# Zero Balance A/P Invoice **Category:** [Yahoo Archive](https://www.epiusers.help/c/yahoo-archive/9) **Created:** 2000-07-20 09:15 UTC **Views:** 7719 **Replies:** 289 **URL:** https://www.epiusers.help/t/zero-balance-a-p-invoice/504 --- ## Post #1 by @system
We do alot of Zero Balance P.O.'s for tracking our returns. This way
are shipping/receiving is able to receive them in and we have a easy way
of tracking. Our Vendor 99% of the time sends us a zero balance
invoice for that part also. In 3.0 we entered the invoice in. But
Tuesday we went to 4.0, now we get an error not allowed a zero balance?

Anyone have any suggestions?

TIA.
Dina
Vamco International, Inc.
--- ## Post #2 by @system
Dina,

I don't think there is any financial function you can do in 4.0 with a zero
balance.

Eric

Continental Industries Inc. Maker of Solid State Relays.
5456 E. McDowell Rd.
Mesa, Az. 85215
(480)985-7800 Ext. 217


We do alot of Zero Balance P.O.'s for tracking our returns. This way
are shipping/receiving is able to receive them in and we have a easy way
of tracking. Our Vendor 99% of the time sends us a zero balance
invoice for that part also. In 3.0 we entered the invoice in. But
Tuesday we went to 4.0, now we get an error not allowed a zero balance?

Anyone have any suggestions?
--- ## Post #3 by @system
Please say this isn't so. This is really disturbing news for us as we face
4.0 later this month. We treat customer furnished material as if it was
purchased, going thru all the same steps, which of course necessitates
creating a zero $ invoice to clear the receipt. Sounds like workaround
time.
ARGHHHH!
Deb @ Reeder & Kline Machine Company

RE:
I don't think there is any financial function you can do in 4.0 with a zero
balance.

Eric

We do alot of Zero Balance P.O.'s for tracking our returns. This way
are shipping/receiving is able to receive them in and we have a easy way
of tracking. Our Vendor 99% of the time sends us a zero balance
invoice for that part also. In 3.0 we entered the invoice in. But
Tuesday we went to 4.0, now we get an error not allowed a zero balance?

Anyone have any suggestions?
Dina





[Non-text portions of this message have been removed]
--- ## Post #4 by @system
Does anyone know if you can create a zero dollar check? We track our
employee/salespeople commissions in AP and enter a credit memo in the amount
of the commissions paid through payroll and then do a zero dollar check to
remove the paid commissions and the offsetting credit.
--- ## Post #5 by @system
Eric,

How abot A/R?

Eric Tolliver wrote:

> Dina,
>
> I don't think there is any financial function you can do in 4.0 with a zero
> balance.
>
> Eric
>
> Continental Industries Inc. Maker of Solid State Relays.
> 5456 E. McDowell Rd.
> Mesa, Az. 85215
> (480)985-7800 Ext. 217
>
> We do alot of Zero Balance P.O.'s for tracking our returns. This way
> are shipping/receiving is able to receive them in and we have a easy way
> of tracking. Our Vendor 99% of the time sends us a zero balance
> invoice for that part also. In 3.0 we entered the invoice in. But
> Tuesday we went to 4.0, now we get an error not allowed a zero balance?
>
> Anyone have any suggestions?
>
> ------------------------------------------------------------------------
> Find long lost high school friends:
> http://click.egroups.com/1/7080/13/_/411782/_/964102874/
> ------------------------------------------------------------------------
>
> We no longer allow attachments to files. To access/share Report Files, please go to the following link: http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time you try it, go to www.egroups.com, login and be sure to save your password, choose My Groups, choose Vantage, then choose Files. If you save the password, the link above will work the next time you try it.)
--- ## Post #6 by @system
Deb,

Yes, I tried everything I can think of. We also do the same thing for our customer who supply materials. (BTW - an Epicor Rep. Suggestion). I do not know away around this either. Any idea's??

Thanks,
Dina

"Wilmoth, Deb" wrote:

> Please say this isn't so. This is really disturbing news for us as we face
> 4.0 later this month. We treat customer furnished material as if it was
> purchased, going thru all the same steps, which of course necessitates
> creating a zero $ invoice to clear the receipt. Sounds like workaround
> time.
> ARGHHHH!
> Deb @ Reeder & Kline Machine Company
>
> RE:
> I don't think there is any financial function you can do in 4.0 with a zero
> balance.
>
> Eric
>
> We do alot of Zero Balance P.O.'s for tracking our returns. This way
> are shipping/receiving is able to receive them in and we have a easy way
> of tracking. Our Vendor 99% of the time sends us a zero balance
> invoice for that part also. In 3.0 we entered the invoice in. But
> Tuesday we went to 4.0, now we get an error not allowed a zero balance?
>
> Anyone have any suggestions?
> Dina
>
> [Non-text portions of this message have been removed]
>
>
--- ## Post #7 by @system
Eric,

In A/R you are able to create a zero balance invoice.

Thanks,
Dina

Eric Tolliver wrote:

> Dina,
>
> I don't think there is any financial function you can do in 4.0 with a zero
> balance.
>
> Eric
>
> Continental Industries Inc. Maker of Solid State Relays.
> 5456 E. McDowell Rd.
> Mesa, Az. 85215
> (480)985-7800 Ext. 217
>
> We do alot of Zero Balance P.O.'s for tracking our returns. This way
> are shipping/receiving is able to receive them in and we have a easy way
> of tracking. Our Vendor 99% of the time sends us a zero balance
> invoice for that part also. In 3.0 we entered the invoice in. But
> Tuesday we went to 4.0, now we get an error not allowed a zero balance?
>
>
--- ## Post #8 by @system
I haven't taken the time in the midst of our year end to experiment in our
test company - However, our Purchasing manager suggested resorting to .0001
PO's which rounds to $ in invoice format but she wasn't able to resurrect
our test company after a power failure on Wednesday. (Road construction
struck Indy again and someone managed to cut the main powerline to the area
resulting in no electricity for about two hours. I haven't heard that we
lost any data though! The last time there was a big problem with road
construction, a gas line was cut resulting in a very impressive explosion
which killed one woman, blew up some houses and melted others. We count
ourselves lucky having only minor computer inconveniences.)

Deb

Dina wrote:
Yes, I tried everything I can think of. We also do the same thing for our
customer who supply materials. (BTW - an Epicor Rep. Suggestion). I do not
know away around this either. Any idea's??


Deb wrote:
We treat customer furnished material as if it was purchased, going thru all
the same steps, which of course necessitates creating a zero $ invoice to
clear the receipt.


[Non-text portions of this message have been removed]
--- ## Post #9 by @system
Deb,
"our Purchasing manager suggested resorting to .0001"

It only allows you to go to .01. So I believe you workaround will not work. I am testing the Payment Adjustment Entry now to see how that works. If I enter the Invoice at .01, then use payment adjustment. I am not sure how it will effect my g/l for inventory I
will let you know.

I did get a document # from Vantage for a fix. 3401MPS. Please respond to have this fixed hopefully in a patch and not in CAIRO.

Thanks,
Dina

P.S. I never thought I would be glad to live in Pittsburgh.
--- ## Post #10 by @system
At 03:13 PM 7/20/2000 , you wrote:
>"our Purchasing manager suggested resorting to .0001"
> >>>>
>It only allows you to go to .01. So I believe you workaround will not
>work. I am

You can make the price/unit each, 100, or 1000. Try $0.001 per 1000.

-WC
--- ## Post #11 by @system
We also do quite a bit of work using material consigned by our
customers. At present we do not 'receive' the customers material into
Vantage. We are looking for a process where we can have an audit
trail of what the customer sent along with our normal order process
that shows what went out. Is anyone using a process other than
creating and receiving a PO? The PO process sounds good, but it
requires many extra steps.

To top it off, at times we need to return some of the customer
consigned material, and we would like to have a packing slip to
accompany it and for our records. Again, has anyone developed a
process to support these requirements.

Thanks

Gordon Marble

--- In vantage@egroups.com, "Wilmoth, Deb" <Deb@r...> wrote:
> Please say this isn't so. This is really disturbing news for us as
we face
> 4.0 later this month. We treat customer furnished material as if
it was
> purchased, going thru all the same steps, which of course
necessitates
> creating a zero $ invoice to clear the receipt. Sounds like
workaround
> time.
> ARGHHHH!
> Deb @ Reeder & Kline Machine Company
>
> RE:
> I don't think there is any financial function you can do in 4.0
with a zero
> balance.
>
> Eric
>
> We do alot of Zero Balance P.O.'s for tracking our returns. This
way
> are shipping/receiving is able to receive them in and we have a
easy way
> of tracking. Our Vendor 99% of the time sends us a zero balance
> invoice for that part also. In 3.0 we entered the invoice in. But
> Tuesday we went to 4.0, now we get an error not allowed a zero
balance?
>
> Anyone have any suggestions?
> Dina
--- ## Post #12 by @system
Wayne

> You can make the price/unit each, 100, or 1000. Try $0.001 per 1000.<

You are right for line detail, but you have to enter a Invoice Amount on the header screen, which will not let you enter .00001 or units of measure. So if you enter .0001 on the invoice line and .01 for invoice amount you end of with a variance of -.01 which I believe
is posted to g/l for a variance account.

I believe if you enter the .01 for invoice amount also for the line item. Then use payment adjustment Entry, this will work. I am still testing.

Dina


>
>
>
>
--- ## Post #13 by @system
We just converted to 4.00.811. Is there a source that shows in which tables
obsolete fields have been transferred? For example, I have reports that
reference the old field PrimBin which WAS in the table PartWhse. Is the
PrimBin referenced someplace else now? How can I find that? Thank you.

Amy MacKay
Parkinson Machinery
--- ## Post #14 by @system
>We just converted to 4.00.811. Is there a source that shows in which tables
>obsolete fields have been transferred? For example, I have reports that
>reference the old field PrimBin which WAS in the table PartWhse. Is the
>PrimBin referenced someplace else now? How can I find that? Thank you.
>
>Amy MacKay
>Parkinson Machinery

It is in the part plant table.

Anna Bookwalter
--- ## Post #15 by @system
Good point. In the future we will add a comment to the db description of
obsolete fields indicating if they have been moved or what.
In 4.0 many fields moved from the Part to the PartPlant. In your case the
PrimBin moved to the PlantWhse.

-----Original Message-----
From: Amy Mackay [mailto:amackay@...]
Sent: Friday, July 21, 2000 5:45 AM
To: vantage@egroups.com
Subject: [Vantage] Primary Bin table?

We just converted to 4.00.811. Is there a source that shows in which tables
obsolete fields have been transferred? For example, I have reports that
reference the old field PrimBin which WAS in the table PartWhse. Is the
PrimBin referenced someplace else now? How can I find that? Thank you.

Amy MacKay
Parkinson Machinery




------------------------------------------------------------------------
Find long lost high school friends:
http://click.egroups.com/1/7080/13/_/411782/_/964185605/
------------------------------------------------------------------------

We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)
--- ## Post #16 by @system
There is a way to do this in 3.0, we are not on 4.0 yet so I'm not sure what is available. In 3.0 go to Start\Programs\Progress\Database Administration

Database\Connect - connect to your DB.
Database\Reports\Quick Field
Type "All" (without the quotes).
Check "Show Hidden"
Click "OK"
Click "Print"
Send Output to: Select "File"
Type in File Destination and Filename. ex. x:\dir\filename.txt

Open this file with Word or Wordpad.

Now you can search for fields or tables.


Todd Anderson wrote:

> Amy,
>
> No on the first question - you have to hunt.
> PrimBin is now in PlantWhse table. It was moved as part of the upgrades to
> correctly support multiple plants.
>
> Todd Anderson
>
> We just converted to 4.00.811. Is there a source that shows in which tables
> obsolete fields have been transferred? For example, I have reports that
> reference the old field PrimBin which WAS in the table PartWhse. Is the
> PrimBin referenced someplace else now? How can I find that? Thank you.
>
> Amy MacKay
> Parkinson Machinery
--- ## Post #17 by @system
At 09:54 AM 7/21/2000 , you wrote:
>No on the first question - you have to hunt.
>PrimBin is now in PlantWhse table. It was moved as part of the upgrades to

Having a searchable copy of ALL the dictionaries is really handy for
finding stuff like this. You can run a Data Dictionary Report for all
tables, then print preview it. While you're still in the preview screen,
go to \VntgWork and grab a copy of the text file. Then you can open and
search it with word pad or your favorite text editor. I think someone
uploaded a PDF version of the same thing to EGroups, but I prefer plain
text anyways.

-Wayne
--- ## Post #18 by @system
I have a couple of concerns with a PO process:
1) Do I have to create a P/N for every item that is received? We have
many parts and get new parts on a weekly basis and some items are a
one-time use. We are a service provider that turns part around in a
couple of days. At this time it does not make sense to add a new work-
around.
2) I believe I can receive an item against a PO without a P/N, but at
the time of receipt i will not have a job to receive it against. i do
not want the receipt to go against an expensed g/l. Where do your
receipts go if you are not using a P/N?
3) How do you receive items that you are not expecting?

Gordon Marble

--- In vantage@egroups.com, Rubberasc@a... wrote:
> We recieve customer consigned materials also, what we do is create
a single po and use it for a year. Simply add a release line to the
existing po.

Shirley Graver
Sys Admin
Rubber Associates
--- ## Post #19 by @system
Is there any way to print a listing of all the reports in a report library?
Thanks.

Amy MacKay

-----Original Message-----
From: Wayne Cox [mailto:wmc@...]
Sent: Friday, July 21, 2000 10:47 AM
To: vantage@egroups.com
Subject: RE: [Vantage] Primary Bin table?


At 09:54 AM 7/21/2000 , you wrote:
>No on the first question - you have to hunt.
>PrimBin is now in PlantWhse table. It was moved as part of the upgrades to

Having a searchable copy of ALL the dictionaries is really handy for
finding stuff like this. You can run a Data Dictionary Report for all
tables, then print preview it. While you're still in the preview screen,
go to \VntgWork and grab a copy of the text file. Then you can open and
search it with word pad or your favorite text editor. I think someone
uploaded a PDF version of the same thing to EGroups, but I prefer plain
text anyways.

-Wayne


------------------------------------------------------------------------
Make new friends, find the old at Classmates.com:
http://click.egroups.com/1/7075/13/_/411782/_/964190984/
------------------------------------------------------------------------

We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)
--- ## Post #20 by @system
I hope it's still ok to post Vantage-related Job listings on this list. I
apoligize ahead of time if it's not. Thank you.

Amy MacKay

Engineering Aid

Manufacturer of capital equipment has immediate opening for an individual to
work as an Engineering Aid. Job will consist of data entry and management
in company-integrated software with opportunity for advancement. Background
in purchasing or drafting for general knowledge of mechanical parts is a
plus. Individual must be organized, able to work independently, and possess
good communication skills.

Submit resumes to:

Amy MacKay
Parkinson Machinery and Mfg Corp.
100 Goldstein Drive
Highland Industrial Park
Woonsocket, RI 02895
(Fax) 401-762-2295
E-mail: amackay@...
--- ## Post #21 by @system
I know I read before how to do this and thought I had saved it, but alas I
can't come up with it. We are trying to add the Customer name to a report
that is compiled from JobOper and JobAsmbl tables. We linked to the JobHead
table then to the OrdDtl to the OrdHead to the Customer. This gives us the
company name but it also duplicates each line of the report. What am I
doing wrong. We tried left outer joins but got the same results.

We are on 4.0

Kathy Hambleton
Electron Energy Corporation
--- ## Post #22 by @system
Simple question - How do you create a group footer band line?

Thanks in advance,

Dean
--- ## Post #23 by @system
Dean,

First you have to assign a Group. Go up to Database then Group Order(it is
also the blue, yellow and red icon if you have it on your toolbar) then
select New and choose which field you want to Group by. When this is done
you can Create a Band Line and choose different type open the pull down menu
and you will see the different types of lines available for either a header
or footer depending on your needs.

Jim Frice

> -----Original Message-----
> From: Dean Brown, Jr. [mailto:dbrownjr@...]
> Sent: Friday, August 18, 2000 9:58 AM
> To: vantage@egroups.com
> Subject: [Vantage] Report Builder
>
>
> Simple question - How do you create a group footer band line?
>
> Thanks in advance,
>
> Dean
>
--- ## Post #24 by @system
I am trying to write a report that will give me just the last
operation of a job that was clocked into. Something like:

Part Number Job Number Last Operation Worked

Any help would be appreciated.

Chuck Metcalf
--- ## Post #25 by @system
Can anyone tell me how to get report builder to include Advance Billing
amounts on the Sales by State report.
I have tried everything that I can think of and am getting nowhere. Any
help would be appreciated.


Marvin R. Myers
Computer Systems Engineer
marvin@...
717-252-3667 ext. 231
--- ## Post #26 by @system
I am working with the part bin report that is posted on the One List. I
can't seem to get
the report to print 0 on hand qty records. Does anyone know why this
happens. I know that
I am probably overlooking something simple.


Marvin R. Myers
Computer Systems Engineer
marvin@...
717-252-3667 ext. 231
--- ## Post #27 by @system
Marvin,
We just worked with Vantage support concerning the issue of receiving 0
onhand qty for another report and this was the response:
Unfortunately, a part number has to have a least 1 in its quantity to be
able to pull info for a report. Report cannot be run. Best way to simulate
is to run a report of all inventory, also run a report of inventory with
qtys on hand and compare the two.
Hope this helps! We thought we were over looking something simple also! If
anyone knows some way to get that answer, please pass it on.

Kimberly Maxwell
Westwood Precision, Inc.
PH: 425-347-1303 Ext. 41
Fax: 425-353-8945
email: kimberly.maxwell@...
www.westwoodprecision.com

-----Original Message-----
I am working with the part bin report that is posted on the One List. I
can't seem to get
the report to print 0 on hand qty records. Does anyone know why this
happens. I know that
I am probably overlooking something simple.


Marvin R. Myers
Computer Systems Engineer
marvin@...
717-252-3667 ext. 231
--- ## Post #28 by @system
If you start with the part table, and then join to
the Part Bin table with a left out join, you will
get all parts, whether or not they have an entry
in the Part Bin Table. The ones that do not
have a Part Bin record will have a ? for unknown
value. You can then set the unknown value to show
0 instead of ?.

Tim Care
Electro Chemical Finishing
----- Original Message -----
From: "Marvin Myers" <marvin@...>
To: <vantage@egroups.com>
Sent: Friday, September 22, 2000 10:14 AM
Subject: [Vantage] Report Builder


>
> I am working with the part bin report that is posted on the One List. I
> can't seem to get
> the report to print 0 on hand qty records. Does anyone know why this
> happens. I know that
> I am probably overlooking something simple.
>
>
> Marvin R. Myers
> Computer Systems Engineer
> marvin@...
> 717-252-3667 ext. 231
>
>
> We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time you try it, go
to www.egroups.com, login and be sure to save your password, choose My
Groups, choose Vantage, then choose Files. If you save the password, the
link above will work the next time you try it.)
>
--- ## Post #29 by @system
All you Report Builder Gurus out there - help! Help! Help!

I am trying to build a report sorted by SchedCode that lists all open jobs
(for stock and linked) that gives the following information:

JobNum ReqDueDate SchedCode OpenQty PartNum ExtPrice ExtCost Name

My problems are:

1. I get a separate line for each link in the Job. (I need one line per job
with a total open quantity.)
2. If the job is built to stock I get a ? in the ExtPrice, ExtCost, & Name
fields.
3. I am getting unreleased & non-engineered jobs even if I filter them out.

It seems as if I fix one problem two new ones crop up.

(Open Qty = JobProd.ProdQty - JobProd.ReceivedQty-JobProd.ShippedQty)


Thanks in advance.
Kathleen Harrington
SPS Non-Ferrous
Kharrington@...
--- ## Post #30 by @system
Not guru class but getting there. A couple ideas off top of head.
I have to make some assumptions about your links so I may be way off base.
But some things to consider anyway which might shed some light on the issues
-
for #1 - Is master table JOBPROD and then linked to relevant tables in a
chain (one to another) or all linked to JOBPROD?
The linking is probably the key to this issue
Try doing all reporting in a group footer and none in detail
#2 - the above may also reduce the unknowns and get data for the
to-stock releases
#3 - if the link is the issue (JOBPROD not master) it may also affect
the filter
A couple times I have found I needed the details section for agregation but
did not want it to print so I suppress it by creating a calculated field
called NoPrint and set it to always be false and in the section control to
print only when NoPrint is true. This helps things to add up for the footer
(my main report line) as each release is enountered but not have to print
anything. It should roll up the totals for the footer.
Hope this is some help or sparks an idea.

-Todd Caughey
Harvey Vogel Mfg. Co.
Woodbury, MN

-----Original Message-----
From: Kathleen Harrington [mailto:kharrington@...]
Sent: Friday, September 22, 2000 2:33 PM
To: VANTAGE@...
Subject: [Vantage] Report Builder



<http://click.egroups.com/1/8974/13/_/411782/_/969651248/>


<http://adimg.egroups.com/img/8974/13/_/411782/_/969651248/WarningCollectibl
es468x602E.gif>
<http://www.egroups.com/> eGroups My
<http://www.egroups.com/mygroups> Groups | vantage Main
<http://www.egroups.com/group/vantage> Page | Start a new
<http://click.egroups.com/1/8150/13/_/411782/_/969651249/> group!


All you Report Builder Gurus out there - help! Help! Help!

I am trying to build a report sorted by SchedCode that lists all open jobs
(for stock and linked) that gives the following information:

JobNum ReqDueDate SchedCode OpenQty PartNum
ExtPrice ExtCost Name

My problems are:

1. I get a separate line for each link in the Job. (I need one line per job
with a total open quantity.)
2. If the job is built to stock I get a ? in the ExtPrice, ExtCost, & Name
fields.
3. I am getting unreleased & non-engineered jobs even if I filter them out.

It seems as if I fix one problem two new ones crop up.

(Open Qty = JobProd.ProdQty - JobProd.ReceivedQty-JobProd.ShippedQty)


Thanks in advance.
Kathleen Harrington
SPS Non-Ferrous
Kharrington@...






We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
<http://www.egroups.com/files/vantage/>
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)




[Non-text portions of this message have been removed]
--- ## Post #31 by @system
Todd,

FTI: You can suppress the record lines on the report without doing the
calculation, by going to 'Properties','Record Layout', and checking off
'suppress all record lines'.

Sarah
--- ## Post #32 by @system
Had not seen that before. Does it still treat them as if they are being
processed and supressed or does it skip agregation? I have had some strange
totalling before. I might try a couple simple reports each way to confirm.
Certainly the properties method is easier than creating yet another
calculated field. BTW - sorry about Crystal cross over - s/b Records
section not Details.
Thanks,
-Todd

-----Original Message-----
From: sarah.vareschi@... [mailto:sarah.vareschi@...]
Sent: Friday, September 22, 2000 3:35 PM
To: vantage@egroups.com
Subject: RE: [Vantage] Report Builder



<http://click.egroups.com/1/9155/13/_/411782/_/969654207/>


<http://adimg.egroups.com/img/9155/13/_/411782/_/969654207/468x60_hate_searc
hing5.gif>
<http://www.egroups.com/> eGroups My
<http://www.egroups.com/mygroups> Groups | vantage Main
<http://www.egroups.com/group/vantage> Page | Start a new
<http://click.egroups.com/1/8150/13/_/411782/_/969654208/> group!


Todd,

FTI: You can suppress the record lines on the report without doing the
calculation, by going to 'Properties','Record Layout', and checking off
'suppress all record lines'.

Sarah

We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
<http://www.egroups.com/files/vantage/>
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)




[Non-text portions of this message have been removed]
--- ## Post #33 by @system
Todd,

It still treats them the same way, the totals all come out right, I use it
in lots of reports.

Sarah
--- ## Post #34 by @system
I am attempting to write a report in report builder. I have modified
an existing report and cannot get it to work. I have not had any
formal training and would like to talk to someone who has some
experience.
--- ## Post #35 by @system
Gary,

If you email me the report and explain the problem, I'll try to help you
out.

Sarah
--- ## Post #36 by @system
Does anyone have a report builder report that will show whether a job
made or lost money, based on sales price compared against actual
costs associated with a job such as such as labor, burden, material,
subcontracting.
Thanks
Chuck
--- ## Post #37 by @system
I will be uploading a job cost report to egroups, hopefully this is what u need.
The name of the file is Sales Vs Costs-Closed Jobs.Prl.
----- Original Message -----
From: Charles Metcalf
To: vantage@egroups.com
Sent: Wednesday, October 11, 2000 12:48 PM
Subject: [Vantage] Report Builder


Does anyone have a report builder report that will show whether a job
made or lost money, based on sales price compared against actual
costs associated with a job such as such as labor, burden, material,
subcontracting.
Thanks
Chuck


eGroups Sponsor


We no longer allow attachments to files. To access/share Report Files, please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to www.egroups.com, login and be sure to save your password, choose My Groups, choose Vantage, then choose Files. If you save the password, the link above will work the next time you try it.)



[Non-text portions of this message have been removed]
--- ## Post #38 by @system
Thank You
Chuck


I will be uploading a job cost report to egroups, hopefully this is what u
need.
The name of the file is Sales Vs Costs-Closed Jobs.Prl.
----- Original Message -----
From: Charles Metcalf
To: vantage@egroups.com
Sent: Wednesday, October 11, 2000 12:48 PM
Subject: [Vantage] Report Builder


Does anyone have a report builder report that will show whether a job
made or lost money, based on sales price compared against actual
costs associated with a job such as such as labor, burden, material,
subcontracting.
Thanks
Chuck


eGroups Sponsor
--- ## Post #39 by @system
Charles,

If you cannot upload the report for some reason, please send me a copy.

Thanks,
Steve

-----Original Message-----
From: Dennis Houghton [SMTP:dennis@...]
Sent: Thursday, October 12, 2000 9:16 AM
To: vantage@egroups.com
Subject: Re: [Vantage] Report Builder

I will be uploading a job cost report to egroups, hopefully this
is what u need.
The name of the file is Sales Vs Costs-Closed Jobs.Prl.
----- Original Message -----
From: Charles Metcalf
To: vantage@egroups.com
Sent: Wednesday, October 11, 2000 12:48 PM
Subject: [Vantage] Report Builder


Does anyone have a report builder report that will show
whether a job
made or lost money, based on sales price compared against
actual
costs associated with a job such as such as labor, burden,
material,
subcontracting.
Thanks
Chuck


eGroups Sponsor


We no longer allow attachments to files. To access/share
Report Files, please go to the following link:
http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you
try it, go to www.egroups.com, login and be sure to save your password,
choose My Groups, choose Vantage, then choose Files. If you save the
password, the link above will work the next time you try it.)



[Non-text portions of this message have been removed]


-------------------------- eGroups Sponsor

We no longer allow attachments to files. To access/share Report
Files, please go to the following link:
http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you
try it, go to www.egroups.com, login and be sure to save your password,
choose My Groups, choose Vantage, then choose Files. If you save the
password, the link above will work the next time you try it.)
--- ## Post #40 by @system
I have been challenged (politically correct word for 'Get it done or else') to write a report for on of the VP's. He likes to look @ the invoice aging on screen, and especially is interested in the 'Avg. Days to Pay'.

Has anyone put together a report that shows 'Avg. Days' to Pay' that they would be willing to share. It looks to be a fairly tricky calculation, so I thought I would ask first.

Thanks for any help!!

George Brockman II
Gasket Engineering
--- ## Post #41 by @system
George,

I don't think we actually have this report written, but it shouldn't
be to bad to do. On the invoice header table, there are fields for
invoice date and closed date (when paid). Just create a calculated
field that subtracts invoice date from closed date. This should give # of
days to close. Then aggregate by customer the number of days to close
and use an average field. Hope this helps (and works?).

Tim Care
Electro Chemical Finishing

----- Original Message -----
From: "George Brockman II" <gbrockman@...>
To: <vantage@egroups.com>
Sent: Wednesday, November 01, 2000 12:01 PM
Subject: [Vantage] Report Builder


> I have been challenged (politically correct word for 'Get it done or
else') to write a report for on of the VP's. He likes to look @ the invoice
aging on screen, and especially is interested in the 'Avg. Days to Pay'.
>
> Has anyone put together a report that shows 'Avg. Days' to Pay' that they
would be willing to share. It looks to be a fairly tricky calculation, so I
thought I would ask first.
>
> Thanks for any help!!
>
> George Brockman II
> Gasket Engineering
>
>
>
> We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time you try it, go
to www.egroups.com, login and be sure to save your password, choose My
Groups, choose Vantage, then choose Files. If you save the password, the
link above will work the next time you try it.)
>
--- ## Post #42 by @system
George,

Go to http://www.egroups.com/files/vantage/ and poke around
our library. There are several A/R reports there, one may
suit your needs.

have fun,
John


> -----Original Message-----
> From: George Brockman II [mailto:gbrockman@...]
> Sent: Wednesday, November 01, 2000 9:02 AM
> To: 'vantage@egroups.com'
> Subject: [Vantage] Report Builder
--- ## Post #43 by @system
I have a couple of reports that might work for you. They show past dues,
with an automated dunning letter report.

Shirley H. Graver
Systems Administrator
Rubber Associates Inc. (Certified to QS9000/ISO9002)
Cleveland/Akron, Ohio

-----Original Message-----
From: George Brockman II [mailto:gbrockman@...]
Sent: Wednesday, November 01, 2000 12:02 PM
To: 'vantage@egroups.com'
Subject: [Vantage] Report Builder


I have been challenged (politically correct word for 'Get it done or
else') to write a report for on of the VP's. He likes to look @ the invoice
aging on screen, and especially is interested in the 'Avg. Days to Pay'.

Has anyone put together a report that shows 'Avg. Days' to Pay' that they
would be willing to share. It looks to be a fairly tricky calculation, so I
thought I would ask first.

Thanks for any help!!

George Brockman II
Gasket Engineering


eGroups Sponsor


We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go
to www.egroups.com, login and be sure to save your password, choose My
Groups, choose Vantage, then choose Files. If you save the password, the
link above will work the next time you try it.)



[Non-text portions of this message have been removed]
--- ## Post #44 by @system
I have written a scheduling report using Report Builder. I am using
jobhead, joboper, wrkcenter, and memos. My problem is, if there is
more than one memo description it brings the memo from each memo
description. I want to specify which memo description to use, ie. if
the memo descriptions are "Purchasing", and "Scheduling", and I want
to use the memotext only from "Scheduling", how can I do this.
Thanks
Chuck
--- ## Post #45 by @system
How do I save a report in report builder so that someone else can
open it in MS Word. I would like to be able to save as a file, then
email it to a remote site. When I follow the directions in the help
file, it doesn't work correct.
Thanks
Chuck
--- ## Post #46 by @system
All you RB Guru's. I would like to include the memo text on a report
that I have written, but I only want the text to the first carriage
return. Any ideas??
--- ## Post #47 by @system
Charles -

Create a calculated field based on the memo field.
Use the SUBSTRING function and pull the portion
up to the first carriage return.

HTH,
Calvin
--- ## Post #48 by @system
Does anyone know a formula for report builder to parse a text string
to the first carriage return.
Thanks
Chuck
--- ## Post #49 by @system
Chuck,
Here's one I use for Part Descriptions:

SUBSTRING(Part.PartDescription, 1, INDEX(Part.PartDescription, CHR(10)))

HTH
================
Steve Sanders
Delta Centrifugal Corp.

-----Original Message-----
From: Charles Metcalf [mailto:chuck_metcalf@...]
Sent: Thursday, January 04, 2001 7:19 AM
To: vantage@egroups.com
Subject: [Vantage] Report Builder


Does anyone know a formula for report builder to parse a text string
to the first carriage return.
Thanks
Chuck



eGroups Sponsor

12 FREE CDs! Click for Details

We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go
to www.egroups.com, login and be sure to save your password, choose My
Groups, choose Vantage, then choose Files. If you save the password, the
link above will work the next time you try it.)



[Non-text portions of this message have been removed]
--- ## Post #50 by @system
Steve,

Worked great, Thank You

Chuck

-----Original Message-----
From: Steve Sanders [mailto:ssanders@...]
Sent: Thursday, January 04, 2001 8:25 AM
To: vantage@egroups.com
Subject: RE: [Vantage] Report Builder


Chuck,
Here's one I use for Part Descriptions:

SUBSTRING(Part.PartDescription, 1, INDEX(Part.PartDescription, CHR(10)))

HTH
================
Steve Sanders
Delta Centrifugal Corp.

-----Original Message-----
From: Charles Metcalf [mailto:chuck_metcalf@...]
Sent: Thursday, January 04, 2001 7:19 AM
To: vantage@egroups.com
Subject: [Vantage] Report Builder


Does anyone know a formula for report builder to parse a text string
to the first carriage return.
Thanks
Chuck



eGroups Sponsor

12 FREE CDs! Click for Details

We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go
to www.egroups.com, login and be sure to save your password, choose My
Groups, choose Vantage, then choose Files. If you save the password, the
link above will work the next time you try it.)



[Non-text portions of this message have been removed]


We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)
--- ## Post #51 by @system
I do not have a lot of Report Builder experience, and have not been
to school. I have been working on a Report Builder report, and almost
have it like I want it. I have one item that I have not been able to
resolve. Is there anyone that is willing to look at what I have done,
and the area I am having the problem with, and try to point me in the
right direction.
Thanks
Chuck
--- ## Post #52 by @system
I piddle around with RB from time to time, I'll look if you like.

Shirley Graver (End User)
Sys Admin
Rubber Associates


[Non-text portions of this message have been removed]
--- ## Post #53 by @system
Yes. Forward me your report & I will give it a try.

Patrick J. Winter
Information Services Manager
sSc Specialty Screw Corporation
Vantage 4.00.901

-----Original Message-----
From: Charles Metcalf [mailto:chuck_metcalf@...]
Sent: Thursday, January 04, 2001 12:58 PM
To: vantage@egroups.com
Subject: [Vantage] Report Builder


I do not have a lot of Report Builder experience, and have not been
to school. I have been working on a Report Builder report, and almost
have it like I want it. I have one item that I have not been able to
resolve. Is there anyone that is willing to look at what I have done,
and the area I am having the problem with, and try to point me in the
right direction.
Thanks
Chuck


We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)
--- ## Post #54 by @system
In DCD Classic there was a field called LastOperationWorked. Is there
a similiar field in Vantage. I have not been able to find it.
Thanks
Chuck
--- ## Post #55 by @system
In DCD Classic there was a field called Last Operation Worked. Is
there a similiar field in Vantage.
Thanks
Chuck
--- ## Post #56 by @system
Chuck,

Specifically what are you trying to determine ? Having never worked with
Classic I'm not sure what you are asking for.

Todd Anderson

-----Original Message-----
From: Charles Metcalf [mailto:chuck_metcalf@...]
Sent: Thursday, January 11, 2001 1:54 PM
To: vantage@egroups.com
Subject: [Vantage] Report Builder


In DCD Classic there was a field called Last Operation Worked. Is
there a similiar field in Vantage.
Thanks
Chuck




eGroups Sponsor

<http://rd.yahoo.com/M=149861.1280212.2876301.2/D=egroupmail/S=1700007183:N/
A=473697/?http://www.newaydirect.com>

We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
<http://www.egroups.com/files/vantage/>
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)
--- ## Post #57 by @system
I don't know of a field like that. That doesn't mean there isn't one, but I
haven't seen it.

You could attempt to duplicate this field using report builder and
calculating a field based on the labor Detail dates and times to find the
last operation worked for a specific assembly of job. I think that would be
fairly simple to do if that is what you are looking for.



=============================================
In DCD Classic there was a field called Last Operation Worked. Is
there a similiar field in Vantage.
Thanks
Chuck
--- ## Post #58 by @system
Todd,

I am trying to find a field that I can put on a status report that will
show where we are on the work order.
Seq Work Center Operation Status
10 40 Draw Material 20 Cut Complete
20 30 Cnc Machine 30 Profile Complete
30 85 Heat Treat 15 Age

In the above example we would know we were through Machine and the next
work center would be heat treat.

Thanks
Chuck



Chuck,

Specifically what are you trying to determine ? Having never worked with
Classic I'm not sure what you are asking for.

Todd Anderson



In DCD Classic there was a field called Last Operation Worked. Is
there a similiar field in Vantage.
Thanks
Chuck
--- ## Post #59 by @system
Chuck,

Link JOBHEAD to JOBOPER

JOBHEAD.JOBCOMPLETE = 'Yes' indicates that the job is complete
JOBOPER.OPCOMPLETE = 'Yes' indicates that the operation is complete
JOBOPER.SETUPCOMPLETE = 'Yes" indicates that SETUP is complete

etc.

Does this help ?

Todd Anderson

-----Original Message-----
From: Charles Metcalf [mailto:chuck_metcalf@...]
Sent: Thursday, January 11, 2001 2:34 PM
To: vantage@egroups.com
Subject: RE: [Vantage] Report Builder


Todd,

I am trying to find a field that I can put on a status report that will
show where we are on the work order.
Seq Work Center
Operation Status
10 40 Draw Material 20
Cut Complete
20 30 Cnc Machine 30
Profile Complete
30 85 Heat Treat 15 Age

In the above example we would know we were through Machine and the next
work center would be heat treat.

Thanks
Chuck



Chuck,

Specifically what are you trying to determine ? Having never worked with
Classic I'm not sure what you are asking for.

Todd Anderson



In DCD Classic there was a field called Last Operation Worked. Is
there a similiar field in Vantage.
Thanks
Chuck







eGroups Sponsor

<http://rd.yahoo.com/M=168381.1286195.2882029.2/D=egroupmail/S=1700007183:N/
A=539294/?http://subscribe.wsj.com/yahoo> Click here to subscribe.
Click here to subscribe.

We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
<http://www.egroups.com/files/vantage/>
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)
--- ## Post #60 by @system
There is a field 'OpComplete' on the JobOper table that you could use to get
what you are saying.
--- ## Post #61 by @system
Charles:

I have a report that shows a summary of the status of each op and assembly
on a job. Would that help you?

Lydia
lcoffman@...

-----Original Message-----
From: Charles Metcalf [mailto:chuck_metcalf@...]
Sent: Thursday, January 11, 2001 12:34 PM
To: vantage@egroups.com
Subject: RE: [Vantage] Report Builder

Todd,

I am trying to find a field that I can put on a status report that will
show where we are on the work order.
Seq Work Center
Operation Status
10 40 Draw Material
20 Cut Complete
20 30 Cnc Machine
30 Profile Complete
30 85 Heat Treat
15 Age

In the above example we would know we were through Machine and the next
work center would be heat treat.

Thanks
Chuck



Chuck,

Specifically what are you trying to determine ? Having never worked with
Classic I'm not sure what you are asking for.

Todd Anderson



In DCD Classic there was a field called Last Operation Worked. Is
there a similiar field in Vantage.
Thanks
Chuck






We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)
--- ## Post #62 by @system
That report would certainly help me. Could you post it or send it to me
directly?

