Vantage 5.0 + ODBC 3.6 + XP SP2

Hello Brandon,

Thank you, I just applied the outerjoin registry fix, that fixed the
problem.

Thanks Again,

Dan Shallbetter
States Electric Mfg.


________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Brandon Murch
Sent: Tuesday, August 23, 2005 2:42 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Vantage 5.0 + ODBC 3.6 + XP SP2


How are your joins setup?

Brandon R Murch
Supervisor of Information Technology
WindStone Medical Packaging
406.259.6387
bmurch@... <mailto:bmurch@...>

-----Original Message-----
From: Dan Shallbetter [mailto:dans@...]
Sent: Tuesday, August 23, 2005 1:42 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Vantage 5.0 + ODBC 3.6 + XP SP2

The report verifies ok. When I try to refresh the report after entering
the password is when I get the 7587 error. The message is error detected
by database dll.

Dan


________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Brandon Murch
Sent: Tuesday, August 23, 2005 2:33 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Vantage 5.0 + ODBC 3.6 + XP SP2


One more thing...does it bring up a formula editor by chance after
clicking the error? We had a client that was using a different version
of crystal than what the report was written in and it did not understand
the "&" when joining strings together...

Brandon R Murch
Supervisor of Information Technology
WindStone Medical Packaging
406.259.6387
bmurch@... <mailto:bmurch@...>

-----Original Message-----
From: Dan Shallbetter [mailto:dans@...]
Sent: Tuesday, August 23, 2005 1:15 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Vantage 5.0 + ODBC 3.6 + XP SP2

Rebuilding my development client after a hard drive failure. After
loading Crystal Professional 8.5 & service pack 3. I am unable to open a
previous custom report containing an ODBC subreport created on my old
XP SP1 machine. I get a Merant Syntax Error 7587. Progress's KB says its
a system error, and to contact them. Vantage says recreate the report on
the machine with SP2, or run the report on a pre XP SP2 client. I have
disabled the firewall without any luck. I can create a new ODBC report,
so I know my DSN is ok. Anybody running Vantage 5.0 using Progress 9.1D?
(supported XP verision) Any insight into the 7587 error?

Thanks

Dan Shallbetter
States Electric Mfg.



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links



SPONSORED LINKS
Technical support
<http://groups.yahoo.com/gads?t=ms&k=Technical+support&w1=Technical+supp
ort&w2=Vantage&w3=Database&w4=Database+management+software&w5=Membership
+database+software&w6=Church+database+software&c=6&s=148&.sig=D_JdAFeHAo
eH6OugOKk1Yg>
Vantage
<http://groups.yahoo.com/gads?t=ms&k=Vantage&w1=Technical+support&w2=Van
tage&w3=Database&w4=Database+management+software&w5=Membership+database+
software&w6=Church+database+software&c=6&s=148&.sig=8zJYQk3edGWFMUVgup9j
Kw>
Database
<http://groups.yahoo.com/gads?t=ms&k=Database&w1=Technical+support&w2=Va
ntage&w3=Database&w4=Database+management+software&w5=Membership+database
+software&w6=Church+database+software&c=6&s=148&.sig=PnI9nhHllVsjEbHxRXs
1IQ>
Database management software
<http://groups.yahoo.com/gads?t=ms&k=Database+management+software&w1=Tec
hnical+support&w2=Vantage&w3=Database&w4=Database+management+software&w5
=Membership+database+software&w6=Church+database+software&c=6&s=148&.sig
=fKR9gtx-Yh-u9MWSh0_-hA>
Membership database software
<http://groups.yahoo.com/gads?t=ms&k=Membership+database+software&w1=Tec
hnical+support&w2=Vantage&w3=Database&w4=Database+management+software&w5
=Membership+database+software&w6=Church+database+software&c=6&s=148&.sig
=Nu4StMQZ8LT26M5TzRGQlg>
Church database software
<http://groups.yahoo.com/gads?t=ms&k=Church+database+software&w1=Technic
al+support&w2=Vantage&w3=Database&w4=Database+management+software&w5=Mem
bership+database+software&w6=Church+database+software&c=6&s=148&.sig=UAi
Qi3Ftbp7Qnq6ys_yZxg>

_____

YAHOO! GROUPS LINKS

* Visit your group "vantage
<http://groups.yahoo.com/group/vantage> " on the web.

