MES - how do you enter multiple reason codes for nonconformance

system · July 9, 2009, 10:25am

Set up a reason code that means multiple codes, eg MULT
In a user field, eg character01, enter in each code separated by a delimiter, eg ;.
You have to modify the forms to put that user field on the form, so the inspector can enter it.
if you want the reason to be both VMS "Vendor Matl - Too Soft" and CTW "Cutting tool worn", inspector puts VMS;CTW in that user field.
Then later you can break this out in Crystal, easily enough using the Split function.
Not perfect, but it works well enough

________________________________
From: Rob Bucek <rbucek@...>
To: vantage@yahoogroups.com
Sent: Wednesday, July 8, 2009 4:50:36 PM
Subject: RE: [Vantage] Re: MES - how do you enter multiple reason codes for nonconformance

Im not sure of your delivery time frame but I don't think ill get back
to it for several weeks at the very earliest...

From: vantage@yahoogroups .com [mailto:vantage@yahoogroups .com] On Behalf
Of Brian W. Spolarich
Sent: Wednesday, July 08, 2009 4:36 PM
To: vantage@yahoogroups .com
Subject: RE: [Vantage] Re: MES - how do you enter multiple reason codes
for nonconformance

That's my thought as well. I had hoped someone had already accomplished
this and would be willing to share. :-)

--
Brian W. Spolarich ~ Manager, Information Services ~ Advanced Photonix /
Picometrix
bspolarich@advanced photonix. com
<mailto:bspolarich% 40advancedphoton ix.com> ~ 734-864-5618 ~
www.advancedphotoni x.com

-----Original Message-----
From: vantage@yahoogroups .com <mailto:vantage% 40yahoogroups. com>
[mailto:vantage@yahoogroups .com <mailto:vantage% 40yahoogroups. com> ] On
Behalf Of Rob Bucek
Sent: Wednesday, July 08, 2009 5:29 PM
To: vantage@yahoogroups .com <mailto:vantage% 40yahoogroups. com>
Subject: RE: [Vantage] Re: MES - how do you enter multiple reason codes
for nonconformance

Seems to me the way they have that set up its pretty much a one to one
relationship. I had to look at that from a similar thought process but
revolving around the blame game and tying multiple operators to a
nonconformance which is stored in the same table. Though I haven't
gotten to it I was going to use a UD table and integrate it for that
purpose to create my one to many relationship. Not very ideal, but...

From: vantage@yahoogroups .com <mailto:vantage% 40yahoogroups. com>
[mailto:vantage@yahoogroups .com <mailto:vantage% 40yahoogroups. com> ] On
Behalf
Of Brian W. Spolarich
Sent: Wednesday, July 08, 2009 4:17 PM
To: vantage@yahoogroups .com <mailto:vantage% 40yahoogroups. com>
Subject: [Vantage] Re: MES - how do you enter multiple reason codes for
nonconformance

I'm being asked about the very same issue here.

Can folks chime in on where they've wound up?

I basically want to be able to have operators report multiple reason
codes and associated quantities for scrap at the end of an operation so
we can do statistical analysis on the data later.

--- In vantage@yahoogroups .com <mailto:vantage% 40yahoogroups. com>
<mailto:vantage% 40yahoogroups. com> ,
Robert Brown <robertb_versa@ ...> wrote:

>
> Kersten,
>
> Would you mind uploading the xml of your customization (or perhaps

just the text of any .NET code) to the files section?

>
> We are right in the midst of reviewing our QC related transaction

processes and a hearty request was made to enable multiple
non-conformance reason codes.

>
> Rob Brown
>
> --- On Mon, 9/15/08, Kersten MacLennan <kmaclennan@ ...> wrote:
> From: Kersten MacLennan <kmaclennan@ ...>
> Subject: RE: [Vantage] MES - how do you enter multiple reason codes

for nonconformance

> To: vantage@yahoogroups .com <mailto:vantage% 40yahoogroups. com>

<mailto:vantage% 40yahoogroups. com>

> Date: Monday, September 15, 2008, 4:35 PM
>
>
>
>
>
>
>
>
>
>
>
> I ended up customizing the whole form so we could enter multiple
>
> reasons. I know this has been submitted as an enhancement request but
>
> I'm not holding my breath. I have implemented some of the UD fields

and

>
> defined each to mean a particular reason
>
>
>
>
>
> Kersten MacLennan
>
> IT/ERP Analyst
>
> Semrock, Inc.
>
> 3625 Buffalo Rd.,
>
> Suite 6
>
> Rochester, NY 14624
>
>
>
> fax
>
>
>
> kmaclennan@semrock. com
>
>
>
> The Standard in Optical Filters for Biotech & Analytical

Instrumentation

>
>
>
> Hundreds of Thousands of Ion Beam Sputtered filters delivered -
>
> extensive inventory now!
>
>
>
> The information contained in this message and any attachments may be
>
> privileged, confidential, and protected from disclosure. If the reader
>
> of this message is not the intended recipient, or any agent

responsible

>
> for delivering this message to the intended recipient, you are hereby
>
> notified that any dissemination, distribution, or copying of this
>
> communication may be unlawful and therefore strictly prohibited. If

you

>
> received this message in error, please reply to the message and delete
>
> it. Thank you
>
>
>
> ____________ _________ _________ __
>
>
>
> From: vantage@yahoogroups .com [mailto:vantage@ yahoogroups .com] On

Behalf

>
> Of Dawn Stenbol
>
> Sent: Monday, September 15, 2008 3:23 PM
>
> To: vantage@yahoogroups .com
>
> Subject: [Vantage] MES - how do you enter multiple reason codes for
>
> nonconformance
>
>
>
> Hi everyone. In MES, when ending Production activity, how do others
>
> account for multiple nonconformance reasons (i.e. 2 parts have

porosity

>
> issues, 3 parts have pits). Epicor said we need to end out of activity
>
> and log back into that job to enter each nonconformance reason. This
>
> doesn't seem efficient nor does it seem like it would accurately

reflect

>
> that amount of time an employee has worked on each of the parts. The
>
> first reason group would show accurate begin and end times; the
>
> subsequent reason groups would show a quick log in and log out only.

