just to add another option if you choose to ditch the stinksys. I put in an
HP-4000 Print Appliance a year ago... handles up to 64 print queues.
Currently I have 4 large plotters and 15+ color and b&w laser printers
spooling to it. The things an animal! Never! I mean NEVER!! hiccups :)) Easy
Java config tool and once its in place adding additional printers is a
breeze.
http://www.pandi.hp.com/pandi-db/sainfo.main?product=jd4107a

-----Original Message-----
From: Jim Stetter [mailto:jimstetter@...]
Sent: Tuesday, February 06, 2001 2:19 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Laserjet 6p and Report Builder

Mike, I would ditch the linksys print server if I were you. I had one and
could not get it to work for printing more than a page or 2. Also would
hang frequently with printer drivers that wanted to communicate directly
with printers. I know this does not help you but thought you might like to
know you are not alone with this problem.

Jim Stetter
Snow Filtration
-----Original Message-----
From: cakronequipment@... [mailto:cakronequipment@...]
Sent: Tuesday, February 06, 2001 1:16 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Laserjet 6p and Report Builder

LaserJet 6p w/2 meg ram hooked to 3 port linksys print server.
Using NT 4.0 SP 6 as server, clients are 9x. Vantage 4.0

Printer prints small reports and non-Report Builder items just
fine.

When compiling a report that takes more than 10 mins (roughly)
Get a Report Builder/Windows printer error. Says printer not
responding, cable not plugged in etc etc.

Has anyone seen this error? If yes how did you fix it?

Thanks

Mike DeBerry
cakronequipment@...

LaserJet 6p w/2 meg ram hooked to 3 port linksys print server.
Using NT 4.0 SP 6 as server, clients are 9x. Vantage 4.0

Printer prints small reports and non-Report Builder items just
fine.

When compiling a report that takes more than 10 mins (roughly)
Get a Report Builder/Windows printer error. Says printer not
responding, cable not plugged in etc etc.

Has anyone seen this error? If yes how did you fix it?

Thanks

Mike DeBerry
cakronequipment@...

For the printer in question open printer properties - ports - try unchecking
"enable bi-directional support".

E. Lee Ingalls III
Commercial Tool & Die Inc.
(p)616.785.8100 (f)616.785.8120
eli3@... <mailto:eli3@...>

Fortitudine Vincimus: "by Endurance we conquer."

-----Original Message-----
From: cakronequipment@... [mailto:cakronequipment@...]
Sent: Tuesday, February 06, 2001 1:16 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Laserjet 6p and Report Builder

LaserJet 6p w/2 meg ram hooked to 3 port linksys print server.
Using NT 4.0 SP 6 as server, clients are 9x. Vantage 4.0

Printer prints small reports and non-Report Builder items just
fine.

When compiling a report that takes more than 10 mins (roughly)
Get a Report Builder/Windows printer error. Says printer not
responding, cable not plugged in etc etc.

Has anyone seen this error? If yes how did you fix it?

Mike, I would ditch the linksys print server if I were you. I had one and
could not get it to work for printing more than a page or 2. Also would
hang frequently with printer drivers that wanted to communicate directly
with printers. I know this does not help you but thought you might like to
know you are not alone with this problem.

Jim Stetter
Snow Filtration
-----Original Message-----
From: cakronequipment@... [mailto:cakronequipment@...]
Sent: Tuesday, February 06, 2001 1:16 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Laserjet 6p and Report Builder

LaserJet 6p w/2 meg ram hooked to 3 port linksys print server.
Using NT 4.0 SP 6 as server, clients are 9x. Vantage 4.0

Printer prints small reports and non-Report Builder items just
fine.

When compiling a report that takes more than 10 mins (roughly)
Get a Report Builder/Windows printer error. Says printer not
responding, cable not plugged in etc etc.

Has anyone seen this error? If yes how did you fix it?

Thanks

Mike DeBerry
cakronequipment@...

[Non-text portions of this message have been removed]