OT-Personal Listening Devices

Yahoo Archive
1
> Our company has been looking for similar devices, could you tell us where
> you purchase these items.

They are made by bilsom, www.bilsom.com. I was told the model number is
0799. Looking at the web site, I believe they are the "electo" model. We
bought ours through McCordick Glove and Safety.

Hope that helps!

Brian
2
Hello to everyone,

After 34 years we are still struggling with shop employees' request to use
personal listening devices. We were wondering how others handle this.

Do you allow your worker's to use headphones & personal listening devices
while performing there job?

Thanks,
Kathy Hambleton
Electron Energy Corporation
717-898-2294
717-898-0660 (fax)
3
We manufacture electronic components and we allow our production workers
to use personal listening devices on the floor. The only area where
they are not allowed is in the cleanroom. Seems to keep everybody happy
and productive.



Lori Gustafson

Information Resources

Precision, Inc.

763-852-6718

________________________________

From: Kathy Hambleton [mailto:kbh@...]
Sent: Monday, January 24, 2005 9:36 AM
To: Vantage Onelist (E-mail)
Subject: [Vantage] OT-Personal Listening Devices



Hello to everyone,

After 34 years we are still struggling with shop employees' request to
use
personal listening devices. We were wondering how others handle this.

Do you allow your worker's to use headphones & personal listening
devices
while performing there job?

Thanks,
Kathy Hambleton
Electron Energy Corporation
717-898-2294
717-898-0660 (fax)



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links




________________________________

Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .



[Non-text portions of this message have been removed]
4
Strictly prohibited in the plant in any area where heavy machinery exists (pretty much everywhere in a metal stamping setting). Too much of a safety issue - both for wires to headphones/ear plugs and inability to hear warning sounds such as on fork lifts. Also it poses a distraction risk. Finally mandatory hearing protection pretty much makes it impossible and audio headphones don't meet OSHA specs for protection. On the other hand semi-office areas such as QA and the CAD rooms are OK. In the regular office area we recently started to allow radios when we terminated radio over our phone (for on-hold music) and put in a marketing tape because we got tired of the annual ASCAP shakedown.
-Todd C.

-----Original Message-----
From: Kathy Hambleton [mailto:kbh@...]
Sent: Monday, January 24, 2005 9:36 AM
To: Vantage Onelist (E-mail)
Subject: [Vantage] OT-Personal Listening Devices


Hello to everyone,

After 34 years we are still struggling with shop employees' request to use
personal listening devices. We were wondering how others handle this.

Do you allow your worker's to use headphones & personal listening devices
while performing there job?

Thanks,
Kathy Hambleton
Electron Energy Corporation
717-898-2294
717-898-0660 (fax)



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links



_____

Yahoo! Groups Links


* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
5
Our insurance agent advised against their use. He citied workers comp claims
for permanent hearing loss arising from long term exposure to such devices.
Our labor attorney said that if the employer is silent on the issue, they
could be found liable. We do not permit them. We do annual audio-metric
testing to establish a base line, and monitor any potential hearing loss.

Dan Shallbetter
States Electric Mfg.

-----Original Message-----
From: Kathy Hambleton [mailto:kbh@...]
Sent: Monday, January 24, 2005 9:36 AM
To: Vantage Onelist (E-mail)
Subject: [Vantage] OT-Personal Listening Devices


Hello to everyone,

After 34 years we are still struggling with shop employees' request to use
personal listening devices. We were wondering how others handle this.

Do you allow your worker's to use headphones & personal listening devices
while performing there job?

Thanks,
Kathy Hambleton
Electron Energy Corporation
717-898-2294
717-898-0660 (fax)







[Non-text portions of this message have been removed]
6
> Do you allow your worker's to use headphones & personal listening devices
> while performing there job?

Our shop employees can purchase special headphones with a built in radio
(company pays half). It also has a voice-responsive microphone so that you
can still hear someone talking to you without amplifying the background
noise.

Brian
7
Our company has been looking for similar devices, could you tell us where
you purchase these items.

