Lock ups, records in use, etc

Yahoo Archive
1
At 08:53 AM 12/15/2000 , you wrote:
>I have also experience more lockups than usual since intalling the 904
>patch. Mine are confined to 1 or 2 workstations - usually twice a day I

Dan, did you load any Progress patches along with it?

-Wayne
2
I installed vantage patch 904 and progress patch 90b44 on 12/9, and since
then have been plagued with work station lock ups, and "record in use"
errors being generated. I have to frequently use promon to disconnect users
that were ungracefully disconnected from vantage.

anyone else experiencing similar problems, and have a fix. I am tempted to
go back to the old patches.

thanks

Norm Watkins
3
Norm,

Actually I get that all the time. Its actually gotten better for me since
the latest patches. I run Vantage on our Terminal Server and was thinking
that may be the root of my problems. If you come up with anything, please
let me know.


Jim MacMillan
System Administrator
Sales/Marketing
Scientific Dimensions
800-523-6180
jimmac@...
4
I have been getting this since we went on 4.0 . Now I get people
clocked into jobs with no number, 0 Assembly, 0 Operation. Does anyone
have this problem as well? I have called Epicor and I was told that the
blank job problem only happens on Win95 machines. Are you on Win95? My
labor person is getting tired of fixing labor all of the time.

Juliet

-----Original Message-----
From: nwatkins@... [mailto:nwatkins@...]
Sent: Thursday, December 14, 2000 9:29 AM
To: vantage@egroups.com
Subject: [Vantage] lock ups, records in use, etc

I installed vantage patch 904 and progress patch 90b44 on 12/9, and
since
then have been plagued with work station lock ups, and "record in use"
errors being generated. I have to frequently use promon to disconnect
users
that were ungracefully disconnected from vantage.

anyone else experiencing similar problems, and have a fix. I am tempted
to
go back to the old patches.

thanks

Norm Watkins



We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go
to www.egroups.com, login and be sure to save your password, choose My
Groups, choose Vantage, then choose Files. If you save the password,
the link above will work the next time you try it.)
5
Is anyone using a VPN connection between branches? And if so how do you feel
about the security.

Are you using Cable, ISDN, ADSL, etc for the connection?



Ron Newell
IT/MIS
Neon Products
1695 Sargent Ave.
Winnipeg, MB R3H 0C4
http://www.neon-products.com/
mailto:rnewell@...

This message is intended only for the use of the person(s) ("intended
recipient")
to whom it is addressed. It may contain information which is privileged and
confidential.
If you are not the intended recipient please contact the sender as soon as
possible.
Accordingly any dissemination, distribution, copying or other use of this
message or any
of its content by any person other than the Intended Recipient is strictly
prohibited. We
have taken every precaution to ensure that this message is virus free but
we can not be
responsible for any damage that may be caused by its content.

-----Original Message-----
From: Jim MacMillan [mailto:jimmac@...]
Sent: Thursday, December 14, 2000 9:31 AM
To: vantage@egroups.com
Subject: Re: [Vantage] lock ups, records in use, etc

Norm,

Actually I get that all the time. Its actually gotten better for me since
the latest patches. I run Vantage on our Terminal Server and was thinking
that may be the root of my problems. If you come up with anything, please
let me know.


Jim MacMillan
System Administrator
Sales/Marketing
Scientific Dimensions
800-523-6180
jimmac@...



We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)
6
All our work stations are W98 with server running NT4 with latest patch.

norm watkins


[Non-text portions of this message have been removed]
7
I've seen this problem with the assm. 0, operation 0 and it occured on a Windows NT 4 workstation. Epicor support also told me that it only occurred on Windows 95 computers, but as you see that wasn't the case. They really weren't much help on the issue. The problem was solved by replacing the network card on the computer generating the error.

Ted Kitch
ted@...
----- Original Message -----
From: Juliet Martin
To: vantage@egroups.com
Sent: Thursday, December 14, 2000 9:47 AM
Subject: RE: [Vantage] lock ups, records in use, etc


I have been getting this since we went on 4.0 . Now I get people
clocked into jobs with no number, 0 Assembly, 0 Operation. Does anyone
have this problem as well? I have called Epicor and I was told that the
blank job problem only happens on Win95 machines. Are you on Win95? My
labor person is getting tired of fixing labor all of the time.