Thanks,
Kathy Hambleton
Electron Energy Corporation
717-898-2294
kbh@...



-----Original Message-----
From: Lydia Coffman [mailto:lcoffman@...]
Sent: Thursday, January 11, 2001 5:23 PM
To: vantage@egroups.com
Subject: RE: [Vantage] Report Builder


Charles:

I have a report that shows a summary of the status of each op and assembly
on a job. Would that help you?

Lydia
lcoffman@...
--- ## Post #63 by @system
I cannot remember who pointed me in this direction, but it really
helped. Now I have another question. This formula "SUBSTRING
(MemoText, 1, INDEX(MemoText, CHR(10)))" prints the text in the
MemoText field to the first carriage return. How would the formula be
revised to skip the text before the first carriage return and then
print the text after the first carriage return
--- ## Post #64 by @system
Chuck,

To extract the text after the first carriage return:

SUBSTRING(MemoText, INDEX(MemoText, CHR(10))+1, LENGTH(MemoText))"

Regards
Jim Stetter
-----Original Message-----
From: Charles Metcalf [mailto:chuck_metcalf@...]
Sent: Friday, January 12, 2001 8:35 AM
To: vantage@egroups.com
Subject: [Vantage] Report Builder


I cannot remember who pointed me in this direction, but it really
helped. Now I have another question. This formula "SUBSTRING
(MemoText, 1, INDEX(MemoText, CHR(10)))" prints the text in the
MemoText field to the first carriage return. How would the formula be
revised to skip the text before the first carriage return and then
print the text after the first carriage return





[Non-text portions of this message have been removed]
--- ## Post #65 by @system
Charles -

Create two calculated fields
The first field extracts the portion from position 1 to the first carriage
return.

cfFirstPart = "SUBSTRING(MemoText, 1, INDEX(MemoText, CHR(10)))"

The second field extract the portion from the 1st character after the 1st
carriage return to the second carriage return.

cfSecondPart = "SUBSTRING(MemoText, (INDEX(MemoText, CHR(10)) + 1),
INDEX(MemoText, CHR(10), 2))"

HTH,
Calvin


----- Original Message -----
From: Charles Metcalf <chuck_metcalf@...>
To: <vantage@egroups.com>
Sent: Friday, January 12, 2001 7:35 AM
Subject: [Vantage] Report Builder


> I cannot remember who pointed me in this direction, but it really
> helped. Now I have another question. This formula "SUBSTRING
> (MemoText, 1, INDEX(MemoText, CHR(10)))" prints the text in the
> MemoText field to the first carriage return. How would the formula be
> revised to skip the text before the first carriage return and then
> print the text after the first carriage return
>
>
>
>
>
> We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time you try it, go
to www.egroups.com, login and be sure to save your password, choose My
Groups, choose Vantage, then choose Files. If you save the password, the
link above will work the next time you try it.)
--- ## Post #66 by @system
Charles,

I'm sorry but I've been out with eye surgery since last Wednesday. I
made several job status reports which I have shared with others. We
have a Job Structure report which shows how the job is structured when
released. We have a Shortage Report which shows the job status by
assembly, operation and material. When an assembly, operation and/or
material requirement is met, that item drops off the list. If the job
is shown as complete in data entry and the quantity is less than
required, the item stays on the report. Let me know if you would like
one or more of these offline and I will send them to you.

Steve

-----Original Message-----
From: Charles Metcalf [SMTP:chuck_metcalf@...]
Sent: Thursday, January 11, 2001 3:34 PM
To: vantage@egroups.com
Subject: RE: [Vantage] Report Builder

Todd,

I am trying to find a field that I can put on a status report
that will
show where we are on the work order.
Seq Work Center
Operation Status
10 40 Draw
Material 20 Cut Complete
20 30 Cnc
Machine 30 Profile Complete
30 85 Heat
Treat 15 Age

In the above example we would know we were through Machine and
the next
work center would be heat treat.

Thanks
Chuck



Chuck,

Specifically what are you trying to determine ? Having never
worked with
Classic I'm not sure what you are asking for.

Todd Anderson



In DCD Classic there was a field called Last Operation Worked.
Is
there a similiar field in Vantage.
Thanks
Chuck






We no longer allow attachments to files. To access/share Report
Files, please go to the following link:
http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you
try it, go to www.egroups.com, login and be sure to save your password,
choose My Groups, choose Vantage, then choose Files. If you save the
password, the link above will work the next time you try it.)
--- ## Post #67 by @system
I would love to see these reports. Could you send them to me offline?

Thanks
Todd Hofert
Spartan Graphics, Inc.
(616)887-8243


-----Original Message-----
From: Steve Wirtz [mailto:SWirtz@...]
Sent: Monday, January 15, 2001 8:39 AM
To: 'vantage@egroups.com'
Subject: RE: [Vantage] Report Builder


Charles,

I'm sorry but I've been out with eye surgery since last Wednesday. I
made several job status reports which I have shared with others. We
have a Job Structure report which shows how the job is structured when
released. We have a Shortage Report which shows the job status by
assembly, operation and material. When an assembly, operation and/or
material requirement is met, that item drops off the list. If the job
is shown as complete in data entry and the quantity is less than
required, the item stays on the report. Let me know if you would like
one or more of these offline and I will send them to you.

Steve

-----Original Message-----
From: Charles Metcalf [SMTP:chuck_metcalf@...]
Sent: Thursday, January 11, 2001 3:34 PM
To: vantage@egroups.com
Subject: RE: [Vantage] Report Builder

Todd,

I am trying to find a field that I can put on a status report
that will
show where we are on the work order.
Seq Work Center
Operation Status
10 40 Draw
Material 20 Cut Complete
20 30 Cnc
Machine 30 Profile Complete
30 85 Heat
Treat 15 Age

In the above example we would know we were through Machine and
the next
work center would be heat treat.

Thanks
Chuck



Chuck,

Specifically what are you trying to determine ? Having never
worked with
Classic I'm not sure what you are asking for.

Todd Anderson



In DCD Classic there was a field called Last Operation Worked.
Is
there a similiar field in Vantage.
Thanks
Chuck






We no longer allow attachments to files. To access/share Report
Files, please go to the following link:
http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you
try it, go to www.egroups.com, login and be sure to save your password,
choose My Groups, choose Vantage, then choose Files. If you save the
password, the link above will work the next time you try it.)

We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)
--- ## Post #68 by @system
I would also like to take a look at these reports. Will they be posted?

Les Tingley
Decorated Products

> -----Original Message-----
> From: Todd Hofert [SMTP:thofert@...]
> Sent: Monday, January 15, 2001 8:53 AM
> To: vantage@egroups.com
> Subject: RE: [Vantage] Report Builder
>
> I would love to see these reports. Could you send them to me offline?
>
> Thanks
> Todd Hofert
> Spartan Graphics, Inc.
> (616)887-8243
>
>
> -----Original Message-----
> From: Steve Wirtz [mailto:SWirtz@...]
> Sent: Monday, January 15, 2001 8:39 AM
> To: 'vantage@egroups.com'
> Subject: RE: [Vantage] Report Builder
>
>
> Charles,
>
> I'm sorry but I've been out with eye surgery since last Wednesday. I
> made several job status reports which I have shared with others. We
> have a Job Structure report which shows how the job is structured when
> released. We have a Shortage Report which shows the job status by
> assembly, operation and material. When an assembly, operation and/or
> material requirement is met, that item drops off the list. If the job
> is shown as complete in data entry and the quantity is less than
> required, the item stays on the report. Let me know if you would like
> one or more of these offline and I will send them to you.
>
> Steve
>
> -----Original Message-----
> From: Charles Metcalf [SMTP:chuck_metcalf@...]
> Sent: Thursday, January 11, 2001 3:34 PM
> To: vantage@egroups.com
> Subject: RE: [Vantage] Report Builder
>
> Todd,
>
> I am trying to find a field that I can put on a status report
> that will
> show where we are on the work order.
> Seq Work Center
> Operation Status
> 10 40 Draw
> Material 20 Cut Complete
> 20 30 Cnc
> Machine 30 Profile Complete
> 30 85 Heat
> Treat 15 Age
>
> In the above example we would know we were through Machine and
> the next
> work center would be heat treat.
>
> Thanks
> Chuck
>
>
>
> Chuck,
>
> Specifically what are you trying to determine ? Having never
> worked with
> Classic I'm not sure what you are asking for.
>
> Todd Anderson
>
>
>
> In DCD Classic there was a field called Last Operation Worked.
> Is
> there a similiar field in Vantage.
> Thanks
> Chuck
>
>
>
>
>
>
> We no longer allow attachments to files. To access/share Report
> Files, please go to the following link:
> http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time you
> try it, go to www.egroups.com, login and be sure to save your password,
> choose My Groups, choose Vantage, then choose Files. If you save the
> password, the link above will work the next time you try it.)
>
> We no longer allow attachments to files. To access/share Report Files,
> please go to the following link: http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time you try it, go
> to
> www.egroups.com, login and be sure to save your password, choose My
> Groups,
> choose Vantage, then choose Files. If you save the password, the link
> above
> will work the next time you try it.)
>
>
> We no longer allow attachments to files. To access/share Report Files,
> please go to the following link: http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time you try it, go
> to www.egroups.com, login and be sure to save your password, choose My
> Groups, choose Vantage, then choose Files. If you save the password, the
> link above will work the next time you try it.)
--- ## Post #69 by @system
We tried to post the job shortage report once before but they (E-groups)
had some problems with it so I have sent it directly to others. I wish
they would help me try again. I'm off to a meeting so I will send
later.

Steve

-----Original Message-----
From: Les Tingley [SMTP:ltingley@...]
Sent: Monday, January 15, 2001 9:02 AM
To: 'vantage@egroups.com'
Subject: RE: [Vantage] Report Builder

I would also like to take a look at these reports. Will they be
posted?

Les Tingley
Decorated Products

> -----Original Message-----
> From: Todd Hofert [SMTP:thofert@...]
> Sent: Monday, January 15, 2001 8:53 AM
> To: vantage@egroups.com
> Subject: RE: [Vantage] Report Builder
>
> I would love to see these reports. Could you send them to me
offline?
>
> Thanks
> Todd Hofert
> Spartan Graphics, Inc.
> (616)887-8243
>
>
> -----Original Message-----
> From: Steve Wirtz [mailto:SWirtz@...]
> Sent: Monday, January 15, 2001 8:39 AM
> To: 'vantage@egroups.com'
> Subject: RE: [Vantage] Report Builder
>
>
> Charles,
>
> I'm sorry but I've been out with eye surgery since last
Wednesday. I
> made several job status reports which I have shared with
others. We
> have a Job Structure report which shows how the job is
structured when
> released. We have a Shortage Report which shows the job
status by
> assembly, operation and material. When an assembly, operation
and/or
> material requirement is met, that item drops off the list. If
the job
> is shown as complete in data entry and the quantity is less
than
> required, the item stays on the report. Let me know if you
would like
> one or more of these offline and I will send them to you.
>
> Steve
>
> -----Original Message-----
> From: Charles Metcalf
[SMTP:chuck_metcalf@...]
> Sent: Thursday, January 11, 2001 3:34 PM
> To: vantage@egroups.com
> Subject: RE: [Vantage] Report Builder
>
> Todd,
>
> I am trying to find a field that I can put on a status
report
> that will
> show where we are on the work order.
> Seq Work
Center
> Operation Status
> 10
40 Draw
> Material 20 Cut Complete
> 20
30 Cnc
> Machine 30 Profile Complete
> 30
85 Heat
> Treat 15 Age
>
> In the above example we would know we were through
Machine and
> the next
> work center would be heat treat.
>
> Thanks
> Chuck
>
>
>
> Chuck,
>
> Specifically what are you trying to determine ? Having
never
> worked with
> Classic I'm not sure what you are asking for.
>
> Todd Anderson
>
>
>
> In DCD Classic there was a field called Last Operation
Worked.
> Is
> there a similiar field in Vantage.
> Thanks
> Chuck
>
>
>
>
>
>
> We no longer allow attachments to files. To
access/share Report
> Files, please go to the following link:
> http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first
time you
> try it, go to www.egroups.com, login and be sure to save your
password,
> choose My Groups, choose Vantage, then choose Files. If you
save the
> password, the link above will work the next time you try it.)
>
> We no longer allow attachments to files. To access/share
Report Files,
> please go to the following link:
http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time you
try it, go
> to
> www.egroups.com, login and be sure to save your password,
choose My
> Groups,
> choose Vantage, then choose Files. If you save the password,
the link
> above
> will work the next time you try it.)
>
>
> We no longer allow attachments to files. To access/share
Report Files,
> please go to the following link:
http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time you
try it, go
> to www.egroups.com, login and be sure to save your password,
choose My
> Groups, choose Vantage, then choose Files. If you save the
password, the
> link above will work the next time you try it.)

We no longer allow attachments to files. To access/share Report
Files, please go to the following link:
http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you
try it, go to www.egroups.com, login and be sure to save your password,
choose My Groups, choose Vantage, then choose Files. If you save the
password, the link above will work the next time you try it.)
--- ## Post #70 by @system
Would you mind sending them to me too?
Thanks
Sophie

> -----Original Message-----
> From: Todd Hofert [SMTP:thofert@...]
> Sent: 15 January 2001 13:53
> To: vantage@egroups.com
> Subject: RE: [Vantage] Report Builder
>
> I would love to see these reports. Could you send them to me offline?
>
> Thanks
> Todd Hofert
> Spartan Graphics, Inc.
> (616)887-8243
>
>
> -----Original Message-----
> From: Steve Wirtz [mailto:SWirtz@...]
> Sent: Monday, January 15, 2001 8:39 AM
> To: 'vantage@egroups.com'
> Subject: RE: [Vantage] Report Builder
>
>
> Charles,
>
> I'm sorry but I've been out with eye surgery since last Wednesday. I
> made several job status reports which I have shared with others. We
> have a Job Structure report which shows how the job is structured when
> released. We have a Shortage Report which shows the job status by
> assembly, operation and material. When an assembly, operation and/or
> material requirement is met, that item drops off the list. If the job
> is shown as complete in data entry and the quantity is less than
> required, the item stays on the report. Let me know if you would like
> one or more of these offline and I will send them to you.
>
> Steve
>
> Â Â Â Â Â -----Original Message-----
> Â Â Â Â Â From:Â Â Â Â Â Charles Metcalf [SMTP:chuck_metcalf@...]
> Â Â Â Â Â Sent:Â Â Â Â Â Thursday, January 11, 2001 3:34 PM
> Â Â Â Â Â To:Â Â Â Â Â vantage@egroups.com
> Â Â Â Â Â Subject:Â Â Â Â Â RE: [Vantage] Report Builder
>
> Â Â Â Â Â Todd,
>
> Â Â Â Â Â Â I am trying to find a field that I can put on a status report
> that will
> Â Â Â Â Â show where we are on the work order.
>                     Seq               Work Center
> Operation        Status
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 10Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 40 Draw
> Material          20 Cut     Complete
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 20Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 30 Cnc
> Machine          30 Profile     Complete
> Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 30Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 85 Heat
> Treat          15 Age
>
> Â Â Â Â Â Â In the above example we would know we were through Machine and
> the next
> Â Â Â Â Â work center would be heat treat.
>
> Â Â Â Â Â Thanks
> Â Â Â Â Â Chuck
>
>
>
> Â Â Â Â Â Chuck,
>
>      Specifically what are you trying to determine ? Having never
> worked with
> Â Â Â Â Â Classic I'm not sure what you are asking for.
>
> Â Â Â Â Â Todd Anderson
>
>
>
> Â Â Â Â Â In DCD Classic there was a field called Last Operation Worked.
> Is
> Â Â Â Â Â there a similiar field in Vantage.
> Â Â Â Â Â Thanks
> Â Â Â Â Â Chuck
>
>
>
>
>
>
>      We no longer allow attachments to files. To access/share Report
> Files, please go to the following link:
> <http://www.egroups.com/files/vantage/>
> Â Â Â Â Â (Note:Â If this link does not work for you the first time you
> try it, go to www.egroups.com, login and be sure to save your
> password,
> choose My Groups, choose Vantage, then choose Files. If you save the
> password, the link above will work the next time you try it.)
>
> We no longer allow attachments to files. To access/share Report
> Files,
> please go to the following link:Â
> <http://www.egroups.com/files/vantage/>
> (Note:Â If this link does not work for you the first time you try it,
> go to
> www.egroups.com, login and be sure to save your password, choose My
> Groups,
> choose Vantage, then choose Files. If you save the password, the link
> above
> will work the next time you try it.)
>
>
>
> eGroups Sponsor
> Click Here!
> <http://rd.yahoo.com/M=169066.1281467.2883016.2/D=egroupmail/S=1700007
> 183:N/A=560430/*http://cgi.pathfinder.com/cgi-bin/magsubs/cc/subs/fort
> uneext1rf?EFFORTKEY=FOBTGJ4>
>
> We no longer allow attachments to files. To access/share Report
> Files, please go to the following link:Â
> <http://www.egroups.com/files/vantage/>
> (Note:Â If this link does not work for you the first time you try it,
> go to www.egroups.com, login and be sure to save your password, choose
> My Groups, choose Vantage, then choose Files. If you save the
> password, the link above will work the next time you try it.)
>
--- ## Post #71 by @system
I would like a copy of this offline also please.
Thanks,

Kimberly Maxwell
Westwood Precision, Inc.
PH: 425-347-1303 Ext. 41
Fax: 425-353-8945
email: kimberly.maxwell@...
www.westwoodprecision.com

> -----Original Message-----
> From: Steve Wirtz [mailto:SWirtz@...]
> Sent: Monday, January 15, 2001 8:39 AM
> To: 'vantage@egroups.com'
> Subject: RE: [Vantage] Report Builder
>
>
> Charles,
>
> I'm sorry but I've been out with eye surgery since last
Wednesday. I
> made several job status reports which I have shared with
others. We
> have a Job Structure report which shows how the job is
structured when
> released. We have a Shortage Report which shows the job
status by
> assembly, operation and material. When an assembly, operation
and/or
> material requirement is met, that item drops off the list. If
the job
> is shown as complete in data entry and the quantity is less
than
> required, the item stays on the report. Let me know if you
would like
> one or more of these offline and I will send them to you.
>
> Steve
--- ## Post #72 by @system
Hi,
I would love to see this report.
Thanks,
Judy Stauduhar
Taber Bushnell
judys@...


From: Steve Wirtz [mailto:SWirtz@...]
Sent: Monday, January 15, 2001 8:39 AM
To: 'vantage@egroups.com'
Subject: RE: [Vantage] Report Builder


Charles,

I'm sorry but I've been out with eye surgery since last Wednesday. I
made several job status reports which I have shared with others. We
have a Job Structure report which shows how the job is structured when
released. We have a Shortage Report which shows the job status by
assembly, operation and material. When an assembly, operation and/or
material requirement is met, that item drops off the list. If the job
is shown as complete in data entry and the quantity is less than
required, the item stays on the report. Let me know if you would like
one or more of these offline and I will send them to you.

Steve
--- ## Post #73 by @system
When you use conditional printing, what determines whether the
conditional printing choices are "True/False" or "Print When Field
has contents/Print When Field is Empty or Unknown", and can you
change them some how.
Thanks
Chuck
--- ## Post #74 by @system
What determines whether the choices in conditional printing
are "True/False" or "Print when field has contents/Print when field
in empty or unknown" and can you change the selection??
Thanks
Chuck
--- ## Post #75 by @system
You can create a calculated field to determine the parameters of the
"TRUE/FALSE" condition. Then reference the calculated field in the
condition area.

Shirley Graver
(End User)
Sys Admin
Rubber associates Inc.
Cleveland/Akron

-----Original Message-----
From: chuck_metcalf@... [mailto:chuck_metcalf@...]
Sent: Friday, January 26, 2001 2:55 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder


What determines whether the choices in conditional printing
are "True/False" or "Print when field has contents/Print when field
in empty or unknown" and can you change the selection??
Thanks
Chuck


eGroups Sponsor

www.




To unsubscribe from this group, send an email to:
vantage-unsubscribe@egroups.com





[Non-text portions of this message have been removed]
--- ## Post #76 by @system
At 02:51 PM 1/26/2001 , you wrote:
>When you use conditional printing, what determines whether the
>conditional printing choices are "True/False" or "Print When Field
>has contents/Print When Field is Empty or Unknown", and can you
>change them some how.

I think it's based on the data type of the field that you've selected in
the combo box. If the field is a boolean (true/false, yes/no) then it's
taken directly as such. For other types, like string, non-null = true,
null = false. For numeric, non-zero = true, zero = false. In addition,
all Progress data types can have an "unknown" value which is treated as false.

-Wayne
--- ## Post #77 by @system
Chuck, the choice of "True/False" or "Has contents/empty" changes with
the type of field you use as the condition. For example; if the field is a
character field then has contents/empty shows; if numeric you see
zero/nonzero; if logical you see True/False. You decide what field to use
as the conditional trigger to print or not print. I use this feature all the
time. One of the ways I use this feature is to control whether a subtotal
line prints. To do this, I have an aggregate (linecount) that counts the
number of details printed in the group, then have a calculated field
PrintSubTotal = iif(linecount=1,false,true). The "PrintSubTotal" goes in
the conditional print box field and I check True. Result -- if only 1
detail line in the group, I don't show a subtotal. Hope this helps.

Regards
Jim Stetter
-----Original Message-----
From: chuck_metcalf@... [mailto:chuck_metcalf@...]
Sent: Friday, January 26, 2001 2:55 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder


What determines whether the choices in conditional printing
are "True/False" or "Print when field has contents/Print when field
in empty or unknown" and can you change the selection??
Thanks
Chuck


eGroups Sponsor

www.




To unsubscribe from this group, send an email to:
vantage-unsubscribe@egroups.com





[Non-text portions of this message have been removed]
--- ## Post #78 by @system
I keep seeing messages about running report builder reports automatically. Can someone give me the exact syntax for a batch file or whatever is needed to accomplish this, and also how do you call out a specific library and report?
--- ## Post #79 by @system
Wayne Cox wrote:

> At 02:51 PM 1/26/2001 , you wrote:
> <snip>

> In addition,
> all Progress data types can have an "unknown" value which is treated as false.
>

Not quit true. It is neither true nor false. However, testing any value against an
unknown will always return a false value; except if you compare one unknown
against another unknown, you will get a true result. Also note ( we are getting
kind of esoteric here) you can have multiple unknowns in a unique index, since
each unknown is considered to be itself unique. Unknown sort high.

There will now be a short pause while everyone says --- Who Cares?.

--
/* ============================================================== */

William E. Colls Tel 613 591 0079
PROComputer Systems Fax 613 591 3924
67 Willow Glen Dr www.procomsys.com
Kanata Ontario Canada PEG Member 1998051404

Specialists in Progress Software development since 1985
--- ## Post #80 by @system
I need help on a formula: My data looks like this;

PromDate Part# ProdQty QtyDue Inv Value
2/9/01 12345 7 6 0
? 23456 0 5 15
3/1/01 45678 8 7 0
? 56789 0 8 10

I would like the value "Calculated Field in my report is ValueDate"
to show up if the PromDate is before 2/28/01, or if the unknown value
is in the PromDate, but there is enough inventory to support the
QtyDue.

Any help would be appreciated.

Chuck
--- ## Post #81 by @system
Assuming ValueDate is a date try this:
iif(PromDate < 2/28/01, PromDate, iif(inv >= QtyDue, today(),
03/01/01))

If ValueDate could be yes/no then the formula is:
iif(PromDate < 2/28/01, yes, iif(inv >= QtyDue, yes, no))

You could use that field to control whether a line would print or not.

HTH
RRD

On 9 Feb 2001, at 15:10, chuck_metcalf@... wrote:

I need help on a formula: My data looks like this;

PromDate Part# ProdQty QtyDue Inv
Value
2/9/01 12345 7 6 0
? 23456 0 5 15
3/1/01 45678 8 7 0 
? 56789 0 8 10

I would like the value "Calculated Field in my report
is ValueDate" 
to show up if the PromDate is before 2/28/01, or if
the unknown value 
is in the PromDate, but there is enough inventory to
support the 
QtyDue. 

Any help would be appreciated.

Chuck



Russ Dover
IS Manager
Weaver Industries, Inc.
717 336 7507 phone
717 336 4182 fax
rdover@...
www.weaverind.com
--- ## Post #82 by @system
Russ,
Thank You for your response. The valuedate is actually the $value of the qty
due.
Chuck

-----Original Message-----
From: Russ Dover [mailto:rdover@...]
Sent: Friday, February 09, 2001 9:52 AM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


Assuming ValueDate is a date try this:
iif(PromDate < 2/28/01, PromDate, iif(inv >= QtyDue, today(),
03/01/01))


If ValueDate could be yes/no then the formula is:
iif(PromDate < 2/28/01, yes, iif(inv >= QtyDue, yes, no))

You could use that field to control whether a line would print or not.

HTH
RRD

On 9 Feb 2001, at 15:10, chuck_metcalf@... wrote:

I need help on a formula: My data looks like this;

PromDate Part# ProdQty QtyDue Inv
Value
2/9/01 12345 7 6 0
? 23456 0 5 15
3/1/01 45678 8 7 0 
? 56789 0 8 10

I would like the value "Calculated Field in my report
is ValueDate" 
to show up if the PromDate is before 2/28/01, or if
the unknown value 
is in the PromDate, but there is enough inventory to
support the 
QtyDue. 

Any help would be appreciated.

Chuck



Russ Dover
IS Manager
Weaver Industries, Inc.
717 336 7507 phone
717 336 4182 fax
rdover@...
www.weaverind.com


To unsubscribe from this group, send an email to:
vantage-unsubscribe@egroups.com
--- ## Post #83 by @system
Does anyone have a report that will identify manufactured parts that
do not have methods available to pull into jobs.
Thanks
Chuck
--- ## Post #84 by @system
Is there anyway using Report Builder that you can tell if methods for
a part number have been approved.
Thanks
Chuck
--- ## Post #85 by @system
The easiest thing is to run a report that will show only those manufactured
parts that have no labor costs.

Greg Clauser
Lakin General Corp.

-----Original Message-----
From: chuck_metcalf@... [mailto:chuck_metcalf@...]
Sent: Tuesday, February 13, 2001 8:36 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder


Does anyone have a report that will identify manufactured parts that
do not have methods available to pull into jobs.
Thanks
Chuck
--- ## Post #86 by @system
Use the PartBOM table, filter for approved = Yes. That's about the only way
I can think of doing it, but I'm sure there must be some others.

Check the data dictionary to see if any other of the part tables list
"approved".

Lydia

-----Original Message-----
From: chuck_metcalf@... [mailto:chuck_metcalf@...]
Sent: Tuesday, February 13, 2001 9:48 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder

Is there anyway using Report Builder that you can tell if methods for
a part number have been approved.
Thanks
Chuck



To unsubscribe from this group, send an email to:
vantage-unsubscribe@egroups.com
--- ## Post #87 by @system
PartBOM is just a temp table. You'd have to start with partrev.

Lydia Coffman wrote:
>
> Use the PartBOM table, filter for approved = Yes. That's about the only way
> I can think of doing it, but I'm sure there must be some others.
>
> Check the data dictionary to see if any other of the part tables list
> "approved".
>
> Lydia
>
> -----Original Message-----
> From: chuck_metcalf@... [mailto:chuck_metcalf@...]
> Sent: Tuesday, February 13, 2001 9:48 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Report Builder
>
> Is there anyway using Report Builder that you can tell if methods for
> a part number have been approved.
> Thanks
> Chuck
>
> To unsubscribe from this group, send an email to:
> vantage-unsubscribe@egroups.com
>
>
> To unsubscribe from this group, send an email to:
> vantage-unsubscribe@egroups.com
--- ## Post #88 by @system
Absolutely correct. Didn't mean to steer anybody down the wrong path.

Lydia


-----Original Message-----
From: Joe Konecny [mailto:jkonecn@...]
Sent: Tuesday, February 13, 2001 1:36 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder

PartBOM is just a temp table. You'd have to start with partrev.

Lydia Coffman wrote:
>
> Use the PartBOM table, filter for approved = Yes. That's about the only
way
> I can think of doing it, but I'm sure there must be some others.
>
--- ## Post #89 by @system
In a logical field when the results are Yes, No, ?, how can I pick up
the records that are No and ?. The unknown is because no data has
been entered into the field.
Thanks
Chuck
--- ## Post #90 by @system
At 11:37 AM 2/26/2001 , you wrote:
>In a logical field when the results are Yes, No, ?, how can I pick up
>the records that are No and ?. The unknown is because no data has

Field <> true


-WC
--- ## Post #91 by @system
if result <> YES or

if result = NO or result = ?

Hope this helps.

Tim Care
Electro Chemical Finishing
----- Original Message -----
From: <chuck_metcalf@...>
To: <vantage@yahoogroups.com>
Sent: Monday, February 26, 2001 11:37 AM
Subject: [Vantage] Report Builder


> In a logical field when the results are Yes, No, ?, how can I pick up
> the records that are No and ?. The unknown is because no data has
> been entered into the field.
> Thanks
> Chuck
>
>
> To unsubscribe from this group, send an email to:
> vantage-unsubscribe@egroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
--- ## Post #92 by @system
Thank You for your quick response, but it doesn't seem to work. I am working
with PartRev.Approved. If the field is blank, nothing shows up. Any other
ideas.
Thanks
Chuck


if result <> YES or

if result = NO or result = ?

Hope this helps.

> In a logical field when the results are Yes, No, ?, how can I pick up
> the records that are No and ?. The unknown is because no data has
> been entered into the field.
> Thanks
> Chuck
--- ## Post #93 by @system
Chuck,

Try creating a calculated field PR-Apr = IIF(partrev.approved =
?,No,partrev.approved)

Then filter on PR-Apr. The calc would force all unkown values to be a
logical NO while leaving all other values as is.

Todd Anderson


--Original Message-----
From: Charles Metcalf [mailto:chuck_metcalf@...]
Sent: Monday, February 26, 2001 11:26 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder



Thank You for your quick response, but it doesn't seem to work. I am working
with PartRev.Approved. If the field is blank, nothing shows up. Any other
ideas.
Thanks
Chuck


if result <> YES or

if result = NO or result = ?

Hope this helps.

> In a logical field when the results are Yes, No, ?, how can I pick up
> the records that are No and ?. The unknown is because no data has
> been entered into the field.
> Thanks
> Chuck



Yahoo! Groups Sponsor

<http://rd.yahoo.com/M=140160.1334960.2924124.2/D=egroupmail/S=1700007183:N/
A=488695/?http://www.optionetics.com/free_tym.asp> Become a Better Trader!


<http://us.adserver.yahoo.com/l?M=140160.1334960.2924124.2/D=egroupmail/S=17
00007183:N/A=488695/rand=886884757>

To unsubscribe from this group, send an email to:
vantage-unsubscribe@egroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
--- ## Post #94 by @system
Is there a way to search a string of text and only have the lines on
a report that have certain text.
Thanks
Chuck
--- ## Post #95 by @system
I have done this several times using SUBSTRING, INDEX and other functions to
set a logical and then test the logical on a conditioned line. You can have
several conditioned lines in the same group. I have also done this within a
line and set two calculated string fields to either be a value or spaces and
then place them on top of each other so that only the "true" one overprints
the spaces from the other. Handy for conditional bolding or color (red =
negative). Hope one of these are what you were looking for.
-Todd C.

-----Original Message-----
From: chuck_metcalf@... [mailto:chuck_metcalf@...]
Sent: Wednesday, February 28, 2001 11:27 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder


Is there a way to search a string of text and only have the lines on
a report that have certain text.
Thanks
Chuck



Yahoo! Groups Sponsor

<http://rd.yahoo.com/M=179201.1342935.2933264.2/D=egroupmail/S=1700007183:N/
A=585621/*http://www.egghead.com/category/inv/00000870/03597619.htm?mid=yaho
o_cga153_cs> At Egghead.com...We Mean Business!

<http://us.adserver.yahoo.com/l?M=179201.1342935.2933264.2/D=egroupmail/S=17
00007183:N/A=585621/rand=602854443>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #96 by @system
How are you doing conditional bolding or color in Report Builder?

Todd Caughey wrote:
>
> I have done this several times using SUBSTRING, INDEX and other functions to
> set a logical and then test the logical on a conditioned line. You can have
> several conditioned lines in the same group. I have also done this within a
> line and set two calculated string fields to either be a value or spaces and
> then place them on top of each other so that only the "true" one overprints
> the spaces from the other. Handy for conditional bolding or color (red =
> negative). Hope one of these are what you were looking for.
> -Todd C.
>
> -----Original Message-----
> From: chuck_metcalf@... [mailto:chuck_metcalf@...]
> Sent: Wednesday, February 28, 2001 11:27 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Report Builder
>
> Is there a way to search a string of text and only have the lines on
> a report that have certain text.
> Thanks
> Chuck
>
> Yahoo! Groups Sponsor
>
> <http://rd.yahoo.com/M=179201.1342935.2933264.2/D=egroupmail/S=1700007183:N/
> A=585621/*http://www.egghead.com/category/inv/00000870/03597619.htm?mid=yaho
> o_cga153_cs> At Egghead.com...We Mean Business!
>
> <http://us.adserver.yahoo.com/l?M=179201.1342935.2933264.2/D=egroupmail/S=17
> 00007183:N/A=585621/rand=602854443>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/> .
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--- ## Post #97 by @system
RB, I noticed one time, allows printing fields over the top of each other.
Often by error and it looks very garbled. If I have a condition I want to
test for and print boldly I create a logical (perhaps PrintBold) and set it
to True. I can then create two calculated string fields for IIF(PrintBold
= True,STRING(value,'-format-'.' ') and the opposite IIF(PrintBold <>
True,STRING(value,'-format-'.' ') I then call one PrtValueBold and the
other PrtValueReg. On the report I format the bold one as bold and place
both fields on top of each other. It makes it a little hard to get decimals
to line up and to see one or the other but only one will print anything and
it will print over spaces (the other field). On the final report you can't
see the spaces even if they are bold :) so it looks OK. Ditto for font
colors instead of (or with) bold. On screen or on color printing this looks
really sharp for pointing out particular data.

-Todd C.

-----Original Message-----
From: Joe Konecny [mailto:jkonecn@...]
Sent: Wednesday, February 28, 2001 12:05 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


How are you doing conditional bolding or color in Report Builder?

Todd Caughey wrote:
>
> I have done this several times using SUBSTRING, INDEX and other functions
to
> set a logical and then test the logical on a conditioned line. You can
have
> several conditioned lines in the same group. I have also done this within
a
> line and set two calculated string fields to either be a value or spaces
and
> then place them on top of each other so that only the "true" one
overprints
> the spaces from the other. Handy for conditional bolding or color (red =
> negative). Hope one of these are what you were looking for.
> -Todd C.
>
> -----Original Message-----
> From: chuck_metcalf@... [mailto:chuck_metcalf@...]
> Sent: Wednesday, February 28, 2001 11:27 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Report Builder
>
> Is there a way to search a string of text and only have the lines on
> a report that have certain text.
> Thanks
> Chuck
>
> Yahoo! Groups Sponsor
>
> <
http://rd.yahoo.com/M=179201.1342935.2933264.2/D=egroupmail/S=1700007183:N/
<http://rd.yahoo.com/M=179201.1342935.2933264.2/D=egroupmail/S=1700007183:N/
>
> A=585621/*
http://www.egghead.com/category/inv/00000870/03597619.htm?mid=yaho
<http://www.egghead.com/category/inv/00000870/03597619.htm?mid=yaho>
> o_cga153_cs> At Egghead.com...We Mean Business!
>
> <
http://us.adserver.yahoo.com/l?M=179201.1342935.2933264.2/D=egroupmail/S=17
<http://us.adserver.yahoo.com/l?M=179201.1342935.2933264.2/D=egroupmail/S=17
>
> 00007183:N/A=585621/rand=602854443>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> < http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> >
.
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>


Yahoo! Groups Sponsor

<http://rd.yahoo.com/M=162801.1342103.2934627.1280005/D=egroupmail/S=1700007
183:N/A=599088/*http://www.knowledgestorm.com/jump_white.html?c=Yahoo&n=eLer
t_ComputersInternet_Software_WhiteGridTime&t=ad> Click Here to Find Software
Faster
Click Here to Find Software Faster

<http://us.adserver.yahoo.com/l?M=162801.1342103.2934627.1280005/D=egroupmai
l/S=1700007183:N/A=599088/rand=879900813>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #98 by @system
Todd,
I have not had any success in making this formula. This is a typical text
line that I am dealing with.

Tractor MATERIAL: 2024-T42-0063-C F-17.26 + F-20.03 PER MilStd.
CERTIFICATIONS REQUIRED. THANK YOU.

I would like only the text lines that have F-17.26 to print and the info is
randomly spaced.
Any help would be appreciated.
Thanks
Chuck


I have done this several times using SUBSTRING, INDEX and other functions to
set a logical and then test the logical on a conditioned line. You can have
several conditioned lines in the same group. I have also done this within a
line and set two calculated string fields to either be a value or spaces and
then place them on top of each other so that only the "true" one overprints
the spaces from the other. Handy for conditional bolding or color (red =
negative). Hope one of these are what you were looking for.
-Todd C.

Is there a way to search a string of text and only have the lines on
a report that have certain text.
Thanks
Chuck
--- ## Post #99 by @system
1. I loaded the whole message into TestValue (a caluclated field)
2. I created another calculated field: TestPositive:
IIF(INDEX(TestValue,'F-17.26',1) > 0,Yes,No)
Note you could load the string searched for into its own field to make
formula more universal
Such as: IIF(INDEX(TestValue,SearchFor,1) > 0,Yes,No)
3. Create a BandLine in a group, insert what you need into it (fields, text,
etc...)
4. Right click on bandline margin at far left edge to get to bandline
properties (there are other ways too)
5. In properties check mark Print Conditional Field and enter TestPositive
in it and select "Print When Field True"

This will print that line only when the TestValue string has 'F-17.26'
anywhere in it. I use the same test to check for jobs we set up with a T or
C in the ID (tooling jobs) and the SO group is not Engineering - I then
print a warning line on certain reports.

Good luck,
-Todd C.

-----Original Message-----
From: Charles Metcalf [mailto:chuck_metcalf@...]
Sent: Thursday, March 01, 2001 7:33 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder


Todd,
I have not had any success in making this formula. This is a typical text
line that I am dealing with.

Tractor MATERIAL: 2024-T42-0063-C F-17.26 + F-20.03 PER MilStd.
CERTIFICATIONS REQUIRED. THANK YOU.

I would like only the text lines that have F-17.26 to print and the info is
randomly spaced.
Any help would be appreciated.
Thanks
Chuck


I have done this several times using SUBSTRING, INDEX and other functions to
set a logical and then test the logical on a conditioned line. You can have
several conditioned lines in the same group. I have also done this within a
line and set two calculated string fields to either be a value or spaces and
then place them on top of each other so that only the "true" one overprints
the spaces from the other. Handy for conditional bolding or color (red =
negative). Hope one of these are what you were looking for.
-Todd C.

