Vantage 6.0 Job Screen

Yahoo Archive
1
I would have to agree that it is a big improvement.

Rich
--------------------------------------------
Richard Laroche
Network Planning and Integration (ISA, MCP, MCSE)
TurboCare
phone: 413 593 0500 Ext 343
fax: 413 593 3424
www.turbocare.com
mailto:rlaroche@...
--------------------------------------------

-----Original Message-----
From: Dan Tisone [mailto:dtisone@...]
Sent: Monday, July 07, 2003 3:57 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Vantage 6.0 Job Screen


I don't know what you guys are talking about, I can only assume that
"change" in general is the problem. The GUI based Job Entry is much
better then the old one especially when you can now adjust the tabs, #
of panes, font size, etc... and save those settings for each user to
their specifications. In addition once you schedule a job you can see
what parts are having delivery prblems by the little red dot or which
parts have been issued by the little green checkmark. I think you guys
should spend some more time on this screen.

Dan Tisone
Operations / IT Consultant
dan.tisone@...




-----Original Message-----
From: Mike Lowe [mailto:MLowe@...]
Sent: Monday, July 07, 2003 12:39 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Vantage 6.0 Job Screen


Is there an official request with doc number for having the option to
view 'old school style'? If enough people express an interest to have
it back the old way perhaps it will be considered as an option.

I know our facilities will 'attach' themselves to this document if it
exists.

Mike Lowe
Connor Manufacturing Services

-----Original Message-----
From: Paul Lipham [mailto:pml@...]
Sent: Monday, July 07, 2003 12:34 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Vantage 6.0 Job Screen


I'm having the same problem on 5.2 with production control. They hate
the new tree design in job entry. Epicor's response was that after they
use the new interface for a few weeks they will never want to go back to
the old way. Good luck at getting any answers from Epicor.

Paul L.
-----Original Message-----
From: Fredy Venczel [mailto:fvenczel@...]
Sent: Monday, July 07, 2003 2:19 PM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Vantage 6.0 Job Screen


Jeremy,
I'm still on 5.0 but tested 5.2 a little while back and I believe the
look
of Job Entry is carried over to 6.0. In 5.2 you had different view
options.
It should be the same in 6.0

Fredy Venczel

-----Original Message-----
From: Leonard, Jeremy [SMTP:jleonard@...]
Sent: July 7, 2003 14:44
To: 'Vantage@yahoogroups.com'
Subject: [Vantage] Vantage 6.0 Job Screen

We are currently on 5.1 and are reviewing Vantage 6.0. I just
finished
going through 6.0 with our Production Control Manager and he's
is
not happy
about some of the changes in 6.0. He doesn't like that he has
to
click on
different tabs to see Subassembly, Operation, Material and Job
header
information when it used to be on one screen. Can anyone
explain to
me what
advantage the new screen has over the old one to warrant such a
change?
What are the benefits? I am hoping to find some amazing reason
why
they
made this change. It looks flashy but doesn't flow as nicely as
the
old
screen.

Thanks
Jeremy Leonard
IT Manager
K-T Corporation





Yahoo! Groups Sponsor
ADVERTISEMENT




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

<http://rd.yahoo.com/M=249982.3512844.4795476.1261774/D=egroupweb/S=1705
007183:HM/A=1524963/R=0/SIG=12o72ctft/*http://hits.411web.com/cgi-bin/au
toredir?camp=556&lineid=3512844&prop=egroupweb&pos=HM>

<http://us.adserver.yahoo.com/l?M=249982.3512844.4795476.1261774/D=egrou
pmail/S=:HM/A=1524963/rand=316249057>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
2
We are currently on 5.1 and are reviewing Vantage 6.0. I just finished
going through 6.0 with our Production Control Manager and he's is not happy
about some of the changes in 6.0. He doesn't like that he has to click on
different tabs to see Subassembly, Operation, Material and Job header
information when it used to be on one screen. Can anyone explain to me what
advantage the new screen has over the old one to warrant such a change?
What are the benefits? I am hoping to find some amazing reason why they
made this change. It looks flashy but doesn't flow as nicely as the old
screen.

