We use Loftware's LLM product, and are happy with it.

George Brockman II
Gasket Engineering

-----Original Message-----
From: Justin Sorenson [SMTP:Justin@...]
Sent: Wednesday, December 06, 2000 8:13 AM
To: 'vantage@egroups.com'
Subject: [Vantage] Shipping Labels

We are wondering about what everyone uses for software for shipping
labels.
Is there software out there that can be used with Vantage, or is
there some
other third party software that can do this? Each of our customers
would
like a different format of barcode. Certain things on one line,
length of
the bar code etc. Any feedback on this will be greatly appreciated

Justin Sorenson
Network Administrator
Wire Maid Manufacturing Ltd.
PO Box 169
2714 Ross Avenue
Schofield, W 54476

Phone: (715) 359-0545
Fax: (715) 355-1353
Email: Justin@...

-------------------------- eGroups Sponsor

We no longer allow attachments to files. To access/share Report
Files, please go to the following link:
http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try
it, go to www.egroups.com, login and be sure to save your password, choose
My Groups, choose Vantage, then choose Files. If you save the password, the
link above will work the next time you try it.)

You can do this with the Crystal Reports shipping label in
Vantage. Set up certain fields to print based on the
customer ID or any other field. It'll take some effort
to set up but will work pretty good.

Justin Sorenson wrote:

>
> We are wondering about what everyone uses for software for shipping labels.
> Is there software out there that can be used with Vantage, or is there some
> other third party software that can do this? Each of our customers would
> like a different format of barcode. Certain things on one line, length of
> the bar code etc. Any feedback on this will be greatly appreciated
>
> Justin Sorenson
> Network Administrator
> Wire Maid Manufacturing Ltd.
> PO Box 169
> 2714 Ross Avenue
> Schofield, W 54476
>
> Phone: (715) 359-0545
> Fax: (715) 355-1353
> Email: Justin@...
>
>
> We no longer allow attachments to files. To access/share Report Files, please go to the following link: http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time you try it, go to www.egroups.com, login and be sure to save your password, choose My Groups, choose Vantage, then choose Files. If you save the password, the link above will work the next time you try it.)

We use Easylabel software. It works pretty good! We don't have it
interfaced with Vantage or anything. And, we just found out that GM is
going to require 2-D labels and our software is already capable of doing it!
We just need a different scanner.

Wendy Pursche
Network Administrator
Schmald Tool & Die, Inc.
(810) 743-1600 ext.323
wpursche@...

----- Original Message -----
From: Justin Sorenson <Justin@...>
To: <vantage@egroups.com>
Sent: Wednesday, December 06, 2000 9:13 AM
Subject: [Vantage] Shipping Labels

> We are wondering about what everyone uses for software for shipping
labels.
> Is there software out there that can be used with Vantage, or is there
some
> other third party software that can do this? Each of our customers would
> like a different format of barcode. Certain things on one line, length of
> the bar code etc. Any feedback on this will be greatly appreciated
>
> Justin Sorenson
> Network Administrator
> Wire Maid Manufacturing Ltd.
> PO Box 169
> 2714 Ross Avenue
> Schofield, W 54476
>
> Phone: (715) 359-0545
> Fax: (715) 355-1353
> Email: Justin@...
>
>
>
>
>
> We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time you try it, go
to www.egroups.com, login and be sure to save your password, choose My
Groups, choose Vantage, then choose Files. If you save the password, the
link above will work the next time you try it.)

Justin -

We use Report Builder.

We reviewed the requirements of all the customers demanding bar
coded labels. Then generated our own label which was comprised
of all the client's needs.

HTH,
Calvin

----- Original Message -----
From: Justin Sorenson <Justin@...>
To: <vantage@egroups.com>
Sent: Wednesday, December 06, 2000 8:13 AM
Subject: [Vantage] Shipping Labels

> We are wondering about what everyone uses for software for shipping
labels.
> Is there software out there that can be used with Vantage, or is there
some
> other third party software that can do this? Each of our customers would
> like a different format of barcode. Certain things on one line, length of
> the bar code etc. Any feedback on this will be greatly appreciated
>
> Justin Sorenson
> Network Administrator
> Wire Maid Manufacturing Ltd.
> PO Box 169
> 2714 Ross Avenue
> Schofield, W 54476
>
> Phone: (715) 359-0545
> Fax: (715) 355-1353
> Email: Justin@...
>
>
>
>
>
> We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time you try it, go
to www.egroups.com, login and be sure to save your password, choose My
Groups, choose Vantage, then choose Files. If you save the password, the
link above will work the next time you try it.)

Joe Konecny wrote:

"You can do this with the Crystal Reports shipping label in
Vantage. Set up certain fields to print based on the
customer ID or any other field. It'll take some effort
to set up but will work pretty good."

We do this exact thing at Camcraft - works very well. We make liberal use of
"if" statements to give us conditional printing for different customers.

Jim O'Donnell
Camcraft

-----Original Message-----

Justin Sorenson wrote:

>
> We are wondering about what everyone uses for software for shipping

labels.

