Multiple part numbers coming from the same job

Yahoo Archive
1
Good to know! Better to hear everything up front that find it out after
the fact. Thanks!

Beth


--- In vantage@yahoogroups.com, "Tom J. Christie" <tchristie@...> wrote:
>
> Be careful to explore the costing ramifications. We can't use the Job
Parts successfully because it divides the costs in a ratio. I have a
$10000 assembly that sheds a few parts during a conversion process. I
want to say the part A carries all value except Part B gets $4 and Part
C gets $6. Doesn't work that way though!
>
> Tom Christie | Information Technology Manager | AGM Container
Controls, Inc. | tchristie@...<mailto:tchristie@... | t: 520.881.2130
ext 2176
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
Behalf Of B
> Sent: Wednesday, March 27, 2013 6:01 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Re: Multiple part numbers coming from the same job
>
>
>
> Thanks for the help with this. When we originally were talking about
> this using co-parts, we thought it would be a problem because co-parts
> do not allow serialization. This should not be a problem as we are not
> serializing each part but we do use lot tracking.
>
> --- In vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>,
"kwhague" hague.kurt@<mailto:hague.kurt@> wrote:
> >
> > Advanced Production allows this. Pre-9.05, 700, you would add the
> second part to the method on the job as a Job-Part. From 700 forward
you
> can still do it on the job, but can also create a method with 2 or
more
> Co-Parts.
> >
> > --- In vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>,
"Bethany Rye" brye@ wrote:
> > >
> > > Epicor 9.05.701
> > >
> > >
> > >
> > > I found a thread related to the topic above but it wasn't exactly
> what I am
> > > looking for. We need to create one job that will produce two
> different part
> > > numbers which can be taken to stock (a left and a right). Is
anyone
> doing
> > > this? If so, can you share with me how you accomplish this? TIA!
> > >
> > >
> > >
> > > Beth
> > >
> > >
> > >
> > > Bethany Rye
> > > Epicor Business Analyst
> > >
> > > <http://www.teampti.com/>
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
>
>
>
> [Non-text portions of this message have been removed]
>
2
Epicor 9.05.701



I found a thread related to the topic above but it wasn't exactly what I am
looking for. We need to create one job that will produce two different part
numbers which can be taken to stock (a left and a right). Is anyone doing
this? If so, can you share with me how you accomplish this? TIA!



Beth



Bethany Rye
Epicor Business Analyst

<http://www.teampti.com/>











[Non-text portions of this message have been removed]
3
Advanced Production allows this. Pre-9.05, 700, you would add the second part to the method on the job as a Job-Part. From 700 forward you can still do it on the job, but can also create a method with 2 or more Co-Parts.

--- In vantage@yahoogroups.com, "Bethany Rye" <brye@...> wrote:
>
> Epicor 9.05.701
>
>
>
> I found a thread related to the topic above but it wasn't exactly what I am
> looking for. We need to create one job that will produce two different part
> numbers which can be taken to stock (a left and a right). Is anyone doing
> this? If so, can you share with me how you accomplish this? TIA!
>
>
>
> Beth
>
>
>
> Bethany Rye
> Epicor Business Analyst
>
> <http://www.teampti.com/>
>
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
4
Thanks for the help with this. When we originally were talking about
this using co-parts, we thought it would be a problem because co-parts
do not allow serialization. This should not be a problem as we are not
serializing each part but we do use lot tracking.


--- In vantage@yahoogroups.com, "kwhague" <hague.kurt@...> wrote:
>
> Advanced Production allows this. Pre-9.05, 700, you would add the
second part to the method on the job as a Job-Part. From 700 forward you
can still do it on the job, but can also create a method with 2 or more
Co-Parts.
>
> --- In vantage@yahoogroups.com, "Bethany Rye" brye@ wrote:
> >
> > Epicor 9.05.701
> >
> >
> >
> > I found a thread related to the topic above but it wasn't exactly
what I am
> > looking for. We need to create one job that will produce two
different part
> > numbers which can be taken to stock (a left and a right). Is anyone
doing
> > this? If so, can you share with me how you accomplish this? TIA!
> >
> >
> >
> > Beth
> >
> >
> >
> > Bethany Rye
> > Epicor Business Analyst
> >
> > <http://www.teampti.com/>
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
5
Be careful to explore the costing ramifications. We can't use the Job Parts successfully because it divides the costs in a ratio. I have a $10000 assembly that sheds a few parts during a conversion process. I want to say the part A carries all value except Part B gets $4 and Part C gets $6. Doesn't work that way though!

Tom Christie | Information Technology Manager | AGM Container Controls, Inc. | tchristie@...<mailto:tchristie@...> | t: 520.881.2130 ext 2176

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of B
Sent: Wednesday, March 27, 2013 6:01 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: Multiple part numbers coming from the same job



Thanks for the help with this. When we originally were talking about
this using co-parts, we thought it would be a problem because co-parts
do not allow serialization. This should not be a problem as we are not
serializing each part but we do use lot tracking.

--- In vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>, "kwhague" <hague.kurt@...<mailto:hague.kurt@...>> wrote:
>
> Advanced Production allows this. Pre-9.05, 700, you would add the
second part to the method on the job as a Job-Part. From 700 forward you
can still do it on the job, but can also create a method with 2 or more
Co-Parts.
>
> --- In vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>, "Bethany Rye" brye@ wrote:
> >
> > Epicor 9.05.701
> >
> >
> >
> > I found a thread related to the topic above but it wasn't exactly
what I am
> > looking for. We need to create one job that will produce two
different part
> > numbers which can be taken to stock (a left and a right). Is anyone
doing
> > this? If so, can you share with me how you accomplish this? TIA!
> >
> >
> >
> > Beth
> >
> >
> >
> > Bethany Rye
> > Epicor Business Analyst
> >
> > <http://www.teampti.com/>
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>



[Non-text portions of this message have been removed]