UserGuides Blank Title 58978

As a beta tester, I just got one the other day. Very nice book. Nice
looking too.



Joe Rojas

Information Technology Manager

Symmetry Medical TNCO

15 Colebrook Blvd

Whitman MA 02382

781.447.6661 x7506



From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Michael McWilliams
Sent: Friday, September 14, 2007 3:25 PM
To: vantage@yahoogroups.com
Subject: [Vantage] UserGuides



I just found out that next week they will be releasing a userguide
for Developer/Tools.
--- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> , Todd
Caughey <caugheyt@...> wrote:
>
> Jasper,
> I think you can order it from the epicor web site....or call your
CAM. They have been giving out copies here and there at roadshows
and user meetings. Likely they will be available for sale (or
order) at Perspectives. I thought each site was supposed to get
one copy but I might have been wrong about that. I think they run
$50 each. While not a lot of in-depth info they are a good
complement for the on-line help. Very good illustrations and
examples of screens. I understand (via rumor mill) there will be
subsequent documentation of the same type for specific areas such as
MRP and (hopefully) 8.x system administration.
> -Todd C.
>
>
> ________________________________
> From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf Of Jasper Recto
> Sent: Thursday, September 06, 2007 1:20 PM
> To: 'vantage@yahoogroups.com <mailto:%27vantage%40yahoogroups.com> '
> Subject: RE: [Vantage] Re: Mics SurCharges
>
>
> Thanks for the Information.
>
> Do you know where can I get the whole User Guide?
>
> Thanks,
> Jasper
>
> -----Original Message-----
> From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>]On
Behalf Of akasals
> Sent: Thursday, September 06, 2007 11:49 AM
> To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
> Subject: [Vantage] Re: Mics SurCharges
>
> First you must set up Misc charges thru Finance<AP<Setup<Misc
> Charges/Credits.
> You can give the charge a code and apply the correct GL code.
> When entering an invoice on the Line Miscellaneous Charge grid.
Click
> within the Miscellaneous Charges field, and select the charge from
> the drop down list.
>
> If needed you can edit the description to make it directly apply to
> the current invoice line. Enter the amount.
>
> I do recomend the Epicor Manufacturing User Guide pg 200 will help
> you. If you like I can PDF you a copy of the page.
>
> Thanks
> Sals
>
> --- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>,
Jasper Recto <jrecto@> wrote:
> >
> > How do different companies capture surcharges? Do you add them to
> your PO? What if the surcharges show up unexpectedly?
> >
> > Any suggestions or ideas?
> >
> > Thanks,
> > Jasper
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
> [Non-text portions of this message have been removed]
>
>
>
> ________________________________
> The information contained in this E-mail message and any documents
which may be attached are privileged and confidential, and may be
protected from disclosure.
>
> Please be aware that any use, printing, copying, disclosure or
dissemination of this communication may be subject to legal
restriction or sanction. If you think you have received this message
in error, please reply to the sender.
>
> For more information please visit www.harveyvogel.com
>
>
> [Non-text portions of this message have been removed]
>





[Non-text portions of this message have been removed]
How do different companies capture surcharges? Do you add them to your PO? What if the surcharges show up unexpectedly?

Any suggestions or ideas?

Thanks,
Jasper



[Non-text portions of this message have been removed]
First you must set up Misc charges thru Finance<AP<Setup<Misc
Charges/Credits.
You can give the charge a code and apply the correct GL code.
When entering an invoice on the Line Miscellaneous Charge grid. Click
within the Miscellaneous Charges field, and select the charge from
the drop down list.

If needed you can edit the description to make it directly apply to
the current invoice line. Enter the amount.

I do recomend the Epicor Manufacturing User Guide pg 200 will help
you. If you like I can PDF you a copy of the page.

Thanks
Sals




--- In vantage@yahoogroups.com, Jasper Recto <jrecto@...> wrote:
>
> How do different companies capture surcharges? Do you add them to
your PO? What if the surcharges show up unexpectedly?
>
> Any suggestions or ideas?
>
> Thanks,
> Jasper
>
>
>
> [Non-text portions of this message have been removed]
>
Thanks for the Information.

Do you know where can I get the whole User Guide?