> Is there software out there that can be used with Vantage, or is there

some

> other third party software that can do this? Each of our customers would
> like a different format of barcode. Certain things on one line, length of
> the bar code etc. Any feedback on this will be greatly appreciated
>
> Justin Sorenson
> Network Administrator
> Wire Maid Manufacturing Ltd.
> PO Box 169
> 2714 Ross Avenue
> Schofield, W 54476
>
> Phone: (715) 359-0545
> Fax: (715) 355-1353
> Email: Justin@...
>
>
> We no longer allow attachments to files. To access/share Report Files,

please go to the following link: http://www.egroups.com/files/vantage/

> (Note: If this link does not work for you the first time you try it, go

to www.egroups.com, login and be sure to save your password, choose My
Groups, choose Vantage, then choose Files. If you save the password, the
link above will work the next time you try it.)

We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)

How are people creating bar coded shipping labels? We would like to print
bar coded labels with part#, po# and quantity to put on poly bags which
would contain the parts and then pack the bags in a box. Trying to eliminate
the keying in by warehouse personnel but still be able to make quick changes
for quantity. Usually a 1,000 to a roll but this time we have 1,100 or
shipping 2,500 with two rolls of 1,000 and one roll of 500. Any ideas?
Perhaps a VB form or a subreport? Any input would be beneficial. We do have
Label Matrix and Bar Tender printing software in house already. We are
running Vantage/eManufacturing 3.00.632 Progress 8.3. Thanks in advance for
the help.

Jim Frice
Assistant Controller
William Frick & Company
730 Forest Edge Drive
Vernon Hills, IL 60061
PH: 847-634-6341 EXT. 151
FAX: 847-634-2233
E-Mail: Jim.Frice@...

[Non-text portions of this message have been removed]

Jim,
We are using a product from a company called Loftware. I've used it
for creating shipping labels that draw data from Vantage via ODBC. I've
also used it to create bar coded key sequences for logging in and out of
Vantage.

Bart Sgroi

-----Original Message-----
From: Jim Frice [mailto:Jim.Frice@...]
Sent: Wednesday, June 27, 2001 10:07 AM
To: Vantage@Yahoogroups. Com
Subject: [Vantage] Shipping Labels

How are people creating bar coded shipping labels? We would like to print
bar coded labels with part#, po# and quantity to put on poly bags which
would contain the parts and then pack the bags in a box. Trying to eliminate
the keying in by warehouse personnel but still be able to make quick changes
for quantity. Usually a 1,000 to a roll but this time we have 1,100 or
shipping 2,500 with two rolls of 1,000 and one roll of 500. Any ideas?
Perhaps a VB form or a subreport? Any input would be beneficial. We do have
Label Matrix and Bar Tender printing software in house already. We are
running Vantage/eManufacturing 3.00.632 Progress 8.3. Thanks in advance for
the help.

Jim Frice
Assistant Controller
William Frick & Company
730 Forest Edge Drive
Vernon Hills, IL 60061
PH: 847-634-6341 EXT. 151
FAX: 847-634-2233
E-Mail: Jim.Frice@...

[Non-text portions of this message have been removed]

To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have already
linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

[Non-text portions of this message have been removed]

Label Matrix, Custom Progress App, Custom Visual Basic App and a Zebra
printer.

1) The shipping dept. executes the Progress program from within Vantage
(added menu item).
2) The progress program list all current open packing slips. Shipping
person selects the packing slip no that he needs labels for and clicks the
print button.
3) All required data is extracted from Vantage and placed on the hard disk
in a text file.
4) The program then launches the Visual Basic program which reads the text
file and creates a DBF file.
5) The Visual Basic program then executes the Label Matrix print routine
using the newly created DBF file and the label format selected from the
Vantage Customer VB form field, and the labels are printed off the zebra
printer.

Michael Podlin

-----Original Message-----
From: Jim Frice [mailto:Jim.Frice@...]
Sent: Wednesday, June 27, 2001 9:07 AM
To: Vantage@Yahoogroups. Com
Subject: [Vantage] Shipping Labels

How are people creating bar coded shipping labels? We would like to print
bar coded labels with part#, po# and quantity to put on poly bags which
would contain the parts and then pack the bags in a box. Trying to eliminate
the keying in by warehouse personnel but still be able to make quick changes
for quantity. Usually a 1,000 to a roll but this time we have 1,100 or
shipping 2,500 with two rolls of 1,000 and one roll of 500. Any ideas?
Perhaps a VB form or a subreport? Any input would be beneficial. We do have
Label Matrix and Bar Tender printing software in house already. We are
running Vantage/eManufacturing 3.00.632 Progress 8.3. Thanks in advance for
the help.

Jim Frice
Assistant Controller
William Frick & Company
730 Forest Edge Drive
Vernon Hills, IL 60061
PH: 847-634-6341 EXT. 151
FAX: 847-634-2233
E-Mail: Jim.Frice@...

[Non-text portions of this message have been removed]

To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have already
linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Sweet stuff, Mike!

-----Original Message-----
From: Podlin, Michael [mailto:michael.podlin@...]
Sent: Wednesday, June 27, 2001 9:45 AM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Shipping Labels

Label Matrix, Custom Progress App, Custom Visual Basic App and a Zebra
printer.

