# Vantqage and Citrix
**Category:** [Yahoo Archive](https://www.epiusers.help/c/yahoo-archive/9)
**Created:** 2001-01-16 11:29 UTC
**Views:** 557
**Replies:** 14
**URL:** https://www.epiusers.help/t/vantqage-and-citrix/1940
---
## Post #1 by @system
I am interested in speaking to companies that have installed Citrix and thin
client for use within their own buildings. Due to distance we are
considering it. Any suggestions, pitfalls?, etc. Application would be for
less than 5 users at current
Keith E. Taylor
Vice President
LBSi
Business Systems Consultants (Progress based ERP packages)
216/476-1416 ext 26
keith@...Hi everyone! I'm going to purchase the new Crystal Reports v8.0 for the eManufacturing upgrade. Do I need the Standard, Professional, or Developer's edition? Currently, I have the standard edition for customizing. I'm assuming that the Standard 8.0 is the same?
Wendy Bowen (Pursche)
Network Administrator
Schmald Tool & Die, Inc.
(810) 743-1600 ext.323
wpursche@...
[Non-text portions of this message have been removed]
Wendy;
When I bought (not using yet) CR v8.0, I was told, the differences between
the 3 are:
Standard is single user
Professional I believe gives you 5 licenses and more functionality
Developer Provides the greatest functionality, more
programming and the multiple users
This isn't necessarily total fact but the best that I have. We have found
the best pricing from a mail order place called Programmers Paradise. Web
site is programmersparadise.com.
Warren R. Eddy
Information Services Manager
National Tube Form, LLC
An Excaliber Company
e-mail -
Warren.Eddy@...
phone - 219 478-2363 ext 217
fax - 219 478-1043
-----Original Message-----
From: Wendy Bowen (Pursche
[mailto:
wpursche@...]
Sent: Friday, January 12, 2001 10:01 AM
To: Vantage egroups list
Subject: [Vantage] Crystal Reports v8.0
Hi everyone! I'm going to purchase the new Crystal Reports v8.0 for the
eManufacturing upgrade. Do I need the Standard, Professional, or
Developer's edition? Currently, I have the standard edition for
customizing. I'm assuming that the Standard 8.0 is the same?
Wendy Bowen (Pursche)
Network Administrator
Schmald Tool & Die, Inc.
(810) 743-1600 ext.323
wpursche@...
[Non-text portions of this message have been removed]
We no longer allow attachments to files. To access/share Report Files,
please go to the following link:
http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)
Warren,
Standard and Professional are both single user licenses. Standard works
fine for modifying the custom reports in Vantage. If you want to do reports
directly from the Progress database via ODBC, you need the Professional
version. ODBC access isn't available in the Standard Version. I'm not sure
what else they added in the Developer version.
Christopher Gitzlaff
Manager - Information Systems & Technology
Major Industries, Inc.
715.842.4616
cgitzlaff@...
-----Original Message-----
From: Eddy, Warren [mailto:
warren.eddy@...]
Sent: Friday, January 12, 2001 9:13 AM
To: '
vantage@egroups.com'
Subject: RE: [Vantage] Crystal Reports v8.0
Wendy;
When I bought (not using yet) CR v8.0, I was told, the differences between
the 3 are:
Standard is single user
Professional I believe gives you 5 licenses and more functionality
Developer Provides the greatest functionality, more
programming and the multiple users
This isn't necessarily total fact but the best that I have. We have found
the best pricing from a mail order place called Programmers Paradise. Web
site is programmersparadise.com.
Warren R. Eddy
Information Services Manager
National Tube Form, LLC
An Excaliber Company
e-mail -
Warren.Eddy@...
phone - 219 478-2363 ext 217
fax - 219 478-1043
-----Original Message-----
From: Wendy Bowen (Pursche
[mailto:
wpursche@...]
Sent: Friday, January 12, 2001 10:01 AM
To: Vantage egroups list
Subject: [Vantage] Crystal Reports v8.0
Hi everyone! I'm going to purchase the new Crystal Reports v8.0 for the
eManufacturing upgrade. Do I need the Standard, Professional, or
Developer's edition? Currently, I have the standard edition for
customizing. I'm assuming that the Standard 8.0 is the same?
