Vantage 6.1 / Changing an open job's bottom linecost

This might be a discussion better left to calling than emailing. So
much is involved and it does hurt re-ordering to some degree depending
on what you do.



And I am not even sure how it works in version 6. I've worked with 6.1
in the past but never 6.



Let me know if you want to discuss further!







Manasa

630.806.2000 x1515





________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Paul Smith
Sent: Wednesday, June 22, 2011 11:55 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Re: Vantage 6.1 / Changing an open job's bottom
linecost.





If I could step in, Manasa you said you back flush everything, how much
material do you back flush and what are you manufacturing? We are using
vantage 6 and are looking at back flushing (we are still in the crawl of
crawl, walk, run phase but getting there slowly) What are your thoughts
with back flushing and how would it interact with the suggestions for
re-ordering? Really any information would be helpful. Thanks in advance.

________________________________
From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf Of Manasa Reddy
Sent: Wednesday, June 22, 2011 12:20 PM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] Re: Vantage 6.1 / Changing an open job's bottom
line cost.

I'm wondering if backflushing would work for you?

We backflush everything and pretty much nothing hits WIP until we ship.
If he is looking to do just the labor this might work for him.

Manasa

630.806.2000 x1515

________________________________

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com
<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>]
On Behalf
Of Zack
Sent: Wednesday, June 22, 2011 11:01 AM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
Subject: [Vantage] Re: Vantage 6.1 / Changing an open job's bottom line
cost.

Mike,

Thanks for the reply. He said he'd like to move it to Manufacturing
Variance Expense. Basically he wants to know how he could write off the
cost of a job, while still keeping the job open.

Thanks,
Z

--- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com> ,
"Mike Lowe" <MLowe@...> wrote:
>
> Where does he want the costs moved to from an accounting perspective?
>
>
>
> From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com> ]
On
Behalf
> Of Zack
> Sent: Wednesday, June 22, 2011 7:05 AM
> To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
> Subject: [Vantage] Vantage 6.1 / Changing an open job's bottom line
> cost.
>
>
>
>
>
> Hello,
>
> My boss was wondering if there's an easy way to change a job's bottom
> line cost without going through each operation and changing labor to
0.
> We have a few long-running jobs that have been in WIP for a very long
> time, and he wants the costs to be changed to zero. Any ideas?
>
> Thanks,
> Z
>
>
>
>
> __________________________________________________________
> This email has been scanned by the Connor Manufacturing Services Email
> Security System.
> For more information please visit http://www.messagelabs.com/email
> __________________________________________________________
>
>
>
> [Non-text portions of this message have been removed]
>

[Non-text portions of this message have been removed]

________________________________

The information contained in this message is intended solely for the
individual it is specifically and originally addressed. This message and
its contents may contain confidential or privileged information. If you
are not the intended recipient, you are hereby notified that any
disclosure or distribution, or taking any action in reliance on the
content of this information is strictly prohibited. If you received this
message in error, please delete it from any computer and notify the
sender. If you suspect that this message may have been altered, please
notify the sender.

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
Hello,

My boss was wondering if there's an easy way to change a job's bottom line cost without going through each operation and changing labor to 0. We have a few long-running jobs that have been in WIP for a very long time, and he wants the costs to be changed to zero. Any ideas?

Thanks,
Z
Where does he want the costs moved to from an accounting perspective?



From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Zack
Sent: Wednesday, June 22, 2011 7:05 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Vantage 6.1 / Changing an open job's bottom line
cost.





Hello,

My boss was wondering if there's an easy way to change a job's bottom
line cost without going through each operation and changing labor to 0.
We have a few long-running jobs that have been in WIP for a very long
time, and he wants the costs to be changed to zero. Any ideas?

Thanks,
Z




______________________________________________________________________
This email has been scanned by the Connor Manufacturing Services Email
Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________



[Non-text portions of this message have been removed]
Mike,

Thanks for the reply. He said he'd like to move it to Manufacturing Variance Expense. Basically he wants to know how he could write off the cost of a job, while still keeping the job open.

Thanks,
Z

--- In vantage@yahoogroups.com, "Mike Lowe" <MLowe@...> wrote:
>
> Where does he want the costs moved to from an accounting perspective?
>
>
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
> Of Zack
> Sent: Wednesday, June 22, 2011 7:05 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Vantage 6.1 / Changing an open job's bottom line
> cost.
>
>
>
>
>
> Hello,
>
> My boss was wondering if there's an easy way to change a job's bottom
> line cost without going through each operation and changing labor to 0.
> We have a few long-running jobs that have been in WIP for a very long
> time, and he wants the costs to be changed to zero. Any ideas?
>
> Thanks,
> Z
>
>
>
>
> ______________________________________________________________________
> This email has been scanned by the Connor Manufacturing Services Email
> Security System.
> For more information please visit http://www.messagelabs.com/email
> ______________________________________________________________________
>
>
>
> [Non-text portions of this message have been removed]
>
I'm wondering if backflushing would work for you?



We backflush everything and pretty much nothing hits WIP until we ship.
If he is looking to do just the labor this might work for him.







Manasa

630.806.2000 x1515





________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Zack
Sent: Wednesday, June 22, 2011 11:01 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: Vantage 6.1 / Changing an open job's bottom line
cost.





Mike,

Thanks for the reply. He said he'd like to move it to Manufacturing
Variance Expense. Basically he wants to know how he could write off the
cost of a job, while still keeping the job open.

