An example would be:
First finished good off the line would have a serial number of 1
The second finished good off the line would have a serial number of 2 (
it does not matter what the part number is, it is the next serial
number)
The way Epicor wants it to work.
Part number with model number a, off the line get serial 1000
Part number with model number a , off the line gets serial 1001
New part number with model number a gets serial 1000
New part number with model number a gets serial 1001
Part number with model number b, off the line get serial 1000
Part number with model number b , off the line gets serial 1001
And so on. Then to look up by serial number you would need part number
and model number and serial number to get the correct info. We are a
simple shop and do not need a setup like this, but we do need to track
finished good by serial number.
Judd
Custom Hoists, Inc.
-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Alexander Gamble
Sent: Thursday, May 11, 2006 3:04 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Shiplist - Takes FOREVER..... ideas?
Judd,
You mention that you don't go by part number - was there something that
Epicor said about a serial number scheme / approach that would work
better
with the situation "as designed" (which is one of my favorite
phrases...)
- Alexander
________________________________
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of
Shearer, Judd
Sent: Thursday, May 11, 2006 1:29 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Shiplist - Takes FOREVER..... ideas?
We have the same problem here. Epicor Stopped working on the problem
weeks ago, it is by design.
We use the serial number table as a 1 2 3 (and so on).
We do not go by part number, model number, etc.
Anytime we are working with the serial numbers the users ( all ) have to
wait around 3 - 5 min now. I only see it getting worse.
Judd
Custom Hoists, Inc.
-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Alexander Gamble
Sent: Thursday, May 11, 2006 12:02 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Shiplist - Takes FOREVER..... ideas?
Charles,
Slow on the two machines I've tested, each with multiple users.
Haven't tried cleaning out the VNTGWORK directory, don't know how to do
that...
- Alexander
________________________________
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of
Charles Paluska - HPN
Sent: Thursday, May 11, 2006 9:50 AM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Shiplist - Takes FOREVER..... ideas?
Alexander,
What version are you running ?
Does it run faster on any other workstation in your facility - or is it
slow
everywhere ?
Have you tried cleaning out the VNTGWORK directory ?
Charles
First finished good off the line would have a serial number of 1
The second finished good off the line would have a serial number of 2 (
it does not matter what the part number is, it is the next serial
number)
The way Epicor wants it to work.
Part number with model number a, off the line get serial 1000
Part number with model number a , off the line gets serial 1001
New part number with model number a gets serial 1000
New part number with model number a gets serial 1001
Part number with model number b, off the line get serial 1000
Part number with model number b , off the line gets serial 1001
And so on. Then to look up by serial number you would need part number
and model number and serial number to get the correct info. We are a
simple shop and do not need a setup like this, but we do need to track
finished good by serial number.
Judd
Custom Hoists, Inc.
-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Alexander Gamble
Sent: Thursday, May 11, 2006 3:04 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Shiplist - Takes FOREVER..... ideas?
Judd,
You mention that you don't go by part number - was there something that
Epicor said about a serial number scheme / approach that would work
better
with the situation "as designed" (which is one of my favorite
phrases...)
- Alexander
________________________________
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of
Shearer, Judd
Sent: Thursday, May 11, 2006 1:29 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Shiplist - Takes FOREVER..... ideas?
We have the same problem here. Epicor Stopped working on the problem
weeks ago, it is by design.
We use the serial number table as a 1 2 3 (and so on).
We do not go by part number, model number, etc.
Anytime we are working with the serial numbers the users ( all ) have to
wait around 3 - 5 min now. I only see it getting worse.
Judd
Custom Hoists, Inc.
-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Alexander Gamble
Sent: Thursday, May 11, 2006 12:02 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Shiplist - Takes FOREVER..... ideas?
Charles,
Slow on the two machines I've tested, each with multiple users.
Haven't tried cleaning out the VNTGWORK directory, don't know how to do
that...
- Alexander
________________________________
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of
Charles Paluska - HPN
Sent: Thursday, May 11, 2006 9:50 AM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Shiplist - Takes FOREVER..... ideas?
Alexander,
What version are you running ?
Does it run faster on any other workstation in your facility - or is it
slow
everywhere ?
Have you tried cleaning out the VNTGWORK directory ?
Charles
----- Original Message -----
From: "Alexander Gamble" <alexanderg@...>
To: <vantage@yahoogroups.com>
Sent: Thursday, May 11, 2006 9:26 AM
Subject: [Vantage] Shiplist - Takes FOREVER..... ideas?
When our shipping folks try to put serial numbers to a packing list
line,
the
system locks and the screen goes funky so you can see the outline of the
application but the fields are blank.
Then there's a painfully long wait, and eventually the serial number
list
pops up.
Has anyone else had this problem? I've tried multiple user logins on
the
same hardware, and same user logins on multiple computers - so it's
something
systemic - either with our network, installation, or inherent to Vantage
I
think.
