Plant Schedule Visibility

Yahoo Archive
1
Never tested it and have to go into a meeting just now. Good question.

-----Original Message-----
From: Winter, Patrick [mailto:pjw@...]
Sent: Friday, December 01, 2000 11:27 AM
To: 'vantage@egroups.com'
Subject: RE: [Vantage] Plant Schedule Visibility


Mark

If the operation is a subcontract will it post the last transaction date to
that field.

Patrick

-----Original Message-----
From: Mark Pladson [mailto:mpladson@...]
Sent: Friday, December 01, 2000 10:29 AM
To: 'vantage@egroups.com'
Subject: RE: [Vantage] Plant Schedule Visibility


The last labor date was added to the JobOpr table for eMfg 5.0

> Mark Pladson
> Product Manager
> eManufacturing Powered by Vantage
> Epicor Software Corporation
> www.epicor.com
> Phone # 952-417-5187
> Fax # 952-582-5478
> email address MPladson@...
>


-----Original Message-----
From: Todd Anderson [mailto:tanderson@...]
Sent: Friday, December 01, 2000 8:13 AM
To: 'vantage@egroups.com'
Subject: RE: [Vantage] Plant Schedule Visibility


Pat,

Rumor has it that the "Last Labor Date" will be added to the JOBOPER record
with the next release so you don't have to skim through the labor detail
records trying to find the last date. I have no idea on the other fields.
Didn't you have a V 5.0 test DB ?

Todd

-----Original Message-----
From: Winter, Patrick [mailto:pjw@...]
Sent: Friday, December 01, 2000 7:53 AM
To: 'vantage@egroups.com'
Subject: RE: [Vantage] Plant Schedule Visibility


I will give you another spin on this topic. I would like to see changes to
the JobOper table to make it easier for us to write any Report Builder
Report for production control or manufacturing. If each JobOper record would
keep the "First Labor Date or OSS Tran Date" and the "Last Labor Date or OSS
Tran Date" along with the "Prior Operation Sequence Number" I could then
create: Any Type Of: Priority Dispatch, Shop Load, Stalled WIP, Job or
Operation Through Put Time analysis, etc... Reports. Also combinations A
Shop Load that shows Jobs Expected or Available etc...


Patrick J. Winter
Information Services Manager
sSc Specialty Screw Corporation
Vantage 4.00.901

-----Original Message-----
From: Diane Rowberry [mailto:diane.rowberry@...]
Sent: Thursday, November 30, 2000 02:12 PM
To: vantage@egroups.com
Subject: RE: [Vantage] Plant Schedule Visibility


Marc,

We are also Classic to Vantage users and I would like to sign on your call -
please refresh my memory on how to do this? I signed on to the Epicor
website and went into support - I thought that it was in the eranet area,
but it will only look at my calls, not other user calls. I would love to
support you on this one.

Diane Rowberry
Westwood Precision, Inc.
425-742-7011 ex 43


-----Original Message-----
From: Marc Durre [mailto:mdurre@...]
Sent: Tuesday, November 28, 2000 6:10 AM
To: vantage@egroups.com
Subject: RE: [Vantage] Plant Schedule Visibility


We are a job shop that moved from Classic to Vantage and are very
disappointed with the Priority Dispatch List in Vantage. The one in In
Classic was so much better. Besides what is on the Vantage PDL it also
included material information (Part no. & Description) Previous Workcenter,
Next Workcenter, days late, and if the previous workcenter had started the
no. of parts completed. This was very helpful for operators of first cut
operations they could group jobs of the same material together, this would
save time on setups and was very efficient. We put in a suggested
enhancement to change the PDL to be the same as in Classic it is call#
495696mps and document # 3246mps. Sign on to it.

Marc Durre
Durre Bros.