Is there a way to search a string of text and only have the lines on
a report that have certain text.
Thanks
Chuck



Yahoo! Groups Sponsor

<http://rd.yahoo.com/M=162801.1342103.2934627.1280005/D=egroupmail/S=1700007
183:N/A=599089/*http://www.knowledgestorm.com/jump_white.html?c=Yahoo&n=eLer
t_ComputersInternet_Software_WhiteGridOptions&t=ad> Click Here to Find
Software Faster
Click Here to Find Software Faster

<http://us.adserver.yahoo.com/l?M=162801.1342103.2934627.1280005/D=egroupmai
l/S=1700007183:N/A=599089/rand=165901064>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #100 by @system
Charles,
Try this: create a calculated field called something like PrintThis using
this formula:

IIF(LOOKUP("F-17.26",Part.Description," ") > 0, True, False)

and then set conditional printing to print when PrintThis = True.
Hope this helps.
================
Steve Sanders
Delta Centrifugal Corp.
-----Original Message-----
From: Charles Metcalf [mailto:chuck_metcalf@...]
Sent: Thursday, March 01, 2001 7:33 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder


Todd,
I have not had any success in making this formula. This is a typical
text
line that I am dealing with.

Tractor MATERIAL: 2024-T42-0063-C F-17.26 + F-20.03 PER MilStd.
CERTIFICATIONS REQUIRED. THANK YOU.

I would like only the text lines that have F-17.26 to print and the info
is
randomly spaced.
Any help would be appreciated.
Thanks
Chuck


I have done this several times using SUBSTRING, INDEX and other functions
to
set a logical and then test the logical on a conditioned line. You can
have
several conditioned lines in the same group. I have also done this within
a
line and set two calculated string fields to either be a value or spaces
and
then place them on top of each other so that only the "true" one
overprints
the spaces from the other. Handy for conditional bolding or color (red =
negative). Hope one of these are what you were looking for.
-Todd C.

Is there a way to search a string of text and only have the lines on
a report that have certain text.
Thanks
Chuck


Yahoo! Groups Sponsor

Click Here to Find Software Faster


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]
--- ## Post #101 by @system
I export reports to excel and access, is there anyway to compare on
file to another to see the changes.
Thanks
Chuck
--- ## Post #102 by @system
Does anybody have a report that combines the General Ledger Report with the
Inventory/WIP Account Reconcilliation Report? It's cumbersome to have to
keep bouncing between the two reports to see GL account activity.

Thank-you in advance
Linda
--- ## Post #103 by @system
I am creating a report where in the filter I am specifying a date range.
How would I get that date range to show up in the report header as part of
the title?

Erica A. Steffens
System Administrator
Jerneen Micro Medical Technologies Inc.
ESteffens@...
--- ## Post #104 by @system
Try the following. I keep this as a notepad file and cut/paste into cacal
and agregate fields each time I need it. You might need to play with the
starting points for initial search. This is NOT based on the RANGE filter
because I don't use that for performance reasons. ! indicates a comment I
have included. Use FromDate and ToDate in heading.

-------------------------------------- text file
---------------------------------
PrtFilter = Report-Filter() ! (system function)

ParseFilter = Minimum(PrtFilter) ! must pass thru aggregate due to indirect
use of function

! In the following adjust the starting point (60) as needed depending on the
filters
! and the position of the first date test

Start-From: INDEX(ParseFilter,'equal to',60) + 9
Start-To: INDEX(ParseFilter,'equal to',Start-From) + 9
FromDate: SUBSTRING(ParseFilter,Start-From,10)
ToDate: SUBSTRING(ParseFilter,Start-to,10)
-----------------------------end text
------------------------------------------

Todd C.
Harvey Vogel Mfg. Co.



-----Original Message-----
From: Erica Steffens [mailto:ESteffens@...]
Sent: Thursday, March 08, 2001 3:42 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder


I am creating a report where in the filter I am specifying a date range.
How would I get that date range to show up in the report header as part of
the title?

Erica A. Steffens
System Administrator
Jerneen Micro Medical Technologies Inc.
ESteffens@...



Yahoo! Groups Sponsor

<http://rd.yahoo.com/M=162801.1342103.2934627/D=egroupmail/S=1700007183:N/A=
599088/*http://www.knowledgestorm.com/jump_white.html?c=Yahoo&n=eLert_Comput
ersInternet_Software_WhiteGridTime&t=ad> Click Here to Find Software Faster
Click Here to Find Software Faster

<http://us.adserver.yahoo.com/l?M=162801.1342103.2934627/D=egroupmail/S=1700
007183:N/A=599088/rand=735212547>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #105 by @system
Erica
I include the report filter in the summary section of my reports. That
would include the date and other filter information. To do this I
create a calculated field "Filter" = ReportFilter( ) and then insert it in
the summary.

I also include a field that has the path and report name. When
someone comes in and says this report says "This report is wrong." I
have a starting point.

HTH

RRD



On 8 Mar 2001, at 15:41, Erica Steffens wrote:

I am creating a report where in the filter I am
specifying a date range.
How would I get that date range to show up in the
report header as part of
the title?

Erica A. Steffens
System Administrator
Jerneen Micro Medical Technologies Inc.
ESteffens@...



Russ Dover
IS Manager
Weaver Industries, Inc.
717 336 7507 phone
717 336 4182 fax
rdover@...
www.weaverind.com
--- ## Post #106 by @system
Need some help from all the Report Builder gurus.

Writing a report which links the InvcMisc table to the InvcHead table in order to subtract the InvcMisc.MiscAmt field from the InvcHead.InvoiceAmt field if the InvcMisc.MiscCode is 'S&H' or 'FREI'.

I am also gathering costs from the InvcDtl table using the Unit cost fields.

However, if there are 2 or more entries in the InvcMisc table for the InvcHead entry, then I get 2 or more detail records, thereby inflating my costs by a factor of 2 or more.

If I try filtering out all but the 'S&H' and 'FREI' codes, then I miss any other invoices which have miscellaneous charges. Is there a way to determine if there are more than 1 InvcMisc entries for a Invchead entry?

Thanks.

Jerry Brunner
Quala-Die, Inc.
1250 Brusselles Street
St. Marys, PA 15857
814.781.6280


[Non-text portions of this message have been removed]
--- ## Post #107 by @system
I have used a multi step process to get around this. First create a Sum
where Count ExtPrice Reset by Line(I think...you will have to play around
with how you have it grouped). Then create a Function which says if Count
is = 1, then ExtPrice, else 0. Then your next Sum is to Total your new
function. (when I create an alter-ego of a field name I put a 'f' in front
of the name...kinda like faux ExtPrice...would be labled fExtPrice) Another
Function needs to be created to make all the Counts > 1 to be equal to Zero.
Once you are certain that you have all the above totaling correctly, go into
your line properties to suppress all 0's with that field name.

Sorry this isn't better written...but I'm buried in our Fiscal Year end.
Hope this helps...it took me months of learning RB to come up with it.

-----Original Message-----
From: Jerry Brunner [SMTP:jerry-qualadie@...]
Sent: Tuesday, March 13, 2001 10:50 AM
To: Vantage
Subject: [Vantage] Report Builder

Need some help from all the Report Builder gurus.

Writing a report which links the InvcMisc table to the InvcHead
table in order to subtract the InvcMisc.MiscAmt field from the
InvcHead.InvoiceAmt field if the InvcMisc.MiscCode is 'S&H' or 'FREI'.

I am also gathering costs from the InvcDtl table using the Unit cost
fields.

However, if there are 2 or more entries in the InvcMisc table for
the InvcHead entry, then I get 2 or more detail records, thereby inflating
my costs by a factor of 2 or more.

If I try filtering out all but the 'S&H' and 'FREI' codes, then I
miss any other invoices which have miscellaneous charges. Is there a way to
determine if there are more than 1 InvcMisc entries for a Invchead entry?

Thanks.

Jerry Brunner
Quala-Die, Inc.
1250 Brusselles Street
St. Marys, PA 15857
814.781.6280


[Non-text portions of this message have been removed]


------------------------ Yahoo! Groups Sponsor



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
--- ## Post #108 by @system
Jerry,

We were looking for the same thing. You have to look at it more than one
may. To get the total Misc. charge on an invoice the we did an aggregate
calculation that is Total(TotalMiscChrg, InvoiceNum, InvoiceLine, Pre-pass)
this calculation is put on an Group header line for InvoiceNum. If you want
the freight charges backed out of the Total Invoice Amount you need to
create another couple of calculated fields. Our freight codes begin with
"SH" so we did a calculated field called SH were IF(misc code begins
"SH",1,2) then do a calculated field SHVALUE IF(SH = 1,MiscAmt,0) this gives
value only when the SH is equal to 1. Then do an aggregate calcution called
TOTSHVAL Total(SHVALUE, InvoiceNum, Every, Pre-pass) . You can now subtract
that field from the Invoice Amount to give you the invoice amount less
shipping. What you have to watch for is grouping and sorting. You really
need to look at each invoice number as a group not a record. HTH.

Jim Frice

-----Original Message-----
From: Jerry Brunner [mailto:jerry-qualadie@...]
Sent: Tuesday, March 13, 2001 10:50 AM
To: Vantage
Subject: [Vantage] Report Builder

Need some help from all the Report Builder gurus.

Writing a report which links the InvcMisc table to the InvcHead table in
order to subtract the InvcMisc.MiscAmt field from the InvcHead.InvoiceAmt
field if the InvcMisc.MiscCode is 'S&H' or 'FREI'.

I am also gathering costs from the InvcDtl table using the Unit cost fields.

However, if there are 2 or more entries in the InvcMisc table for the
InvcHead entry, then I get 2 or more detail records, thereby inflating my
costs by a factor of 2 or more.

If I try filtering out all but the 'S&H' and 'FREI' codes, then I miss any
other invoices which have miscellaneous charges. Is there a way to
determine if there are more than 1 InvcMisc entries for a Invchead entry?

Thanks.

Jerry Brunner
Quala-Die, Inc.
1250 Brusselles Street
St. Marys, PA 15857
814.781.6280


[Non-text portions of this message have been removed]





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--- ## Post #109 by @system
Jerry
I think the link should be InvHed to InvDtl using company and
InvNum. The InvDtl to InvMisc using company, InvNum and
InvLine. Make that join a "left outer" so you get InvDtl records that
don't have Misc charges. Once you have a left outer join don't filter
on the right table(s) (in this case InvMisc) or the left outer closes to
an inner. The only records that get through the filter have an
InvMisc record.

If you want to aggregate InvDtl fields sort and group on InvNum and
InvLine. Then use the "Options" button when setting up the
aggregate to accumulate with every InvLine. Your calculations can
be done in the group footer.

For the Misc records instead of using a filter use a calculated field
that has "IIF(MiscCode = "S&H" OR MiscCode = "FREI",
MiscAmt, 0 )" in the formula. When you total this per InvLine or
InvNum you should get the numbers you're looking for.


On 13 Mar 2001, at 11:49, Jerry Brunner wrote:

Need some help from all the Report Builder gurus.

Writing a report which links the InvcMisc table to the
InvcHead table in order to subtract the
InvcMisc.MiscAmt field from the InvcHead.InvoiceAmt
field if the InvcMisc.MiscCode is 'S&H' or 'FREI'.

I am also gathering costs from the InvcDtl table using
the Unit cost fields.

However, if there are 2 or more entries in the
InvcMisc table for the InvcHead entry, then I get 2 or
more detail records, thereby inflating my costs by a
factor of 2 or more.

If I try filtering out all but the 'S&H' and 'FREI'
codes, then I miss any other invoices which have
miscellaneous charges. Is there a way to determine if
there are more than 1 InvcMisc entries for a Invchead
entry?

Thanks.

Jerry Brunner
Quala-Die, Inc.
1250 Brusselles Street
St. Marys, PA 15857
814.781.6280


[Non-text portions of this message have been removed]



Russ Dover
IS Manager
Weaver Industries, Inc.
717 336 7507 phone
717 336 4182 fax
rdover@...
www.weaverind.com
--- ## Post #110 by @system
I run a product for comparing files called "Visual Difference" it is by
Mortice Kern Systems Inc. and it is in their "MKS Tool Kit" product. Its
great for comparing reports and for comparing vantage source code files for
maintaining your mods or looking at patches.

Patrick
sSc Specialty Screw Corp.

-----Original Message-----
From: chuck_metcalf@... [mailto:chuck_metcalf@...]
Sent: Thursday, March 08, 2001 9:59 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder


I export reports to excel and access, is there anyway to compare on
file to another to see the changes.
Thanks
Chuck





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--- ## Post #111 by @system
Thank You

-----Original Message-----
From: Winter, Patrick [mailto:pjw@...]
Sent: Wednesday, March 14, 2001 8:10 AM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Report Builder


I run a product for comparing files called "Visual Difference" it is by
Mortice Kern Systems Inc. and it is in their "MKS Tool Kit" product. Its
great for comparing reports and for comparing vantage source code files for
maintaining your mods or looking at patches.

Patrick
sSc Specialty Screw Corp.

-----Original Message-----
From: chuck_metcalf@... [mailto:chuck_metcalf@...]
Sent: Thursday, March 08, 2001 9:59 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder


I export reports to excel and access, is there anyway to compare on
file to another to see the changes.
Thanks
Chuck





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--- ## Post #112 by @system
Patrick
Can you compare Excel Files
Chuck

-----Original Message-----
From: Winter, Patrick [mailto:pjw@...]
Sent: Wednesday, March 14, 2001 8:10 AM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Report Builder


I run a product for comparing files called "Visual Difference" it is by
Mortice Kern Systems Inc. and it is in their "MKS Tool Kit" product. Its
great for comparing reports and for comparing vantage source code files for
maintaining your mods or looking at patches.

Patrick
sSc Specialty Screw Corp.

-----Original Message-----
From: chuck_metcalf@... [mailto:chuck_metcalf@...]
Sent: Thursday, March 08, 2001 9:59 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder


I export reports to excel and access, is there anyway to compare on
file to another to see the changes.
Thanks
Chuck





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--- ## Post #113 by @system
No, I also checked AutoVue's compare feature but it doesn't work for excel.

-----Original Message-----
From: Charles Metcalf [mailto:chuck_metcalf@...]
Sent: Wednesday, March 14, 2001 11:31 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder


Patrick
Can you compare Excel Files
Chuck

-----Original Message-----
From: Winter, Patrick [mailto:pjw@...]
Sent: Wednesday, March 14, 2001 8:10 AM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Report Builder


I run a product for comparing files called "Visual Difference" it is by
Mortice Kern Systems Inc. and it is in their "MKS Tool Kit" product. Its
great for comparing reports and for comparing vantage source code files for
maintaining your mods or looking at patches.

Patrick
sSc Specialty Screw Corp.

-----Original Message-----
From: chuck_metcalf@... [mailto:chuck_metcalf@...]
Sent: Thursday, March 08, 2001 9:59 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder


I export reports to excel and access, is there anyway to compare on
file to another to see the changes.
Thanks
Chuck





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/





Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--- ## Post #114 by @system
Thanks to all who answered my last question!

Now for an easy one. Is there a way to insert variable text into the header of a report. I am specifically thinking of text such as "Report Date from xx/xx/xx to xx/xx/xx.

Thanks.

Jerry Brunner
Quala-Die, Inc.
1250 Brusselles Street
St. Marys, PA 15857
814.781.6280


[Non-text portions of this message have been removed]
--- ## Post #115 by @system
What we generally do is put the date as the first
field in the filter, and then create a formula field for
the Filter. Then put that field at the top or bottom of
the report, and format it only to show the number of
characters that display the date.

Tim Care
Electro Chemical Finishing
----- Original Message -----
From: "Jerry Brunner" <jerry-qualadie@...>
To: "Vantage" <vantage@yahoogroups.com>
Sent: Thursday, March 15, 2001 10:14 AM
Subject: [Vantage] Report Builder


> Thanks to all who answered my last question!
>
> Now for an easy one. Is there a way to insert variable text into the
header of a report. I am specifically thinking of text such as "Report Date
from xx/xx/xx to xx/xx/xx.
>
> Thanks.
>
> Jerry Brunner
> Quala-Die, Inc.
> 1250 Brusselles Street
> St. Marys, PA 15857
> 814.781.6280
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
--- ## Post #116 by @system
Jerry,

Another possibility is to use the minimum and maximum aggregate calculation
say on the invoice date. The problem with this is if you are using period as
a filter and someone backdates something but posts to the current period.
HTH.

Jim Frice

> -----Original Message-----
> From: Jerry Brunner [mailto:jerry-qualadie@...]
> Sent: Thursday, March 15, 2001 9:15 AM
> To: Vantage
> Subject: [Vantage] Report Builder
>
>
> Thanks to all who answered my last question!
>
> Now for an easy one. Is there a way to insert variable text into
> the header of a report. I am specifically thinking of text such
> as "Report Date from xx/xx/xx to xx/xx/xx.
>
> Thanks.
>
> Jerry Brunner
> Quala-Die, Inc.
> 1250 Brusselles Street
> St. Marys, PA 15857
> 814.781.6280
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
--- ## Post #117 by @system
I set up calculated fields like "Today() - 45" and then filter or fill
buckets on those fields. If you put those fields in the header with the
right text you should have what you want.

On 15 Mar 2001, at 10:14, Jerry Brunner wrote:

Thanks to all who answered my last question!

Now for an easy one. Is there a way to insert
variable text into the header of a report. I am
specifically thinking of text such as "Report Date
from xx/xx/xx to xx/xx/xx.

Thanks.

Jerry Brunner
Quala-Die, Inc.
1250 Brusselles Street
St. Marys, PA 15857
814.781.6280


[Non-text portions of this message have been removed]



Russ Dover
IS Manager
Weaver Industries, Inc.
717 336 7507 phone
717 336 4182 fax
rdover@...
www.weaverind.com
--- ## Post #118 by @system
What field do I put on the report builder to identify the person that
printed the report.

Thanks

Chuck
--- ## Post #119 by @system
Does anyone in the group have a procedure on building a menu item from
reports built in RB??
I look forward to any insight.


Vantage 5.0
NTSBS
Win 98se Workstations


Best Regards,

Pablo Garza
Dix Metals, Inc.

pgarza@...
--- ## Post #120 by @system
Do you mean that you want to have a report builder report be a menu item in Vantage?

Troy Funte
Liberty Electronics

----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 2:34 PM
Subject: [Vantage] Report Builder


Does anyone in the group have a procedure on building a menu item from
reports built in RB??
I look forward to any insight.


Vantage 5.0
NTSBS
Win 98se Workstations


Best Regards,

Pablo Garza
Dix Metals, Inc.

pgarza@...




Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]
--- ## Post #121 by @system
Troy,

To answer your question-yes, If I build a custom report in RB, I want my
users to have access to launch the report form their workstation.

Pablo
Dix Metals

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Tuesday, October 09, 2001 12:14 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


Do you mean that you want to have a report builder report be a menu item in
Vantage?

Troy Funte
Liberty Electronics

----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 2:34 PM
Subject: [Vantage] Report Builder


Does anyone in the group have a procedure on building a menu item from
reports built in RB??
I look forward to any insight.


Vantage 5.0
NTSBS
Win 98se Workstations


Best Regards,

Pablo Garza
Dix Metals, Inc.

pgarza@...




Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
83:HM/A=812074/R=0/*http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
0>

<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
l/S=1705007183:HM/A=812074/rand=159469690>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #122 by @system
There is, of course, the custom report links section in various places in Vantage. This is fairly simple to set up. If you want a single report listed as an item on a menu, someone else will have to speak to that one. I do know it's possible. Lastly, there are some 'home grown' progress routines on the egroups list that could allow you to run a report on a user's workstation from an icon on their desktop. Three ways to go.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 3:17 PM
Subject: RE: [Vantage] Report Builder


Troy,

To answer your question-yes, If I build a custom report in RB, I want my
users to have access to launch the report form their workstation.

Pablo
Dix Metals

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Tuesday, October 09, 2001 12:14 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


Do you mean that you want to have a report builder report be a menu item in
Vantage?

Troy Funte
Liberty Electronics

----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 2:34 PM
Subject: [Vantage] Report Builder


Does anyone in the group have a procedure on building a menu item from
reports built in RB??
I look forward to any insight.


Vantage 5.0
NTSBS
Win 98se Workstations


Best Regards,

Pablo Garza
Dix Metals, Inc.

pgarza@...




Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
83:HM/A=812074/R=0/*http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
0>

<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
l/S=1705007183:HM/A=812074/rand=159469690>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]
--- ## Post #123 by @system
The custom reports link sounds interesting and may serve our purposes. What
are the mechanics of set-up??

Pablo Garza

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Tuesday, October 09, 2001 12:34 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


There is, of course, the custom report links section in various places in
Vantage. This is fairly simple to set up. If you want a single report
listed as an item on a menu, someone else will have to speak to that one. I
do know it's possible. Lastly, there are some 'home grown' progress
routines on the egroups list that could allow you to run a report on a
user's workstation from an icon on their desktop. Three ways to go.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 3:17 PM
Subject: RE: [Vantage] Report Builder


Troy,

To answer your question-yes, If I build a custom report in RB, I want my
users to have access to launch the report form their workstation.

Pablo
Dix Metals

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Tuesday, October 09, 2001 12:14 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


Do you mean that you want to have a report builder report be a menu item
in
Vantage?

Troy Funte
Liberty Electronics

----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 2:34 PM
Subject: [Vantage] Report Builder


Does anyone in the group have a procedure on building a menu item from
reports built in RB??
I look forward to any insight.


Vantage 5.0
NTSBS
Win 98se Workstations


Best Regards,

Pablo Garza
Dix Metals, Inc.

pgarza@...




Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

<
http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
>
83:HM/A=812074/R=0/*
http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
<http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300>
0>

<
http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
>
l/S=1705007183:HM/A=812074/rand=159469690>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> >
.




[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
83:HM/A=812074/R=0/*http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
0>

<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
l/S=1705007183:HM/A=812074/rand=323741937>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #124 by @system
Custom Report Links in Vantage:
Add to "Custom Report Links".
You can run them from there. (Down side they are all grouped together, none
secured out.)

If you want to put them on the menu you may want to call Tech Support, they
should have a document on this otherwise:
Basically under menu structure maintenance:
MENU ID: The number you assign. (I started with UDC9000, UDC9001, etc...)
NAME: (Will automatically populate from selecting the report at the bottom.)
Parent Menu ID: (Menu folder you want the report in.)
Order Sequence: (Use a high number like 8000 series, and space by 10's so
you can insert a report later.)
Security ID: (Select the Vantage security code the report will fall under.
You can also create your own.)
Program: (Select Custom Report Link, and pick your report, will update NAME:
field above.)

I have added over 600 reports with security to the report folders under each
module using this method. If you add a lot you may want a report builder
report to list all the menu structure additions to know what your next MENU
ID: number is.

Hope this helps.

Patrick Winter
sSc Specialty Screw Corporation
Vantage 5.00.317, Progress 9.1a


-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Tuesday, October 09, 2001 2:34 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


There is, of course, the custom report links section in various places in
Vantage. This is fairly simple to set up. If you want a single report
listed as an item on a menu, someone else will have to speak to that one. I
do know it's possible. Lastly, there are some 'home grown' progress
routines on the egroups list that could allow you to run a report on a
user's workstation from an icon on their desktop. Three ways to go.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 3:17 PM
Subject: RE: [Vantage] Report Builder


Troy,

To answer your question-yes, If I build a custom report in RB, I want my
users to have access to launch the report form their workstation.

Pablo
Dix Metals

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Tuesday, October 09, 2001 12:14 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


Do you mean that you want to have a report builder report be a menu item
in
Vantage?

Troy Funte
Liberty Electronics

----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 2:34 PM
Subject: [Vantage] Report Builder


Does anyone in the group have a procedure on building a menu item from
reports built in RB??
I look forward to any insight.


Vantage 5.0
NTSBS
Win 98se Workstations


Best Regards,

Pablo Garza
Dix Metals, Inc.

pgarza@...




Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor


<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071

83:HM/A=812074/R=0/*http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
0>


<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
l/S=1705007183:HM/A=812074/rand=159469690>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--- ## Post #125 by @system
Setting Up Custom Report Links:
In nearly all of the Vantage Menu categories, there is a Master File Maintenance menu. Under the Master File Maintenance, you will find a "Custom Report Links" item. Double-click it. Here is where your users will find reports that you set up.

To add a report, click EDIT/ADD. Enter any Report ID you want and a Description. Then enter the Library (.prl) path and then select a report from the those listed in the .prl file. Click the "Change Report Filters" if you want the user to be able to change those. Click OK

Now the report is listed under the Custom Report Links and users can run them from inside Vantage.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 3:29 PM
Subject: RE: [Vantage] Report Builder


The custom reports link sounds interesting and may serve our purposes. What
are the mechanics of set-up??

Pablo Garza

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Tuesday, October 09, 2001 12:34 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


There is, of course, the custom report links section in various places in
Vantage. This is fairly simple to set up. If you want a single report
listed as an item on a menu, someone else will have to speak to that one. I
do know it's possible. Lastly, there are some 'home grown' progress
routines on the egroups list that could allow you to run a report on a
user's workstation from an icon on their desktop. Three ways to go.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 3:17 PM
Subject: RE: [Vantage] Report Builder


Troy,

To answer your question-yes, If I build a custom report in RB, I want my
users to have access to launch the report form their workstation.

Pablo
Dix Metals

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Tuesday, October 09, 2001 12:14 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


Do you mean that you want to have a report builder report be a menu item
in
Vantage?

Troy Funte
Liberty Electronics

----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 2:34 PM
Subject: [Vantage] Report Builder


Does anyone in the group have a procedure on building a menu item from
reports built in RB??
I look forward to any insight.


Vantage 5.0
NTSBS
Win 98se Workstations


Best Regards,

Pablo Garza
Dix Metals, Inc.

pgarza@...




Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

<
http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
>
83:HM/A=812074/R=0/*
http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
<http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300>
0>

<
http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
>
l/S=1705007183:HM/A=812074/rand=159469690>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> >
.




[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
83:HM/A=812074/R=0/*http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
0>

<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
l/S=1705007183:HM/A=812074/rand=323741937>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]
--- ## Post #126 by @system
Is there anything I need to do with the vantage.ini or progress.ini files to
ensure the path??

Pablo

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Tuesday, October 09, 2001 12:52 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


Setting Up Custom Report Links:
In nearly all of the Vantage Menu categories, there is a Master File
Maintenance menu. Under the Master File Maintenance, you will find a
"Custom Report Links" item. Double-click it. Here is where your users will
find reports that you set up.

To add a report, click EDIT/ADD. Enter any Report ID you want and a
Description. Then enter the Library (.prl) path and then select a report
from the those listed in the .prl file. Click the "Change Report Filters"
if you want the user to be able to change those. Click OK

Now the report is listed under the Custom Report Links and users can run
them from inside Vantage.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 3:29 PM
Subject: RE: [Vantage] Report Builder


The custom reports link sounds interesting and may serve our purposes.
What
are the mechanics of set-up??

Pablo Garza

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Tuesday, October 09, 2001 12:34 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


There is, of course, the custom report links section in various places in
Vantage. This is fairly simple to set up. If you want a single report
listed as an item on a menu, someone else will have to speak to that one.
I
do know it's possible. Lastly, there are some 'home grown' progress
routines on the egroups list that could allow you to run a report on a
user's workstation from an icon on their desktop. Three ways to go.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 3:17 PM
Subject: RE: [Vantage] Report Builder


Troy,

To answer your question-yes, If I build a custom report in RB, I want my
users to have access to launch the report form their workstation.

Pablo
Dix Metals

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Tuesday, October 09, 2001 12:14 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


Do you mean that you want to have a report builder report be a menu item
in
Vantage?

Troy Funte
Liberty Electronics

----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 2:34 PM
Subject: [Vantage] Report Builder


Does anyone in the group have a procedure on building a menu item from
reports built in RB??
I look forward to any insight.


Vantage 5.0
NTSBS
Win 98se Workstations


Best Regards,

Pablo Garza
Dix Metals, Inc.

pgarza@...




Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> > >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> > >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> > >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

<

http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
>
<
http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
>
>
83:HM/A=812074/R=0/*
http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
<http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300>
< http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
<http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300> >
0>

<

http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
>
<
http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
>
>
l/S=1705007183:HM/A=812074/rand=159469690>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> > >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> > >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> > >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/>
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> > >
.




[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

<
http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
>
83:HM/A=812074/R=0/*
http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
<http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300>
0>

<
http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
>
l/S=1705007183:HM/A=812074/rand=323741937>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> >
.




[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
83:HM/A=812075/R=0/*http://www.verisign.com/cgi-bin/go.cgi?a=b17834980005700
0>

<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
l/S=1705007183:HM/A=812075/rand=590373457>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #127 by @system
Enter them as ud/?????.prl so if you upgrade or change the client mappings
you will not have to revisit these.

Patrick

-----Original Message-----
From: Pablo Garza [mailto:pgarza@...]
Sent: Tuesday, October 09, 2001 2:46 PM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Report Builder


Is there anything I need to do with the vantage.ini or progress.ini files to
ensure the path??

Pablo

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Tuesday, October 09, 2001 12:52 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


Setting Up Custom Report Links:
In nearly all of the Vantage Menu categories, there is a Master File
Maintenance menu. Under the Master File Maintenance, you will find a
"Custom Report Links" item. Double-click it. Here is where your users will
find reports that you set up.

To add a report, click EDIT/ADD. Enter any Report ID you want and a
Description. Then enter the Library (.prl) path and then select a report
from the those listed in the .prl file. Click the "Change Report Filters"
if you want the user to be able to change those. Click OK

Now the report is listed under the Custom Report Links and users can run
them from inside Vantage.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 3:29 PM
Subject: RE: [Vantage] Report Builder


The custom reports link sounds interesting and may serve our purposes.
What
are the mechanics of set-up??

Pablo Garza

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Tuesday, October 09, 2001 12:34 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


There is, of course, the custom report links section in various places in
Vantage. This is fairly simple to set up. If you want a single report
listed as an item on a menu, someone else will have to speak to that one.
I
do know it's possible. Lastly, there are some 'home grown' progress
routines on the egroups list that could allow you to run a report on a
user's workstation from an icon on their desktop. Three ways to go.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 3:17 PM
Subject: RE: [Vantage] Report Builder


Troy,

To answer your question-yes, If I build a custom report in RB, I want my
users to have access to launch the report form their workstation.

Pablo
Dix Metals

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Tuesday, October 09, 2001 12:14 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


Do you mean that you want to have a report builder report be a menu item
in
Vantage?

Troy Funte
Liberty Electronics

----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 2:34 PM
Subject: [Vantage] Report Builder


Does anyone in the group have a procedure on building a menu item from
reports built in RB??
I look forward to any insight.


Vantage 5.0
NTSBS
Win 98se Workstations


Best Regards,

Pablo Garza
Dix Metals, Inc.

pgarza@...




Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> > >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> > >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> > >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

<

http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
>
<
http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
>
>
83:HM/A=812074/R=0/*
http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
<http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300>
< http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
<http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300> >
0>

<

http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
>
<
http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
>
>
l/S=1705007183:HM/A=812074/rand=159469690>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> > >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> > >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> > >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/>
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> > >
.




[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

<
http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
>
83:HM/A=812074/R=0/*
http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
<http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300>
0>

<
http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
>
l/S=1705007183:HM/A=812074/rand=323741937>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> >
.




[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
83:HM/A=812075/R=0/*http://www.verisign.com/cgi-bin/go.cgi?a=b17834980005700
0>

<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
l/S=1705007183:HM/A=812075/rand=590373457>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--- ## Post #128 by @system
You don't need to worry about the vantage.ini or progress.ini files. You just need to know where your Custom Report Libraries are located. Vantage recommends keeping these in one location, usually in x:\epic50\vantage\ud
(ud stands for User Directory). But you can put your .prl files anywhere you'd like really.

Troy Funte
Liberty Electronics
----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 3:45 PM
Subject: RE: [Vantage] Report Builder


Is there anything I need to do with the vantage.ini or progress.ini files to
ensure the path??

Pablo

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Tuesday, October 09, 2001 12:52 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


Setting Up Custom Report Links:
In nearly all of the Vantage Menu categories, there is a Master File
Maintenance menu. Under the Master File Maintenance, you will find a
"Custom Report Links" item. Double-click it. Here is where your users will
find reports that you set up.

To add a report, click EDIT/ADD. Enter any Report ID you want and a
Description. Then enter the Library (.prl) path and then select a report
from the those listed in the .prl file. Click the "Change Report Filters"
if you want the user to be able to change those. Click OK

Now the report is listed under the Custom Report Links and users can run
them from inside Vantage.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 3:29 PM
Subject: RE: [Vantage] Report Builder


The custom reports link sounds interesting and may serve our purposes.
What
are the mechanics of set-up??

Pablo Garza

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Tuesday, October 09, 2001 12:34 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


There is, of course, the custom report links section in various places in
Vantage. This is fairly simple to set up. If you want a single report
listed as an item on a menu, someone else will have to speak to that one.
I
do know it's possible. Lastly, there are some 'home grown' progress
routines on the egroups list that could allow you to run a report on a
user's workstation from an icon on their desktop. Three ways to go.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 3:17 PM
Subject: RE: [Vantage] Report Builder


Troy,

To answer your question-yes, If I build a custom report in RB, I want my
users to have access to launch the report form their workstation.

Pablo
Dix Metals

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Tuesday, October 09, 2001 12:14 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


Do you mean that you want to have a report builder report be a menu item
in
Vantage?

Troy Funte
Liberty Electronics

----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 2:34 PM
Subject: [Vantage] Report Builder


Does anyone in the group have a procedure on building a menu item from
reports built in RB??
I look forward to any insight.


Vantage 5.0
NTSBS
Win 98se Workstations


Best Regards,

Pablo Garza
Dix Metals, Inc.

pgarza@...




Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> > >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> > >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> > >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

<

http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
>
<
http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
>
>
83:HM/A=812074/R=0/*
http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
<http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300>
< http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
<http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300> >
0>

<

http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
>
<
http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
>
>
l/S=1705007183:HM/A=812074/rand=159469690>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> > >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> > >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> > >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/>
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> > >
.




[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

<
http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
>
83:HM/A=812074/R=0/*
http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
<http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300>
0>

<
http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
>
l/S=1705007183:HM/A=812074/rand=323741937>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> >
.




[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
83:HM/A=812075/R=0/*http://www.verisign.com/cgi-bin/go.cgi?a=b17834980005700
0>

<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
l/S=1705007183:HM/A=812075/rand=590373457>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]
--- ## Post #129 by @system
Troy and Patrick,

Thank you for your valued insight. We are new to Vantage and still
struggling with some basics.


Pablo Garza
Dix Metals, Inc

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Tuesday, October 09, 2001 1:01 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


You don't need to worry about the vantage.ini or progress.ini files. You
just need to know where your Custom Report Libraries are located. Vantage
recommends keeping these in one location, usually in x:\epic50\vantage\ud
(ud stands for User Directory). But you can put your .prl files anywhere
you'd like really.

Troy Funte
Liberty Electronics
----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 3:45 PM
Subject: RE: [Vantage] Report Builder


Is there anything I need to do with the vantage.ini or progress.ini files
to
ensure the path??

Pablo

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Tuesday, October 09, 2001 12:52 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


Setting Up Custom Report Links:
In nearly all of the Vantage Menu categories, there is a Master File
Maintenance menu. Under the Master File Maintenance, you will find a
"Custom Report Links" item. Double-click it. Here is where your users
will
find reports that you set up.

To add a report, click EDIT/ADD. Enter any Report ID you want and a
Description. Then enter the Library (.prl) path and then select a report
from the those listed in the .prl file. Click the "Change Report Filters"
if you want the user to be able to change those. Click OK

Now the report is listed under the Custom Report Links and users can run
them from inside Vantage.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 3:29 PM
Subject: RE: [Vantage] Report Builder


The custom reports link sounds interesting and may serve our purposes.
What
are the mechanics of set-up??

Pablo Garza

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Tuesday, October 09, 2001 12:34 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


There is, of course, the custom report links section in various places
in
Vantage. This is fairly simple to set up. If you want a single report
listed as an item on a menu, someone else will have to speak to that
one.
I
do know it's possible. Lastly, there are some 'home grown' progress
routines on the egroups list that could allow you to run a report on a
user's workstation from an icon on their desktop. Three ways to go.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 3:17 PM
Subject: RE: [Vantage] Report Builder


Troy,

To answer your question-yes, If I build a custom report in RB, I want
my
users to have access to launch the report form their workstation.

Pablo
Dix Metals

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Tuesday, October 09, 2001 12:14 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


Do you mean that you want to have a report builder report be a menu
item
in
Vantage?

Troy Funte
Liberty Electronics

----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 2:34 PM
Subject: [Vantage] Report Builder


Does anyone in the group have a procedure on building a menu item
from
reports built in RB??
I look forward to any insight.


Vantage 5.0
NTSBS
Win 98se Workstations


Best Regards,

Pablo Garza
Dix Metals, Inc.

pgarza@...




Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
have already linked your email address to a yahoo id to enable access.
)
(1) To access the Files Section of our Yahoo!Group for Report
Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> > >
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> > > >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> > >
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> > > >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> > >
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> > > >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.




[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

<


http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
>
<
http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
>
>
<

http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
>
<
http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
>
>
>
83:HM/A=812074/R=0/*
http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
<http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300>
< http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
<http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300> >
< http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
<http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300>
< http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
<http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300> > >
0>

<


http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
>
<
http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
>
>
<

http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
>
<
http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
>
>
>
l/S=1705007183:HM/A=812074/rand=159469690>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> > >
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> > > >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> > >
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> > > >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> > >
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> > > >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
< http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/> < http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/> >
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> <
http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> > > >
.




[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> > >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> > >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> > >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

<

http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
>
<
http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
>
>
83:HM/A=812074/R=0/*
http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
<http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300>
< http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
<http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300> >
0>

<

http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
>
<
http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
>
>
l/S=1705007183:HM/A=812074/rand=323741937>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> > >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> > >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> > >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/>
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> > >
.




[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

<
http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
>
83:HM/A=812075/R=0/*
http://www.verisign.com/cgi-bin/go.cgi?a=b17834980005700
<http://www.verisign.com/cgi-bin/go.cgi?a=b17834980005700>
0>

<
http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
>
l/S=1705007183:HM/A=812075/rand=590373457>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> >
.




[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
83:HM/A=812075/R=0/*http://www.verisign.com/cgi-bin/go.cgi?a=b17834980005700
0>

<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
l/S=1705007183:HM/A=812075/rand=907112881>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #130 by @system
I've been there. Glad to help.

Troy

----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 4:34 PM
Subject: RE: [Vantage] Report Builder


Troy and Patrick,

Thank you for your valued insight. We are new to Vantage and still
struggling with some basics.


