
Lori Baker
Accountant/IS Manager
Cardio Pak, Inc.
[Non-text portions of this message have been removed]
---
## Post #6 by @system
Lori,
I had a situation recently where our less-than-complete implementation of
the financial side of Vantage finally blew up in my face. A consultant came
in, said Vantage wasn't up to much, MD threatened to throw it, so I wrote
some reports!
I looked at the Financial Report designer, but felt I could do the job in
Crystal rather quicker.
What reports are you needing?
I have got the following coming straight out of Vantage via Crystal:-
1 - Trial Balance
2 - Extended Trial Balance
3 - Profit & Loss Accounts
4 - Monthly Profit & Loss Accounts
5 - Balance Sheet
Coming Soon:-
1 - Monthly Balance Sheet
2 - Extended Trial Balance (based on Account Categories rather than
individual Accounts)
All will probably require a little tinkering to adjust to your Company's
preferred presentation, especially the Balance Sheets and Profit & Losses,
as these sort data on the Vantage Account Category ID (simple change) but
also have some fairly complex calculations to calculate Gross, Operating and
Net Profit which aren't controlled from Account Categories (perhaps they
should be!).
If you're interested in these reports, or anyone else for that matter,
e-mail me at
it@... and I will upload the reports to
YahooGroups.
Anton Wilson,
Systems Analyst,
Deanestor Ltd
---------------------------------------------------
Message: 10
Date: Thu, 28 Jun 2001 09:13:48 -0600
From: "Lori Baker" <
lori_baker@...>
Subject: Financial Report Designer
It has become time for me to create our financial report and analysis
reports using the Financial Report Designer. And I am already overwhelmed.
Does anyone have any advice on where to start? I used the Report Wizard and
those reports seem to be harder to work with than starting from scratch. Are
there any possibilities to copy from one person to the next. How do you get
financial reports out of the Vantage?
Any help would be greatly appreciated.
Lori Baker
Accountant/IS Manager
Cardio Pak, Inc.
---
## Post #7 by @system
I would love to take a look at the reports, Anton. Our Controller is always asking me for reports that I have no idea what he's talking about.
Troy Funte
Liberty Electronics
----- Original Message -----
From: it@...
To: Vantage Mailing List
Sent: Friday, June 29, 2001 5:29 AM
Subject: [Vantage] re: Financial Report Designer
Lori,
I had a situation recently where our less-than-complete implementation of
the financial side of Vantage finally blew up in my face. A consultant came
in, said Vantage wasn't up to much, MD threatened to throw it, so I wrote
some reports!
I looked at the Financial Report designer, but felt I could do the job in
Crystal rather quicker.
What reports are you needing?
I have got the following coming straight out of Vantage via Crystal:-
1 - Trial Balance
2 - Extended Trial Balance
3 - Profit & Loss Accounts
4 - Monthly Profit & Loss Accounts
5 - Balance Sheet
Coming Soon:-
1 - Monthly Balance Sheet
2 - Extended Trial Balance (based on Account Categories rather than
individual Accounts)
All will probably require a little tinkering to adjust to your Company's
preferred presentation, especially the Balance Sheets and Profit & Losses,
as these sort data on the Vantage Account Category ID (simple change) but
also have some fairly complex calculations to calculate Gross, Operating and
Net Profit which aren't controlled from Account Categories (perhaps they
should be!).
If you're interested in these reports, or anyone else for that matter,
e-mail me at it@... and I will upload the reports to
YahooGroups.
Anton Wilson,
Systems Analyst,
Deanestor Ltd
---------------------------------------------------
Message: 10
Date: Thu, 28 Jun 2001 09:13:48 -0600
From: "Lori Baker" <lori_baker@...>
Subject: Financial Report Designer
It has become time for me to create our financial report and analysis
reports using the Financial Report Designer. And I am already overwhelmed.
Does anyone have any advice on where to start? I used the Report Wizard and
those reports seem to be harder to work with than starting from scratch. Are
there any possibilities to copy from one person to the next. How do you get
financial reports out of the Vantage?
Any help would be greatly appreciated.
Lori Baker
Accountant/IS Manager
Cardio Pak, Inc.
To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please go to: http://groups.yahoo.com/group/vantage/files/. Note: You must have already linked your email address to a yahoo id to enable access.