-----Original Message-----
From: Diane Rowberry [mailto:diane.rowberry@...]
Sent: Monday, November 27, 2000 11:27 AM
To: vantage@egroups.com
Subject: RE: [Vantage] Plant Schedule Visibility


I print the priority dispatch report for each machine (three months out) and
number the items in the order they need to run, add any pertanent
information (material availability etc) and make copies of it for all the
lead people and management. I do this twice a week in conjunction with a
production meeting. It seems to work well for us. HTH

Diane Rowberry
Westwood Precision, Inc.
(425)742-7011 ex 43


-----Original Message-----
From: JEFFTKELLY@... [mailto:JEFFTKELLY@...]
Sent: Monday, November 27, 2000 9:14 AM
To: vantage@egroups.com
Subject: [Vantage] Plant Schedule Visibility


Hi Everyone,

We are in the process of desinging a schedule board to be located in our
shop
to show the current work in house and due dates. This would be something
that is manually updated. It would not be any great detail or be used to
schedule, but to give employees an idea of where we are in production.

I am hoping that some of you have something similar that you can share
information about. Any input will be appreciated.

Thanks, Jeff Kelly
Youngberg Industries, Inc.



We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
<http://www.egroups.com/files/vantage/>
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)




We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
<http://www.egroups.com/files/vantage/>
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)


eGroups Sponsor

<http://rd.yahoo.com/M=80940.939512.2648849.2/D=egroupmail/S=1700007183:N/A=
502270/*http://www.lowestfare.com/cgi-bin/gx.cgi/AppLogic+lowestfare.home.Ho
me?div=YAHOO&dept=RONB> Travel Over to Lowestfare.com!
Travel Over to Lowestfare.com!

We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
<http://www.egroups.com/files/vantage/>
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)




We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)


We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)


We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)
2
Hi Everyone,

We are in the process of desinging a schedule board to be located in our shop
to show the current work in house and due dates. This would be something
that is manually updated. It would not be any great detail or be used to
schedule, but to give employees an idea of where we are in production.

I am hoping that some of you have something similar that you can share
information about. Any input will be appreciated.

Thanks, Jeff Kelly
Youngberg Industries, Inc.
3
I print the priority dispatch report for each machine (three months out) and
number the items in the order they need to run, add any pertanent
information (material availability etc) and make copies of it for all the
lead people and management. I do this twice a week in conjunction with a
production meeting. It seems to work well for us. HTH

Diane Rowberry
Westwood Precision, Inc.
(425)742-7011 ex 43


-----Original Message-----
From: JEFFTKELLY@... [mailto:JEFFTKELLY@...]
Sent: Monday, November 27, 2000 9:14 AM
To: vantage@egroups.com
Subject: [Vantage] Plant Schedule Visibility


Hi Everyone,

We are in the process of desinging a schedule board to be located in our
shop
to show the current work in house and due dates. This would be something
that is manually updated. It would not be any great detail or be used to
schedule, but to give employees an idea of where we are in production.

I am hoping that some of you have something similar that you can share
information about. Any input will be appreciated.

Thanks, Jeff Kelly
Youngberg Industries, Inc.


We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)
4
We are a job shop that moved from Classic to Vantage and are very
disappointed with the Priority Dispatch List in Vantage. The one in In
Classic was so much better. Besides what is on the Vantage PDL it also
included material information (Part no. & Description) Previous Workcenter,
Next Workcenter, days late, and if the previous workcenter had started the
no. of parts completed. This was very helpful for operators of first cut
operations they could group jobs of the same material together, this would
save time on setups and was very efficient. We put in a suggested
enhancement to change the PDL to be the same as in Classic it is call#
495696mps and document # 3246mps. Sign on to it.

Marc Durre
Durre Bros.

-----Original Message-----
From: Diane Rowberry [mailto:diane.rowberry@...]
Sent: Monday, November 27, 2000 11:27 AM
To: vantage@egroups.com
Subject: RE: [Vantage] Plant Schedule Visibility


I print the priority dispatch report for each machine (three months out) and
number the items in the order they need to run, add any pertanent
information (material availability etc) and make copies of it for all the
lead people and management. I do this twice a week in conjunction with a
production meeting. It seems to work well for us. HTH

Diane Rowberry
Westwood Precision, Inc.
(425)742-7011 ex 43


-----Original Message-----
From: JEFFTKELLY@... [mailto:JEFFTKELLY@...]
Sent: Monday, November 27, 2000 9:14 AM
To: vantage@egroups.com
Subject: [Vantage] Plant Schedule Visibility


Hi Everyone,

We are in the process of desinging a schedule board to be located in our
shop
to show the current work in house and due dates. This would be something
that is manually updated. It would not be any great detail or be used to
schedule, but to give employees an idea of where we are in production.

