Labor reporting glitch

At this point I highly doubt it applies. Rebooting the server and Progress
restarts would have cleared the transactions, if any. If you are talking to
support and don't have a copy of endact.r to you might want to ask them
about it. In addition to allowing the closing of open activities it would
allow checking just to see if any are open but have never been closed. Last
time I had a Data Collection PC reboot in mid-labor transaction and had to
end the activities it looked like it might be a good tool to view raw and
in-process activities. You could try it at some time when you are certain
the person is not clocked in at all and see if the system thinks there are
any. Like I said, a real wild guess and I would add that I am no expert on
Vantage internals, but it would not be hard to check using endact.r .
Good luck,
-Todd C.

-----Original Message-----
From: Oleg Tumarkin [mailto:otumarkin@...]
Sent: Tuesday, March 06, 2001 2:51 PM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Labor reporting glitch


This entry was done a couple weeks ago and I have rebooted the server and
started/ended the progress number of times since then. If what you are
saying still applies, where do I look for this lost session?

Oleg
From: Todd Caughey [SMTP:caugheyt@...]
Oleg,
A wild guess...just in case. Did the person use Data Collection from a PC
and maybe have to reboot during a transaction?
Possibly there is a ghost session needing to be closed with promon or when
they are known to be clocked out you could use endact.r (end activity
routine form support) to spot and close any activities in limbo.
-Todd C.
Harvey Vogel Mfg. Co.


-----Original Message-----
From: Oleg Tumarkin [mailto:otumarkin@...]

I have a very strange problem with one of our jobs. Under production detail
and in job tracker there is a certain person listed as the one who
performed an operation on a certain day. However, when I go in under that
person's labor entry screen she has a number of other jobs in detail for
that day, but not this one. I called tech. support, but they haven't got
back to me, yet. Has anybody seen anything like this, and what could have
caused it? Please, don't tell me I have a corrupt database.;(


Oleg Tumarkin
Herker Industries
Vantage 4.904





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> >





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> >






Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> >



[Non-text portions of this message have been removed]





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> >



[Non-text portions of this message have been removed]





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> >




Yahoo! Groups Sponsor

< http://rd.yahoo.com/M=162801.1342103.2934627/D=egroupmail/S=1700007183:
<http://rd.yahoo.com/M=162801.1342103.2934627/D=egroupmail/S=1700007183:>
N/A=
599088/* http://www.knowledgestorm.com/jump_white.html?c=Yahoo
<http://www.knowledgestorm.com/jump_white.html?c=Yahoo&n=eLert_Co>
&n=eLert_Co
mput
ersInternet_Software_WhiteGridTime&t=ad> Click Here to Find Software Faster
Click Here to Find Software Faster

< http://us.adserver.yahoo.com/l?M=162801.1342103.2934627/D=egroupmail/S=
<http://us.adserver.yahoo.com/l?M=162801.1342103.2934627/D=egroupmail/S=>
1700
007183:N/A=599088/rand=556718433>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> > .




[Non-text portions of this message have been removed]





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>




Yahoo! Groups Sponsor

<http://rd.yahoo.com/M=162801.1342103.2934627/D=egroupmail/S=1700007183:N/A=
599089/*http://www.knowledgestorm.com/jump_white.html?c=Yahoo&n=eLert_Comput
ersInternet_Software_WhiteGridOptions&t=ad> Click Here to Find Software
Faster
Click Here to Find Software Faster

<http://us.adserver.yahoo.com/l?M=162801.1342103.2934627/D=egroupmail/S=1700
007183:N/A=599089/rand=301972599>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
I have a very strange problem with one of our jobs. Under production detail
and in job tracker there is a certain person listed as the one who
performed an operation on a certain day. However, when I go in under that
person's labor entry screen she has a number of other jobs in detail for
that day, but not this one. I called tech. support, but they haven't got
back to me, yet. Has anybody seen anything like this, and what could have
caused it? Please, don't tell me I have a corrupt database.;(


Oleg Tumarkin
Herker Industries
Vantage 4.904
Is anyone making a job adjustment this does not update the master labor
tables just the job itself?

-----Original Message-----
From: Oleg Tumarkin [mailto:otumarkin@...]
Sent: Tuesday, March 06, 2001 11:28 AM
To: 'vantage@yahoogroups.com'
Subject: [Vantage] Labor reporting glitch


I have a very strange problem with one of our jobs. Under production detail
and in job tracker there is a certain person listed as the one who
performed an operation on a certain day. However, when I go in under that
person's labor entry screen she has a number of other jobs in detail for
that day, but not this one. I called tech. support, but they haven't got
back to me, yet. Has anybody seen anything like this, and what could have
caused it? Please, don't tell me I have a corrupt database.;(


Oleg Tumarkin
Herker Industries
Vantage 4.904





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
If I understand correctly, labor detail report would show that there was a job adjustment done and the report shows no such thing.