Any

>
> suggestions are welcome. Thanks.
>
>
>
> Dawn Stenbol
>
>
>
> Wiza Industries.
>
>
>
> Muskego, WI 53150
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> [Non-text portions of this message have been removed]
>

[Non-text portions of this message have been removed]

------------ --------- --------- ------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups. yahoo.com/ group/vantage/ files/.
<http://groups. yahoo.com/ group/vantage/ files/>
(2) To search through old msg's goto:
http://groups. yahoo.com/ group/vantage/ messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups. yahoo.com/ group/vantage/ linksYahoo! Groups Links

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

system · September 12, 2008, 3:21pm

I've posted a couple messages today that I have not seen come into my inbox. And I have seen several response postings to other subjects that are in response to postings that I never saw the original of. Something seems odd about the Yahoo system or else perhaps my spam filtering layers are clobbering things. But *@yahoogroups.com<mailto:*@yahoogroups.com> is safelisted in all the layers so I am not exactly sure where it might be. OR...maybe Yahoo is blacklisting my posts again.

Could someone (just one is enough) please confirm receipt of messages from me earlier today (specifically a question about Test Databases and a response on the Internet Usage question. Of course....if I don't see this one either and nobody responds I'll have to contact Shirley off-list to get "restored" to Yahoo's good graces.

Thanks,
Todd Caughey
Harvey Vogel Mfg. Co.

[Non-text portions of this message have been removed]

system · September 12, 2008, 3:22pm

OK..I will confirm for my self this one at least. So must not be blacklisted by Yahoo.

________________________________
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Todd Caughey
Sent: Friday, September 12, 2008 2:21 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Group postings question

I've posted a couple messages today that I have not seen come into my inbox. And I have seen several response postings to other subjects that are in response to postings that I never saw the original of. Something seems odd about the Yahoo system or else perhaps my spam filtering layers are clobbering things. But *@yahoogroups.com<mailto:%2A%40yahoogroups.com><mailto:*@yahoogroups.com<mailto:%2A%40yahoogroups.com>> is safelisted in all the layers so I am not exactly sure where it might be. OR...maybe Yahoo is blacklisting my posts again.

Could someone (just one is enough) please confirm receipt of messages from me earlier today (specifically a question about Test Databases and a response on the Internet Usage question. Of course....if I don't see this one either and nobody responds I'll have to contact Shirley off-list to get "restored" to Yahoo's good graces.

Thanks,
Todd Caughey
Harvey Vogel Mfg. Co.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

system · September 12, 2008, 3:32pm

Todd,

I saw two come from you today other than this topic.

Edward F. Fox, Jr., CPA

Controller

Maxson Automatic Machinery Company

Phone 401-596-0162 a Fax 401-596-1050

www.maxsonautomatic.com

_____

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Todd Caughey
Sent: Friday, September 12, 2008 3:22 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Group postings question

OK..I will confirm for my self this one at least. So must not be blacklisted
by Yahoo.

________________________________
From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf Of Todd Caughey
Sent: Friday, September 12, 2008 2:21 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: [Vantage] Group postings question

I've posted a couple messages today that I have not seen come into my inbox.
And I have seen several response postings to other subjects that are in
response to postings that I never saw the original of. Something seems odd
about the Yahoo system or else perhaps my spam filtering layers are
clobbering things. But *@yahoogroups. <mailto:%2A%40yahoogroups.com>
com<mailto:%2A%40yahoogroups.com><mailto:*@yahoogroups.
<mailto:%2A%40yahoogroups.com> com<mailto:%2A%40yahoogroups.com>> is
safelisted in all the layers so I am not exactly sure where it might be.
OR...maybe Yahoo is blacklisting my posts again.

Could someone (just one is enough) please confirm receipt of messages from
me earlier today (specifically a question about Test Databases and a
response on the Internet Usage question. Of course....if I don't see this
one either and nobody responds I'll have to contact Shirley off-list to get
"restored" to Yahoo's good graces.

Thanks,
Todd Caughey
Harvey Vogel Mfg. Co.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

system · September 12, 2008, 3:39pm

OK thanks. Something here is clobbering messages then. Good to know for sure before I go and try chasing it down.

________________________________
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Edward F. Fox, Jr.
Sent: Friday, September 12, 2008 2:33 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Group postings question

Todd,

I saw two come from you today other than this topic.

Edward F. Fox, Jr., CPA

Controller

Maxson Automatic Machinery Company

Phone 401-596-0162 a Fax 401-596-1050

www.maxsonautomatic.com

_____

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf Of
Todd Caughey
Sent: Friday, September 12, 2008 3:22 PM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] Group postings question

OK..I will confirm for my self this one at least. So must not be blacklisted
by Yahoo.

________________________________
From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf Of Todd Caughey
Sent: Friday, September 12, 2008 2:21 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: [Vantage] Group postings question

I've posted a couple messages today that I have not seen come into my inbox.
And I have seen several response postings to other subjects that are in
response to postings that I never saw the original of. Something seems odd
about the Yahoo system or else perhaps my spam filtering layers are
clobbering things. But *@yahoogroups. <mailto:%2A%40yahoogroups.com>
com<mailto:%2A%40yahoogroups.com><mailto:*@yahoogroups.
<mailto:%2A%40yahoogroups.com> com<mailto:%2A%40yahoogroups.com>> is
safelisted in all the layers so I am not exactly sure where it might be.
OR...maybe Yahoo is blacklisting my posts again.

Could someone (just one is enough) please confirm receipt of messages from
me earlier today (specifically a question about Test Databases and a
response on the Internet Usage question. Of course....if I don't see this
one either and nobody responds I'll have to contact Shirley off-list to get
"restored" to Yahoo's good graces.

Thanks,
Todd Caughey
Harvey Vogel Mfg. Co.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

system · September 12, 2008, 3:55pm

Todd:

I also posted a message today. It never reached my inbox either. I
thought that my posting didn't "send" until I saw replies from this
group.

Whatever is happening to you is also happening to me.