I am hoping that some of you have something similar that you can share
information about. Any input will be appreciated.

Thanks, Jeff Kelly
Youngberg Industries, Inc.
5
Marc,

We are also Classic to Vantage users and I would like to sign on your call -
please refresh my memory on how to do this? I signed on to the Epicor
website and went into support - I thought that it was in the eranet area,
but it will only look at my calls, not other user calls. I would love to
support you on this one.

Diane Rowberry
Westwood Precision, Inc.
425-742-7011 ex 43


-----Original Message-----
From: Marc Durre [mailto:mdurre@...]
Sent: Tuesday, November 28, 2000 6:10 AM
To: vantage@egroups.com
Subject: RE: [Vantage] Plant Schedule Visibility


We are a job shop that moved from Classic to Vantage and are very
disappointed with the Priority Dispatch List in Vantage. The one in In
Classic was so much better. Besides what is on the Vantage PDL it also
included material information (Part no. & Description) Previous Workcenter,
Next Workcenter, days late, and if the previous workcenter had started the
no. of parts completed. This was very helpful for operators of first cut
operations they could group jobs of the same material together, this would
save time on setups and was very efficient. We put in a suggested
enhancement to change the PDL to be the same as in Classic it is call#
495696mps and document # 3246mps. Sign on to it.

Marc Durre
Durre Bros.

-----Original Message-----
From: Diane Rowberry [mailto:diane.rowberry@...]
Sent: Monday, November 27, 2000 11:27 AM
To: vantage@egroups.com
Subject: RE: [Vantage] Plant Schedule Visibility


I print the priority dispatch report for each machine (three months out) and
number the items in the order they need to run, add any pertanent
information (material availability etc) and make copies of it for all the
lead people and management. I do this twice a week in conjunction with a
production meeting. It seems to work well for us. HTH

Diane Rowberry
Westwood Precision, Inc.
(425)742-7011 ex 43


-----Original Message-----
From: JEFFTKELLY@... [mailto:JEFFTKELLY@...]
Sent: Monday, November 27, 2000 9:14 AM
To: vantage@egroups.com
Subject: [Vantage] Plant Schedule Visibility


Hi Everyone,

We are in the process of desinging a schedule board to be located in our
shop
to show the current work in house and due dates. This would be something
that is manually updated. It would not be any great detail or be used to
schedule, but to give employees an idea of where we are in production.

I am hoping that some of you have something similar that you can share
information about. Any input will be appreciated.

Thanks, Jeff Kelly
Youngberg Industries, Inc.



We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)
6
Diane,
I think you have to call tech support to do this. Thanks for your support.

Marc Durre
Durre Bros.

-----Original Message-----
From: Diane Rowberry [mailto:diane.rowberry@...]
Sent: Thursday, November 30, 2000 2:12 PM
To: vantage@egroups.com
Subject: RE: [Vantage] Plant Schedule Visibility


Marc,

We are also Classic to Vantage users and I would like to sign on your call -
please refresh my memory on how to do this? I signed on to the Epicor
website and went into support - I thought that it was in the eranet area,
but it will only look at my calls, not other user calls. I would love to
support you on this one.

