Touch Screen Monitors with MES

Yahoo Archive
1
We use a selection of 3M monitors

They seem very good. No issues after 18 months. They get banged about a lot!!!

--- In vantage@yahoogroups.com, "bschafbu" <bschafbuch@...> wrote:
>
> Hello -
>
> Wondering if anyone has any suggestions for a particular touch screen make and/or model. We're looking to purchase a monitor to simulate it's use in on our floor with MES.
>
> Thanks-
>
> Bob Schafbuch
> Integrated DNA Technologies
>
2
Hello -

Wondering if anyone has any suggestions for a particular touch screen make and/or model. We're looking to purchase a monitor to simulate it's use in on our floor with MES.

Thanks-

Bob Schafbuch
Integrated DNA Technologies
3
Bob,

I've installed many of these:

Pioneer POS Stealth
http://www.pioneerpos.com/stealth-m5.php


They work very well.

Epicor sells them but after digging around I've found this company to offer the best price. Be sure to order screen protectors, too.

Daniel J. Young
DXY Solutions, LLC
o: 216.373.6630 x10
m: 216.375.7974
e: danyoung@...
w: http://www.dxysolutions.com


These are all-in-one PC's and are very durable. They have USB connections, Wi-Fi, etc. Great boxes. I usually outfit each of these on the shop floor with a USB Symbol LS2208 barcode scanner.

Best regards,


Vic Drecchio
ERP Administrator
TIMCO Aviation Services
Greensboro, NC
Email:Â Â vic.drecchio@...
Mobile:Â 704.530.3092


-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of bschafbu
Sent: Saturday, August 29, 2009 3:27 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Touch Screen Monitors with MES

Hello -

Wondering if anyone has any suggestions for a particular touch screen make and/or model. We're looking to purchase a monitor to simulate it's use in on our floor with MES.

Thanks-

Bob Schafbuch
Integrated DNA Technologies



------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
4
I can confirm Vic's recommendation, the Pioneer systems work very well. The all in one system is nice and neat too.


--- In vantage@yahoogroups.com, "Vic Drecchio" <vic.drecchio@...> wrote:
>
> Bob,
>
> I've installed many of these:
>
> Pioneer POS Stealth
> http://www.pioneerpos.com/stealth-m5.php
>
>
> They work very well.
>
> Epicor sells them but after digging around I've found this company to offer the best price. Be sure to order screen protectors, too.
>
> Daniel J. Young
> DXY Solutions, LLC
> o: 216.373.6630 x10
> m: 216.375.7974
> e: danyoung@...
> w: http://www.dxysolutions.com
>
>
> These are all-in-one PC's and are very durable. They have USB connections, Wi-Fi, etc. Great boxes. I usually outfit each of these on the shop floor with a USB Symbol LS2208 barcode scanner.
>
> Best regards,
>
>
> Vic Drecchio
> ERP Administrator
> TIMCO Aviation Services
> Greensboro, NC
> Email:Â Â vic.drecchio@...
> Mobile:Â 704.530.3092
>
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of bschafbu
> Sent: Saturday, August 29, 2009 3:27 PM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Touch Screen Monitors with MES
>
> Hello -
>
> Wondering if anyone has any suggestions for a particular touch screen make and/or model. We're looking to purchase a monitor to simulate it's use in on our floor with MES.
>
> Thanks-
>
> Bob Schafbuch
> Integrated DNA Technologies
>
>
>
> ------------------------------------
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>
5
We use pioneers, im not sure if that's the best choice, if I had to do
it all over again I might go with a windows terminal setup for cost
control, we have not had any issues to date with performance or
reliability of the pioneers.



Rob Bucek

Manufacturing Engineer

PH: (715) 284-5376 ext 3111

FAX: (715)284-4084

<http://www.dsmfg.com/>

(Click the logo to view our site) <http://www.dsmfg.com/>





From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of bschafbu
Sent: Saturday, August 29, 2009 2:27 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Touch Screen Monitors with MES





Hello -

Wondering if anyone has any suggestions for a particular touch screen
make and/or model. We're looking to purchase a monitor to simulate it's
use in on our floor with MES.

Thanks-

Bob Schafbuch
Integrated DNA Technologies





[Non-text portions of this message have been removed]
6
We used the Epicor recommended touch screens but after implementing 5
of them we found everyone was just as happy with a keyboard &
mouse. The keyboard-on-screen was just too user-unfriendly. The
last 3 stations are just old beatup workstations.


At 11:05 AM 8/31/2009, you wrote:
>
>
>We use pioneers, im not sure if that's the best choice, if I had to do
>it all over again I might go with a windows terminal setup for cost
>control, we have not had any issues to date with performance or
>reliability of the pioneers.
>
>Rob Bucek
>
>Manufacturing Engineer
>
>PH: (715) 284-5376 ext 3111
>
>FAX: (715)284-4084
>
><<http://www.dsmfg.com/>http://www.dsmfg.com/>
>
>(Click the logo to view our site)
><<http://www.dsmfg.com/>http://www.dsmfg.com/>
>
>From: <mailto:vantage%40yahoogroups.com>vantage@yahoogroups.com
>[mailto:vantage@yahoogroups.com] On Behalf
>Of bschafbu
>Sent: Saturday, August 29, 2009 2:27 PM
>To: <mailto:vantage%40yahoogroups.com>vantage@yahoogroups.com
>Subject: [Vantage] Touch Screen Monitors with MES
>
>Hello -
>
>Wondering if anyone has any suggestions for a particular touch screen
>make and/or model. We're looking to purchase a monitor to simulate it's
>use in on our floor with MES.
>
>Thanks-
>
>Bob Schafbuch
>Integrated DNA Technologies
>
>[Non-text portions of this message have been removed]
>
>


[Non-text portions of this message have been removed]