Lynn

--- In vantage@yahoogroups.com, Todd Caughey <caugheyt@...> wrote:
>
> I've posted a couple messages today that I have not seen come into
my inbox. And I have seen several response postings to other
subjects that are in response to postings that I never saw the
original of. Something seems odd about the Yahoo system or else
perhaps my spam filtering layers are clobbering things. But
*@yahoogroups.com<mailto:*@yahoogroups.com> is safelisted in all the
layers so I am not exactly sure where it might be. OR...maybe Yahoo
is blacklisting my posts again.
>
> Could someone (just one is enough) please confirm receipt of
messages from me earlier today (specifically a question about Test
Databases and a response on the Internet Usage question. Of
course....if I don't see this one either and nobody responds I'll
have to contact Shirley off-list to get "restored" to Yahoo's good
graces.
>
> Thanks,
> Todd Caughey
> Harvey Vogel Mfg. Co.
>
>
> [Non-text portions of this message have been removed]
>

system · September 12, 2008, 6:36pm

We are running a spam filtering package that does not allow my
YahooGroup emails to be returned to me.

I do get a message that it was blocked.

This is by design according to the security group.

Dale Schuerman
Senior Consultant

RAM Software Systems, Inc.
1701 North Collins Suite 200
Richardson, Texas 75080
Phone: (972) 669-0763
Fax: (972) 669-9603
Web Site: www.ramsys.com <blocked::http://www.ramsys.com/>

________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Lynn
Sent: Friday, September 12, 2008 2:55 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: Group postings question

Todd:

I also posted a message today. It never reached my inbox either. I
thought that my posting didn't "send" until I saw replies from this
group.

Whatever is happening to you is also happening to me.

Lynn

--- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> , Todd
Caughey <caugheyt@...> wrote:

>
> I've posted a couple messages today that I have not seen come into

my inbox. And I have seen several response postings to other
subjects that are in response to postings that I never saw the
original of. Something seems odd about the Yahoo system or else
perhaps my spam filtering layers are clobbering things. But
*@yahoogroups.com <mailto:%2A%40yahoogroups.com>
<mailto:*@yahoogroups.com <mailto:%2A%40yahoogroups.com> > is safelisted
in all the
layers so I am not exactly sure where it might be. OR...maybe Yahoo
is blacklisting my posts again.

>
> Could someone (just one is enough) please confirm receipt of

messages from me earlier today (specifically a question about Test
Databases and a response on the Internet Usage question. Of
course....if I don't see this one either and nobody responds I'll
have to contact Shirley off-list to get "restored" to Yahoo's good
graces.

>
> Thanks,
> Todd Caughey
> Harvey Vogel Mfg. Co.
>
>
> [Non-text portions of this message have been removed]
>

[Non-text portions of this message have been removed]

system · September 12, 2008, 10:16pm

We just installed a Barracuda Spam device and are in the process of implementing email archiving (legal thing). Because of the archiving issue (did not want the yahoo group emails being archived) I moved my email to a personal subaccount that I have with yahoo. I then set up Windows Mail (running Vista) as a POP3 account to receive the group email versus my Exchange account. This eliminates the need to set up special rules for spam control and keeps the emails from being archived since they are really not emails directed to our company.

Just a suggestion.

----- Original Message -----
From: Dale Schuerman
To: vantage@yahoogroups.com
Sent: Friday, September 12, 2008 5:43 PM
Subject: RE: [Vantage] Re: Group postings question

We are running a spam filtering package that does not allow my
YahooGroup emails to be returned to me.

I do get a message that it was blocked.

This is by design according to the security group.

Dale Schuerman
Senior Consultant

RAM Software Systems, Inc.
1701 North Collins Suite 200
Richardson, Texas 75080
Phone: (972) 669-0763
Fax: (972) 669-9603
Web Site: www.ramsys.com <blocked::http://www.ramsys.com/>

________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Lynn
Sent: Friday, September 12, 2008 2:55 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: Group postings question

Todd:

I also posted a message today. It never reached my inbox either. I
thought that my posting didn't "send" until I saw replies from this
group.

Whatever is happening to you is also happening to me.

Lynn

--- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> , Todd
Caughey <caugheyt@...> wrote:
>
> I've posted a couple messages today that I have not seen come into
my inbox. And I have seen several response postings to other
subjects that are in response to postings that I never saw the
original of. Something seems odd about the Yahoo system or else
perhaps my spam filtering layers are clobbering things. But
*@yahoogroups.com <mailto:%2A%40yahoogroups.com>
<mailto:*@yahoogroups.com <mailto:%2A%40yahoogroups.com> > is safelisted
in all the
layers so I am not exactly sure where it might be. OR...maybe Yahoo
is blacklisting my posts again.
>
> Could someone (just one is enough) please confirm receipt of
messages from me earlier today (specifically a question about Test
Databases and a response on the Internet Usage question. Of
course....if I don't see this one either and nobody responds I'll
have to contact Shirley off-list to get "restored" to Yahoo's good
graces.
>
> Thanks,
> Todd Caughey
> Harvey Vogel Mfg. Co.
>
>
> [Non-text portions of this message have been removed]
>

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

system · September 13, 2008, 11:29am

Personally, for an inexpensive options, I use gmail for my email here in this
group and a few others not related to vantage. I find it to be extremely useful
since I then forward the emails from Gmail to my ISP account where I get them
POP3 to read right away, but the way Gmail stores and sorts emails makes it very
easy to view an entire thread without having to sort through and find the
individual email that started it, and the search capability within Gmail is
great for researching emails from the past for answers, plus the enormous amount
of space you get for free instead of paying for it with POP3 access at yahoo or
another email service.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Charles Carden
Sent: Friday, September 12, 2008 10:17 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Re: Group postings question

We just installed a Barracuda Spam device and are in the process of implementing
email archiving (legal thing). Because of the archiving issue (did not want the
yahoo group emails being archived) I moved my email to a personal subaccount
that I have with yahoo. I then set up Windows Mail (running Vista) as a POP3
account to receive the group email versus my Exchange account. This eliminates
the need to set up special rules for spam control and keeps the emails from
being archived since they are really not emails directed to our company.

Just a suggestion.

----- Original Message -----
From: Dale Schuerman
To: vantage@yahoogroups.com
Sent: Friday, September 12, 2008 5:43 PM
Subject: RE: [Vantage] Re: Group postings question

We are running a spam filtering package that does not allow my
YahooGroup emails to be returned to me.

I do get a message that it was blocked.

This is by design according to the security group.