Diane Rowberry
Westwood Precision, Inc.
425-742-7011 ex 43


-----Original Message-----
From: Marc Durre [mailto:mdurre@...]
Sent: Tuesday, November 28, 2000 6:10 AM
To: vantage@egroups.com
Subject: RE: [Vantage] Plant Schedule Visibility


We are a job shop that moved from Classic to Vantage and are very
disappointed with the Priority Dispatch List in Vantage. The one in In
Classic was so much better. Besides what is on the Vantage PDL it also
included material information (Part no. & Description) Previous Workcenter,
Next Workcenter, days late, and if the previous workcenter had started the
no. of parts completed. This was very helpful for operators of first cut
operations they could group jobs of the same material together, this would
save time on setups and was very efficient. We put in a suggested
enhancement to change the PDL to be the same as in Classic it is call#
495696mps and document # 3246mps. Sign on to it.

Marc Durre
Durre Bros.

-----Original Message-----
From: Diane Rowberry [mailto:diane.rowberry@...]
Sent: Monday, November 27, 2000 11:27 AM
To: vantage@egroups.com
Subject: RE: [Vantage] Plant Schedule Visibility


I print the priority dispatch report for each machine (three months out) and
number the items in the order they need to run, add any pertanent
information (material availability etc) and make copies of it for all the
lead people and management. I do this twice a week in conjunction with a
production meeting. It seems to work well for us. HTH

Diane Rowberry
Westwood Precision, Inc.
(425)742-7011 ex 43


-----Original Message-----
From: JEFFTKELLY@... [mailto:JEFFTKELLY@...]
Sent: Monday, November 27, 2000 9:14 AM
To: vantage@egroups.com
Subject: [Vantage] Plant Schedule Visibility


Hi Everyone,

We are in the process of desinging a schedule board to be located in our
shop
to show the current work in house and due dates. This would be something
that is manually updated. It would not be any great detail or be used to
schedule, but to give employees an idea of where we are in production.

I am hoping that some of you have something similar that you can share
information about. Any input will be appreciated.

Thanks, Jeff Kelly
Youngberg Industries, Inc.



We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)




We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)
7
I will give you another spin on this topic. I would like to see changes to
the JobOper table to make it easier for us to write any Report Builder
Report for production control or manufacturing. If each JobOper record would
keep the "First Labor Date or OSS Tran Date" and the "Last Labor Date or OSS
Tran Date" along with the "Prior Operation Sequence Number" I could then
create: Any Type Of: Priority Dispatch, Shop Load, Stalled WIP, Job or
Operation Through Put Time analysis, etc... Reports. Also combinations A
Shop Load that shows Jobs Expected or Available etc...


Patrick J. Winter
Information Services Manager
sSc Specialty Screw Corporation
Vantage 4.00.901

-----Original Message-----
From: Diane Rowberry [mailto:diane.rowberry@...]
Sent: Thursday, November 30, 2000 02:12 PM
To: vantage@egroups.com
Subject: RE: [Vantage] Plant Schedule Visibility


Marc,

We are also Classic to Vantage users and I would like to sign on your call -
please refresh my memory on how to do this? I signed on to the Epicor
website and went into support - I thought that it was in the eranet area,
but it will only look at my calls, not other user calls. I would love to
support you on this one.

Diane Rowberry
Westwood Precision, Inc.
425-742-7011 ex 43


-----Original Message-----
From: Marc Durre [mailto:mdurre@...]
Sent: Tuesday, November 28, 2000 6:10 AM
To: vantage@egroups.com
Subject: RE: [Vantage] Plant Schedule Visibility


We are a job shop that moved from Classic to Vantage and are very
disappointed with the Priority Dispatch List in Vantage. The one in In
Classic was so much better. Besides what is on the Vantage PDL it also
included material information (Part no. & Description) Previous Workcenter,
Next Workcenter, days late, and if the previous workcenter had started the
no. of parts completed. This was very helpful for operators of first cut
operations they could group jobs of the same material together, this would
save time on setups and was very efficient. We put in a suggested
enhancement to change the PDL to be the same as in Classic it is call#
495696mps and document # 3246mps. Sign on to it.

Marc Durre
Durre Bros.