Wendy Bowen (Pursche)
Network Administrator
Schmald Tool & Die, Inc.
(810) 743-1600 ext.323
wpursche@...
[Non-text portions of this message have been removed]
We no longer allow attachments to files. To access/share Report Files,
please go to the following link:
http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)
We no longer allow attachments to files. To access/share Report Files,
please go to the following link:
http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)
The Pro version works peachy...in an apples-to-oranges sort of way.
Rick Gors
MR/MMIS
Osco
"Wendy Bowen (Pursche)" wrote:
>
> Hi everyone! I'm going to purchase the new Crystal Reports v8.0 for the eManufacturing upgrade. Do I need the Standard, Professional, or Developer's edition? Currently, I have the standard edition for customizing. I'm assuming that the Standard 8.0 is the same?
>
> Wendy Bowen (Pursche)
> Network Administrator
> Schmald Tool & Die, Inc.
> (810) 743-1600 ext.323
> wpursche@...
>
> [Non-text portions of this message have been removed]
>
> We no longer allow attachments to files. To access/share Report Files, please go to the following link: http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time you try it, go to www.egroups.com, login and be sure to save your password, choose My Groups, choose Vantage, then choose Files. If you save the password, the link above will work the next time you try it.)
Hmmm, it looks like we will just get the standard again. I would like to
get the Professional so we could integrate the Progress ODBC driver but I
know I have to end up getting the cheaper version anyway!
Thanks!
Wendy Bowen (Pursche)
Network Administrator
Schmald Tool & Die, Inc.
(810) 743-1600 ext.323
wpursche@...
----- Original Message -----
From: Gitzlaff, Christopher <cgitzlaff@...>
To: <vantage@egroups.com>
Sent: Friday, January 12, 2001 10:22 AM
Subject: RE: [Vantage] Crystal Reports v8.0
> Warren,
>
> Standard and Professional are both single user licenses. Standard works
> fine for modifying the custom reports in Vantage. If you want to do
reports
> directly from the Progress database via ODBC, you need the Professional
> version. ODBC access isn't available in the Standard Version. I'm not
sure
> what else they added in the Developer version.
>
> Christopher Gitzlaff
> Manager - Information Systems & Technology
> Major Industries, Inc.
> 715.842.4616
> cgitzlaff@...
>
>
> -----Original Message-----
> From: Eddy, Warren [mailto:warren.eddy@...]
> Sent: Friday, January 12, 2001 9:13 AM
> To: 'vantage@egroups.com'
> Subject: RE: [Vantage] Crystal Reports v8.0
>
>
> Wendy;
>
> When I bought (not using yet) CR v8.0, I was told, the differences between
> the 3 are:
>
> Standard is single user
>
> Professional I believe gives you 5 licenses and more functionality
>
> Developer Provides the greatest functionality, more
> programming and the multiple users
>
>
>
> This isn't necessarily total fact but the best that I have. We have found
> the best pricing from a mail order place called Programmers Paradise. Web
> site is programmersparadise.com.
>
>
>
> Warren R. Eddy
>
> Information Services Manager
>
> National Tube Form, LLC
>
> An Excaliber Company
>
> e-mail - Warren.Eddy@...
>
> phone - 219 478-2363 ext 217
>
> fax - 219 478-1043
>
>
>
>
>
>
>
> -----Original Message-----
> From: Wendy Bowen (Pursche
>
> [mailto:wpursche@...]
> Sent: Friday, January 12, 2001 10:01 AM
> To: Vantage egroups list
> Subject: [Vantage] Crystal Reports v8.0
>
>
> Hi everyone! I'm going to purchase the new Crystal Reports v8.0 for the
> eManufacturing upgrade. Do I need the Standard, Professional, or
> Developer's edition? Currently, I have the standard edition for
> customizing. I'm assuming that the Standard 8.0 is the same?
>
>
>
> Wendy Bowen (Pursche)
>
> Network Administrator
>
> Schmald Tool & Die, Inc.
>
> (810) 743-1600 ext.323
>
> wpursche@...