1) The shipping dept. executes the Progress program from within Vantage
(added menu item).
2) The progress program list all current open packing slips. Shipping
person selects the packing slip no that he needs labels for and clicks the
print button.
3) All required data is extracted from Vantage and placed on the hard disk
in a text file.
4) The program then launches the Visual Basic program which reads the text
file and creates a DBF file.
5) The Visual Basic program then executes the Label Matrix print routine
using the newly created DBF file and the label format selected from the
Vantage Customer VB form field, and the labels are printed off the zebra
printer.

Michael Podlin

-----Original Message-----
From: Jim Frice [mailto:Jim.Frice@...]
Sent: Wednesday, June 27, 2001 9:07 AM
To: Vantage@Yahoogroups. Com
Subject: [Vantage] Shipping Labels

How are people creating bar coded shipping labels? We would like to print
bar coded labels with part#, po# and quantity to put on poly bags which
would contain the parts and then pack the bags in a box. Trying to eliminate
the keying in by warehouse personnel but still be able to make quick changes
for quantity. Usually a 1,000 to a roll but this time we have 1,100 or
shipping 2,500 with two rolls of 1,000 and one roll of 500. Any ideas?
Perhaps a VB form or a subreport? Any input would be beneficial. We do have
Label Matrix and Bar Tender printing software in house already. We are
running Vantage/eManufacturing 3.00.632 Progress 8.3. Thanks in advance for
the help.

Jim Frice
Assistant Controller
William Frick & Company
730 Forest Edge Drive
Vernon Hills, IL 60061
PH: 847-634-6341 EXT. 151
FAX: 847-634-2233
E-Mail: Jim.Frice@...

[Non-text portions of this message have been removed]

To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have already
linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please go to:
http://groups.yahoo.com/group/vantage/files/. Note: You must have already
linked your email address to a yahoo id to enable access.

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Jim,

I've created a progress program that runs from an icon that allows
shipping department to enter job and heat number, user presses print,
and a report builder report is called which prints the box label.

Any customer info, part info, order info, etc. from any table in
Vantage that can be related from jobhead can currently be placed on
the report. The program can be modified to allow quantities for each
label or prompt the user for whatever.

This is currently printed on a full sheet with peel-off adhesive back.
Bar code 39 could be used if this is what your situation requires.

I've done the same for a custom shipping pick list and labels for the
receiving warehouse.

Feel free to contact me off list if you would like a screen snapshot.

Lonnie Drew
Southern Tool, Inc.
256-831-2811 ext 243
lonniedrew@...
ldrew@...

--- In vantage@y..., "Jim Frice" <Jim.Frice@f...> wrote:
> How are people creating bar coded shipping labels? We would like to
print
> bar coded labels with part#, po# and quantity to put on poly bags
which
> would contain the parts and then pack the bags in a box. Trying to
eliminate
> the keying in by warehouse personnel but still be able to make
quick changes
> for quantity. Usually a 1,000 to a roll but this time we have 1,100
or
> shipping 2,500 with two rolls of 1,000 and one roll of 500. Any
ideas?
> Perhaps a VB form or a subreport? Any input would be beneficial. We
do have
> Label Matrix and Bar Tender printing software in house already. We
are
> running Vantage/eManufacturing 3.00.632 Progress 8.3. Thanks in
advance for
> the help.
>
> Jim Frice
> Assistant Controller
> William Frick & Company
> 730 Forest Edge Drive
> Vernon Hills, IL 60061
> PH: 847-634-6341 EXT. 151
> FAX: 847-634-2233
> E-Mail: Jim.Frice@f...
>
>
>
> [Non-text portions of this message have been removed]

We use Crystal to print Shipping lables to a Zebra ZM4 printers, I wound up
creating my own crystal format, eventually we'll be printing AIAG barcodes
for packaging I anticipate that it will be done with a compiled Crystal
Report. (Does anyone know if version 5.2 has a multi report selection
feature similar in nature to the Ceasar utility)

Shirley

-----Original Message-----
From: rmrindler [mailto:rrindler@...]
Sent: Thursday, June 13, 2002 11:06 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Shipping Labels

Is anybody using a Crystal Report to print Shipping Labels on a
DataMax label printer? To me, it doesn't look like the form included
w/ Vantage can be customized to print on an actual label printer.
Has anybody found a way to do it?

Thanks!

Ryan M. Rindler
Network Administrator
Norwood Tool Company

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]

Ryan,

We are using Zebra 105Se label printer to print Shipping Labels. If you want
to I can e-mail you the .rpt file
I had to create it from scratch.

Mike Tonoyan / All American Products Co.
miket@...

----- Original Message -----
From: "rmrindler" <rrindler@...>
To: <vantage@yahoogroups.com>
Sent: Thursday, June 13, 2002 8:06 AM
Subject: [Vantage] Shipping Labels

> Is anybody using a Crystal Report to print Shipping Labels on a
> DataMax label printer? To me, it doesn't look like the form included
> w/ Vantage can be customized to print on an actual label printer.
> Has anybody found a way to do it?
>
> Thanks!
>
> Ryan M. Rindler
> Network Administrator
> Norwood Tool Company
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>

Rather than use crystal label templates, try setting up the report to be a
standard report. You can then select your label printer, and paper/label
size just as you would if you were printing to any other printer. The
report design area will resize to match the label size.