-----Original Message-----
From: Diane Rowberry [mailto:diane.rowberry@...]
Sent: Monday, November 27, 2000 11:27 AM
To: vantage@egroups.com
Subject: RE: [Vantage] Plant Schedule Visibility


I print the priority dispatch report for each machine (three months out) and
number the items in the order they need to run, add any pertanent
information (material availability etc) and make copies of it for all the
lead people and management. I do this twice a week in conjunction with a
production meeting. It seems to work well for us. HTH

Diane Rowberry
Westwood Precision, Inc.
(425)742-7011 ex 43


-----Original Message-----
From: JEFFTKELLY@... [mailto:JEFFTKELLY@...]
Sent: Monday, November 27, 2000 9:14 AM
To: vantage@egroups.com
Subject: [Vantage] Plant Schedule Visibility


Hi Everyone,

We are in the process of desinging a schedule board to be located in our
shop
to show the current work in house and due dates. This would be something
that is manually updated. It would not be any great detail or be used to
schedule, but to give employees an idea of where we are in production.

I am hoping that some of you have something similar that you can share
information about. Any input will be appreciated.

Thanks, Jeff Kelly
Youngberg Industries, Inc.



We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)




We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)
8
Pat,

Rumor has it that the "Last Labor Date" will be added to the JOBOPER record
with the next release so you don't have to skim through the labor detail
records trying to find the last date. I have no idea on the other fields.
Didn't you have a V 5.0 test DB ?

Todd

-----Original Message-----
From: Winter, Patrick [mailto:pjw@...]
Sent: Friday, December 01, 2000 7:53 AM
To: 'vantage@egroups.com'
Subject: RE: [Vantage] Plant Schedule Visibility


I will give you another spin on this topic. I would like to see changes to
the JobOper table to make it easier for us to write any Report Builder
Report for production control or manufacturing. If each JobOper record would
keep the "First Labor Date or OSS Tran Date" and the "Last Labor Date or OSS
Tran Date" along with the "Prior Operation Sequence Number" I could then
create: Any Type Of: Priority Dispatch, Shop Load, Stalled WIP, Job or
Operation Through Put Time analysis, etc... Reports. Also combinations A
Shop Load that shows Jobs Expected or Available etc...


Patrick J. Winter
Information Services Manager
sSc Specialty Screw Corporation
Vantage 4.00.901

-----Original Message-----
From: Diane Rowberry [mailto:diane.rowberry@...]
Sent: Thursday, November 30, 2000 02:12 PM
To: vantage@egroups.com
Subject: RE: [Vantage] Plant Schedule Visibility


Marc,

We are also Classic to Vantage users and I would like to sign on your call -
please refresh my memory on how to do this? I signed on to the Epicor
website and went into support - I thought that it was in the eranet area,
but it will only look at my calls, not other user calls. I would love to
support you on this one.

Diane Rowberry
Westwood Precision, Inc.
425-742-7011 ex 43


-----Original Message-----
From: Marc Durre [mailto:mdurre@...]
Sent: Tuesday, November 28, 2000 6:10 AM
To: vantage@egroups.com
Subject: RE: [Vantage] Plant Schedule Visibility


We are a job shop that moved from Classic to Vantage and are very
disappointed with the Priority Dispatch List in Vantage. The one in In
Classic was so much better. Besides what is on the Vantage PDL it also
included material information (Part no. & Description) Previous Workcenter,
Next Workcenter, days late, and if the previous workcenter had started the
no. of parts completed. This was very helpful for operators of first cut
operations they could group jobs of the same material together, this would
save time on setups and was very efficient. We put in a suggested
enhancement to change the PDL to be the same as in Classic it is call#
495696mps and document # 3246mps. Sign on to it.

Marc Durre
Durre Bros.

