Manufacturing to stock cost not equal to job costs

Yes Michael I can confirm the costs had been collected. I have this into support, however it has been four weeks now, they haven't been able to figure it out.
Thanks,
Kathy

"Michael D. Howard" <mike@...> wrote:
Can you confirm that the discrepant costs had actually
been collected to the job prior to the MFG-STK transaction?



-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf Of
kathy_archery
Sent: Tuesday, May 31, 2005 1:21 PM
To: vantage@yahoogroups.com
Subject: [Vantage] MANUFACTURING TO STOCK COST NOT EQUAL TO JOB COSTS


I use average costing. In a hand-full of our assemblies the entire
job's cost doesn't equal the MFG-STK transaction. We have a parent
part that pulls and views the eaches as an assembly into the 1000 pack
part number. In most of these jobs the job cost is equal or a few
cents off from the cost put into inventory. The parts are not checked
out and I've looked at the incorrect with a fine tooth comb and I
don't see anything wrong with the BOMs. Has anyone had this happen
before? Support hasn't been able to help me with this. We're on
6.10.519 soon to go to patch 6.10.526.

Thanks in advance for your help.
Kathy




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links












Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links







__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

[Non-text portions of this message have been removed]
I use average costing. In a hand-full of our assemblies the entire
job's cost doesn't equal the MFG-STK transaction. We have a parent
part that pulls and views the eaches as an assembly into the 1000 pack
part number. In most of these jobs the job cost is equal or a few
cents off from the cost put into inventory. The parts are not checked
out and I've looked at the incorrect with a fine tooth comb and I
don't see anything wrong with the BOMs. Has anyone had this happen
before? Support hasn't been able to help me with this. We're on
6.10.519 soon to go to patch 6.10.526.

Thanks in advance for your help.
Kathy
I have seen this when only partial of the parts are issued prior to the
manufactured receipts.

Frank Zeigafuse
Innovative Office Products
General Manager
Direct Phone: 610-559-6369
Email: fzeigafuse@...



-----Original Message-----
From: kathy_archery [mailto:kathy_archery@...]
Sent: Tuesday, May 31, 2005 2:21 PM
To: vantage@yahoogroups.com
Subject: [Vantage] MANUFACTURING TO STOCK COST NOT EQUAL TO JOB COSTS


I use average costing. In a hand-full of our assemblies the entire
job's cost doesn't equal the MFG-STK transaction. We have a parent
part that pulls and views the eaches as an assembly into the 1000 pack
part number. In most of these jobs the job cost is equal or a few
cents off from the cost put into inventory. The parts are not checked
out and I've looked at the incorrect with a fine tooth comb and I
don't see anything wrong with the BOMs. Has anyone had this happen
before? Support hasn't been able to help me with this. We're on
6.10.519 soon to go to patch 6.10.526.

Thanks in advance for your help.
Kathy




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
Can you confirm that the discrepant costs had actually
been collected to the job prior to the MFG-STK transaction?



-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf Of
kathy_archery
Sent: Tuesday, May 31, 2005 1:21 PM
To: vantage@yahoogroups.com
Subject: [Vantage] MANUFACTURING TO STOCK COST NOT EQUAL TO JOB COSTS


I use average costing. In a hand-full of our assemblies the entire
job's cost doesn't equal the MFG-STK transaction. We have a parent
part that pulls and views the eaches as an assembly into the 1000 pack
part number. In most of these jobs the job cost is equal or a few
cents off from the cost put into inventory. The parts are not checked
out and I've looked at the incorrect with a fine tooth comb and I
don't see anything wrong with the BOMs. Has anyone had this happen
before? Support hasn't been able to help me with this. We're on
6.10.519 soon to go to patch 6.10.526.

Thanks in advance for your help.
Kathy




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links