Shirley Graver

-----Original Message-----
From: Brian [mailto:Brian.Boyes@...]
Sent: Tuesday, January 25, 2005 8:08 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT-Personal Listening Devices


> Do you allow your worker's to use headphones & personal listening devices
> while performing there job?

Our shop employees can purchase special headphones with a built in radio
(company pays half). It also has a voice-responsive microphone so that you
can still hear someone talking to you without amplifying the background
noise.

Brian



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links








Tracking #: 039ADF09D1448E4F9FF1E5E8E75CD193FB1AAF0B
8
Brian,

Could you give me details regarding the special headphones? My President is
very interested.

Thanks to everyone for your responses on this topic.

Kathy Hambleton
Electron Energy Corporation
717-898-2294
717-898-0660 (fax)

-----Original Message-----
From: Brian [mailto:Brian.Boyes@...]
Sent: Tuesday, January 25, 2005 8:08 AM
To: vantage@yahoogroups.com
Subject: Spam:RE: [Vantage] OT-Personal Listening Devices



> Do you allow your worker's to use headphones & personal listening devices
> while performing there job?

Our shop employees can purchase special headphones with a built in radio
(company pays half). It also has a voice-responsive microphone so that you
can still hear someone talking to you without amplifying the background
noise.

Brian



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
9
We currently import all of our orders into Vantage 6.1 via the EDI module.
The orders we pull in have releases on them out to 56 weeks, however we only
create jobs for 3 months or so because we know that anything beyond that
could possibly change and does. My question is, Does anyone have a report or
is there a way in Vantage to show a forecast shop load capacity based on the
sales orders in Vantage.
10
Do you have the MRP module ?

MRP will create un-engineered jobs based on approved part revisions. The
JobOper table will be populated with required hours by op and
workcenter.

The scheduled load and Capacity can then be viewed in the Vantage
Shopload graphs & reports?

-----Original Message-----
From: Ben Roush [mailto:b_roush@...]
Sent: Tuesday, January 25, 2005 9:43 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Sales Order Shop Load


We currently import all of our orders into Vantage 6.1 via the EDI
module.
The orders we pull in have releases on them out to 56 weeks, however we
only
create jobs for 3 months or so because we know that anything beyond that
could possibly change and does. My question is, Does anyone have a
report or
is there a way in Vantage to show a forecast shop load capacity based on
the
sales orders in Vantage.



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
11
We just got the trial codes from Vantage for the MRP, not really sure what
Im doing with it yet. Do all parts have to be set in the part master to
Process MRP before you can see the info?

-----Original Message-----
From: Clint Muhlestein [mailto:cmuhlestein@...]
Sent: Tuesday, January 25, 2005 11:14 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Sales Order Shop Load



Do you have the MRP module ?

MRP will create un-engineered jobs based on approved part revisions. The
JobOper table will be populated with required hours by op and
workcenter.

The scheduled load and Capacity can then be viewed in the Vantage
Shopload graphs & reports?

-----Original Message-----
From: Ben Roush [mailto:b_roush@...]
Sent: Tuesday, January 25, 2005 9:43 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Sales Order Shop Load


We currently import all of our orders into Vantage 6.1 via the EDI
module.
The orders we pull in have releases on them out to 56 weeks, however we
only
create jobs for 3 months or so because we know that anything beyond that
could possibly change and does. My question is, Does anyone have a
report or
is there a way in Vantage to show a forecast shop load capacity based on
the
sales orders in Vantage.



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links










Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
12
yes...under the part file, under the Inv/Purch button is a check box to
Process MRP.

Only process those you want jobs created.....

M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email: mreddy@...
Phone: (850) 682-2746 x 272


-----Original Message-----
From: Ben Roush [mailto:b_roush@...]
Sent: Tuesday, January 25, 2005 11:47 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Sales Order Shop Load


We just got the trial codes from Vantage for the MRP, not really sure what
Im doing with it yet. Do all parts have to be set in the part master to
Process MRP before you can see the info?

-----Original Message-----
From: Clint Muhlestein [mailto:cmuhlestein@...]
Sent: Tuesday, January 25, 2005 11:14 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Sales Order Shop Load



Do you have the MRP module ?