-----Original Message-----
From: Diane Rowberry [mailto:diane.rowberry@...]
Sent: Monday, November 27, 2000 11:27 AM
To: vantage@egroups.com
Subject: RE: [Vantage] Plant Schedule Visibility


I print the priority dispatch report for each machine (three months out) and
number the items in the order they need to run, add any pertanent
information (material availability etc) and make copies of it for all the
lead people and management. I do this twice a week in conjunction with a
production meeting. It seems to work well for us. HTH

Diane Rowberry
Westwood Precision, Inc.
(425)742-7011 ex 43


-----Original Message-----
From: JEFFTKELLY@... [mailto:JEFFTKELLY@...]
Sent: Monday, November 27, 2000 9:14 AM
To: vantage@egroups.com
Subject: [Vantage] Plant Schedule Visibility


Hi Everyone,

We are in the process of desinging a schedule board to be located in our
shop
to show the current work in house and due dates. This would be something
that is manually updated. It would not be any great detail or be used to
schedule, but to give employees an idea of where we are in production.

I am hoping that some of you have something similar that you can share
information about. Any input will be appreciated.

Thanks, Jeff Kelly
Youngberg Industries, Inc.



We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
<http://www.egroups.com/files/vantage/>
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)




We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
<http://www.egroups.com/files/vantage/>
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)


eGroups Sponsor

<http://rd.yahoo.com/M=80940.939512.2648849.2/D=egroupmail/S=1700007183:N/A=
502270/*http://www.lowestfare.com/cgi-bin/gx.cgi/AppLogic+lowestfare.home.Ho
me?div=YAHOO&dept=RONB> Travel Over to Lowestfare.com!
Travel Over to Lowestfare.com!

We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
<http://www.egroups.com/files/vantage/>
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)
9
The last labor date was added to the JobOpr table for eMfg 5.0

> Mark Pladson
> Product Manager
> eManufacturing Powered by Vantage
> Epicor Software Corporation
> www.epicor.com
> Phone # 952-417-5187
> Fax # 952-582-5478
> email address MPladson@...
>


-----Original Message-----
From: Todd Anderson [mailto:tanderson@...]
Sent: Friday, December 01, 2000 8:13 AM
To: 'vantage@egroups.com'
Subject: RE: [Vantage] Plant Schedule Visibility


Pat,

Rumor has it that the "Last Labor Date" will be added to the JOBOPER record
with the next release so you don't have to skim through the labor detail
records trying to find the last date. I have no idea on the other fields.
Didn't you have a V 5.0 test DB ?

Todd

-----Original Message-----
From: Winter, Patrick [mailto:pjw@...]
Sent: Friday, December 01, 2000 7:53 AM
To: 'vantage@egroups.com'
Subject: RE: [Vantage] Plant Schedule Visibility


I will give you another spin on this topic. I would like to see changes to
the JobOper table to make it easier for us to write any Report Builder
Report for production control or manufacturing. If each JobOper record would
keep the "First Labor Date or OSS Tran Date" and the "Last Labor Date or OSS
Tran Date" along with the "Prior Operation Sequence Number" I could then
create: Any Type Of: Priority Dispatch, Shop Load, Stalled WIP, Job or
Operation Through Put Time analysis, etc... Reports. Also combinations A
Shop Load that shows Jobs Expected or Available etc...


Patrick J. Winter
Information Services Manager
sSc Specialty Screw Corporation
Vantage 4.00.901

-----Original Message-----
From: Diane Rowberry [mailto:diane.rowberry@...]
Sent: Thursday, November 30, 2000 02:12 PM
To: vantage@egroups.com
Subject: RE: [Vantage] Plant Schedule Visibility


Marc,

We are also Classic to Vantage users and I would like to sign on your call -
please refresh my memory on how to do this? I signed on to the Epicor
website and went into support - I thought that it was in the eranet area,
but it will only look at my calls, not other user calls. I would love to
support you on this one.

Diane Rowberry
Westwood Precision, Inc.
425-742-7011 ex 43


-----Original Message-----
From: Marc Durre [mailto:mdurre@...]
Sent: Tuesday, November 28, 2000 6:10 AM
To: vantage@egroups.com
Subject: RE: [Vantage] Plant Schedule Visibility


We are a job shop that moved from Classic to Vantage and are very
disappointed with the Priority Dispatch List in Vantage. The one in In
Classic was so much better. Besides what is on the Vantage PDL it also
included material information (Part no. & Description) Previous Workcenter,
Next Workcenter, days late, and if the previous workcenter had started the
no. of parts completed. This was very helpful for operators of first cut
operations they could group jobs of the same material together, this would
save time on setups and was very efficient. We put in a suggested
enhancement to change the PDL to be the same as in Classic it is call#
495696mps and document # 3246mps. Sign on to it.