Thaddeus Jacobs
Information Solutions Developer
Kinematic Automation, Inc.
mailto:tjacobs@...

-----Original Message-----
From: Mike Tonoyan [mailto:miket@...]
Sent: Thursday, June 13, 2002 8:41 AM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Shipping Labels

Ryan,

We are using Zebra 105Se label printer to print Shipping Labels. If you want
to I can e-mail you the .rpt file
I had to create it from scratch.

Mike Tonoyan / All American Products Co.
miket@...

----- Original Message -----
From: "rmrindler" <rrindler@...>
To: <vantage@yahoogroups.com>
Sent: Thursday, June 13, 2002 8:06 AM
Subject: [Vantage] Shipping Labels

> Is anybody using a Crystal Report to print Shipping Labels on a
> DataMax label printer? To me, it doesn't look like the form included
> w/ Vantage can be customized to print on an actual label printer.
> Has anybody found a way to do it?
>
> Thanks!
>
> Ryan M. Rindler
> Network Administrator
> Norwood Tool Company
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Thanks for the suggestion, Thad. I will give that a try also.

Ryan

> Rather than use crystal label templates, try setting up the report

to be a

> standard report. You can then select your label printer, and

paper/label

> size just as you would if you were printing to any other printer.

The

> report design area will resize to match the label size.
>
> Thaddeus Jacobs
> Information Solutions Developer
> Kinematic Automation, Inc.
> mailto:tjacobs@k...
>
>
> -----Original Message-----
> From: Mike Tonoyan [mailto:miket@a...]
> Sent: Thursday, June 13, 2002 8:41 AM
> To: vantage@y...
> Subject: Re: [Vantage] Shipping Labels
>
>
> Ryan,
>
> We are using Zebra 105Se label printer to print Shipping Labels. If

you want

> to I can e-mail you the .rpt file
> I had to create it from scratch.
>
> Mike Tonoyan / All American Products Co.
> miket@a...
>
>
> ----- Original Message -----
> From: "rmrindler" <rrindler@n...>
> To: <vantage@y...>
> Sent: Thursday, June 13, 2002 8:06 AM
> Subject: [Vantage] Shipping Labels
>
>
> > Is anybody using a Crystal Report to print Shipping Labels on a
> > DataMax label printer? To me, it doesn't look like the form

included

> > w/ Vantage can be customized to print on an actual label printer.
> > Has anybody found a way to do it?
> >
> > Thanks!
> >
> > Ryan M. Rindler
> > Network Administrator
> > Norwood Tool Company
> >
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You

must

> have already linked your email address to a yahoo id to enable

access. )

> > (1) To access the Files Section of our Yahoo!Group for Report

Builder and

> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> >
> > Your use of Yahoo! Groups is subject to

http://docs.yahoo.com/info/terms/

> >
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You

must have

> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report

Builder and

> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
>
> Your use of Yahoo! Groups is subject to

http://docs.yahoo.com/info/terms/

We are doing this (unfortunately) with RB reports. It was extremely easy to setup to print to a Zebra label printer as if it is a laser printer. No special coding required. Bar codes are Code 39 and the few requests for Code 128 have been successfuly granted a waiver on that. Most scanners can scan almost any code.

The various label formats are all on a report sub-menu in the Shipping menu branch. Some are driven by SO #, Line and Rel but a few are based on Packling Slip. Main problem with PS is we often box stuff up long before the PS has been generated. A couple customers require a special label on the PS in addition to box labels. As long as we were doing the labeling we now label everything and if there is not a custom label we have a generic version.

The label reports take advantage of passing parameters such as box count from the filters. Most parts have a std qty per carton on the part master but if the filter value is <> 0 it overrides the standard (in case a partial box fills out the release).

Someday I will have to convert this all to Crystal but until then it works great. New requests are often similar to an existing flavor so I can clone it off and make a new one pretty quickly.

-Todd C.

-----Original Message-----
From: Paul Lipham [mailto:pml@...]
Sent: Wednesday, June 02, 2004 11:15 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Shipping Labels

I was wondering how other companies are using Vantage to produce "custom"
shipping labels for customers. We have more and more customers that want
their shipments bar coded with all kinds of information. Most of the
customers that have asked for this have a low volume of shipments and we
just made a form in Excel that the shipping guy had to re-key information
into then print the label. Currently I have someone we ship to three to
four times a week asking for a complicated bar code label. I'd like to pull
the information from Vantage and have the labels print when the shipment is
packaged. Does anyone have any ideas? My programmer says he can modify the
program and add a crystal report to the end of the print routine to spit out
the label, but I hate making program changes.

Thanks
Paul Lipham
ASPI

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Yahoo! Groups Sponsor

ADVERTISEMENT
<http://rd.yahoo.com/SIG=129o3vcs6/M=295196.4901138.6071305.3001176/D=groups/S=1705007183:HM/EXP=1086279313/A=2128215/R=0/SIG=10se96mf6/*http://companion.yahoo.com> click here
<http://us.adserver.yahoo.com/l?M=295196.4901138.6071305.3001176/D=groups/S=:HM/A=2128215/rand=391937085>

_____

Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .

[Non-text portions of this message have been removed]

One thing you need to specify the actual printer in print set up. Printers
have a library of sheet sizes they can use. If the specific printer name
its going to print on is not specified crystal will default to the default
printer of the computer that Crystal is running on. Also are there any sub
reports as part of the label. I completely ditched the stock label for my
own.

Shirley

_____

From: Charles Paluska - HPN [mailto:cpaluska@...]
Sent: Thursday, March 24, 2005 10:46 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Shipping Labels

Hello All,

Has anyone run into the following issue with printing shipping labels on a
Zebra label printer:

Blank extra label always printed after each populated label?

We are running 6.1 and using a Zebra 105S label printer with 4x6.5 inch
labels. Problem started immediately after our upgrade to 6.1 from 5.0.

Pulling up the rpt in Crystal seems to show that the report was created and
layed out for a 8.5x11 page. But everytime I change the printer
configuration to the Zebra or play with the orientation no data will
preview.

Looking forward to your suggestions.

Charles

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Yahoo! Groups Sponsor

ADVERTISEMENT

<http://us.ard.yahoo.com/SIG=129aasnmi/M=298184.6191685.7192823.3001176/D=gr
oups/S=1705007183:HM/EXP=1111765582/A=2593423/R=0/SIG=11el9gslf/*http:/www.n
etflix.com/Default?mqso=60190075> click here

<http://us.adserver.yahoo.com/l?M=298184.6191685.7192823.3001176/D=groups/S=
:HM/A=2593423/rand=291925011>

_____

Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

Tracking #: 5ABDECDD741B47498E9359220FCABC9A20B7E4B0

[Non-text portions of this message have been removed]

Hi Charles,

Zebra printers and their drivers are fussy.
Check under printers, the zebra printer in question under print
preferences.
I believe there is a default setting that must match the label size.
Also make sure the application is using the right label size.

Hope this helps,

John Mansfield
General Sheet Metal

-----Original Message-----
From: Charles Paluska - HPN [mailto:cpaluska@...]
Sent: Thursday, March 24, 2005 10:46 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Shipping Labels

Hello All,

Has anyone run into the following issue with printing shipping labels on
a Zebra label printer:

Blank extra label always printed after each populated label?

We are running 6.1 and using a Zebra 105S label printer with 4x6.5 inch
labels. Problem started immediately after our upgrade to 6.1 from 5.0.

Pulling up the rpt in Crystal seems to show that the report was created
and layed out for a 8.5x11 page. But everytime I change the printer
configuration to the Zebra or play with the orientation no data will
preview.

Looking forward to your suggestions.

Charles

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links

Thanks for the words of wisdom everyone.

Found that I needed to rebuild the label from scratch with the printer
preset to the Zebra - the original from Epicor was laid out for 8.5x11 and
for some reason, just openning the report and changing the printer setup and
saving it didn't do the trick.

Thanks again,

Charles

----- Original Message -----
From: "John Mansfield" <johnm@...>
To: <vantage@yahoogroups.com>
Sent: Thursday, March 24, 2005 11:30 AM
Subject: RE: [Vantage] Shipping Labels

>
> Hi Charles,
>
> Zebra printers and their drivers are fussy.
> Check under printers, the zebra printer in question under print
> preferences.
> I believe there is a default setting that must match the label size.
> Also make sure the application is using the right label size.
>
> Hope this helps,
>
> John Mansfield
> General Sheet Metal
>
>
> -----Original Message-----
> From: Charles Paluska - HPN [mailto:cpaluska@...]
> Sent: Thursday, March 24, 2005 10:46 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Shipping Labels
>
>
> Hello All,
>
> Has anyone run into the following issue with printing shipping labels on
> a Zebra label printer:
>
> Blank extra label always printed after each populated label?
>
> We are running 6.1 and using a Zebra 105S label printer with 4x6.5 inch
> labels. Problem started immediately after our upgrade to 6.1 from 5.0.
>
> Pulling up the rpt in Crystal seems to show that the report was created
> and layed out for a 8.5x11 page. But everytime I change the printer
> configuration to the Zebra or play with the orientation no data will
> preview.
>
> Looking forward to your suggestions.
>
> Charles
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder
> and Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>

We use the regular Report Builder number of copies field that pops up when they get the prompts for change filters or print preview. At first we had trouble with our Zebra Z4M printer not obeying this only for RB (while in Excel, Word etc... it did copies OK) so we ended up, after finding the right Zebra support tech., lying about the rev level for the printer in the printer setup. There was some sort of flukey quirk in the driver that wanted to see some other rev level for the printer before it would obey all copies commands.

Are you using a Z4M? I can send the rev level that made it start working.

As for in the filter I am not sure if that is possible with RB, or even Crystal. I pass data via the filters all the time but I am unaware of functions or comands that work on the actual printing at runtime. It is no more "input" to do copies in the filter/preview window than in the actual filters area.

-Todd C.

-----Original Message-----
From: Nancy Schultz [mailto:nschultz@...]
Sent: Friday, July 29, 2005 2:23 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Shipping Labels

Todd C.

