You can also turn off "Broadcast" in the TCP/IP settings for the network card on the Win95 PC's. This polls the network and can cause major system slowdowns
Regards,
David Sloan
IT Manager
Entech Integrated Technologies

----- Original Message -----
From: Tim Care
To: vantage@yahoogroups.com
Sent: Friday, May 11, 2001 3:19 AM
Subject: Re: [Vantage] If you're going to ver 5....

Try changing your network card to 10MBPS/Half Duplex. We
found that we had some cards that did not play well together with
our switch (Autonegotiating). Hard setting the card speed cleared
up the problem on machines we were having problems with.

Tim Care
Electro Chemical Finishing
----- Original Message -----
From: "Greg Gillette" <ggillette@...>
To: <vantage@yahoogroups.com>
Sent: Thursday, May 10, 2001 12:33 PM
Subject: RE: [Vantage] If you're going to ver 5....

> Unfortunately that did not resolve my problem of a very very slow log on
to
> the new server. A clean machine connects no problem, all going through
the
> same hardware.
>
> Greg
>
> -----Original Message-----
> From: Britt Moelling [mailto:bmoelling@...]
> Sent: Thursday, May 10, 2001 12:08 PM
> To: vantage@yahoogroups.com
> Subject: Re: [Vantage] If you're going to ver 5....
>
>
> I removed every reference which included "epicor". You do not need
> anything on the old path. I just removed the "default" key (on the right
> side) only.
>
> I had probably 10-15 references on each workstation.
>
> I would however backup the registry first.
>
> Britt Moelling
>
>
> Greg Gillette wrote:
>
> > In regards to removing the registry entries..
> > I did an uninstall of my progress client..
> > I ran an UNREGOCX file from Vantage Support..
> > I do a search of epicor and the first one I come across for example
> > is..
> >
> >
> > H
> >
EY_CLASSES_ROOT\TypeLib\{3AA8042B-DF1C-11D3-B240-0004AC5B140B}\1.0\0\win32
> >
> >
> >
> > Default \\poweredge\epicor\vantage\dll\progress IPC.OCX
> >
> > Would that be one to remove? And everyone I come across as well?
> > There
> > seems to be a lot of these.
> >
> > -----Original Message-----
> > From: Britt Moelling [mailto:bmoelling@...]
> > Sent: Thursday, May 10, 2001 10:49 AM
> > To: vantage@yahoogroups.com
> > Subject: Re: [Vantage] If you're going to ver 5....
> >
> >
> > Thad
> > The problem is that I did remove the progress client first, but the
> > uninstall doesn't remove all the registry entries.
> > For ver 3, I think the "share" dir was "dwc"
> > Ver 4 used "epicor" as the share dir.
> >
> >
> > Thad Jacobs wrote:
> >
> > > It may be more practical to remove the old 3.0 client and progress
> > 8.3
> > >
> > > install first, before upgrading, so you don't have to sort between
> > > versions
> > > in the registry.
> > >
> > > On my version 3 client install, there is no reference to "epicor",
> > so
> > > searching for "vantage" in REGEDIT would be better. MAKE SURE TO
> > MAKE
> > > A
> > > BACKUP OF THE REGISTRY before going through and deleting all the
> > > "Vantage"
> > > keys. There is no undo in REGEDIT.
> > >
> > >
> > > -----Original Message-----
> > > From: Troy Funte [mailto:tfunte@...]
> > > Sent: Wednesday, May 09, 2001 2:11 PM
> > > To: vantage@yahoogroups.com
> > > Subject: Re: [Vantage] If you're going to ver 5....
> > >
> > >
> > > Britt,
> > > Would you say the same thing goes for Vantage 3 and 5 being on
> > the
> > > same
> > > machines? We can't help but do that right now as we are testing,
> > but
> > > I
> > > would love to know any details about removing every trace of 3.0
> > (and
> > > progress 8.3) off our workstations after the migration to 5.0.
> > >
> > > Troy
> > >
> > > ----- Original Message -----
> > > From: Britt Moelling
> > > To: vantage@yahoogroups.com
> > > Sent: Wednesday, May 09, 2001 2:13 PM
> > > Subject: [Vantage] If you're going to ver 5....
> > >
> > >
> > > If you're going to ver 5, be sure and do the following:
> > > .
> > > 1. Do a database analysis FIRST, and if your "scatter factor"
> > is
> > > too
> > > high, do a "dump-and-load". Epicor does NOT have a
> > "dump-and-load"
> > > for
> > > ver 5 ready yet!
> > > ( I wish I had known this BEFORE we went to ver 5)
> > >
> > > 2. Un-install Progress 9.0 from every workstation. Then go
> > > into"
> > > regedit", and delete all references to the "epicor" directory.
> > >
> > > 3. Clear out the vntgwork directories
> > >
> > > 4. Reboot and install Progress 9.1A & Vantage
> > >
> > > .... and don't put both Vantage 4 & 5 on the same
> > > workstation!!!!!!!!!!!! I tried, and had to Norton's CleanSweep
> > to
> > > remove both of them!
> > >
> > >
> > > --
> > > Britt Moelling
> > > M&M Manufacturing Co.
> > >
> > >
> > >
> > > Yahoo! Groups Sponsor
> > >
> > >
> > >snip<

[Non-text portions of this message have been removed]

Britt,
Would you say the same thing goes for Vantage 3 and 5 being on the same machines? We can't help but do that right now as we are testing, but I would love to know any details about removing every trace of 3.0 (and progress 8.3) off our workstations after the migration to 5.0.

