I am on 4.00.901

We just noticed that the Miscellaneous charges on the PO Form are not being
added to the total cost. I wasn't sure why, but our form is modified, so I
went to check the original PO form that came with vantage and I get errors
when I try to view it (from within crystal). So I tried to do a verify and
there are lots of fields that are not properly mapped. Does anybody have a
PO Form that works with this release/patch level that they could email to
me???

Thanks!

Sarah

Sarah,

Did you clean out the c:\vntgwork directory before you tried to load the vantage PO form that came with vantage.
Also you should do a print preview with the default vantage PO form this will load the DBF files in the work directory.
Then load and verify the database report in Crystal.

I hope this help

Jeff

sarah.vareschi@... wrote:

> I am on 4.00.901
>
> We just noticed that the Miscellaneous charges on the PO Form are not being
> added to the total cost. I wasn't sure why, but our form is modified, so I
> went to check the original PO form that came with vantage and I get errors
> when I try to view it (from within crystal). So I tried to do a verify and
> there are lots of fields that are not properly mapped. Does anybody have a
> PO Form that works with this release/patch level that they could email to
> me???
>
> Thanks!
>
> Sarah
>

At 10:01 AM 1/10/2001 , you wrote:

>In Vantage 4.0, the PO form doesn't print in the correct Due Date
>order. Has anyone modified the Crystal Reports form for this? I
>contacted support and they sent me a modified version, but although
>it fixes that problem, it has another problem.

I think you can just add the release dates to the sort sequence in your
working PO form. Podetail.PORel I think it is?? What is botched up in the
updated one they sent you? We're supposedly doing the 4.0 update soon now
(after a 7 month delay) and I'd like to make sure it's not in mine!

-Wayne Cox

Wayne,

In the updated one they sent me, the whole bottom half is shaded in,
rather than just the header line. I tried changing that, but didn't
have much luck. Seems like it would be simple, but somehow I
couldn't get it there.

Denise

--- In vantage@egroups.com, Wayne Cox <wmc@u...> wrote:
> At 10:01 AM 1/10/2001 , you wrote:
> >In Vantage 4.0, the PO form doesn't print in the correct Due Date
> >order. Has anyone modified the Crystal Reports form for this? I
> >contacted support and they sent me a modified version, but although
> >it fixes that problem, it has another problem.
>
> I think you can just add the release dates to the sort sequence in
your
> working PO form. Podetail.PORel I think it is?? What is botched
up in the
> updated one they sent you? We're supposedly doing the 4.0 update
soon now
> (after a 7 month delay) and I'd like to make sure it's not in mine!
>
> -Wayne Cox

Right click on the section and click on Don't Suppress or Don't Hide. That will enable the section to be viewed.

Ted Kitch
ted@...

----- Original Message -----
From: Denise Brown
To: vantage@egroups.com
Sent: Wednesday, January 10, 2001 9:30 AM
Subject: [Vantage] Re: PO Form

Wayne,

In the updated one they sent me, the whole bottom half is shaded in,
rather than just the header line. I tried changing that, but didn't
have much luck. Seems like it would be simple, but somehow I
couldn't get it there.

Denise

--- In vantage@egroups.com, Wayne Cox <wmc@u...> wrote:
> At 10:01 AM 1/10/2001 , you wrote:
> >In Vantage 4.0, the PO form doesn't print in the correct Due Date
> >order. Has anyone modified the Crystal Reports form for this? I
> >contacted support and they sent me a modified version, but although
> >it fixes that problem, it has another problem.
>
> I think you can just add the release dates to the sort sequence in
your
> working PO form. Podetail.PORel I think it is?? What is botched
up in the
> updated one they sent you? We're supposedly doing the 4.0 update
soon now
> (after a 7 month delay) and I'd like to make sure it's not in mine!
>
> -Wayne Cox

eGroups Sponsor

Click here to Win a 2001 Acura MDX

We no longer allow attachments to files. To access/share Report Files, please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to www.egroups.com, login and be sure to save your password, choose My Groups, choose Vantage, then choose Files. If you save the password, the link above will work the next time you try it.)

[Non-text portions of this message have been removed]

I think I remember this problem on our PO form. If it's the same, the
problem is that the shaded box around the headings for the lines is
overlapping onto the details for those lines, thereby shading the entire
bottom of the PO. To fix this, open the PO form in Crystal and extend the
PHe section so that it is a little longer than the box in the section. This
solved the problem for us.

----- Original Message -----
In the updated one they sent me, the whole bottom half is shaded in,
rather than just the header line.

Ted,

The shading occurs in the printing of a PO. The detail is there,
it's just all printed within a box, like the header line is.