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .

_____



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links




SPONSORED LINKS
Technical support
<http://groups.yahoo.com/gads?t=ms&k=Technical+support&w1=Technical+supp
ort&w2=Vantage&w3=Database&w4=Database+management+software&w5=Membership
+database+software&w6=Church+database+software&c=6&s=148&.sig=D_JdAFeHAo
eH6OugOKk1Yg> Vantage
<http://groups.yahoo.com/gads?t=ms&k=Vantage&w1=Technical+support&w2=Van
tage&w3=Database&w4=Database+management+software&w5=Membership+database+
software&w6=Church+database+software&c=6&s=148&.sig=8zJYQk3edGWFMUVgup9j
Kw> Database
<http://groups.yahoo.com/gads?t=ms&k=Database&w1=Technical+support&w2=Va
ntage&w3=Database&w4=Database+management+software&w5=Membership+database
+software&w6=Church+database+software&c=6&s=148&.sig=PnI9nhHllVsjEbHxRXs
1IQ>
Database management software
<http://groups.yahoo.com/gads?t=ms&k=Database+management+software&w1=Tec
hnical+support&w2=Vantage&w3=Database&w4=Database+management+software&w5
=Membership+database+software&w6=Church+database+software&c=6&s=148&.sig
=fKR9gtx-Yh-u9MWSh0_-hA> Membership database software
<http://groups.yahoo.com/gads?t=ms&k=Membership+database+software&w1=Tec
hnical+support&w2=Vantage&w3=Database&w4=Database+management+software&w5
=Membership+database+software&w6=Church+database+software&c=6&s=148&.sig
=Nu4StMQZ8LT26M5TzRGQlg> Church database software
<http://groups.yahoo.com/gads?t=ms&k=Church+database+software&w1=Technic
al+support&w2=Vantage&w3=Database&w4=Database+management+software&w5=Mem
bership+database+software&w6=Church+database+software&c=6&s=148&.sig=UAi
Qi3Ftbp7Qnq6ys_yZxg>

________________________________

YAHOO! GROUPS LINKS



* Visit your group "vantage
<http://groups.yahoo.com/group/vantage> " on the web.

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .


________________________________




[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links



SPONSORED LINKS
Technical support
<http://groups.yahoo.com/gads?t=ms&k=Technical+support&w1=Technical+supp
ort&w2=Vantage&w3=Database&w4=Database+management+software&w5=Membership
+database+software&w6=Church+database+software&c=6&s=148&.sig=D_JdAFeHAo
eH6OugOKk1Yg>
Vantage
<http://groups.yahoo.com/gads?t=ms&k=Vantage&w1=Technical+support&w2=Van
tage&w3=Database&w4=Database+management+software&w5=Membership+database+
software&w6=Church+database+software&c=6&s=148&.sig=8zJYQk3edGWFMUVgup9j
Kw>
Database
<http://groups.yahoo.com/gads?t=ms&k=Database&w1=Technical+support&w2=Va
ntage&w3=Database&w4=Database+management+software&w5=Membership+database
+software&w6=Church+database+software&c=6&s=148&.sig=PnI9nhHllVsjEbHxRXs
1IQ>
Database management software
<http://groups.yahoo.com/gads?t=ms&k=Database+management+software&w1=Tec
hnical+support&w2=Vantage&w3=Database&w4=Database+management+software&w5
=Membership+database+software&w6=Church+database+software&c=6&s=148&.sig
=fKR9gtx-Yh-u9MWSh0_-hA>
Membership database software
<http://groups.yahoo.com/gads?t=ms&k=Membership+database+software&w1=Tec
hnical+support&w2=Vantage&w3=Database&w4=Database+management+software&w5
=Membership+database+software&w6=Church+database+software&c=6&s=148&.sig
=Nu4StMQZ8LT26M5TzRGQlg>
Church database software
<http://groups.yahoo.com/gads?t=ms&k=Church+database+software&w1=Technic
al+support&w2=Vantage&w3=Database&w4=Database+management+software&w5=Mem
bership+database+software&w6=Church+database+software&c=6&s=148&.sig=UAi
Qi3Ftbp7Qnq6ys_yZxg>

_____

YAHOO! GROUPS LINKS

* Visit your group "vantage
<http://groups.yahoo.com/group/vantage> " on the web.

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .

_____



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links



________________________________

YAHOO! GROUPS LINKS



* Visit your group "vantage
<http://groups.yahoo.com/group/vantage> " on the web.

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .


________________________________




[Non-text portions of this message have been removed]
Rebuilding my development client after a hard drive failure. After
loading Crystal Professional 8.5 & service pack 3. I am unable to open a
previous custom report containing an ODBC subreport created on my old
XP SP1 machine. I get a Merant Syntax Error 7587. Progress's KB says its
a system error, and to contact them. Vantage says recreate the report on
the machine with SP2, or run the report on a pre XP SP2 client. I have
disabled the firewall without any luck. I can create a new ODBC report,
so I know my DSN is ok. Anybody running Vantage 5.0 using Progress 9.1D?
(supported XP verision) Any insight into the 7587 error?

Thanks

Dan Shallbetter
States Electric Mfg.



[Non-text portions of this message have been removed]
Syntax error 7587 is usually caused by a bad SQL statement. Does it
give any other messages or just the 7587? I would try verifying the
database before refreshing report data and see what happens...


Brandon R Murch
Supervisor of Information Technology
WindStone Medical Packaging
406.259.6387
bmurch@... <mailto:bmurch@...>

-----Original Message-----
From: Dan Shallbetter [mailto:dans@...]
Sent: Tuesday, August 23, 2005 1:15 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Vantage 5.0 + ODBC 3.6 + XP SP2

Rebuilding my development client after a hard drive failure. After
loading Crystal Professional 8.5 & service pack 3. I am unable to open a
previous custom report containing an ODBC subreport created on my old
XP SP1 machine. I get a Merant Syntax Error 7587. Progress's KB says its
a system error, and to contact them. Vantage says recreate the report on
the machine with SP2, or run the report on a pre XP SP2 client. I have
disabled the firewall without any luck. I can create a new ODBC report,
so I know my DSN is ok. Anybody running Vantage 5.0 using Progress 9.1D?
(supported XP verision) Any insight into the 7587 error?

Thanks

Dan Shallbetter
States Electric Mfg.



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links



SPONSORED LINKS
Technical support
<http://groups.yahoo.com/gads?t=ms&k=Technical+support&w1=Technical+supp
ort&w2=Vantage&w3=Database&w4=Database+management+software&w5=Membership
+database+software&w6=Church+database+software&c=6&s=148&.sig=D_JdAFeHAo
eH6OugOKk1Yg>
Vantage
<http://groups.yahoo.com/gads?t=ms&k=Vantage&w1=Technical+support&w2=Van
tage&w3=Database&w4=Database+management+software&w5=Membership+database+
software&w6=Church+database+software&c=6&s=148&.sig=8zJYQk3edGWFMUVgup9j
Kw>
Database
<http://groups.yahoo.com/gads?t=ms&k=Database&w1=Technical+support&w2=Va
ntage&w3=Database&w4=Database+management+software&w5=Membership+database
+software&w6=Church+database+software&c=6&s=148&.sig=PnI9nhHllVsjEbHxRXs
1IQ>
Database management software
<http://groups.yahoo.com/gads?t=ms&k=Database+management+software&w1=Tec
hnical+support&w2=Vantage&w3=Database&w4=Database+management+software&w5
=Membership+database+software&w6=Church+database+software&c=6&s=148&.sig
=fKR9gtx-Yh-u9MWSh0_-hA>
Membership database software
<http://groups.yahoo.com/gads?t=ms&k=Membership+database+software&w1=Tec
hnical+support&w2=Vantage&w3=Database&w4=Database+management+software&w5
=Membership+database+software&w6=Church+database+software&c=6&s=148&.sig
=Nu4StMQZ8LT26M5TzRGQlg>
Church database software
<http://groups.yahoo.com/gads?t=ms&k=Church+database+software&w1=Technic
al+support&w2=Vantage&w3=Database&w4=Database+management+software&w5=Mem
bership+database+software&w6=Church+database+software&c=6&s=148&.sig=UAi
Qi3Ftbp7Qnq6ys_yZxg>

_____

YAHOO! GROUPS LINKS

* Visit your group "vantage
<http://groups.yahoo.com/group/vantage> " on the web.

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .

_____



[Non-text portions of this message have been removed]
One more thing...does it bring up a formula editor by chance after
clicking the error? We had a client that was using a different version
of crystal than what the report was written in and it did not understand
the "&" when joining strings together...