Troy

----- Original Message -----
From: Britt Moelling
To: vantage@yahoogroups.com
Sent: Wednesday, May 09, 2001 2:13 PM
Subject: [Vantage] If you're going to ver 5....

If you're going to ver 5, be sure and do the following:
.
1. Do a database analysis FIRST, and if your "scatter factor" is too
high, do a "dump-and-load". Epicor does NOT have a "dump-and-load" for
ver 5 ready yet!
( I wish I had known this BEFORE we went to ver 5)

2. Un-install Progress 9.0 from every workstation. Then go into"
regedit", and delete all references to the "epicor" directory.

3. Clear out the vntgwork directories

4. Reboot and install Progress 9.1A & Vantage

.... and don't put both Vantage 4 & 5 on the same
workstation!!!!!!!!!!!! I tried, and had to Norton's CleanSweep to
remove both of them!

--
Britt Moelling
M&M Manufacturing Co.

Yahoo! Groups Sponsor

To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please go to: http://groups.yahoo.com/group/vantage/files/. Note: You must have already linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]

Databases tend to get fragmented (just like your hard drive), and when records get deleted, the database doesn't recover the empty space. A Dump-and-load, which Epicor can help you walk through, can save space and increase performance.

Our 500MB 3.0 database went down to 280MB after a dump and load yesterday. (We had converted it to 4.0 first, then deleted labor records older than one year, then did the dump and load.).

I'm very glad we did it. Epicor designed a custom DL kit so that the load would include some custom tables that we had designed for Data Collection in 3.0.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Hiatt Manufacturing, Inc.
To: vantage@yahoogroups.com
Sent: Wednesday, May 09, 2001 3:46 PM
Subject: Re: [Vantage] If you're going to ver 5....

Britt,

Thanks for the pointers. What exactly do you mean by "scatter factor" and "dump-and-load"? Are these things for only people with Provision?

Thanks

John Mueske
IS Manager
Hiatt Manufacturing, Inc.
SBS 4.5 - Vantage 3.00.632

----- Original Message -----
From: Britt Moelling
To: vantage@yahoogroups.com
Sent: Wednesday, May 09, 2001 1:13 PM
Subject: [Vantage] If you're going to ver 5....

If you're going to ver 5, be sure and do the following:
.
1. Do a database analysis FIRST, and if your "scatter factor" is too
high, do a "dump-and-load". Epicor does NOT have a "dump-and-load" for
ver 5 ready yet!
( I wish I had known this BEFORE we went to ver 5)

[Non-text portions of this message have been removed]

To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please go to: http://groups.yahoo.com/group/vantage/files/. Note: You must have already linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]

It may be more practical to remove the old 3.0 client and progress 8.3
install first, before upgrading, so you don't have to sort between versions
in the registry.

On my version 3 client install, there is no reference to "epicor", so
searching for "vantage" in REGEDIT would be better. MAKE SURE TO MAKE A
BACKUP OF THE REGISTRY before going through and deleting all the "Vantage"
keys. There is no undo in REGEDIT.

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Wednesday, May 09, 2001 2:11 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] If you're going to ver 5....

Britt,
Would you say the same thing goes for Vantage 3 and 5 being on the same
machines? We can't help but do that right now as we are testing, but I
would love to know any details about removing every trace of 3.0 (and
progress 8.3) off our workstations after the migration to 5.0.

Troy

----- Original Message -----
From: Britt Moelling
To: vantage@yahoogroups.com
Sent: Wednesday, May 09, 2001 2:13 PM
Subject: [Vantage] If you're going to ver 5....

If you're going to ver 5, be sure and do the following:
.
1. Do a database analysis FIRST, and if your "scatter factor" is too
high, do a "dump-and-load". Epicor does NOT have a "dump-and-load" for
ver 5 ready yet!
( I wish I had known this BEFORE we went to ver 5)

2. Un-install Progress 9.0 from every workstation. Then go into"
regedit", and delete all references to the "epicor" directory.

3. Clear out the vntgwork directories

4. Reboot and install Progress 9.1A & Vantage

.... and don't put both Vantage 4 & 5 on the same
workstation!!!!!!!!!!!! I tried, and had to Norton's CleanSweep to
remove both of them!

--
Britt Moelling
M&M Manufacturing Co.

Yahoo! Groups Sponsor

To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have already
linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]

To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have already
linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Thad
The problem is that I did remove the progress client first, but the
uninstall doesn't remove all the registry entries.
For ver 3, I think the "share" dir was "dwc"
Ver 4 used "epicor" as the share dir.

Thad Jacobs wrote:

> It may be more practical to remove the old 3.0 client and progress 8.3
>
> install first, before upgrading, so you don't have to sort between
> versions
> in the registry.
>
> On my version 3 client install, there is no reference to "epicor", so
> searching for "vantage" in REGEDIT would be better. MAKE SURE TO MAKE
> A
> BACKUP OF THE REGISTRY before going through and deleting all the
> "Vantage"
> keys. There is no undo in REGEDIT.
>
>
> -----Original Message-----
> From: Troy Funte [mailto:tfunte@...]
> Sent: Wednesday, May 09, 2001 2:11 PM
> To: vantage@yahoogroups.com
> Subject: Re: [Vantage] If you're going to ver 5....
>
>
> Britt,
> Would you say the same thing goes for Vantage 3 and 5 being on the
> same
> machines? We can't help but do that right now as we are testing, but
> I
> would love to know any details about removing every trace of 3.0 (and
> progress 8.3) off our workstations after the migration to 5.0.
>
> Troy
>
> ----- Original Message -----
> From: Britt Moelling
> To: vantage@yahoogroups.com
> Sent: Wednesday, May 09, 2001 2:13 PM
> Subject: [Vantage] If you're going to ver 5....
>
>
> If you're going to ver 5, be sure and do the following:
> .
> 1. Do a database analysis FIRST, and if your "scatter factor" is
> too
> high, do a "dump-and-load". Epicor does NOT have a "dump-and-load"
> for
> ver 5 ready yet!
> ( I wish I had known this BEFORE we went to ver 5)
>
> 2. Un-install Progress 9.0 from every workstation. Then go
> into"
> regedit", and delete all references to the "epicor" directory.
>
> 3. Clear out the vntgwork directories
>
> 4. Reboot and install Progress 9.1A & Vantage
>
> .... and don't put both Vantage 4 & 5 on the same
> workstation!!!!!!!!!!!! I tried, and had to Norton's CleanSweep to
> remove both of them!
>
>
> --
> Britt Moelling
> M&M Manufacturing Co.
>
>
>
> Yahoo! Groups Sponsor
>
>
>
> To access the Files Section of our Yahoo!Group for Report Builder
> and
> Crystal Reports and other 'goodies', please go to:
> http://groups.yahoo.com/group/vantage/files/. Note: You must have
> already
> linked your email address to a yahoo id to enable access.
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
> To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please go to:
> http://groups.yahoo.com/group/vantage/files/. Note: You must have
> already
> linked your email address to a yahoo id to enable access.
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
> Yahoo! Groups Sponsor

[www.debticated.com]

>
> To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please go to:
> http://groups.yahoo.com/group/vantage/files/. Note: You must have
> already linked your email address to a yahoo id to enable access.
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

--
Britt Moelling
M&M Manufacturing Co.

[Non-text portions of this message have been removed]

In regards to removing the registry entries..
I did an uninstall of my progress client..
I ran an UNREGOCX file from Vantage Support..
I do a search of epicor and the first one I come across for example is..

HKEY_CLASSES_ROOT\TypeLib\{3AA8042B-DF1C-11D3-B240-0004AC5B140B}\1.0\0\win32

Default \\poweredge\epicor\vantage\dll\progress IPC.OCX

Would that be one to remove? And everyone I come across as well? There
seems to be a lot of these.

-----Original Message-----
From: Britt Moelling [mailto:bmoelling@...]
Sent: Thursday, May 10, 2001 10:49 AM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] If you're going to ver 5....

Thad
The problem is that I did remove the progress client first, but the
uninstall doesn't remove all the registry entries.
For ver 3, I think the "share" dir was "dwc"
Ver 4 used "epicor" as the share dir.

Thad Jacobs wrote:

> It may be more practical to remove the old 3.0 client and progress 8.3
>
> install first, before upgrading, so you don't have to sort between
> versions
> in the registry.
>
> On my version 3 client install, there is no reference to "epicor", so
> searching for "vantage" in REGEDIT would be better. MAKE SURE TO MAKE
> A
> BACKUP OF THE REGISTRY before going through and deleting all the
> "Vantage"
> keys. There is no undo in REGEDIT.
>
>
> -----Original Message-----
> From: Troy Funte [mailto:tfunte@...]
> Sent: Wednesday, May 09, 2001 2:11 PM
> To: vantage@yahoogroups.com
> Subject: Re: [Vantage] If you're going to ver 5....
>
>
> Britt,
> Would you say the same thing goes for Vantage 3 and 5 being on the
> same
> machines? We can't help but do that right now as we are testing, but
> I
> would love to know any details about removing every trace of 3.0 (and
> progress 8.3) off our workstations after the migration to 5.0.
>
> Troy
>
> ----- Original Message -----
> From: Britt Moelling
> To: vantage@yahoogroups.com
> Sent: Wednesday, May 09, 2001 2:13 PM
> Subject: [Vantage] If you're going to ver 5....
>
>
> If you're going to ver 5, be sure and do the following:
> .
> 1. Do a database analysis FIRST, and if your "scatter factor" is
> too
> high, do a "dump-and-load". Epicor does NOT have a "dump-and-load"
> for
> ver 5 ready yet!
> ( I wish I had known this BEFORE we went to ver 5)
>
> 2. Un-install Progress 9.0 from every workstation. Then go
> into"
> regedit", and delete all references to the "epicor" directory.
>
> 3. Clear out the vntgwork directories
>
> 4. Reboot and install Progress 9.1A & Vantage
>
> .... and don't put both Vantage 4 & 5 on the same
> workstation!!!!!!!!!!!! I tried, and had to Norton's CleanSweep to
> remove both of them!
>
>
> --
> Britt Moelling
> M&M Manufacturing Co.
>
>
>
> Yahoo! Groups Sponsor
>
>
>
> To access the Files Section of our Yahoo!Group for Report Builder
> and
> Crystal Reports and other 'goodies', please go to:
> http://groups.yahoo.com/group/vantage/files/. Note: You must have
> already
> linked your email address to a yahoo id to enable access.
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
> To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please go to:
> http://groups.yahoo.com/group/vantage/files/. Note: You must have
> already
> linked your email address to a yahoo id to enable access.
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
> Yahoo! Groups Sponsor

[www.debticated.com]

>
> To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please go to:
> http://groups.yahoo.com/group/vantage/files/. Note: You must have
> already linked your email address to a yahoo id to enable access.
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

--
Britt Moelling
M&M Manufacturing Co.