MRP will create un-engineered jobs based on approved part revisions. The
JobOper table will be populated with required hours by op and
workcenter.

The scheduled load and Capacity can then be viewed in the Vantage
Shopload graphs & reports?

-----Original Message-----
From: Ben Roush [mailto:b_roush@...]
Sent: Tuesday, January 25, 2005 9:43 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Sales Order Shop Load


We currently import all of our orders into Vantage 6.1 via the EDI
module.
The orders we pull in have releases on them out to 56 weeks, however we
only
create jobs for 3 months or so because we know that anything beyond that
could possibly change and does. My question is, Does anyone have a
report or
is there a way in Vantage to show a forecast shop load capacity based on
the
sales orders in Vantage.



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links










Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links









Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links



----------------------------------------------------------------------------
--
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]
13
forgot to mention that it will only create a job you have a demand for (open
Sales Order) and for only the approved revision.

M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email: mreddy@...
Phone: (850) 682-2746 x 272


-----Original Message-----
From: Manasa Reddy [mailto:mreddy@...]
Sent: Tuesday, January 25, 2005 12:13 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Sales Order Shop Load


yes...under the part file, under the Inv/Purch button is a check box to
Process MRP.

Only process those you want jobs created.....

M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email: mreddy@...
Phone: (850) 682-2746 x 272


-----Original Message-----
From: Ben Roush [mailto:b_roush@...]
Sent: Tuesday, January 25, 2005 11:47 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Sales Order Shop Load


We just got the trial codes from Vantage for the MRP, not really sure
what
Im doing with it yet. Do all parts have to be set in the part master to
Process MRP before you can see the info?

-----Original Message-----
From: Clint Muhlestein [mailto:cmuhlestein@...]
Sent: Tuesday, January 25, 2005 11:14 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Sales Order Shop Load



Do you have the MRP module ?

MRP will create un-engineered jobs based on approved part revisions. The
JobOper table will be populated with required hours by op and
workcenter.

The scheduled load and Capacity can then be viewed in the Vantage
Shopload graphs & reports?

-----Original Message-----
From: Ben Roush [mailto:b_roush@...]
Sent: Tuesday, January 25, 2005 9:43 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Sales Order Shop Load


We currently import all of our orders into Vantage 6.1 via the EDI
module.
The orders we pull in have releases on them out to 56 weeks, however we
only
create jobs for 3 months or so because we know that anything beyond that
could possibly change and does. My question is, Does anyone have a
report or
is there a way in Vantage to show a forecast shop load capacity based on
the
sales orders in Vantage.



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links










Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links









Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links



--------------------------------------------------------------------------
--
--
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links



----------------------------------------------------------------------------
--
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]
14
The only thing I don't like is there is no color coding in the shop-load
graph to tell what % of Job hrs is

Un-engineered and what is released.



MRP has been a great tool for us. It has greatly reduced our job release
time. And given us much better

Forecasting abilities.



_____

From: Manasa Reddy [mailto:mreddy@...]
Sent: Tuesday, January 25, 2005 11:15 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Sales Order Shop Load



forgot to mention that it will only create a job you have a demand for
(open
Sales Order) and for only the approved revision.

M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email: mreddy@...
Phone: (850) 682-2746 x 272


-----Original Message-----
From: Manasa Reddy [mailto:mreddy@...]
Sent: Tuesday, January 25, 2005 12:13 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Sales Order Shop Load


yes...under the part file, under the Inv/Purch button is a check box
to
Process MRP.

Only process those you want jobs created.....

M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email: mreddy@...
Phone: (850) 682-2746 x 272


-----Original Message-----
From: Ben Roush [mailto:b_roush@...]
Sent: Tuesday, January 25, 2005 11:47 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Sales Order Shop Load


We just got the trial codes from Vantage for the MRP, not really
sure
what
Im doing with it yet. Do all parts have to be set in the part master
to
Process MRP before you can see the info?