Dale Schuerman
Senior Consultant

RAM Software Systems, Inc.
1701 North Collins Suite 200
Richardson, Texas 75080
Phone: (972) 669-0763
Fax: (972) 669-9603
Web Site: www.ramsys.com <blocked::http://www.ramsys.com/>

________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Lynn
Sent: Friday, September 12, 2008 2:55 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: Group postings question

Todd:

I also posted a message today. It never reached my inbox either. I
thought that my posting didn't "send" until I saw replies from this
group.

Whatever is happening to you is also happening to me.

Lynn

--- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> , Todd
Caughey <caugheyt@...> wrote:
>
> I've posted a couple messages today that I have not seen come into
my inbox. And I have seen several response postings to other
subjects that are in response to postings that I never saw the
original of. Something seems odd about the Yahoo system or else
perhaps my spam filtering layers are clobbering things. But
*@yahoogroups.com <mailto:%2A%40yahoogroups.com>
<mailto:*@yahoogroups.com <mailto:%2A%40yahoogroups.com> > is safelisted
in all the
layers so I am not exactly sure where it might be. OR...maybe Yahoo
is blacklisting my posts again.
>
> Could someone (just one is enough) please confirm receipt of
messages from me earlier today (specifically a question about Test
Databases and a response on the Internet Usage question. Of
course....if I don't see this one either and nobody responds I'll
have to contact Shirley off-list to get "restored" to Yahoo's good
graces.
>
> Thanks,
> Todd Caughey
> Harvey Vogel Mfg. Co.
>
>
> [Non-text portions of this message have been removed]
>

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

system · September 15, 2008, 3:24pm

Hi everyone. In MES, when ending Production activity, how do others
account for multiple nonconformance reasons (i.e. 2 parts have porosity
issues, 3 parts have pits). Epicor said we need to end out of activity
and log back into that job to enter each nonconformance reason. This
doesn't seem efficient nor does it seem like it would accurately reflect
that amount of time an employee has worked on each of the parts. The
first reason group would show accurate begin and end times; the
subsequent reason groups would show a quick log in and log out only. Any
suggestions are welcome. Thanks.

Dawn Stenbol

Wiza Industries.

Muskego, WI 53150

[Non-text portions of this message have been removed]

system · September 15, 2008, 4:35pm

I ended up customizing the whole form so we could enter multiple
reasons. I know this has been submitted as an enhancement request but
I'm not holding my breath. I have implemented some of the UD fields and
defined each to mean a particular reason

Kersten MacLennan
IT/ERP Analyst
Semrock, Inc.
3625 Buffalo Rd.,
Suite 6
Rochester, NY 14624
585-594-7009
585-594-7095 fax

kmaclennan@...

The Standard in Optical Filters for Biotech & Analytical Instrumentation

Hundreds of Thousands of Ion Beam Sputtered filters delivered -
extensive inventory now!

The information contained in this message and any attachments may be
privileged, confidential, and protected from disclosure. If the reader
of this message is not the intended recipient, or any agent responsible
for delivering this message to the intended recipient, you are hereby
notified that any dissemination, distribution, or copying of this
communication may be unlawful and therefore strictly prohibited. If you
received this message in error, please reply to the message and delete
it. Thank you

________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Dawn Stenbol
Sent: Monday, September 15, 2008 3:23 PM
To: vantage@yahoogroups.com
Subject: [Vantage] MES - how do you enter multiple reason codes for
nonconformance

Hi everyone. In MES, when ending Production activity, how do others
account for multiple nonconformance reasons (i.e. 2 parts have porosity
issues, 3 parts have pits). Epicor said we need to end out of activity
and log back into that job to enter each nonconformance reason. This
doesn't seem efficient nor does it seem like it would accurately reflect
that amount of time an employee has worked on each of the parts. The
first reason group would show accurate begin and end times; the
subsequent reason groups would show a quick log in and log out only. Any
suggestions are welcome. Thanks.

Dawn Stenbol

Wiza Industries.

Muskego, WI 53150

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

system · September 15, 2008, 8:27pm

Kersten,

Would you mind uploading the xml of your customization (or perhaps just the text of any .NET code) to the files section?

We are right in the midst of reviewing our QC related transaction processes and a hearty request was made to enable multiple non-conformance reason codes.

Rob Brown

--- On Mon, 9/15/08, Kersten MacLennan <kmaclennan@...> wrote:
From: Kersten MacLennan <kmaclennan@...>
Subject: RE: [Vantage] MES - how do you enter multiple reason codes for nonconformance
To: vantage@yahoogroups.com
Date: Monday, September 15, 2008, 4:35 PM

I ended up customizing the whole form so we could enter multiple

reasons. I know this has been submitted as an enhancement request but

I'm not holding my breath. I have implemented some of the UD fields and

defined each to mean a particular reason

Kersten MacLennan

IT/ERP Analyst

Semrock, Inc.

3625 Buffalo Rd.,

Suite 6

Rochester, NY 14624

fax

kmaclennan@semrock. com

The Standard in Optical Filters for Biotech & Analytical Instrumentation

Hundreds of Thousands of Ion Beam Sputtered filters delivered -

extensive inventory now!

The information contained in this message and any attachments may be

privileged, confidential, and protected from disclosure. If the reader

of this message is not the intended recipient, or any agent responsible

for delivering this message to the intended recipient, you are hereby

notified that any dissemination, distribution, or copying of this

communication may be unlawful and therefore strictly prohibited. If you

received this message in error, please reply to the message and delete

it. Thank you

____________ _________ _________ __

From: vantage@yahoogroups .com [mailto:vantage@yahoogroups .com] On Behalf

Of Dawn Stenbol

Sent: Monday, September 15, 2008 3:23 PM

To: vantage@yahoogroups .com

Subject: [Vantage] MES - how do you enter multiple reason codes for

nonconformance

Hi everyone. In MES, when ending Production activity, how do others

account for multiple nonconformance reasons (i.e. 2 parts have porosity

issues, 3 parts have pits). Epicor said we need to end out of activity

and log back into that job to enter each nonconformance reason. This

doesn't seem efficient nor does it seem like it would accurately reflect

that amount of time an employee has worked on each of the parts. The

first reason group would show accurate begin and end times; the

subsequent reason groups would show a quick log in and log out only. Any

suggestions are welcome. Thanks.