Brandon R Murch
Supervisor of Information Technology
WindStone Medical Packaging
406.259.6387
bmurch@... <mailto:bmurch@...>

-----Original Message-----
From: Dan Shallbetter [mailto:dans@...]
Sent: Tuesday, August 23, 2005 1:15 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Vantage 5.0 + ODBC 3.6 + XP SP2

Rebuilding my development client after a hard drive failure. After
loading Crystal Professional 8.5 & service pack 3. I am unable to open a
previous custom report containing an ODBC subreport created on my old
XP SP1 machine. I get a Merant Syntax Error 7587. Progress's KB says its
a system error, and to contact them. Vantage says recreate the report on
the machine with SP2, or run the report on a pre XP SP2 client. I have
disabled the firewall without any luck. I can create a new ODBC report,
so I know my DSN is ok. Anybody running Vantage 5.0 using Progress 9.1D?
(supported XP verision) Any insight into the 7587 error?

Thanks

Dan Shallbetter
States Electric Mfg.



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links



SPONSORED LINKS
Technical support
<http://groups.yahoo.com/gads?t=ms&k=Technical+support&w1=Technical+supp
ort&w2=Vantage&w3=Database&w4=Database+management+software&w5=Membership
+database+software&w6=Church+database+software&c=6&s=148&.sig=D_JdAFeHAo
eH6OugOKk1Yg>
Vantage
<http://groups.yahoo.com/gads?t=ms&k=Vantage&w1=Technical+support&w2=Van
tage&w3=Database&w4=Database+management+software&w5=Membership+database+
software&w6=Church+database+software&c=6&s=148&.sig=8zJYQk3edGWFMUVgup9j
Kw>
Database
<http://groups.yahoo.com/gads?t=ms&k=Database&w1=Technical+support&w2=Va
ntage&w3=Database&w4=Database+management+software&w5=Membership+database
+software&w6=Church+database+software&c=6&s=148&.sig=PnI9nhHllVsjEbHxRXs
1IQ>
Database management software
<http://groups.yahoo.com/gads?t=ms&k=Database+management+software&w1=Tec
hnical+support&w2=Vantage&w3=Database&w4=Database+management+software&w5
=Membership+database+software&w6=Church+database+software&c=6&s=148&.sig
=fKR9gtx-Yh-u9MWSh0_-hA>
Membership database software
<http://groups.yahoo.com/gads?t=ms&k=Membership+database+software&w1=Tec
hnical+support&w2=Vantage&w3=Database&w4=Database+management+software&w5
=Membership+database+software&w6=Church+database+software&c=6&s=148&.sig
=Nu4StMQZ8LT26M5TzRGQlg>
Church database software
<http://groups.yahoo.com/gads?t=ms&k=Church+database+software&w1=Technic
al+support&w2=Vantage&w3=Database&w4=Database+management+software&w5=Mem
bership+database+software&w6=Church+database+software&c=6&s=148&.sig=UAi
Qi3Ftbp7Qnq6ys_yZxg>

_____

YAHOO! GROUPS LINKS

* Visit your group "vantage
<http://groups.yahoo.com/group/vantage> " on the web.

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .

_____



[Non-text portions of this message have been removed]
The report verifies ok. When I try to refresh the report after entering
the password is when I get the 7587 error. The message is error detected
by database dll.

Dan


________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Brandon Murch
Sent: Tuesday, August 23, 2005 2:33 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Vantage 5.0 + ODBC 3.6 + XP SP2


One more thing...does it bring up a formula editor by chance after
clicking the error? We had a client that was using a different version
of crystal than what the report was written in and it did not understand
the "&" when joining strings together...

Brandon R Murch
Supervisor of Information Technology
WindStone Medical Packaging
406.259.6387
bmurch@... <mailto:bmurch@...>

-----Original Message-----
From: Dan Shallbetter [mailto:dans@...]
Sent: Tuesday, August 23, 2005 1:15 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Vantage 5.0 + ODBC 3.6 + XP SP2

Rebuilding my development client after a hard drive failure. After
loading Crystal Professional 8.5 & service pack 3. I am unable to open a
previous custom report containing an ODBC subreport created on my old
XP SP1 machine. I get a Merant Syntax Error 7587. Progress's KB says its
a system error, and to contact them. Vantage says recreate the report on
the machine with SP2, or run the report on a pre XP SP2 client. I have
disabled the firewall without any luck. I can create a new ODBC report,
so I know my DSN is ok. Anybody running Vantage 5.0 using Progress 9.1D?
(supported XP verision) Any insight into the 7587 error?