Pablo Garza
Dix Metals, Inc

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Tuesday, October 09, 2001 1:01 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


You don't need to worry about the vantage.ini or progress.ini files. You
just need to know where your Custom Report Libraries are located. Vantage
recommends keeping these in one location, usually in x:\epic50\vantage\ud
(ud stands for User Directory). But you can put your .prl files anywhere
you'd like really.

Troy Funte
Liberty Electronics
----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 3:45 PM
Subject: RE: [Vantage] Report Builder


Is there anything I need to do with the vantage.ini or progress.ini files
to
ensure the path??

Pablo

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Tuesday, October 09, 2001 12:52 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


Setting Up Custom Report Links:
In nearly all of the Vantage Menu categories, there is a Master File
Maintenance menu. Under the Master File Maintenance, you will find a
"Custom Report Links" item. Double-click it. Here is where your users
will
find reports that you set up.

To add a report, click EDIT/ADD. Enter any Report ID you want and a
Description. Then enter the Library (.prl) path and then select a report
from the those listed in the .prl file. Click the "Change Report Filters"
if you want the user to be able to change those. Click OK

Now the report is listed under the Custom Report Links and users can run
them from inside Vantage.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 3:29 PM
Subject: RE: [Vantage] Report Builder


The custom reports link sounds interesting and may serve our purposes.
What
are the mechanics of set-up??

Pablo Garza

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Tuesday, October 09, 2001 12:34 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


There is, of course, the custom report links section in various places
in
Vantage. This is fairly simple to set up. If you want a single report
listed as an item on a menu, someone else will have to speak to that
one.
I
do know it's possible. Lastly, there are some 'home grown' progress
routines on the egroups list that could allow you to run a report on a
user's workstation from an icon on their desktop. Three ways to go.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 3:17 PM
Subject: RE: [Vantage] Report Builder


Troy,

To answer your question-yes, If I build a custom report in RB, I want
my
users to have access to launch the report form their workstation.

Pablo
Dix Metals

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Tuesday, October 09, 2001 12:14 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


Do you mean that you want to have a report builder report be a menu
item
in
Vantage?

Troy Funte
Liberty Electronics

----- Original Message -----
From: Pablo Garza
To: 'vantage@yahoogroups.com'
Sent: Tuesday, October 09, 2001 2:34 PM
Subject: [Vantage] Report Builder


Does anyone in the group have a procedure on building a menu item
from
reports built in RB??
I look forward to any insight.


Vantage 5.0
NTSBS
Win 98se Workstations


Best Regards,

Pablo Garza
Dix Metals, Inc.

pgarza@...




Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
have already linked your email address to a yahoo id to enable access.
)
(1) To access the Files Section of our Yahoo!Group for Report
Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> > >
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> > > >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> > >
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> > > >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> > >
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> > > >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.




[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

<


http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
>
<
http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
>
>
<

http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
>
<
http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
>
>
>
83:HM/A=812074/R=0/*
http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
<http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300>
< http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
<http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300> >
< http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
<http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300>
< http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
<http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300> > >
0>

<


http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
>
<
http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
>
>
<

http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
>
<
http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
>
>
>
l/S=1705007183:HM/A=812074/rand=159469690>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> > >
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> > > >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> > >
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> > > >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> > >
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> > > >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
< http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/> < http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/> >
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> <
http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> > > >
.




[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> > >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> > >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> > >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

<

http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
>
<
http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
>
>
83:HM/A=812074/R=0/*
http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
<http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300>
< http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300
<http://www.verisign.com/cgi-bin/go.cgi?a=b15334027000300> >
0>

<

http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
>
<
http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
>
>
l/S=1705007183:HM/A=812074/rand=323741937>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> > >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> > >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> > >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/>
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> > >
.




[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

<
http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
>
83:HM/A=812075/R=0/*
http://www.verisign.com/cgi-bin/go.cgi?a=b17834980005700
<http://www.verisign.com/cgi-bin/go.cgi?a=b17834980005700>
0>

<
http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
>
l/S=1705007183:HM/A=812075/rand=590373457>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.> >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
< http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages> >
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
< http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links> >

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> >
.




[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

<http://rd.yahoo.com/M=212180.1660613.3195489.1269402/D=egroupweb/S=17050071
83:HM/A=812075/R=0/*http://www.verisign.com/cgi-bin/go.cgi?a=b17834980005700
0>

<http://us.adserver.yahoo.com/l?M=212180.1660613.3195489.1269402/D=egroupmai
l/S=1705007183:HM/A=812075/rand=907112881>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yaho --- ## Post #131 by @system
Hey all!

Trying to create my first Report Builder report! UGH! :)

Trying to create an aggregate field which will sum all the invoices for a
customer for a specified time period (via the filter). Can't figure out how
to get it to reset for each customer.

Thanks for any and all help!

Tricia Simon
Riten Industries, Inc.
740-335-5353, ext 205
--- ## Post #132 by @system
Tricia,

Make sure you group by customer. This will make customer show up in the
"Reset every..." dialogue box in the aggregate field. Select reset every
customer and it will work.

Jon Hellebuyck
Stremel Manufacturing
-----Original Message-----
From:
sentto-20369-24886-1003868786-jhellebuyck=stremel.com@...
[mailto:sentto-20369-24886-1003868786-jhellebuyck=stremel.com@...
t.com]On Behalf Of Tricia Simon
Sent: Tuesday, October 23, 2001 3:27 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder


Hey all!

Trying to create my first Report Builder report! UGH! :)

Trying to create an aggregate field which will sum all the invoices for a
customer for a specified time period (via the filter). Can't figure out
how
to get it to reset for each customer.

Thanks for any and all help!

Tricia Simon
Riten Industries, Inc.
740-335-5353, ext 205


Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]
--- ## Post #133 by @system
Could someone please guide me in the right direction - What table contains
the field for comments that were tied to the sales order line and not the
header?

Thanks
Linda
--- ## Post #134 by @system
OrderDtl
-----Original Message-----
From:
sentto-20369-24907-1004016593-jhellebuyck=stremel.com@...
[mailto:sentto-20369-24907-1004016593-jhellebuyck=stremel.com@...
t.com]On Behalf Of Linda Furio
Sent: Thursday, October 25, 2001 8:29 AM
To: 'vantage@yahoogroups.com'
Subject: [Vantage] Report Builder




Could someone please guide me in the right direction - What table contains
the field for comments that were tied to the sales order line and not the
header?

Thanks
Linda


Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]
--- ## Post #135 by @system
OrderDtl.OrderComment
Patrick Winter
sSc Specialty Screw Corporation
Vantage 5.00.317, Progress 9.1a


-----Original Message-----
From: Linda Furio [mailto:lindafurio@...]
Sent: Thursday, October 25, 2001 8:29 AM
To: 'vantage@yahoogroups.com'
Subject: [Vantage] Report Builder




Could someone please guide me in the right direction - What table contains
the field for comments that were tied to the sales order line and not the
header?

Thanks
Linda



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--- ## Post #136 by @system
Thank you for your guidance with the sales order comments field. :)

Linda
--- ## Post #137 by @system
Can anyone tell me how to modify a Report Builder report to include a
specific company database? Here is the background.

I have three sites that are in one database. Two of them are in one company
and the other is a seperate company. I would like to be able to select
which company with a filter so that the report only looks at the specific
company selected.

Roy Bosworth
Senior Manager IT/MIS
818-503-8100
`.....??`...><(((,o>?
--- ## Post #138 by @system
Roy,

Create a top-level filter using the COMPANY field of your report's
master table. The filter value should be the company code,
enclosed in single or double-quotes. You should also always sort
on company, even if your database contains only one company. This
keeps your searches chugging along the right index.

have fun,
john


> -----Original Message-----
> From: Roy Bosworth
> Sent: Tuesday, October 30, 2001 12:46 PM
> To: 'vantage@yahoogroups.com'
> Subject: [Vantage] Report Builder
--- ## Post #139 by @system
Insert this in your filter as the first line: tablename.company =
desiredcompanycode

Note that you can improve performance by designing future reports with
"Company" as the master table and then join the table(s) of interest from
that point. Most Vantage tables have the Company code in the primary field
in the indices. When you include the Company table in your dataset, there is
a high degree of likelyhood that RB will be able to use the indices
effectively.

Jim Stetter
Snow FIltration
-----Original Message-----
From: Roy Bosworth [mailto:royb@...]
Sent: Tuesday, October 30, 2001 3:46 PM
To: 'vantage@yahoogroups.com'
Subject: [Vantage] Report Builder


Can anyone tell me how to modify a Report Builder report to include a
specific company database? Here is the background.

I have three sites that are in one database. Two of them are in one
company
and the other is a seperate company. I would like to be able to select
which company with a filter so that the report only looks at the specific
company selected.

Roy Bosworth
Senior Manager IT/MIS
818-503-8100
`.....??`...><(((,o>?





[Non-text portions of this message have been removed]
--- ## Post #140 by @system
Roy,

Every table in Vantage has a field called "Company." This is the identifier
you're looking for. As an added performance tip, use it as the first
element in your filter (this will cause the report engine to try to use
indexes, which can dramatically decrease the time it takes to run the
report).

As far as what to use specifically in the filter, use the company ID number
listed in company maintenance (for example, if Company XYZ has an ID of
'01', and you want Labor Detail records, use LaborDtl.Company = '01' in your
filter).

Jon Hellebuyck
Stremel Manufacturing

-----Original Message-----
From:
sentto-20369-25102-1004474188-jhellebuyck=stremel.com@...
[mailto:sentto-20369-25102-1004474188-jhellebuyck=stremel.com@...
t.com]On Behalf Of Roy Bosworth
Sent: Tuesday, October 30, 2001 2:46 PM
To: 'vantage@yahoogroups.com'
Subject: [Vantage] Report Builder


Can anyone tell me how to modify a Report Builder report to include a
specific company database? Here is the background.

I have three sites that are in one database. Two of them are in one
company
and the other is a seperate company. I would like to be able to select
which company with a filter so that the report only looks at the specific
company selected.

Roy Bosworth
Senior Manager IT/MIS
818-503-8100
`.....??`...><(((,o>?



Yahoo! Groups Sponsor



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]
--- ## Post #141 by @system
Thanks to all of your responses. Works great. It's been a while since
working with RB.

Thanks again

Roy Bosworth
Senior Manager IT/MIS
818-503-8100
`.....??`...><(((,o>?


-----Original Message-----
From: Jim Stetter [mailto:jimstetter@...]
Sent: Tuesday, October 30, 2001 12:47 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder


Insert this in your filter as the first line: tablename.company =
desiredcompanycode

Note that you can improve performance by designing future reports with
"Company" as the master table and then join the table(s) of interest from
that point. Most Vantage tables have the Company code in the primary field
in the indices. When you include the Company table in your dataset, there is
a high degree of likelyhood that RB will be able to use the indices
effectively.

Jim Stetter
Snow FIltration
-----Original Message-----
From: Roy Bosworth [mailto:royb@...]
Sent: Tuesday, October 30, 2001 3:46 PM
To: 'vantage@yahoogroups.com'
Subject: [Vantage] Report Builder


Can anyone tell me how to modify a Report Builder report to include a
specific company database? Here is the background.

I have three sites that are in one database. Two of them are in one
company
and the other is a seperate company. I would like to be able to select
which company with a filter so that the report only looks at the specific
company selected.

Roy Bosworth
Senior Manager IT/MIS
818-503-8100
`.....??`...><(((,o>?





[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--- ## Post #142 by @system
Is the field used in Part Advisor to show if a part has been built
before usable in report builder, and if yes, where is it located.
Thanks
Chuck
--- ## Post #143 by @system
I was under the impression that there is no field that sets the Part Advisor
buttons. I figured that in the "Have I Run It Before?" (for example)
actually does a query on the JobHead table looking for closed jobs matching
that part number. If records found > 0, enable that button. "Have I Quoted
It Before?" probably does the same thing with the QuoteDtl table.

This is just a hunch, as I've never seen any booleans (true/false) fields in
the Part table that would give you this information. Anyone know for sure?

Jon Hellebuyck
Stremel Manufacturing
-----Original Message-----
From:
sentto-20369-25255-1004712294-jhellebuyck=stremel.com@....c
om
[mailto:sentto-20369-25255-1004712294-jhellebuyck=stremel.com@...
.yahoo.com]On Behalf Of chuck_metcalf@...
Sent: Friday, November 02, 2001 8:45 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder


Is the field used in Part Advisor to show if a part has been built
before usable in report builder, and if yes, where is it located.
Thanks
Chuck


Yahoo! Groups Sponsor
ADVERTISEMENT




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]
--- ## Post #144 by @system
Good Afternoon,

Does anyone in this group have an order backlog report or a resource to
build one? We are having some difficulty tracking partial shipments.


Pablo Garza
Dix Metals, Inc
Huntington Beach, CA
--- ## Post #145 by @system
I am trying to write a report where I need to identify the first character
of an alpha-numeric string (e.g. '011-text') - which is actually a product
group code entered into a VB Form character field.

I want to create a calculated field which will read the first character and
can then be used for grouping purposes to create a report analysing sales by
product groups.

I know I could write a nested iif or case statement, but I want it to work
when some clown adds a further group, without having to rewrite the report,
and also I have about 100 cases!.

Anyone got any ideas? Under normal circumstances, Left (string,1) would
work wonders, but Progress doesn't appear to support this!


Best Regards,

Paul Whittle
Quality Assurance Manager
Jiskoot Autocontrol Ltd.
Tunbridge Wells, Kent TN1 2DJ, UK
Tel +44 (0)1892 518000
Fax +44 (0)1892 518100
www.jiskoot.com
--- ## Post #146 by @system
Try the substring command. I use this for something that I believe is
similar to what you are trying to do. We preface our job numbers with a
letter for different type of work and then in my report I create a
calculated field: SUBSTRING(JobNum,1,1) and sort and group by this field so
I can total for the different 'types' of jobs.



[Non-text portions of this message have been removed]
--- ## Post #147 by @system
Paul, Substring command will do this.

-----Original Message-----
From: Paul Whittle [mailto:pwhittle@...]
Sent: Monday, January 28, 2002 12:54 PM
To: Vantage
Subject: [Vantage] Report Builder


I am trying to write a report where I need to identify the first character
of an alpha-numeric string (e.g. '011-text') - which is actually a product
group code entered into a VB Form character field.

I want to create a calculated field which will read the first character and
can then be used for grouping purposes to create a report analysing sales by
product groups.

I know I could write a nested iif or case statement, but I want it to work
when some clown adds a further group, without having to rewrite the report,
and also I have about 100 cases!.

Anyone got any ideas? Under normal circumstances, Left (string,1) would
work wonders, but Progress doesn't appear to support this!


Best Regards,

Paul Whittle
Quality Assurance Manager
Jiskoot Autocontrol Ltd.
Tunbridge Wells, Kent TN1 2DJ, UK
Tel +44 (0)1892 518000
Fax +44 (0)1892 518100
www.jiskoot.com



Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/M=218512.1856015.3360178.1269402/D=egroupweb/S=17050071
83:HM/A=928902/R=0/*http://ad.doubleclick.net/clk;3788030;6800959;r%3fhttp:/
/www.verisign.com/cgi-bin/go.cgi?a=b229573240057000>

<http://us.adserver.yahoo.com/l?M=218512.1856015.3360178.1269402/D=egroupmai
l/S=1705007183:HM/A=928902/rand=427297571>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #148 by @system
Does anyone have a report that will show inventory that has not moved
in the last 12 months. Any help would be greatly appreciated.

mailto: chuck_metcalf@...

Thank You

Chuck
--- ## Post #149 by @system
Chuck,

Check the files section on Yahoo
(http://groups.yahoo.com/group/vantage/files/). Under the report builder
section you will find non moving, and under Crystal reports you can find On
Hand Aging. They might do the trick for you...

Paul

-----Original Message-----
From: chuck_metcalf [mailto:chuck_metcalf@...]
Sent: Friday, February 08, 2002 11:55 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder


Does anyone have a report that will show inventory that has not moved
in the last 12 months. Any help would be greatly appreciated.

mailto: chuck_metcalf@...

Thank You

Chuck



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--- ## Post #150 by @system
Hi,

I am a new vantage user and I am having some trouble trying to create
a specific report, and was wondering if someone might be able to
help? I am trying to create a report that will show me quantity on
hand less the inventory used to fill orders.

Thank in advance,

Mark Smith
Innerpac, Inc
--- ## Post #151 by @system
--- In vantage@y..., "innerpac_il" <mark_smith@i...> wrote:
> Hi,
>
> I am a new vantage user and I am having some trouble trying to
create
> a specific report, and was wondering if someone might be able to
> help? I am trying to create a report that will show me quantity on
> hand less the inventory used to fill orders.
>
> Thank in advance,
>
> Mark Smith
> Innerpac, Inc

Hi Mark,
Do you want a report that lists the items like this?
Part 123456 Total On Hand 10 Allocated to jobs 5 Balance available 5

If so, join the PartWhse table to the PartBin table
PartWhse holds the allocated quantity and PartBin holds the quantity
on hand. Then aggregate these quantities in case you have parts in
more then one bin/warehouse. Group on Part number, create a band line
for the part number and put the pn and aggregate fields on the band
line. If you want the total remining available just make a calculated
field subtracting the aggregate fields total allocated qty from the
total on hand. You can then just delete the record line so your
report is only printing the band line items for a 1 line per part
report.I hope this helps.

Shirley
--- ## Post #152 by @system
Do you have a similar report you would be willing to share?

Thanks,

Mark Smith
IT Manager
Innerpac, Inc.
(708) 863-8300

-----Original Message-----
From: saslats [mailto:saslats@...]
Sent: Wednesday, March 06, 2002 11:12 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: Report Builder

--- In vantage@y..., "innerpac_il" <mark_smith@i...> wrote:
> Hi,
>
> I am a new vantage user and I am having some trouble trying to
create
> a specific report, and was wondering if someone might be able to
> help? I am trying to create a report that will show me quantity on
> hand less the inventory used to fill orders.
>
> Thank in advance,
>
> Mark Smith
> Innerpac, Inc

Hi Mark,
Do you want a report that lists the items like this?
Part 123456 Total On Hand 10 Allocated to jobs 5 Balance available 5

If so, join the PartWhse table to the PartBin table
PartWhse holds the allocated quantity and PartBin holds the quantity
on hand. Then aggregate these quantities in case you have parts in
more then one bin/warehouse. Group on Part number, create a band line
for the part number and put the pn and aggregate fields on the band
line. If you want the total remining available just make a calculated
field subtracting the aggregate fields total allocated qty from the
total on hand. You can then just delete the record line so your
report is only printing the band line items for a 1 line per part
report.I hope this helps.

Shirley




Yahoo! Groups Sponsor
ADVERTISEMENT

<http://rd.yahoo.com/M=215002.1818248.3328688.1261774/D=egroupweb/S=17050071
83:HM/A=847665/R=0/*http://ads.x10.com/?bHlhaG9vbW9uc3RlcjcuZGF0=1015434779%
3eM=215002.1818248.3328688.1261774/D=egroupweb/S=1705007183:HM/A=847665/R=1>


Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .


[Non-text portions of this message have been removed]
--- ## Post #153 by @system
--- In vantage@y..., "Mark Smith" <mark_smith@i...> wrote:
> Do you have a similar report you would be willing to share?
>
> Thanks,
>
> Mark Smith
> IT Manager
> Innerpac, Inc.
> (708) 863-8300
> [Non-text portions of this message have been removed]
Mark report is in progress reports folder. title is AllocatedParts. I
replied earlier but don't see it in the posts. Must have messed it up
somehow.

shirley
--- ## Post #154 by @system
Per data dictionary viewer in version 5.1...In the table PartWhse use the
fields OnHandQty and AllocQty. I haven't used the SalesAllocQty or the
JobAllocQty...instinct says they should total the AllocQty if you need them
split.

-----Original Message-----
From: innerpac_il [mailto:mark_smith@...]
Sent: Wednesday, March 06, 2002 9:56 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder

Hi,

I am a new vantage user and I am having some trouble trying
to create
a specific report, and was wondering if someone might be
able to
help? I am trying to create a report that will show me
quantity on
hand less the inventory used to fill orders.

Thank in advance,

Mark Smith
Innerpac, Inc


------------------------ Yahoo! Groups Sponsor

Useful links for the Yahoo!Groups Vantage Board are: ( Note:
You must have already linked your email address to a yahoo id to enable
access. )
(1) To access the Files Section of our Yahoo!Group for
Report Builder and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services
goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
--- ## Post #155 by @system
--- In vantage@y..., "innerpac_il" <mark_smith@i...> wrote:
> Mike,
>
>I will attempt my first upload. The report will be in
Files/Progress Reports. The title is AllocatedParts.prl. It is set up
for only one of our warehouses. Delete the warehouse filter line to
run all warehouses and get the true counts if your parts are in
multiple warehouses and bins.I left the detail record line on the
report so you can verify that you're getting the correct information.
Just delete the record line for a report of totals only.

Regards
Shirley Slattery
Wood Group Pratt & Whitney
--- ## Post #156 by @system
Thanks, I'll look for it!

Mark Smith
IT Manager
Innerpac, Inc.
(708) 863-8300

-----Original Message-----
From: saslats [mailto:saslats@...]
Sent: Wednesday, March 06, 2002 7:32 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: Report Builder

--- In vantage@y..., "Mark Smith" <mark_smith@i...> wrote:
> Do you have a similar report you would be willing to share?
>
> Thanks,
>
> Mark Smith
> IT Manager
> Innerpac, Inc.
> (708) 863-8300
> [Non-text portions of this message have been removed]
Mark report is in progress reports folder. title is AllocatedParts. I
replied earlier but don't see it in the posts. Must have messed it up
somehow.

shirley




Yahoo! Groups Sponsor
ADVERTISEMENT

<http://rd.yahoo.com/M=215002.1818248.3328688.1261774/D=egroupweb/S=17050071
83:HM/A=847665/R=0/*http://ads.x10.com/?bHlhaG9vbW9uc3RlcjcuZGF0=1015465117%
3eM=215002.1818248.3328688.1261774/D=egroupweb/S=1705007183:HM/A=847665/R=1>


Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .


[Non-text portions of this message have been removed]
--- ## Post #157 by @system
Is it possible to do a for last join instead of a for each join in report
builder?


Thanks in advance for your help.


Scott Hemmerlein

Information Systems Manager
Sommer Metalcraft Corp
315 Poston Drive
Crawfordsville, IN 47933

voice 765 359-4258
fax 765 359-4201

www.sommermetalcraft.com

e-mail hemmerls@...
--- ## Post #158 by @system
How do you mean? What's the context?

-----Original Message-----
From: Scott Hemmerlein [mailto:hemmerls@...]
Sent: Friday, March 15, 2002 10:29 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder Joins [SMC WIRE FABRICATORS]



Is it possible to do a for last join instead of a for each join in report
builder?


Thanks in advance for your help.


Scott Hemmerlein

Information Systems Manager
Sommer Metalcraft Corp
315 Poston Drive
Crawfordsville, IN 47933

voice 765 359-4258
fax 765 359-4201

www.sommermetalcraft.com

e-mail hemmerls@...


Yahoo! Groups Sponsor
ADVERTISEMENT




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]
--- ## Post #159 by @system
Given that I am working about 1/2 speed today for some reason forgive me if
this does not make much sense.

I am trying to write a report that uses the selling price from the last
order for a part. I want to link that to or quaintly on hand. If I use the
for each join that report builder uses by defalult, when I sum up the on
hand quantityies in each bin I am also sum that on hand quantity for each
order. So if I have had 52 orders for a part I get an on hand quantity 52x
the actual quantity.

You can do a for last join in the export utility. This seems to match the
data in on table with the last matching record in the joined to table...
exactly what I need.

-----Original Message-----
From: Jon Hellebuyck [mailto:jhellebuyck@...]
Sent: Friday, March 15, 2002 12:05 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder Joins [SMC WIRE FABRICATORS]


How do you mean? What's the context?

-----Original Message-----
From: Scott Hemmerlein [mailto:hemmerls@...]
Sent: Friday, March 15, 2002 10:29 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder Joins [SMC WIRE FABRICATORS]



Is it possible to do a for last join instead of a for each join in report
builder?


Thanks in advance for your help.


Scott Hemmerlein

Information Systems Manager
Sommer Metalcraft Corp
315 Poston Drive
Crawfordsville, IN 47933

voice 765 359-4258
fax 765 359-4201

www.sommermetalcraft.com

e-mail hemmerls@...


Yahoo! Groups Sponsor
ADVERTISEMENT




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--- ## Post #160 by @system
Couldn't the PREVIOUS (fieldname) function give you the last value a field?
I use this often to "look back" after a group change. Or you can group on
your current "record" level and in the group footing the value should be
from the last record seen. Or did I misunderstand the question?
-Todd C.

-----Original Message-----
From: Scott Hemmerlein [mailto:hemmerls@...]
Sent: Friday, March 15, 2002 12:15 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder Joins [SMC WIRE FABRICATORS]


Given that I am working about 1/2 speed today for some reason forgive me if
this does not make much sense.

I am trying to write a report that uses the selling price from the last
order for a part. I want to link that to or quaintly on hand. If I use the
for each join that report builder uses by defalult, when I sum up the on
hand quantityies in each bin I am also sum that on hand quantity for each
order. So if I have had 52 orders for a part I get an on hand quantity 52x
the actual quantity.

You can do a for last join in the export utility. This seems to match the
data in on table with the last matching record in the joined to table...
exactly what I need.

-----Original Message-----
From: Jon Hellebuyck [mailto:jhellebuyck@...]
Sent: Friday, March 15, 2002 12:05 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder Joins [SMC WIRE FABRICATORS]


How do you mean? What's the context?

-----Original Message-----
From: Scott Hemmerlein [mailto:hemmerls@...]
Sent: Friday, March 15, 2002 10:29 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder Joins [SMC WIRE FABRICATORS]



Is it possible to do a for last join instead of a for each join in report
builder?


Thanks in advance for your help.


Scott Hemmerlein

Information Systems Manager
Sommer Metalcraft Corp
315 Poston Drive
Crawfordsville, IN 47933

voice 765 359-4258
fax 765 359-4201

www.sommermetalcraft.com

e-mail hemmerls@...


Yahoo! Groups Sponsor
ADVERTISEMENT




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>






Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/M=215002.1818248.3328688.1261774/D=egroupweb/S=17050071
83:HM/A=847665/R=0/*http://ads.x10.com/?bHlhaG9vbW9uc3RlcjcuZGF0=1016216053%
3eM=215002.1818248.3328688.1261774/D=egroupweb/S=1705007183:HM/A=847665/R=1>


<http://us.adserver.yahoo.com/l?M=215002.1818248.3328688.1261774/D=egroupmai
l/S=1705007183:HM/A=847665/rand=420898202>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #161 by @system
I've had to do this very thing a few times and accomplished it a couple of
different ways.

If you've got "Group By" groups set up, you can set an aggregate field to
only add to itself when the group changes (different than the "Reset on"
option). You have to expand the aggregate dialogue box to see this option.

Another way to accomplish this is to set an aggregate field to find the max
order date, reseting itself every part number. Make sure this aggregate
field is prepass. Then, set a calculated field with something like this:

IIF(max_order_date = Orderhead.OrderDate, OnHandQty, 0)

Then set up another aggregate field to total this calculated field (again,
resetting every part number). This field should give you just the one
ocurrence. If you had two orders on the same date, this setup won't work,
but it's easily fixed. Just have a field that counts ocurrences of the max
date (this will play out as a calculated field that shows 1 if it matches, 0
if it doesn't, then an aggregate field to total the 1's (which is the same
as a count), then divide your total on-hand by that number).

This might not seem too straight forward, and given the expertise on
OneList, someone might be able to do it in an easier way, but this is how I
did it. Let me know if you have questions.

Jon Hellebuyck
Stremel Manufacturing
jhellebuyck@...

-----Original Message-----
From: Scott Hemmerlein [mailto:hemmerls@...]
Sent: Friday, March 15, 2002 12:15 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder Joins [SMC WIRE FABRICATORS]


Given that I am working about 1/2 speed today for some reason forgive me
if
this does not make much sense.

I am trying to write a report that uses the selling price from the last
order for a part. I want to link that to or quaintly on hand. If I use
the
for each join that report builder uses by defalult, when I sum up the on
hand quantityies in each bin I am also sum that on hand quantity for each
order. So if I have had 52 orders for a part I get an on hand quantity
52x
the actual quantity.

You can do a for last join in the export utility. This seems to match the
data in on table with the last matching record in the joined to table...
exactly what I need.

-----Original Message-----
From: Jon Hellebuyck [mailto:jhellebuyck@...]
Sent: Friday, March 15, 2002 12:05 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder Joins [SMC WIRE FABRICATORS]


How do you mean? What's the context?

-----Original Message-----
From: Scott Hemmerlein [mailto:hemmerls@...]
Sent: Friday, March 15, 2002 10:29 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder Joins [SMC WIRE FABRICATORS]



Is it possible to do a for last join instead of a for each join in
report
builder?


Thanks in advance for your help.


Scott Hemmerlein

Information Systems Manager
Sommer Metalcraft Corp
315 Poston Drive
Crawfordsville, IN 47933

voice 765 359-4258
fax 765 359-4201

www.sommermetalcraft.com

e-mail hemmerls@...


Yahoo! Groups Sponsor
ADVERTISEMENT




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/





Yahoo! Groups Sponsor
ADVERTISEMENT




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]
--- ## Post #162 by @system
I have been asked to create a report that will list customer name,
and first order date (only). Not sure how to only filter
first 'order date' alone.

-Mark Smith
--- ## Post #163 by @system
Mark,
�
One way would be to list all orders, sort by part, then from last to first
ship date.� Create a band line footer for ship date, then move the records
to this band line and suppress the record band.
�
This should give you what they want.
�
Dan

-----Original Message-----
From: innerpac_il [mailto:mark_smith@...]
Sent: Thursday, April 04, 2002 9:15 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder


I have been asked to create a report that will list customer name,
and first order date (only).� Not sure how to only filter
first 'order date' alone.

-Mark Smith



Yahoo! Groups Sponsor
ADVERTISEMENT
HYPERLINK
"http://rd.yahoo.com/M=215002.1954253.3462811.1261774/D=egroupweb/S=17050071
83:HM/A=1000239/R=0/*http://ads.x10.com/?bHlhaG9vaG0xLmRhd=1017929711%3eM=21
5002.1954253.3462811.1261774/D=egroupweb/S=1705007183:HM/A=1000239/R=1"
HYPERLINK
"http://us.adserver.yahoo.com/l?M=215002.1954253.3462811.1261774/D=egroupmai
l/S=1705007183:HM/A=1000239/rand=698774588"

Useful links for the Yahoo!Groups Vantage Board are: ( Note:� You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto: HYPERLINK
"http://groups.yahoo.com/group/vantage/files/."http://groups.yahoo.com/group
/vantage/files/.�
(2) To search through old msg's goto: HYPERLINK
"http://groups.yahoo.com/group/vantage/messages"http://groups.yahoo.com/grou
p/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: HYPERLINK
"http://groups.yahoo.com/group/vantage/links"http://groups.yahoo.com/group/v
antage/links

Your use of Yahoo! Groups is subject to the HYPERLINK
"http://docs.yahoo.com/info/terms/"Yahoo! Terms of Service.



---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.343 / Virus Database: 190 - Release Date: 3/22/2002



---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.343 / Virus Database: 190 - Release Date: 3/22/2002



[Non-text portions of this message have been removed]
--- ## Post #164 by @system
Mark,
Sort by Name and group by Name. Then create a band line for the group Name.
Create an aggregate field for the minimum OrderDate, reset at each Name.
Create an aggregate field for the maximum Name, no reset. Insert these
aggregate fields in the new band line. Create a calculated field called
skip (or whatever), where the expression is Name='skip'. Double click the
record line and check enable conditional printing for 'skip' and check print
when true. This will print the customer name only once and along with the
oldest order date.

Kara
> -----Original Message-----
> From: innerpac_il [SMTP:mark_smith@...]
> Sent: Thursday, April 04, 2002 9:15 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Report Builder
>
> I have been asked to create a report that will list customer name,
> and first order date (only). Not sure how to only filter
> first 'order date' alone.
>
> -Mark Smith
>
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
> <http://rd.yahoo.com/M=215002.1954253.3462811.1261774/D=egroupweb/S=170500
> 7183:HM/A=1000239/R=0/*http://ads.x10.com/?bHlhaG9vaG0xLmRhd=1017929711%3e
> M=215002.1954253.3462811.1261774/D=egroupweb/S=1705007183:HM/A=1000239/R=1
> >
>
> <http://us.adserver.yahoo.com/l?M=215002.1954253.3462811.1261774/D=egroupm
> ail/S=1705007183:HM/A=1000239/rand=698774588>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> <http://groups.yahoo.com/group/vantage/files/.>
> (2) To search through old msg's goto:
> <http://groups.yahoo.com/group/vantage/messages>
> (3) To view links to Vendors that provide Vantage services goto:
> <http://groups.yahoo.com/group/vantage/links>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/>.
--- ## Post #165 by @system
You don't need the customer name aggregate or the skip. You only have to
put the customer name in the footer band line and under 'Properties' /
'Record Layout', click 'suppress al record lines' and the customer name will
only print once in the band along with the minimum date aggregate.



[Non-text portions of this message have been removed]
--- ## Post #166 by @system
Thanks Sarah. I see I've been doing unneeded steps. -Kara

> -----Original Message-----
> From: sarah.vareschi@... [SMTP:sarah.vareschi@...]
> Sent: Thursday, April 04, 2002 9:49 AM
> To: vantage@yahoogroups.com
> Subject: RE: [Vantage] Report Builder
>
> You don't need the customer name aggregate or the skip. You only have to
> put the customer name in the footer band line and under 'Properties' /
> 'Record Layout', click 'suppress al record lines' and the customer name
> will
> only print once in the band along with the minimum date aggregate.
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
> <http://rd.yahoo.com/M=215002.1954253.3462811.1261774/D=egroupweb/S=170500
> 7183:HM/A=1000239/R=0/*http://ads.x10.com/?bHlhaG9vaG0xLmRhd=1017931219%3e
> M=215002.1954253.3462811.1261774/D=egroupweb/S=1705007183:HM/A=1000239/R=1
> >
>
> <http://us.adserver.yahoo.com/l?M=215002.1954253.3462811.1261774/D=egroupm
> ail/S=1705007183:HM/A=1000239/rand=988003013>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> <http://groups.yahoo.com/group/vantage/files/.>
> (2) To search through old msg's goto:
> <http://groups.yahoo.com/group/vantage/messages>
> (3) To view links to Vendors that provide Vantage services goto:
> <http://groups.yahoo.com/group/vantage/links>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/>.
--- ## Post #167 by @system
Sarah,

Thanks very much for your help! I have built my report as you instructed,
but it seems to be taking an awfully long time to process. When I create my
aggregate field I am setting value to min and pointing it at the
OrderDate.OrderHed Table. Can you think of any reason why it would take so
long to process? I am certain it's user error.

Thanks,

Mark Smith
IT Manager
Innerpac, Inc.
(708) 863-8300

-----Original Message-----
From: sarah.vareschi@... [mailto:sarah.vareschi@...]
Sent: Thursday, April 04, 2002 8:49 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder

You don't need the customer name aggregate or the skip. You only have to
put the customer name in the footer band line and under 'Properties' /
'Record Layout', click 'suppress al record lines' and the customer name will
only print once in the band along with the minimum date aggregate.



[Non-text portions of this message have been removed]




Yahoo! Groups Sponsor
ADVERTISEMENT

<http://rd.yahoo.com/M=215002.1954253.3462811.1261774/D=egroupweb/S=17050071
83:HM/A=1000239/R=0/*http://ads.x10.com/?bHlhaG9vaG0xLmRhd=1017931219%3eM=21
5002.1954253.3462811.1261774/D=egroupweb/S=1705007183:HM/A=1000239/R=1>


Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .


[Non-text portions of this message have been removed]
--- ## Post #168 by @system
I created a quick test report, with join ..

customer.company -> orderhed.company
customer.custnum -> orderhed.custnum

Sorted/grouped by customer.name ascending, then orderhed.orderdate
descending. No Filter. Placed customer.name, orderhed.ordernum and
orderhed.orderdate on customer.name band line. Deleted record band
line. It ran in less than 3 minutes on a 4 GB database.

I think the key is following an index in the join to OrderHed.

HTH

Lonnie

--- In vantage@y..., "Mark Smith" <mark_smith@i...> wrote:
> Sarah,
>
> Thanks very much for your help! I have built my report as you
instructed,
> but it seems to be taking an awfully long time to process. When I
create my
> aggregate field I am setting value to min and pointing it at the
> OrderDate.OrderHed Table. Can you think of any reason why it would
take so
> long to process? I am certain it's user error.
>
> Thanks,
>
> Mark Smith
> IT Manager
> Innerpac, Inc.
> (708) 863-8300
>
> -----Original Message-----
> From: sarah.vareschi@n... [mailto:sarah.vareschi@n...]
> Sent: Thursday, April 04, 2002 8:49 AM
> To: vantage@y...
> Subject: RE: [Vantage] Report Builder
>
> You don't need the customer name aggregate or the skip. You only
have to
> put the customer name in the footer band line and
under 'Properties' /
> 'Record Layout', click 'suppress al record lines' and the customer
name will
> only print once in the band along with the minimum date aggregate.
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
<http://rd.yahoo.com/M=215002.1954253.3462811.1261774/D=egroupweb/S=17
050071
> 83:HM/A=1000239/R=0/*http://ads.x10.com/?
bHlhaG9vaG0xLmRhd=1017931219%3eM=21
>
5002.1954253.3462811.1261774/D=egroupweb/S=1705007183:HM/A=1000239/R=1
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/> .
>
>
> [Non-text portions of this message have been removed]
--- ## Post #169 by @system
Hi all,

I have something to share with anyone interested in it!

I use Report Builder for a number of reports that look through too much data for equivalent Crystal/ODBC report to run quickly enough. As most will know, RB reports are pretty fast, but don't provide a simple and easy way to ask the user for parameters - I don't like them fiddling around with the report filters, because the average user doesn't understand the syntax and doesn't WANT to understand it either!

There is a neat way around this though! I now use small Progress 4GL programs to present the user with a little dialogue box that asks for those parameters, then calls up the appropriate report and runs it - from the user's point of view it's very simple and safe! It takes a little working out if you're unfamiliar with 4GL, but it's NOT DIFFICULT, and it works very well!

I've posted a small (14k) file on www.ripley-eng.co.uk (the Vantage tab on the navigation bar) that contains a sample RB report, a 4GL program that calls it up, and a quick guide to making it work. Please take a look, you might find it useful! I would appreciate any comments about it very much, good or bad. I will post a slightly more complex example at some point too.

I have to say thanks very much to Lonnie Drew and Steve Sanders of the U.S. users' group for getting me started on using 4GL for this purpose - thanks guys!!