-----Original Message-----
From: Clint Muhlestein [mailto:cmuhlestein@...]
Sent: Tuesday, January 25, 2005 11:14 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Sales Order Shop Load



Do you have the MRP module ?

MRP will create un-engineered jobs based on approved part revisions.
The
JobOper table will be populated with required hours by op and
workcenter.

The scheduled load and Capacity can then be viewed in the Vantage
Shopload graphs & reports?

-----Original Message-----
From: Ben Roush [mailto:b_roush@...]
Sent: Tuesday, January 25, 2005 9:43 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Sales Order Shop Load


We currently import all of our orders into Vantage 6.1 via the EDI
module.
The orders we pull in have releases on them out to 56 weeks, however
we
only
create jobs for 3 months or so because we know that anything beyond
that
could possibly change and does. My question is, Does anyone have a
report or
is there a way in Vantage to show a forecast shop load capacity
based on
the
sales orders in Vantage.



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
have already linked your email address to a yahoo id to enable
access. )
(1) To access the Files Section of our Yahoo!Group for Report
Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links










Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report
Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links









Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
have already linked your email address to a yahoo id to enable access.
)
(1) To access the Files Section of our Yahoo!Group for Report
Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links




------------------------------------------------------------------------
--
--
--
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links



------------------------------------------------------------------------
----
--
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links




_____

Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .



[Non-text portions of this message have been removed]
15
Ok, like an idiot, I should have read the original message.

You can use the MRP to create UNfirm jobs and then firm them up out to three
months. Basically, you can tell MRP to only create unfirm jobs with a
prefix of 'U' (this is what we do to distinguish what has already been firm
and what is still not firm). When MRP runs again, anything that is still
unfirm gets deleted, creates the new unfirm jobs and you can now firm up to
your three month schedule. This is how we use it.

Sorry for confusing you!

M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email: mreddy@...
Phone: (850) 682-2746 x 272


-----Original Message-----
From: Manasa Reddy [mailto:mreddy@...]
Sent: Tuesday, January 25, 2005 12:15 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Sales Order Shop Load


forgot to mention that it will only create a job you have a demand for
(open
Sales Order) and for only the approved revision.

M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email: mreddy@...
Phone: (850) 682-2746 x 272


-----Original Message-----
From: Manasa Reddy [mailto:mreddy@...]
Sent: Tuesday, January 25, 2005 12:13 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Sales Order Shop Load


yes...under the part file, under the Inv/Purch button is a check box to
Process MRP.

Only process those you want jobs created.....

M. Manasa Reddy
ERP Specialist
Crestview Aerospace Corporation
Email: mreddy@...
Phone: (850) 682-2746 x 272


-----Original Message-----
From: Ben Roush [mailto:b_roush@...]
Sent: Tuesday, January 25, 2005 11:47 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Sales Order Shop Load


We just got the trial codes from Vantage for the MRP, not really sure
what
Im doing with it yet. Do all parts have to be set in the part master
to
Process MRP before you can see the info?

-----Original Message-----
From: Clint Muhlestein [mailto:cmuhlestein@...]
Sent: Tuesday, January 25, 2005 11:14 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Sales Order Shop Load



Do you have the MRP module ?

MRP will create un-engineered jobs based on approved part revisions.
The
JobOper table will be populated with required hours by op and
workcenter.

The scheduled load and Capacity can then be viewed in the Vantage
Shopload graphs & reports?

-----Original Message-----
From: Ben Roush [mailto:b_roush@...]
Sent: Tuesday, January 25, 2005 9:43 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Sales Order Shop Load


We currently import all of our orders into Vantage 6.1 via the EDI
module.
The orders we pull in have releases on them out to 56 weeks, however
we
only
create jobs for 3 months or so because we know that anything beyond
that
could possibly change and does. My question is, Does anyone have a
report or
is there a way in Vantage to show a forecast shop load capacity based
on
the
sales orders in Vantage.



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable
access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links










Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must

have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links









Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links



------------------------------------------------------------------------
--
--
--
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links



--------------------------------------------------------------------------
--
--
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links



----------------------------------------------------------------------------
--
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]