Dawn Stenbol

Wiza Industries.

Muskego, WI 53150

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

system · September 16, 2008, 1:56am

I would also be interested in this as we have a very similar issue...

Could I ask what version of Vantage you are running...? We remain on
8.03.305...

Many thanks,

Nick

--- In vantage@yahoogroups.com, Robert Brown <robertb_versa@...>
wrote:

>
> Kersten,
>
> Would you mind uploading the xml of your customization (or perhaps

just the text of any .NET code) to the files section?

>
> We are right in the midst of reviewing our QC related transaction

processes and a hearty request was made to enable multiple non-
conformance reason codes.

>
> Rob Brown
>
> --- On Mon, 9/15/08, Kersten MacLennan <kmaclennan@...> wrote:
> From: Kersten MacLennan <kmaclennan@...>
> Subject: RE: [Vantage] MES - how do you enter multiple reason codes

for nonconformance

> To: vantage@yahoogroups.com
> Date: Monday, September 15, 2008, 4:35 PM
>
>
>
>
>
>
>
>
>
>
>
> I ended up customizing the whole form so we could enter

multiple

>
> reasons. I know this has been submitted as an enhancement request

but

>
> I'm not holding my breath. I have implemented some of the UD fields

and

>
> defined each to mean a particular reason
>
>
>
>
>
> Kersten MacLennan
>
> IT/ERP Analyst
>
> Semrock, Inc.
>
> 3625 Buffalo Rd.,
>
> Suite 6
>
> Rochester, NY 14624
>
>
>
> fax
>
>
>
> kmaclennan@semrock. com
>
>
>
> The Standard in Optical Filters for Biotech & Analytical

Instrumentation

>
>
>
> Hundreds of Thousands of Ion Beam Sputtered filters delivered -
>
> extensive inventory now!
>
>
>
> The information contained in this message and any attachments may be
>
> privileged, confidential, and protected from disclosure. If the

reader

>
> of this message is not the intended recipient, or any agent

responsible

>
> for delivering this message to the intended recipient, you are

hereby

>
> notified that any dissemination, distribution, or copying of this
>
> communication may be unlawful and therefore strictly prohibited. If

you

>
> received this message in error, please reply to the message and

delete

>
> it. Thank you
>
>
>
> ____________ _________ _________ __
>
>
>
> From: vantage@yahoogroups .com [mailto:vantage@yahoogroups .com] On

Behalf

>
> Of Dawn Stenbol
>
> Sent: Monday, September 15, 2008 3:23 PM
>
> To: vantage@yahoogroups .com
>
> Subject: [Vantage] MES - how do you enter multiple reason codes for
>
> nonconformance
>
>
>
> Hi everyone. In MES, when ending Production activity, how do others
>
> account for multiple nonconformance reasons (i.e. 2 parts have

porosity

>
> issues, 3 parts have pits). Epicor said we need to end out of

activity

>
> and log back into that job to enter each nonconformance reason. This
>
> doesn't seem efficient nor does it seem like it would accurately

reflect

>
> that amount of time an employee has worked on each of the parts. The
>
> first reason group would show accurate begin and end times; the
>
> subsequent reason groups would show a quick log in and log out

only. Any

>
> suggestions are welcome. Thanks.
>
>
>
> Dawn Stenbol
>
>
>
> Wiza Industries.
>
>
>
> Muskego, WI 53150
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> [Non-text portions of this message have been removed]
>

system · September 16, 2008, 9:45am

Thanks. When you use the UD fields were you able to tie them into the
nonconformance screens for disposition? Do they follow through to DMR
too?

Dawn Stenbol

IT Manager

Wiza Industries.

S82 W8762 Gemini Dr.

Muskego, WI 53150

262-679-4600 ext 133

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Kersten MacLennan
Sent: Monday, September 15, 2008 3:36 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] MES - how do you enter multiple reason codes for
nonconformance

I ended up customizing the whole form so we could enter multiple
reasons. I know this has been submitted as an enhancement request but
I'm not holding my breath. I have implemented some of the UD fields and
defined each to mean a particular reason

Kersten MacLennan
IT/ERP Analyst
Semrock, Inc.
3625 Buffalo Rd.,
Suite 6
Rochester, NY 14624
585-594-7009
585-594-7095 fax

kmaclennan@... <mailto:kmaclennan%40semrock.com>

The Standard in Optical Filters for Biotech & Analytical Instrumentation

Hundreds of Thousands of Ion Beam Sputtered filters delivered -
extensive inventory now!

The information contained in this message and any attachments may be
privileged, confidential, and protected from disclosure. If the reader
of this message is not the intended recipient, or any agent responsible
for delivering this message to the intended recipient, you are hereby
notified that any dissemination, distribution, or copying of this
communication may be unlawful and therefore strictly prohibited. If you
received this message in error, please reply to the message and delete
it. Thank you

________________________________

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf
Of Dawn Stenbol
Sent: Monday, September 15, 2008 3:23 PM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: [Vantage] MES - how do you enter multiple reason codes for
nonconformance

Hi everyone. In MES, when ending Production activity, how do others
account for multiple nonconformance reasons (i.e. 2 parts have porosity
issues, 3 parts have pits). Epicor said we need to end out of activity
and log back into that job to enter each nonconformance reason. This
doesn't seem efficient nor does it seem like it would accurately reflect
that amount of time an employee has worked on each of the parts. The
first reason group would show accurate begin and end times; the
subsequent reason groups would show a quick log in and log out only. Any
suggestions are welcome. Thanks.

Dawn Stenbol

Wiza Industries.

Muskego, WI 53150

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

system · September 16, 2008, 1:16pm

No they are just the text fields in the labor detail table. I have then
created a report that can extract various information from it.

Kersten MacLennan
IT/ERP Analyst
Semrock, Inc.
3625 Buffalo Rd.,
Suite 6
Rochester, NY 14624
585-594-7009
585-594-7095 fax

kmaclennan@...

The Standard in Optical Filters for Biotech & Analytical Instrumentation

Hundreds of Thousands of Ion Beam Sputtered filters delivered -
extensive inventory now!