If you are out there today...I was wondering how you get your Shipping
Label
to print more than one copy?
I can only get it to print one label. I know that I can write a copies
string,
but I want the shipping department to put a number in somewhere and then
that
many labels would print out. I am not sure how to do this or where to
put the
info so that they have minimal input. Is there a way to put something in
the
filter?
Thanks for any help you can give me.

Nancy Schultz
GTR MFG Corp.

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

_____

YAHOO! GROUPS LINKS

* Visit your group " vantage <http://groups.yahoo.com/group/vantage> " on the web.

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .

_____

[Non-text portions of this message have been removed]

Todd C.
Thanks for responding. I am trying to print the label to a laser printer
right now to see if shipping can work with the labels. We are going to
purchase a Zebra Printer next month (August). I have looked at the one
you are talking about and it looks good. I would really appreciate the
rev level when we get the printer. I am going to try what you said.
Thanks again for all your help.
Nancy S.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Todd Caughey
Sent: Friday, July 29, 2005 3:53 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Shipping Labels

We use the regular Report Builder number of copies field that pops up when they get the prompts for change filters or print preview. At first we had trouble with our Zebra Z4M printer not obeying this only for RB (while in Excel, Word etc... it did copies OK) so we ended up, after finding the right Zebra support tech., lying about the rev level for the printer in the printer setup. There was some sort of flukey quirk in the driver that wanted to see some other rev level for the printer before it would obey all copies commands.

Are you using a Z4M? I can send the rev level that made it start working.

As for in the filter I am not sure if that is possible with RB, or even Crystal. I pass data via the filters all the time but I am unaware of functions or comands that work on the actual printing at runtime. It is no more "input" to do copies in the filter/preview window than in the actual filters area.

-Todd C.

-----Original Message-----
From: Nancy Schultz [mailto:nschultz@...]
Sent: Friday, July 29, 2005 2:23 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Shipping Labels

Todd C.

If you are out there today...I was wondering how you get your Shipping Label to print more than one copy?
I can only get it to print one label. I know that I can write a copies string, but I want the shipping department to put a number in somewhere and then that many labels would print out. I am not sure how to do this or where to put the info so that they have minimal input. Is there a way to put something in the filter?
Thanks for any help you can give me.

Nancy Schultz
GTR MFG Corp.

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

_____

YAHOO! GROUPS LINKS

* Visit your group " vantage <http://groups.yahoo.com/group/vantage> " on the web.

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .

_____

[Non-text portions of this message have been removed]

------------------------ Yahoo! Groups Sponsor --------------------~--> <font face=arial size=-1><a href="http://us.ard.yahoo.com/SIG=12hka4eg4/M=362131.6882499.7825260.1510227/D=groups/S=1705007183:TM/Y=YAHOO/EXP=1122674047/A=2889191/R=0/SIG=10r90krvo/*http://www.thebeehive.org
">Get Bzzzy! (real tools to help you find a job) Welcome to the Sweet Life -Â brought to you by One Economy</a>.</font> --------------------------------------------------------------------~->

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links

You would have to write a programmatic wrapper in any of the languages which
support the crviewer control (VB, C++, Java, .NET). From there, there are
two ways to proceed. First, you can extract the data in the wrapper code
into a temporary data store, replicate the records to the quantity count and
issue the print command in the Crystal API with the report using the
temporary data as the data source. Second, you could have Crystal extract
the data directly and build the windows printer dialog construct in the
wrapper code and pass the quantity variable to the windows API at runtime.

Michael

Michael Barry
Aspacia Systems Inc
866.566.9600
312.803.0730 fax
http://www.aspacia.com/

This email, and any attachments thereto, is intended only for use by the
addressee(s) named herein and may contain legally privileged and/or
confidential information. If you are not the intended recipient of this
email, you are hereby notified that any dissemination, distribution or
copying of this email, and any attachments thereto, is strictly prohibited.
If you have received this email in error, please immediately notify me by
telephone and permanently delete the original and any copy of any email and
any printout thereof.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
bakerprovan
Sent: Wednesday, February 08, 2006 2:26 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Shipping Labels

Does anyone know how you can make crystal reports 8.5 or Vantage6.1 to
control the amount of shipping labels being printed.

this is my scenario
one part label with Qty: 10

I would like to have with the same report have copies of 10 which displays
Qty: 1.

-->Qty10
Qty1
Qty1
Qty1
Qty1
Qty1
Qty1
Qty1
Qty1
Qty1
Qty1

So if i have an item which was known to have more that 1, the report prints
that many labels plus the total amount. Can anyone suggest steps to take in
Crystal Reports 8.5 or Vantage 6.1 to resolve this issue??

Any help would be gladly appreciated

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links

Michael!
I was asking if you can control the printing using Crystal Reports
8.5 and Vantage 6.1 with Progress9.1D as the database to fix this
issue as we dont have the software to write a program in those
languages you mentioned.

