Global Alerts are sent after updates

system · September 19, 2008, 10:44am

Not sure if this is the same in 8.x but in 6.10 there is a process server that has to run on the Vantage server to make the notices and logging run. Every time I reboot the server I need to remember to restart it (and often forget). Perhaps there is something similar in 8.x?
-Todd C.

________________________________
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of ofcwiz
Sent: Friday, September 19, 2008 9:24 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: Global Alerts are sent after updates

Kersten,

I have repeatedly checked the Global Alert error log and found
nothing. There also used to be an error dialog box when they dropped
into the Global Alert error log. I haven't seen that message for some
time. The question still remains why they stop working from time to
time. They are piling up somewhere, or they wouldn't be there to dump
when an update occurs.

Our 'New PO Suggestions' process has not functioned since 404A. It
errors out when run. Epicor support has been working on it since
6/18/08. Nothing yet. I have been wondering if these might be related.

Anybody else see the global alerts show up after an update??

Dave
Xybix

--- In vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>, "Kersten MacLennan" <kmaclennan@...>
wrote:

>
> Are you seeing anything in the error log? Mine stop working from time to
> time and I end up stopping and restarting the task manager and process
> server. If the messages are showing up in the error log they can be
> resent from there
>
>
> Kersten MacLennan
> IT/ERP Analyst
> Semrock, Inc.
> 3625 Buffalo Rd.,
> Suite 6
> Rochester, NY 14624
> 585-594-7009
> 585-594-7095 fax
>
> kmaclennan@...
>
> The Standard in Optical Filters for Biotech & Analytical Instrumentation
>
>
> Hundreds of Thousands of Ion Beam Sputtered filters delivered -
> extensive inventory now!
>
> The information contained in this message and any attachments may be
> privileged, confidential, and protected from disclosure. If the reader
> of this message is not the intended recipient, or any agent responsible
> for delivering this message to the intended recipient, you are hereby
> notified that any dissemination, distribution, or copying of this
> communication may be unlawful and therefore strictly prohibited. If you
> received this message in error, please reply to the message and delete
> it. Thank you
>
>
>
>
> ________________________________
>
> From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf
> Of ofcwiz
> Sent: Thursday, September 18, 2008 1:06 PM
> To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
> Subject: [Vantage] Global Alerts are sent after updates
>
>
>
> I have setup several Global Alerts via email. For the last four
> updates (both Openedge and 8.03.405), after the update is completed,
> our inboxs are filled with the global alert messages we should have
> been receiving all along. Any idea what we are doing wrong?
>
> Thanks,
> Dave Hoy
> Xybix
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

[Non-text portions of this message have been removed]

system · September 18, 2008, 1:05pm

I have setup several Global Alerts via email. For the last four
updates (both Openedge and 8.03.405), after the update is completed,
our inboxs are filled with the global alert messages we should have
been receiving all along. Any idea what we are doing wrong?

Thanks,
Dave Hoy
Xybix

system · September 18, 2008, 3:23pm

Funny, but we're experiencing the same issues as well here - we're at
8.03.404B.

Sure wish we could see them queued up and get them coming out as
they're expected rather than only when an update is performed (and then
they quit working soon after the batch has been sent).

--- In vantage@yahoogroups.com, "ofcwiz" <DavidH@...> wrote:
>
> I have setup several Global Alerts via email. For the last four
> updates (both Openedge and 8.03.405), after the update is completed,
> our inboxs are filled with the global alert messages we should have
> been receiving all along. Any idea what we are doing wrong?
>
> Thanks,
> Dave Hoy
> Xybix
>

system · September 18, 2008, 3:32pm

Are you seeing anything in the error log? Mine stop working from time to
time and I end up stopping and restarting the task manager and process
server. If the messages are showing up in the error log they can be
resent from there

Kersten MacLennan
IT/ERP Analyst
Semrock, Inc.
3625 Buffalo Rd.,
Suite 6
Rochester, NY 14624
585-594-7009
585-594-7095 fax

kmaclennan@...

The Standard in Optical Filters for Biotech & Analytical Instrumentation

Hundreds of Thousands of Ion Beam Sputtered filters delivered -
extensive inventory now!

The information contained in this message and any attachments may be
privileged, confidential, and protected from disclosure. If the reader
of this message is not the intended recipient, or any agent responsible
for delivering this message to the intended recipient, you are hereby
notified that any dissemination, distribution, or copying of this
communication may be unlawful and therefore strictly prohibited. If you
received this message in error, please reply to the message and delete
it. Thank you

________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of ofcwiz
Sent: Thursday, September 18, 2008 1:06 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Global Alerts are sent after updates

I have setup several Global Alerts via email. For the last four
updates (both Openedge and 8.03.405), after the update is completed,
our inboxs are filled with the global alert messages we should have
been receiving all along. Any idea what we are doing wrong?

Thanks,
Dave Hoy
Xybix

[Non-text portions of this message have been removed]

system · September 19, 2008, 10:23am

Kersten,

I have repeatedly checked the Global Alert error log and found
nothing. There also used to be an error dialog box when they dropped
into the Global Alert error log. I haven't seen that message for some
time. The question still remains why they stop working from time to
time. They are piling up somewhere, or they wouldn't be there to dump
when an update occurs.

Our 'New PO Suggestions' process has not functioned since 404A. It
errors out when run. Epicor support has been working on it since
6/18/08. Nothing yet. I have been wondering if these might be related.

Anybody else see the global alerts show up after an update??

Dave
Xybix

--- In vantage@yahoogroups.com, "Kersten MacLennan" <kmaclennan@...>
wrote:

>
> Are you seeing anything in the error log? Mine stop working from time to
> time and I end up stopping and restarting the task manager and process
> server. If the messages are showing up in the error log they can be
> resent from there
>
>
> Kersten MacLennan
> IT/ERP Analyst
> Semrock, Inc.
> 3625 Buffalo Rd.,
> Suite 6
> Rochester, NY 14624
> 585-594-7009
> 585-594-7095 fax
>
> kmaclennan@...
>
> The Standard in Optical Filters for Biotech & Analytical Instrumentation
>
>
> Hundreds of Thousands of Ion Beam Sputtered filters delivered -
> extensive inventory now!
>
> The information contained in this message and any attachments may be
> privileged, confidential, and protected from disclosure. If the reader
> of this message is not the intended recipient, or any agent responsible
> for delivering this message to the intended recipient, you are hereby
> notified that any dissemination, distribution, or copying of this
> communication may be unlawful and therefore strictly prohibited. If you
> received this message in error, please reply to the message and delete
> it. Thank you
>
>
>
>
> ________________________________
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
> Of ofcwiz
> Sent: Thursday, September 18, 2008 1:06 PM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Global Alerts are sent after updates
>
>
>
> I have setup several Global Alerts via email. For the last four
> updates (both Openedge and 8.03.405), after the update is completed,
> our inboxs are filled with the global alert messages we should have
> been receiving all along. Any idea what we are doing wrong?
>
> Thanks,
> Dave Hoy
> Xybix
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>