Thanks,
Jasper

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf Of akasals
Sent: Thursday, September 06, 2007 11:49 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: Mics SurCharges



First you must set up Misc charges thru Finance<AP<Setup<­Misc
Charges/Credits.
You can give the charge a code and apply the correct GL code.
When entering an invoice on the Line Miscellaneous Charge grid. Click
within the Miscellaneous Charges field, and select the charge from
the drop down list.

If needed you can edit the description to make it directly apply to
the current invoice line. Enter the amount.

I do recomend the Epicor Manufacturing User Guide pg 200 will help
you. If you like I can PDF you a copy of the page.

Thanks
Sals

--- In vantage@yahoogroups­.com<mailto:vantage%40yahoogroups.com>, Jasper Recto <jrecto@...> wrote:
>
> How do different companies capture surcharges? Do you add them to
your PO? What if the surcharges show up unexpectedly?
>
> Any suggestions or ideas?
>
> Thanks,
> Jasper
>
>
>
> [Non-text portions of this message have been removed]
>







[Non-text portions of this message have been removed]
Jasper,
I think you can order it from the epicor web site....or call your CAM. They have been giving out copies here and there at roadshows and user meetings. Likely they will be available for sale (or order) at Perspectives. I thought each site was supposed to get one copy but I might have been wrong about that. I think they run $50 each. While not a lot of in-depth info they are a good complement for the on-line help. Very good illustrations and examples of screens. I understand (via rumor mill) there will be subsequent documentation of the same type for specific areas such as MRP and (hopefully) 8.x system administration.
-Todd C.


________________________________
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Jasper Recto
Sent: Thursday, September 06, 2007 1:20 PM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Re: Mics SurCharges


Thanks for the Information.

Do you know where can I get the whole User Guide?

Thanks,
Jasper

-----Original Message-----
From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>]On Behalf Of akasals
Sent: Thursday, September 06, 2007 11:49 AM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
Subject: [Vantage] Re: Mics SurCharges

First you must set up Misc charges thru Finance<AP<Setup<Misc
Charges/Credits.
You can give the charge a code and apply the correct GL code.
When entering an invoice on the Line Miscellaneous Charge grid. Click
within the Miscellaneous Charges field, and select the charge from
the drop down list.

If needed you can edit the description to make it directly apply to
the current invoice line. Enter the amount.

I do recomend the Epicor Manufacturing User Guide pg 200 will help
you. If you like I can PDF you a copy of the page.

Thanks
Sals

--- In vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>, Jasper Recto <jrecto@...> wrote:
>
> How do different companies capture surcharges? Do you add them to
your PO? What if the surcharges show up unexpectedly?
>
> Any suggestions or ideas?
>
> Thanks,
> Jasper
>
>
>
> [Non-text portions of this message have been removed]
>

[Non-text portions of this message have been removed]



________________________________
The information contained in this E-mail message and any documents which may be attached are privileged and confidential, and may be protected from disclosure.

Please be aware that any use, printing, copying, disclosure or dissemination of this communication may be subject to legal restriction or sanction. If you think you have received this message in error, please reply to the sender.

For more information please visit www.harveyvogel.com


[Non-text portions of this message have been removed]
Thanks Todd,

I have contacted my CAM and will be getting one. They do have a Tool Guide for $250. My CAM told me that its more specific on such areas as MRP, Scheduling, etc...

The only problem is that you can only get the user guide or tool guide for version 8.x. We are still on version 6.1 so it will only be informational to me.

Thanks!
Jasper

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf Of Todd Caughey
Sent: Thursday, September 06, 2007 2:37 PM
To: vantage@yahoogroups.com
Subject: RE: RE: [Vantage] Re: Mics SurCharges



Jasper,
I think you can order it from the epicor web site....or call your CAM. They have been giving out copies here and there at roadshows and user meetings. Likely they will be available for sale (or order) at Perspectives. I thought each site was supposed to get one copy but I might have been wrong about that. I think they run $50 each. While not a lot of in-depth info they are a good complement for the on-line help. Very good illustrations and examples of screens. I understand (via rumor mill) there will be subsequent documentation of the same type for specific areas such as MRP and (hopefully) 8.x system administration.
-Todd C.

________________________________
From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf Of Jasper Recto
Sent: Thursday, September 06, 2007 1:20 PM
To: 'vantage@yahoogroups.com<mailto:%27vantage%40yahoogroups.com>'
Subject: RE: [Vantage] Re: Mics SurCharges

Thanks for the Information.