The information contained in this message and any attachments may be
privileged, confidential, and protected from disclosure. If the reader
of this message is not the intended recipient, or any agent responsible
for delivering this message to the intended recipient, you are hereby
notified that any dissemination, distribution, or copying of this
communication may be unlawful and therefore strictly prohibited. If you
received this message in error, please reply to the message and delete
it. Thank you

________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Dawn Stenbol
Sent: Tuesday, September 16, 2008 9:45 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] MES - how do you enter multiple reason codes for
nonconformance

Thanks. When you use the UD fields were you able to tie them into the
nonconformance screens for disposition? Do they follow through to DMR
too?

Dawn Stenbol

IT Manager

Wiza Industries.

S82 W8762 Gemini Dr.

Muskego, WI 53150

262-679-4600 ext 133

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf
Of Kersten MacLennan
Sent: Monday, September 15, 2008 3:36 PM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] MES - how do you enter multiple reason codes for
nonconformance

I ended up customizing the whole form so we could enter multiple
reasons. I know this has been submitted as an enhancement request but
I'm not holding my breath. I have implemented some of the UD fields and
defined each to mean a particular reason

Kersten MacLennan
IT/ERP Analyst
Semrock, Inc.
3625 Buffalo Rd.,
Suite 6
Rochester, NY 14624
585-594-7009
585-594-7095 fax

kmaclennan@... <mailto:kmaclennan%40semrock.com>
<mailto:kmaclennan%40semrock.com>

The Standard in Optical Filters for Biotech & Analytical Instrumentation

Hundreds of Thousands of Ion Beam Sputtered filters delivered -
extensive inventory now!

The information contained in this message and any attachments may be
privileged, confidential, and protected from disclosure. If the reader
of this message is not the intended recipient, or any agent responsible
for delivering this message to the intended recipient, you are hereby
notified that any dissemination, distribution, or copying of this
communication may be unlawful and therefore strictly prohibited. If you
received this message in error, please reply to the message and delete
it. Thank you

________________________________

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> ] On
Behalf
Of Dawn Stenbol
Sent: Monday, September 15, 2008 3:23 PM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
Subject: [Vantage] MES - how do you enter multiple reason codes for
nonconformance

Hi everyone. In MES, when ending Production activity, how do others
account for multiple nonconformance reasons (i.e. 2 parts have porosity
issues, 3 parts have pits). Epicor said we need to end out of activity
and log back into that job to enter each nonconformance reason. This
doesn't seem efficient nor does it seem like it would accurately reflect
that amount of time an employee has worked on each of the parts. The
first reason group would show accurate begin and end times; the
subsequent reason groups would show a quick log in and log out only. Any
suggestions are welcome. Thanks.

Dawn Stenbol

Wiza Industries.

Muskego, WI 53150

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

system · July 8, 2009, 5:16pm

I'm being asked about the very same issue here.

Can folks chime in on where they've wound up?

I basically want to be able to have operators report multiple reason codes and associated quantities for scrap at the end of an operation so we can do statistical analysis on the data later.

--- In vantage@yahoogroups.com, Robert Brown <robertb_versa@...> wrote:
>
> Kersten,
>
> Would you mind uploading the xml of your customization (or perhaps just the text of any .NET code) to the files section?
>
> We are right in the midst of reviewing our QC related transaction processes and a hearty request was made to enable multiple non-conformance reason codes.
>
> Rob Brown
>
> --- On Mon, 9/15/08, Kersten MacLennan <kmaclennan@...> wrote:
> From: Kersten MacLennan <kmaclennan@...>
> Subject: RE: [Vantage] MES - how do you enter multiple reason codes for nonconformance
> To: vantage@yahoogroups.com
> Date: Monday, September 15, 2008, 4:35 PM
>
>
>
>
>
>
>
>
>
>
>
> I ended up customizing the whole form so we could enter multiple
>
> reasons. I know this has been submitted as an enhancement request but
>
> I'm not holding my breath. I have implemented some of the UD fields and
>
> defined each to mean a particular reason
>
>
>
>
>
> Kersten MacLennan
>
> IT/ERP Analyst
>
> Semrock, Inc.
>
> 3625 Buffalo Rd.,
>
> Suite 6
>
> Rochester, NY 14624
>
>
>
> fax
>
>
>
> kmaclennan@semrock. com
>
>
>
> The Standard in Optical Filters for Biotech & Analytical Instrumentation
>
>
>
> Hundreds of Thousands of Ion Beam Sputtered filters delivered -
>
> extensive inventory now!
>
>
>
> The information contained in this message and any attachments may be
>
> privileged, confidential, and protected from disclosure. If the reader
>
> of this message is not the intended recipient, or any agent responsible
>
> for delivering this message to the intended recipient, you are hereby
>
> notified that any dissemination, distribution, or copying of this
>
> communication may be unlawful and therefore strictly prohibited. If you
>
> received this message in error, please reply to the message and delete
>
> it. Thank you
>
>
>
> ____________ _________ _________ __
>
>
>
> From: vantage@yahoogroups .com [mailto:vantage@yahoogroups .com] On Behalf
>
> Of Dawn Stenbol
>
> Sent: Monday, September 15, 2008 3:23 PM
>
> To: vantage@yahoogroups .com
>
> Subject: [Vantage] MES - how do you enter multiple reason codes for
>
> nonconformance
>
>
>
> Hi everyone. In MES, when ending Production activity, how do others
>
> account for multiple nonconformance reasons (i.e. 2 parts have porosity
>
> issues, 3 parts have pits). Epicor said we need to end out of activity
>
> and log back into that job to enter each nonconformance reason. This
>
> doesn't seem efficient nor does it seem like it would accurately reflect
>
> that amount of time an employee has worked on each of the parts. The
>
> first reason group would show accurate begin and end times; the
>
> subsequent reason groups would show a quick log in and log out only. Any
>
> suggestions are welcome. Thanks.
>
>
>
> Dawn Stenbol
>
>
>
> Wiza Industries.
>
>
>
> Muskego, WI 53150
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> [Non-text portions of this message have been removed]
>

system · July 8, 2009, 5:32pm

Seems to me the way they have that set up its pretty much a one to one
relationship. I had to look at that from a similar thought process but
revolving around the blame game and tying multiple operators to a
nonconformance which is stored in the same table. Though I haven't
gotten to it I was going to use a UD table and integrate it for that
purpose to create my one to many relationship. Not very ideal, but...

