Syntax for BPM to enable EnableMfgSerialBtn

system · July 11, 2013, 8:36pm

FYI -

I just added the line

EnableMfgSerialBtn = True.

My BPM is working now.

I didn't know I could enable a button this way.

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Cathy
Sent: Thursday, July 11, 2013 2:29 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] syntax for BPM to enable EnableMfgSerialBtn

CustShip.GetOrderRelInfo

-----Original Message-----
From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf Of
Jose Gomez
Sent: Thursday, July 11, 2013 10:51 AM
To: Vantage
Subject: Re: [Vantage] syntax for BPM to enable EnableMfgSerialBtn

So it looks like it happens then, so you need to call GetPartInfo from the
BPM.
What method does your BPM run on?

*Jose C Gomez*
*Software Engineer*
*
*
*
*T: 904.469.1524 mobile
E: jose@... <mailto:jose%40josecgomez.com>
http://www.josecgomez.com
<http://www.linkedin.com/in/josecgomez> <http://www.facebook.com/josegomez>
<http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
<http://www.josecgomez.com/professional-resume/>
<http://www.josecgomez.com/feed/>
<http://www.usdoingstuff.com>

*Quis custodiet ipsos custodes?*

On Thu, Jul 11, 2013 at 1:44 PM, Cathy <cathy@...
<mailto:cathy%40embeddedarm.com> > wrote:

> **
>
>
> Hi Jose,
>
> I started the trace and in Customer Shipments, I changed the Part
> Number on the line. The serial number button is enabled.
>
> I believe the BO is
> <businessObject>Epicor.Mfg.BO.CustShip</businessObject>,
> <methodName>GetPartInfo</methodName>.
>
> However, I don't see where the button becomes enable in the trace.
>
> I do see this in the code -
>
> EnableInvSerialBtn>false</EnableInvSerialBtn>
> <EnableMfgSerialBtn>false</EnableMfgSerialBtn>
> <EnablePOSerialBtn>false</EnablePOSerialBtn>
>
>
> Any help would be appreciated.
>
> -----Original Message-----
> From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>

[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On

> Behalf Of Jose Gomez
> Sent: Wednesday, July 10, 2013 5:44 PM
> To: Vantage
> Subject: Re: [Vantage] syntax for BPM to enable EnableMfgSerialBtn
>
> Do it manually and run a trace. Then you need to replicate the same BO
> calls in BPM. Once you have the trace done and you know what BO's you
> need to call hit me back and I'll help you muddle through the code.
>
> *Jose C Gomez*
> *Software Engineer*
> *
> *
> *
> *T: 904.469.1524 mobile
> E: jose@... <mailto:jose%40josecgomez.com>
> http://www.josecgomez.com
> <http://www.linkedin.com/in/josecgomez>
> <http://www.facebook.com/josegomez
> >
> <http://www.google.com/profiles/jose.gomez>
> <http://www.twitter.com/joc85>
> <http://www.josecgomez.com/professional-resume/>
> <http://www.josecgomez.com/feed/>
> <http://www.usdoingstuff.com>
>
> *Quis custodiet ipsos custodes?*
>
>
> On Wed, Jul 10, 2013 at 8:32 PM, cathyattechnologicsys <
> cathy@... <mailto:cathy%40embeddedarm.com> > wrote:
>
> > **
>
> >
> >
> > I am writing a BPM to change the Part Number and Description in
> > Customer Shipments to the Job Part Number for RMA's.
> >
> > I can change the part number and description but, if it serial
> > tracked, it does not enable the Serial number button.
> >
> > Can I enable this in a BPM?
> >
> > Any help would be appreciated.
> >
> > Thank you,
> >
> >
> >
>
> [Non-text portions of this message have been removed]
>
> ------------------------------------
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access.
> )
> (1) To access the Files Section of our Yahoo!Group for Report Builder
> and Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.

<http://groups.yahoo.com/group/vantage/files/>

> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>
>
>

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

[Non-text portions of this message have been removed]

system · July 10, 2013, 8:32pm

I am writing a BPM to change the Part Number and Description in Customer Shipments to the Job Part Number for RMA's.

I can change the part number and description but, if it serial tracked, it does not enable the Serial number button.

Can I enable this in a BPM?

Any help would be appreciated.

Thank you,

system · July 10, 2013, 8:44pm

Do it manually and run a trace. Then you need to replicate the same BO
calls in BPM. Once you have the trace done and you know what BO's you need
to call hit me back and I'll help you muddle through the code.