Denise

--- In vantage@egroups.com, "Ted Kitch" <ted@m...> wrote:
> Right click on the section and click on Don't Suppress or Don't
Hide. That will enable the section to be viewed.
>
> Ted Kitch
> ted@m...
> ----- Original Message -----
> From: Denise Brown
> To: vantage@egroups.com
> Sent: Wednesday, January 10, 2001 9:30 AM
> Subject: [Vantage] Re: PO Form
>
>
> Wayne,
>
> In the updated one they sent me, the whole bottom half is shaded
in,
> rather than just the header line. I tried changing that, but
didn't
> have much luck. Seems like it would be simple, but somehow I
> couldn't get it there.
>
> Denise
>
> --- In vantage@egroups.com, Wayne Cox <wmc@u...> wrote:
> > At 10:01 AM 1/10/2001 , you wrote:
> > >In Vantage 4.0, the PO form doesn't print in the correct Due
Date
> > >order. Has anyone modified the Crystal Reports form for
this? I
> > >contacted support and they sent me a modified version, but
although
> > >it fixes that problem, it has another problem.
> >
> > I think you can just add the release dates to the sort sequence
in
> your
> > working PO form. Podetail.PORel I think it is?? What is
botched
> up in the
> > updated one they sent you? We're supposedly doing the 4.0
update
> soon now
> > (after a 7 month delay) and I'd like to make sure it's not in
mine!
> >
> > -Wayne Cox
>
>
> eGroups Sponsor
>
> Click here to Win a 2001 Acura MDX
>
> We no longer allow attachments to files. To access/share Report
Files, please go to the following link:
http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time you try
it, go to www.egroups.com, login and be sure to save your password,
choose My Groups, choose Vantage, then choose Files. If you save the
password, the link above will work the next time you try it.)
>
>
>
> [Non-text portions of this message have been removed]

Gary,
I like to:
Insert
Special Field
Page N of M
for my page numbers
that way it give you Page 1 of 3 etc.
HOpe this helps.
Nancy Dunn
Winco Inc.

-----Original Message-----
From: Gary Wassing [mailto:gwassing@...]
Sent: Wednesday, February 20, 2002 8:56 PM
To: 'vantage@yahoogroups.com'
Subject: [Vantage] PO Form

Dumb question. The page number on my P.O. form stays at 1 no matter how
many pages there are. I'm not a big crystal user, could any give me an idea
on how to fix this.
Thanks.

--
Gary Wassing
Systems Administrator
SteelCraft Industries
gwassing@...

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

This is generally a printer driver issue. Epicor suggests using LaserJet II
drivers if my memory serves me correctly.

Edward F. Fox, Jr., CPA
Controller
Maxson Automatic Machinery Company
Phone: 401-596-0162 x110
Fax: 401-596-1050
www.maxsonautomatic.com

-----Original Message-----
From: rmrindler [mailto:rrindler@...]
Sent: Monday, March 10, 2003 11:10 AM
To: vantage@yahoogroups.com
Subject: [Vantage] PO Form

I did the upgrade to version 5.2 over the weekend, and now, the
Purchase Orders have a gray background. Does anybody know how to get
the background changed back to white? It is nearly impossible to get
the faxes to look right with the gray background.

Thanks.

Ryan M. Rindler
Norwood Tool Company
937-228-4101

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

You can edit the POForm.rpt file, which is located in your
x:\vantage\userform folder. In the form, select the areas that have the
gray color and change the format for the field. Probably there is a
background setting, which you can set to "white".

Troy Funte
Liberty Electronics

-----Original Message-----
From: rmrindler [mailto:rrindler@...]
Sent: Monday, March 10, 2003 11:10 AM
To: vantage@yahoogroups.com
Subject: [Vantage] PO Form

I did the upgrade to version 5.2 over the weekend, and now, the
Purchase Orders have a gray background. Does anybody know how to get
the background changed back to white? It is nearly impossible to get
the faxes to look right with the gray background.

Thanks.

Ryan M. Rindler
Norwood Tool Company
937-228-4101

Yahoo! Groups Sponsor
ADVERTISEMENT

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]

I ran into this on several machines
One system it woudl look fine
The next it would have the gray backfround
You need to do a couple of things

Frist Make sure you are using a PCL5 driver instead of the PCL6

Then log out of vantage

Navigate to your Vantage directoy - Depending on the machine (AKA
your have report builder on it or something else) you can have up to
three directories
Open the folders and clean them all out
Empty your recylce BIN

Go back to Vantage
Print the PO and try printing it with the print preview option ON

Print Preview then print it

Hope that helps

James Piper
Meco Inc

Thanks...I will give it a try.

Ryan

> I ran into this on several machines
> One system it woudl look fine
> The next it would have the gray backfround
> You need to do a couple of things
>
> Frist Make sure you are using a PCL5 driver instead of the PCL6
>
> Then log out of vantage
>
> Navigate to your Vantage directoy - Depending on the machine (AKA
> your have report builder on it or something else) you can have up

> three directories
> Open the folders and clean them all out
> Empty your recylce BIN
>
> Go back to Vantage
> Print the PO and try printing it with the print preview option ON
>
> Print Preview then print it
>
> Hope that helps
>
> James Piper
> Meco Inc

Unfortunately, I tried this, and it didn't work. Thanks for the
suggestion, though.

Ryan

> You can edit the POForm.rpt file, which is located in your
> x:\vantage\userform folder. In the form, select the areas that

have the

> gray color and change the format for the field. Probably there is a
> background setting, which you can set to "white".
>
> Troy Funte
> Liberty Electronics
>
> -----Original Message-----
> From: rmrindler [mailto:rrindler@n...]
> Sent: Monday, March 10, 2003 11:10 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] PO Form
>
>
> I did the upgrade to version 5.2 over the weekend, and now, the
> Purchase Orders have a gray background. Does anybody know how to

get

> the background changed back to white? It is nearly impossible to

get

> the faxes to look right with the gray background.
>
> Thanks.
>
> Ryan M. Rindler
> Norwood Tool Company
> 937-228-4101
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You

must

> have already linked your email address to a yahoo id to enable

access. )

> (1) To access the Files Section of our Yahoo!Group for Report

Builder and

> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of

Service.

>
>
> [Non-text portions of this message have been removed]