Intermec Handhelds with Epicor 9.05.702

system · July 18, 2013, 6:22am

You do not need to type in the passwords: just print them in form of barcode on employee badges and give every employee the badge. When he will have to use the password he should just scan it from his badge.Â

Of course if you need to change the password from time to time you need to reprint the badge but this can be easily done from MS Word by the employee itself, if you provide him with a template.Â
Â
Mihai Tanase

________________________________
From: Scotty K. <scottyk537@...>
To: "vantage@yahoogroups.com" <vantage@yahoogroups.com>
Sent: Wednesday, July 17, 2013 8:53 PM
Subject: Re: [Vantage] Re: Intermec Handhelds with Epicor 9.05.702

What password are you having trouble with? What the problem excactly?
Are you connecting to a terminal sever?

There are couple things you have to do to the handheld out of the box to
get them working properly. Downgrade the OS and install a qvga hack.

On Wed, Jul 17, 2013 at 1:05 PM, devin.draeger <devind@...>wrote:

> **
>
>
> Can you send me some information on how you have yours rock solid we have
> issue with having to type passwords in our handhelds. I might need some
> information on how to get everything setup so ours run nice and smooth.
>
> --- In vantage@yahoogroups.com, "Scotty K." <scottyk537@...> wrote:
> >
> > We have several implemented on 700B. There were a few issues in the
> > beginning, but now they are pretty rock solid. We have to push the reset
> > button on them every once in a while.
> >
> >
> > On Wed, Jul 17, 2013 at 11:54 AM, devin.draeger <devin.draeger@
> ...>wrote:
> >
> > > **
> > >
> > >
> > > Has anyone have one successfully implemented one of these
> > >
> > >
> > >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>Â
>

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note:Â You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

[Non-text portions of this message have been removed]

system · July 17, 2013, 12:54pm

Has anyone have one successfully implemented one of these

system · July 17, 2013, 1:03pm

We have several implemented on 700B. There were a few issues in the
beginning, but now they are pretty rock solid. We have to push the reset
button on them every once in a while.

On Wed, Jul 17, 2013 at 11:54 AM, devin.draeger <devin.draeger@...>wrote:

> **
>
>
> Has anyone have one successfully implemented one of these
>
>
>

[Non-text portions of this message have been removed]

system · July 17, 2013, 2:05pm

Can you send me some information on how you have yours rock solid we have issue with having to type passwords in our handhelds. I might need some information on how to get everything setup so ours run nice and smooth.

--- In vantage@yahoogroups.com, "Scotty K." <scottyk537@...> wrote:
>
> We have several implemented on 700B. There were a few issues in the
> beginning, but now they are pretty rock solid. We have to push the reset
> button on them every once in a while.
>
>
> On Wed, Jul 17, 2013 at 11:54 AM, devin.draeger <devin.draeger@...>wrote:
>
> > **
> >
> >
> > Has anyone have one successfully implemented one of these
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
>

system · July 17, 2013, 2:53pm

What password are you having trouble with? What the problem excactly?
Are you connecting to a terminal sever?

There are couple things you have to do to the handheld out of the box to
get them working properly. Downgrade the OS and install a qvga hack.

On Wed, Jul 17, 2013 at 1:05 PM, devin.draeger <devind@...>wrote:

> **
>
>
> Can you send me some information on how you have yours rock solid we have
> issue with having to type passwords in our handhelds. I might need some
> information on how to get everything setup so ours run nice and smooth.
>
> --- In vantage@yahoogroups.com, "Scotty K." <scottyk537@...> wrote:
> >
> > We have several implemented on 700B. There were a few issues in the
> > beginning, but now they are pretty rock solid. We have to push the reset
> > button on them every once in a while.
> >
> >
> > On Wed, Jul 17, 2013 at 11:54 AM, devin.draeger <devin.draeger@
> ...>wrote:
> >
> > > **
> > >
> > >
> > > Has anyone have one successfully implemented one of these
> > >
> > >
> > >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>

[Non-text portions of this message have been removed]

system · July 17, 2013, 3:43pm

okay well a couple of things i have is it seems slow connecting with the termianl server through our wireless connection. If you could provide me that information how to downgrade and put that in there