Thanks

Dan Shallbetter
States Electric Mfg.



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links



SPONSORED LINKS
Technical support
<http://groups.yahoo.com/gads?t=ms&k=Technical+support&w1=Technical+supp
ort&w2=Vantage&w3=Database&w4=Database+management+software&w5=Membership
+database+software&w6=Church+database+software&c=6&s=148&.sig=D_JdAFeHAo
eH6OugOKk1Yg>
Vantage
<http://groups.yahoo.com/gads?t=ms&k=Vantage&w1=Technical+support&w2=Van
tage&w3=Database&w4=Database+management+software&w5=Membership+database+
software&w6=Church+database+software&c=6&s=148&.sig=8zJYQk3edGWFMUVgup9j
Kw>
Database
<http://groups.yahoo.com/gads?t=ms&k=Database&w1=Technical+support&w2=Va
ntage&w3=Database&w4=Database+management+software&w5=Membership+database
+software&w6=Church+database+software&c=6&s=148&.sig=PnI9nhHllVsjEbHxRXs
1IQ>
Database management software
<http://groups.yahoo.com/gads?t=ms&k=Database+management+software&w1=Tec
hnical+support&w2=Vantage&w3=Database&w4=Database+management+software&w5
=Membership+database+software&w6=Church+database+software&c=6&s=148&.sig
=fKR9gtx-Yh-u9MWSh0_-hA>
Membership database software
<http://groups.yahoo.com/gads?t=ms&k=Membership+database+software&w1=Tec
hnical+support&w2=Vantage&w3=Database&w4=Database+management+software&w5
=Membership+database+software&w6=Church+database+software&c=6&s=148&.sig
=Nu4StMQZ8LT26M5TzRGQlg>
Church database software
<http://groups.yahoo.com/gads?t=ms&k=Church+database+software&w1=Technic
al+support&w2=Vantage&w3=Database&w4=Database+management+software&w5=Mem
bership+database+software&w6=Church+database+software&c=6&s=148&.sig=UAi
Qi3Ftbp7Qnq6ys_yZxg>

_____

YAHOO! GROUPS LINKS

* Visit your group "vantage
<http://groups.yahoo.com/group/vantage> " on the web.

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .

_____



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links




SPONSORED LINKS
Technical support
<http://groups.yahoo.com/gads?t=ms&k=Technical+support&w1=Technical+supp
ort&w2=Vantage&w3=Database&w4=Database+management+software&w5=Membership
+database+software&w6=Church+database+software&c=6&s=148&.sig=D_JdAFeHAo
eH6OugOKk1Yg> Vantage
<http://groups.yahoo.com/gads?t=ms&k=Vantage&w1=Technical+support&w2=Van
tage&w3=Database&w4=Database+management+software&w5=Membership+database+
software&w6=Church+database+software&c=6&s=148&.sig=8zJYQk3edGWFMUVgup9j
Kw> Database
<http://groups.yahoo.com/gads?t=ms&k=Database&w1=Technical+support&w2=Va
ntage&w3=Database&w4=Database+management+software&w5=Membership+database
+software&w6=Church+database+software&c=6&s=148&.sig=PnI9nhHllVsjEbHxRXs
1IQ>
Database management software
<http://groups.yahoo.com/gads?t=ms&k=Database+management+software&w1=Tec
hnical+support&w2=Vantage&w3=Database&w4=Database+management+software&w5
=Membership+database+software&w6=Church+database+software&c=6&s=148&.sig
=fKR9gtx-Yh-u9MWSh0_-hA> Membership database software
<http://groups.yahoo.com/gads?t=ms&k=Membership+database+software&w1=Tec
hnical+support&w2=Vantage&w3=Database&w4=Database+management+software&w5
=Membership+database+software&w6=Church+database+software&c=6&s=148&.sig
=Nu4StMQZ8LT26M5TzRGQlg> Church database software
<http://groups.yahoo.com/gads?t=ms&k=Church+database+software&w1=Technic
al+support&w2=Vantage&w3=Database&w4=Database+management+software&w5=Mem
bership+database+software&w6=Church+database+software&c=6&s=148&.sig=UAi
Qi3Ftbp7Qnq6ys_yZxg>

________________________________

YAHOO! GROUPS LINKS



* Visit your group "vantage
<http://groups.yahoo.com/group/vantage> " on the web.