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> We no longer allow attachments to files. To access/share Report Files,
> please go to the following link: http://www.egroups.com/files/vantage/
>
> (Note: If this link does not work for you the first time you try it, go
to
> www.egroups.com, login and be sure to save your password, choose My
Groups,
> choose Vantage, then choose Files. If you save the password, the link
above
> will work the next time you try it.)
>
>
> We no longer allow attachments to files. To access/share Report Files,
> please go to the following link: http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time you try it, go
to
> www.egroups.com, login and be sure to save your password, choose My
Groups,
> choose Vantage, then choose Files. If you save the password, the link
above
> will work the next time you try it.)
>
> We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time you try it, go
to www.egroups.com, login and be sure to save your password, choose My
Groups, choose Vantage, then choose Files. If you save the password, the
link above will work the next time you try it.)
We ugraded to 8 professional by choice, but no one said it was essential
Sophie
> -----Original Message-----
> From: Wendy Bowen (Pursche) [SMTP:wpursche@...]
> Sent: 12 January 2001 15:01
> To: Vantage egroups list
> Subject: [Vantage] Crystal Reports v8.0
>
> Hi everyone! I'm going to purchase the new Crystal Reports v8.0 for
> the eManufacturing upgrade. Do I need the Standard, Professional, or
> Developer's edition? Currently, I have the standard edition for
> customizing. I'm assuming that the Standard 8.0 is the same?
>
> Wendy Bowen (Pursche)
> Network Administrator
> Schmald Tool & Die, Inc.
> (810) 743-1600 ext.323
> wpursche@...
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> eGroups Sponsor
> Click Here!
> <http://rd.yahoo.com/M=169066.1281467.2883016.2/D=egroupmail/S=1700007
> 183:N/A=560434/*http://cgi.timeinc.net/cgi-bin/magsubs/cc/subs/ecompan
> ynowcc1?EFFORTKEY=ECAAQQ1>
>
> We no longer allow attachments to files. To access/share Report
> Files, please go to the following link:Â
> <http://www.egroups.com/files/vantage/>
> (Note:Â If this link does not work for you the first time you try it,
> go to www.egroups.com, login and be sure to save your password, choose
> My Groups, choose Vantage, then choose Files. If you save the
> password, the link above will work the next time you try it.)
>
If you plan to customize reports much, you'll want the Professional version. It also includes the Web Component Server for giving people better access to reports, but that part needs a separate machine.
You can do some powerful things with Crystal Professional, though.
Troy Funte
Liberty Electronics
----- Original Message -----
From: Wendy Bowen (Pursche)
To: vantage@egroups.com
Sent: Friday, January 12, 2001 7:24 AM
Subject: Re: [Vantage] Crystal Reports v8.0
Hmmm, it looks like we will just get the standard again. I would like to
get the Professional so we could integrate the Progress ODBC driver but I
know I have to end up getting the cheaper version anyway!
Thanks!
Wendy Bowen (Pursche)
Network Administrator
Schmald Tool & Die, Inc.
(810) 743-1600 ext.323
wpursche@...
----- Original Message -----
From: Gitzlaff, Christopher <cgitzlaff@...>
To: <vantage@egroups.com>
Sent: Friday, January 12, 2001 10:22 AM
Subject: RE: [Vantage] Crystal Reports v8.0
> Warren,
>
> Standard and Professional are both single user licenses. Standard works
> fine for modifying the custom reports in Vantage. If you want to do
reports
> directly from the Progress database via ODBC, you need the Professional
> version. ODBC access isn't available in the Standard Version. I'm not
sure
> what else they added in the Developer version.
>
> Christopher Gitzlaff
> Manager - Information Systems & Technology
> Major Industries, Inc.
> 715.842.4616
> cgitzlaff@...
>
>
> -----Original Message-----
> From: Eddy, Warren [mailto:warren.eddy@...]