--- In vantage@yahoogroups.com, "Scotty K." <scottyk537@...> wrote:
>
> What password are you having trouble with? What the problem excactly?
> Are you connecting to a terminal sever?
>
> There are couple things you have to do to the handheld out of the box to
> get them working properly. Downgrade the OS and install a qvga hack.
>
>
> On Wed, Jul 17, 2013 at 1:05 PM, devin.draeger <devind@...>wrote:
>
> > **
> >
> >
> > Can you send me some information on how you have yours rock solid we have
> > issue with having to type passwords in our handhelds. I might need some
> > information on how to get everything setup so ours run nice and smooth.
> >
> > --- In vantage@yahoogroups.com, "Scotty K." <scottyk537@> wrote:
> > >
> > > We have several implemented on 700B. There were a few issues in the
> > > beginning, but now they are pretty rock solid. We have to push the reset
> > > button on them every once in a while.
> > >
> > >
> > > On Wed, Jul 17, 2013 at 11:54 AM, devin.draeger <devin.draeger@
> > ...>wrote:
> > >
> > > > **
> > > >
> > > >
> > > > Has anyone have one successfully implemented one of these
> > > >
> > > >
> > > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
>

system · July 17, 2013, 4:21pm

The downgrade and qvga hack are for getting the handheld to display
Epicorcleanly.
It sounds like you have some infrastructure issues and there could be a
hundred different causes. It will be difficult for anyone on this forum to
walk you through everything. You should probably contact a consultant.

On Wed, Jul 17, 2013 at 2:43 PM, devin.draeger <devind@...>wrote:

> **
>
>
> okay well a couple of things i have is it seems slow connecting with the
> termianl server through our wireless connection. If you could provide me
> that information how to downgrade and put that in there
>
> --- In vantage@yahoogroups.com, "Scotty K." <scottyk537@...> wrote:
> >
> > What password are you having trouble with? What the problem excactly?
> > Are you connecting to a terminal sever?
> >
> > There are couple things you have to do to the handheld out of the box to
> > get them working properly. Downgrade the OS and install a qvga hack.
> >
> >
> > On Wed, Jul 17, 2013 at 1:05 PM, devin.draeger <devind@...>wrote:
> >
> > > **
> > >
> > >
> > > Can you send me some information on how you have yours rock solid we
> have
> > > issue with having to type passwords in our handhelds. I might need some
> > > information on how to get everything setup so ours run nice and smooth.
> > >
> > > --- In vantage@yahoogroups.com, "Scotty K." <scottyk537@> wrote:
> > > >
> > > > We have several implemented on 700B. There were a few issues in the
> > > > beginning, but now they are pretty rock solid. We have to push the
> reset
> > > > button on them every once in a while.
> > > >
> > > >
> > > > On Wed, Jul 17, 2013 at 11:54 AM, devin.draeger <devin.draeger@
> > > ...>wrote:
> > > >
> > > > > **
> > > > >
> > > > >
> > > > > Has anyone have one successfully implemented one of these
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > >
> > >
> > >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>

[Non-text portions of this message have been removed]

system · July 17, 2013, 4:27pm

Okay so how do i get that information for the downgrade and the qvga hack. What do i downgrade to?

--- In vantage@yahoogroups.com, "Scotty K." <scottyk537@...> wrote:
>
> The downgrade and qvga hack are for getting the handheld to display
> Epicorcleanly.
> It sounds like you have some infrastructure issues and there could be a
> hundred different causes. It will be difficult for anyone on this forum to
> walk you through everything. You should probably contact a consultant.
>
>
> On Wed, Jul 17, 2013 at 2:43 PM, devin.draeger <devind@...>wrote:
>
> > **
> >
> >
> > okay well a couple of things i have is it seems slow connecting with the
> > termianl server through our wireless connection. If you could provide me
> > that information how to downgrade and put that in there
> >
> > --- In vantage@yahoogroups.com, "Scotty K." <scottyk537@> wrote:
> > >
> > > What password are you having trouble with? What the problem excactly?
> > > Are you connecting to a terminal sever?
> > >
> > > There are couple things you have to do to the handheld out of the box to
> > > get them working properly. Downgrade the OS and install a qvga hack.
> > >
> > >
> > > On Wed, Jul 17, 2013 at 1:05 PM, devin.draeger <devind@>wrote:
> > >
> > > > **
> > > >
> > > >
> > > > Can you send me some information on how you have yours rock solid we
> > have
> > > > issue with having to type passwords in our handhelds. I might need some
> > > > information on how to get everything setup so ours run nice and smooth.
> > > >
> > > > --- In vantage@yahoogroups.com, "Scotty K." <scottyk537@> wrote:
> > > > >
> > > > > We have several implemented on 700B. There were a few issues in the
> > > > > beginning, but now they are pretty rock solid. We have to push the
> > reset
> > > > > button on them every once in a while.
> > > > >
> > > > >
> > > > > On Wed, Jul 17, 2013 at 11:54 AM, devin.draeger <devin.draeger@
> > > > ...>wrote:
> > > > >
> > > > > > **
> > > > > >
> > > > > >
> > > > > > Has anyone have one successfully implemented one of these
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > > [Non-text portions of this message have been removed]
> > > > >
> > > >
> > > >
> > > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
>