# MRP Not given any suggestions **URL:** \ **Category:** Epicor ERP 9\ **Created:** [November 4, 2016, 4:34pm UTC](https://www.epiusers.help/t/mrp-not-given-any-suggestions/36098 "2016-11-04T16:34:14Z")\ **Posts on this page:** 18\ **Page:** 1
**Author:** ![MiguelS](https://www.epiusers.help/user_avatar/www.epiusers.help/miguels/32/99_2.png) [@MiguelS](https://www.epiusers.help/u/MiguelS)\ **Post date:** [November 4, 2016, 4:34pm UTC](https://www.epiusers.help/t/mrp-not-given-any-suggestions/36098/1 "2016-11-04T16:34:14Z")
Last night our server took a dump (restarted) about 5 minutes into MRP. I rebooted the server in the morning and ran MRP, it looks like it completed fine, but there are few suggestions. There is data in the PartDtl table, I verified a few Parts as well and they should have gone through. MRP logs indicate that the parts were processed, but just looks like it didnt know about the demand, Generate PO, Process MRP, Valid Moms are present. I do have an open call with EPICOR, but look for some other this to check. ---
**Author:** ![amaragni](https://www.epiusers.help/user_avatar/www.epiusers.help/amaragni/32/5766_2.png) [@amaragni](https://www.epiusers.help/u/amaragni)\ **Post date:** [November 4, 2016, 5:45pm UTC](https://www.epiusers.help/t/mrp-not-given-any-suggestions/36098/2 "2016-11-04T17:45:13Z")
Net Change or Regen? I would run FULL REGEN the next time. And don’t reuse ANY orders ---
**Author:** ![MiguelS](https://www.epiusers.help/user_avatar/www.epiusers.help/miguels/32/99_2.png) [@MiguelS](https://www.epiusers.help/u/MiguelS)\ **Post date:** [November 4, 2016, 5:49pm UTC](https://www.epiusers.help/t/mrp-not-given-any-suggestions/36098/3 "2016-11-04T17:49:11Z")
We only do Regen, ran NetChange to see if would reset some flag, then ran Regen, and same results. ---
**Author:** ![gpayne](https://www.epiusers.help/user_avatar/www.epiusers.help/gpayne/32/55751_2.png) [@gpayne](https://www.epiusers.help/u/gpayne)\ **Post date:** [November 4, 2016, 6:03pm UTC](https://www.epiusers.help/t/mrp-not-given-any-suggestions/36098/4 "2016-11-04T18:03:03Z")
Process MRP Recalc Needed may fix this. I always run it before running MRP. ---
**Author:** ![MiguelS](https://www.epiusers.help/user_avatar/www.epiusers.help/miguels/32/99_2.png) [@MiguelS](https://www.epiusers.help/u/MiguelS)\ **Post date:** [November 4, 2016, 6:08pm UTC](https://www.epiusers.help/t/mrp-not-given-any-suggestions/36098/5 "2016-11-04T18:08:26Z")
Trying… Yesterday, we set a part to RUN OUT, anyone use this? After my Recalc, I am going to uncheck RUN OUT and see what happens. ---
**Author:** ![MiguelS](https://www.epiusers.help/user_avatar/www.epiusers.help/miguels/32/99_2.png) [@MiguelS](https://www.epiusers.help/u/MiguelS)\ **Post date:** [November 4, 2016, 6:11pm UTC](https://www.epiusers.help/t/mrp-not-given-any-suggestions/36098/6 "2016-11-04T18:11:30Z")
Hopefully this flag does it…Running Regen again. > 1:07:54 MRP Recalc Flag set for Part 03-360361-02 by Check Cutoff Window > 11:07:54 MRP Recalc Flag set for Part 03-360361-02 by Check Cutoff Window > 11:07:54 MRP Recalc Flag set for Part 03-360362-00 by Check Cutoff Window > 11:07:54 MRP Recalc Flag set for Part 03-360362-00 by Check Cutoff Window > 11:07:54 MRP Recalc Flag set for Part 03-361128-00 by Check Cutoff Window > 11:07:54 MRP Recalc Flag set for Part 03-362345-00 by Check Cutoff Window > 11:07:54 MRP Recalc Flag set for Part 03-362404-00 by Check Cutoff Window > 11:07:54 MRP Recalc Flag set for Part 03-362582-00 by Check Cutoff Window > 11:07:54 MRP Recalc Flag set for Part 03-362945-00 by Check Cu ---
**Author:** ![MiguelS](https://www.epiusers.help/user_avatar/www.epiusers.help/miguels/32/99_2.png) [@MiguelS](https://www.epiusers.help/u/MiguelS)\ **Post date:** [November 4, 2016, 6:17pm UTC](https://www.epiusers.help/t/mrp-not-given-any-suggestions/36098/7 "2016-11-04T18:17:54Z")
That didnt do it neither…3/4 the way complete and only 5 jobs. ![](https://epiusers.help/uploads/default/original/1X/d33ebcf6bf741d30d9a66ecc20c5a1434b3c01e5.JPG) ---
**Author:** ![amaragni](https://www.epiusers.help/user_avatar/www.epiusers.help/amaragni/32/5766_2.png) [@amaragni](https://www.epiusers.help/u/amaragni)\ **Post date:** [November 4, 2016, 6:18pm UTC](https://www.epiusers.help/t/mrp-not-given-any-suggestions/36098/8 "2016-11-04T18:18:22Z")
right … the RECALC is a very good idea. ---