Juliet

-----Original Message-----
From: nwatkins@... [mailto:nwatkins@...]
Sent: Thursday, December 14, 2000 9:29 AM
To: vantage@egroups.com
Subject: [Vantage] lock ups, records in use, etc

I installed vantage patch 904 and progress patch 90b44 on 12/9, and
since
then have been plagued with work station lock ups, and "record in use"
errors being generated. I have to frequently use promon to disconnect
users
that were ungracefully disconnected from vantage.

anyone else experiencing similar problems, and have a fix. I am tempted
to
go back to the old patches.

thanks

Norm Watkins



We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go
to www.egroups.com, login and be sure to save your password, choose My
Groups, choose Vantage, then choose Files. If you save the password,
the link above will work the next time you try it.)




eGroups Sponsor


We no longer allow attachments to files. To access/share Report Files, please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to www.egroups.com, login and be sure to save your password, choose My Groups, choose Vantage, then choose Files. If you save the password, the link above will work the next time you try it.)



[Non-text portions of this message have been removed]
8
Great! All of my shop PC's have on board NIC's.

I've seen this problem with the assm. 0, operation 0 and it occured on a
Windows NT 4 workstation. Epicor support also told me that it only
occurred on Windows 95 computers, but as you see that wasn't the case.
They really weren't much help on the issue. The problem was solved by
replacing the network card on the computer generating the error.

Ted Kitch
ted@...


I have been getting this since we went on 4.0 . Now I get people
clocked into jobs with no number, 0 Assembly, 0 Operation. Does
anyone
have this problem as well? I have called Epicor and I was told that
the
blank job problem only happens on Win95 machines. Are you on Win95?
My
labor person is getting tired of fixing labor all of the time.

Juliet
9
Most PC's that have an onboard NIC that can be disabled. Check your system documentation to find out how to do that.

Ted Kitch
ted@...
----- Original Message -----
From: Juliet Martin
To: vantage@egroups.com
Sent: Thursday, December 14, 2000 1:18 PM
Subject: RE: [Vantage] lock ups, records in use, etc


Great! All of my shop PC's have on board NIC's.

I've seen this problem with the assm. 0, operation 0 and it occured on a
Windows NT 4 workstation. Epicor support also told me that it only
occurred on Windows 95 computers, but as you see that wasn't the case.
They really weren't much help on the issue. The problem was solved by
replacing the network card on the computer generating the error.

Ted Kitch
ted@...


I have been getting this since we went on 4.0 . Now I get people
clocked into jobs with no number, 0 Assembly, 0 Operation. Does
anyone
have this problem as well? I have called Epicor and I was told that
the
blank job problem only happens on Win95 machines. Are you on Win95?
My
labor person is getting tired of fixing labor all of the time.

Juliet




eGroups Sponsor


We no longer allow attachments to files. To access/share Report Files, please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to www.egroups.com, login and be sure to save your password, choose My Groups, choose Vantage, then choose Files. If you save the password, the link above will work the next time you try it.)



[Non-text portions of this message have been removed]
10
I have also experience more lockups than usual since intalling the 904
patch. Mine are confined to 1 or 2 workstations - usually twice a day I
have to disconnect someone from the database.

Daniel A. Clifton
Northwest Swiss-Matic


-----Original Message-----
From: nwatkins@... [mailto:nwatkins@...]
Sent: Thursday, December 14, 2000 9:29 AM
To: vantage@egroups.com
Subject: [Vantage] lock ups, records in use, etc


I installed vantage patch 904 and progress patch 90b44 on 12/9, and
since
then have been plagued with work station lock ups, and "record in use"
errors being generated. I have to frequently use promon to disconnect
users
that were ungracefully disconnected from vantage.

anyone else experiencing similar problems, and have a fix. I am tempted
to
go back to the old patches.

thanks

Norm Watkins



We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go
to www.egroups.com, login and be sure to save your password, choose My
Groups, choose Vantage, then choose Files. If you save the password,
the link above will work the next time you try it.)