Marc Durre
Durre Bros.

-----Original Message-----
From: Diane Rowberry [mailto:diane.rowberry@...]
Sent: Monday, November 27, 2000 11:27 AM
To: vantage@egroups.com
Subject: RE: [Vantage] Plant Schedule Visibility


I print the priority dispatch report for each machine (three months out) and
number the items in the order they need to run, add any pertanent
information (material availability etc) and make copies of it for all the
lead people and management. I do this twice a week in conjunction with a
production meeting. It seems to work well for us. HTH

Diane Rowberry
Westwood Precision, Inc.
(425)742-7011 ex 43


-----Original Message-----
From: JEFFTKELLY@... [mailto:JEFFTKELLY@...]
Sent: Monday, November 27, 2000 9:14 AM
To: vantage@egroups.com
Subject: [Vantage] Plant Schedule Visibility


Hi Everyone,

We are in the process of desinging a schedule board to be located in our
shop
to show the current work in house and due dates. This would be something
that is manually updated. It would not be any great detail or be used to
schedule, but to give employees an idea of where we are in production.

I am hoping that some of you have something similar that you can share
information about. Any input will be appreciated.

Thanks, Jeff Kelly
Youngberg Industries, Inc.



We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
<http://www.egroups.com/files/vantage/>
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)




We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
<http://www.egroups.com/files/vantage/>
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)


eGroups Sponsor

<http://rd.yahoo.com/M=80940.939512.2648849.2/D=egroupmail/S=1700007183:N/A=
502270/*http://www.lowestfare.com/cgi-bin/gx.cgi/AppLogic+lowestfare.home.Ho
me?div=YAHOO&dept=RONB> Travel Over to Lowestfare.com!
Travel Over to Lowestfare.com!

We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
<http://www.egroups.com/files/vantage/>
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)




We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)
10
Yes, I got 5.0 on early access, but you never know what they are going to
addin or take out at the last minute.

Patrick J. Winter
Information Services Manager
sSc Specialty Screw Corporation
Vantage 4.00.901

-----Original Message-----
From: Todd Anderson [mailto:tanderson@...]
Sent: Friday, December 01, 2000 08:13 AM
To: 'vantage@egroups.com'
Subject: RE: [Vantage] Plant Schedule Visibility


Pat,

Rumor has it that the "Last Labor Date" will be added to the JOBOPER record
with the next release so you don't have to skim through the labor detail
records trying to find the last date. I have no idea on the other fields.
Didn't you have a V 5.0 test DB ?

Todd
11
Mark

If the operation is a subcontract will it post the last transaction date to
that field.

Patrick

-----Original Message-----
From: Mark Pladson [mailto:mpladson@...]
Sent: Friday, December 01, 2000 10:29 AM
To: 'vantage@egroups.com'
Subject: RE: [Vantage] Plant Schedule Visibility


The last labor date was added to the JobOpr table for eMfg 5.0

> Mark Pladson
> Product Manager
> eManufacturing Powered by Vantage
> Epicor Software Corporation
> www.epicor.com
> Phone # 952-417-5187
> Fax # 952-582-5478
> email address MPladson@...
>


-----Original Message-----
From: Todd Anderson [mailto:tanderson@...]
Sent: Friday, December 01, 2000 8:13 AM
To: 'vantage@egroups.com'
Subject: RE: [Vantage] Plant Schedule Visibility


Pat,

Rumor has it that the "Last Labor Date" will be added to the JOBOPER record
with the next release so you don't have to skim through the labor detail
records trying to find the last date. I have no idea on the other fields.
Didn't you have a V 5.0 test DB ?

