Progress 8.3

Shhh. We won't tell anyone, will we list?
----- Original Message -----
From: Chris Robisch
To: vantage@yahoogroups.com
Sent: Thursday, March 14, 2002 11:53 AM
Subject: Re: [Vantage] Progress 8.3


Please don't tell anyone where you got it. Epicor is touchy about this kind
of thing.
----- Original Message -----
From: "Ron Newell" <rnewell@...>
To: <vantage@yahoogroups.com>
Sent: Thursday, March 14, 2002 5:21 AM
Subject: [Vantage] Progress 8.3


> Hi All,
>
> I am hoping someone can help me. I am looking for a copy of epicor's
> install instructions for Progress 8.3. If anyone has a copy could you
> fax them to me at 204-774-0689 of e-mail me at
> rnewell@....
>
> Thanks,
>
> Ron Newell
> IT Manager
> Neon Products
> 1695 Sargent Ave.
> Winnipeg, MB R3H 0C4
>
> http://www.neon-products.com/
> mailto:rnewell@...
>
>
>
> This information sent is intended only for the person or entity to which
it is addressed and may contain confidential and/or privileged material. Any
review, retransmission, dissemination or other use of, or talking of any
action in reliance upon, this information by persons or entities other than
the intended recipient is prohibited. If you received this in error, please
contact the sender and delete the material from any storage devices.
>
> This message was checked by Norton AntiVirus for all known Viruses .
> www.neon-products.com
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>


[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor
ADVERTISEMENT




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]
I am setting up a cobbled up test server from 3 computers make 1. What
version of progress should I be installing with 5.0??

Any words of wisdom?

John Memmelaar Jr
Royal Master Grinders, Inc
143 Bauer Drive
Oakland, NJ 07436
Phone: 001-201-337-8500
Fax: 001-201-337-2324
E-mail: johnjr@...
John,
5.0 comes with Progress 9.1A on the CD, but I believe you can also run it under 9.1C which comes with 5.1.

Troy Funte
Liberty Electronics

----- Original Message -----
From: johnmemjr@...
To: vantage@yahoogroups.com
Sent: Friday, December 28, 2001 11:03 AM
Subject: [Vantage] Install 5.0 as a Fresh Install


I am setting up a cobbled up test server from 3 computers make 1. What
version of progress should I be installing with 5.0??

Any words of wisdom?

John Memmelaar Jr
Royal Master Grinders, Inc
143 Bauer Drive
Oakland, NJ 07436
Phone: 001-201-337-8500
Fax: 001-201-337-2324
E-mail: johnjr@...

Yahoo! Groups Sponsor
ADVERTISEMENT




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]
>I believe you can also run it under 9.1C which comes with 5.1.

I tried to do this, and the installation went OK, but when I actually went
to run vantage there was a CRC error. This is because the CRC codes in 5.0
(which we can't change) are only compatible with Progress 9.1A

In otherwords, VANTAGE 5.0 WIll NOT WORK WITH PROGRESS 9.1C, and will only
work with the version it was compiled under, 9.1A.

Thaddeus

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Saturday, December 29, 2001 1:01 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Install 5.0 as a Fresh Install



John,
5.0 comes with Progress 9.1A on the CD, but I believe you can also run it
under 9.1C which comes with 5.1.

Troy Funte
Liberty Electronics

----- Original Message -----
From: johnmemjr@...
To: vantage@yahoogroups.com
Sent: Friday, December 28, 2001 11:03 AM
Subject: [Vantage] Install 5.0 as a Fresh Install


I am setting up a cobbled up test server from 3 computers make 1. What
version of progress should I be installing with 5.0??

Any words of wisdom?

John Memmelaar Jr
Royal Master Grinders, Inc
143 Bauer Drive
Oakland, NJ 07436
Phone: 001-201-337-8500
Fax: 001-201-337-2324
E-mail: johnjr@...

Yahoo! Groups Sponsor
ADVERTISEMENT




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Vantage 5.0 will run with 9.1c. I upgraded to 5.0 in January, with 9.1c
from the beginning with no problems. Epicor Tech Support recommended that I
use 9.1c when I upgraded if I had it available.

Norm Watkins
ELECPAC
This is partially correct. I believe the problem is running Vantage itself
(i.e. the client) under version 9.1C. However, the Progress 9.1C server can
run the Vantage 5.0 version 9.1A database with no problems.

Rick Lane
Intelligent Systems Integration, Inc.
600 Weber Drive
Wadsworth, OH 44281
PH: 330-335-5291
FX: 330-335-7275

"Helping Business Make Intelligent Use of Technology"


-----Original Message-----
From: Thad Jacobs [mailto:tjacobs@...]
Sent: Wednesday, March 13, 2002 12:06 PM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Install 5.0 as a Fresh Install


>I believe you can also run it under 9.1C which comes with 5.1.