A reminder too that also on www.ripley-eng.co.uk are a number of Crystal Reports for the most important forms - P/O's, invoices, travellers, etc. - all v7 reports but soon to be updated to v8. And a common printed sheet design that all of the reports fit onto! Might save someone some designing time :-)

Thanks,

++ Andy Watts

++ Ripley Engineering Ltd
++ Tel: 01256-473940
++ Fax: 01256-479991
++ mailto: andy@...
--- ## Post #170 by @system
Do you need to have any programming tools to do programming in 4GL ?
I would really like to get going with 4GL but don't know where to start
from.

Mike Tonoyan / All American Products Co.


----- Original Message -----
From: "Andy Watts" <andy@...>
To: <vantage@yahoogroups.com>
Sent: Tuesday, April 16, 2002 1:39 AM
Subject: [Vantage] Report Builder


> Hi all,
>
> I have something to share with anyone interested in it!
>
> I use Report Builder for a number of reports that look through too much
data for equivalent Crystal/ODBC report to run quickly enough. As most will
know, RB reports are pretty fast, but don't provide a simple and easy way to
ask the user for parameters - I don't like them fiddling around with the
report filters, because the average user doesn't understand the syntax and
doesn't WANT to understand it either!
>
> There is a neat way around this though! I now use small Progress 4GL
programs to present the user with a little dialogue box that asks for those
parameters, then calls up the appropriate report and runs it - from the
user's point of view it's very simple and safe! It takes a little working
out if you're unfamiliar with 4GL, but it's NOT DIFFICULT, and it works very
well!
>
> I've posted a small (14k) file on www.ripley-eng.co.uk (the Vantage tab on
the navigation bar) that contains a sample RB report, a 4GL program that
calls it up, and a quick guide to making it work. Please take a look, you
might find it useful! I would appreciate any comments about it very much,
good or bad. I will post a slightly more complex example at some point too.
>
> I have to say thanks very much to Lonnie Drew and Steve Sanders of the
U.S. users' group for getting me started on using 4GL for this purpose -
thanks guys!!
>
> A reminder too that also on www.ripley-eng.co.uk are a number of Crystal
Reports for the most important forms - P/O's, invoices, travellers, etc. -
all v7 reports but soon to be updated to v8. And a common printed sheet
design that all of the reports fit onto! Might save someone some designing
time :-)
>
> Thanks,
>
> ++ Andy Watts
>
> ++ Ripley Engineering Ltd
> ++ Tel: 01256-473940
> ++ Fax: 01256-479991
> ++ mailto: andy@...
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
--- ## Post #171 by @system
At 08:53 AM 4/16/2002 -0700, you wrote:
>Do you need to have any programming tools to do programming in 4GL ? I
>would really like to get going with 4GL but don't know where to start from.

The Progress DB Server and network client software that come with Vantage
let you write and run any code, with the exception of things that write to
the DB. You can fire up the Procedure Editor from the Progress menu group,
or by opening the Vantage Command Window and typing editprog. If you
launch the procedure editor from Vantage, you will already have an active
connection to the DB.

All the 9.1 documentation is freely available at Progress' web site in PDF
form. There's one titled something like "Programming Tutorial for Windows"
that covers the plain vanilla 4GL. If you have ProVision, check out
"Application Development Environment - Getting Started."

Buying ProVision (~$5k) lets you run and compile programs that write to the
DB. It also gets you the AppBuilder, aka Application Development
Environment. This is a WYSIWYG tool for building screens like you see in
Vantage. Similar with any of the MS "Visual..." tools.

-Wayne Cox
--- ## Post #172 by @system
Wayne,

Thank you for the info.

Mike Tonoyan / All American Products Co.


----- Original Message -----
From: "Wayne Cox" <wmc20@...>
To: <vantage@yahoogroups.com>
Sent: Tuesday, April 16, 2002 10:48 AM
Subject: [Vantage] 4GL programming


> At 08:53 AM 4/16/2002 -0700, you wrote:
> >Do you need to have any programming tools to do programming in 4GL ? I
> >would really like to get going with 4GL but don't know where to start
from.
>
> The Progress DB Server and network client software that come with Vantage
> let you write and run any code, with the exception of things that write to
> the DB. You can fire up the Procedure Editor from the Progress menu
group,
> or by opening the Vantage Command Window and typing editprog. If you
> launch the procedure editor from Vantage, you will already have an active
> connection to the DB.
>
> All the 9.1 documentation is freely available at Progress' web site in PDF
> form. There's one titled something like "Programming Tutorial for
Windows"
> that covers the plain vanilla 4GL. If you have ProVision, check out
> "Application Development Environment - Getting Started."
>
> Buying ProVision (~$5k) lets you run and compile programs that write to
the
> DB. It also gets you the AppBuilder, aka Application Development
> Environment. This is a WYSIWYG tool for building screens like you see in
> Vantage. Similar with any of the MS "Visual..." tools.
>
> -Wayne Cox
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
--- ## Post #173 by @system
I have been working on report for last ½ day or so which will list my
customers, there ship to address and the last order shipped (to the shipto
address). I have linked customer to ordered, and customer to shipto with
customer as the master. I created a aggregate field called last order on
ordered.lastorder and sorted it by max. My issue is I can't get the report
to pull all of my customer's shipto address and order dates. I am not sure
what I am doing wrong. Any ideas?????

Mark Smith
IT Manager
Innerpac, Inc.
(708) 863-8300



[Non-text portions of this message have been removed]
--- ## Post #174 by @system
I am just starting out building reports using progress and have a couple of
questions for the experts out there.

1. In the Vantage description field we are putting information on
the second line.
Is there a way when printing reports to limit the description
so it does not print anything
from the second line? I've tried with the format option in
field properties but this does
not work.

2. When giving a user date ranges to input for report purposes, is
there a way to get the
dates selected by the user to print on the report?

Thanks in advance!!

Dynacast, Inc.
New Business Systems
195 Corporate Drive
Elgin, IL 60123

Phone (Cell) 864 275-3278
Direct Phone 864 595-2519

Pete Marston
--- ## Post #175 by @system
In answer to question 1, Look at the substring function you can use that to
designate some specifics as you descripe.
2. There is a function called RB_Filter.
Create a calculated field, called "Filter" then insert the RB_FILTER
function.

Shirley

-----Original Message-----
From: Pete Marston [mailto:pmarston@...]
Sent: Tuesday, August 27, 2002 10:37 AM
To: 'vantage@yahoogroups.com'
Subject: [Vantage] Report Builder


I am just starting out building reports using progress and have a couple
of
questions for the experts out there.

1. In the Vantage description field we are putting information on
the second line.
Is there a way when printing reports to limit the description
so it does not print anything
from the second line? I've tried with the format option in
field properties but this does
not work.

2. When giving a user date ranges to input for report purposes, is
there a way to get the
dates selected by the user to print on the report?

Thanks in advance!!

Dynacast, Inc.
New Business Systems
195 Corporate Drive
Elgin, IL 60123

Phone (Cell) 864 275-3278
Direct Phone 864 595-2519

Pete Marston


Yahoo! Groups Sponsor
ADVERTISEMENT



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]
--- ## Post #176 by @system
Can anyone tell me how to set it up to allow someone printing a report to chose any printer, instead of the "default printer" used when creating the report.

Thank You Very Much

Jim Horton
Mol-Son, Inc.
--- ## Post #177 by @system
Set the "default printer" used to create the report to be a name that no one
else uses. I call mine "Vantage" and no one else has a printer of this name
installed.
-----Original Message-----
From: Jim Horton [mailto:jim.horton@...]
Sent: Wednesday, 6 November 2002 7:42 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder


Can anyone tell me how to set it up to allow someone printing a report to
chose any printer, instead of the "default printer" used when creating the
report.

Thank You Very Much

Jim Horton
Mol-Son, Inc.
--- ## Post #178 by @system
Jim,

If you click off the print preview first, then run report, it should give you a selection of printers set up for vantage or the network.
dennis
----- Original Message -----
From: Jim Horton
To: vantage@yahoogroups.com
Sent: Tuesday, November 05, 2002 2:41 PM
Subject: [Vantage] Report Builder


Can anyone tell me how to set it up to allow someone printing a report to chose any printer, instead of the "default printer" used when creating the report.

Thank You Very Much

Jim Horton
Mol-Son, Inc.

Yahoo! Groups Sponsor
ADVERTISEMENT




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


[Non-text portions of this message have been removed]
--- ## Post #179 by @system
Does anyone have a report that shows the Scheduled Shipments and
available inventory.
Thanks
--- ## Post #180 by @system
How can I get Report Builder to include part numbers from "Part"
that have an on hand qty of zero?
--- ## Post #181 by @system
link to the partbin table by company and partnum, and filter the report for
PartBin.OnHandQty = 0

-----Original Message-----
From: Nancy Metcalf <mswabbie@...> [mailto:mswabbie@...]
Sent: Tuesday, January 21, 2003 10:59 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder


How can I get Report Builder to include part numbers from "Part"
that have an on hand qty of zero?



Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/M=241773.2861422.4212389.1925585/D=egroupweb/S=17050071
83:HM/A=1394045/R=0/*http://www.hgtv.com/hgtv/pac_ctnt/text/0,,HGTV_3936_580
2,FF.html> HGTV Dream Home Giveaway

<http://us.adserver.yahoo.com/l?M=241773.2861422.4212389.1925585/D=egroupmai
l/S=:HM/A=1394045/rand=471739390>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #182 by @system
You have to use the left out join between the Part table and PartBin table because the Partbin table does not retain parts with a zero OnHandQty. An equal join will only get you parts that are in both tables. A Left outer join will show you all parts in the Part table, regardless of whether they are in the PartBin table or not.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Mike Lowe
To: vantage@yahoogroups.com ; vantage@yahoogroups.com
Sent: Tuesday, January 21, 2003 11:00 AM
Subject: Re:[Vantage] Report Builder


left outer join to partbin


____________________Reply Separator____________________
Subject: [Vantage] Report Builder
Author: <vantage@yahoogroups.com>
Date: 1/21/03 6:59 PM

How can I get Report Builder to include part numbers from "Part"
that have an on hand qty of zero?


Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/






----------

Received: from alv-web1.alvaka.net [207.213.32.80] by la-smtpg.connorms.com (ccMail Link to SMTP R8.31.00.5)
; Tue, 21 Jan 2003 10:51:42 -0800
Return-Path: <sentto-20369-37250-1043175553-MLowe=connorms.com@...>
Received: from n26.grp.scd.yahoo.com ([66.218.66.82])
by alv-web1.alvaka.net (NAVGW 2.5.1.12) with SMTP id M2003012111003732603
for <MLowe@...>; Tue, 21 Jan 2003 11:00:38 -0800
X-eGroups-Return: sentto-20369-37250-1043175553-MLowe=connorms.com@...
Received: from [66.218.67.200] by n26.grp.scd.yahoo.com with NNFMP; 21 Jan 2003 18:59:14 -0000
X-Sender: mswabbie@...
X-Apparently-To: vantage@yahoogroups.com
Received: (EGP: mail-8_2_3_0); 21 Jan 2003 18:59:13 -0000
Received: (qmail 55698 invoked from network); 21 Jan 2003 18:59:12 -0000
Received: from unknown (66.218.66.216)
by m8.grp.scd.yahoo.com with QMQP; 21 Jan 2003 18:59:12 -0000
Received: from unknown (HELO n21.grp.scd.yahoo.com) (66.218.66.77)
by mta1.grp.scd.yahoo.com with SMTP; 21 Jan 2003 18:59:12 -0000
Received: from [66.218.67.165] by n21.grp.scd.yahoo.com with NNFMP; 21 Jan 2003 18:59:11 -0000
To: vantage@yahoogroups.com
Message-ID: <b0k59v+j8o2@...>
User-Agent: eGroups-EW/0.82
X-Mailer: Yahoo Groups Message Poster
From: "Nancy Metcalf <mswabbie@...>" <mswabbie@...>
X-Originating-IP: 68.98.200.150
X-Yahoo-Profile: mswabbie
MIME-Version: 1.0
Mailing-List: list vantage@yahoogroups.com; contact vantage-owner@yahoogroups.com
Delivered-To: mailing list vantage@yahoogroups.com
Precedence: bulk
List-Unsubscribe: <mailto:vantage-unsubscribe@yahoogroups.com>
Date: Tue, 21 Jan 2003 18:59:11 -0000
Subject: [Vantage] Report Builder
Reply-To: vantage@yahoogroups.com
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit


[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor
ADVERTISEMENT




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


[Non-text portions of this message have been removed]
--- ## Post #183 by @system
ouch... my bad.

-----Original Message-----
From: Troy Funte [mailto:tfunte@...]
Sent: Tuesday, January 21, 2003 2:14 PM
To: vantage@yahoogroups.com
Subject: Re: Re:[Vantage] Report Builder


You have to use the left out join between the Part table and PartBin table
because the Partbin table does not retain parts with a zero OnHandQty. An
equal join will only get you parts that are in both tables. A Left outer
join will show you all parts in the Part table, regardless of whether they
are in the PartBin table or not.

Troy Funte
Liberty Electronics

----- Original Message -----
From: Mike Lowe
To: vantage@yahoogroups.com ; vantage@yahoogroups.com
Sent: Tuesday, January 21, 2003 11:00 AM
Subject: Re:[Vantage] Report Builder


left outer join to partbin


____________________Reply Separator____________________
Subject: [Vantage] Report Builder
Author: <vantage@yahoogroups.com>
Date: 1/21/03 6:59 PM

How can I get Report Builder to include part numbers from "Part"
that have an on hand qty of zero?


Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>






----------

Received: from alv-web1.alvaka.net [207.213.32.80] by
la-smtpg.connorms.com (ccMail Link to SMTP R8.31.00.5)
; Tue, 21 Jan 2003 10:51:42 -0800
Return-Path:
<sentto-20369-37250-1043175553-MLowe=connorms.com@...>
Received: from n26.grp.scd.yahoo.com ([66.218.66.82])
by alv-web1.alvaka.net (NAVGW 2.5.1.12) with SMTP id M2003012111003732603
for <MLowe@...>; Tue, 21 Jan 2003 11:00:38 -0800
X-eGroups-Return:
sentto-20369-37250-1043175553-MLowe=connorms.com@...
Received: from [66.218.67.200] by n26.grp.scd.yahoo.com with NNFMP; 21 Jan
2003 18:59:14 -0000
X-Sender: mswabbie@...
X-Apparently-To: vantage@yahoogroups.com
Received: (EGP: mail-8_2_3_0); 21 Jan 2003 18:59:13 -0000
Received: (qmail 55698 invoked from network); 21 Jan 2003 18:59:12 -0000
Received: from unknown (66.218.66.216)
by m8.grp.scd.yahoo.com with QMQP; 21 Jan 2003 18:59:12 -0000
Received: from unknown (HELO n21.grp.scd.yahoo.com) (66.218.66.77)
by mta1.grp.scd.yahoo.com with SMTP; 21 Jan 2003 18:59:12 -0000
Received: from [66.218.67.165] by n21.grp.scd.yahoo.com with NNFMP; 21 Jan
2003 18:59:11 -0000
To: vantage@yahoogroups.com
Message-ID: <b0k59v+j8o2@...>
User-Agent: eGroups-EW/0.82
X-Mailer: Yahoo Groups Message Poster
From: "Nancy Metcalf <mswabbie@...>" <mswabbie@...>
X-Originating-IP: 68.98.200.150
X-Yahoo-Profile: mswabbie
MIME-Version: 1.0
Mailing-List: list vantage@yahoogroups.com; contact
vantage-owner@yahoogroups.com
Delivered-To: mailing list vantage@yahoogroups.com
Precedence: bulk
List-Unsubscribe: <mailto:vantage-unsubscribe@yahoogroups.com>
Date: Tue, 21 Jan 2003 18:59:11 -0000
Subject: [Vantage] Report Builder
Reply-To: vantage@yahoogroups.com
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit


[Non-text portions of this message have been removed]


Yahoo! Groups Sponsor
ADVERTISEMENT




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/M=241773.2861420.4212388.1925585/D=egroupweb/S=17050071
83:HM/A=1394046/R=0/*http://www.hgtv.com/hgtv/pac_ctnt/text/0,,HGTV_3936_580
2,FF.html> HGTV Dream Home Giveaway

<http://us.adserver.yahoo.com/l?M=241773.2861420.4212388.1925585/D=egroupmai
l/S=:HM/A=1394046/rand=702283577>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #184 by @system
I would like to create a report that just shows the part number and bin
number but I specifically want just the primary bin. How can this be done?
If there is no stock it doesn't show up on the report. I've linked Part with
Partbin and did a left outer join but that still didn't show me the parts
with no stock. What am I doing wrong?

thanks

Fredy Venczel
--- ## Post #185 by @system
I would like to create a report that just shows the part number and bin
number but I specifically want just the primary bin. How can this be done?

PlantWhse contains the primary bin for a part.
Link Part to PlantWhse to partbin for just parts on hand in the primary bin
for a part.
LeftOuter joins on both should get you parts with no inventory or primary
bin assigned aswell.


Patrick Winter


-----Original Message-----
From: Fredy Venczel [mailto:fvenczel@...]
Sent: Monday, April 14, 2003 11:03 AM
To: 'vantage@yahoogroups.com'
Subject: [Vantage] Report Builder


I would like to create a report that just shows the part number and bin
number but I specifically want just the primary bin. How can this be done?
If there is no stock it doesn't show up on the report. I've linked Part with
Partbin and did a left outer join but that still didn't show me the parts
with no stock. What am I doing wrong?

thanks

Fredy Venczel


------------------------ Yahoo! Groups Sponsor ---------------------~--> Get
128 Bit SSL Encryption!
http://us.click.yahoo.com/xaxhjB/hdqFAA/VygGAA/PhFolB/TM
---------------------------------------------------------------------~->

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--- ## Post #186 by @system
Thank you Patrick it worked like a charm.

Fredy Venczel


-----Original Message-----
From: pjw@... [SMTP:pjw@...]
Sent: April 14, 2003 12:24
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder

I would like to create a report that just shows the part number and
bin
number but I specifically want just the primary bin. How can this be
done?

PlantWhse contains the primary bin for a part.
Link Part to PlantWhse to partbin for just parts on hand in the
primary bin
for a part.
LeftOuter joins on both should get you parts with no inventory or
primary
bin assigned aswell.


Patrick Winter


-----Original Message-----
From: Fredy Venczel [mailto:fvenczel@...]
Sent: Monday, April 14, 2003 11:03 AM
To: 'vantage@yahoogroups.com'
Subject: [Vantage] Report Builder


I would like to create a report that just shows the part number and
bin
number but I specifically want just the primary bin. How can this be
done?
If there is no stock it doesn't show up on the report. I've linked
Part with
Partbin and did a left outer join but that still didn't show me the
parts
with no stock. What am I doing wrong?

thanks

Fredy Venczel


------------------------ Yahoo! Groups Sponsor
---------------------~--> Get
128 Bit SSL Encryption!
http://us.click.yahoo.com/xaxhjB/hdqFAA/VygGAA/PhFolB/TM
<http://us.click.yahoo.com/xaxhjB/hdqFAA/VygGAA/PhFolB/TM>

---------------------------------------------------------------------~->

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report
Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/>



Yahoo! Groups Sponsor
ADVERTISEMENT

http://rd.yahoo.com/M=245454.3115308.4434529.1728375/D=egroupweb/S=170500718
3:HM/A=1457554/R=0/*http://ipunda.com/clk/beibunmaisuiyuiwabei
<http://rd.yahoo.com/M=245454.3115308.4434529.1728375/D=egroupweb/S=17050071
83:HM/A=1457554/R=0/*http://ipunda.com/clk/beibunmaisuiyuiwabei>

http://us.adserver.yahoo.com/l?M=245454.3115308.4434529.1728375/D=egroupmail
/S=:HM/A=1457554/rand=526136758
<http://us.adserver.yahoo.com/l?M=245454.3115308.4434529.1728375/D=egroupmai
l/S=:HM/A=1457554/rand=526136758>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must have already linked your email address to a yahoo id to enable access.
)
(1) To access the Files Section of our Yahoo!Group for Report
Builder and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
--- ## Post #187 by @system
I have a report that, among other things, prints out an RMA number for an Sales order if it has one. My question is, if a an SO doesn't have a RMA associated with it, the report prints out a ' 0' . Is there a way to have it print out a blank space instead of a zero and still print out a valid RMA number?

Thanks,

Jasper





[Non-text portions of this message have been removed]
--- ## Post #188 by @system
You could reformat the field as >>>>>> (no 9 on the end). Uncheck the "Show at least one digit" box in the Format.
-Todd C.


-----Original Message-----
From: Jasper Recto [mailto:jrecto@...]
Sent: Tuesday, May 06, 2003 3:34 PM
To: Vantage Groups (E-mail)
Subject: [Vantage] Report Builder


I have a report that, among other things, prints out an RMA number for an Sales order if it has one. My question is, if a an SO doesn't have a RMA associated with it, the report prints out a ' 0' . Is there a way to have it print out a blank space instead of a zero and still print out a valid RMA number?

Thanks,

Jasper





[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor


<http://rd.yahoo.com/M=247865.3003379.4507215.1261774/D=egroupweb/S=1705007183:HM/A=1482387/R=0/*http://ads.x10.com/?bHlhaG9vaG0xLmRhd=1052253269%3eM=247865.3003379.4507215.1261774/D=egroupweb/S=1705007183:HM/A=1482387/R=1=1052253269%3eM=247865.3003379.4507215.1261774/D=egroupweb/S=1705007183:HM/A=1482387/R=2>
<http://us.adserver.yahoo.com/l?M=247865.3003379.4507215.1261774/D=egroupmail/S=:HM/A=1482387/rand=271876226>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #189 by @system
I believe if you right-click on the field and go to 'unknown value' you can
make that empty and it will show blank.



[Non-text portions of this message have been removed]
--- ## Post #190 by @system
Another option is to use a calculated field, but if you do this, you need to
convert the RMA# to a string:

iif(RMA# = 0,"",string(RMA#))



[Non-text portions of this message have been removed]
--- ## Post #191 by @system
Thanks, worked great!
Jasper

-----Original Message-----
From: Todd Caughey [mailto:caugheyt@...]
Sent: Tuesday, May 06, 2003 4:38 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder


You could reformat the field as >>>>>> (no 9 on the end). Uncheck the "Show at least one digit" box in the Format.
-Todd C.


-----Original Message-----
From: Jasper Recto [mailto:jrecto@...]
Sent: Tuesday, May 06, 2003 3:34 PM
To: Vantage Groups (E-mail)
Subject: [Vantage] Report Builder


I have a report that, among other things, prints out an RMA number for an Sales order if it has one. My question is, if a an SO doesn't have a RMA associated with it, the report prints out a ' 0' . Is there a way to have it print out a blank space instead of a zero and still print out a valid RMA number?

Thanks,

Jasper





[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor


< http://rd.yahoo.com/M=247865.3003379.4507215.1261774/D=egroupweb/S=1705007183:HM/A=1482387/R=0/*http://ads.x10.com/?bHlhaG9vaG0xLmRhd=1052253269%3eM=247865.3003379.4507215.1261774/D=egroupweb/S=1705007183:HM/A=1482387/R=1=1052253269%3eM=247865.3003379.4507215.1261774/D=egroupweb/S=1705007183:HM/A=1482387/R=2>
< http://us.adserver.yahoo.com/l?M=247865.3003379.4507215.1261774/D=egroupmail/S=:HM/A=1482387/rand=271876226>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service < http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor


<http://rd.yahoo.com/M=247865.3003379.4507215.1261774/D=egroupweb/S=1705007183:HM/A=1482387/R=0/*http://ads.x10.com/?bHlhaG9vaG0xLmRhd=1052253517%3eM=247865.3003379.4507215.1261774/D=egroupweb/S=1705007183:HM/A=1482387/R=1=1052253517%3eM=247865.3003379.4507215.1261774/D=egroupweb/S=1705007183:HM/A=1482387/R=2>
<http://us.adserver.yahoo.com/l?M=247865.3003379.4507215.1261774/D=egroupmail/S=:HM/A=1482387/rand=235657517>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #192 by @system
I am sure that this may have been discussed before I can't find the
answer. I have a Report Builder report that prints the current on-hand
inventory by warehouse for raw material (Part joined to PartBin, Part
joined to Rcvdtl). I want the last receipt date to print for this
material at the footer for the part. So, it would look like this :

Part Description Current on Hand Last Receipt Date
Warehouse

XYZ RAW MATERIAL 1011 ERR
1313 ERM
Total 2324 04/05/03

How do I get the last Receipt Date to Print ? - sometimes it is correct
- other times it is the first receipt date.
Sorted by, Part, Warehouse, Receipt Date
Grouped by, Part, Warehouse, Receipt Date

Any help would be appreciated.
Kristine Pollard
--- ## Post #193 by @system
Has anyone heard anything regarding Epicor "phasing out" Report Builder?
I have heard Progress will no longer support it after a certain date.






Our Task is to AFFECT Change!!!




WW Sam Perry
<mailto:sperry@...> sperry@...
401.247.7747 x-580




[Non-text portions of this message have been removed]
--- ## Post #194 by @system
Progress says they will support it indefinately (that is no definite drop dead date) but will no longer be enhancing it feature wise. Their prefered report writer will become Crystal. I don't think it has anything to do with Epicor phasing it out as much as Progress gradually moving away from it.
-Todd C.

-----Original Message-----
From: Perry, Sam [mailto:sperry@...]
Sent: Thursday, May 29, 2003 10:28 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder


Has anyone heard anything regarding Epicor "phasing out" Report Builder?
I have heard Progress will no longer support it after a certain date.






Our Task is to AFFECT Change!!!




WW Sam Perry
<mailto:sperry@...> sperry@...
401.247.7747 x-580




[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor


<http://rd.yahoo.com/M=247865.3355058.4641699.1512248/D=egroupweb/S=1705007183:HM/A=1482387/R=0/*http://ads.x10.com/?bHlhaG9vaG0xLmRhd=1054222081%3eM=247865.3355058.4641699.1512248/D=egroupweb/S=1705007183:HM/A=1482387/R=1=1054222081%3eM=247865.3355058.4641699.1512248/D=egroupweb/S=1705007183:HM/A=1482387/R=2>
<http://us.adserver.yahoo.com/l?M=247865.3355058.4641699.1512248/D=egroupmail/S=:HM/A=1482387/rand=181337317>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #195 by @system
Yes, the word is that Progress wants to phase out Report Builder. We will be
directed to other means such as Crystal, Export Utility, Digital Dash Board
and VBI.

Patrick Winter


-----Original Message-----
From: Perry, Sam [mailto:sperry@...]
Sent: Thursday, May 29, 2003 10:28 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder


Has anyone heard anything regarding Epicor "phasing out" Report Builder?
I have heard Progress will no longer support it after a certain date.






Our Task is to AFFECT Change!!!




WW Sam Perry
<mailto:sperry@...> sperry@...
401.247.7747 x-580




[Non-text portions of this message have been removed]


------------------------ Yahoo! Groups Sponsor ---------------------~--> Get
A Free Psychic Reading! Your Online Answer To Life's Important Questions.
http://us.click.yahoo.com/Lj3uPC/Me7FAA/CNxFAA/PhFolB/TM
---------------------------------------------------------------------~->

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--- ## Post #196 by @system
At a Progress "Peak your Skills" Marv Stone said Progress and CA
worked out a deal and Crystal Light will ship with Progress 10. I
think they also said the exe would run.
The question that occurs to me now is we will be able to run old RB
reports. Can we write and modify reports?

Russ Dover


> Yes, the word is that Progress wants to phase out Report Builder. We
> will be
> directed to other means such as Crystal, Export Utility, Digital Dash
> Board
> and VBI.
>
> Patrick Winter
>
>
> -----Original Message-----
> From: Perry, Sam [mailto:sperry@...]
> Sent: Thursday, May 29, 2003 10:28 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Report Builder
>
>
> Has anyone heard anything regarding Epicor "phasing out" Report
> Builder?
> I have heard Progress will no longer support it after a certain date.
>
>
>
>
>
>
> Our Task is to AFFECT Change!!!
>
>
>
>
> WW Sam Perry
> <mailto:sperry@...> sperry@...
> 401.247.7747 x-580
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
> ------------------------ Yahoo! Groups Sponsor ---------------------~-
> -> Get
> A Free Psychic Reading! Your Online Answer To Life's Important
> Questions.
> http://us.click.yahoo.com/Lj3uPC/Me7FAA/CNxFAA/PhFolB/TM
> ---------------------------------------------------------------------
> ~->
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
> must have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder
> and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>

Russ Dover
IS Manager
Weaver Industries, Inc.
717 336 7507 phone
717 336 4182 fax
rdover@...
www.weaverind.com
--- ## Post #197 by @system
I know this issue has been posted here before, but I am looking for a
program that allows you to schedule and automatically run report
builder reports.

Thanks,

Mark Smith
--- ## Post #198 by @system
Need some assistance with a report. I have designed a report to
display quote information such as quotenun, datequote, etc. Mainly
fields from one of the quote tables. However, one desired parameter
is customer contact name (which comes from the custcnt table). My
master table is quotehed, which isn't directly related to custcnt and
when I run the report pulls every contact for a customer. I have
tried some left outer joins causing the report to run for 5 or more
minutes. If there are any report builer guru's out there your help
would be appreciated.

Thanks,

Mark Smith
--- ## Post #199 by @system
Join quotehed table to the Quotecnt table - the name is included in the
quotecnt table. Since you can have more than one contact per quote, you'll
need to filter on the quotecnt PrimeContact field to get only those flagged
as the primary contact if that is what you want. You'll need to left-outer
join if you also want to include quotes that do not have a contact listed.



[Non-text portions of this message have been removed]
--- ## Post #200 by @system
Sarah:



Thanks I'll give this a shot.



-----Original Message-----
From: sarah.vareschi@... [mailto:sarah.vareschi@...]

Sent: Thursday, July 31, 2003 10:04 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] RE: Report Builder



Join quotehed table to the Quotecnt table - the name is included in the
quotecnt table. Since you can have more than one contact per quote,
you'll
need to filter on the quotecnt PrimeContact field to get only those
flagged
as the primary contact if that is what you want. You'll need to
left-outer
join if you also want to include quotes that do not have a contact
listed.



[Non-text portions of this message have been removed]






Yahoo! Groups Sponsor



ADVERTISEMENT

<http://rd.yahoo.com/M=256694.3651271.4917408.1261774/D=egroupweb/S=1705
007183:HM/A=1688501/R=0/SIG=11if1rb57/*http:/webevents.yahoo.com/univers
al/seabiscuit/>



<http://us.adserver.yahoo.com/l?M=256694.3651271.4917408.1261774/D=egrou
pmail/S=:HM/A=1688501/rand=965749683>


Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.



[Non-text portions of this message have been removed]
--- ## Post #201 by @system
Help needed with a report builder report. I am trying to create a
report that gives Part Number, On Order Qty,On Hand Qty, Demand Qty,
and Available Qty. There is a similar report already posted called
Part QOH and Allocated, but doesn't provide a order quantity and I
don't see a way join PartWhse or PartBin to a PO. I have tried
several other iterations without success. Are there any report
builder gurus out their that may a report similar to this? Your help
would be greatly appreciated.

Thanks,

Mark Smith
--- ## Post #202 by @system
I would be really interested in this as well. I took a look at it recently
and decided it was over by skill level. I would really like to have a
report like this that I could tinker with.

Mitchell Kirby
V. P. Manufacturing
Riten Industries, Inc.

740-333-8719 Direct
800-338-0027 Sales
800-338-0717 FAX


-----Original Message-----
From: innerpac_il [mailto:mark_smith@...]
Sent: Tuesday, September 09, 2003 3:28 PM
To: vantage@yahoogroups.com
Subject: [Vantage] RE: Report Builder


Help needed with a report builder report. I am trying to create a
report that gives Part Number, On Order Qty,On Hand Qty, Demand Qty,
and Available Qty. There is a similar report already posted called
Part QOH and Allocated, but doesn't provide a order quantity and I
don't see a way join PartWhse or PartBin to a PO. I have tried
several other iterations without success. Are there any report
builder gurus out their that may a report similar to this? Your help
would be greatly appreciated.

Thanks,

Mark Smith



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--- ## Post #203 by @system
Good Morning:

I am trying to write a report that will display all my reports with
in a PRL library, when it was last run and if possible it's
location. Does anyone out there have something like this or similar
to this? Your help would be appreciated.

Thanks,

Mark Smith
--- ## Post #204 by @system
This woudl be very beneficial to me as well
let me know how it goes

James Piper
admin@...


--- In vantage@yahoogroups.com, "innerpac_il" <mark_smith@i...> wrote:
> Good Morning:
>
> I am trying to write a report that will display all my reports with
> in a PRL library, when it was last run and if possible it's
> location. Does anyone out there have something like this or similar
> to this? Your help would be appreciated.
>
> Thanks,
>
> Mark Smith
--- ## Post #205 by @system
There is a reptlist.p procedure in your Progress\src\aderb\examples folder. This is supposed to give you a list of reports in a .prl. I've never tried it so I don't know if it works.

Good luck!
Jasper

-----Original Message-----
From: innerpac_il [mailto:mark_smith@...]
Sent: Tuesday, November 25, 2003 9:20 AM
To: vantage@yahoogroups.com
Subject: [Vantage] RE: Report Builder


Good Morning:

I am trying to write a report that will display all my reports with
in a PRL library, when it was last run and if possible it's
location. Does anyone out there have something like this or similar
to this? Your help would be appreciated.

Thanks,

Mark Smith



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--- ## Post #206 by @system
Don't have a report, but I wrote an app that allows you to select a PRL, it
then displays all reports in the library. You can then select 1 to all (or
any in between) and batch print the selected reports. You can also print
the report library listing. I don't think you can find the last run time
for a report, but if its possible, I would like to see it done.

-----Original Message-----
From: innerpac_il [mailto:mark_smith@...]
Sent: Tuesday, November 25, 2003 8:20 AM
To: vantage@yahoogroups.com
Subject: [Vantage] RE: Report Builder


Good Morning:

I am trying to write a report that will display all my reports with
in a PRL library, when it was last run and if possible it's
location. Does anyone out there have something like this or similar
to this? Your help would be appreciated.

Thanks,

Mark Smith
--- ## Post #207 by @system
Jasper, that's pretty interesting. Maybe more could be made from it by someone who knows Progress programming. I copied a small PRL to that folder (and renamed it rbsample.prl) and ran it and sure enough it did list the reports in the PRL file. No other info though. I did some exploring about Concentric Data Systems (who originally wrote R&R Report Writer which Report Builder is based on) and R&R is now distributed by Liveware Publishing. They have a Report Librarian but I see they are also on version 10 and the version Report Builder reports is 2.03 or something like that. So they probably diverged a long time ago.

One big weakness in RB has always been a way to find reports. Giving them serially numbered names and cataloging them in Excel (or a database) is too much extra work.

-Todd C.

-----Original Message-----
From: Jasper Recto [mailto:jrecto@...]
Sent: Tuesday, November 25, 2003 9:23 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] RE: Report Builder


There is a reptlist.p procedure in your Progress\src\aderb\examples folder. This is supposed to give you a list of reports in a .prl. I've never tried it so I don't know if it works.

Good luck!
Jasper

-----Original Message-----
From: innerpac_il [mailto:mark_smith@...]
Sent: Tuesday, November 25, 2003 9:20 AM
To: vantage@yahoogroups.com
Subject: [Vantage] RE: Report Builder


Good Morning:

I am trying to write a report that will display all my reports with
in a PRL library, when it was last run and if possible it's
location. Does anyone out there have something like this or similar
to this? Your help would be appreciated.

Thanks,

Mark Smith



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




Yahoo! Groups Sponsor

ADVERTISEMENT
<http://rd.yahoo.com/SIG=12c05h29p/M=267637.4116730.5333196.1261774/D=egroupweb/S=1705007183:HM/EXP=1069860331/A=1853618/R=0/*http://www.netflix.com/Default?mqso=60178338&partid=4116730> click here
<http://us.adserver.yahoo.com/l?M=267637.4116730.5333196.1261774/D=egroupmail/S=:HM/A=1853618/rand=887121904>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #208 by @system
I just downloaded a report for listing custom reports. I don't remember if
I wrote it or got it from the list. Anyway it works well for me.


Mark Dupuis


-----Original Message-----
From: Jasper Recto [mailto:jrecto@...]
Sent: Tuesday, November 25, 2003 10:23 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] RE: Report Builder


There is a reptlist.p procedure in your Progress\src\aderb\examples folder.
This is supposed to give you a list of reports in a .prl. I've never tried
it so I don't know if it works.

Good luck!
Jasper

-----Original Message-----
From: innerpac_il [mailto:mark_smith@...]
Sent: Tuesday, November 25, 2003 9:20 AM
To: vantage@yahoogroups.com
Subject: [Vantage] RE: Report Builder


Good Morning:

I am trying to write a report that will display all my reports with
in a PRL library, when it was last run and if possible it's
location. Does anyone out there have something like this or similar
to this? Your help would be appreciated.

Thanks,

Mark Smith



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>




Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/SIG=12c05h29p/M=267637.4116730.5333196.1261774/D=egroup
web/S=1705007183:HM/EXP=1069860331/A=1853618/R=0/*http://www.netflix.com/Def
ault?mqso=60178338&partid=4116730> click here

<http://us.adserver.yahoo.com/l?M=267637.4116730.5333196.1261774/D=egroupmai
l/S=:HM/A=1853618/rand=887121904>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #209 by @system
Crystal Reports also can use the file system as a report source. It is
listed under "other data sources" and will allow filtering on the .prl file
extension.

Michael Barry

Michael Barry
Aspacia Systems Inc
866.566.9600
312.803.0730 fax
http://www.aspacia.com/

This email, and any attachments thereto, is intended only for use by the
addressee(s) named herein and may contain legally privileged and/or
confidential information. If you are not the intended recipient of this
email, you are hereby notified that any dissemination, distribution or
copying of this email, and any attachments thereto, is strictly prohibited.
If you have received this email in error, please immediately notify me by
telephone and permanently delete the original and any copy of any email and
any printout thereof.

-----Original Message-----
From: Mark Dupuis [mailto:dupuism@...]
Sent: Tuesday, November 25, 2003 8:01 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] RE: Report Builder

I just downloaded a report for listing custom reports. I don't remember if
I wrote it or got it from the list. Anyway it works well for me.


Mark Dupuis


-----Original Message-----
From: Jasper Recto [mailto:jrecto@...]
Sent: Tuesday, November 25, 2003 10:23 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] RE: Report Builder


There is a reptlist.p procedure in your Progress\src\aderb\examples folder.
This is supposed to give you a list of reports in a .prl. I've never tried
it so I don't know if it works.

Good luck!
Jasper

-----Original Message-----
From: innerpac_il [mailto:mark_smith@...]
Sent: Tuesday, November 25, 2003 9:20 AM
To: vantage@yahoogroups.com
Subject: [Vantage] RE: Report Builder


Good Morning:

I am trying to write a report that will display all my reports with in a PRL
library, when it was last run and if possible it's location. Does anyone
out there have something like this or similar to this? Your help would be
appreciated.

