Vantage 5.1 Customer Utilization Seminar 12/6/01

This was an excellent program. I agree with Patrick. It is too bad we
couldn't have been in 2 classrooms at the same time. The information given
was very useful. The Transaction Flow of Vantage session could have lasted
all morning. The amount of information that was obtained in that short
space of time was excellent. Many people who think they know how this
program works, found out a lot more.

The lunch wasn't bad and some people really liked the chocolate chip
cookies.

Thank you Anne etc. a JOB WELL DONE!!!

-----Original Message-----
From: Winter, Patrick [mailto:pjw@...]
Sent: Friday, December 07, 2001 9:13 AM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Vantage 5.1 Customer Utilization Seminar 12/6/01.


I would also like to make some brief scattered comments:
This was an excellent day of training/information sharing.
Epicor should be proud, another job well done.
AMM Module is a huge addition and looks very comprehensive for a first
release.
Quality Enhancements for First Article and Visibility from Job Tracker are
also significant.
CorVu Reporting (New EBI) looks like a huge improvement over EBI prior to
Version 5.1.
Wish I could have been in 2 class rooms at once to have seen more.

Patrick Winter
sSc Specialty Screw Corporation
Vantage 5.00.317, Progress 9.1a

-----Original Message-----
From: dsoup68 [mailto:dsoukup@...]
Sent: Friday, December 07, 2001 8:47 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Vantage 5.1 Customer Utilization Seminar 12/6/01.


Well, for those that did not get a chance to go to the "Vantage 5.1
Customer Utilization Seminar 12/6/01." This item only cost you your
time away from home and in my opinion was well worth that time.
Epicor did a very nice job on setting up the days schedule with
multiple items to share. I my self attended "Transaction Flow of
Vantage," "Vantage IT Round Table," and "Quality Assurance." The
sessions we well rounded in showing you, the new as well as answering
question from past and present versions. I only wish more people
would have attended the "IT Round Table." I just wanted to learn even
more in that area. The end of the day finished with a very good "Open
Forum." That did turn out to be very useful to both us as users as
well as Epicor gaining more information on subjects that have not been
told to Tech Support...The big item that everyone should take serious
if you are currently paying for you maintenance is the latest survey.
This is a VERY BIG item and could use everyone?s attention in filling
it out. Currently if I have the numbers right, they only have
received in 200 surveys as of this week. We did have the opportunity
to meet Mark from Epicor (Product Development Manager/Tech Support),
if I have his title right. Mark did receive many new items to work on
and is open to hearing what other items are out there, "YOU JUST NEED
TO CALL" in and get you name on the list...

Darrin Soukup
Accurate Gauge & Mfg., Inc.




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Well, for those that did not get a chance to go to the "Vantage 5.1
Customer Utilization Seminar 12/6/01." This item only cost you your
time away from home and in my opinion was well worth that time.
Epicor did a very nice job on setting up the days schedule with
multiple items to share. I my self attended "Transaction Flow of
Vantage," "Vantage IT Round Table," and "Quality Assurance." The
sessions we well rounded in showing you, the new as well as answering
question from past and present versions. I only wish more people
would have attended the "IT Round Table." I just wanted to learn even
more in that area. The end of the day finished with a very good "Open
Forum." That did turn out to be very useful to both us as users as
well as Epicor gaining more information on subjects that have not been
told to Tech Support...The big item that everyone should take serious
if you are currently paying for you maintenance is the latest survey.
This is a VERY BIG item and could use everyone?s attention in filling
it out. Currently if I have the numbers right, they only have
received in 200 surveys as of this week. We did have the opportunity
to meet Mark from Epicor (Product Development Manager/Tech Support),
if I have his title right. Mark did receive many new items to work on
and is open to hearing what other items are out there, "YOU JUST NEED
TO CALL" in and get you name on the list...

Darrin Soukup
Accurate Gauge & Mfg., Inc.
I would also like to make some brief scattered comments:
This was an excellent day of training/information sharing.
Epicor should be proud, another job well done.
AMM Module is a huge addition and looks very comprehensive for a first
release.
Quality Enhancements for First Article and Visibility from Job Tracker are
also significant.
CorVu Reporting (New EBI) looks like a huge improvement over EBI prior to
Version 5.1.
Wish I could have been in 2 class rooms at once to have seen more.