--- In vantage@yahoogroups.com, "Michael Barry" <mbarry@...> wrote:
>
> You would have to write a programmatic wrapper in any of the
languages which
> support the crviewer control (VB, C++, Java, .NET). From there,
there are
> two ways to proceed. First, you can extract the data in the
wrapper code
> into a temporary data store, replicate the records to the quantity
count and
> issue the print command in the Crystal API with the report using
the
> temporary data as the data source. Second, you could have Crystal
extract
> the data directly and build the windows printer dialog construct
in the
> wrapper code and pass the quantity variable to the windows API at
runtime.
>
> Michael
>
> Michael Barry
> Aspacia Systems Inc
> 866.566.9600
> 312.803.0730 fax
> http://www.aspacia.com/
>
> This email, and any attachments thereto, is intended only for use
by the
> addressee(s) named herein and may contain legally privileged and/or
> confidential information. If you are not the intended recipient
of this
> email, you are hereby notified that any dissemination,
distribution or
> copying of this email, and any attachments thereto, is strictly
prohibited.
> If you have received this email in error, please immediately
notify me by
> telephone and permanently delete the original and any copy of any
email and
> any printout thereof.
>
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
Behalf Of
> bakerprovan
> Sent: Wednesday, February 08, 2006 2:26 PM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Shipping Labels
>
> Does anyone know how you can make crystal reports 8.5 or
Vantage6.1 to
> control the amount of shipping labels being printed.
>
> this is my scenario
> one part label with Qty: 10
>
> I would like to have with the same report have copies of 10 which
displays
> Qty: 1.
>
>
> -->Qty10
> Qty1
> Qty1
> Qty1
> Qty1
> Qty1
> Qty1
> Qty1
> Qty1
> Qty1
> Qty1
>
> So if i have an item which was known to have more that 1, the
report prints
> that many labels plus the total amount. Can anyone suggest steps
to take in
> Crystal Reports 8.5 or Vantage 6.1 to resolve this issue??
>
> Any help would be gladly appreciated
>
>
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>

Then the answer is no...you can't.

Michael

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
bakerprovan
Sent: Wednesday, February 08, 2006 2:58 PM
To: vantage@yahoogroups.com
Subject: Spam [Vantage] Re: Shipping Labels

Michael!
I was asking if you can control the printing using Crystal Reports
8.5 and Vantage 6.1 with Progress9.1D as the database to fix this issue as
we dont have the software to write a program in those languages you
mentioned.

--- In vantage@yahoogroups.com, "Michael Barry" <mbarry@...> wrote:
>
> You would have to write a programmatic wrapper in any of the
languages which
> support the crviewer control (VB, C++, Java, .NET). From there,
there are
> two ways to proceed. First, you can extract the data in the
wrapper code
> into a temporary data store, replicate the records to the quantity
count and
> issue the print command in the Crystal API with the report using
the
> temporary data as the data source. Second, you could have Crystal
extract
> the data directly and build the windows printer dialog construct
in the
> wrapper code and pass the quantity variable to the windows API at
runtime.
>
> Michael
>
> Michael Barry
> Aspacia Systems Inc
> 866.566.9600
> 312.803.0730 fax
> http://www.aspacia.com/
>
> This email, and any attachments thereto, is intended only for use
by the
> addressee(s) named herein and may contain legally privileged and/or
> confidential information. If you are not the intended recipient
of this
> email, you are hereby notified that any dissemination,
distribution or
> copying of this email, and any attachments thereto, is strictly
prohibited.
> If you have received this email in error, please immediately
notify me by
> telephone and permanently delete the original and any copy of any
email and
> any printout thereof.
>
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
Behalf Of
> bakerprovan
> Sent: Wednesday, February 08, 2006 2:26 PM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Shipping Labels
>
> Does anyone know how you can make crystal reports 8.5 or
Vantage6.1 to
> control the amount of shipping labels being printed.
>
> this is my scenario
> one part label with Qty: 10
>
> I would like to have with the same report have copies of 10 which
displays
> Qty: 1.
>
>
> -->Qty10
> Qty1
> Qty1
> Qty1
> Qty1
> Qty1
> Qty1
> Qty1
> Qty1
> Qty1
> Qty1
>
> So if i have an item which was known to have more that 1, the
report prints
> that many labels plus the total amount. Can anyone suggest steps
to take in
> Crystal Reports 8.5 or Vantage 6.1 to resolve this issue??
>
> Any help would be gladly appreciated
>
>
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links

Anyways Michael,
Sorry about this but how can you issue the print command in the
Crystal API, so far as I view the report in Vantage6.1 it is able to
generate a temp file that I can view in MS Excel then manipulate fro
there then how do I isse the print command in the Crystal API???