[Non-text portions of this message have been removed]

To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have already
linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

I removed every reference which included "epicor". You do not need
anything on the old path. I just removed the "default" key (on the right
side) only.

I had probably 10-15 references on each workstation.

I would however backup the registry first.

Britt Moelling

Greg Gillette wrote:

> In regards to removing the registry entries..
> I did an uninstall of my progress client..
> I ran an UNREGOCX file from Vantage Support..
> I do a search of epicor and the first one I come across for example
> is..
>
>
> H
> EY_CLASSES_ROOT\TypeLib\{3AA8042B-DF1C-11D3-B240-0004AC5B140B}\1.0\0\win32
>
>
>
> Default \\poweredge\epicor\vantage\dll\progress IPC.OCX
>
> Would that be one to remove? And everyone I come across as well?
> There
> seems to be a lot of these.
>
> -----Original Message-----
> From: Britt Moelling [mailto:bmoelling@...]
> Sent: Thursday, May 10, 2001 10:49 AM
> To: vantage@yahoogroups.com
> Subject: Re: [Vantage] If you're going to ver 5....
>
>
> Thad
> The problem is that I did remove the progress client first, but the
> uninstall doesn't remove all the registry entries.
> For ver 3, I think the "share" dir was "dwc"
> Ver 4 used "epicor" as the share dir.
>
>
> Thad Jacobs wrote:
>
> > It may be more practical to remove the old 3.0 client and progress
> 8.3
> >
> > install first, before upgrading, so you don't have to sort between
> > versions
> > in the registry.
> >
> > On my version 3 client install, there is no reference to "epicor",
> so
> > searching for "vantage" in REGEDIT would be better. MAKE SURE TO
> MAKE
> > A
> > BACKUP OF THE REGISTRY before going through and deleting all the
> > "Vantage"
> > keys. There is no undo in REGEDIT.
> >
> >
> > -----Original Message-----
> > From: Troy Funte [mailto:tfunte@...]
> > Sent: Wednesday, May 09, 2001 2:11 PM
> > To: vantage@yahoogroups.com
> > Subject: Re: [Vantage] If you're going to ver 5....
> >
> >
> > Britt,
> > Would you say the same thing goes for Vantage 3 and 5 being on
> the
> > same
> > machines? We can't help but do that right now as we are testing,
> but
> > I
> > would love to know any details about removing every trace of 3.0
> (and
> > progress 8.3) off our workstations after the migration to 5.0.
> >
> > Troy
> >
> > ----- Original Message -----
> > From: Britt Moelling
> > To: vantage@yahoogroups.com
> > Sent: Wednesday, May 09, 2001 2:13 PM
> > Subject: [Vantage] If you're going to ver 5....
> >
> >
> > If you're going to ver 5, be sure and do the following:
> > .
> > 1. Do a database analysis FIRST, and if your "scatter factor"
> is
> > too
> > high, do a "dump-and-load". Epicor does NOT have a
> "dump-and-load"
> > for
> > ver 5 ready yet!
> > ( I wish I had known this BEFORE we went to ver 5)
> >
> > 2. Un-install Progress 9.0 from every workstation. Then go
> > into"
> > regedit", and delete all references to the "epicor" directory.
> >
> > 3. Clear out the vntgwork directories
> >
> > 4. Reboot and install Progress 9.1A & Vantage
> >
> > .... and don't put both Vantage 4 & 5 on the same
> > workstation!!!!!!!!!!!! I tried, and had to Norton's CleanSweep
> to
> > remove both of them!
> >
> >
> > --
> > Britt Moelling
> > M&M Manufacturing Co.
> >
> >
> >
> > Yahoo! Groups Sponsor
> >
> >
> >
> > To access the Files Section of our Yahoo!Group for Report Builder
> > and
> > Crystal Reports and other 'goodies', please go to:
> > http://groups.yahoo.com/group/vantage/files/. Note: You must have
> > already
> > linked your email address to a yahoo id to enable access.
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service.
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> > To access the Files Section of our Yahoo!Group for Report Builder
> and
> > Crystal Reports and other 'goodies', please go to:
> > http://groups.yahoo.com/group/vantage/files/. Note: You must have
> > already
> > linked your email address to a yahoo id to enable access.
> >
> > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> >
> >
> > Yahoo! Groups Sponsor
> [www.debticated.com]
>
> >
> > To access the Files Section of our Yahoo!Group for Report Builder
> and
> > Crystal Reports and other 'goodies', please go to:
> > http://groups.yahoo.com/group/vantage/files/. Note: You must have
> > already linked your email address to a yahoo id to enable access.
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
> --
> Britt Moelling
> M&M Manufacturing Co.
>
>
>
> [Non-text portions of this message have been removed]
>
>
> To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please go to:
> http://groups.yahoo.com/group/vantage/files/. Note: You must have
> already
> linked your email address to a yahoo id to enable access.
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
> Yahoo! Groups Sponsor

[www.newaydirect.com]

>
> To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please go to:
> http://groups.yahoo.com/group/vantage/files/. Note: You must have
> already linked your email address to a yahoo id to enable access.
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

--
Britt Moelling
M&M Manufacturing Co.

[Non-text portions of this message have been removed]

There are some additional registry and IP tuning tricks you can try. For
example, there are several shareware registry cleaning tools available. For
the most part, they look for and remove registry entries without a
corresponding link. So, if you have removed your old version, they will
identify all of the registry entries (epicor, vantage, etc...) without a
file reference and give you the option of removing them.