Is anyone making a job adjustment this does not update the master labor
tables just the job itself?

-----Original Message-----
From: Oleg Tumarkin [mailto:otumarkin@...]

I have a very strange problem with one of our jobs. Under production detail
and in job tracker there is a certain person listed as the one who
performed an operation on a certain day. However, when I go in under that
person's labor entry screen she has a number of other jobs in detail for
that day, but not this one. I called tech. support, but they haven't got
back to me, yet. Has anybody seen anything like this, and what could have
caused it? Please, don't tell me I have a corrupt database.;(


Oleg Tumarkin
Herker Industries
Vantage 4.904





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Were you looking at the current day's labor? As I am told by the individual
who reviews our labor entries and production detail reports, the current day
doesn't show up in labor entry until the person has clocked out. (bummer if
you need to make corrections). However, the info does show up in the job
tracker and on the production detail reports.
Deb
Reeder & Kline

-----Original Message-----
From: Oleg Tumarkin [mailto:otumarkin@...]

I have a very strange problem with one of our jobs. Under production detail
and in job tracker there is a certain person listed as the one who
performed an operation on a certain day. However, when I go in under that
person's labor entry screen she has a number of other jobs in detail for
that day, but not this one. I called tech. support, but they haven't got
back to me, yet. Has anybody seen anything like this, and what could have
caused it? Please, don't tell me I have a corrupt database.;(


Oleg Tumarkin
Herker Industries
Vantage 4.904





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/






Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



[Non-text portions of this message have been removed]
Night shift also has a few glitches and production detail will show a date
but to find it in the labor edit you need to look at the day before/day
after, depending on when the time was clocked.

Lisa
Reeder & Kline

-----Original Message-----
From: Wilmoth, Deb [mailto:Deb@...]
Sent: Tuesday, March 06, 2001 2:26 PM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Labor reporting glitch


Were you looking at the current day's labor? As I am told by the individual
who reviews our labor entries and production detail reports, the current day
doesn't show up in labor entry until the person has clocked out. (bummer if
you need to make corrections). However, the info does show up in the job
tracker and on the production detail reports.
Deb
Reeder & Kline

-----Original Message-----
From: Oleg Tumarkin [mailto:otumarkin@...]

I have a very strange problem with one of our jobs. Under production detail
and in job tracker there is a certain person listed as the one who
performed an operation on a certain day. However, when I go in under that
person's labor entry screen she has a number of other jobs in detail for
that day, but not this one. I called tech. support, but they haven't got
back to me, yet. Has anybody seen anything like this, and what could have
caused it? Please, don't tell me I have a corrupt database.;(


Oleg Tumarkin
Herker Industries
Vantage 4.904





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/






Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



[Non-text portions of this message have been removed]





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



[Non-text portions of this message have been removed]
Tried that before. Nope. Does not show on it on amy of the surrounding days. Good first place to check though.
Night shift also has a few glitches and production detail will show a date
but to find it in the labor edit you need to look at the day before/day
after, depending on when the time was clocked.

Lisa
Reeder & Kline

-----Original Message-----
From: Wilmoth, Deb [mailto:Deb@...]
Sent: Tuesday, March 06, 2001 2:26 PM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Labor reporting glitch


Were you looking at the current day's labor? As I am told by the individual
who reviews our labor entries and production detail reports, the current day
doesn't show up in labor entry until the person has clocked out. (bummer if
you need to make corrections). However, the info does show up in the job
tracker and on the production detail reports.
Deb
Reeder & Kline

-----Original Message-----
From: Oleg Tumarkin [mailto:otumarkin@...]

I have a very strange problem with one of our jobs. Under production detail
and in job tracker there is a certain person listed as the one who
performed an operation on a certain day. However, when I go in under that
person's labor entry screen she has a number of other jobs in detail for
that day, but not this one. I called tech. support, but they haven't got
back to me, yet. Has anybody seen anything like this, and what could have
caused it? Please, don't tell me I have a corrupt database.;(


Oleg Tumarkin
Herker Industries
Vantage 4.904





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/






Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



[Non-text portions of this message have been removed]





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



[Non-text portions of this message have been removed]





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Oleg,
A wild guess...just in case. Did the person use Data Collection from a PC
and maybe have to reboot during a transaction?
Possibly there is a ghost session needing to be closed with promon or when
they are known to be clocked out you could use endact.r (end activity
routine form support) to spot and close any activities in limbo.
-Todd C.
Harvey Vogel Mfg. Co.