> Sent: Friday, January 12, 2001 9:13 AM
> To: 'vantage@egroups.com'
> Subject: RE: [Vantage] Crystal Reports v8.0
>
>
> Wendy;
>
> When I bought (not using yet) CR v8.0, I was told, the differences between
> the 3 are:
>
> Standard is single user
>
> Professional I believe gives you 5 licenses and more functionality
>
> Developer Provides the greatest functionality, more
> programming and the multiple users
>
>
>
> This isn't necessarily total fact but the best that I have. We have found
> the best pricing from a mail order place called Programmers Paradise. Web
> site is programmersparadise.com.
>
>
>
> Warren R. Eddy
>
> Information Services Manager
>
> National Tube Form, LLC
>
> An Excaliber Company
>
> e-mail - Warren.Eddy@...
>
> phone - 219 478-2363 ext 217
>
> fax - 219 478-1043
>
>
>
>
>
>
>
> -----Original Message-----
> From: Wendy Bowen (Pursche
>
> [mailto:wpursche@...]
> Sent: Friday, January 12, 2001 10:01 AM
> To: Vantage egroups list
> Subject: [Vantage] Crystal Reports v8.0
>
>
> Hi everyone! I'm going to purchase the new Crystal Reports v8.0 for the
> eManufacturing upgrade. Do I need the Standard, Professional, or
> Developer's edition? Currently, I have the standard edition for
> customizing. I'm assuming that the Standard 8.0 is the same?
>
>
>
> Wendy Bowen (Pursche)
>
> Network Administrator
>
> Schmald Tool & Die, Inc.
>
> (810) 743-1600 ext.323
>
> wpursche@...
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> We no longer allow attachments to files. To access/share Report Files,
> please go to the following link: http://www.egroups.com/files/vantage/
>
> (Note: If this link does not work for you the first time you try it, go
to
> www.egroups.com, login and be sure to save your password, choose My
Groups,
> choose Vantage, then choose Files. If you save the password, the link
above
> will work the next time you try it.)
>
>
> We no longer allow attachments to files. To access/share Report Files,
> please go to the following link: http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time you try it, go
to
> www.egroups.com, login and be sure to save your password, choose My
Groups,
> choose Vantage, then choose Files. If you save the password, the link
above
> will work the next time you try it.)
>
> We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time you try it, go
to www.egroups.com, login and be sure to save your password, choose My
Groups, choose Vantage, then choose Files. If you save the password, the
link above will work the next time you try it.)
eGroups Sponsor
We no longer allow attachments to files. To access/share Report Files, please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to www.egroups.com, login and be sure to save your password, choose My Groups, choose Vantage, then choose Files. If you save the password, the link above will work the next time you try it.)
[Non-text portions of this message have been removed]
In preparation for eMfg, we just upgraded ours to version 8,
and got the professional version. The upgrade price is
about $155 from Insight.com. I'm sure it's probably
similar from other suppliers. For the upgrade price difference,
you may just want to look at getting the Professional to have
features you may want in the future.
Tim Care
Electro Chemical Finishing
----- Original Message -----
From: "Wendy Bowen (Pursche)" <wpursche@...>
To: "Vantage egroups list" <vantage@egroups.com>
Sent: Friday, January 12, 2001 10:00 AM
Subject: [Vantage] Crystal Reports v8.0
> Hi everyone! I'm going to purchase the new Crystal Reports v8.0 for the
eManufacturing upgrade. Do I need the Standard, Professional, or
Developer's edition? Currently, I have the standard edition for
customizing. I'm assuming that the Standard 8.0 is the same?
>
> Wendy Bowen (Pursche)
> Network Administrator
> Schmald Tool & Die, Inc.
> (810) 743-1600 ext.323
> wpursche@...
As a side note, YOU MUST HAVE CRYSTAL VERSION 8.0 TO CONVERT YOUR FILES FOR
THE CAIRO OR 5.0 RELEASE. If you do not use this version some of your files
will not work properly. I have already ran into this. My suggestion is to
buy the Professional version due to the web capabilities and ODBC
connectivity. The Developer's version will allow you to compile reports
right into custom applications.
Respectfully,
Mark Engemann
Business Application Manager
Hydromat, Inc. / Turmatic Systems
Voice: 314.432.4644
Fax: 314.692-9195
E-mail:
mengemann@... /
mengemann@...