Additionally, there are tools you can use to optimize your IP configuration
like the RWIN setting (IP Buffer).

Michael Barry

> -----Original Message-----
> From: Britt Moelling [mailto:bmoelling@...]
> Sent: Thursday, May 10, 2001 09:08 AM
> To: vantage@yahoogroups.com
> Subject: Re: [Vantage] If you're going to ver 5....
>
>
> I removed every reference which included "epicor". You do not need
> anything on the old path. I just removed the "default" key (on the right
> side) only.
>
> I had probably 10-15 references on each workstation.
>
> I would however backup the registry first.
>
> Britt Moelling
>
>
> Greg Gillette wrote:
>
> > In regards to removing the registry entries..
> > I did an uninstall of my progress client..
> > I ran an UNREGOCX file from Vantage Support..
> > I do a search of epicor and the first one I come across for example
> > is..
> >
> >
> > H
> >
> EY_CLASSES_ROOT\TypeLib\{3AA8042B-DF1C-11D3-B240-0004AC5B140B}\1.0\0\win32
> >
> >
> >
> > Default \\poweredge\epicor\vantage\dll\progress IPC.OCX
> >
> > Would that be one to remove? And everyone I come across as well?
> > There
> > seems to be a lot of these.
> >
> > -----Original Message-----
> > From: Britt Moelling [mailto:bmoelling@...]
> > Sent: Thursday, May 10, 2001 10:49 AM
> > To: vantage@yahoogroups.com
> > Subject: Re: [Vantage] If you're going to ver 5....
> >
> >
> > Thad
> > The problem is that I did remove the progress client first, but the
> > uninstall doesn't remove all the registry entries.
> > For ver 3, I think the "share" dir was "dwc"
> > Ver 4 used "epicor" as the share dir.
> >
> >
> > Thad Jacobs wrote:
> >
> > > It may be more practical to remove the old 3.0 client and progress
> > 8.3
> > >
> > > install first, before upgrading, so you don't have to sort between
> > > versions
> > > in the registry.
> > >
> > > On my version 3 client install, there is no reference to "epicor",
> > so
> > > searching for "vantage" in REGEDIT would be better. MAKE SURE TO
> > MAKE
> > > A
> > > BACKUP OF THE REGISTRY before going through and deleting all the
> > > "Vantage"
> > > keys. There is no undo in REGEDIT.
> > >
> > >
> > > -----Original Message-----
> > > From: Troy Funte [mailto:tfunte@...]
> > > Sent: Wednesday, May 09, 2001 2:11 PM
> > > To: vantage@yahoogroups.com
> > > Subject: Re: [Vantage] If you're going to ver 5....
> > >
> > >
> > > Britt,
> > > Would you say the same thing goes for Vantage 3 and 5 being on
> > the
> > > same
> > > machines? We can't help but do that right now as we are testing,
> > but
> > > I
> > > would love to know any details about removing every trace of 3.0
> > (and
> > > progress 8.3) off our workstations after the migration to 5.0.
> > >
> > > Troy
> > >
> > > ----- Original Message -----
> > > From: Britt Moelling
> > > To: vantage@yahoogroups.com
> > > Sent: Wednesday, May 09, 2001 2:13 PM
> > > Subject: [Vantage] If you're going to ver 5....
> > >
> > >
> > > If you're going to ver 5, be sure and do the following:
> > > .
> > > 1. Do a database analysis FIRST, and if your "scatter factor"
> > is
> > > too
> > > high, do a "dump-and-load". Epicor does NOT have a
> > "dump-and-load"
> > > for
> > > ver 5 ready yet!
> > > ( I wish I had known this BEFORE we went to ver 5)
> > >
> > > 2. Un-install Progress 9.0 from every workstation. Then go
> > > into"
> > > regedit", and delete all references to the "epicor" directory.
> > >
> > > 3. Clear out the vntgwork directories
> > >
> > > 4. Reboot and install Progress 9.1A & Vantage
> > >
> > > .... and don't put both Vantage 4 & 5 on the same
> > > workstation!!!!!!!!!!!! I tried, and had to Norton's CleanSweep
> > to
> > > remove both of them!
> > >
> > >
> > > --
> > > Britt Moelling
> > > M&M Manufacturing Co.
> > >
> > >
> > >
> > > Yahoo! Groups Sponsor
> > >
> > >
> > >
> > > To access the Files Section of our Yahoo!Group for Report Builder
> > > and
> > > Crystal Reports and other 'goodies', please go to:
> > > http://groups.yahoo.com/group/vantage/files/. Note: You must have
> > > already
> > > linked your email address to a yahoo id to enable access.
> > >
> > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> > Service.
> > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > > To access the Files Section of our Yahoo!Group for Report Builder
> > and
> > > Crystal Reports and other 'goodies', please go to:
> > > http://groups.yahoo.com/group/vantage/files/. Note: You must have
> > > already
> > > linked your email address to a yahoo id to enable access.
> > >
> > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > >
> > >
> > > Yahoo! Groups Sponsor
> > [www.debticated.com]
> >
> > >
> > > To access the Files Section of our Yahoo!Group for Report Builder
> > and
> > > Crystal Reports and other 'goodies', please go to:
> > > http://groups.yahoo.com/group/vantage/files/. Note: You must have
> > > already linked your email address to a yahoo id to enable access.
> > >
> > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
> >
> > --
> > Britt Moelling
> > M&M Manufacturing Co.
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> > To access the Files Section of our Yahoo!Group for Report Builder and
> > Crystal Reports and other 'goodies', please go to:
> > http://groups.yahoo.com/group/vantage/files/. Note: You must have
> > already
> > linked your email address to a yahoo id to enable access.
> >
> > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> >
> >
> > Yahoo! Groups Sponsor
> [www.newaydirect.com]
>
> >
> > To access the Files Section of our Yahoo!Group for Report Builder and
> > Crystal Reports and other 'goodies', please go to:
> > http://groups.yahoo.com/group/vantage/files/. Note: You must have
> > already linked your email address to a yahoo id to enable access.
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
> --
> Britt Moelling
> M&M Manufacturing Co.
>
>
>
> [Non-text portions of this message have been removed]
>
>
> To access the Files Section of our Yahoo!Group for Report Builder
> and Crystal Reports and other 'goodies', please go to:
> http://groups.yahoo.com/group/vantage/files/. Note: You must
> have already linked your email address to a yahoo id to enable access.
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Unfortunately that did not resolve my problem of a very very slow log on to
the new server. A clean machine connects no problem, all going through the
same hardware.