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
---
## Post #8 by @system
Sorry, everyone. I meant to email Anton directly, but forgot to past his email instead of egroups.
(Don't want to get a 'ditto' thread going, you know).
Troy Funte
----- Original Message -----
From: Troy Funte
To: vantage@yahoogroups.com
Sent: Friday, June 29, 2001 7:15 AM
Subject: Re: [Vantage] re: Financial Report Designer
I would love to take a look at the reports, Anton. Our Controller is always asking me for reports that I have no idea what he's talking about.
Troy Funte
Liberty Electronics
----- Original Message -----
From: it@...
To: Vantage Mailing List
Sent: Friday, June 29, 2001 5:29 AM
Subject: [Vantage] re: Financial Report Designer
Lori,
I had a situation recently where our less-than-complete implementation of
the financial side of Vantage finally blew up in my face. A consultant came
in, said Vantage wasn't up to much, MD threatened to throw it, so I wrote
some reports!
I looked at the Financial Report designer, but felt I could do the job in
Crystal rather quicker.
What reports are you needing?
I have got the following coming straight out of Vantage via Crystal:-
1 - Trial Balance
2 - Extended Trial Balance
3 - Profit & Loss Accounts
4 - Monthly Profit & Loss Accounts
5 - Balance Sheet
Coming Soon:-
1 - Monthly Balance Sheet
2 - Extended Trial Balance (based on Account Categories rather than
individual Accounts)
All will probably require a little tinkering to adjust to your Company's
preferred presentation, especially the Balance Sheets and Profit & Losses,
as these sort data on the Vantage Account Category ID (simple change) but
also have some fairly complex calculations to calculate Gross, Operating and
Net Profit which aren't controlled from Account Categories (perhaps they
should be!).
If you're interested in these reports, or anyone else for that matter,
e-mail me at it@... and I will upload the reports to
YahooGroups.
Anton Wilson,
Systems Analyst,
Deanestor Ltd
---------------------------------------------------
Message: 10
Date: Thu, 28 Jun 2001 09:13:48 -0600
From: "Lori Baker" <lori_baker@...>
Subject: Financial Report Designer
It has become time for me to create our financial report and analysis
reports using the Financial Report Designer. And I am already overwhelmed.
Does anyone have any advice on where to start? I used the Report Wizard and
those reports seem to be harder to work with than starting from scratch. Are
there any possibilities to copy from one person to the next. How do you get
financial reports out of the Vantage?
Any help would be greatly appreciated.
Lori Baker
Accountant/IS Manager
Cardio Pak, Inc.
To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please go to: http://groups.yahoo.com/group/vantage/files/. Note: You must have already linked your email address to a yahoo id to enable access.
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please go to: http://groups.yahoo.com/group/vantage/files/. Note: You must have already linked your email address to a yahoo id to enable access.
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
---
## Post #9 by @system
Many problems are caused by how the account #'s are set up originally. I am
a controller and use the financial report writer in conjunction with
export's to fill my needs.
-----Original Message-----
From: Troy Funte [SMTP:
tfunte@...]
Sent: Friday, June 29, 2001 6:22 AM
To:
vantage@yahoogroups.com
Subject: Re: [Vantage] re: Financial Report Designer
Sorry, everyone. I meant to email Anton directly, but forgot to past his
email instead of egroups.
(Don't want to get a 'ditto' thread going, you know).
Troy Funte
----- Original Message -----
From: Troy Funte
To: vantage@yahoogroups.com
Sent: Friday, June 29, 2001 7:15 AM
Subject: Re: [Vantage] re: Financial Report Designer
I would love to take a look at the reports, Anton. Our Controller is
always asking me for reports that I have no idea what he's talking about.
Troy Funte
Liberty Electronics
----- Original Message -----
From: it@...
To: Vantage Mailing List
Sent: Friday, June 29, 2001 5:29 AM
Subject: [Vantage] re: Financial Report Designer
Lori,
I had a situation recently where our less-than-complete implementation
of
the financial side of Vantage finally blew up in my face. A consultant
came
in, said Vantage wasn't up to much, MD threatened to throw it, so I
wrote
some reports!
I looked at the Financial Report designer, but felt I could do the job
in
Crystal rather quicker.
What reports are you needing?
