Request Move check box while reporting a quantity from plant fl

Yahoo Archive
1
Thanks Tricia, that's what I thought, but the guys on the production
floor are swearing that sometimes the box is checked, and sometimes it
isn't. I know that even on the same job sometimes the stock shows up in
the material queue, and sometimes it doesn't. I have to write it off to
the fact that the box was not checked when they reported the quantity,
and was hoping for someone that understood better what caused the box to
default to checked.



Thanks again, and take care,



Steve





________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Tricia Simon
Sent: Thursday, June 29, 2006 9:39 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Request Move check box while reporting a quantity
from plant floor interface



Steve,

We've been using AMM for a few years now. According to Epicor, there is
no
way to change the default on the check box - it is part-and-parcel with
AMM.

Also, if it is moving from the same warehouse to the same warehouse (ex.
Production to Production) it will NOT show up in the Material Queue.
Going
from one warehouse to another (ex. Production to Finished OR Production
to
Inspection)is what causes it to show in Material Queue.

HTH

Tricia Simon, Controller
Riten Industries, Inc.

-----Original Message-----
From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ]On
Behalf
Of Steve Wirch
Sent: Wednesday, June 28, 2006 3:01 PM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: [Vantage] Request Move check box while reporting a quantity
from plant floor interface

Hi,

From the Plant floor module in Vantage, with the Advanced Materials
module, when you report a quantity, there is a request move check box.

Does anyone understand what causes this to default checked?

I also have reports of this being checked, but the material does not
show up in the material queue.

Any and all help and comments appreciated,

Thanks,

Steve

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
Yahoo! Groups Links

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
2
Hi,



From the Plant floor module in Vantage, with the Advanced Materials
module, when you report a quantity, there is a request move check box.



Does anyone understand what causes this to default checked?



I also have reports of this being checked, but the material does not
show up in the material queue.



Any and all help and comments appreciated,



Thanks,



Steve





[Non-text portions of this message have been removed]
3
Steve,

We've been using AMM for a few years now. According to Epicor, there is no
way to change the default on the check box - it is part-and-parcel with AMM.

Also, if it is moving from the same warehouse to the same warehouse (ex.
Production to Production) it will NOT show up in the Material Queue. Going
from one warehouse to another (ex. Production to Finished OR Production to
Inspection)is what causes it to show in Material Queue.

HTH

Tricia Simon, Controller
Riten Industries, Inc.


-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of Steve Wirch
Sent: Wednesday, June 28, 2006 3:01 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Request Move check box while reporting a quantity
from plant floor interface


Hi,



From the Plant floor module in Vantage, with the Advanced Materials
module, when you report a quantity, there is a request move check box.



Does anyone understand what causes this to default checked?



I also have reports of this being checked, but the material does not
show up in the material queue.



Any and all help and comments appreciated,



Thanks,



Steve





[Non-text portions of this message have been removed]




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links








[Non-text portions of this message have been removed]