Greg

-----Original Message-----
From: Britt Moelling [mailto:bmoelling@...]
Sent: Thursday, May 10, 2001 12:08 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] If you're going to ver 5....

I removed every reference which included "epicor". You do not need
anything on the old path. I just removed the "default" key (on the right
side) only.

I had probably 10-15 references on each workstation.

I would however backup the registry first.

Britt Moelling

Greg Gillette wrote:

> In regards to removing the registry entries..
> I did an uninstall of my progress client..
> I ran an UNREGOCX file from Vantage Support..
> I do a search of epicor and the first one I come across for example
> is..
>
>
> H
> EY_CLASSES_ROOT\TypeLib\{3AA8042B-DF1C-11D3-B240-0004AC5B140B}\1.0\0\win32
>
>
>
> Default \\poweredge\epicor\vantage\dll\progress IPC.OCX
>
> Would that be one to remove? And everyone I come across as well?
> There
> seems to be a lot of these.
>
> -----Original Message-----
> From: Britt Moelling [mailto:bmoelling@...]
> Sent: Thursday, May 10, 2001 10:49 AM
> To: vantage@yahoogroups.com
> Subject: Re: [Vantage] If you're going to ver 5....
>
>
> Thad
> The problem is that I did remove the progress client first, but the
> uninstall doesn't remove all the registry entries.
> For ver 3, I think the "share" dir was "dwc"
> Ver 4 used "epicor" as the share dir.
>
>
> Thad Jacobs wrote:
>
> > It may be more practical to remove the old 3.0 client and progress
> 8.3
> >
> > install first, before upgrading, so you don't have to sort between
> > versions
> > in the registry.
> >
> > On my version 3 client install, there is no reference to "epicor",
> so
> > searching for "vantage" in REGEDIT would be better. MAKE SURE TO
> MAKE
> > A
> > BACKUP OF THE REGISTRY before going through and deleting all the
> > "Vantage"
> > keys. There is no undo in REGEDIT.
> >
> >
> > -----Original Message-----
> > From: Troy Funte [mailto:tfunte@...]
> > Sent: Wednesday, May 09, 2001 2:11 PM
> > To: vantage@yahoogroups.com
> > Subject: Re: [Vantage] If you're going to ver 5....
> >
> >
> > Britt,
> > Would you say the same thing goes for Vantage 3 and 5 being on
> the
> > same
> > machines? We can't help but do that right now as we are testing,
> but
> > I
> > would love to know any details about removing every trace of 3.0
> (and
> > progress 8.3) off our workstations after the migration to 5.0.
> >
> > Troy
> >
> > ----- Original Message -----
> > From: Britt Moelling
> > To: vantage@yahoogroups.com
> > Sent: Wednesday, May 09, 2001 2:13 PM
> > Subject: [Vantage] If you're going to ver 5....
> >
> >
> > If you're going to ver 5, be sure and do the following:
> > .
> > 1. Do a database analysis FIRST, and if your "scatter factor"
> is
> > too
> > high, do a "dump-and-load". Epicor does NOT have a
> "dump-and-load"
> > for
> > ver 5 ready yet!
> > ( I wish I had known this BEFORE we went to ver 5)
> >
> > 2. Un-install Progress 9.0 from every workstation. Then go
> > into"
> > regedit", and delete all references to the "epicor" directory.
> >
> > 3. Clear out the vntgwork directories
> >
> > 4. Reboot and install Progress 9.1A & Vantage
> >
> > .... and don't put both Vantage 4 & 5 on the same
> > workstation!!!!!!!!!!!! I tried, and had to Norton's CleanSweep
> to
> > remove both of them!
> >
> >
> > --
> > Britt Moelling
> > M&M Manufacturing Co.
> >
> >
> >
> > Yahoo! Groups Sponsor
> >
> >
> >
> > To access the Files Section of our Yahoo!Group for Report Builder
> > and
> > Crystal Reports and other 'goodies', please go to:
> > http://groups.yahoo.com/group/vantage/files/. Note: You must have
> > already
> > linked your email address to a yahoo id to enable access.
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service.
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> > To access the Files Section of our Yahoo!Group for Report Builder
> and
> > Crystal Reports and other 'goodies', please go to:
> > http://groups.yahoo.com/group/vantage/files/. Note: You must have
> > already
> > linked your email address to a yahoo id to enable access.
> >
> > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> >
> >
> > Yahoo! Groups Sponsor
> [www.debticated.com]
>
> >
> > To access the Files Section of our Yahoo!Group for Report Builder
> and
> > Crystal Reports and other 'goodies', please go to:
> > http://groups.yahoo.com/group/vantage/files/. Note: You must have
> > already linked your email address to a yahoo id to enable access.
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
> --
> Britt Moelling
> M&M Manufacturing Co.
>
>
>
> [Non-text portions of this message have been removed]
>
>
> To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please go to:
> http://groups.yahoo.com/group/vantage/files/. Note: You must have
> already
> linked your email address to a yahoo id to enable access.
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
> Yahoo! Groups Sponsor