I have got the following coming straight out of Vantage via Crystal:-
1 - Trial Balance
2 - Extended Trial Balance
3 - Profit & Loss Accounts
4 - Monthly Profit & Loss Accounts
5 - Balance Sheet
Coming Soon:-
1 - Monthly Balance Sheet
2 - Extended Trial Balance (based on Account Categories rather than
individual Accounts)
All will probably require a little tinkering to adjust to your
Company's
preferred presentation, especially the Balance Sheets and Profit &
Losses,
as these sort data on the Vantage Account Category ID (simple change)
but
also have some fairly complex calculations to calculate Gross,
Operating and
Net Profit which aren't controlled from Account Categories (perhaps
they
should be!).
If you're interested in these reports, or anyone else for that matter,
e-mail me at it@... and I will upload the reports to
YahooGroups.
Anton Wilson,
Systems Analyst,
Deanestor Ltd
---------------------------------------------------
Message: 10
Date: Thu, 28 Jun 2001 09:13:48 -0600
From: "Lori Baker" <lori_baker@...>
Subject: Financial Report Designer
It has become time for me to create our financial report and analysis
reports using the Financial Report Designer. And I am already
overwhelmed.
Does anyone have any advice on where to start? I used the Report Wizard
and
those reports seem to be harder to work with than starting from
scratch. Are
there any possibilities to copy from one person to the next. How do you
get
financial reports out of the Vantage?
Any help would be greatly appreciated.
Lori Baker
Accountant/IS Manager
Cardio Pak, Inc.
To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have already
linked your email address to a yahoo id to enable access.
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have already
linked your email address to a yahoo id to enable access.
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have already
linked your email address to a yahoo id to enable access.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
---
## Post #10 by @system
We have a new accountant who is having some trouble with the Financial
Report Designer. It is not pulling in anything for % of Sales. The balances
that it is pulling in are incorrect. I only know what I have figured out
from the help files on this. I would like to put her in touch either by
e-mail or phone with someone who knows Financial Report Designer pretty
well. Any volunteers??? You can contact me off list. Thanks in advance.
Mark Kohring
Delta Centrifugal Corp.
MKohring@...
[Non-text portions of this message have been removed]
---
## Post #11 by @system
I believe somebody posted a file that assisted in using the financial report
designer. I would greatly appreciate getting access to that file(s)
Regards
Dennis O'Hara
Finance Controller
The Signcraft Group
Tel 61 3 9687 8455
Fax 61 3 9687 7235
e-mail
d.ohara@... <mailto:
d.ohara@...>
---
## Post #12 by @system
I think this is the document you are looking for.
Cameron A. Janish
Misha1
866-464-7421
cameron@...
-----Original Message-----
From: Dennis O'Hara [mailto:
d.ohara@...]
Sent: Tuesday, August 28, 2001 10:40 PM
To: '
vantage@egroups.com'
Subject: [Vantage] Financial Report Designer
I believe somebody posted a file that assisted in using the financial
report
designer. I would greatly appreciate getting access to that file(s)
Regards
Dennis O'Hara
Finance Controller
The Signcraft Group
Tel 61 3 9687 8455
Fax 61 3 9687 7235
e-mail
d.ohara@... <mailto:
d.ohara@...>
Yahoo! Groups Sponsor
ADVERTISEMENT
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
---
## Post #13 by @system
I believe one of the list moderators scanned the document I sent him and put
it on the yahoogroups file. Let me know if you can't find it and I can fax
it to you.
Nora Story
Spectra Technologies, Inc.
817-540-4475, ext 105
Nora_Story@...
> -----Original Message-----
> From: Dennis O'Hara [mailto:d.ohara@...]
> Sent: Wednesday, August 29, 2001 12:40 AM
> To: 'vantage@egroups.com'
> Subject: [Vantage] Financial Report Designer
>
>
> I believe somebody posted a file that assisted in using the
> financial report
> designer. I would greatly appreciate getting access to that file(s)
> Regards
>
> Dennis O'Hara
> Finance Controller
> The Signcraft Group
>
> Tel 61 3 9687 8455
> Fax 61 3 9687 7235
> e-mail d.ohara@... <mailto:d.ohara@...>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
> must have already linked your email address to a yahoo id to
> enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report
> Builder and Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search
> through old msg's goto: http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
>
> Your use of Yahoo!
> Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
---
## Post #14 by @system
Currently we have a good report which we designed using the
'Financial Report Designer'
We want the same report with a minor variation.
Is there a way to duplicate the first report?