Patrick Winter
sSc Specialty Screw Corporation
Vantage 5.00.317, Progress 9.1a

-----Original Message-----
From: dsoup68 [mailto:dsoukup@...]
Sent: Friday, December 07, 2001 8:47 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Vantage 5.1 Customer Utilization Seminar 12/6/01.


Well, for those that did not get a chance to go to the "Vantage 5.1
Customer Utilization Seminar 12/6/01." This item only cost you your
time away from home and in my opinion was well worth that time.
Epicor did a very nice job on setting up the days schedule with
multiple items to share. I my self attended "Transaction Flow of
Vantage," "Vantage IT Round Table," and "Quality Assurance." The
sessions we well rounded in showing you, the new as well as answering
question from past and present versions. I only wish more people
would have attended the "IT Round Table." I just wanted to learn even
more in that area. The end of the day finished with a very good "Open
Forum." That did turn out to be very useful to both us as users as
well as Epicor gaining more information on subjects that have not been
told to Tech Support...The big item that everyone should take serious
if you are currently paying for you maintenance is the latest survey.
This is a VERY BIG item and could use everyone?s attention in filling
it out. Currently if I have the numbers right, they only have
received in 200 surveys as of this week. We did have the opportunity
to meet Mark from Epicor (Product Development Manager/Tech Support),
if I have his title right. Mark did receive many new items to work on
and is open to hearing what other items are out there, "YOU JUST NEED
TO CALL" in and get you name on the list...

Darrin Soukup
Accurate Gauge & Mfg., Inc.




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
What was the Vantage 5.1 Customer Utilization Seminar and where was this
held? I had not heard of this before.

-----Original Message-----
From: dsoup68 [mailto:dsoukup@...]
Sent: Friday, December 07, 2001 9:47 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Vantage 5.1 Customer Utilization Seminar 12/6/01.


Well, for those that did not get a chance to go to the "Vantage 5.1
Customer Utilization Seminar 12/6/01." This item only cost you your
time away from home and in my opinion was well worth that time.
Epicor did a very nice job on setting up the days schedule with
multiple items to share. I my self attended "Transaction Flow of
Vantage," "Vantage IT Round Table," and "Quality Assurance." The
sessions we well rounded in showing you, the new as well as answering
question from past and present versions. I only wish more people
would have attended the "IT Round Table." I just wanted to learn even
more in that area. The end of the day finished with a very good "Open
Forum." That did turn out to be very useful to both us as users as
well as Epicor gaining more information on subjects that have not been
told to Tech Support...The big item that everyone should take serious
if you are currently paying for you maintenance is the latest survey.
This is a VERY BIG item and could use everyone?s attention in filling
it out. Currently if I have the numbers right, they only have
received in 200 surveys as of this week. We did have the opportunity
to meet Mark from Epicor (Product Development Manager/Tech Support),
if I have his title right. Mark did receive many new items to work on
and is open to hearing what other items are out there, "YOU JUST NEED
TO CALL" in and get you name on the list...

Darrin Soukup
Accurate Gauge & Mfg., Inc.




Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/M=178320.1681224.3270152.1261774/D=egroupweb/S=17050071
83:HM/A=879171/R=0/*http://www.fastweb.com/ib/yahoo-57f>

<http://us.adserver.yahoo.com/l?M=178320.1681224.3270152.1261774/D=egroupmai
l/S=1705007183:HM/A=879171/rand=309405508>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
Can I have the schedule for these seminars, please?
Thanks!
René Comeau
Imperial Signs

-----Original Message-----
From: Winter, Patrick [mailto:pjw@...]
Sent: December 7, 2001 11:13
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Vantage 5.1 Customer Utilization Seminar 12/6/01.


I would also like to make some brief scattered comments:
This was an excellent day of training/information sharing.
Epicor should be proud, another job well done.
AMM Module is a huge addition and looks very comprehensive for a first
release.
Quality Enhancements for First Article and Visibility from Job Tracker are
also significant.
CorVu Reporting (New EBI) looks like a huge improvement over EBI prior to
Version 5.1.
Wish I could have been in 2 class rooms at once to have seen more.