[www.newaydirect.com]

>
> To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please go to:
> http://groups.yahoo.com/group/vantage/files/. Note: You must have
> already linked your email address to a yahoo id to enable access.
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Try changing your network card to 10MBPS/Half Duplex. We
found that we had some cards that did not play well together with
our switch (Autonegotiating). Hard setting the card speed cleared
up the problem on machines we were having problems with.

Tim Care
Electro Chemical Finishing

----- Original Message -----
From: "Greg Gillette" <ggillette@...>
To: <vantage@yahoogroups.com>
Sent: Thursday, May 10, 2001 12:33 PM
Subject: RE: [Vantage] If you're going to ver 5....

> Unfortunately that did not resolve my problem of a very very slow log on
to
> the new server. A clean machine connects no problem, all going through
the
> same hardware.
>
> Greg
>
> -----Original Message-----
> From: Britt Moelling [mailto:bmoelling@...]
> Sent: Thursday, May 10, 2001 12:08 PM
> To: vantage@yahoogroups.com
> Subject: Re: [Vantage] If you're going to ver 5....
>
>
> I removed every reference which included "epicor". You do not need
> anything on the old path. I just removed the "default" key (on the right
> side) only.
>
> I had probably 10-15 references on each workstation.
>
> I would however backup the registry first.
>
> Britt Moelling
>
>
> Greg Gillette wrote:
>
> > In regards to removing the registry entries..
> > I did an uninstall of my progress client..
> > I ran an UNREGOCX file from Vantage Support..
> > I do a search of epicor and the first one I come across for example
> > is..
> >
> >
> > H
> >
EY_CLASSES_ROOT\TypeLib\{3AA8042B-DF1C-11D3-B240-0004AC5B140B}\1.0\0\win32
> >
> >
> >
> > Default \\poweredge\epicor\vantage\dll\progress IPC.OCX
> >
> > Would that be one to remove? And everyone I come across as well?
> > There
> > seems to be a lot of these.
> >
> > -----Original Message-----
> > From: Britt Moelling [mailto:bmoelling@...]
> > Sent: Thursday, May 10, 2001 10:49 AM
> > To: vantage@yahoogroups.com
> > Subject: Re: [Vantage] If you're going to ver 5....
> >
> >
> > Thad
> > The problem is that I did remove the progress client first, but the
> > uninstall doesn't remove all the registry entries.
> > For ver 3, I think the "share" dir was "dwc"
> > Ver 4 used "epicor" as the share dir.
> >
> >
> > Thad Jacobs wrote:
> >
> > > It may be more practical to remove the old 3.0 client and progress
> > 8.3
> > >
> > > install first, before upgrading, so you don't have to sort between
> > > versions
> > > in the registry.
> > >
> > > On my version 3 client install, there is no reference to "epicor",
> > so
> > > searching for "vantage" in REGEDIT would be better. MAKE SURE TO
> > MAKE
> > > A
> > > BACKUP OF THE REGISTRY before going through and deleting all the
> > > "Vantage"
> > > keys. There is no undo in REGEDIT.
> > >
> > >
> > > -----Original Message-----
> > > From: Troy Funte [mailto:tfunte@...]
> > > Sent: Wednesday, May 09, 2001 2:11 PM
> > > To: vantage@yahoogroups.com
> > > Subject: Re: [Vantage] If you're going to ver 5....
> > >
> > >
> > > Britt,
> > > Would you say the same thing goes for Vantage 3 and 5 being on
> > the
> > > same
> > > machines? We can't help but do that right now as we are testing,
> > but
> > > I
> > > would love to know any details about removing every trace of 3.0
> > (and
> > > progress 8.3) off our workstations after the migration to 5.0.
> > >
> > > Troy
> > >
> > > ----- Original Message -----
> > > From: Britt Moelling
> > > To: vantage@yahoogroups.com
> > > Sent: Wednesday, May 09, 2001 2:13 PM
> > > Subject: [Vantage] If you're going to ver 5....
> > >
> > >
> > > If you're going to ver 5, be sure and do the following:
> > > .
> > > 1. Do a database analysis FIRST, and if your "scatter factor"
> > is
> > > too
> > > high, do a "dump-and-load". Epicor does NOT have a
> > "dump-and-load"
> > > for
> > > ver 5 ready yet!
> > > ( I wish I had known this BEFORE we went to ver 5)
> > >
> > > 2. Un-install Progress 9.0 from every workstation. Then go
> > > into"
> > > regedit", and delete all references to the "epicor" directory.
> > >
> > > 3. Clear out the vntgwork directories
> > >
> > > 4. Reboot and install Progress 9.1A & Vantage
> > >
> > > .... and don't put both Vantage 4 & 5 on the same
> > > workstation!!!!!!!!!!!! I tried, and had to Norton's CleanSweep
> > to
> > > remove both of them!
> > >
> > >
> > > --
> > > Britt Moelling
> > > M&M Manufacturing Co.
> > >
> > >
> > >
> > > Yahoo! Groups Sponsor
> > >
> > >
> > >
> > > To access the Files Section of our Yahoo!Group for Report Builder
> > > and
> > > Crystal Reports and other 'goodies', please go to:
> > > http://groups.yahoo.com/group/vantage/files/. Note: You must have
> > > already
> > > linked your email address to a yahoo id to enable access.
> > >
> > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> > Service.
> > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > > To access the Files Section of our Yahoo!Group for Report Builder
> > and
> > > Crystal Reports and other 'goodies', please go to:
> > > http://groups.yahoo.com/group/vantage/files/. Note: You must have
> > > already
> > > linked your email address to a yahoo id to enable access.
> > >
> > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > >
> > >
> > > Yahoo! Groups Sponsor
> > [www.debticated.com]
> >
> > >
> > > To access the Files Section of our Yahoo!Group for Report Builder
> > and
> > > Crystal Reports and other 'goodies', please go to:
> > > http://groups.yahoo.com/group/vantage/files/. Note: You must have
> > > already linked your email address to a yahoo id to enable access.
> > >
> > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
> >
> > --
> > Britt Moelling
> > M&M Manufacturing Co.
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> > To access the Files Section of our Yahoo!Group for Report Builder and
> > Crystal Reports and other 'goodies', please go to:
> > http://groups.yahoo.com/group/vantage/files/. Note: You must have
> > already
> > linked your email address to a yahoo id to enable access.
> >
> > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> >
> >
> > Yahoo! Groups Sponsor
> [www.newaydirect.com]
>
> >
> > To access the Files Section of our Yahoo!Group for Report Builder and
> > Crystal Reports and other 'goodies', please go to:
> > http://groups.yahoo.com/group/vantage/files/. Note: You must have
> > already linked your email address to a yahoo id to enable access.
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
> --
> Britt Moelling
> M&M Manufacturing Co.
>
>
>
> [Non-text portions of this message have been removed]
>
>
> To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please go to:
> http://groups.yahoo.com/group/vantage/files/. Note: You must have
already
> linked your email address to a yahoo id to enable access.
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
> To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have already
linked your email address to a yahoo id to enable access.
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Thanks Britt!! I'll be able to use this info when we upgrade