-----Original Message-----
From: Oleg Tumarkin [mailto:otumarkin@...]
Sent: Tuesday, March 06, 2001 1:44 PM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Labor reporting glitch



Tried that before. Nope. Does not show on it on amy of the surrounding days.
Good first place to check though.
Night shift also has a few glitches and production detail will show a date
but to find it in the labor edit you need to look at the day before/day
after, depending on when the time was clocked.

Lisa
Reeder & Kline

-----Original Message-----
From: Wilmoth, Deb [mailto:Deb@...]
Sent: Tuesday, March 06, 2001 2:26 PM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Labor reporting glitch


Were you looking at the current day's labor? As I am told by the individual
who reviews our labor entries and production detail reports, the current day
doesn't show up in labor entry until the person has clocked out. (bummer if
you need to make corrections). However, the info does show up in the job
tracker and on the production detail reports.
Deb
Reeder & Kline

-----Original Message-----
From: Oleg Tumarkin [mailto:otumarkin@...]

I have a very strange problem with one of our jobs. Under production detail
and in job tracker there is a certain person listed as the one who
performed an operation on a certain day. However, when I go in under that
person's labor entry screen she has a number of other jobs in detail for
that day, but not this one. I called tech. support, but they haven't got
back to me, yet. Has anybody seen anything like this, and what could have
caused it? Please, don't tell me I have a corrupt database.;(


Oleg Tumarkin
Herker Industries
Vantage 4.904





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>






Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>



[Non-text portions of this message have been removed]





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>



[Non-text portions of this message have been removed]





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>




Yahoo! Groups Sponsor

<http://rd.yahoo.com/M=162801.1342103.2934627/D=egroupmail/S=1700007183:N/A=
599088/*http://www.knowledgestorm.com/jump_white.html?c=Yahoo&n=eLert_Comput
ersInternet_Software_WhiteGridTime&t=ad> Click Here to Find Software Faster
Click Here to Find Software Faster

<http://us.adserver.yahoo.com/l?M=162801.1342103.2934627/D=egroupmail/S=1700
007183:N/A=599088/rand=556718433>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
Nope. It is a couple weeks old. Yes, I know that it is locked now and cannot be changed directly, but I still want to know what is going on.
Were you looking at the current day's labor? As I am told by the individual
who reviews our labor entries and production detail reports, the current day
doesn't show up in labor entry until the person has clocked out. (bummer if
you need to make corrections). However, the info does show up in the job
tracker and on the production detail reports.
Deb
Reeder & Kline

-----Original Message-----
From: Oleg Tumarkin [mailto:otumarkin@...]

I have a very strange problem with one of our jobs. Under production detail
and in job tracker there is a certain person listed as the one who
performed an operation on a certain day. However, when I go in under that
person's labor entry screen she has a number of other jobs in detail for
that day, but not this one. I called tech. support, but they haven't got
back to me, yet. Has anybody seen anything like this, and what could have
caused it? Please, don't tell me I have a corrupt database.;(


Oleg Tumarkin
Herker Industries
Vantage 4.904





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/






Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



[Non-text portions of this message have been removed]





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
This entry was done a couple weeks ago and I have rebooted the server and
started/ended the progress number of times since then. If what you are
saying still applies, where do I look for this lost session?

Oleg
From: Todd Caughey [SMTP:caugheyt@...]
Oleg,
A wild guess...just in case. Did the person use Data Collection from a PC
and maybe have to reboot during a transaction?
Possibly there is a ghost session needing to be closed with promon or when
they are known to be clocked out you could use endact.r (end activity
routine form support) to spot and close any activities in limbo.
-Todd C.
Harvey Vogel Mfg. Co.


-----Original Message-----
From: Oleg Tumarkin [mailto:otumarkin@...]

I have a very strange problem with one of our jobs. Under production detail
and in job tracker there is a certain person listed as the one who
performed an operation on a certain day. However, when I go in under that
person's labor entry screen she has a number of other jobs in detail for
that day, but not this one. I called tech. support, but they haven't got
back to me, yet. Has anybody seen anything like this, and what could have
caused it? Please, don't tell me I have a corrupt database.;(


Oleg Tumarkin
Herker Industries
Vantage 4.904





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>






Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>



[Non-text portions of this message have been removed]





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>



[Non-text portions of this message have been removed]





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>




Yahoo! Groups Sponsor

<http://rd.yahoo.com/M=162801.1342103.2934627/D=egroupmail/S=1700007183:
N/A=
599088/*http://www.knowledgestorm.com/jump_white.html?c=Yahoo&n=eLert_Co
mput
ersInternet_Software_WhiteGridTime&t=ad> Click Here to Find Software Faster
Click Here to Find Software Faster

<http://us.adserver.yahoo.com/l?M=162801.1342103.2934627/D=egroupmail/S=
1700
007183:N/A=599088/rand=556718433>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/