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Brian W. Spolarich
Sent: Wednesday, July 08, 2009 4:17 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: MES - how do you enter multiple reason codes for
nonconformance

I'm being asked about the very same issue here.

Can folks chime in on where they've wound up?

I basically want to be able to have operators report multiple reason
codes and associated quantities for scrap at the end of an operation so
we can do statistical analysis on the data later.

--- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ,
Robert Brown <robertb_versa@...> wrote:

>
> Kersten,
>
> Would you mind uploading the xml of your customization (or perhaps

just the text of any .NET code) to the files section?

>
> We are right in the midst of reviewing our QC related transaction

processes and a hearty request was made to enable multiple
non-conformance reason codes.

>
> Rob Brown
>
> --- On Mon, 9/15/08, Kersten MacLennan <kmaclennan@...> wrote:
> From: Kersten MacLennan <kmaclennan@...>
> Subject: RE: [Vantage] MES - how do you enter multiple reason codes

for nonconformance

> To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> Date: Monday, September 15, 2008, 4:35 PM
>
>
>
>
>
>
>
>
>
>
>
> I ended up customizing the whole form so we could enter multiple
>
> reasons. I know this has been submitted as an enhancement request but
>
> I'm not holding my breath. I have implemented some of the UD fields

and

>
> defined each to mean a particular reason
>
>
>
>
>
> Kersten MacLennan
>
> IT/ERP Analyst
>
> Semrock, Inc.
>
> 3625 Buffalo Rd.,
>
> Suite 6
>
> Rochester, NY 14624
>
>
>
> fax
>
>
>
> kmaclennan@semrock. com
>
>
>
> The Standard in Optical Filters for Biotech & Analytical

Instrumentation

>
>
>
> Hundreds of Thousands of Ion Beam Sputtered filters delivered -
>
> extensive inventory now!
>
>
>
> The information contained in this message and any attachments may be
>
> privileged, confidential, and protected from disclosure. If the reader
>
> of this message is not the intended recipient, or any agent

responsible

>
> for delivering this message to the intended recipient, you are hereby
>
> notified that any dissemination, distribution, or copying of this
>
> communication may be unlawful and therefore strictly prohibited. If

you

>
> received this message in error, please reply to the message and delete
>
> it. Thank you
>
>
>
> ____________ _________ _________ __
>
>
>
> From: vantage@yahoogroups .com [mailto:vantage@yahoogroups .com] On

Behalf

>
> Of Dawn Stenbol
>
> Sent: Monday, September 15, 2008 3:23 PM
>
> To: vantage@yahoogroups .com
>
> Subject: [Vantage] MES - how do you enter multiple reason codes for
>
> nonconformance
>
>
>
> Hi everyone. In MES, when ending Production activity, how do others
>
> account for multiple nonconformance reasons (i.e. 2 parts have

porosity

>
> issues, 3 parts have pits). Epicor said we need to end out of activity
>
> and log back into that job to enter each nonconformance reason. This
>
> doesn't seem efficient nor does it seem like it would accurately

reflect

>
> that amount of time an employee has worked on each of the parts. The
>
> first reason group would show accurate begin and end times; the
>
> subsequent reason groups would show a quick log in and log out only.

Any

>
> suggestions are welcome. Thanks.
>
>
>
> Dawn Stenbol
>
>
>
> Wiza Industries.
>
>
>
> Muskego, WI 53150
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> [Non-text portions of this message have been removed]
>

[Non-text portions of this message have been removed]

system · July 8, 2009, 5:38pm

That's my thought as well. I had hoped someone had already accomplished this and would be willing to share. :-)

--
Brian W. Spolarich ~ Manager, Information Services ~ Advanced Photonix / Picometrix
Â Â Â Â bspolarich@... ~ 734-864-5618 ~ www.advancedphotonix.com

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Rob Bucek
Sent: Wednesday, July 08, 2009 5:29 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Re: MES - how do you enter multiple reason codes for nonconformance

Seems to me the way they have that set up its pretty much a one to one
relationship. I had to look at that from a similar thought process but
revolving around the blame game and tying multiple operators to a
nonconformance which is stored in the same table. Though I haven't
gotten to it I was going to use a UD table and integrate it for that
purpose to create my one to many relationship. Not very ideal, but...

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Brian W. Spolarich
Sent: Wednesday, July 08, 2009 4:17 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: MES - how do you enter multiple reason codes for
nonconformance

I'm being asked about the very same issue here.

Can folks chime in on where they've wound up?

I basically want to be able to have operators report multiple reason
codes and associated quantities for scrap at the end of an operation so
we can do statistical analysis on the data later.

--- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ,
Robert Brown <robertb_versa@...> wrote:

>
> Kersten,
>
> Would you mind uploading the xml of your customization (or perhaps

just the text of any .NET code) to the files section?

>
> We are right in the midst of reviewing our QC related transaction

processes and a hearty request was made to enable multiple
non-conformance reason codes.

>
> Rob Brown
>
> --- On Mon, 9/15/08, Kersten MacLennan <kmaclennan@...> wrote:
> From: Kersten MacLennan <kmaclennan@...>
> Subject: RE: [Vantage] MES - how do you enter multiple reason codes

for nonconformance

> To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> Date: Monday, September 15, 2008, 4:35 PM
>
>
>
>
>
>
>
>
>
>
>
> I ended up customizing the whole form so we could enter multiple
>
> reasons. I know this has been submitted as an enhancement request but
>
> I'm not holding my breath. I have implemented some of the UD fields

and

>
> defined each to mean a particular reason
>
>
>
>
>
> Kersten MacLennan
>
> IT/ERP Analyst
>
> Semrock, Inc.
>
> 3625 Buffalo Rd.,
>
> Suite 6
>
> Rochester, NY 14624
>
>
>
> fax
>
>
>
> kmaclennan@semrock. com
>
>
>
> The Standard in Optical Filters for Biotech & Analytical