Thanks,

Mark Smith



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<http://docs.yahoo.com/info/terms/>




Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/SIG=12c05h29p/M=267637.4116730.5333196.1261774/D=egroup
web/S=1705007183:HM/EXP=1069860331/A=1853618/R=0/*http://www.netflix.com/Def
ault?mqso=60178338&partid=4116730> click here

<http://us.adserver.yahoo.com/l?M=267637.4116730.5333196.1261774/D=egroupmai
l/S=:HM/A=1853618/rand=887121904>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]


------------------------ Yahoo! Groups Sponsor ---------------------~--> Buy
Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark Printer
at MyInks.com. Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/PhFolB/TM
---------------------------------------------------------------------~->

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--- ## Post #210 by @system
All right, now don't laugh (too hard); but does anyone have any experiences
(bad or good) connecting a Windows 3.11 machine (yes, that's right, 3.11,
I'm ashamed) to a Windows 2003 Server?

I've been "hearing" it can't be done, as well as connecting Windows 95
machines; however, I got my windows 95 machine to connect by disabling a
security protocol called SMB (which 3.11, NT 3.51 and 95 have no support
for). Windows 3.11, I figured, should work now like 95 does, but for some
reason my 3.11 test client I have just won't connect (grrrr! No Connecting
and Monopoly Microsoft make Jessee go something something something).

Hmmmm, Google Groups isn't being of help anymore either, so I'm seeing if
anyone else in this group has had a simular "experience".

Thanks for any info provided,
Jessee Holmes
--- ## Post #211 by @system
Jessie, write me, I have a 486 machine, windows 98, I'll ship it to you
for shipping and $80.00 bucks. It'll be cheaper. You can use paypal.

Shirley

-----Original Message-----
From: Jessee Holmes [mailto:jholmes@...]
Sent: Tuesday, November 25, 2003 11:42 AM
To: vantage@yahoogroups.com
Subject: [Vantage] OT: Another Windows 2003 Question

All right, now don't laugh (too hard); but does anyone have any
experiences
(bad or good) connecting a Windows 3.11 machine (yes, that's right,
3.11,
I'm ashamed) to a Windows 2003 Server?

I've been "hearing" it can't be done, as well as connecting Windows 95
machines; however, I got my windows 95 machine to connect by disabling a
security protocol called SMB (which 3.11, NT 3.51 and 95 have no support
for). Windows 3.11, I figured, should work now like 95 does, but for
some
reason my 3.11 test client I have just won't connect (grrrr! No
Connecting
and Monopoly Microsoft make Jessee go something something something).

Hmmmm, Google Groups isn't being of help anymore either, so I'm seeing
if
anyone else in this group has had a simular "experience".

Thanks for any info provided,
Jessee Holmes





Yahoo! Groups Sponsor


ADVERTISEMENT

<http://rd.yahoo.com/SIG=12cof4o8s/M=267637.4116730.5333196.1261774/D=eg
roupweb/S=1705007183:HM/EXP=1069864946/A=1853619/R=0/*http:/www.netflix.
com/Default?mqso=60178356&partid=4116730> click here


<http://us.adserver.yahoo.com/l?M=267637.4116730.5333196.1261774/D=egrou
pmail/S=:HM/A=1853619/rand=647152455>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo!
<http://docs.yahoo.com/info/terms/> Terms of Service.

Tracking #: 7FF8CBB8A2692E42A5B75DA56B51759FB3EA95BA


[Non-text portions of this message have been removed]
--- ## Post #212 by @system
Do you work for the Smithsonian Institute?

Hee! Hee! I couldn't resist. Actually, when I left my previous place
of employment I had an application that we had to run on a 386. A 486
was too fast. This was a state mandatory program. Don't feel so alone.

-----Original Message-----
From: Jessee Holmes [mailto:jholmes@...]
Sent: Tuesday, November 25, 2003 10:42 AM
To: vantage@yahoogroups.com
Subject: [Vantage] OT: Another Windows 2003 Question


All right, now don't laugh (too hard); but does anyone have any
experiences
(bad or good) connecting a Windows 3.11 machine (yes, that's right,
3.11,
I'm ashamed) to a Windows 2003 Server?

I've been "hearing" it can't be done, as well as connecting Windows 95
machines; however, I got my windows 95 machine to connect by disabling a
security protocol called SMB (which 3.11, NT 3.51 and 95 have no support
for). Windows 3.11, I figured, should work now like 95 does, but for
some
reason my 3.11 test client I have just won't connect (grrrr! No
Connecting
and Monopoly Microsoft make Jessee go something something something).

Hmmmm, Google Groups isn't being of help anymore either, so I'm seeing
if
anyone else in this group has had a simular "experience".

Thanks for any info provided,
Jessee Holmes
--- ## Post #213 by @system
I have several old 286's hooked up to Turret and older Laser machines
One of the newest Laser we have acutally is running NT 4.0 Workstation!
Its nice as I can connect to it via the network
We have to transfer files to the old laser in DOS via a serial port

It is being done
Upgrading to better systems means speading hundreds of thousands of
dollars on new machines
--- ## Post #214 by @system
B I G disclaimer: This information is from neurons that haven't fired in a
L O N G time.

Seems to me that Win 3.11 loaded the network drivers at the DOS level when
booting, before windows started.
If that is so I am running a DOS 6.? computer using the Microsoft TCP/IP
drivers/client. They are working. This computer
runs a program from Point Control for downloading CNC programs to our
machines. It connects to a W2K server.
I'm running AD in mixed mode.
I believe I got the client off of a WinNT4.0 Server CD. Not sure.

Here's Autoexec.bat and Config.sys (haven't messed with those in a while!)

C:\NET\net initialize
@echo off
C:\NET\nwlink
prompt $p$g
set dircmd=/o/p
path C:\NET;c:\;c:\dos
C:\NET\netbind.com
C:\NET\umb.com
C:\NET\tcptsr.exe
C:\NET\tinyrfc.exe
C:\NET\nmtsr.exe
C:\NET\emsbfr.exe
C:\NET\net start
MENU

DEVICE=C:\QEMM\QEMM386.SYS aram=de00-dfff R:1 ram sh:n
device=c:\qemm\dos-up.sys @c:\qemm\dos-up.dat
DEVICE=C:\QEMM\LOADHI.SYS /R:1 /SIZE=9328 C:\DOS\ANSI.SYS
FILES=60
BUFFERS=25
SHELL=C:\QEMM\LOADHI.COM /R:2 C:\DOS\COMMAND.COM C:\DOS\ /e:1024/p
STACKS=9,256
LASTDRIVE=Z

device=C:\NET\ifshlp.sys


-----Original Message-----
From: Jessee Holmes [mailto:jholmes@...]
Sent: Tuesday, November 25, 2003 10:42 AM
To: vantage@yahoogroups.com
Subject: [Vantage] OT: Another Windows 2003 Question


All right, now don't laugh (too hard); but does anyone have any experiences
(bad or good) connecting a Windows 3.11 machine (yes, that's right, 3.11,
I'm ashamed) to a Windows 2003 Server?

I've been "hearing" it can't be done, as well as connecting Windows 95
machines; however, I got my windows 95 machine to connect by disabling a
security protocol called SMB (which 3.11, NT 3.51 and 95 have no support
for). Windows 3.11, I figured, should work now like 95 does, but for some
reason my 3.11 test client I have just won't connect (grrrr! No Connecting
and Monopoly Microsoft make Jessee go something something something).

Hmmmm, Google Groups isn't being of help anymore either, so I'm seeing if
anyone else in this group has had a simular "experience".

Thanks for any info provided,
Jessee Holmes



Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/SIG=12cof4o8s/M=267637.4116730.5333196.1261774/D=egroup
web/S=1705007183:HM/EXP=1069864946/A=1853619/R=0/*http://www.netflix.com/Def
ault?mqso=60178356&partid=4116730> click here

<http://us.adserver.yahoo.com/l?M=267637.4116730.5333196.1261774/D=egroupmai
l/S=:HM/A=1853619/rand=647152455>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #215 by @system
I checked. On my NT 4.0 Server CD.
NTSRV40A (D:0
>CLIENTS
>MSCLIENT
>NETSETUP ( If you have a cd drive)
>DISKS
>DISK1
>DISK2 (to create install floppies )

Good Luck! and condolences.




[Non-text portions of this message have been removed]
--- ## Post #216 by @system
Great thanks Robert, I'll look this over.

As far as Windows 3.11 goes, I guess I should have explained a little
more... YES, I would love to upgrade to even Windows 95 (ha-ha, sad; no but
seriously anything but 3.11). Although, I cannot unfortunately due to a
program that will only run in Windows 3.11. I once tried upgrading the
machine to Windows 2000 thinking that I could run some dos emulator or 3.11
emulator but for some reason it didn't work cause the software needs to
communicate with a press brake machine.

So I tried tracking down and calling the developers of this software (which
was extremely difficult) and go figure, they went bankrupt and the developer
didn't want to talk to me (I guess he's too good for that now). So, pretty
much I have a VERY expensive piece of ..... something .... on my hands that
I have to continue to support. UGH I love my job!


So that's my story. That's why I haven't gone and spent a hundred bucks to
upgrade the *&$%$ machine ... and that's why im seeing if anyone else out
there has all ready gone through this Microsoft mess.

Jessee Holmes

-----Original Message-----
From: Robert Bruton [mailto:bob@...]
Sent: Tuesday, November 25, 2003 11:06 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Another Windows 2003 Question


B I G disclaimer: This information is from neurons that haven't fired in a
L O N G time.

Seems to me that Win 3.11 loaded the network drivers at the DOS level when
booting, before windows started.
If that is so I am running a DOS 6.? computer using the Microsoft TCP/IP
drivers/client. They are working. This computer
runs a program from Point Control for downloading CNC programs to our
machines. It connects to a W2K server.
I'm running AD in mixed mode.
I believe I got the client off of a WinNT4.0 Server CD. Not sure.

Here's Autoexec.bat and Config.sys (haven't messed with those in a while!)

C:\NET\net initialize
@echo off
C:\NET\nwlink
prompt $p$g
set dircmd=/o/p
path C:\NET;c:\;c:\dos
C:\NET\netbind.com
C:\NET\umb.com
C:\NET\tcptsr.exe
C:\NET\tinyrfc.exe
C:\NET\nmtsr.exe
C:\NET\emsbfr.exe
C:\NET\net start
MENU

DEVICE=C:\QEMM\QEMM386.SYS aram=de00-dfff R:1 ram sh:n
device=c:\qemm\dos-up.sys @c:\qemm\dos-up.dat
DEVICE=C:\QEMM\LOADHI.SYS /R:1 /SIZE=9328 C:\DOS\ANSI.SYS
FILES=60
BUFFERS=25
SHELL=C:\QEMM\LOADHI.COM /R:2 C:\DOS\COMMAND.COM C:\DOS\ /e:1024/p
STACKS=9,256
LASTDRIVE=Z

device=C:\NET\ifshlp.sys


-----Original Message-----
From: Jessee Holmes [mailto:jholmes@...]
Sent: Tuesday, November 25, 2003 10:42 AM
To: vantage@yahoogroups.com
Subject: [Vantage] OT: Another Windows 2003 Question


All right, now don't laugh (too hard); but does anyone have any experiences
(bad or good) connecting a Windows 3.11 machine (yes, that's right, 3.11,
I'm ashamed) to a Windows 2003 Server?

I've been "hearing" it can't be done, as well as connecting Windows 95
machines; however, I got my windows 95 machine to connect by disabling a
security protocol called SMB (which 3.11, NT 3.51 and 95 have no support
for). Windows 3.11, I figured, should work now like 95 does, but for some
reason my 3.11 test client I have just won't connect (grrrr! No Connecting
and Monopoly Microsoft make Jessee go something something something).

Hmmmm, Google Groups isn't being of help anymore either, so I'm seeing if
anyone else in this group has had a simular "experience".

Thanks for any info provided,
Jessee Holmes



Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/SIG=12cof4o8s/M=267637.4116730.5333196.1261774/D=egroup
web/S=1705007183:HM/EXP=1069864946/A=1853619/R=0/*http://www.netflix.com/Def
ault?mqso=60178356&partid=4116730> click here

<http://us.adserver.yahoo.com/l?M=267637.4116730.5333196.1261774/D=egroupmai
l/S=:HM/A=1853619/rand=647152455>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/SIG=12c7i5pfk/M=267637.4116732.5333197.1261774/D=egroup
web/S=1705007183:HM/EXP=1069866415/A=1853618/R=0/*http://www.netflix.com/Def
ault?mqso=60178338&partid=4116732> click here

<http://us.adserver.yahoo.com/l?M=267637.4116732.5333197.1261774/D=egroupmai
l/S=:HM/A=1853618/rand=660196762>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #217 by @system
Jessee,

Here's an idea...you can upgrade the machine to a bronze age OS and run your
program in a Virtual PC running Windows 3.11. You can get a copy of Virtual
PC for a little over $100 these days and it will run your app and
communicate with the press brake just like it is running on the host system.

mjb

-----Original Message-----
From: Jessee Holmes [mailto:jholmes@...]
Sent: Tuesday, November 25, 2003 9:26 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Another Windows 2003 Question

Great thanks Robert, I'll look this over.

As far as Windows 3.11 goes, I guess I should have explained a little
more... YES, I would love to upgrade to even Windows 95 (ha-ha, sad; no but
seriously anything but 3.11). Although, I cannot unfortunately due to a
program that will only run in Windows 3.11. I once tried upgrading the
machine to Windows 2000 thinking that I could run some dos emulator or 3.11
emulator but for some reason it didn't work cause the software needs to
communicate with a press brake machine.

So I tried tracking down and calling the developers of this software (which
was extremely difficult) and go figure, they went bankrupt and the developer
didn't want to talk to me (I guess he's too good for that now). So, pretty
much I have a VERY expensive piece of ..... something .... on my hands that
I have to continue to support. UGH I love my job!


So that's my story. That's why I haven't gone and spent a hundred bucks to
upgrade the *&$%$ machine ... and that's why im seeing if anyone else out
there has all ready gone through this Microsoft mess.

Jessee Holmes

-----Original Message-----
From: Robert Bruton [mailto:bob@...]
Sent: Tuesday, November 25, 2003 11:06 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Another Windows 2003 Question


B I G disclaimer: This information is from neurons that haven't fired in a
L O N G time.

Seems to me that Win 3.11 loaded the network drivers at the DOS level when
booting, before windows started.
If that is so I am running a DOS 6.? computer using the Microsoft TCP/IP
drivers/client. They are working. This computer
runs a program from Point Control for downloading CNC programs to our
machines. It connects to a W2K server.
I'm running AD in mixed mode.
I believe I got the client off of a WinNT4.0 Server CD. Not sure.

Here's Autoexec.bat and Config.sys (haven't messed with those in a while!)

C:\NET\net initialize
@echo off
C:\NET\nwlink
prompt $p$g
set dircmd=/o/p
path C:\NET;c:\;c:\dos
C:\NET\netbind.com
C:\NET\umb.com
C:\NET\tcptsr.exe
C:\NET\tinyrfc.exe
C:\NET\nmtsr.exe
C:\NET\emsbfr.exe
C:\NET\net start
MENU

DEVICE=C:\QEMM\QEMM386.SYS aram=de00-dfff R:1 ram sh:n
device=c:\qemm\dos-up.sys @c:\qemm\dos-up.dat
DEVICE=C:\QEMM\LOADHI.SYS /R:1 /SIZE=9328 C:\DOS\ANSI.SYS
FILES=60
BUFFERS=25
SHELL=C:\QEMM\LOADHI.COM /R:2 C:\DOS\COMMAND.COM C:\DOS\ /e:1024/p
STACKS=9,256
LASTDRIVE=Z

device=C:\NET\ifshlp.sys


-----Original Message-----
From: Jessee Holmes [mailto:jholmes@...]
Sent: Tuesday, November 25, 2003 10:42 AM
To: vantage@yahoogroups.com
Subject: [Vantage] OT: Another Windows 2003 Question


All right, now don't laugh (too hard); but does anyone have any experiences
(bad or good) connecting a Windows 3.11 machine (yes, that's right, 3.11,
I'm ashamed) to a Windows 2003 Server?

I've been "hearing" it can't be done, as well as connecting Windows 95
machines; however, I got my windows 95 machine to connect by disabling a
security protocol called SMB (which 3.11, NT 3.51 and 95 have no support
for). Windows 3.11, I figured, should work now like 95 does, but for some
reason my 3.11 test client I have just won't connect (grrrr! No Connecting
and Monopoly Microsoft make Jessee go something something something).

Hmmmm, Google Groups isn't being of help anymore either, so I'm seeing if
anyone else in this group has had a simular "experience".

Thanks for any info provided,
Jessee Holmes



Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/SIG=12cof4o8s/M=267637.4116730.5333196.1261774/D=egroup
web/S=1705007183:HM/EXP=1069864946/A=1853619/R=0/*http://www.netflix.com/Def
ault?mqso=60178356&partid=4116730> click here

<http://us.adserver.yahoo.com/l?M=267637.4116730.5333196.1261774/D=egroupmai
l/S=:HM/A=1853619/rand=647152455>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/SIG=12c7i5pfk/M=267637.4116732.5333197.1261774/D=egroup
web/S=1705007183:HM/EXP=1069866415/A=1853618/R=0/*http://www.netflix.com/Def
ault?mqso=60178338&partid=4116732> click here

<http://us.adserver.yahoo.com/l?M=267637.4116732.5333197.1261774/D=egroupmai
l/S=:HM/A=1853618/rand=660196762>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--- ## Post #218 by @system
Yeah, I tried that too ... And I really don't understand why???? But it
still doesn't work. The software can't communicate with the machine when
running another OS EVEN when running 3.11 through virtual PC.

I have a big beef with programmers that won't follow standards, I have a ton
of other things like that that were built with 3.11 in mind but works with
anything else!

Thanks for the idea though, appreciate it.

The only option now that I can think of is somehow sabotaging the machine
(dynamite comes to mind) so then they HAVE to buy another. Hmmmmmm ...
(evil thoughts) Mwaaa ha ha ha!

Evil Jessee Holmes

-----Original Message-----
From: Michael Barry [mailto:mbarry@...]
Sent: Tuesday, November 25, 2003 11:42 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Another Windows 2003 Question


Jessee,

Here's an idea...you can upgrade the machine to a bronze age OS and run your
program in a Virtual PC running Windows 3.11. You can get a copy of Virtual
PC for a little over $100 these days and it will run your app and
communicate with the press brake just like it is running on the host system.

mjb

-----Original Message-----
From: Jessee Holmes [mailto:jholmes@...]
Sent: Tuesday, November 25, 2003 9:26 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Another Windows 2003 Question

Great thanks Robert, I'll look this over.

As far as Windows 3.11 goes, I guess I should have explained a little
more... YES, I would love to upgrade to even Windows 95 (ha-ha, sad; no but
seriously anything but 3.11). Although, I cannot unfortunately due to a
program that will only run in Windows 3.11. I once tried upgrading the
machine to Windows 2000 thinking that I could run some dos emulator or 3.11
emulator but for some reason it didn't work cause the software needs to
communicate with a press brake machine.

So I tried tracking down and calling the developers of this software (which
was extremely difficult) and go figure, they went bankrupt and the developer
didn't want to talk to me (I guess he's too good for that now). So, pretty
much I have a VERY expensive piece of ..... something .... on my hands that
I have to continue to support. UGH I love my job!


So that's my story. That's why I haven't gone and spent a hundred bucks to
upgrade the *&$%$ machine ... and that's why im seeing if anyone else out
there has all ready gone through this Microsoft mess.

Jessee Holmes

-----Original Message-----
From: Robert Bruton [mailto:bob@...]
Sent: Tuesday, November 25, 2003 11:06 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Another Windows 2003 Question


B I G disclaimer: This information is from neurons that haven't fired in a
L O N G time.

Seems to me that Win 3.11 loaded the network drivers at the DOS level when
booting, before windows started. If that is so I am running a DOS 6.?
computer using the Microsoft TCP/IP drivers/client. They are working. This
computer
runs a program from Point Control for downloading CNC programs to our
machines. It connects to a W2K server.
I'm running AD in mixed mode.
I believe I got the client off of a WinNT4.0 Server CD. Not sure.

Here's Autoexec.bat and Config.sys (haven't messed with those in a while!)

C:\NET\net initialize
@echo off
C:\NET\nwlink
prompt $p$g
set dircmd=/o/p
path C:\NET;c:\;c:\dos
C:\NET\netbind.com
C:\NET\umb.com
C:\NET\tcptsr.exe
C:\NET\tinyrfc.exe
C:\NET\nmtsr.exe
C:\NET\emsbfr.exe
C:\NET\net start
MENU

DEVICE=C:\QEMM\QEMM386.SYS aram=de00-dfff R:1 ram sh:n
device=c:\qemm\dos-up.sys @c:\qemm\dos-up.dat DEVICE=C:\QEMM\LOADHI.SYS /R:1
/SIZE=9328 C:\DOS\ANSI.SYS FILES=60 BUFFERS=25 SHELL=C:\QEMM\LOADHI.COM /R:2
C:\DOS\COMMAND.COM C:\DOS\ /e:1024/p STACKS=9,256 LASTDRIVE=Z

device=C:\NET\ifshlp.sys


-----Original Message-----
From: Jessee Holmes [mailto:jholmes@...]
Sent: Tuesday, November 25, 2003 10:42 AM
To: vantage@yahoogroups.com
Subject: [Vantage] OT: Another Windows 2003 Question


All right, now don't laugh (too hard); but does anyone have any experiences
(bad or good) connecting a Windows 3.11 machine (yes, that's right, 3.11,
I'm ashamed) to a Windows 2003 Server?

I've been "hearing" it can't be done, as well as connecting Windows 95
machines; however, I got my windows 95 machine to connect by disabling a
security protocol called SMB (which 3.11, NT 3.51 and 95 have no support
for). Windows 3.11, I figured, should work now like 95 does, but for some
reason my 3.11 test client I have just won't connect (grrrr! No Connecting
and Monopoly Microsoft make Jessee go something something something).

Hmmmm, Google Groups isn't being of help anymore either, so I'm seeing if
anyone else in this group has had a simular "experience".

Thanks for any info provided,
Jessee Holmes



Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/SIG=12cof4o8s/M=267637.4116730.5333196.1261774/D=egroup
web/S=1705007183:HM/EXP=1069864946/A=1853619/R=0/*http://www.netflix.com/Def
ault?mqso=60178356&partid=4116730> click here

<http://us.adserver.yahoo.com/l?M=267637.4116730.5333196.1261774/D=egroupmai
l/S=:HM/A=1853619/rand=647152455>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/SIG=12c7i5pfk/M=267637.4116732.5333197.1261774/D=egroup
web/S=1705007183:HM/EXP=1069866415/A=1853618/R=0/*http://www.netflix.com/Def
ault?mqso=60178338&partid=4116732> click here

<http://us.adserver.yahoo.com/l?M=267637.4116732.5333197.1261774/D=egroupmai
l/S=:HM/A=1853618/rand=660196762>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



------------------------ Yahoo! Groups Sponsor ---------------------~--> Buy
Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark Printer
at MyInks.com. Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/PhFolB/TM
---------------------------------------------------------------------~->

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--- ## Post #219 by @system
I had the same issue and tried the same things. I found out after many attempts that after Windows 3.11 Windows controls the com ports. Even when using an emulator, the OS still controls the com ports. We had bar code readers that only worked in Windows 3.11 as well as an Electronic Time clock that used software to download the data via a com port. We had to replace all of it.

Your best bet is going to be the previous suggestion of setting up the DOS client to connect to your Domain. We created boot disks so that we could boot older machines to dos and then back them up over the network to our 2003 Domain. Works fine. I would send you more details but the network admin that set it up is gone now.



-----Original Message-----
From: Jessee Holmes [mailto:jholmes@...]
Sent: Tuesday, November 25, 2003 1:08 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Another Windows 2003 Question


Yeah, I tried that too ... And I really don't understand why???? But it
still doesn't work. The software can't communicate with the machine when
running another OS EVEN when running 3.11 through virtual PC.

I have a big beef with programmers that won't follow standards, I have a ton
of other things like that that were built with 3.11 in mind but works with
anything else!

Thanks for the idea though, appreciate it.

The only option now that I can think of is somehow sabotaging the machine
(dynamite comes to mind) so then they HAVE to buy another. Hmmmmmm ...
(evil thoughts) Mwaaa ha ha ha!

Evil Jessee Holmes

-----Original Message-----
From: Michael Barry [mailto:mbarry@...]
Sent: Tuesday, November 25, 2003 11:42 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Another Windows 2003 Question


Jessee,

Here's an idea...you can upgrade the machine to a bronze age OS and run your
program in a Virtual PC running Windows 3.11. You can get a copy of Virtual
PC for a little over $100 these days and it will run your app and
communicate with the press brake just like it is running on the host system.

mjb

-----Original Message-----
From: Jessee Holmes [mailto:jholmes@...]
Sent: Tuesday, November 25, 2003 9:26 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Another Windows 2003 Question

Great thanks Robert, I'll look this over.

As far as Windows 3.11 goes, I guess I should have explained a little
more... YES, I would love to upgrade to even Windows 95 (ha-ha, sad; no but
seriously anything but 3.11). Although, I cannot unfortunately due to a
program that will only run in Windows 3.11. I once tried upgrading the
machine to Windows 2000 thinking that I could run some dos emulator or 3.11
emulator but for some reason it didn't work cause the software needs to
communicate with a press brake machine.

So I tried tracking down and calling the developers of this software (which
was extremely difficult) and go figure, they went bankrupt and the developer
didn't want to talk to me (I guess he's too good for that now). So, pretty
much I have a VERY expensive piece of ..... something .... on my hands that
I have to continue to support. UGH I love my job!


So that's my story. That's why I haven't gone and spent a hundred bucks to
upgrade the *&$%$ machine ... and that's why im seeing if anyone else out
there has all ready gone through this Microsoft mess.

Jessee Holmes

-----Original Message-----
From: Robert Bruton [mailto:bob@...]
Sent: Tuesday, November 25, 2003 11:06 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Another Windows 2003 Question


B I G disclaimer: This information is from neurons that haven't fired in a
L O N G time.

Seems to me that Win 3.11 loaded the network drivers at the DOS level when
booting, before windows started. If that is so I am running a DOS 6.?
computer using the Microsoft TCP/IP drivers/client. They are working. This
computer
runs a program from Point Control for downloading CNC programs to our
machines. It connects to a W2K server.
I'm running AD in mixed mode.
I believe I got the client off of a WinNT4.0 Server CD. Not sure.

Here's Autoexec.bat and Config.sys (haven't messed with those in a while!)

C:\NET\net initialize
@echo off
C:\NET\nwlink
prompt $p$g
set dircmd=/o/p
path C:\NET;c:\;c:\dos
C:\NET\netbind.com
C:\NET\umb.com
C:\NET\tcptsr.exe
C:\NET\tinyrfc.exe
C:\NET\nmtsr.exe
C:\NET\emsbfr.exe
C:\NET\net start
MENU

DEVICE=C:\QEMM\QEMM386.SYS aram=de00-dfff R:1 ram sh:n
device=c:\qemm\dos-up.sys @c:\qemm\dos-up.dat DEVICE=C:\QEMM\LOADHI.SYS /R:1
/SIZE=9328 C:\DOS\ANSI.SYS FILES=60 BUFFERS=25 SHELL=C:\QEMM\LOADHI.COM /R:2
C:\DOS\COMMAND.COM C:\DOS\ /e:1024/p STACKS=9,256 LASTDRIVE=Z

device=C:\NET\ifshlp.sys


-----Original Message-----
From: Jessee Holmes [mailto:jholmes@...]
Sent: Tuesday, November 25, 2003 10:42 AM
To: vantage@yahoogroups.com
Subject: [Vantage] OT: Another Windows 2003 Question


All right, now don't laugh (too hard); but does anyone have any experiences
(bad or good) connecting a Windows 3.11 machine (yes, that's right, 3.11,
I'm ashamed) to a Windows 2003 Server?

I've been "hearing" it can't be done, as well as connecting Windows 95
machines; however, I got my windows 95 machine to connect by disabling a
security protocol called SMB (which 3.11, NT 3.51 and 95 have no support
for). Windows 3.11, I figured, should work now like 95 does, but for some
reason my 3.11 test client I have just won't connect (grrrr! No Connecting
and Monopoly Microsoft make Jessee go something something something).

Hmmmm, Google Groups isn't being of help anymore either, so I'm seeing if
anyone else in this group has had a simular "experience".

Thanks for any info provided,
Jessee Holmes



Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/SIG=12cof4o8s/M=267637.4116730.5333196.1261774/D=egroup
web/S=1705007183:HM/EXP=1069864946/A=1853619/R=0/*http://www.netflix.com/Def
ault?mqso=60178356&partid=4116730> click here

<http://us.adserver.yahoo.com/l?M=267637.4116730.5333196.1261774/D=egroupmai
l/S=:HM/A=1853619/rand=647152455>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/SIG=12c7i5pfk/M=267637.4116732.5333197.1261774/D=egroup
web/S=1705007183:HM/EXP=1069866415/A=1853618/R=0/*http://www.netflix.com/Def
ault?mqso=60178338&partid=4116732> click here

<http://us.adserver.yahoo.com/l?M=267637.4116732.5333197.1261774/D=egroupmai
l/S=:HM/A=1853618/rand=660196762>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/



------------------------ Yahoo! Groups Sponsor ---------------------~--> Buy
Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark Printer
at MyInks.com. Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/PhFolB/TM
---------------------------------------------------------------------~->

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--- ## Post #220 by @system
Just an idea here: I made a program with Visual Basic 4 to transfer
files to/from our flame cut machine. Could you write something yourself
to do what this poorly written (in your description) program does? Or
would that be too much work?

Juliet

-----Original Message-----
From: Jessee Holmes [mailto:jholmes@...]
Sent: Tuesday, November 25, 2003 12:08 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Another Windows 2003 Question


Yeah, I tried that too ... And I really don't understand why???? But it
still doesn't work. The software can't communicate with the machine
when
running another OS EVEN when running 3.11 through virtual PC.

I have a big beef with programmers that won't follow standards, I have a
ton
of other things like that that were built with 3.11 in mind but works
with
anything else!

Thanks for the idea though, appreciate it.

The only option now that I can think of is somehow sabotaging the
machine
(dynamite comes to mind) so then they HAVE to buy another. Hmmmmmm ...
(evil thoughts) Mwaaa ha ha ha!

Evil Jessee Holmes

-----Original Message-----
From: Michael Barry [mailto:mbarry@...]
Sent: Tuesday, November 25, 2003 11:42 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Another Windows 2003 Question


Jessee,

Here's an idea...you can upgrade the machine to a bronze age OS and run
your
program in a Virtual PC running Windows 3.11. You can get a copy of
Virtual
PC for a little over $100 these days and it will run your app and
communicate with the press brake just like it is running on the host
system.

mjb

-----Original Message-----
From: Jessee Holmes [mailto:jholmes@...]
Sent: Tuesday, November 25, 2003 9:26 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Another Windows 2003 Question

Great thanks Robert, I'll look this over.

As far as Windows 3.11 goes, I guess I should have explained a little
more... YES, I would love to upgrade to even Windows 95 (ha-ha, sad; no
but
seriously anything but 3.11). Although, I cannot unfortunately due to a
program that will only run in Windows 3.11. I once tried upgrading the
machine to Windows 2000 thinking that I could run some dos emulator or
3.11
emulator but for some reason it didn't work cause the software needs to
communicate with a press brake machine.

So I tried tracking down and calling the developers of this software
(which
was extremely difficult) and go figure, they went bankrupt and the
developer
didn't want to talk to me (I guess he's too good for that now). So,
pretty
much I have a VERY expensive piece of ..... something .... on my hands
that
I have to continue to support. UGH I love my job!


So that's my story. That's why I haven't gone and spent a hundred bucks
to
upgrade the *&$%$ machine ... and that's why im seeing if anyone else
out
there has all ready gone through this Microsoft mess.

Jessee Holmes

-----Original Message-----
From: Robert Bruton [mailto:bob@...]
Sent: Tuesday, November 25, 2003 11:06 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Another Windows 2003 Question


B I G disclaimer: This information is from neurons that haven't fired
in a
L O N G time.

Seems to me that Win 3.11 loaded the network drivers at the DOS level
when
booting, before windows started. If that is so I am running a DOS 6.?
computer using the Microsoft TCP/IP drivers/client. They are working.
This
computer
runs a program from Point Control for downloading CNC programs to our
machines. It connects to a W2K server.
I'm running AD in mixed mode.
I believe I got the client off of a WinNT4.0 Server CD. Not sure.

Here's Autoexec.bat and Config.sys (haven't messed with those in a
while!)

C:\NET\net initialize
@echo off
C:\NET\nwlink
prompt $p$g
set dircmd=/o/p
path C:\NET;c:\;c:\dos
C:\NET\netbind.com
C:\NET\umb.com
C:\NET\tcptsr.exe
C:\NET\tinyrfc.exe
C:\NET\nmtsr.exe
C:\NET\emsbfr.exe
C:\NET\net start
MENU

DEVICE=C:\QEMM\QEMM386.SYS aram=de00-dfff R:1 ram sh:n
device=c:\qemm\dos-up.sys @c:\qemm\dos-up.dat DEVICE=C:\QEMM\LOADHI.SYS
/R:1
/SIZE=9328 C:\DOS\ANSI.SYS FILES=60 BUFFERS=25 SHELL=C:\QEMM\LOADHI.COM
/R:2
C:\DOS\COMMAND.COM C:\DOS\ /e:1024/p STACKS=9,256 LASTDRIVE=Z

device=C:\NET\ifshlp.sys


-----Original Message-----
From: Jessee Holmes [mailto:jholmes@...]
Sent: Tuesday, November 25, 2003 10:42 AM
To: vantage@yahoogroups.com
Subject: [Vantage] OT: Another Windows 2003 Question


All right, now don't laugh (too hard); but does anyone have any
experiences
(bad or good) connecting a Windows 3.11 machine (yes, that's right,
3.11,
I'm ashamed) to a Windows 2003 Server?

I've been "hearing" it can't be done, as well as connecting Windows 95
machines; however, I got my windows 95 machine to connect by disabling a
security protocol called SMB (which 3.11, NT 3.51 and 95 have no support
for). Windows 3.11, I figured, should work now like 95 does, but for
some
reason my 3.11 test client I have just won't connect (grrrr! No
Connecting
and Monopoly Microsoft make Jessee go something something something).

Hmmmm, Google Groups isn't being of help anymore either, so I'm seeing
if
anyone else in this group has had a simular "experience".

Thanks for any info provided,
Jessee Holmes



Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/SIG=12cof4o8s/M=267637.4116730.5333196.1261774/D=eg
roup
web/S=1705007183:HM/EXP=1069864946/A=1853619/R=0/*http://www.netflix.com
/Def
ault?mqso=60178356&partid=4116730> click here

<http://us.adserver.yahoo.com/l?M=267637.4116730.5333196.1261774/D=egrou
pmai
l/S=:HM/A=1853619/rand=647152455>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/SIG=12c7i5pfk/M=267637.4116732.5333197.1261774/D=eg
roup
web/S=1705007183:HM/EXP=1069866415/A=1853618/R=0/*http://www.netflix.com
/Def
ault?mqso=60178338&partid=4116732> click here

<http://us.adserver.yahoo.com/l?M=267637.4116732.5333197.1261774/D=egrou
pmai
l/S=:HM/A=1853618/rand=660196762>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
--- ## Post #221 by @system
Thats a good idea. I was able to upgrade one application that used ProComm as the communications software. I upgraded to Procomm for Windows and made some changes to the scripts. It worked fine. Do you know what communication program it is using?


-----Original Message-----
From: Juliet Martin [mailto:jmartin@...]
Sent: Tuesday, November 25, 2003 1:28 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Another Windows 2003 Question


Just an idea here: I made a program with Visual Basic 4 to transfer
files to/from our flame cut machine. Could you write something yourself
to do what this poorly written (in your description) program does? Or
would that be too much work?

Juliet

-----Original Message-----
From: Jessee Holmes [mailto:jholmes@...]
Sent: Tuesday, November 25, 2003 12:08 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Another Windows 2003 Question


Yeah, I tried that too ... And I really don't understand why???? But it
still doesn't work. The software can't communicate with the machine
when
running another OS EVEN when running 3.11 through virtual PC.

I have a big beef with programmers that won't follow standards, I have a
ton
of other things like that that were built with 3.11 in mind but works
with
anything else!

Thanks for the idea though, appreciate it.

The only option now that I can think of is somehow sabotaging the
machine
(dynamite comes to mind) so then they HAVE to buy another. Hmmmmmm ...
(evil thoughts) Mwaaa ha ha ha!

Evil Jessee Holmes

-----Original Message-----
From: Michael Barry [mailto:mbarry@...]
Sent: Tuesday, November 25, 2003 11:42 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Another Windows 2003 Question


Jessee,

Here's an idea...you can upgrade the machine to a bronze age OS and run
your
program in a Virtual PC running Windows 3.11. You can get a copy of
Virtual
PC for a little over $100 these days and it will run your app and
communicate with the press brake just like it is running on the host
system.

mjb

-----Original Message-----
From: Jessee Holmes [mailto:jholmes@...]
Sent: Tuesday, November 25, 2003 9:26 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Another Windows 2003 Question

Great thanks Robert, I'll look this over.

As far as Windows 3.11 goes, I guess I should have explained a little
more... YES, I would love to upgrade to even Windows 95 (ha-ha, sad; no
but
seriously anything but 3.11). Although, I cannot unfortunately due to a
program that will only run in Windows 3.11. I once tried upgrading the
machine to Windows 2000 thinking that I could run some dos emulator or
3.11
emulator but for some reason it didn't work cause the software needs to
communicate with a press brake machine.

So I tried tracking down and calling the developers of this software
(which
was extremely difficult) and go figure, they went bankrupt and the
developer
didn't want to talk to me (I guess he's too good for that now). So,
pretty
much I have a VERY expensive piece of ..... something .... on my hands
that
I have to continue to support. UGH I love my job!


So that's my story. That's why I haven't gone and spent a hundred bucks
to
upgrade the *&$%$ machine ... and that's why im seeing if anyone else
out
there has all ready gone through this Microsoft mess.

Jessee Holmes

-----Original Message-----
From: Robert Bruton [mailto:bob@...]
Sent: Tuesday, November 25, 2003 11:06 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Another Windows 2003 Question


B I G disclaimer: This information is from neurons that haven't fired
in a
L O N G time.

Seems to me that Win 3.11 loaded the network drivers at the DOS level
when
booting, before windows started. If that is so I am running a DOS 6.?
computer using the Microsoft TCP/IP drivers/client. They are working.
This
computer
runs a program from Point Control for downloading CNC programs to our
machines. It connects to a W2K server.
I'm running AD in mixed mode.
I believe I got the client off of a WinNT4.0 Server CD. Not sure.

Here's Autoexec.bat and Config.sys (haven't messed with those in a
while!)