Thanks
Jeremy Leonard
IT Manager
K-T Corporation
3
Jeremy,
I'm still on 5.0 but tested 5.2 a little while back and I believe the look
of Job Entry is carried over to 6.0. In 5.2 you had different view options.
It should be the same in 6.0

Fredy Venczel

-----Original Message-----
From: Leonard, Jeremy [SMTP:jleonard@...]
Sent: July 7, 2003 14:44
To: 'Vantage@yahoogroups.com'
Subject: [Vantage] Vantage 6.0 Job Screen

We are currently on 5.1 and are reviewing Vantage 6.0. I just
finished
going through 6.0 with our Production Control Manager and he's is
not happy
about some of the changes in 6.0. He doesn't like that he has to
click on
different tabs to see Subassembly, Operation, Material and Job
header
information when it used to be on one screen. Can anyone explain to
me what
advantage the new screen has over the old one to warrant such a
change?
What are the benefits? I am hoping to find some amazing reason why
they
made this change. It looks flashy but doesn't flow as nicely as the
old
screen.

Thanks
Jeremy Leonard
IT Manager
K-T Corporation
4
I'm having the same problem on 5.2 with production control. They hate the
new tree design in job entry. Epicor's response was that after they use the
new interface for a few weeks they will never want to go back to the old
way. Good luck at getting any answers from Epicor.

Paul L.
-----Original Message-----
From: Fredy Venczel [mailto:fvenczel@...]
Sent: Monday, July 07, 2003 2:19 PM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Vantage 6.0 Job Screen


Jeremy,
I'm still on 5.0 but tested 5.2 a little while back and I believe the look
of Job Entry is carried over to 6.0. In 5.2 you had different view
options.
It should be the same in 6.0

Fredy Venczel

-----Original Message-----
From: Leonard, Jeremy [SMTP:jleonard@...]
Sent: July 7, 2003 14:44
To: 'Vantage@yahoogroups.com'
Subject: [Vantage] Vantage 6.0 Job Screen

We are currently on 5.1 and are reviewing Vantage 6.0. I just
finished
going through 6.0 with our Production Control Manager and he's is
not happy
about some of the changes in 6.0. He doesn't like that he has to
click on
different tabs to see Subassembly, Operation, Material and Job
header
information when it used to be on one screen. Can anyone explain to
me what
advantage the new screen has over the old one to warrant such a
change?
What are the benefits? I am hoping to find some amazing reason why
they
made this change. It looks flashy but doesn't flow as nicely as the
old
screen.

Thanks
Jeremy Leonard
IT Manager
K-T Corporation





Yahoo! Groups Sponsor
ADVERTISEMENT




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


[Non-text portions of this message have been removed]
5
Is there an official request with doc number for having the option to view 'old school style'? If enough people express an interest to have it back the old way perhaps it will be considered as an option.

I know our facilities will 'attach' themselves to this document if it exists.

Mike Lowe
Connor Manufacturing Services

-----Original Message-----
From: Paul Lipham [mailto:pml@...]
Sent: Monday, July 07, 2003 12:34 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Vantage 6.0 Job Screen


I'm having the same problem on 5.2 with production control. They hate the
new tree design in job entry. Epicor's response was that after they use the
new interface for a few weeks they will never want to go back to the old
way. Good luck at getting any answers from Epicor.

Paul L.
-----Original Message-----
From: Fredy Venczel [mailto:fvenczel@...]
Sent: Monday, July 07, 2003 2:19 PM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Vantage 6.0 Job Screen


Jeremy,
I'm still on 5.0 but tested 5.2 a little while back and I believe the look
of Job Entry is carried over to 6.0. In 5.2 you had different view
options.
It should be the same in 6.0

Fredy Venczel

-----Original Message-----
From: Leonard, Jeremy [SMTP:jleonard@...]
Sent: July 7, 2003 14:44
To: 'Vantage@yahoogroups.com'
Subject: [Vantage] Vantage 6.0 Job Screen

We are currently on 5.1 and are reviewing Vantage 6.0. I just
finished
going through 6.0 with our Production Control Manager and he's is
not happy
about some of the changes in 6.0. He doesn't like that he has to
click on
different tabs to see Subassembly, Operation, Material and Job
header
information when it used to be on one screen. Can anyone explain to
me what
advantage the new screen has over the old one to warrant such a
change?
What are the benefits? I am hoping to find some amazing reason why
they
made this change. It looks flashy but doesn't flow as nicely as the
old
screen.