I tried to do this, and the installation went OK, but when I actually went
to run vantage there was a CRC error. This is because the CRC codes in 5.0
(which we can't change) are only compatible with Progress 9.1A

In otherwords, VANTAGE 5.0 WIll NOT WORK WITH PROGRESS 9.1C, and will only
work with the version it was compiled under, 9.1A.

Thaddeus

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Saturday, December 29, 2001 1:01 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Install 5.0 as a Fresh Install



John,
5.0 comes with Progress 9.1A on the CD, but I believe you can also run it
under 9.1C which comes with 5.1.

Troy Funte
Liberty Electronics

----- Original Message -----
From: johnmemjr@...
To: vantage@yahoogroups.com
Sent: Friday, December 28, 2001 11:03 AM
Subject: [Vantage] Install 5.0 as a Fresh Install


I am setting up a cobbled up test server from 3 computers make 1. What
version of progress should I be installing with 5.0??

Any words of wisdom?

John Memmelaar Jr
Royal Master Grinders, Inc
143 Bauer Drive
Oakland, NJ 07436
Phone: 001-201-337-8500
Fax: 001-201-337-2324
E-mail: johnjr@...

Yahoo! Groups Sponsor
ADVERTISEMENT




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
test



[Non-text portions of this message have been removed]
Thad,
Are you using Progress Explorer Tool? I concur with the others that it is possible to Run Vantage 5.0 with 9.1C. However, I don't know whether you may need to do the installation with 9.1A and then switch it over to 9.1C. I found this out when trying to run both 5.0 and 5.1 together on the same server and found that (with Progress Explorer) you HAVE to run 5.0 under 9.1C. It's simply a matter of making a new database with the approriate parameters in the P.E.

So, maybe you should install Vantage 5.0 as usual (with 9.1A), then install 9.1C and configure 5.0 with the 9.1C P.E. If you have questions, let me know.

Troy Funte
Liberty Electronics

-----Original Message-----
From: Thad Jacobs <tjacobs@...>
To: 'vantage@yahoogroups.com' <vantage@yahoogroups.com>
Date: Wednesday, March 13, 2002 12:05 PM
Subject: RE: [Vantage] Install 5.0 as a Fresh Install


>I believe you can also run it under 9.1C which comes with 5.1.

I tried to do this, and the installation went OK, but when I actually went
to run vantage there was a CRC error. This is because the CRC codes in 5.0
(which we can't change) are only compatible with Progress 9.1A

In otherwords, VANTAGE 5.0 WIll NOT WORK WITH PROGRESS 9.1C, and will only
work with the version it was compiled under, 9.1A.

Thaddeus

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Saturday, December 29, 2001 1:01 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Install 5.0 as a Fresh Install



John,
5.0 comes with Progress 9.1A on the CD, but I believe you can also run it
under 9.1C which comes with 5.1.

Troy Funte
Liberty Electronics

----- Original Message -----
From: johnmemjr@...
To: vantage@yahoogroups.com
Sent: Friday, December 28, 2001 11:03 AM
Subject: [Vantage] Install 5.0 as a Fresh Install


I am setting up a cobbled up test server from 3 computers make 1. What
version of progress should I be installing with 5.0??

Any words of wisdom?

John Memmelaar Jr
Royal Master Grinders, Inc
143 Bauer Drive
Oakland, NJ 07436
Phone: 001-201-337-8500
Fax: 001-201-337-2324
E-mail: johnjr@...

Yahoo! Groups Sponsor
ADVERTISEMENT




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


Yahoo! Groups Sponsor
ADVERTISEMENT




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]
At 01:53 PM 3/12/1996 -0500, you wrote:
>... install Vantage 5.0 as usual (with 9.1A), then install 9.1C and
>configure 5.0 with the 9.1C P.E.

Is 9.1C a patch that can be downloaded, and applied to a 9.1A
installation? Or does it need to be installed fresh?

-Wayne
9.1C is a complete new version of Progress which comes on the 5.1 CD. The patches for Progress versions are available from the progress website, I believe.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Wayne Cox
To: vantage@yahoogroups.com
Sent: Wednesday, March 13, 2002 2:07 PM
Subject: Re: [Vantage] Install 5.0 as a Fresh Install


At 01:53 PM 3/12/1996 -0500, you wrote:
>... install Vantage 5.0 as usual (with 9.1A), then install 9.1C and
>configure 5.0 with the 9.1C P.E.