C:\NET\net initialize
@echo off
C:\NET\nwlink
prompt $p$g
set dircmd=/o/p
path C:\NET;c:\;c:\dos
C:\NET\netbind.com
C:\NET\umb.com
C:\NET\tcptsr.exe
C:\NET\tinyrfc.exe
C:\NET\nmtsr.exe
C:\NET\emsbfr.exe
C:\NET\net start
MENU

DEVICE=C:\QEMM\QEMM386.SYS aram=de00-dfff R:1 ram sh:n
device=c:\qemm\dos-up.sys @c:\qemm\dos-up.dat DEVICE=C:\QEMM\LOADHI.SYS
/R:1
/SIZE=9328 C:\DOS\ANSI.SYS FILES=60 BUFFERS=25 SHELL=C:\QEMM\LOADHI.COM
/R:2
C:\DOS\COMMAND.COM C:\DOS\ /e:1024/p STACKS=9,256 LASTDRIVE=Z

device=C:\NET\ifshlp.sys


-----Original Message-----
From: Jessee Holmes [mailto:jholmes@...]
Sent: Tuesday, November 25, 2003 10:42 AM
To: vantage@yahoogroups.com
Subject: [Vantage] OT: Another Windows 2003 Question


All right, now don't laugh (too hard); but does anyone have any
experiences
(bad or good) connecting a Windows 3.11 machine (yes, that's right,
3.11,
I'm ashamed) to a Windows 2003 Server?

I've been "hearing" it can't be done, as well as connecting Windows 95
machines; however, I got my windows 95 machine to connect by disabling a
security protocol called SMB (which 3.11, NT 3.51 and 95 have no support
for). Windows 3.11, I figured, should work now like 95 does, but for
some
reason my 3.11 test client I have just won't connect (grrrr! No
Connecting
and Monopoly Microsoft make Jessee go something something something).

Hmmmm, Google Groups isn't being of help anymore either, so I'm seeing
if
anyone else in this group has had a simular "experience".

Thanks for any info provided,
Jessee Holmes



Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/SIG=12cof4o8s/M=267637.4116730.5333196.1261774/D=eg
roup
web/S=1705007183:HM/EXP=1069864946/A=1853619/R=0/*http://www.netflix.com
/Def
ault?mqso=60178356&partid=4116730> click here

<http://us.adserver.yahoo.com/l?M=267637.4116730.5333196.1261774/D=egrou
pmai
l/S=:HM/A=1853619/rand=647152455>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/SIG=12c7i5pfk/M=267637.4116732.5333197.1261774/D=eg
roup
web/S=1705007183:HM/EXP=1069866415/A=1853618/R=0/*http://www.netflix.com
/Def
ault?mqso=60178338&partid=4116732> click here

<http://us.adserver.yahoo.com/l?M=267637.4116732.5333197.1261774/D=egrou
pmai
l/S=:HM/A=1853618/rand=660196762>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
--- ## Post #222 by @system
I'd love to write something, but I have no idea how to communicate to that
machine for one, and two this program is quite complicated for me to sit
down and write. So, I was hoping at one time that the original developer
would just let me use or have the original source code, even for a small
price. So I could modify it.

But nope, the guy was a complete .... whets the word im thinking of ... OH
YEAH!; anyways, he wouldn't even talk to me (wow, technical support that
actually is worse than Dell's, amazing, didn't think it could be done).

So, all in all, yeah too complicated to write and I agree the DOS idea is
sounding pretty good right about now.

Jessee Holmes

-----Original Message-----
From: Juliet Martin [mailto:jmartin@...]
Sent: Tuesday, November 25, 2003 12:28 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Another Windows 2003 Question


Just an idea here: I made a program with Visual Basic 4 to transfer
files to/from our flame cut machine. Could you write something yourself
to do what this poorly written (in your description) program does? Or
would that be too much work?

Juliet

-----Original Message-----
From: Jessee Holmes [mailto:jholmes@...]
Sent: Tuesday, November 25, 2003 12:08 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Another Windows 2003 Question


Yeah, I tried that too ... And I really don't understand why???? But it
still doesn't work. The software can't communicate with the machine
when
running another OS EVEN when running 3.11 through virtual PC.

I have a big beef with programmers that won't follow standards, I have a
ton
of other things like that that were built with 3.11 in mind but works
with
anything else!

Thanks for the idea though, appreciate it.

The only option now that I can think of is somehow sabotaging the
machine
(dynamite comes to mind) so then they HAVE to buy another. Hmmmmmm ...
(evil thoughts) Mwaaa ha ha ha!

Evil Jessee Holmes

-----Original Message-----
From: Michael Barry [mailto:mbarry@...]
Sent: Tuesday, November 25, 2003 11:42 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Another Windows 2003 Question


Jessee,

Here's an idea...you can upgrade the machine to a bronze age OS and run
your
program in a Virtual PC running Windows 3.11. You can get a copy of
Virtual
PC for a little over $100 these days and it will run your app and
communicate with the press brake just like it is running on the host
system.

mjb

-----Original Message-----
From: Jessee Holmes [mailto:jholmes@...]
Sent: Tuesday, November 25, 2003 9:26 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Another Windows 2003 Question

Great thanks Robert, I'll look this over.

As far as Windows 3.11 goes, I guess I should have explained a little
more... YES, I would love to upgrade to even Windows 95 (ha-ha, sad; no
but
seriously anything but 3.11). Although, I cannot unfortunately due to a
program that will only run in Windows 3.11. I once tried upgrading the
machine to Windows 2000 thinking that I could run some dos emulator or
3.11
emulator but for some reason it didn't work cause the software needs to
communicate with a press brake machine.

So I tried tracking down and calling the developers of this software
(which
was extremely difficult) and go figure, they went bankrupt and the
developer
didn't want to talk to me (I guess he's too good for that now). So,
pretty
much I have a VERY expensive piece of ..... something .... on my hands
that
I have to continue to support. UGH I love my job!


So that's my story. That's why I haven't gone and spent a hundred bucks
to
upgrade the *&$%$ machine ... and that's why im seeing if anyone else
out
there has all ready gone through this Microsoft mess.

Jessee Holmes

-----Original Message-----
From: Robert Bruton [mailto:bob@...]
Sent: Tuesday, November 25, 2003 11:06 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] OT: Another Windows 2003 Question


B I G disclaimer: This information is from neurons that haven't fired
in a
L O N G time.

Seems to me that Win 3.11 loaded the network drivers at the DOS level
when
booting, before windows started. If that is so I am running a DOS 6.?
computer using the Microsoft TCP/IP drivers/client. They are working.
This
computer
runs a program from Point Control for downloading CNC programs to our
machines. It connects to a W2K server.
I'm running AD in mixed mode.
I believe I got the client off of a WinNT4.0 Server CD. Not sure.

Here's Autoexec.bat and Config.sys (haven't messed with those in a
while!)

C:\NET\net initialize
@echo off
C:\NET\nwlink
prompt $p$g
set dircmd=/o/p
path C:\NET;c:\;c:\dos
C:\NET\netbind.com
C:\NET\umb.com
C:\NET\tcptsr.exe
C:\NET\tinyrfc.exe
C:\NET\nmtsr.exe
C:\NET\emsbfr.exe
C:\NET\net start
MENU

DEVICE=C:\QEMM\QEMM386.SYS aram=de00-dfff R:1 ram sh:n
device=c:\qemm\dos-up.sys @c:\qemm\dos-up.dat DEVICE=C:\QEMM\LOADHI.SYS
/R:1
/SIZE=9328 C:\DOS\ANSI.SYS FILES=60 BUFFERS=25 SHELL=C:\QEMM\LOADHI.COM
/R:2
C:\DOS\COMMAND.COM C:\DOS\ /e:1024/p STACKS=9,256 LASTDRIVE=Z

device=C:\NET\ifshlp.sys


-----Original Message-----
From: Jessee Holmes [mailto:jholmes@...]
Sent: Tuesday, November 25, 2003 10:42 AM
To: vantage@yahoogroups.com
Subject: [Vantage] OT: Another Windows 2003 Question


All right, now don't laugh (too hard); but does anyone have any
experiences
(bad or good) connecting a Windows 3.11 machine (yes, that's right,
3.11,
I'm ashamed) to a Windows 2003 Server?

I've been "hearing" it can't be done, as well as connecting Windows 95
machines; however, I got my windows 95 machine to connect by disabling a
security protocol called SMB (which 3.11, NT 3.51 and 95 have no support
for). Windows 3.11, I figured, should work now like 95 does, but for
some
reason my 3.11 test client I have just won't connect (grrrr! No
Connecting
and Monopoly Microsoft make Jessee go something something something).

Hmmmm, Google Groups isn't being of help anymore either, so I'm seeing
if
anyone else in this group has had a simular "experience".

Thanks for any info provided,
Jessee Holmes



Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/SIG=12cof4o8s/M=267637.4116730.5333196.1261774/D=eg
roup
web/S=1705007183:HM/EXP=1069864946/A=1853619/R=0/*http://www.netflix.com
/Def
ault?mqso=60178356&partid=4116730> click here

<http://us.adserver.yahoo.com/l?M=267637.4116730.5333196.1261774/D=egrou
pmai
l/S=:HM/A=1853619/rand=647152455>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]



Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/SIG=12c7i5pfk/M=267637.4116732.5333197.1261774/D=eg
roup
web/S=1705007183:HM/EXP=1069866415/A=1853618/R=0/*http://www.netflix.com
/Def
ault?mqso=60178338&partid=4116732> click here

<http://us.adserver.yahoo.com/l?M=267637.4116732.5333197.1261774/D=egrou
pmai
l/S=:HM/A=1853618/rand=660196762>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/




Yahoo! Groups Sponsor

ADVERTISEMENT

<http://rd.yahoo.com/SIG=12c0a1vck/M=267637.4116732.5333197.1261774/D=egroup
web/S=1705007183:HM/EXP=1069871243/A=1853619/R=0/*http://www.netflix.com/Def
ault?mqso=60178356&partid=4116732> click here

<http://us.adserver.yahoo.com/l?M=267637.4116732.5333197.1261774/D=egroupmai
l/S=:HM/A=1853619/rand=208582281>

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #223 by @system
I am trying to create a report that will show me all employees with
more than 8 total pay hours in any given day. Each employee has up
to two lines of clock in time (before lunch and after lunch). Can
anyone explain to me why report building would be pulling in more
records than what is actually in Vantage.

For instance:
When I look in Vantage Doug Cook has two clock ins/outs (6:00 -
12:15 and 12:45 - 14:30) but when I generate the report it is pulling
in 6 clock ins/out.

And there are two other employees that this happens to and several
that is doesn't happen to.

Any help would be greatly appreciated!!!

Joan Farver
Vantage Plastics
--- ## Post #224 by @system
Are you pulling in your data from the labordtl table or the labored table?
--- ## Post #225 by @system
Is there a way to use a 'filtered' value in a calculation? If anyone
out there knows if this is possible and how to do it your help would
be appreciated.

Thanks,

Mark Smith
--- ## Post #226 by @system
You can "parse" a value out of the filter and use it in things like headings so I see no reason why not in a calculation...except where agregates are involved because in order to get the value out of the filter you need to manipulate it via an aggregate snd RB gets touchy about how aggregates are used. But in general I use values passed via the filter all the time and often in calculations (such as passing a criteria for showing certain data or not).
-Todd C.


-----Original Message-----
From: innerpac_il [mailto:mark_smith@...]
Sent: Tuesday, December 23, 2003 11:27 AM
To: vantage@yahoogroups.com
Subject: [Vantage] RE: Report Builder


Is there a way to use a 'filtered' value in a calculation? If anyone
out there knows if this is possible and how to do it your help would
be appreciated.

Thanks,

Mark Smith



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links



Yahoo! Groups Sponsor

ADVERTISEMENT
<http://rd.yahoo.com/SIG=12c4nak62/M=266841.4316200.5507732.1261774/D=egroupweb/S=1705007183:HM/EXP=1072286858/A=1911858/R=0/*http://www.lifescapeinc.com/picasa/landing.php?capid=222&caId=1987> click here
<http://us.adserver.yahoo.com/l?M=266841.4316200.5507732.1261774/D=egroupmail/S=:HM/A=1911858/rand=630551602>


_____

Yahoo! Groups Links


* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #227 by @system
Todd:



How do I parse a value out of the filter?



-----Original Message-----
From: Todd Caughey [mailto:caugheyt@...]
Sent: Tuesday, December 23, 2003 12:10 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] RE: Report Builder



You can "parse" a value out of the filter and use it in things like
headings so I see no reason why not in a calculation...except where
agregates are involved because in order to get the value out of the
filter you need to manipulate it via an aggregate snd RB gets touchy
about how aggregates are used. But in general I use values passed via
the filter all the time and often in calculations (such as passing a
criteria for showing certain data or not).
-Todd C.


-----Original Message-----
From: innerpac_il [mailto:mark_smith@...]
Sent: Tuesday, December 23, 2003 11:27 AM
To: vantage@yahoogroups.com
Subject: [Vantage] RE: Report Builder


Is there a way to use a 'filtered' value in a calculation? If anyone
out there knows if this is possible and how to do it your help would
be appreciated.

Thanks,

Mark Smith



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links



Yahoo! Groups Sponsor

ADVERTISEMENT
<http://rd.yahoo.com/SIG=12c4nak62/M=266841.4316200.5507732.1261774/D=eg
roupweb/S=1705007183:HM/EXP=1072286858/A=1911858/R=0/*http://www.lifesca
peinc.com/picasa/landing.php?capid=222
<http://rd.yahoo.com/SIG=12c4nak62/M=266841.4316200.5507732.1261774/D=eg
roupweb/S=1705007183:HM/EXP=1072286858/A=1911858/R=0/*http:/www.lifescap
einc.com/picasa/landing.php?capid=222&caId=1987> &caId=1987> click here


<http://us.adserver.yahoo.com/l?M=266841.4316200.5507732.1261774/D=egrou
pmail/S=:HM/A=1911858/rand=630551602>


_____

Yahoo! Groups Links


* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links



_____

Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
<http://docs.yahoo.com/info/terms/> Service.



[Non-text portions of this message have been removed]
--- ## Post #228 by @system
I sent some instructions off-list - probably crossed paths in the ether.
-Todd C.

-----Original Message-----
From: Mark Smith [mailto:mark_smith@...]
Sent: Tuesday, December 23, 2003 12:22 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] RE: Report Builder


Todd:



How do I parse a value out of the filter?



-----Original Message-----
From: Todd Caughey [mailto:caugheyt@...]
Sent: Tuesday, December 23, 2003 12:10 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] RE: Report Builder



You can "parse" a value out of the filter and use it in things like
headings so I see no reason why not in a calculation...except where
agregates are involved because in order to get the value out of the
filter you need to manipulate it via an aggregate snd RB gets touchy
about how aggregates are used. But in general I use values passed via
the filter all the time and often in calculations (such as passing a
criteria for showing certain data or not).
-Todd C.


-----Original Message-----
From: innerpac_il [mailto:mark_smith@...]
Sent: Tuesday, December 23, 2003 11:27 AM
To: vantage@yahoogroups.com
Subject: [Vantage] RE: Report Builder


Is there a way to use a 'filtered' value in a calculation? If anyone
out there knows if this is possible and how to do it your help would
be appreciated.

Thanks,

Mark Smith



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
< http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links



Yahoo! Groups Sponsor

ADVERTISEMENT
< http://rd.yahoo.com/SIG=12c4nak62/M=266841.4316200.5507732.1261774/D=eg
roupweb/S=1705007183:HM/EXP=1072286858/A=1911858/R=0/* http://www.lifesca
peinc.com/picasa/landing.php?capid=222
< http://rd.yahoo.com/SIG=12c4nak62/M=266841.4316200.5507732.1261774/D=eg
roupweb/S=1705007183:HM/EXP=1072286858/A=1911858/R=0/*http:/www.lifescap
einc.com/picasa/landing.php?capid=222&caId=1987> &caId=1987> click here


< http://us.adserver.yahoo.com/l?M=266841.4316200.5507732.1261774/D=egrou
pmail/S=:HM/A=1911858/rand=630551602>


_____

Yahoo! Groups Links


* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service < http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
< http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links



_____

Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
< http://docs.yahoo.com/info/terms/> Service.



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links



_____

Yahoo! Groups Links


* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #229 by @system
Can anybody tell that I've been designated the "report creater"?
Ohy-vey!!! How do I get myself into these piclkes????

Anyway, I am creating a report to show efficiency rates and scrap
rates per machine (we have 6 of them). I put in a calculated field
to calculate the total scrap rate. It works perfectly on some
machines but returns a "???????" value for others. Does anybody know
why this would be like this?

Thanks again!

Joan Farver
Vantage Plastics
--- ## Post #230 by @system
Increase the quantity of digits in the format of that particular field.

RG
-----Original Message-----
From: joanfarver [mailto:joan.farver@...]
Sent: Wednesday, January 14, 2004 9:57 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder


Can anybody tell that I've been designated the "report creater"?
Ohy-vey!!! How do I get myself into these piclkes????

Anyway, I am creating a report to show efficiency rates and scrap
rates per machine (we have 6 of them). I put in a calculated field
to calculate the total scrap rate. It works perfectly on some
machines but returns a "???????" value for others. Does anybody know
why this would be like this?

Thanks again!

Joan Farver
Vantage Plastics




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links



----------------------------------------------------------------------------
--
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

b.. To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]
--- ## Post #231 by @system
Go into your calculated field and check the format, decimal places and
such. Also while you are there change the "unknown" field character to
something else. If the "???????" is the result of an unknown field then
change the joins related to your calculated field to LEFT OUTER JOINS.

Shirley

-----Original Message-----
From: joanfarver [mailto:joan.farver@...]
Sent: Wednesday, January 14, 2004 9:57 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder

Can anybody tell that I've been designated the "report creater"?
Ohy-vey!!! How do I get myself into these piclkes????

Anyway, I am creating a report to show efficiency rates and scrap
rates per machine (we have 6 of them). I put in a calculated field
to calculate the total scrap rate. It works perfectly on some
machines but returns a "???????" value for others. Does anybody know
why this would be like this?

Thanks again!

Joan Farver
Vantage Plastics




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links


_____

Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
<http://docs.yahoo.com/info/terms/> Service.

Tracking #: 694BA107402E1A43A5B152CAE128BCF7F1CF37E3


[Non-text portions of this message have been removed]
--- ## Post #232 by @system
Could be a zero divide or format width of the field.

Patrick Winter


-----Original Message-----
From: joanfarver [mailto:joan.farver@...]
Sent: Wednesday, January 14, 2004 8:57 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder


Can anybody tell that I've been designated the "report creater"?
Ohy-vey!!! How do I get myself into these piclkes????

Anyway, I am creating a report to show efficiency rates and scrap
rates per machine (we have 6 of them). I put in a calculated field
to calculate the total scrap rate. It works perfectly on some
machines but returns a "???????" value for others. Does anybody know
why this would be like this?

Thanks again!

Joan Farver
Vantage Plastics



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

Yahoo! Groups Links

To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
--- ## Post #233 by @system
Hello All,



I'm trying to write a report that will pull parts from Company A that
are not in Company B and I'm stuck. Does anybody know how to accomplish
this? TIA



Mark



[Non-text portions of this message have been removed]
--- ## Post #234 by @system
You could try defining the Part table again and alias it as Part2. Then for each part with Company A force a link to Part2 with keys of "Company B" (set a variable) and the PartNum (outer join to get "unknowns"). Then any that come up with Part2.PartNum = ? will be the ones to report on. I think this would work.
-Todd C.

-----Original Message-----
From: Mark Caldwell [mailto:mcaldwell@...]
Sent: Wednesday, February 11, 2004 7:46 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder


Hello All,



I'm trying to write a report that will pull parts from Company A that
are not in Company B and I'm stuck. Does anybody know how to accomplish
this? TIA



Mark



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links



Yahoo! Groups Sponsor

ADVERTISEMENT
<http://rd.yahoo.com/SIG=12ca6cvee/M=267637.4521690.5694157.1261774/D=egroupweb/S=1705007183:HM/EXP=1076593779/A=1945638/R=0/*http://www.netflix.com/Default?mqso=60178383&partid=4521690> click here
<http://us.adserver.yahoo.com/l?M=267637.4521690.5694157.1261774/D=egroupweb/S=:HM/A=1945638/rand=648970243>


_____

Yahoo! Groups Links


* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #235 by @system
Todd, sorry I'm pretty new to report builder, how do I define the part
table and alias it?

Mark



-----Original Message-----
From: Todd Caughey [mailto:caugheyt@...]
Sent: Wednesday, February 11, 2004 8:59 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder



You could try defining the Part table again and alias it as Part2. Then
for each part with Company A force a link to Part2 with keys of "Company
B" (set a variable) and the PartNum (outer join to get "unknowns").
Then any that come up with Part2.PartNum = ? will be the ones to report
on. I think this would work.
-Todd C.

-----Original Message-----
From: Mark Caldwell [mailto:mcaldwell@...]
Sent: Wednesday, February 11, 2004 7:46 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder


Hello All,



I'm trying to write a report that will pull parts from Company A that
are not in Company B and I'm stuck. Does anybody know how to accomplish
this? TIA



Mark



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links



Yahoo! Groups Sponsor

ADVERTISEMENT
<http://rd.yahoo.com/SIG=12ca6cvee/M=267637.4521690.5694157.1261774/D=eg
roupweb/S=1705007183:HM/EXP=1076593779/A=1945638/R=0/*http://www.netflix
.com/Default?mqso=60178383&partid=4521690
<http://rd.yahoo.com/SIG=12ca6cvee/M=267637.4521690.5694157.1261774/D=eg
roupweb/S=1705007183:HM/EXP=1076593779/A=1945638/R=0/*http:/www.netflix.
com/Default?mqso=60178383&partid=4521690> > click here

<http://us.adserver.yahoo.com/l?M=267637.4521690.5694157.1261774/D=egrou
pweb/S=:HM/A=1945638/rand=648970243>


_____

Yahoo! Groups Links


* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links





Yahoo! Groups Sponsor

ADVERTISEMENT
click here
<http://rd.yahoo.com/SIG=12c7er835/M=267637.4521717.5694185.1261774/D=eg
roupweb/S=1705007183:HM/EXP=1076594433/A=1945637/R=0/*http:/www.netflix.
com/Default?mqso=60178397&partid=4521717>


<http://us.adserver.yahoo.com/l?M=267637.4521717.5694185.1261774/D=egrou
pweb/S=:HM/A=1945637/rand=124843410>



_____

Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .



[Non-text portions of this message have been removed]
--- ## Post #236 by @system
Create a report using the PART table.
Filter out other company's if they exist.
Sort by company, part
Create a calculated field:
CheckVar = IIF(Part.PartNum <> PREVIOUS(Part.PartNum),True,False)
I think sorting Acending/Decending on Company will give you Parts in A not B
or B not A
On the Record line have it Conditionally print on the calculated field
CheckVar.


Patrick Winter

-----Original Message-----
From: Mark Caldwell [mailto:mcaldwell@...]
Sent: Wednesday, February 11, 2004 7:46 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder

Hello All,



I'm trying to write a report that will pull parts from Company A that are
not in Company B and I'm stuck. Does anybody know how to accomplish this?
TIA



Mark



[Non-text portions of this message have been removed]




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
--- ## Post #237 by @system
Is it possible to have a report that has one record line but print every other line with a grey box. Picture a accounting book where the color of each line alternates. Can this be done?

Thanks,

Jasper



[Non-text portions of this message have been removed]
--- ## Post #238 by @system
Duplicate the band line and then count records in an aggregate. Set True or False on the band lines depending on odd or even count and which is to be printed. One of the bands can then have the alternate format. I've done this several times on reports.
-Todd C.


-----Original Message-----
From: Jasper Recto [mailto:jrecto@...]
Sent: Wednesday, February 18, 2004 3:36 PM
To: Vantage Groups (E-mail)
Subject: [Vantage] Report Builder


Is it possible to have a report that has one record line but print every other line with a grey box. Picture a accounting book where the color of each line alternates. Can this be done?

Thanks,

Jasper



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links



_____

Yahoo! Groups Links


* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #239 by @system
Thanks!!

Jasper

-----Original Message-----
From: Todd Caughey [mailto:caugheyt@...]
Sent: Wednesday, February 18, 2004 4:38 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder


Duplicate the band line and then count records in an aggregate. Set True or False on the band lines depending on odd or even count and which is to be printed. One of the bands can then have the alternate format. I've done this several times on reports.
-Todd C.


-----Original Message-----
From: Jasper Recto [mailto:jrecto@...]
Sent: Wednesday, February 18, 2004 3:36 PM
To: Vantage Groups (E-mail)
Subject: [Vantage] Report Builder


Is it possible to have a report that has one record line but print every other line with a grey box. Picture a accounting book where the color of each line alternates. Can this be done?

Thanks,

Jasper



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links



_____

Yahoo! Groups Links


* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
--- ## Post #240 by @system
To all,
I am building a report in the Progress report builder, and have a
formatting question.
I am creating a commercial invoice from the packing slips, and would
like to put the serial numbers on one line. Right now, I have the
report grouped by part number, and have the serial number in the
detail or 'record' section. The problem with this is, if there are
say 5 pcs, there will be 5 lines printed, each with just one serial
number.

Is there a function in the RB that allows me to pull the multiple
serial number records onto one line like on the Crystal Reports
invoice?

Thanks in advance!

Andrew
--- ## Post #241 by @system
Try creating a calculated field called "SerialNumList" and put it in the
part# footer. Something sort of like this...

IIF(partnum <> PREVIOUS(partnum),SerialNumber,SerialNumList + ", " +
SerialNumber)



-----Original Message-----
From: andrewcretors [mailto:acretors@...]
Sent: Wednesday, February 25, 2004 3:09 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder

To all,
I am building a report in the Progress report builder, and have a
formatting question.
I am creating a commercial invoice from the packing slips, and would
like to put the serial numbers on one line. Right now, I have the
report grouped by part number, and have the serial number in the
detail or 'record' section. The problem with this is, if there are
say 5 pcs, there will be 5 lines printed, each with just one serial
number.

Is there a function in the RB that allows me to pull the multiple
serial number records onto one line like on the Crystal Reports
invoice?

Thanks in advance!

Andrew
--- ## Post #242 by @system
Select the PROPERTIES drop down menu then RECORD LAYOUT, change the RECORDS
ACROSS field from 1 to 5, then select your width such as 1.5 or so.


Patrick Winter

-----Original Message-----
From: andrewcretors [mailto:acretors@...]
Sent: Wednesday, February 25, 2004 2:09 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder

To all,
I am building a report in the Progress report builder, and have a formatting
question.
I am creating a commercial invoice from the packing slips, and would like to
put the serial numbers on one line. Right now, I have the report grouped by
part number, and have the serial number in the detail or 'record' section.
The problem with this is, if there are say 5 pcs, there will be 5 lines
printed, each with just one serial number.

Is there a function in the RB that allows me to pull the multiple serial
number records onto one line like on the Crystal Reports invoice?

Thanks in advance!

Andrew



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
--- ## Post #243 by @system
Sarah,
Thanks for the input! I got it to work, and it works well!
Patrick, your idea worked too, but it did some funky formatting on
all the lines in the report, so some of the header items were
scattered about.

Thanks for the input!!

Andrew

--- In vantage@yahoogroups.com, sarah.vareschi@n... wrote:
> Try creating a calculated field called "SerialNumList" and put it
in the
> part# footer. Something sort of like this...
>
> IIF(partnum <> PREVIOUS(partnum),SerialNumber,SerialNumList + ", "
+
> SerialNumber)
>
>
>
> -----Original Message-----
> From: andrewcretors [mailto:acretors@c...]
> Sent: Wednesday, February 25, 2004 3:09 PM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Report Builder
>
> To all,
> I am building a report in the Progress report builder, and have a
> formatting question.
> I am creating a commercial invoice from the packing slips, and
would
> like to put the serial numbers on one line. Right now, I have the
> report grouped by part number, and have the serial number in the
> detail or 'record' section. The problem with this is, if there are
> say 5 pcs, there will be 5 lines printed, each with just one serial
> number.
>
> Is there a function in the RB that allows me to pull the multiple
> serial number records onto one line like on the Crystal Reports
> invoice?
>
> Thanks in advance!
>
> Andrew
--- ## Post #244 by @system
Being new....can anyone tell me a easy way to find which table a field is
located in? Example: I have purchased parts and I loaded the Vendor, the
Min Order Qty,
then the inv screen for more. I can get all the information based
on the Part Table...any suggestions or ideas.

Ron
"Paying the price" means choosing to lead and follow from conviction, rather
than reacting to circumstance.
It means taking the time to mature, placing a higher value on character
than on the short-term benefits of reaching a capacity goal.
- The Ascent of a Leader
--- ## Post #245 by @system
The Data Dictionary in System Management (bottom of the main menu) Will
guide you through the tables and fields.

Shirley

_____

From: Ron LaPean [mailto:rlapean@...]
Sent: Friday, March 05, 2004 10:34 AM
To: 'Vantage (E-mail)
Subject: [Vantage] Report Builder


Being new....can anyone tell me a easy way to find which table a field is
located in? Example: I have purchased parts and I loaded the Vendor, the
Min Order Qty,
then the inv screen for more. I can get all the information based
on the Part Table...any suggestions or ideas.

Ron
"Paying the price" means choosing to lead and follow from conviction, rather
than reacting to circumstance.
It means taking the time to mature, placing a higher value on character
than on the short-term benefits of reaching a capacity goal.
- The Ascent of a Leader



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links





Yahoo! Groups Sponsor


ADVERTISEMENT

<http://rd.yahoo.com/SIG=12cv6mfn2/M=274551.4550177.5761904.1261774/D=egroup
web/S=1705007183:HM/EXP=1078587240/A=2019528/R=2/SIG=141o6n4a7/*http:/ad.dou
bleclick.net/jump/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5;sz=300x250;code
=18634;dcopt=rcl;ord=1078500840330502?>

Click Here
<http://ad.doubleclick.net/ad/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5;sz=
300x250;code=18634;dcopt=rcl;ord=1078500840330502?> Click Here


<http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egroupweb
/S=:HM/A=2019528/rand=769316077>

_____

Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

Tracking #: 358925494EDDEE4C84899F2AB7D78F4A1B90B1C6


[Non-text portions of this message have been removed]
--- ## Post #246 by @system
thanks - appreciate your help
ron

-----Original Message-----
From: Shirley Graver [mailto:shirleyg@...]
Sent: Friday, March 05, 2004 10:04 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder


The Data Dictionary in System Management (bottom of the main menu) Will
guide you through the tables and fields.

Shirley

_____

From: Ron LaPean [mailto:rlapean@...]
Sent: Friday, March 05, 2004 10:34 AM
To: 'Vantage (E-mail)
Subject: [Vantage] Report Builder


Being new....can anyone tell me a easy way to find which table a field is
located in? Example: I have purchased parts and I loaded the Vendor, the
Min Order Qty,
then the inv screen for more. I can get all the information based
on the Part Table...any suggestions or ideas.

Ron
"Paying the price" means choosing to lead and follow from conviction, rather
than reacting to circumstance.
It means taking the time to mature, placing a higher value on character
than on the short-term benefits of reaching a capacity goal.
- The Ascent of a Leader



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/
<http://groups.yahoo.com/group/vantage/files/> >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>





Yahoo! Groups Sponsor


ADVERTISEMENT

<
http://rd.yahoo.com/SIG=12cv6mfn2/M=274551.4550177.5761904.1261774/D=egroup
<http://rd.yahoo.com/SIG=12cv6mfn2/M=274551.4550177.5761904.1261774/D=egroup
>
web/S=1705007183:HM/EXP=1078587240/A=2019528/R=2/SIG=141o6n4a7/*http:/ad.dou
bleclick.net/jump/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5;sz=300x250;code
=18634;dcopt=rcl;ord=1078500840330502?>

Click Here
<
http://ad.doubleclick.net/ad/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5;sz=
<http://ad.doubleclick.net/ad/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5;sz=
>
300x250;code=18634;dcopt=rcl;ord=1078500840330502?> Click Here


<
http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egroupweb
<http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egroupweb
>
/S=:HM/A=2019528/rand=769316077>

_____

Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
<http://groups.yahoo.com/group/vantage/>

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> > .

Tracking #: 358925494EDDEE4C84899F2AB7D78F4A1B90B1C6


[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>



_____

Yahoo! Groups Links


* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
<http://groups.yahoo.com/group/vantage/>


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #247 by @system
As a quick shortcut...

If you are on 6.0 or above and you have customize privileges. You can
find a "browse list" (looks like spreadsheet) and right click. Choose
customize and it will display all the fields available for that list in
the format "table.field".

Hope this helps. It's cut down the search for me a couple of times.

Aaron Hoyt

Hittite Microwave Corporation



-----Original Message-----
From: Shirley Graver [mailto:shirleyg@...]
Sent: Friday, March 05, 2004 11:04 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder



The Data Dictionary in System Management (bottom of the main menu) Will
guide you through the tables and fields.

Shirley

_____

From: Ron LaPean [mailto:rlapean@...]
Sent: Friday, March 05, 2004 10:34 AM
To: 'Vantage (E-mail)
Subject: [Vantage] Report Builder


Being new....can anyone tell me a easy way to find which table a field
is
located in? Example: I have purchased parts and I loaded the Vendor,
the
Min Order Qty,
then the inv screen for more. I can get all the information based
on the Part Table...any suggestions or ideas.

Ron
"Paying the price" means choosing to lead and follow from conviction,
rather
than reacting to circumstance.
It means taking the time to mature, placing a higher value on character
than on the short-term benefits of reaching a capacity goal.
- The Ascent of a Leader



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links





Yahoo! Groups Sponsor


ADVERTISEMENT

<http://rd.yahoo.com/SIG=12cv6mfn2/M=274551.4550177.5761904.1261774/D=eg
roup
web/S=1705007183:HM/EXP=1078587240/A=2019528/R=2/SIG=141o6n4a7/*http:/ad
.dou
bleclick.net/jump/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5;sz=300x250;
code
=18634;dcopt=rcl;ord=1078500840330502?>

Click Here
<http://ad.doubleclick.net/ad/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5
;sz=
300x250;code=18634;dcopt=rcl;ord=1078500840330502?> Click Here


<http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egrou
pweb
/S=:HM/A=2019528/rand=769316077>

_____

Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
<http://docs.yahoo.com/info/terms/> .

Tracking #: 358925494EDDEE4C84899F2AB7D78F4A1B90B1C6


[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links




_____

Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
<http://docs.yahoo.com/info/terms/> Service.



[Non-text portions of this message have been removed]
--- ## Post #248 by @system
Hopefully, I will be upgrading from 5.0 to 6.something in the next 12 weeks.
Is there any compelling reason to go to 6.1 as apposed to 6.0.? If 6.1 is
just minor tweaks I'm inclined to go to 6.0 and hold for a while.

Shirley

_____

From: Aaron Hoyt [mailto:hoyt@...]
Sent: Friday, March 05, 2004 12:32 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder

As a quick shortcut...

If you are on 6.0 or above and you have customize privileges. You can
find a "browse list" (looks like spreadsheet) and right click. Choose
customize and it will display all the fields available for that list in
the format "table.field".

Hope this helps. It's cut down the search for me a couple of times.

Aaron Hoyt

Hittite Microwave Corporation



-----Original Message-----
From: Shirley Graver [mailto:shirleyg@...]
Sent: Friday, March 05, 2004 11:04 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder



The Data Dictionary in System Management (bottom of the main menu) Will
guide you through the tables and fields.

Shirley

_____

From: Ron LaPean [mailto:rlapean@...]
Sent: Friday, March 05, 2004 10:34 AM
To: 'Vantage (E-mail)
Subject: [Vantage] Report Builder


Being new....can anyone tell me a easy way to find which table a field
is
located in? Example: I have purchased parts and I loaded the Vendor,
the
Min Order Qty,
then the inv screen for more. I can get all the information based
on the Part Table...any suggestions or ideas.

Ron
"Paying the price" means choosing to lead and follow from conviction,
rather
than reacting to circumstance.
It means taking the time to mature, placing a higher value on character
than on the short-term benefits of reaching a capacity goal.
- The Ascent of a Leader



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
<http://groups.yahoo.com/group/vantage/files/>
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links





Yahoo! Groups Sponsor


ADVERTISEMENT

<http://rd.yahoo.com/SIG=12cv6mfn2/M=274551.4550177.5761904.1261774/D=eg
roup
web/S=1705007183:HM/EXP=1078587240/A=2019528/R=2/SIG=141o6n4a7/*http:/ad
.dou
bleclick.net/jump/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5;sz=300x250;
code
=18634;dcopt=rcl;ord=1078500840330502?>

Click Here
<http://ad.doubleclick.net/ad/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5
;sz=
300x250;code=18634;dcopt=rcl;ord=1078500840330502?> Click Here


<http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egrou
pweb
/S=:HM/A=2019528/rand=769316077>

_____

Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
<http://docs.yahoo.com/info/terms/> .

Tracking #: 358925494EDDEE4C84899F2AB7D78F4A1B90B1C6


[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links




_____

Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
<http://docs.yahoo.com/info/terms/> Service.



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links





Yahoo! Groups Sponsor


ADVERTISEMENT

<http://rd.yahoo.com/SIG=12ccle4uc/M=274551.4550177.5761904.1261774/D=egroup
web/S=1705007183:HM/EXP=1078594481/A=2019528/R=2/SIG=141ua4qs0/*http:/ad.dou
bleclick.net/jump/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5;sz=300x250;code
=18634;dcopt=rcl;ord=1078508081938834?>

Click Here
<http://ad.doubleclick.net/ad/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5;sz=
300x250;code=18634;dcopt=rcl;ord=1078508081938834?> Click Here


<http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egroupweb
/S=:HM/A=2019528/rand=710650933>

_____

Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .


[Non-text portions of this message have been removed]
--- ## Post #249 by @system
I PARTICIPATED IN THE WEB SHOWING OF 6.1.500 AND IT HAS PRICING
ABILITIES, AND OTHER FEATURES.
I WOULD DOWNLOAD THE CHANGES....OR MAYBE YOUR NOT ON EPICOR MAINT?

-----Original Message-----
From: Shirley Graver [mailto:shirleyg@...]
Sent: Friday, March 05, 2004 11:46 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Vantage 6.0 Vs 6.1


Hopefully, I will be upgrading from 5.0 to 6.something in the next 12 weeks.
Is there any compelling reason to go to 6.1 as apposed to 6.0.? If 6.1 is
just minor tweaks I'm inclined to go to 6.0 and hold for a while.

Shirley

_____

From: Aaron Hoyt [mailto:hoyt@...]
Sent: Friday, March 05, 2004 12:32 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder

As a quick shortcut...

If you are on 6.0 or above and you have customize privileges. You can
find a "browse list" (looks like spreadsheet) and right click. Choose
customize and it will display all the fields available for that list in
the format "table.field".

Hope this helps. It's cut down the search for me a couple of times.