-----Original Message-----
From: Tim Care [mailto:
ecfmis@...]
Sent: Friday, January 12, 2001 10:10 AM
To:
vantage@egroups.com
Subject: Re: [Vantage] Crystal Reports v8.0
In preparation for eMfg, we just upgraded ours to version 8,
and got the professional version. The upgrade price is
about $155 from Insight.com. I'm sure it's probably
similar from other suppliers. For the upgrade price difference,
you may just want to look at getting the Professional to have
features you may want in the future.
Tim Care
Electro Chemical Finishing
----- Original Message -----
From: "Wendy Bowen (Pursche)" <wpursche@...>
To: "Vantage egroups list" <vantage@egroups.com>
Sent: Friday, January 12, 2001 10:00 AM
Subject: [Vantage] Crystal Reports v8.0
> Hi everyone! I'm going to purchase the new Crystal Reports v8.0 for the
eManufacturing upgrade. Do I need the Standard, Professional, or
Developer's edition? Currently, I have the standard edition for
customizing. I'm assuming that the Standard 8.0 is the same?
>
> Wendy Bowen (Pursche)
> Network Administrator
> Schmald Tool & Die, Inc.
> (810) 743-1600 ext.323
> wpursche@...
We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)
Hey Mark,
In reading the installation manual for the 5.0 upgrade it says that all
Crystal Reports for eMan were created with Crystal 7.0 not 8.0 as Egroups
keeps implying. In fact, it states that if you use 8.0 you will need to
save them as 7.0 format.
Is this an error? If so has anyone told Epicor? Or did I miss this
announcement somewhere....
Thanks
Darren Mann
Miller Products Co.
> -----Original Message-----
> From: Engemann, Mark [mailto:mengemann@...]
> Sent: Friday, January 12, 2001 12:53 PM
> To: 'vantage@egroups.com'
> Subject: RE: [Vantage] Crystal Reports v8.0
>
>
> As a side note, YOU MUST HAVE CRYSTAL VERSION 8.0 TO CONVERT
> YOUR FILES FOR
> THE CAIRO OR 5.0 RELEASE. If you do not use this version
> some of your files
> will not work properly. I have already ran into this. My
> suggestion is to
> buy the Professional version due to the web capabilities and ODBC
> connectivity. The Developer's version will allow you to
> compile reports
> right into custom applications.
>
> Respectfully,
>
> Mark Engemann
> Business Application Manager
> Hydromat, Inc. / Turmatic Systems
> Voice: 314.432.4644
> Fax: 314.692-9195
> E-mail: mengemann@... / mengemann@...
>
>
> -----Original Message-----
> From: Tim Care [mailto:ecfmis@...]
> Sent: Friday, January 12, 2001 10:10 AM
> To: vantage@egroups.com
> Subject: Re: [Vantage] Crystal Reports v8.0
>
>
> In preparation for eMfg, we just upgraded ours to version 8,
> and got the professional version. The upgrade price is
> about $155 from Insight.com. I'm sure it's probably
> similar from other suppliers. For the upgrade price difference,
> you may just want to look at getting the Professional to have
> features you may want in the future.
>
> Tim Care
> Electro Chemical Finishing
>
> ----- Original Message -----
> From: "Wendy Bowen (Pursche)" <wpursche@...>
> To: "Vantage egroups list" <vantage@egroups.com>
> Sent: Friday, January 12, 2001 10:00 AM
> Subject: [Vantage] Crystal Reports v8.0
>
>
> > Hi everyone! I'm going to purchase the new Crystal Reports
> v8.0 for the
> eManufacturing upgrade. Do I need the Standard, Professional, or
> Developer's edition? Currently, I have the standard edition for
> customizing. I'm assuming that the Standard 8.0 is the same?
> >
> > Wendy Bowen (Pursche)
> > Network Administrator
> > Schmald Tool & Die, Inc.
> > (810) 743-1600 ext.323
> > wpursche@...
>
>
>
> We no longer allow attachments to files. To access/share
> Report Files,
> please go to the following link:
> http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time you
> try it, go to
> www.egroups.com, login and be sure to save your password,
> choose My Groups,
> choose Vantage, then choose Files. If you save the password,
> the link above
> will work the next time you try it.)