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .


________________________________




[Non-text portions of this message have been removed]
How are your joins setup?

Brandon R Murch
Supervisor of Information Technology
WindStone Medical Packaging
406.259.6387
bmurch@... <mailto:bmurch@...>

-----Original Message-----
From: Dan Shallbetter [mailto:dans@...]
Sent: Tuesday, August 23, 2005 1:42 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Vantage 5.0 + ODBC 3.6 + XP SP2

The report verifies ok. When I try to refresh the report after entering
the password is when I get the 7587 error. The message is error detected
by database dll.

Dan


________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Brandon Murch
Sent: Tuesday, August 23, 2005 2:33 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Vantage 5.0 + ODBC 3.6 + XP SP2


One more thing...does it bring up a formula editor by chance after
clicking the error? We had a client that was using a different version
of crystal than what the report was written in and it did not understand
the "&" when joining strings together...

Brandon R Murch
Supervisor of Information Technology
WindStone Medical Packaging
406.259.6387
bmurch@... <mailto:bmurch@...>

-----Original Message-----
From: Dan Shallbetter [mailto:dans@...]
Sent: Tuesday, August 23, 2005 1:15 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Vantage 5.0 + ODBC 3.6 + XP SP2

Rebuilding my development client after a hard drive failure. After
loading Crystal Professional 8.5 & service pack 3. I am unable to open a
previous custom report containing an ODBC subreport created on my old
XP SP1 machine. I get a Merant Syntax Error 7587. Progress's KB says its
a system error, and to contact them. Vantage says recreate the report on
the machine with SP2, or run the report on a pre XP SP2 client. I have
disabled the firewall without any luck. I can create a new ODBC report,
so I know my DSN is ok. Anybody running Vantage 5.0 using Progress 9.1D?
(supported XP verision) Any insight into the 7587 error?

Thanks

Dan Shallbetter
States Electric Mfg.



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links



SPONSORED LINKS
Technical support
<http://groups.yahoo.com/gads?t=ms&k=Technical+support&w1=Technical+supp
ort&w2=Vantage&w3=Database&w4=Database+management+software&w5=Membership
+database+software&w6=Church+database+software&c=6&s=148&.sig=D_JdAFeHAo
eH6OugOKk1Yg>
Vantage
<http://groups.yahoo.com/gads?t=ms&k=Vantage&w1=Technical+support&w2=Van
tage&w3=Database&w4=Database+management+software&w5=Membership+database+
software&w6=Church+database+software&c=6&s=148&.sig=8zJYQk3edGWFMUVgup9j
Kw>
Database
<http://groups.yahoo.com/gads?t=ms&k=Database&w1=Technical+support&w2=Va
ntage&w3=Database&w4=Database+management+software&w5=Membership+database
+software&w6=Church+database+software&c=6&s=148&.sig=PnI9nhHllVsjEbHxRXs
1IQ>
Database management software
<http://groups.yahoo.com/gads?t=ms&k=Database+management+software&w1=Tec
hnical+support&w2=Vantage&w3=Database&w4=Database+management+software&w5
=Membership+database+software&w6=Church+database+software&c=6&s=148&.sig
=fKR9gtx-Yh-u9MWSh0_-hA>
Membership database software
<http://groups.yahoo.com/gads?t=ms&k=Membership+database+software&w1=Tec
hnical+support&w2=Vantage&w3=Database&w4=Database+management+software&w5
=Membership+database+software&w6=Church+database+software&c=6&s=148&.sig
=Nu4StMQZ8LT26M5TzRGQlg>
Church database software
<http://groups.yahoo.com/gads?t=ms&k=Church+database+software&w1=Technic
al+support&w2=Vantage&w3=Database&w4=Database+management+software&w5=Mem
bership+database+software&w6=Church+database+software&c=6&s=148&.sig=UAi
Qi3Ftbp7Qnq6ys_yZxg>

_____

YAHOO! GROUPS LINKS

* Visit your group "vantage
<http://groups.yahoo.com/group/vantage> " on the web.

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .

_____



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links




SPONSORED LINKS
Technical support
<http://groups.yahoo.com/gads?t=ms&k=Technical+support&w1=Technical+supp
ort&w2=Vantage&w3=Database&w4=Database+management+software&w5=Membership
+database+software&w6=Church+database+software&c=6&s=148&.sig=D_JdAFeHAo
eH6OugOKk1Yg> Vantage
<http://groups.yahoo.com/gads?t=ms&k=Vantage&w1=Technical+support&w2=Van
tage&w3=Database&w4=Database+management+software&w5=Membership+database+
software&w6=Church+database+software&c=6&s=148&.sig=8zJYQk3edGWFMUVgup9j
Kw> Database
<http://groups.yahoo.com/gads?t=ms&k=Database&w1=Technical+support&w2=Va
ntage&w3=Database&w4=Database+management+software&w5=Membership+database
+software&w6=Church+database+software&c=6&s=148&.sig=PnI9nhHllVsjEbHxRXs
1IQ>
Database management software
<http://groups.yahoo.com/gads?t=ms&k=Database+management+software&w1=Tec
hnical+support&w2=Vantage&w3=Database&w4=Database+management+software&w5
=Membership+database+software&w6=Church+database+software&c=6&s=148&.sig
=fKR9gtx-Yh-u9MWSh0_-hA> Membership database software
<http://groups.yahoo.com/gads?t=ms&k=Membership+database+software&w1=Tec
hnical+support&w2=Vantage&w3=Database&w4=Database+management+software&w5
=Membership+database+software&w6=Church+database+software&c=6&s=148&.sig
=Nu4StMQZ8LT26M5TzRGQlg> Church database software
<http://groups.yahoo.com/gads?t=ms&k=Church+database+software&w1=Technic
al+support&w2=Vantage&w3=Database&w4=Database+management+software&w5=Mem
bership+database+software&w6=Church+database+software&c=6&s=148&.sig=UAi
Qi3Ftbp7Qnq6ys_yZxg>

________________________________

YAHOO! GROUPS LINKS



* Visit your group "vantage
<http://groups.yahoo.com/group/vantage> " on the web.

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .


________________________________




[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links



SPONSORED LINKS
Technical support
<http://groups.yahoo.com/gads?t=ms&k=Technical+support&w1=Technical+supp
ort&w2=Vantage&w3=Database&w4=Database+management+software&w5=Membership
+database+software&w6=Church+database+software&c=6&s=148&.sig=D_JdAFeHAo
eH6OugOKk1Yg>
Vantage
<http://groups.yahoo.com/gads?t=ms&k=Vantage&w1=Technical+support&w2=Van
tage&w3=Database&w4=Database+management+software&w5=Membership+database+
software&w6=Church+database+software&c=6&s=148&.sig=8zJYQk3edGWFMUVgup9j
Kw>
Database
<http://groups.yahoo.com/gads?t=ms&k=Database&w1=Technical+support&w2=Va
ntage&w3=Database&w4=Database+management+software&w5=Membership+database
+software&w6=Church+database+software&c=6&s=148&.sig=PnI9nhHllVsjEbHxRXs
1IQ>
Database management software
<http://groups.yahoo.com/gads?t=ms&k=Database+management+software&w1=Tec
hnical+support&w2=Vantage&w3=Database&w4=Database+management+software&w5
=Membership+database+software&w6=Church+database+software&c=6&s=148&.sig
=fKR9gtx-Yh-u9MWSh0_-hA>
Membership database software
<http://groups.yahoo.com/gads?t=ms&k=Membership+database+software&w1=Tec
hnical+support&w2=Vantage&w3=Database&w4=Database+management+software&w5
=Membership+database+software&w6=Church+database+software&c=6&s=148&.sig
=Nu4StMQZ8LT26M5TzRGQlg>
Church database software
<http://groups.yahoo.com/gads?t=ms&k=Church+database+software&w1=Technic
al+support&w2=Vantage&w3=Database&w4=Database+management+software&w5=Mem
bership+database+software&w6=Church+database+software&c=6&s=148&.sig=UAi
Qi3Ftbp7Qnq6ys_yZxg>

_____

YAHOO! GROUPS LINKS

* Visit your group "vantage
<http://groups.yahoo.com/group/vantage> " on the web.

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .

_____



[Non-text portions of this message have been removed]