Thank you very much for you kind and considerate assitance

--- In vantage@yahoogroups.com, "Michael Barry" <mbarry@...> wrote:
>
> You would have to write a programmatic wrapper in any of the
languages which
> support the crviewer control (VB, C++, Java, .NET). From there,
there are
> two ways to proceed. First, you can extract the data in the
wrapper code
> into a temporary data store, replicate the records to the quantity
count and
> issue the print command in the Crystal API with the report using
the
> temporary data as the data source. Second, you could have Crystal
extract
> the data directly and build the windows printer dialog construct
in the
> wrapper code and pass the quantity variable to the windows API at
runtime.
>
> Michael
>
> Michael Barry
> Aspacia Systems Inc
> 866.566.9600
> 312.803.0730 fax
> http://www.aspacia.com/
>
> This email, and any attachments thereto, is intended only for use
by the
> addressee(s) named herein and may contain legally privileged and/or
> confidential information. If you are not the intended recipient
of this
> email, you are hereby notified that any dissemination,
distribution or
> copying of this email, and any attachments thereto, is strictly
prohibited.
> If you have received this email in error, please immediately
notify me by
> telephone and permanently delete the original and any copy of any
email and
> any printout thereof.
>
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
Behalf Of
> bakerprovan
> Sent: Wednesday, February 08, 2006 2:26 PM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Shipping Labels
>
> Does anyone know how you can make crystal reports 8.5 or
Vantage6.1 to
> control the amount of shipping labels being printed.
>
> this is my scenario
> one part label with Qty: 10
>
> I would like to have with the same report have copies of 10 which
displays
> Qty: 1.
>
>
> -->Qty10
> Qty1
> Qty1
> Qty1
> Qty1
> Qty1
> Qty1
> Qty1
> Qty1
> Qty1
> Qty1
>
> So if i have an item which was known to have more that 1, the
report prints
> that many labels plus the total amount. Can anyone suggest steps
to take in
> Crystal Reports 8.5 or Vantage 6.1 to resolve this issue??
>
> Any help would be gladly appreciated
>
>
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>

Maybe I am not reading the problem description properly, but we
print mulitple labels for the same packing slip line by altering the
packages quantity in the packing slip line.

This can be done through mass shipments or individual line.

The number of packages equals the number of labels printed.

Doug Oswald
MIS
Fleetwood Fixtures

--- In vantage@yahoogroups.com, "bakerprovan" <bakerprovan@...>
wrote:

>
> Does anyone know how you can make crystal reports 8.5 or Vantage6.1
> to control the amount of shipping labels being printed.
>
> this is my scenario
> one part label with Qty: 10
>
> I would like to have with the same report have copies of 10 which
> displays Qty: 1.
>
>
> -->Qty10
> Qty1
> Qty1
> Qty1
> Qty1
> Qty1
> Qty1
> Qty1
> Qty1
> Qty1
> Qty1
>
> So if i have an item which was known to have more that 1, the

report

> prints that many labels plus the total amount. Can anyone suggest
> steps to take in Crystal Reports 8.5 or Vantage 6.1 to resolve this
> issue??
>
> Any help would be gladly appreciated
>

We are printing to a Zebra 105SL. I have heavily modifed...make that
wrote from scratch a report that contains multiple subreports so that
each customer will have their own required bar code labels printed. Now
that I've got the report dialed in it works great!

Mike Lowe
Connor Manufacturing Services

________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Brian Larcom
Sent: Friday, September 29, 2006 6:56 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Shipping Labels

Are companies using the Vantage Shipping Labels option at time of
shipment? If so, what label printer are you using? Have you modified
the print out and if so, what changes have you incorporated onto the
label?
Thanks,
Brian Larcom, CFO
Metallized Carbon Corporation
Ossining, NY

[Non-text portions of this message have been removed]

Mike,
I see the Zera 105SL can be purchased as a wireless. Are you using a
wireless connection or hardwired connection?
Thanks,
Brian

--- In vantage@yahoogroups.com, "Mike Lowe" <MLowe@...> wrote:
>
> We are printing to a Zebra 105SL. I have heavily modifed...make
that
> wrote from scratch a report that contains multiple subreports so
that
> each customer will have their own required bar code labels
printed. Now
> that I've got the report dialed in it works great!
>
> Mike Lowe
> Connor Manufacturing Services
>
> ________________________________
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
Behalf
> Of Brian Larcom
> Sent: Friday, September 29, 2006 6:56 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Shipping Labels
>
>
>
> Are companies using the Vantage Shipping Labels option at time of
> shipment? If so, what label printer are you using? Have you
modified
> the print out and if so, what changes have you incorporated onto
the
> label?
> Thanks,
> Brian Larcom, CFO
> Metallized Carbon Corporation
> Ossining, NY
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

We have it hardwired.

________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Brian Larcom
Sent: Friday, September 29, 2006 12:33 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: Shipping Labels

Mike,
I see the Zera 105SL can be purchased as a wireless. Are you using a
wireless connection or hardwired connection?
Thanks,
Brian

--- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ,
"Mike Lowe" <MLowe@...> wrote:

>
> We are printing to a Zebra 105SL. I have heavily modifed...make

that

> wrote from scratch a report that contains multiple subreports so

that

> each customer will have their own required bar code labels

printed. Now

> that I've got the report dialed in it works great!
>
> Mike Lowe
> Connor Manufacturing Services
>
> ________________________________
>
> From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>

[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf

> Of Brian Larcom
> Sent: Friday, September 29, 2006 6:56 AM
> To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> Subject: [Vantage] Shipping Labels
>
>
>
> Are companies using the Vantage Shipping Labels option at time of
> shipment? If so, what label printer are you using? Have you

modified

> the print out and if so, what changes have you incorporated onto

the

> label?
> Thanks,
> Brian Larcom, CFO
> Metallized Carbon Corporation
> Ossining, NY
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

[Non-text portions of this message have been removed]