BW
=============================================
Babette Welch
MIS Director
Argonics
1110 Wright
Marquette MI 49855
906.226.9747 ext 235
906.228.0951 fax
---
## Post #15 by @system
Yes - there is a Report > Duplicate menu option. I'm not sure on what
version this option became available.
Jerry Boyle
Sipco Molding Technologies
Meadville, Pa. 16335-6725
814.724.2243
Visit our web site at www.sipco.com
Vantage 5.00.334
-----Original Message-----
From: Babette Welch [mailto:
bwelch@...]
Sent: Tuesday, December 18, 2001 8:35 AM
To:
vantage@yahoogroups.com
Subject: [Vantage] Financial Report Designer
Currently we have a good report which we designed using the
'Financial Report Designer'
We want the same report with a minor variation.
Is there a way to duplicate the first report?
---
## Post #16 by @system
Go to FRD and highlight the report you wish to duplicate, click report on
menu, then duplicate. You will then be presented with a dialog box that
requests that you assign a new report ID and change description and report
title if you wish.
-----Original Message-----
From: Babette Welch [mailto:
bwelch@...]
Sent: Tuesday, December 18, 2001 8:35 AM
To:
vantage@yahoogroups.com
Subject: [Vantage] Financial Report Designer
Currently we have a good report which we designed using the
'Financial Report Designer'
We want the same report with a minor variation.
Is there a way to duplicate the first report?
BW
=============================================
Babette Welch
MIS Director
Argonics
1110 Wright
Marquette MI 49855
906.226.9747 ext 235
906.228.0951 fax
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
---
## Post #17 by @system
This is only available on version 5.00 and higher.
-----Original Message-----
From: Mike Daniel [mailto:
m_daniel@...]
Sent: Tuesday, December 18, 2001 8:46 AM
To:
vantage@yahoogroups.com
Subject: RE: [Vantage] Financial Report Designer
Go to FRD and highlight the report you wish to duplicate, click report on
menu, then duplicate. You will then be presented with a dialog box that
requests that you assign a new report ID and change description and report
title if you wish.
-----Original Message-----
From: Babette Welch [mailto:
bwelch@...]
Sent: Tuesday, December 18, 2001 8:35 AM
To:
vantage@yahoogroups.com
Subject: [Vantage] Financial Report Designer
Currently we have a good report which we designed using the
'Financial Report Designer'
We want the same report with a minor variation.
Is there a way to duplicate the first report?
BW
=============================================
Babette Welch
MIS Director
Argonics
1110 Wright
Marquette MI 49855
906.226.9747 ext 235
906.228.0951 fax
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
---
## Post #18 by @system
My apologies! I have been using 5.0 so long I can't remember the
predecessor.
-----Original Message-----
From: Joanne Yargeau [mailto:
jyargeau@...]
Sent: Tuesday, December 18, 2001 8:49 AM
To: '
vantage@yahoogroups.com'
Subject: RE: [Vantage] Financial Report Designer
This is only available on version 5.00 and higher.
-----Original Message-----
From: Mike Daniel [mailto:
m_daniel@...]
Sent: Tuesday, December 18, 2001 8:46 AM
To:
vantage@yahoogroups.com
Subject: RE: [Vantage] Financial Report Designer
Go to FRD and highlight the report you wish to duplicate, click report on
menu, then duplicate. You will then be presented with a dialog box that
requests that you assign a new report ID and change description and report
title if you wish.
-----Original Message-----
From: Babette Welch [mailto:
bwelch@...]
Sent: Tuesday, December 18, 2001 8:35 AM
To:
vantage@yahoogroups.com
Subject: [Vantage] Financial Report Designer
Currently we have a good report which we designed using the
'Financial Report Designer'
We want the same report with a minor variation.
Is there a way to duplicate the first report?
BW
=============================================
Babette Welch
MIS Director
Argonics
1110 Wright
Marquette MI 49855
906.226.9747 ext 235
906.228.0951 fax
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
---
## Post #19 by @system
Does anyone no of a way besides manually to resequence Financial Reports
similar to Operations and Materials?
Thanks,
Michael Benedict
IS Manager
Crestview Aerospace Corp.
[Non-text portions of this message have been removed]
---
**Canonical:** https://www.epiusers.help/t/financial-report-designer/545
**Original content:** https://www.epiusers.help/t/financial-report-designer/545