Todd

-----Original Message-----
From: Winter, Patrick [mailto:pjw@...]
Sent: Friday, December 01, 2000 7:53 AM
To: 'vantage@egroups.com'
Subject: RE: [Vantage] Plant Schedule Visibility


I will give you another spin on this topic. I would like to see changes to
the JobOper table to make it easier for us to write any Report Builder
Report for production control or manufacturing. If each JobOper record would
keep the "First Labor Date or OSS Tran Date" and the "Last Labor Date or OSS
Tran Date" along with the "Prior Operation Sequence Number" I could then
create: Any Type Of: Priority Dispatch, Shop Load, Stalled WIP, Job or
Operation Through Put Time analysis, etc... Reports. Also combinations A
Shop Load that shows Jobs Expected or Available etc...


Patrick J. Winter
Information Services Manager
sSc Specialty Screw Corporation
Vantage 4.00.901

-----Original Message-----
From: Diane Rowberry [mailto:diane.rowberry@...]
Sent: Thursday, November 30, 2000 02:12 PM
To: vantage@egroups.com
Subject: RE: [Vantage] Plant Schedule Visibility


Marc,

We are also Classic to Vantage users and I would like to sign on your call -
please refresh my memory on how to do this? I signed on to the Epicor
website and went into support - I thought that it was in the eranet area,
but it will only look at my calls, not other user calls. I would love to
support you on this one.

Diane Rowberry
Westwood Precision, Inc.
425-742-7011 ex 43


-----Original Message-----
From: Marc Durre [mailto:mdurre@...]
Sent: Tuesday, November 28, 2000 6:10 AM
To: vantage@egroups.com
Subject: RE: [Vantage] Plant Schedule Visibility


We are a job shop that moved from Classic to Vantage and are very
disappointed with the Priority Dispatch List in Vantage. The one in In
Classic was so much better. Besides what is on the Vantage PDL it also
included material information (Part no. & Description) Previous Workcenter,
Next Workcenter, days late, and if the previous workcenter had started the
no. of parts completed. This was very helpful for operators of first cut
operations they could group jobs of the same material together, this would
save time on setups and was very efficient. We put in a suggested
enhancement to change the PDL to be the same as in Classic it is call#
495696mps and document # 3246mps. Sign on to it.

Marc Durre
Durre Bros.

-----Original Message-----
From: Diane Rowberry [mailto:diane.rowberry@...]
Sent: Monday, November 27, 2000 11:27 AM
To: vantage@egroups.com
Subject: RE: [Vantage] Plant Schedule Visibility


I print the priority dispatch report for each machine (three months out) and
number the items in the order they need to run, add any pertanent
information (material availability etc) and make copies of it for all the
lead people and management. I do this twice a week in conjunction with a
production meeting. It seems to work well for us. HTH

Diane Rowberry
Westwood Precision, Inc.
(425)742-7011 ex 43


-----Original Message-----
From: JEFFTKELLY@... [mailto:JEFFTKELLY@...]
Sent: Monday, November 27, 2000 9:14 AM
To: vantage@egroups.com
Subject: [Vantage] Plant Schedule Visibility


Hi Everyone,

We are in the process of desinging a schedule board to be located in our
shop
to show the current work in house and due dates. This would be something
that is manually updated. It would not be any great detail or be used to
schedule, but to give employees an idea of where we are in production.

I am hoping that some of you have something similar that you can share
information about. Any input will be appreciated.

Thanks, Jeff Kelly
Youngberg Industries, Inc.



We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
<http://www.egroups.com/files/vantage/>
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)




We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
<http://www.egroups.com/files/vantage/>
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)


eGroups Sponsor

<http://rd.yahoo.com/M=80940.939512.2648849.2/D=egroupmail/S=1700007183:N/A=
502270/*http://www.lowestfare.com/cgi-bin/gx.cgi/AppLogic+lowestfare.home.Ho
me?div=YAHOO&dept=RONB> Travel Over to Lowestfare.com!
Travel Over to Lowestfare.com!

We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
<http://www.egroups.com/files/vantage/>
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)




We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)


We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)