**Author:** ![amaragni](https://www.epiusers.help/user_avatar/www.epiusers.help/amaragni/32/5766_2.png) [@amaragni](https://www.epiusers.help/u/amaragni)\ **Post date:** [November 4, 2016, 6:23pm UTC](https://www.epiusers.help/t/mrp-not-given-any-suggestions/36098/9 "2016-11-04T18:23:36Z")
i know it sounds weird - but try opening up the regen dates … .like from 1/1/2001 to 1/1/2099 ---
**Author:** ![MiguelS](https://www.epiusers.help/user_avatar/www.epiusers.help/miguels/32/99_2.png) [@MiguelS](https://www.epiusers.help/u/MiguelS)\ **Post date:** [November 4, 2016, 6:41pm UTC](https://www.epiusers.help/t/mrp-not-given-any-suggestions/36098/10 "2016-11-04T18:41:00Z")
Just tried that…same thing. Going to run PO Suggestions by itself…see what happens. Just seems that a flag is not set somewhere. ---
**Author:** ![MiguelS](https://www.epiusers.help/user_avatar/www.epiusers.help/miguels/32/99_2.png) [@MiguelS](https://www.epiusers.help/u/MiguelS)\ **Post date:** [November 4, 2016, 7:57pm UTC](https://www.epiusers.help/t/mrp-not-given-any-suggestions/36098/11 "2016-11-04T19:57:08Z")
PO Suggestion completes but it is not giving about 20% of suggestions. ---
**Author:** ![Manasa](https://www.epiusers.help/letter_avatar_proxy/v4/letter/m/5fc32e/32.png) [@Manasa](https://www.epiusers.help/u/Manasa)\ **Post date:** [November 4, 2016, 8:09pm UTC](https://www.epiusers.help/t/mrp-not-given-any-suggestions/36098/12 "2016-11-04T20:09:59Z")
Start looking at all flags….All your parts are marked for Process MRP under the Planning tab? M. Manasa Reddy P: 703.471.7145 x454 [manasa@euclidsys.com](mailto:manasa@euclidsys.com)[mailto:manasa@euclidsys.com](mailto:manasa@euclidsys.com) ---
**Author:** ![MiguelS](https://www.epiusers.help/user_avatar/www.epiusers.help/miguels/32/99_2.png) [@MiguelS](https://www.epiusers.help/u/MiguelS)\ **Post date:** [November 9, 2016, 6:59pm UTC](https://www.epiusers.help/t/mrp-not-given-any-suggestions/36098/13 "2016-11-09T18:59:59Z")
Either the truncation of the BI did it, or the Binary Dump and Load? Spent Friday night doing the D&L for Saturday morning. Was able to get it going around 530am and MRP started to work again. ---
**Author:** ![Chris\_Conn](https://www.epiusers.help/user_avatar/www.epiusers.help/chris_conn/32/93797_2.png) [@Chris\_Conn](https://www.epiusers.help/u/Chris_Conn)\ **Post date:** [November 9, 2016, 11:51pm UTC](https://www.epiusers.help/t/mrp-not-given-any-suggestions/36098/14 "2016-11-09T23:51:43Z")
Sorry I don’t have anything productive to add but I do have a question. What exactly does that recalc do? ---
**Author:** ![jgiese.wci](https://www.epiusers.help/user_avatar/www.epiusers.help/jgiese.wci/32/51553_2.png) [@jgiese.wci](https://www.epiusers.help/u/jgiese.wci)\ **Post date:** [November 10, 2016, 12:01am UTC](https://www.epiusers.help/t/mrp-not-given-any-suggestions/36098/15 "2016-11-10T00:01:14Z")
The global scheduling recalc? Joshua Giese CTO 920.437.6400 x342 Wisconsin Converting Inc. ---
**Author:** ![Chris\_Conn](https://www.epiusers.help/user_avatar/www.epiusers.help/chris_conn/32/93797_2.png) [@Chris\_Conn](https://www.epiusers.help/u/Chris_Conn)\ **Post date:** [November 10, 2016, 4:00pm UTC](https://www.epiusers.help/t/mrp-not-given-any-suggestions/36098/16 "2016-11-10T16:00:57Z")
yes ---
**Author:** ![rbucek](https://www.epiusers.help/user_avatar/www.epiusers.help/rbucek/32/28841_2.png) [@rbucek](https://www.epiusers.help/u/rbucek)\ **Post date:** [November 10, 2016, 10:57pm UTC](https://www.epiusers.help/t/mrp-not-given-any-suggestions/36098/17 "2016-11-10T22:57:31Z")
it provides a list of jobs for global scheduling. whether you are finitely or infinitely scheduling, run that before global scheduling. ---
**Author:** ![DaveH](https://www.epiusers.help/letter_avatar_proxy/v4/letter/d/85e7bf/32.png) [@DaveH](https://www.epiusers.help/u/DaveH)\ **Post date:** [November 15, 2016, 3:13pm UTC](https://www.epiusers.help/t/mrp-not-given-any-suggestions/36098/18 "2016-11-15T15:13:36Z")
I believe the reference was the Process MRP Recalc Needed process which is needed for NetChange as it flags parts to review if inventories are changed, orders moved or changed, and job changes also. It places a yes in the partplant record, MRPRecalcNeeded field.