Thanks,
Z

--- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ,
"Mike Lowe" <MLowe@...> wrote:
>
> Where does he want the costs moved to from an accounting perspective?
>
>
>
> From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf
> Of Zack
> Sent: Wednesday, June 22, 2011 7:05 AM
> To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> Subject: [Vantage] Vantage 6.1 / Changing an open job's bottom line
> cost.
>
>
>
>
>
> Hello,
>
> My boss was wondering if there's an easy way to change a job's bottom
> line cost without going through each operation and changing labor to
0.
> We have a few long-running jobs that have been in WIP for a very long
> time, and he wants the costs to be changed to zero. Any ideas?
>
> Thanks,
> Z
>
>
>
>
> __________________________________________________________
> This email has been scanned by the Connor Manufacturing Services Email
> Security System.
> For more information please visit http://www.messagelabs.com/email
> __________________________________________________________
>
>
>
> [Non-text portions of this message have been removed]
>





[Non-text portions of this message have been removed]
If I could step in, Manasa you said you back flush everything, how much material do you back flush and what are you manufacturing? We are using vantage 6 and are looking at back flushing (we are still in the crawl of crawl, walk, run phase but getting there slowly) What are your thoughts with back flushing and how would it interact with the suggestions for re-ordering? Really any information would be helpful. Thanks in advance.




________________________________
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Manasa Reddy
Sent: Wednesday, June 22, 2011 12:20 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Re: Vantage 6.1 / Changing an open job's bottom line cost.



I'm wondering if backflushing would work for you?

We backflush everything and pretty much nothing hits WIP until we ship.
If he is looking to do just the labor this might work for him.

Manasa

630.806.2000 x1515

________________________________

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf
Of Zack
Sent: Wednesday, June 22, 2011 11:01 AM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
Subject: [Vantage] Re: Vantage 6.1 / Changing an open job's bottom line
cost.

Mike,

Thanks for the reply. He said he'd like to move it to Manufacturing
Variance Expense. Basically he wants to know how he could write off the
cost of a job, while still keeping the job open.

Thanks,
Z

--- In vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com> ,
"Mike Lowe" <MLowe@...> wrote:
>
> Where does he want the costs moved to from an accounting perspective?
>
>
>
> From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com> ] On
Behalf
> Of Zack
> Sent: Wednesday, June 22, 2011 7:05 AM
> To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
> Subject: [Vantage] Vantage 6.1 / Changing an open job's bottom line
> cost.
>
>
>
>
>
> Hello,
>
> My boss was wondering if there's an easy way to change a job's bottom
> line cost without going through each operation and changing labor to
0.
> We have a few long-running jobs that have been in WIP for a very long
> time, and he wants the costs to be changed to zero. Any ideas?
>
> Thanks,
> Z
>
>
>
>
> __________________________________________________________
> This email has been scanned by the Connor Manufacturing Services Email
> Security System.
> For more information please visit http://www.messagelabs.com/email
> __________________________________________________________
>
>
>
> [Non-text portions of this message have been removed]
>

[Non-text portions of this message have been removed]





________________________________


The information contained in this message is intended solely for the individual it is specifically and originally addressed. This message and its contents may contain confidential or privileged information. If you are not the intended recipient, you are hereby notified that any disclosure or distribution, or taking any action in reliance on the content of this information is strictly prohibited. If you received this message in error, please delete it from any computer and notify the sender. If you suspect that this message may have been altered, please notify the sender.


[Non-text portions of this message have been removed]
Once question

If you use back flushing would the WIP account not be credited once the back flush is conducted? Thanks again



________________________________
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Manasa Reddy
Sent: Wednesday, June 22, 2011 12:20 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Re: Vantage 6.1 / Changing an open job's bottom line cost.



I'm wondering if backflushing would work for you?

We backflush everything and pretty much nothing hits WIP until we ship.
If he is looking to do just the labor this might work for him.

Manasa

630.806.2000 x1515

________________________________

From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf
Of Zack
Sent: Wednesday, June 22, 2011 11:01 AM
To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
Subject: [Vantage] Re: Vantage 6.1 / Changing an open job's bottom line
cost.

Mike,

Thanks for the reply. He said he'd like to move it to Manufacturing
Variance Expense. Basically he wants to know how he could write off the
cost of a job, while still keeping the job open.

Thanks,
Z

--- In vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com> ,
"Mike Lowe" <MLowe@...> wrote:
>
> Where does he want the costs moved to from an accounting perspective?
>
>
>
> From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com> ] On
Behalf
> Of Zack
> Sent: Wednesday, June 22, 2011 7:05 AM
> To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> <mailto:vantage%40yahoogroups.com>
> Subject: [Vantage] Vantage 6.1 / Changing an open job's bottom line
> cost.
>
>
>
>
>
> Hello,
>
> My boss was wondering if there's an easy way to change a job's bottom
> line cost without going through each operation and changing labor to
0.
> We have a few long-running jobs that have been in WIP for a very long
> time, and he wants the costs to be changed to zero. Any ideas?
>
> Thanks,
> Z
>
>
>
>
> __________________________________________________________
> This email has been scanned by the Connor Manufacturing Services Email
> Security System.
> For more information please visit http://www.messagelabs.com/email
> __________________________________________________________
>
>
>
> [Non-text portions of this message have been removed]
>

[Non-text portions of this message have been removed]





________________________________


The information contained in this message is intended solely for the individual it is specifically and originally addressed. This message and its contents may contain confidential or privileged information. If you are not the intended recipient, you are hereby notified that any disclosure or distribution, or taking any action in reliance on the content of this information is strictly prohibited. If you received this message in error, please delete it from any computer and notify the sender. If you suspect that this message may have been altered, please notify the sender.


[Non-text portions of this message have been removed]