-----Original Message-----
From: Britt Moelling [mailto:bmoelling@...]
Sent: Thursday, May 10, 2001 9:49 AM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] If you're going to ver 5....

Thad
The problem is that I did remove the progress client first, but the
uninstall doesn't remove all the registry entries.
For ver 3, I think the "share" dir was "dwc"
Ver 4 used "epicor" as the share dir.

Thad Jacobs wrote:

> It may be more practical to remove the old 3.0 client and progress 8.3
>
> install first, before upgrading, so you don't have to sort between
> versions
> in the registry.
>
> On my version 3 client install, there is no reference to "epicor", so
> searching for "vantage" in REGEDIT would be better. MAKE SURE TO MAKE
> A
> BACKUP OF THE REGISTRY before going through and deleting all the
> "Vantage"
> keys. There is no undo in REGEDIT.
>
>
> -----Original Message-----
> From: Troy Funte [mailto:tfunte@...]
> Sent: Wednesday, May 09, 2001 2:11 PM
> To: vantage@yahoogroups.com
> Subject: Re: [Vantage] If you're going to ver 5....
>
>
> Britt,
> Would you say the same thing goes for Vantage 3 and 5 being on the
> same
> machines? We can't help but do that right now as we are testing, but
> I
> would love to know any details about removing every trace of 3.0 (and
> progress 8.3) off our workstations after the migration to 5.0.
>
> Troy
>
> ----- Original Message -----
> From: Britt Moelling
> To: vantage@yahoogroups.com
> Sent: Wednesday, May 09, 2001 2:13 PM
> Subject: [Vantage] If you're going to ver 5....
>
>
> If you're going to ver 5, be sure and do the following:
> .
> 1. Do a database analysis FIRST, and if your "scatter factor" is
> too
> high, do a "dump-and-load". Epicor does NOT have a "dump-and-load"
> for
> ver 5 ready yet!
> ( I wish I had known this BEFORE we went to ver 5)
>
> 2. Un-install Progress 9.0 from every workstation. Then go
> into"
> regedit", and delete all references to the "epicor" directory.
>
> 3. Clear out the vntgwork directories
>
> 4. Reboot and install Progress 9.1A & Vantage
>
> .... and don't put both Vantage 4 & 5 on the same
> workstation!!!!!!!!!!!! I tried, and had to Norton's CleanSweep to
> remove both of them!
>
>
> --
> Britt Moelling
> M&M Manufacturing Co.
>
>
>
> Yahoo! Groups Sponsor
>
>
>
> To access the Files Section of our Yahoo!Group for Report Builder
> and
> Crystal Reports and other 'goodies', please go to:
> http://groups.yahoo.com/group/vantage/files/. Note: You must have
> already
> linked your email address to a yahoo id to enable access.
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
> To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please go to:
> http://groups.yahoo.com/group/vantage/files/. Note: You must have
> already
> linked your email address to a yahoo id to enable access.
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
> Yahoo! Groups Sponsor

[www.debticated.com]

>
> To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please go to:
> http://groups.yahoo.com/group/vantage/files/. Note: You must have
> already linked your email address to a yahoo id to enable access.
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.