*Jose C Gomez*
*Software Engineer*
*
*
*
*T: 904.469.1524 mobile
E: jose@...
http://www.josecgomez.com
<http://www.linkedin.com/in/josecgomez> <http://www.facebook.com/josegomez>
<http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
<http://www.josecgomez.com/professional-resume/>
<http://www.josecgomez.com/feed/>
<http://www.usdoingstuff.com>

*Quis custodiet ipsos custodes?*

On Wed, Jul 10, 2013 at 8:32 PM, cathyattechnologicsys <
cathy@...> wrote:

> **
>
>
> I am writing a BPM to change the Part Number and Description in Customer
> Shipments to the Job Part Number for RMA's.
>
> I can change the part number and description but, if it serial tracked, it
> does not enable the Serial number button.
>
> Can I enable this in a BPM?
>
> Any help would be appreciated.
>
> Thank you,
>
>
>

[Non-text portions of this message have been removed]

system · July 11, 2013, 1:44pm

Hi Jose,

I started the trace and in Customer Shipments, I changed the Part Number on
the line. The serial number button is enabled.

I believe the BO is
<businessObject>Epicor.Mfg.BO.CustShip</businessObject>,
<methodName>GetPartInfo</methodName>.

However, I don't see where the button becomes enable in the trace.

I do see this in the code -

EnableInvSerialBtn>false</EnableInvSerialBtn>
<EnableMfgSerialBtn>false</EnableMfgSerialBtn>
<EnablePOSerialBtn>false</EnablePOSerialBtn>

Any help would be appreciated.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Jose Gomez
Sent: Wednesday, July 10, 2013 5:44 PM
To: Vantage
Subject: Re: [Vantage] syntax for BPM to enable EnableMfgSerialBtn

Do it manually and run a trace. Then you need to replicate the same BO calls
in BPM. Once you have the trace done and you know what BO's you need to call
hit me back and I'll help you muddle through the code.

*Jose C Gomez*
*Software Engineer*
*
*
*
*T: 904.469.1524 mobile
E: jose@...
http://www.josecgomez.com
<http://www.linkedin.com/in/josecgomez> <http://www.facebook.com/josegomez>
<http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
<http://www.josecgomez.com/professional-resume/>
<http://www.josecgomez.com/feed/>
<http://www.usdoingstuff.com>

*Quis custodiet ipsos custodes?*

On Wed, Jul 10, 2013 at 8:32 PM, cathyattechnologicsys <
cathy@...> wrote:

> **
>
>
> I am writing a BPM to change the Part Number and Description in
> Customer Shipments to the Job Part Number for RMA's.
>
> I can change the part number and description but, if it serial
> tracked, it does not enable the Serial number button.
>
> Can I enable this in a BPM?
>
> Any help would be appreciated.
>
> Thank you,
>
>
>

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

system · July 11, 2013, 1:51pm

So it looks like it happens then, so you need to call GetPartInfo from the
BPM.
What method does your BPM run on?

*Jose C Gomez*
*Software Engineer*
*
*
*
*T: 904.469.1524 mobile
E: jose@...
http://www.josecgomez.com
<http://www.linkedin.com/in/josecgomez> <http://www.facebook.com/josegomez>
<http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
<http://www.josecgomez.com/professional-resume/>
<http://www.josecgomez.com/feed/>
<http://www.usdoingstuff.com>

*Quis custodiet ipsos custodes?*

On Thu, Jul 11, 2013 at 1:44 PM, Cathy <cathy@...> wrote:

> **
>
>
> Hi Jose,
>
> I started the trace and in Customer Shipments, I changed the Part Number on
> the line. The serial number button is enabled.
>
> I believe the BO is
> <businessObject>Epicor.Mfg.BO.CustShip</businessObject>,
> <methodName>GetPartInfo</methodName>.
>
> However, I don't see where the button becomes enable in the trace.
>
> I do see this in the code -
>
> EnableInvSerialBtn>false</EnableInvSerialBtn>
> <EnableMfgSerialBtn>false</EnableMfgSerialBtn>
> <EnablePOSerialBtn>false</EnablePOSerialBtn>
>
>
> Any help would be appreciated.
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
> Of
> Jose Gomez
> Sent: Wednesday, July 10, 2013 5:44 PM
> To: Vantage
> Subject: Re: [Vantage] syntax for BPM to enable EnableMfgSerialBtn
>
> Do it manually and run a trace. Then you need to replicate the same BO
> calls
> in BPM. Once you have the trace done and you know what BO's you need to
> call
> hit me back and I'll help you muddle through the code.
>
> *Jose C Gomez*
> *Software Engineer*
> *
> *
> *
> *T: 904.469.1524 mobile
> E: jose@...
> http://www.josecgomez.com
> <http://www.linkedin.com/in/josecgomez> <http://www.facebook.com/josegomez
> >
> <http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
> <http://www.josecgomez.com/professional-resume/>
> <http://www.josecgomez.com/feed/>
> <http://www.usdoingstuff.com>
>
> *Quis custodiet ipsos custodes?*
>
>
> On Wed, Jul 10, 2013 at 8:32 PM, cathyattechnologicsys <
> cathy@...> wrote:
>
> > **
>
> >
> >
> > I am writing a BPM to change the Part Number and Description in
> > Customer Shipments to the Job Part Number for RMA's.
> >
> > I can change the part number and description but, if it serial
> > tracked, it does not enable the Serial number button.
> >
> > Can I enable this in a BPM?
> >
> > Any help would be appreciated.
> >
> > Thank you,
> >
> >
> >
>
> [Non-text portions of this message have been removed]
>
> ------------------------------------
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>
>
>

[Non-text portions of this message have been removed]

system · July 11, 2013, 5:29pm

CustShip.GetOrderRelInfo

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Jose Gomez
Sent: Thursday, July 11, 2013 10:51 AM
To: Vantage
Subject: Re: [Vantage] syntax for BPM to enable EnableMfgSerialBtn

So it looks like it happens then, so you need to call GetPartInfo from the
BPM.
What method does your BPM run on?

*Jose C Gomez*
*Software Engineer*
*
*
*
*T: 904.469.1524 mobile
E: jose@...
http://www.josecgomez.com
<http://www.linkedin.com/in/josecgomez> <http://www.facebook.com/josegomez>
<http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
<http://www.josecgomez.com/professional-resume/>
<http://www.josecgomez.com/feed/>
<http://www.usdoingstuff.com>

*Quis custodiet ipsos custodes?*

On Thu, Jul 11, 2013 at 1:44 PM, Cathy <cathy@...> wrote:

> **
>
>
> Hi Jose,
>
> I started the trace and in Customer Shipments, I changed the Part
> Number on the line. The serial number button is enabled.
>
> I believe the BO is
> <businessObject>Epicor.Mfg.BO.CustShip</businessObject>,
> <methodName>GetPartInfo</methodName>.
>
> However, I don't see where the button becomes enable in the trace.
>
> I do see this in the code -
>
> EnableInvSerialBtn>false</EnableInvSerialBtn>
> <EnableMfgSerialBtn>false</EnableMfgSerialBtn>
> <EnablePOSerialBtn>false</EnablePOSerialBtn>
>
>
> Any help would be appreciated.
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
> Behalf Of Jose Gomez
> Sent: Wednesday, July 10, 2013 5:44 PM
> To: Vantage
> Subject: Re: [Vantage] syntax for BPM to enable EnableMfgSerialBtn
>
> Do it manually and run a trace. Then you need to replicate the same BO
> calls in BPM. Once you have the trace done and you know what BO's you
> need to call hit me back and I'll help you muddle through the code.
>
> *Jose C Gomez*
> *Software Engineer*
> *
> *
> *
> *T: 904.469.1524 mobile
> E: jose@...
> http://www.josecgomez.com
> <http://www.linkedin.com/in/josecgomez>
> <http://www.facebook.com/josegomez
> >
> <http://www.google.com/profiles/jose.gomez>
> <http://www.twitter.com/joc85>
> <http://www.josecgomez.com/professional-resume/>
> <http://www.josecgomez.com/feed/>
> <http://www.usdoingstuff.com>
>
> *Quis custodiet ipsos custodes?*
>
>
> On Wed, Jul 10, 2013 at 8:32 PM, cathyattechnologicsys <
> cathy@...> wrote:
>
> > **
>
> >
> >
> > I am writing a BPM to change the Part Number and Description in
> > Customer Shipments to the Job Part Number for RMA's.
> >
> > I can change the part number and description but, if it serial
> > tracked, it does not enable the Serial number button.
> >
> > Can I enable this in a BPM?
> >
> > Any help would be appreciated.
> >
> > Thank you,
> >
> >
> >
>
> [Non-text portions of this message have been removed]
>
> ------------------------------------
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access.
> )
> (1) To access the Files Section of our Yahoo!Group for Report Builder
> and Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>
>
>

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links