>
> We no longer allow attachments to files. To access/share
> Report Files, please go to the following link:
> http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time you
> try it, go to www.egroups.com, login and be sure to save your
> password, choose My Groups, choose Vantage, then choose
> Files. If you save the password, the link above will work
> the next time you try it.)
>
>
Mark & All;
I tried to purchase v7 last summer and was told by Seagate and most
suppliers that v8 is what is available. E-man does indicate v7 is what they
are using so far as I know.
Warren R. Eddy
Information Services Manager
National Tube Form, LLC
An Excaliber Company
e-mail -
Warren.Eddy@...
phone - 219 478-2363 ext 217
fax - 219 478-1043
-----Original Message-----
From: Darren Mann [mailto:
dmann@...]
Sent: Sunday, January 14, 2001 8:40 PM
To:
vantage@egroups.com
Subject: RE: [Vantage] Crystal Reports v8.0
Hey Mark,
In reading the installation manual for the 5.0 upgrade it says that all
Crystal Reports for eMan were created with Crystal 7.0 not 8.0 as Egroups
keeps implying. In fact, it states that if you use 8.0 you will need to
save them as 7.0 format.
Is this an error? If so has anyone told Epicor? Or did I miss this
announcement somewhere....
Thanks
Darren Mann
Miller Products Co.
> -----Original Message-----
> From: Engemann, Mark [mailto:mengemann@...]
> Sent: Friday, January 12, 2001 12:53 PM
> To: 'vantage@egroups.com'
> Subject: RE: [Vantage] Crystal Reports v8.0
>
>
> As a side note, YOU MUST HAVE CRYSTAL VERSION 8.0 TO CONVERT
> YOUR FILES FOR
> THE CAIRO OR 5.0 RELEASE. If you do not use this version
> some of your files
> will not work properly. I have already ran into this. My
> suggestion is to
> buy the Professional version due to the web capabilities and ODBC
> connectivity. The Developer's version will allow you to
> compile reports
> right into custom applications.
>
> Respectfully,
>
> Mark Engemann
> Business Application Manager
> Hydromat, Inc. / Turmatic Systems
> Voice: 314.432.4644
> Fax: 314.692-9195
> E-mail: mengemann@... / mengemann@...
>
>
> -----Original Message-----
> From: Tim Care [mailto:ecfmis@...]
> Sent: Friday, January 12, 2001 10:10 AM
> To: vantage@egroups.com
> Subject: Re: [Vantage] Crystal Reports v8.0
>
>
> In preparation for eMfg, we just upgraded ours to version 8,
> and got the professional version. The upgrade price is
> about $155 from Insight.com. I'm sure it's probably
> similar from other suppliers. For the upgrade price difference,
> you may just want to look at getting the Professional to have
> features you may want in the future.
>
> Tim Care
> Electro Chemical Finishing
>
> ----- Original Message -----
> From: "Wendy Bowen (Pursche)" <wpursche@...>
> To: "Vantage egroups list" <vantage@egroups.com>
> Sent: Friday, January 12, 2001 10:00 AM
> Subject: [Vantage] Crystal Reports v8.0
>
>
> > Hi everyone! I'm going to purchase the new Crystal Reports
> v8.0 for the
> eManufacturing upgrade. Do I need the Standard, Professional, or
> Developer's edition? Currently, I have the standard edition for
> customizing. I'm assuming that the Standard 8.0 is the same?
> >
> > Wendy Bowen (Pursche)
> > Network Administrator
> > Schmald Tool & Die, Inc.
> > (810) 743-1600 ext.323
> > wpursche@...
>
>
>
> We no longer allow attachments to files. To access/share
> Report Files,
> please go to the following link:
> http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time you
> try it, go to
> www.egroups.com, login and be sure to save your password,
> choose My Groups,
> choose Vantage, then choose Files. If you save the password,
> the link above
> will work the next time you try it.)