Do you know where can I get the whole User Guide?

Thanks,
Jasper

-----Original Message-----
From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com> [mailto: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>]On Behalf Of akasals
Sent: Thursday, September 06, 2007 11:49 AM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>
Subject: [Vantage] Re: Mics SurCharges

First you must set up Misc charges thru Finance<AP<Setup<Misc
Charges/Credits.
You can give the charge a code and apply the correct GL code.
When entering an invoice on the Line Miscellaneous Charge grid. Click
within the Miscellaneous Charges field, and select the charge from
the drop down list.

If needed you can edit the description to make it directly apply to
the current invoice line. Enter the amount.

I do recomend the Epicor Manufacturing User Guide pg 200 will help
you. If you like I can PDF you a copy of the page.

Thanks
Sals

--- In vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com><mailto:vantage%40yahoogroups.com>, Jasper Recto <jrecto@...> wrote:
>
> How do different companies capture surcharges? Do you add them to
your PO? What if the surcharges show up unexpectedly?
>
> Any suggestions or ideas?
>
> Thanks,
> Jasper
>
>
>
> [Non-text portions of this message have been removed]
>

[Non-text portions of this message have been removed]

________________________________
The information contained in this E-mail message and any documents which may be attached are privileged and confidential, and may be protected from disclosure.

Please be aware that any use, printing, copying, disclosure or dissemination of this communication may be subject to legal restriction or sanction. If you think you have received this message in error, please reply to the sender.

For more information please visit www.harveyvogel.com

[Non-text portions of this message have been removed]







[Non-text portions of this message have been removed]
I just found out that next week they will be releasing a userguide
for Developer/Tools.
--- In vantage@yahoogroups.com, Todd Caughey <caugheyt@...> wrote:
>
> Jasper,
> I think you can order it from the epicor web site....or call your
CAM. They have been giving out copies here and there at roadshows
and user meetings. Likely they will be available for sale (or
order) at Perspectives. I thought each site was supposed to get
one copy but I might have been wrong about that. I think they run
$50 each. While not a lot of in-depth info they are a good
complement for the on-line help. Very good illustrations and
examples of screens. I understand (via rumor mill) there will be
subsequent documentation of the same type for specific areas such as
MRP and (hopefully) 8.x system administration.
> -Todd C.
>
>
> ________________________________
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
Behalf Of Jasper Recto
> Sent: Thursday, September 06, 2007 1:20 PM
> To: 'vantage@yahoogroups.com'
> Subject: RE: [Vantage] Re: Mics SurCharges
>
>
> Thanks for the Information.
>
> Do you know where can I get the whole User Guide?
>
> Thanks,
> Jasper
>
> -----Original Message-----
> From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>]On
Behalf Of akasals
> Sent: Thursday, September 06, 2007 11:49 AM
> To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
> Subject: [Vantage] Re: Mics SurCharges
>
> First you must set up Misc charges thru Finance<AP<Setup<Misc
> Charges/Credits.
> You can give the charge a code and apply the correct GL code.
> When entering an invoice on the Line Miscellaneous Charge grid.
Click
> within the Miscellaneous Charges field, and select the charge from
> the drop down list.
>
> If needed you can edit the description to make it directly apply to
> the current invoice line. Enter the amount.
>
> I do recomend the Epicor Manufacturing User Guide pg 200 will help
> you. If you like I can PDF you a copy of the page.
>
> Thanks
> Sals
>
> --- In vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>,
Jasper Recto <jrecto@> wrote:
> >
> > How do different companies capture surcharges? Do you add them to
> your PO? What if the surcharges show up unexpectedly?
> >
> > Any suggestions or ideas?
> >
> > Thanks,
> > Jasper
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
> [Non-text portions of this message have been removed]
>
>
>
> ________________________________
> The information contained in this E-mail message and any documents
which may be attached are privileged and confidential, and may be
protected from disclosure.
>
> Please be aware that any use, printing, copying, disclosure or
dissemination of this communication may be subject to legal
restriction or sanction. If you think you have received this message
in error, please reply to the sender.
>
> For more information please visit www.harveyvogel.com
>
>
> [Non-text portions of this message have been removed]
>