Thanks
Jeremy Leonard
IT Manager
K-T Corporation





Yahoo! Groups Sponsor
ADVERTISEMENT




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor
<http://rd.yahoo.com/M=249982.3512844.4795476.1261774/D=egroupweb/S=1705007183:HM/A=1524963/R=0/SIG=12o72ctft/*http://hits.411web.com/cgi-bin/autoredir?camp=556&lineid=3512844&prop=egroupweb&pos=HM>
<http://us.adserver.yahoo.com/l?M=249982.3512844.4795476.1261774/D=egroupmail/S=:HM/A=1524963/rand=316249057>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
6
I don't know what you guys are talking about, I can only assume that
"change" in general is the problem. The GUI based Job Entry is much
better then the old one especially when you can now adjust the tabs, #
of panes, font size, etc... and save those settings for each user to
their specifications. In addition once you schedule a job you can see
what parts are having delivery prblems by the little red dot or which
parts have been issued by the little green checkmark. I think you guys
should spend some more time on this screen.

Dan Tisone
Operations / IT Consultant
dan.tisone@...




-----Original Message-----
From: Mike Lowe [mailto:MLowe@...]
Sent: Monday, July 07, 2003 12:39 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Vantage 6.0 Job Screen


Is there an official request with doc number for having the option to
view 'old school style'? If enough people express an interest to have
it back the old way perhaps it will be considered as an option.

I know our facilities will 'attach' themselves to this document if it
exists.

Mike Lowe
Connor Manufacturing Services

-----Original Message-----
From: Paul Lipham [mailto:pml@...]
Sent: Monday, July 07, 2003 12:34 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Vantage 6.0 Job Screen


I'm having the same problem on 5.2 with production control. They hate
the new tree design in job entry. Epicor's response was that after they
use the new interface for a few weeks they will never want to go back to
the old way. Good luck at getting any answers from Epicor.

Paul L.
-----Original Message-----
From: Fredy Venczel [mailto:fvenczel@...]
Sent: Monday, July 07, 2003 2:19 PM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Vantage 6.0 Job Screen


Jeremy,
I'm still on 5.0 but tested 5.2 a little while back and I believe the
look
of Job Entry is carried over to 6.0. In 5.2 you had different view
options.
It should be the same in 6.0

Fredy Venczel

-----Original Message-----
From: Leonard, Jeremy [SMTP:jleonard@...]
Sent: July 7, 2003 14:44
To: 'Vantage@yahoogroups.com'
Subject: [Vantage] Vantage 6.0 Job Screen

We are currently on 5.1 and are reviewing Vantage 6.0. I just
finished
going through 6.0 with our Production Control Manager and he's
is
not happy
about some of the changes in 6.0. He doesn't like that he has
to
click on
different tabs to see Subassembly, Operation, Material and Job
header
information when it used to be on one screen. Can anyone
explain to
me what
advantage the new screen has over the old one to warrant such a
change?
What are the benefits? I am hoping to find some amazing reason
why
they
made this change. It looks flashy but doesn't flow as nicely as
the
old
screen.

Thanks
Jeremy Leonard
IT Manager
K-T Corporation





Yahoo! Groups Sponsor
ADVERTISEMENT




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

<http://rd.yahoo.com/M=249982.3512844.4795476.1261774/D=egroupweb/S=1705
007183:HM/A=1524963/R=0/SIG=12o72ctft/*http://hits.411web.com/cgi-bin/au
toredir?camp=556&lineid=3512844&prop=egroupweb&pos=HM>

<http://us.adserver.yahoo.com/l?M=249982.3512844.4795476.1261774/D=egrou
pmail/S=:HM/A=1524963/rand=316249057>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
7
Hey Group,

Since upgrading to Vantage 5.2 I have had an error, " promsgs unable to
open message file" pop up when users try and login to Vantage. It usually
happens in the morning when everyone is logging in. I don't know what
causes this error, but it goes away after a few minutes. I'm thinking a
certain user is locking a promsgs file and after they login or crash out the
error goes away.

Have any of you seen this error?

Paul Lipham
Alabama Specialty Products, Inc.


[Non-text portions of this message have been removed]