>
> We no longer allow attachments to files. To access/share
> Report Files, please go to the following link:
> http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time you
> try it, go to www.egroups.com, login and be sure to save your
> password, choose My Groups, choose Vantage, then choose
> Files. If you save the password, the link above will work
> the next time you try it.)
>
>
We no longer allow attachments to files. To access/share Report Files,
please go to the following link:
http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)
I have loaded crystal 8.0 professional and have discovered I can no longer
compile executable reports. Is that so or am I over looking something.
-----Original Message-----
From: Engemann, Mark [mailto:
mengemann@...]
Sent: Friday, January 12, 2001 12:53 PM
To: '
vantage@egroups.com'
Subject: RE: [Vantage] Crystal Reports v8.0
As a side note, YOU MUST HAVE CRYSTAL VERSION 8.0 TO CONVERT YOUR FILES FOR
THE CAIRO OR 5.0 RELEASE. If you do not use this version some of your files
will not work properly. I have already ran into this. My suggestion is to
buy the Professional version due to the web capabilities and ODBC
connectivity. The Developer's version will allow you to compile reports
right into custom applications.
Respectfully,
Mark Engemann
Business Application Manager
Hydromat, Inc. / Turmatic Systems
Voice: 314.432.4644
Fax: 314.692-9195
E-mail:
mengemann@... /
mengemann@...
-----Original Message-----
From: Tim Care [mailto:
ecfmis@...]
Sent: Friday, January 12, 2001 10:10 AM
To:
vantage@egroups.com
Subject: Re: [Vantage] Crystal Reports v8.0
In preparation for eMfg, we just upgraded ours to version 8,
and got the professional version. The upgrade price is
about $155 from Insight.com. I'm sure it's probably
similar from other suppliers. For the upgrade price difference,
you may just want to look at getting the Professional to have
features you may want in the future.
Tim Care
Electro Chemical Finishing
----- Original Message -----
From: "Wendy Bowen (Pursche)" <wpursche@...>
To: "Vantage egroups list" <vantage@egroups.com>
Sent: Friday, January 12, 2001 10:00 AM
Subject: [Vantage] Crystal Reports v8.0
> Hi everyone! I'm going to purchase the new Crystal Reports v8.0 for the
eManufacturing upgrade. Do I need the Standard, Professional, or
Developer's edition? Currently, I have the standard edition for
customizing. I'm assuming that the Standard 8.0 is the same?
>
> Wendy Bowen (Pursche)
> Network Administrator
> Schmald Tool & Die, Inc.
> (810) 743-1600 ext.323
> wpursche@...
They are phasing this out in favor of web distribution but you can still get
a download to add to v8.0 from the Seagate web site for free.
-Todd C.
-----Original Message-----
From: Reilly, Rhonda [mailto:
rreilly@...]
Sent: Tuesday, January 16, 2001 9:42 AM
To:
vantage@egroups.com
Subject: RE: [Vantage] Crystal Reports v8.0
I have loaded crystal 8.0 professional and have discovered I can no longer
compile executable reports. Is that so or am I over looking something.
-----Original Message-----
From: Engemann, Mark [mailto:
mengemann@...]
Sent: Friday, January 12, 2001 12:53 PM
To: '
vantage@egroups.com'
Subject: RE: [Vantage] Crystal Reports v8.0
As a side note, YOU MUST HAVE CRYSTAL VERSION 8.0 TO CONVERT YOUR FILES FOR
THE CAIRO OR 5.0 RELEASE. If you do not use this version some of your files
will not work properly. I have already ran into this. My suggestion is to
buy the Professional version due to the web capabilities and ODBC
connectivity. The Developer's version will allow you to compile reports
right into custom applications.
Respectfully,
Mark Engemann
Business Application Manager
Hydromat, Inc. / Turmatic Systems
Voice: 314.432.4644
Fax: 314.692-9195
E-mail:
mengemann@... /
mengemann@...
-----Original Message-----
From: Tim Care [mailto:
ecfmis@...]
Sent: Friday, January 12, 2001 10:10 AM
To:
vantage@egroups.com
Subject: Re: [Vantage] Crystal Reports v8.0
In preparation for eMfg, we just upgraded ours to version 8,
and got the professional version. The upgrade price is
about $155 from Insight.com. I'm sure it's probably
similar from other suppliers. For the upgrade price difference,
you may just want to look at getting the Professional to have
features you may want in the future.