Instrumentation

>
>
>
> Hundreds of Thousands of Ion Beam Sputtered filters delivered -
>
> extensive inventory now!
>
>
>
> The information contained in this message and any attachments may be
>
> privileged, confidential, and protected from disclosure. If the reader
>
> of this message is not the intended recipient, or any agent

responsible

>
> for delivering this message to the intended recipient, you are hereby
>
> notified that any dissemination, distribution, or copying of this
>
> communication may be unlawful and therefore strictly prohibited. If

you

>
> received this message in error, please reply to the message and delete
>
> it. Thank you
>
>
>
> ____________ _________ _________ __
>
>
>
> From: vantage@yahoogroups .com [mailto:vantage@yahoogroups .com] On

Behalf

>
> Of Dawn Stenbol
>
> Sent: Monday, September 15, 2008 3:23 PM
>
> To: vantage@yahoogroups .com
>
> Subject: [Vantage] MES - how do you enter multiple reason codes for
>
> nonconformance
>
>
>
> Hi everyone. In MES, when ending Production activity, how do others
>
> account for multiple nonconformance reasons (i.e. 2 parts have

porosity

>
> issues, 3 parts have pits). Epicor said we need to end out of activity
>
> and log back into that job to enter each nonconformance reason. This
>
> doesn't seem efficient nor does it seem like it would accurately

reflect

>
> that amount of time an employee has worked on each of the parts. The
>
> first reason group would show accurate begin and end times; the
>
> subsequent reason groups would show a quick log in and log out only.

Any

>
> suggestions are welcome. Thanks.
>
>
>
> Dawn Stenbol
>
>
>
> Wiza Industries.
>
>
>
> Muskego, WI 53150
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> [Non-text portions of this message have been removed]
>

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

system · July 8, 2009, 5:51pm

Im not sure of your delivery time frame but I don't think ill get back
to it for several weeks at the very earliest...

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Brian W. Spolarich
Sent: Wednesday, July 08, 2009 4:36 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Re: MES - how do you enter multiple reason codes
for nonconformance

That's my thought as well. I had hoped someone had already accomplished
this and would be willing to share. :-)

--
Brian W. Spolarich ~ Manager, Information Services ~ Advanced Photonix /
Picometrix
bspolarich@...
<mailto:bspolarich%40advancedphotonix.com> ~ 734-864-5618 ~
www.advancedphotonix.com

-----Original Message-----
From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf Of Rob Bucek
Sent: Wednesday, July 08, 2009 5:29 PM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] Re: MES - how do you enter multiple reason codes
for nonconformance

Seems to me the way they have that set up its pretty much a one to one
relationship. I had to look at that from a similar thought process but
revolving around the blame game and tying multiple operators to a
nonconformance which is stored in the same table. Though I haven't
gotten to it I was going to use a UD table and integrate it for that
purpose to create my one to many relationship. Not very ideal, but...

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf
Of Brian W. Spolarich
Sent: Wednesday, July 08, 2009 4:17 PM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: [Vantage] Re: MES - how do you enter multiple reason codes for
nonconformance

I'm being asked about the very same issue here.

Can folks chime in on where they've wound up?

I basically want to be able to have operators report multiple reason
codes and associated quantities for scrap at the end of an operation so
we can do statistical analysis on the data later.

--- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> ,
Robert Brown <robertb_versa@...> wrote:

>
> Kersten,
>
> Would you mind uploading the xml of your customization (or perhaps

just the text of any .NET code) to the files section?

>
> We are right in the midst of reviewing our QC related transaction

processes and a hearty request was made to enable multiple
non-conformance reason codes.

>
> Rob Brown
>
> --- On Mon, 9/15/08, Kersten MacLennan <kmaclennan@...> wrote:
> From: Kersten MacLennan <kmaclennan@...>
> Subject: RE: [Vantage] MES - how do you enter multiple reason codes

for nonconformance

> To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>

<mailto:vantage%40yahoogroups.com>

> Date: Monday, September 15, 2008, 4:35 PM
>
>
>
>
>
>
>
>
>
>
>
> I ended up customizing the whole form so we could enter multiple
>
> reasons. I know this has been submitted as an enhancement request but
>
> I'm not holding my breath. I have implemented some of the UD fields

and

>
> defined each to mean a particular reason
>
>
>
>
>
> Kersten MacLennan
>
> IT/ERP Analyst
>
> Semrock, Inc.
>
> 3625 Buffalo Rd.,
>
> Suite 6
>
> Rochester, NY 14624
>
>
>
> fax
>
>
>
> kmaclennan@semrock. com
>
>
>
> The Standard in Optical Filters for Biotech & Analytical

Instrumentation

>
>
>
> Hundreds of Thousands of Ion Beam Sputtered filters delivered -
>
> extensive inventory now!
>
>
>
> The information contained in this message and any attachments may be
>
> privileged, confidential, and protected from disclosure. If the reader
>
> of this message is not the intended recipient, or any agent

responsible

>
> for delivering this message to the intended recipient, you are hereby
>
> notified that any dissemination, distribution, or copying of this
>
> communication may be unlawful and therefore strictly prohibited. If

you

>
> received this message in error, please reply to the message and delete
>
> it. Thank you
>
>
>
> ____________ _________ _________ __
>
>
>
> From: vantage@yahoogroups .com [mailto:vantage@yahoogroups .com] On

Behalf

>
> Of Dawn Stenbol
>
> Sent: Monday, September 15, 2008 3:23 PM
>
> To: vantage@yahoogroups .com
>
> Subject: [Vantage] MES - how do you enter multiple reason codes for
>
> nonconformance
>
>
>
> Hi everyone. In MES, when ending Production activity, how do others
>
> account for multiple nonconformance reasons (i.e. 2 parts have

porosity

>
> issues, 3 parts have pits). Epicor said we need to end out of activity
>
> and log back into that job to enter each nonconformance reason. This
>
> doesn't seem efficient nor does it seem like it would accurately

reflect

>
> that amount of time an employee has worked on each of the parts. The
>
> first reason group would show accurate begin and end times; the
>
> subsequent reason groups would show a quick log in and log out only.

Any

>
> suggestions are welcome. Thanks.
>
>
>
> Dawn Stenbol
>
>
>
> Wiza Industries.
>
>
>
> Muskego, WI 53150
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> [Non-text portions of this message have been removed]
>

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

[Non-text portions of this message have been removed]