Patrick Winter
sSc Specialty Screw Corporation
Vantage 5.00.317, Progress 9.1a

-----Original Message-----
From: dsoup68 [mailto:dsoukup@...]
Sent: Friday, December 07, 2001 8:47 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Vantage 5.1 Customer Utilization Seminar 12/6/01.


Well, for those that did not get a chance to go to the "Vantage 5.1
Customer Utilization Seminar 12/6/01." This item only cost you your
time away from home and in my opinion was well worth that time.
Epicor did a very nice job on setting up the days schedule with
multiple items to share. I my self attended "Transaction Flow of
Vantage," "Vantage IT Round Table," and "Quality Assurance." The
sessions we well rounded in showing you, the new as well as answering
question from past and present versions. I only wish more people
would have attended the "IT Round Table." I just wanted to learn even
more in that area. The end of the day finished with a very good "Open
Forum." That did turn out to be very useful to both us as users as
well as Epicor gaining more information on subjects that have not been
told to Tech Support...The big item that everyone should take serious
if you are currently paying for you maintenance is the latest survey.
This is a VERY BIG item and could use everyone?s attention in filling
it out. Currently if I have the numbers right, they only have
received in 200 surveys as of this week. We did have the opportunity
to meet Mark from Epicor (Product Development Manager/Tech Support),
if I have his title right. Mark did receive many new items to work on
and is open to hearing what other items are out there, "YOU JUST NEED
TO CALL" in and get you name on the list...

Darrin Soukup
Accurate Gauge & Mfg., Inc.




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
I think it was a one time deal for the Chicago crowd, were slow learners and
need to stay after eSchool once and a while.

Patrick

-----Original Message-----
From: Rene Comeau [mailto:rcomeau@...]
Sent: Friday, December 07, 2001 9:51 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Vantage 5.1 Customer Utilization Seminar 12/6/01.


Can I have the schedule for these seminars, please?
Thanks!
René Comeau
Imperial Signs

-----Original Message-----
From: Winter, Patrick [mailto:pjw@...]
Sent: December 7, 2001 11:13
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Vantage 5.1 Customer Utilization Seminar 12/6/01.


I would also like to make some brief scattered comments:
This was an excellent day of training/information sharing.
Epicor should be proud, another job well done.
AMM Module is a huge addition and looks very comprehensive for a first
release.
Quality Enhancements for First Article and Visibility from Job Tracker are
also significant.
CorVu Reporting (New EBI) looks like a huge improvement over EBI prior to
Version 5.1.
Wish I could have been in 2 class rooms at once to have seen more.

Patrick Winter
sSc Specialty Screw Corporation
Vantage 5.00.317, Progress 9.1a

-----Original Message-----
From: dsoup68 [mailto:dsoukup@...]
Sent: Friday, December 07, 2001 8:47 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Vantage 5.1 Customer Utilization Seminar 12/6/01.


Well, for those that did not get a chance to go to the "Vantage 5.1
Customer Utilization Seminar 12/6/01." This item only cost you your
time away from home and in my opinion was well worth that time.
Epicor did a very nice job on setting up the days schedule with
multiple items to share. I my self attended "Transaction Flow of
Vantage," "Vantage IT Round Table," and "Quality Assurance." The
sessions we well rounded in showing you, the new as well as answering
question from past and present versions. I only wish more people
would have attended the "IT Round Table." I just wanted to learn even
more in that area. The end of the day finished with a very good "Open
Forum." That did turn out to be very useful to both us as users as
well as Epicor gaining more information on subjects that have not been
told to Tech Support...The big item that everyone should take serious
if you are currently paying for you maintenance is the latest survey.
This is a VERY BIG item and could use everyone?s attention in filling
it out. Currently if I have the numbers right, they only have
received in 200 surveys as of this week. We did have the opportunity
to meet Mark from Epicor (Product Development Manager/Tech Support),
if I have his title right. Mark did receive many new items to work on
and is open to hearing what other items are out there, "YOU JUST NEED
TO CALL" in and get you name on the list...

Darrin Soukup
Accurate Gauge & Mfg., Inc.




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/