[OT]Slow Vantage after disconnecting old server

Yahoo Archive
1
I can't remember what we did at the time, I just remember that it was a
pain.

I'm glad to hear that you have it all sorted out.

Chris

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Norm Watkins
Sent: Friday, January 16, 2009 1:56 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage][OT]Slow Vantage after disconnecting old server

thanks Chris, that solved the problem, but what a pain that is. There
were
20+ registry entries pointing to the old server for epicor help files.
Did
you delete them or just point them to the new server? I changed them to
point to the new server, but I will look for duplicate registry entries
when
I have a chance.

thanks again.

Norm Watkins
Engineering Mgr.
ELECPAC
847-639-2307

-----Original Message-----
From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com]On
Behalf
Of Chris Stover
Sent: Friday, January 16, 2009 1:18 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: RE: [Vantage][OT]Slow Vantage after disconnecting old server

We had this same exact problem. We had to go to each of the
workstations and get into the registry and clean up any of the old paths
that were pointing to the old server. It took us a while to figure out
what the problem was, but once we got them cleaned up we were good to
go.

-----Original Message-----
From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
Of Norm Watkins
Sent: Friday, January 16, 2009 12:04 PM
To: Vantage@Yahoogroups. Com
Subject: [Vantage][OT]Slow Vantage after disconnecting old server

For you IT pros, I've been upgrading my servers, and have moved
everything
to our Vantage server, including installing a Virtual Disk/Server to act
as
Domain controller (roles have been transferred to the Virtual Server)
while
I upgrade the old Domain Server software. Everything works, including
Vantage, but when I disconnect the old Server (unplug the network cable)
Vantage runs very slow, but does run. DNS settings do not point to the
old
server. Any ideas? Do I need to reboot the new server after
disconnecting
the old one? I plan on trying that over the weekend when nobody is here.

thanks,

Norm Watkins
Engineering Mgr.
ELECPAC
847-639-2307

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups. <http://groups.yahoo.com/group/vantage/files/>
yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups. <http://groups.yahoo.com/group/vantage/messages>
yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups. <http://groups.yahoo.com/group/vantage/linksYahoo>
yahoo.com/group/vantage/linksYahoo! Groups Links



[Non-text portions of this message have been removed]
2
For you IT pros, I've been upgrading my servers, and have moved everything
to our Vantage server, including installing a Virtual Disk/Server to act as
Domain controller (roles have been transferred to the Virtual Server) while
I upgrade the old Domain Server software. Everything works, including
Vantage, but when I disconnect the old Server (unplug the network cable)
Vantage runs very slow, but does run. DNS settings do not point to the old
server. Any ideas? Do I need to reboot the new server after disconnecting
the old one? I plan on trying that over the weekend when nobody is here.

thanks,

Norm Watkins
Engineering Mgr.
ELECPAC
847-639-2307
3
We had this same exact problem. We had to go to each of the
workstations and get into the registry and clean up any of the old paths
that were pointing to the old server. It took us a while to figure out
what the problem was, but once we got them cleaned up we were good to
go.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Norm Watkins
Sent: Friday, January 16, 2009 12:04 PM
To: Vantage@Yahoogroups. Com
Subject: [Vantage][OT]Slow Vantage after disconnecting old server

For you IT pros, I've been upgrading my servers, and have moved
everything
to our Vantage server, including installing a Virtual Disk/Server to act
as
Domain controller (roles have been transferred to the Virtual Server)
while
I upgrade the old Domain Server software. Everything works, including
Vantage, but when I disconnect the old Server (unplug the network cable)
Vantage runs very slow, but does run. DNS settings do not point to the
old
server. Any ideas? Do I need to reboot the new server after
disconnecting
the old one? I plan on trying that over the weekend when nobody is here.

thanks,

Norm Watkins
Engineering Mgr.
ELECPAC
847-639-2307



[Non-text portions of this message have been removed]
4
thanks Chris, that solved the problem, but what a pain that is. There were
20+ registry entries pointing to the old server for epicor help files. Did
you delete them or just point them to the new server? I changed them to
point to the new server, but I will look for duplicate registry entries when
I have a chance.

thanks again.

Norm Watkins
Engineering Mgr.
ELECPAC
847-639-2307

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of Chris Stover
Sent: Friday, January 16, 2009 1:18 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage][OT]Slow Vantage after disconnecting old server


We had this same exact problem. We had to go to each of the
workstations and get into the registry and clean up any of the old paths
that were pointing to the old server. It took us a while to figure out
what the problem was, but once we got them cleaned up we were good to
go.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Norm Watkins
Sent: Friday, January 16, 2009 12:04 PM
To: Vantage@Yahoogroups. Com
Subject: [Vantage][OT]Slow Vantage after disconnecting old server

For you IT pros, I've been upgrading my servers, and have moved
everything
to our Vantage server, including installing a Virtual Disk/Server to act
as
Domain controller (roles have been transferred to the Virtual Server)
while
I upgrade the old Domain Server software. Everything works, including
Vantage, but when I disconnect the old Server (unplug the network cable)
Vantage runs very slow, but does run. DNS settings do not point to the
old
server. Any ideas? Do I need to reboot the new server after
disconnecting
the old one? I plan on trying that over the weekend when nobody is here.

thanks,

Norm Watkins
Engineering Mgr.
ELECPAC
847-639-2307



[Non-text portions of this message have been removed]


------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links