Is 9.1C a patch that can be downloaded, and applied to a 9.1A
installation? Or does it need to be installed fresh?

-Wayne







Yahoo! Groups Sponsor
ADVERTISEMENT




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]
Did you just substitute 9.1a with 9.1c in the upgrade and conversions, or
did you switch to 9.1c afterwards?

I'd definitely prefer to do skip 9.1a entirely, but my initial attempt
failed.

Thaddeus
-----Original Message-----
From: nwatkins [mailto:nwatkins@...]
Sent: Wednesday, March 13, 2002 9:23 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Install 5.0 as a Fresh Install


Vantage 5.0 will run with 9.1c. I upgraded to 5.0 in January, with 9.1c
from the beginning with no problems. Epicor Tech Support recommended that I
use 9.1c when I upgraded if I had it available.

Norm Watkins
ELECPAC



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Thad,
Here's some interesting reading on the 9.1C issue. Unfortunately, the Progress 9.1C19 patch is not available on the Epicor website yet -- only on the Progress Website. (http://www.progress.com/patches/patchlst/91C-146v.htm)
Looks like a good target to be on 9.1C for Vantage 5.0 users if possible:

--------From the pa510117.wri file for Vantage 5.1 patch 117 ---------
XA Progress SCR 3330 5.10.117

Vantage installations running off of Progress 9.1C commit data at different times from installations off of Progress 9.1A. In other words, Progress 9.1A has a bug that is corrected as of Progress 9.1C19.

In particular, a job was entered with labor details, but the details were not appearing immediately until some other tasks were completed. However, this is not a Vantage bug. Upgrading to Progress 9.1C19 or later will resolve the data display issue.



----------------------------------------------------



Troy Funte

Liberty Electronics



----- Original Message -----
From: Thad Jacobs
To: 'vantage@yahoogroups.com'
Sent: Wednesday, March 13, 2002 7:17 PM
Subject: RE: [Vantage] Install 5.0 as a Fresh Install


Did you just substitute 9.1a with 9.1c in the upgrade and conversions, or
did you switch to 9.1c afterwards?

I'd definitely prefer to do skip 9.1a entirely, but my initial attempt
failed.

Thaddeus
-----Original Message-----
From: nwatkins [mailto:nwatkins@...]
Sent: Wednesday, March 13, 2002 9:23 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Install 5.0 as a Fresh Install


Vantage 5.0 will run with 9.1c. I upgraded to 5.0 in January, with 9.1c
from the beginning with no problems. Epicor Tech Support recommended that I
use 9.1c when I upgraded if I had it available.

Norm Watkins
ELECPAC



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


Yahoo! Groups Sponsor
ADVERTISEMENT




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]
I installed with 9.1c from the beginning, from the 5.1 cd, and then applied
the 9.1c15 patch, actually in an epic51 folder, as I am planning on
upgrading to 5.1 shortly. I mapped to the separate folders, one for vantage,
and one for progress.

Norm Watkins
Hi All,

I am hoping someone can help me. I am looking for a copy of epicor's
install instructions for Progress 8.3. If anyone has a copy could you
fax them to me at 204-774-0689 of e-mail me at
rnewell@....

Thanks,

Ron Newell
IT Manager
Neon Products
1695 Sargent Ave.
Winnipeg, MB R3H 0C4

http://www.neon-products.com/
mailto:rnewell@...



This information sent is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or talking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any storage devices.

This message was checked by Norton AntiVirus for all known Viruses .
www.neon-products.com
Please don't tell anyone where you got it. Epicor is touchy about this kind
of thing.
----- Original Message -----
From: "Ron Newell" <rnewell@...>
To: <vantage@yahoogroups.com>
Sent: Thursday, March 14, 2002 5:21 AM
Subject: [Vantage] Progress 8.3


> Hi All,
>
> I am hoping someone can help me. I am looking for a copy of epicor's
> install instructions for Progress 8.3. If anyone has a copy could you
> fax them to me at 204-774-0689 of e-mail me at
> rnewell@....
>
> Thanks,
>
> Ron Newell
> IT Manager
> Neon Products
> 1695 Sargent Ave.
> Winnipeg, MB R3H 0C4
>
> http://www.neon-products.com/
> mailto:rnewell@...
>
>
>
> This information sent is intended only for the person or entity to which
it is addressed and may contain confidential and/or privileged material. Any
review, retransmission, dissemination or other use of, or talking of any
action in reliance upon, this information by persons or entities other than
the intended recipient is prohibited. If you received this in error, please
contact the sender and delete the material from any storage devices.
>
> This message was checked by Norton AntiVirus for all known Viruses .
> www.neon-products.com
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>


[Non-text portions of this message have been removed]