Tim Care
Electro Chemical Finishing
----- Original Message -----
From: "Wendy Bowen (Pursche)" <wpursche@...>
To: "Vantage egroups list" <vantage@egroups.com>
Sent: Friday, January 12, 2001 10:00 AM
Subject: [Vantage] Crystal Reports v8.0
> Hi everyone! I'm going to purchase the new Crystal Reports v8.0 for the
eManufacturing upgrade. Do I need the Standard, Professional, or
Developer's edition? Currently, I have the standard edition for
customizing. I'm assuming that the Standard 8.0 is the same?
>
> Wendy Bowen (Pursche)
> Network Administrator
> Schmald Tool & Die, Inc.
> (810) 743-1600 ext.323
> wpursche@...
eGroups Sponsor
<http://rd.yahoo.com/M=169066.1281467.2883016.2/D=egroupmail/S=1700007183:N/
A=560429/*http://cgi.timeinc.net/cgi-bin/magsubs/cc/subs/ecompanynowcc1?EFFO
RTKEY=ECAAQN7> Click Here!
To unsubscribe from this group, send an email to:
vantage-unsubscribe@egroups.com
[Non-text portions of this message have been removed]
Seagate has a free download to compile the reports on their website. It works just like in version 7 once it is installed.
Good thing, or we'd be somewhat stuck.
Troy Funte
Liberty Electronics
----- Original Message -----
From: Reilly, Rhonda
To: vantage@egroups.com
Sent: Tuesday, January 16, 2001 10:41 AM
Subject: RE: [Vantage] Crystal Reports v8.0
I have loaded crystal 8.0 professional and have discovered I can no longer
compile executable reports. Is that so or am I over looking something.
-----Original Message-----
From: Engemann, Mark [mailto:mengemann@...]
Sent: Friday, January 12, 2001 12:53 PM
To: 'vantage@egroups.com'
Subject: RE: [Vantage] Crystal Reports v8.0
As a side note, YOU MUST HAVE CRYSTAL VERSION 8.0 TO CONVERT YOUR FILES FOR
THE CAIRO OR 5.0 RELEASE. If you do not use this version some of your files
will not work properly. I have already ran into this. My suggestion is to
buy the Professional version due to the web capabilities and ODBC
connectivity. The Developer's version will allow you to compile reports
right into custom applications.
Respectfully,
Mark Engemann
Business Application Manager
Hydromat, Inc. / Turmatic Systems
Voice: 314.432.4644
Fax: 314.692-9195
E-mail: mengemann@... / mengemann@...
-----Original Message-----
From: Tim Care [mailto:ecfmis@...]
Sent: Friday, January 12, 2001 10:10 AM
To: vantage@egroups.com
Subject: Re: [Vantage] Crystal Reports v8.0
In preparation for eMfg, we just upgraded ours to version 8,
and got the professional version. The upgrade price is
about $155 from Insight.com. I'm sure it's probably
similar from other suppliers. For the upgrade price difference,
you may just want to look at getting the Professional to have
features you may want in the future.
Tim Care
Electro Chemical Finishing
----- Original Message -----
From: "Wendy Bowen (Pursche)" <wpursche@...>
To: "Vantage egroups list" <vantage@egroups.com>
Sent: Friday, January 12, 2001 10:00 AM
Subject: [Vantage] Crystal Reports v8.0
> Hi everyone! I'm going to purchase the new Crystal Reports v8.0 for the
eManufacturing upgrade. Do I need the Standard, Professional, or
Developer's edition? Currently, I have the standard edition for
customizing. I'm assuming that the Standard 8.0 is the same?
>
> Wendy Bowen (Pursche)
> Network Administrator
> Schmald Tool & Die, Inc.
> (810) 743-1600 ext.323
> wpursche@...
eGroups Sponsor
To unsubscribe from this group, send an email to:
vantage-unsubscribe@egroups.com
[Non-text portions of this message have been removed]