- Alexander
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
SPONSORED LINKS
Manufacturing software
<http://groups.yahoo.com/gads?t=ms&k=Manufacturing+software&w1=Manufactu
ring+
software&w2=Membership+database+software&w3=Database+mortgage+software&w
4=Pda
+database+software&w5=Database+management+software&w6=Database+marketing
+soft
ware&c=6&s=188&.sig=OG5F3819UOUOg63i0bu6kA> Membership database
software
<http://groups.yahoo.com/gads?t=ms&k=Membership+database+software&w1=Man
ufact
uring+software&w2=Membership+database+software&w3=Database+mortgage+soft
ware&
w4=Pda+database+software&w5=Database+management+software&w6=Database+mar
ketin
g+software&c=6&s=188&.sig=N5BGdur84p-jyuOomcQdbQ> Database
mortgage
software
<http://groups.yahoo.com/gads?t=ms&k=Database+mortgage+software&w1=Manuf
actur
ing+software&w2=Membership+database+software&w3=Database+mortgage+softwa
re&w4
=Pda+database+software&w5=Database+management+software&w6=Database+marke
ting+
software&c=6&s=188&.sig=8rvcSQnCqJhTCZu-0Si39A>
Pda database software
<http://groups.yahoo.com/gads?t=ms&k=Pda+database+software&w1=Manufactur
ing+s
oftware&w2=Membership+database+software&w3=Database+mortgage+software&w4
=Pda+
database+software&w5=Database+management+software&w6=Database+marketing+
softw
are&c=6&s=188&.sig=u3KQrTRPAQfsWIT39aHDkg> Database management
software
<http://groups.yahoo.com/gads?t=ms&k=Database+management+software&w1=Man
ufact
uring+software&w2=Membership+database+software&w3=Database+mortgage+soft
ware&
w4=Pda+database+software&w5=Database+management+software&w6=Database+mar
ketin
g+software&c=6&s=188&.sig=R3CF3ODPY4gwjDZjykQYvw> Database
marketing
software
<http://groups.yahoo.com/gads?t=ms&k=Database+marketing+software&w1=Manu
factu
ring+software&w2=Membership+database+software&w3=Database+mortgage+softw
are&w
4=Pda+database+software&w5=Database+management+software&w6=Database+mark
eting
+software&c=6&s=188&.sig=lmBkRUiBtvHI1u5dkymDcw>
________________________________
YAHOO! GROUPS LINKS
* Visit your group "vantage
<http://groups.yahoo.com/group/vantage> "
on the web.
* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
<http://docs.yahoo.com/info/terms/> .
________________________________
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
SPONSORED LINKS
Manufacturing software
<http://groups.yahoo.com/gads?t=ms&k=Manufacturing+software&w1=Manufactu
ring+
software&w2=Membership+database+software&w3=Database+mortgage+software&w
4=Pda
+database+software&w5=Database+management+software&w6=Database+marketing
+soft
ware&c=6&s=188&.sig=OG5F3819UOUOg63i0bu6kA> Membership database
software
<http://groups.yahoo.com/gads?t=ms&k=Membership+database+software&w1=Man
ufact
uring+software&w2=Membership+database+software&w3=Database+mortgage+soft
ware&
w4=Pda+database+software&w5=Database+management+software&w6=Database+mar
ketin
g+software&c=6&s=188&.sig=N5BGdur84p-jyuOomcQdbQ> Database
mortgage
software
<http://groups.yahoo.com/gads?t=ms&k=Database+mortgage+software&w1=Manuf
actur
ing+software&w2=Membership+database+software&w3=Database+mortgage+softwa
re&w4
=Pda+database+software&w5=Database+management+software&w6=Database+marke
ting+
software&c=6&s=188&.sig=8rvcSQnCqJhTCZu-0Si39A>
Pda database software
<http://groups.yahoo.com/gads?t=ms&k=Pda+database+software&w1=Manufactur
ing+s
oftware&w2=Membership+database+software&w3=Database+mortgage+software&w4
=Pda+
database+software&w5=Database+management+software&w6=Database+marketing+
softw
are&c=6&s=188&.sig=u3KQrTRPAQfsWIT39aHDkg> Database management
software
<http://groups.yahoo.com/gads?t=ms&k=Database+management+software&w1=Man
ufact
uring+software&w2=Membership+database+software&w3=Database+mortgage+soft
ware&
w4=Pda+database+software&w5=Database+management+software&w6=Database+mar
ketin
g+software&c=6&s=188&.sig=R3CF3ODPY4gwjDZjykQYvw> Database
marketing
software
<http://groups.yahoo.com/gads?t=ms&k=Database+marketing+software&w1=Manu
factu
ring+software&w2=Membership+database+software&w3=Database+mortgage+softw
are&w
4=Pda+database+software&w5=Database+management+software&w6=Database+mark
eting
+software&c=6&s=188&.sig=lmBkRUiBtvHI1u5dkymDcw>
________________________________
YAHOO! GROUPS LINKS
* Visit your group "vantage
<http://groups.yahoo.com/group/vantage> "
on the web.
* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
<http://docs.yahoo.com/info/terms/> .
________________________________
[Non-text portions of this message have been removed]
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links