Aaron Hoyt

Hittite Microwave Corporation



-----Original Message-----
From: Shirley Graver [mailto:shirleyg@...]
Sent: Friday, March 05, 2004 11:04 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder



The Data Dictionary in System Management (bottom of the main menu) Will
guide you through the tables and fields.

Shirley

_____

From: Ron LaPean [mailto:rlapean@...]
Sent: Friday, March 05, 2004 10:34 AM
To: 'Vantage (E-mail)
Subject: [Vantage] Report Builder


Being new....can anyone tell me a easy way to find which table a field
is
located in? Example: I have purchased parts and I loaded the Vendor,
the
Min Order Qty,
then the inv screen for more. I can get all the information based
on the Part Table...any suggestions or ideas.

Ron
"Paying the price" means choosing to lead and follow from conviction,
rather
than reacting to circumstance.
It means taking the time to mature, placing a higher value on character
than on the short-term benefits of reaching a capacity goal.
- The Ascent of a Leader



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/
<http://groups.yahoo.com/group/vantage/files/> >
< http://groups.yahoo.com/group/vantage/files/
<http://groups.yahoo.com/group/vantage/files/> >
< http://groups.yahoo.com/group/vantage/files/
<http://groups.yahoo.com/group/vantage/files/> >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>





Yahoo! Groups Sponsor


ADVERTISEMENT

< http://rd.yahoo.com/SIG=12cv6mfn2/M=274551.4550177.5761904.1261774/D=eg
<http://rd.yahoo.com/SIG=12cv6mfn2/M=274551.4550177.5761904.1261774/D=eg>
roup
web/S=1705007183:HM/EXP=1078587240/A=2019528/R=2/SIG=141o6n4a7/*http:/ad
.dou
bleclick.net/jump/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5;sz=300x250;
code
=18634;dcopt=rcl;ord=1078500840330502?>

Click Here
< http://ad.doubleclick.net/ad/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5
<http://ad.doubleclick.net/ad/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5>
;sz=
300x250;code=18634;dcopt=rcl;ord=1078500840330502?> Click Here


< http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egrou
<http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egrou>
pweb
/S=:HM/A=2019528/rand=769316077>

_____

Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
<http://groups.yahoo.com/group/vantage/>

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> > .

Tracking #: 358925494EDDEE4C84899F2AB7D78F4A1B90B1C6


[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/
<http://groups.yahoo.com/group/vantage/files/> >
< http://groups.yahoo.com/group/vantage/files/
<http://groups.yahoo.com/group/vantage/files/> >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>




_____

Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
<http://groups.yahoo.com/group/vantage/>


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> >
Service.



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/
<http://groups.yahoo.com/group/vantage/files/> >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>





Yahoo! Groups Sponsor


ADVERTISEMENT

<
http://rd.yahoo.com/SIG=12ccle4uc/M=274551.4550177.5761904.1261774/D=egroup
<http://rd.yahoo.com/SIG=12ccle4uc/M=274551.4550177.5761904.1261774/D=egroup
>
web/S=1705007183:HM/EXP=1078594481/A=2019528/R=2/SIG=141ua4qs0/*http:/ad.dou
bleclick.net/jump/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5;sz=300x250;code
=18634;dcopt=rcl;ord=1078508081938834?>

Click Here
<
http://ad.doubleclick.net/ad/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5;sz=
<http://ad.doubleclick.net/ad/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5;sz=
>
300x250;code=18634;dcopt=rcl;ord=1078508081938834?> Click Here


<
http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egroupweb
<http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egroupweb
>
/S=:HM/A=2019528/rand=710650933>

_____

Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
<http://groups.yahoo.com/group/vantage/>

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> > .


[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>



Yahoo! Groups Sponsor

ADVERTISEMENT


Click HereClick Here

<http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egroupweb
/S=:HM/A=2019528/rand=524006522>


_____

Yahoo! Groups Links


* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
<http://groups.yahoo.com/group/vantage/>


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #250 by @system
Shirley,



At this point, I would have to ask...If you are going to do the upgrade
anyway, is there a compelling reason not to go directly to 6.1?

My understanding is that the conversion to 6.1 is really quick, and all
it does is improve over 6.0.

Personal opinion...6.1 media is on the way, and we will make that jump
shortly after it arrives.



Aaron Hoyt

Hittite Microwave Corporation



-----Original Message-----
From: Shirley Graver [mailto:shirleyg@...]
Sent: Friday, March 05, 2004 12:46 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Vantage 6.0 Vs 6.1



Hopefully, I will be upgrading from 5.0 to 6.something in the next 12
weeks.
Is there any compelling reason to go to 6.1 as apposed to 6.0.? If 6.1
is
just minor tweaks I'm inclined to go to 6.0 and hold for a while.

Shirley

_____

From: Aaron Hoyt [mailto:hoyt@...]
Sent: Friday, March 05, 2004 12:32 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder

As a quick shortcut...

If you are on 6.0 or above and you have customize privileges. You can
find a "browse list" (looks like spreadsheet) and right click. Choose
customize and it will display all the fields available for that list in
the format "table.field".

Hope this helps. It's cut down the search for me a couple of times.

Aaron Hoyt

Hittite Microwave Corporation



-----Original Message-----
From: Shirley Graver [mailto:shirleyg@...]
Sent: Friday, March 05, 2004 11:04 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder



The Data Dictionary in System Management (bottom of the main menu) Will
guide you through the tables and fields.

Shirley

_____

From: Ron LaPean [mailto:rlapean@...]
Sent: Friday, March 05, 2004 10:34 AM
To: 'Vantage (E-mail)
Subject: [Vantage] Report Builder


Being new....can anyone tell me a easy way to find which table a field
is
located in? Example: I have purchased parts and I loaded the Vendor,
the
Min Order Qty,
then the inv screen for more. I can get all the information based
on the Part Table...any suggestions or ideas.

Ron
"Paying the price" means choosing to lead and follow from conviction,
rather
than reacting to circumstance.
It means taking the time to mature, placing a higher value on character
than on the short-term benefits of reaching a capacity goal.
- The Ascent of a Leader



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
<http://groups.yahoo.com/group/vantage/files/>
<http://groups.yahoo.com/group/vantage/files/>
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links





Yahoo! Groups Sponsor


ADVERTISEMENT

<http://rd.yahoo.com/SIG=12cv6mfn2/M=274551.4550177.5761904.1261774/D=eg
roup
web/S=1705007183:HM/EXP=1078587240/A=2019528/R=2/SIG=141o6n4a7/*http:/ad
.dou
bleclick.net/jump/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5;sz=300x250;
code
=18634;dcopt=rcl;ord=1078500840330502?>

Click Here
<http://ad.doubleclick.net/ad/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5
;sz=
300x250;code=18634;dcopt=rcl;ord=1078500840330502?> Click Here


<http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egrou
pweb
/S=:HM/A=2019528/rand=769316077>

_____

Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
<http://docs.yahoo.com/info/terms/> .

Tracking #: 358925494EDDEE4C84899F2AB7D78F4A1B90B1C6


[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
<http://groups.yahoo.com/group/vantage/files/>
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links




_____

Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
<http://docs.yahoo.com/info/terms/> Service.



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links





Yahoo! Groups Sponsor


ADVERTISEMENT

<http://rd.yahoo.com/SIG=12ccle4uc/M=274551.4550177.5761904.1261774/D=eg
roup
web/S=1705007183:HM/EXP=1078594481/A=2019528/R=2/SIG=141ua4qs0/*http:/ad
.dou
bleclick.net/jump/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5;sz=300x250;
code
=18634;dcopt=rcl;ord=1078508081938834?>

Click Here
<http://ad.doubleclick.net/ad/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5
;sz=
300x250;code=18634;dcopt=rcl;ord=1078508081938834?> Click Here


<http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egrou
pweb
/S=:HM/A=2019528/rand=710650933>

_____

Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
<http://docs.yahoo.com/info/terms/> .


[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links






Yahoo! Groups Sponsor



ADVERTISEMENT

<http://rd.yahoo.com/SIG=12ca1gf9h/M=274551.4550177.5761904.1261774/D=eg
roupweb/S=1705007183:HM/EXP=1078595436/A=2019528/R=2/SIG=141tirqkn/*http
:/ad.doubleclick.net/jump/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5;sz=
300x250;code=18634;dcopt=rcl;ord=1078509036519228?>

Click Here
<http://ad.doubleclick.net/ad/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5
;sz=300x250;code=18634;dcopt=rcl;ord=1078509036519228?> Click Here



<http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egrou
pweb/S=:HM/A=2019528/rand=524006522>



_____

Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
<http://docs.yahoo.com/info/terms/> Service.



[Non-text portions of this message have been removed]
--- ## Post #251 by @system
WE HAVE 6.0 .215 NOW. AS OF THE 17TH OF MARCH ...WE WILL HAVE 6.1.5
(PLUS THE PATCH)
I'M TOLD WE WILL HAVE TO INSTALL 6.1.404 AND THEN 6.1.5.
ALSO..SERVICE PACK 7.0 FOR PROGRESS.
AS LONG AS WE ARE UPGRADING---I'M GOING TO GO TO THE LAST PATCH.
RON

-----Original Message-----
From: Shirley Graver [mailto:shirleyg@...]
Sent: Friday, March 05, 2004 11:46 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Vantage 6.0 Vs 6.1


Hopefully, I will be upgrading from 5.0 to 6.something in the next 12 weeks.
Is there any compelling reason to go to 6.1 as apposed to 6.0.? If 6.1 is
just minor tweaks I'm inclined to go to 6.0 and hold for a while.

Shirley

_____

From: Aaron Hoyt [mailto:hoyt@...]
Sent: Friday, March 05, 2004 12:32 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder

As a quick shortcut...

If you are on 6.0 or above and you have customize privileges. You can
find a "browse list" (looks like spreadsheet) and right click. Choose
customize and it will display all the fields available for that list in
the format "table.field".

Hope this helps. It's cut down the search for me a couple of times.

Aaron Hoyt

Hittite Microwave Corporation



-----Original Message-----
From: Shirley Graver [mailto:shirleyg@...]
Sent: Friday, March 05, 2004 11:04 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder



The Data Dictionary in System Management (bottom of the main menu) Will
guide you through the tables and fields.

Shirley

_____

From: Ron LaPean [mailto:rlapean@...]
Sent: Friday, March 05, 2004 10:34 AM
To: 'Vantage (E-mail)
Subject: [Vantage] Report Builder


Being new....can anyone tell me a easy way to find which table a field
is
located in? Example: I have purchased parts and I loaded the Vendor,
the
Min Order Qty,
then the inv screen for more. I can get all the information based
on the Part Table...any suggestions or ideas.

Ron
"Paying the price" means choosing to lead and follow from conviction,
rather
than reacting to circumstance.
It means taking the time to mature, placing a higher value on character
than on the short-term benefits of reaching a capacity goal.
- The Ascent of a Leader



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/
<http://groups.yahoo.com/group/vantage/files/> >
< http://groups.yahoo.com/group/vantage/files/
<http://groups.yahoo.com/group/vantage/files/> >
< http://groups.yahoo.com/group/vantage/files/
<http://groups.yahoo.com/group/vantage/files/> >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>





Yahoo! Groups Sponsor


ADVERTISEMENT

< http://rd.yahoo.com/SIG=12cv6mfn2/M=274551.4550177.5761904.1261774/D=eg
<http://rd.yahoo.com/SIG=12cv6mfn2/M=274551.4550177.5761904.1261774/D=eg>
roup
web/S=1705007183:HM/EXP=1078587240/A=2019528/R=2/SIG=141o6n4a7/*http:/ad
.dou
bleclick.net/jump/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5;sz=300x250;
code
=18634;dcopt=rcl;ord=1078500840330502?>

Click Here
< http://ad.doubleclick.net/ad/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5
<http://ad.doubleclick.net/ad/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5>
;sz=
300x250;code=18634;dcopt=rcl;ord=1078500840330502?> Click Here


< http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egrou
<http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egrou>
pweb
/S=:HM/A=2019528/rand=769316077>

_____

Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
<http://groups.yahoo.com/group/vantage/>

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> > .

Tracking #: 358925494EDDEE4C84899F2AB7D78F4A1B90B1C6


[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/
<http://groups.yahoo.com/group/vantage/files/> >
< http://groups.yahoo.com/group/vantage/files/
<http://groups.yahoo.com/group/vantage/files/> >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>




_____

Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
<http://groups.yahoo.com/group/vantage/>


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> >
Service.



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/
<http://groups.yahoo.com/group/vantage/files/> >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>





Yahoo! Groups Sponsor


ADVERTISEMENT

<
http://rd.yahoo.com/SIG=12ccle4uc/M=274551.4550177.5761904.1261774/D=egroup
<http://rd.yahoo.com/SIG=12ccle4uc/M=274551.4550177.5761904.1261774/D=egroup
>
web/S=1705007183:HM/EXP=1078594481/A=2019528/R=2/SIG=141ua4qs0/*http:/ad.dou
bleclick.net/jump/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5;sz=300x250;code
=18634;dcopt=rcl;ord=1078508081938834?>

Click Here
<
http://ad.doubleclick.net/ad/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5;sz=
<http://ad.doubleclick.net/ad/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5;sz=
>
300x250;code=18634;dcopt=rcl;ord=1078508081938834?> Click Here


<
http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egroupweb
<http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egroupweb
>
/S=:HM/A=2019528/rand=710650933>

_____

Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
<http://groups.yahoo.com/group/vantage/>

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> > .


[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>



Yahoo! Groups Sponsor

ADVERTISEMENT


Click HereClick Here

<http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egroupweb
/S=:HM/A=2019528/rand=524006522>


_____

Yahoo! Groups Links


* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
<http://groups.yahoo.com/group/vantage/>


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #252 by @system
Shirley- We had this issue come up when we were preparing to upgrade from V5
and decided to go ahead and upgrade to V6.1. My understanding is that V6.1
is the last upgrade before Sonoma. I don't see us making that jump for a
couple of years, especially since I came away from Perspectives with the
impression there was going to some sort of charge for it from Epicor above
and beyond the annual licensing fees.

Upgrades are inconvenient and we felt that going straight to V6.1 would be
easier than adding a stop at V6.0.

James Martin

-----Original Message-----
From: Aaron Hoyt [mailto:hoyt@...]
Sent: Friday, March 05, 2004 10:58 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Vantage 6.0 Vs 6.1

Shirley,



At this point, I would have to ask...If you are going to do the upgrade
anyway, is there a compelling reason not to go directly to 6.1?

My understanding is that the conversion to 6.1 is really quick, and all
it does is improve over 6.0.

Personal opinion...6.1 media is on the way, and we will make that jump
shortly after it arrives.



Aaron Hoyt

Hittite Microwave Corporation



-----Original Message-----
From: Shirley Graver [mailto:shirleyg@...]
Sent: Friday, March 05, 2004 12:46 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Vantage 6.0 Vs 6.1



Hopefully, I will be upgrading from 5.0 to 6.something in the next 12
weeks.
Is there any compelling reason to go to 6.1 as apposed to 6.0.? If 6.1
is
just minor tweaks I'm inclined to go to 6.0 and hold for a while.

Shirley

_____



This message including all attachments is the sole property of Electritek Inc. The dissemination, distribution, use or copying of this message or attachments is strictly prohibited without the express written consent of Electritek Inc.
--- ## Post #253 by @system
Try this:

"Print" your Data Dictionary report as a text file. Go in with Word or something like it and use Find.

David Kaufman
CNC Metal Products

> -----Original Message-----
> From: Ron LaPean [SMTP:rlapean@...]
> Sent: Friday, March 05, 2004 10:34 AM
> To: 'Vantage (E-mail)
> Subject: [Vantage] Report Builder
>
>
> Being new....can anyone tell me a easy way to find which table a field is
> located in? Example: I have purchased parts and I loaded the Vendor, the
> Min Order Qty,
> then the inv screen for more. I can get all the information based
> on the Part Table...any suggestions or ideas.
>
> Ron
> "Paying the price" means choosing to lead and follow from conviction, rather
> than reacting to circumstance.
> It means taking the time to mature, placing a higher value on character
> than on the short-term benefits of reaching a capacity goal.
> - The Ascent of a Leader
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
--- ## Post #254 by @system
JAMES:
I WAS TOLD WITH THE MAINT AGREEMENT---SONOMA COMES WITHOUT ANY
COST?
NOT SURE---JUST WHAT I WAS TOLD.
RON

-----Original Message-----
From: James Martin Jr. [mailto:jmartin@...]
Sent: Friday, March 05, 2004 12:07 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Vantage 6.0 Vs 6.1


Shirley- We had this issue come up when we were preparing to upgrade from V5
and decided to go ahead and upgrade to V6.1. My understanding is that V6.1
is the last upgrade before Sonoma. I don't see us making that jump for a
couple of years, especially since I came away from Perspectives with the
impression there was going to some sort of charge for it from Epicor above
and beyond the annual licensing fees.

Upgrades are inconvenient and we felt that going straight to V6.1 would be
easier than adding a stop at V6.0.

James Martin

-----Original Message-----
From: Aaron Hoyt [mailto:hoyt@...]
Sent: Friday, March 05, 2004 10:58 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Vantage 6.0 Vs 6.1

Shirley,



At this point, I would have to ask...If you are going to do the upgrade
anyway, is there a compelling reason not to go directly to 6.1?

My understanding is that the conversion to 6.1 is really quick, and all
it does is improve over 6.0.

Personal opinion...6.1 media is on the way, and we will make that jump
shortly after it arrives.



Aaron Hoyt

Hittite Microwave Corporation



-----Original Message-----
From: Shirley Graver [mailto:shirleyg@...]
Sent: Friday, March 05, 2004 12:46 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Vantage 6.0 Vs 6.1



Hopefully, I will be upgrading from 5.0 to 6.something in the next 12
weeks.
Is there any compelling reason to go to 6.1 as apposed to 6.0.? If 6.1
is
just minor tweaks I'm inclined to go to 6.0 and hold for a while.

Shirley

_____



This message including all attachments is the sole property of Electritek
Inc. The dissemination, distribution, use or copying of this message or
attachments is strictly prohibited without the express written consent of
Electritek Inc.



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>



Yahoo! Groups Sponsor

ADVERTISEMENT


Click HereClick Here

<http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egroupweb
/S=:HM/A=2019528/rand=478028271>


_____

Yahoo! Groups Links


* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
<http://groups.yahoo.com/group/vantage/>


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #255 by @system
I may be mistaken. The issue seemed unsettled at the time of Perspectives.

James

-----Original Message-----
From: Ron LaPean [mailto:rlapean@...]
Sent: Friday, March 05, 2004 11:37 AM
To: 'vantage@yahoogroups.com'
Subject: RE: [Vantage] Vantage 6.0 Vs 6.1

JAMES:
I WAS TOLD WITH THE MAINT AGREEMENT---SONOMA COMES WITHOUT ANY
COST?
NOT SURE---JUST WHAT I WAS TOLD.
RON

-----Original Message-----
From: James Martin Jr. [mailto:jmartin@...]
Sent: Friday, March 05, 2004 12:07 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Vantage 6.0 Vs 6.1


Shirley- We had this issue come up when we were preparing to upgrade from V5
and decided to go ahead and upgrade to V6.1. My understanding is that V6.1
is the last upgrade before Sonoma. I don't see us making that jump for a
couple of years, especially since I came away from Perspectives with the
impression there was going to some sort of charge for it from Epicor above
and beyond the annual licensing fees.

Upgrades are inconvenient and we felt that going straight to V6.1 would be
easier than adding a stop at V6.0.

James Martin

-----Original Message-----
From: Aaron Hoyt [mailto:hoyt@...]
Sent: Friday, March 05, 2004 10:58 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Vantage 6.0 Vs 6.1

Shirley,



At this point, I would have to ask...If you are going to do the upgrade
anyway, is there a compelling reason not to go directly to 6.1?

My understanding is that the conversion to 6.1 is really quick, and all
it does is improve over 6.0.

Personal opinion...6.1 media is on the way, and we will make that jump
shortly after it arrives.



Aaron Hoyt

Hittite Microwave Corporation



-----Original Message-----
From: Shirley Graver [mailto:shirleyg@...]
Sent: Friday, March 05, 2004 12:46 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Vantage 6.0 Vs 6.1



Hopefully, I will be upgrading from 5.0 to 6.something in the next 12
weeks.
Is there any compelling reason to go to 6.1 as apposed to 6.0.? If 6.1
is
just minor tweaks I'm inclined to go to 6.0 and hold for a while.

Shirley

_____



This message including all attachments is the sole property of Electritek
Inc. The dissemination, distribution, use or copying of this message or
attachments is strictly prohibited without the express written consent of
Electritek Inc.



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>



Yahoo! Groups Sponsor

ADVERTISEMENT


Click HereClick Here

<http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egroupweb
/S=:HM/A=2019528/rand=478028271>


_____

Yahoo! Groups Links


* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
<http://groups.yahoo.com/group/vantage/>


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links






This message including all attachments is the sole property of Electritek Inc. The dissemination, distribution, use or copying of this message or attachments is strictly prohibited without the express written consent of Electritek Inc.
--- ## Post #256 by @system
Shirley

Go to 6.1.... I have been on 6.0 since last August. I've run into a few
problems with Global Reports and associating the linked screen. Tech
supports answer was "We fixed it in 6.1 (and have no intension of fixing it
in 6.0). I fear that is going to be the company line on a lot of bugs.
That's the reason I leapt from 4.0 to 6.0. They kept telling me we fixed
that a long time ago - Upgrade.


Cliff Drumeller
IT Manager
Mass Precision Sheetmetal
408 954 0200 x 217

-----Original Message-----
From: Shirley Graver [mailto:shirleyg@...]
Sent: Friday, March 05, 2004 9:46 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Vantage 6.0 Vs 6.1


Hopefully, I will be upgrading from 5.0 to 6.something in the next 12 weeks.
Is there any compelling reason to go to 6.1 as apposed to 6.0.? If 6.1 is
just minor tweaks I'm inclined to go to 6.0 and hold for a while.

Shirley

_____

From: Aaron Hoyt [mailto:hoyt@...]
Sent: Friday, March 05, 2004 12:32 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder

As a quick shortcut...

If you are on 6.0 or above and you have customize privileges. You can
find a "browse list" (looks like spreadsheet) and right click. Choose
customize and it will display all the fields available for that list in
the format "table.field".

Hope this helps. It's cut down the search for me a couple of times.

Aaron Hoyt

Hittite Microwave Corporation



-----Original Message-----
From: Shirley Graver [mailto:shirleyg@...]
Sent: Friday, March 05, 2004 11:04 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder



The Data Dictionary in System Management (bottom of the main menu) Will
guide you through the tables and fields.

Shirley

_____

From: Ron LaPean [mailto:rlapean@...]
Sent: Friday, March 05, 2004 10:34 AM
To: 'Vantage (E-mail)
Subject: [Vantage] Report Builder


Being new....can anyone tell me a easy way to find which table a field
is
located in? Example: I have purchased parts and I loaded the Vendor,
the
Min Order Qty,
then the inv screen for more. I can get all the information based
on the Part Table...any suggestions or ideas.

Ron
"Paying the price" means choosing to lead and follow from conviction,
rather
than reacting to circumstance.
It means taking the time to mature, placing a higher value on character
than on the short-term benefits of reaching a capacity goal.
- The Ascent of a Leader



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/
<http://groups.yahoo.com/group/vantage/files/> >
< http://groups.yahoo.com/group/vantage/files/
<http://groups.yahoo.com/group/vantage/files/> >
< http://groups.yahoo.com/group/vantage/files/
<http://groups.yahoo.com/group/vantage/files/> >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>





Yahoo! Groups Sponsor


ADVERTISEMENT

< http://rd.yahoo.com/SIG=12cv6mfn2/M=274551.4550177.5761904.1261774/D=eg
<http://rd.yahoo.com/SIG=12cv6mfn2/M=274551.4550177.5761904.1261774/D=eg>
roup
web/S=1705007183:HM/EXP=1078587240/A=2019528/R=2/SIG=141o6n4a7/*http:/ad
.dou
bleclick.net/jump/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5;sz=300x250;
code
=18634;dcopt=rcl;ord=1078500840330502?>

Click Here
< http://ad.doubleclick.net/ad/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5
<http://ad.doubleclick.net/ad/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5>
;sz=
300x250;code=18634;dcopt=rcl;ord=1078500840330502?> Click Here


< http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egrou
<http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egrou>
pweb
/S=:HM/A=2019528/rand=769316077>

_____

Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
<http://groups.yahoo.com/group/vantage/>

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> > .

Tracking #: 358925494EDDEE4C84899F2AB7D78F4A1B90B1C6


[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/
<http://groups.yahoo.com/group/vantage/files/> >
< http://groups.yahoo.com/group/vantage/files/
<http://groups.yahoo.com/group/vantage/files/> >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>




_____

Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
<http://groups.yahoo.com/group/vantage/>


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> >
Service.



[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
< http://groups.yahoo.com/group/vantage/files/
<http://groups.yahoo.com/group/vantage/files/> >
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>





Yahoo! Groups Sponsor


ADVERTISEMENT

<
http://rd.yahoo.com/SIG=12ccle4uc/M=274551.4550177.5761904.1261774/D=egroup
<http://rd.yahoo.com/SIG=12ccle4uc/M=274551.4550177.5761904.1261774/D=egroup
>
web/S=1705007183:HM/EXP=1078594481/A=2019528/R=2/SIG=141ua4qs0/*http:/ad.dou
bleclick.net/jump/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5;sz=300x250;code
=18634;dcopt=rcl;ord=1078508081938834?>

Click Here
<
http://ad.doubleclick.net/ad/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5;sz=
<http://ad.doubleclick.net/ad/N3349.yahoo1/B1282054.27;abr=!ie4;abr=!ie5;sz=
>
300x250;code=18634;dcopt=rcl;ord=1078508081938834?> Click Here


<
http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egroupweb
<http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egroupweb
>
/S=:HM/A=2019528/rand=710650933>

_____

Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
<http://groups.yahoo.com/group/vantage/>

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
< http://docs.yahoo.com/info/terms/ <http://docs.yahoo.com/info/terms/> > .


[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>



Yahoo! Groups Sponsor

ADVERTISEMENT


Click HereClick Here

<http://us.adserver.yahoo.com/l?M=274551.4550177.5761904.1261774/D=egroupweb
/S=:HM/A=2019528/rand=524006522>


_____

Yahoo! Groups Links


* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/
<http://groups.yahoo.com/group/vantage/>


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #257 by @system
I am attempting to alter some old reports to prepare a time and
material billing by the end of the day. I have a report to pull all
STK-MTL transactions, but all of the values are negative and I want
them to be positive for issues to the job and negative for returns to
inventory. I am not proficient at rb and any help would be
appreciated. I also want to put a total for the material to balance
the report to the PDR. You may contact me off list. Thanks for any
help.


Gary Ditto
Westinghouse-EPD
gary.ditto@...
505-234-5654
--- ## Post #258 by @system
I hope somone out there can help me with a Report Builder problem I
am having. I am trying to create a report to show the
production/inventory people a day in advance the materials that will
be required to run production the following day. This report would
allow them to stage the required materials a day ahead of time
instead of waiting util the day of only to find out that the material
is not out there (can you tell we are having a problem with our
inventory???). I am using the JobOpr table and everytime I try to
join an additional table (i.e. the JobMtl table) I start getting
multiple lien items for the same job. I've tried changing the join
types and that doesn't change a thing.

The related tables area in the data dictionary view tells me to join
these two field together by: company, job num, assy seq and opr
seq. However OprSeq is not available in the JobMtl table.

I am getting very frustrated with this program as this happens to me
all the time. Any help would be greatly appreciated!!

Joan Farver
Vantage Plastics
--- ## Post #259 by @system
The reason it is doing this is because sometimes there is more than one
material on each JobOper.



The loop will have to be structured differently.



Sherri Hill

Sr. Programmer Analyst, GBS

330-494-5330, Ext. #2405

_____

From: joanfarver [mailto:joan.farver@...]
Sent: Wednesday, June 23, 2004 11:01 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder



I hope somone out there can help me with a Report Builder problem I
am having. I am trying to create a report to show the
production/inventory people a day in advance the materials that will
be required to run production the following day. This report would
allow them to stage the required materials a day ahead of time
instead of waiting util the day of only to find out that the material
is not out there (can you tell we are having a problem with our
inventory???). I am using the JobOpr table and everytime I try to
join an additional table (i.e. the JobMtl table) I start getting
multiple lien items for the same job. I've tried changing the join
types and that doesn't change a thing.

The related tables area in the data dictionary view tells me to join
these two field together by: company, job num, assy seq and opr
seq. However OprSeq is not available in the JobMtl table.

I am getting very frustrated with this program as this happens to me
all the time. Any help would be greatly appreciated!!

Joan Farver
Vantage Plastics



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links





Yahoo! Groups Sponsor

ADVERTISEMENT
click here
<http://us.ard.yahoo.com/SIG=129gmdhk0/M=298184.5022502.6152625.3001176/
D=groups/S=1705007183:HM/EXP=1088089267/A=2164339/R=0/SIG=11e2d64in/*htt
p:/www.netflix.com/Default?mqso=60183348>


<http://us.adserver.yahoo.com/l?M=298184.5022502.6152625.3001176/D=group
s/S=:HM/A=2164339/rand=729688792>



_____

Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .



[Non-text portions of this message have been removed]
--- ## Post #260 by @system
Joan,

Try joining JobOpr.OprSeq to JobMtl.RelatedOperation.

HTH,

Brian Stenglein
Clow Stamping Co.

--- In vantage@yahoogroups.com, "joanfarver" <joan.farver@v...> wrote:
> I hope somone out there can help me with a Report Builder problem I
> am having. I am trying to create a report to show the
> production/inventory people a day in advance the materials that
will
> be required to run production the following day. This report would
> allow them to stage the required materials a day ahead of time
> instead of waiting util the day of only to find out that the
material
> is not out there (can you tell we are having a problem with our
> inventory???). I am using the JobOpr table and everytime I try to
> join an additional table (i.e. the JobMtl table) I start getting
> multiple lien items for the same job. I've tried changing the join
> types and that doesn't change a thing.
>
> The related tables area in the data dictionary view tells me to
join
> these two field together by: company, job num, assy seq and opr
> seq. However OprSeq is not available in the JobMtl table.
>
> I am getting very frustrated with this program as this happens to
me
> all the time. Any help would be greatly appreciated!!
>
> Joan Farver
> Vantage Plastics
--- ## Post #261 by @system
Join the JobMtl.RelatedOperation to the JobOper.OprSeq


Patrick Winter


-----Original Message-----
From: joanfarver [mailto:joan.farver@...]
Sent: Wednesday, June 23, 2004 10:01 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder

I hope somone out there can help me with a Report Builder problem I am
having. I am trying to create a report to show the production/inventory
people a day in advance the materials that will be required to run
production the following day. This report would allow them to stage the
required materials a day ahead of time instead of waiting util the day of
only to find out that the material is not out there (can you tell we are
having a problem with our inventory???). I am using the JobOpr table and
everytime I try to join an additional table (i.e. the JobMtl table) I start
getting multiple lien items for the same job. I've tried changing the join
types and that doesn't change a thing.

The related tables area in the data dictionary view tells me to join these
two field together by: company, job num, assy seq and opr seq. However
OprSeq is not available in the JobMtl table.

I am getting very frustrated with this program as this happens to me all the
time. Any help would be greatly appreciated!!

Joan Farver
Vantage Plastics



------------------------ Yahoo! Groups Sponsor --------------------~-->
Yahoo! Domains - Claim yours for only $14.70
http://us.click.yahoo.com/Z1wmxD/DREIAA/yQLSAA/PhFolB/TM
--------------------------------------------------------------------~->

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
--- ## Post #262 by @system
Today's dumb question......

I have a RB report which I can print quite happily thru Report Builder.
When I try to run the same report to the same printer via a Vantage Menu
option, I get the error "Specified printer is not installed or specified
port is not available"

I know I've cured this before but cannot remember how.
Any ideas?

Regards,
Richard

Richard Bailey
Dudley Industries
W:+44(0)1253 738311
M:+44(0)7836 550360
Mailto: rbailey@...
--- ## Post #263 by @system
Are you print previewing when it does not work? If so try running the report from Vantage without previewing. It should pop-up a list of printers to select from. Try the printer from there and see if it prints.
-Todd C.

-----Original Message-----
From: Richard Bailey [mailto:rbailey@...]
Sent: Wednesday, January 05, 2005 10:48 AM
To: UserGroup
Subject: [Vantage] Report Builder


Today's dumb question......

I have a RB report which I can print quite happily thru Report Builder.
When I try to run the same report to the same printer via a Vantage Menu
option, I get the error "Specified printer is not installed or specified
port is not available"

I know I've cured this before but cannot remember how.
Any ideas?

Regards,
Richard

Richard Bailey
Dudley Industries
W:+44(0)1253 738311
M:+44(0)7836 550360
Mailto: rbailey@...



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links



_____

Yahoo! Groups Links


* To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]
--- ## Post #264 by @system
I am using Report Builder in Vantage 6.1. I want to be able to
export or view my report into Excel and can not figure out how to do
that. Is it possible? I tried to recreate the same thing in Business
Activity Query but the same 3 tables are not able to be linked
together. The tables I am trying to link are JobMtl, VentPart and
Vendor

Thanks
Dan Ernst
Computer Services
Correct Craft, Inc.
(407) 855-4141
http://www.correctcraft.com
--- ## Post #265 by @system
I figured it out. I noticed there was an export option.
Thanks
Dan Ernst
Computer Services
Correct Craft, Inc.
(407) 855-4141
http://www.correctcraft.com

--- In vantage@yahoogroups.com, "Dan Ernst" <dernst@c...> wrote:
>
> I am using Report Builder in Vantage 6.1. I want to be able to
> export or view my report into Excel and can not figure out how to
do
> that. Is it possible? I tried to recreate the same thing in
Business
> Activity Query but the same 3 tables are not able to be linked
> together. The tables I am trying to link are JobMtl, VentPart and
> Vendor
>
> Thanks
> Dan Ernst
> Computer Services
> Correct Craft, Inc.
> (407) 855-4141
> http://www.correctcraft.com
--- ## Post #266 by @system
Dan,

You can link them in BAQ by typing in the links.
Actually you can do many things outside the Wizard by just typing in the
correct syntax.
I have been able to do: left outer joins, look for today's transactions for
something, sort descending or ascending.


>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Code Examples for BAQ
Query for today:
and LaborDtl.PayRollDate = Today nolock,

Query for String:
And Substring(LaborDtl.LaborNote,1,2) = "02" no-lock,

Query for Left Outer Join:
for each LaborDtl no-lock where LaborDtl.Company = CUR-COMP and
LaborDtl.PayrollDate = Today,
first EmpBasic outer-join no-lock where EmpBasic.Company = LaborDtl.Company
and EmpBasic.EmpId = LaborDtl.EmployeeNum,

Query for sort descending
by LaborDtl.Payrolldate descending

Patrick Winter
sSc Specialty Screw Corporation
Vantage 6.10.514, Progress 9.1D08, Windows 2003 Server, Crystal 8.5.3.975

-----Original Message-----
From: Dan Ernst [mailto:dernst@...]
Sent: Tuesday, February 22, 2005 8:27 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder



I am using Report Builder in Vantage 6.1. I want to be able to export or
view my report into Excel and can not figure out how to do that. Is it
possible? I tried to recreate the same thing in Business Activity Query but
the same 3 tables are not able to be linked together. The tables I am trying
to link are JobMtl, VentPart and Vendor

Thanks
Dan Ernst
Computer Services
Correct Craft, Inc.
(407) 855-4141
http://www.correctcraft.com
--- ## Post #267 by @system
Dan,
If you want all of your fields to line up nicely in Excel you might need to
use the calculations of FILL and LENGTH. If you need any more information
let me know.
Nancy

-----Original Message-----
From: Dan Ernst [mailto:dernst@...]
Sent: Tuesday, February 22, 2005 9:38 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: Report Builder




I figured it out. I noticed there was an export option.
Thanks
Dan Ernst
Computer Services
Correct Craft, Inc.
(407) 855-4141
http://www.correctcraft.com

--- In vantage@yahoogroups.com, "Dan Ernst" <dernst@c...> wrote:
>
> I am using Report Builder in Vantage 6.1. I want to be able to
> export or view my report into Excel and can not figure out how to
do
> that. Is it possible? I tried to recreate the same thing in
Business
> Activity Query but the same 3 tables are not able to be linked
> together. The tables I am trying to link are JobMtl, VentPart and
> Vendor
>
> Thanks
> Dan Ernst
> Computer Services
> Correct Craft, Inc.
> (407) 855-4141
> http://www.correctcraft.com





Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
--- ## Post #268 by @system
I am new to this user group, but am hopeful that someone can offer
some help. I am interested in writing a report builder that will
allow me to extract routing information showing a specific work center
as the "gateway" operation and then any subsequent operations that
follow. For instance, I may want the report to pull records for any
parts that have a drilling operation and then show all of the
following operations, regardless of at which sequence the drilling
operation occurs. I have tried to develop this report until I am blue
in the face, without any results. Does anyone out there have any
experience in developing a similar report. Any help would be greatly
appreciated. Thanks.
--- ## Post #269 by @system
I'd suggest to use Crystal, not Report Builder, if you plan on going to 8
where RB isn't supported.

----- Original Message -----
From: "wireman_jeff" <wireman_jeff@...>
To: <vantage@yahoogroups.com>
Sent: Thursday, June 02, 2005 12:34 PM
Subject: [Vantage] Report Builder


>I am new to this user group, but am hopeful that someone can offer
> some help. I am interested in writing a report builder that will
> allow me to extract routing information showing a specific work center
> as the "gateway" operation and then any subsequent operations that
> follow. For instance, I may want the report to pull records for any
> parts that have a drilling operation and then show all of the
> following operations, regardless of at which sequence the drilling
> operation occurs. I have tried to develop this report until I am blue
> in the face, without any results. Does anyone out there have any
> experience in developing a similar report. Any help would be greatly
> appreciated. Thanks.
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
>
--- ## Post #270 by @system
I agree also. I think crystal has a better interface to boot.

-----Original Message-----
From: Chris Robisch [mailto:blue.wine@...]
Sent: Thursday, June 02, 2005 3:43 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Report Builder


I'd suggest to use Crystal, not Report Builder, if you plan on going to 8
where RB isn't supported.

----- Original Message -----
From: "wireman_jeff" <wireman_jeff@...>
To: <vantage@yahoogroups.com>
Sent: Thursday, June 02, 2005 12:34 PM
Subject: [Vantage] Report Builder


>I am new to this user group, but am hopeful that someone can offer
> some help. I am interested in writing a report builder that will
> allow me to extract routing information showing a specific work center
> as the "gateway" operation and then any subsequent operations that
> follow. For instance, I may want the report to pull records for any
> parts that have a drilling operation and then show all of the
> following operations, regardless of at which sequence the drilling
> operation occurs. I have tried to develop this report until I am blue
> in the face, without any results. Does anyone out there have any
> experience in developing a similar report. Any help would be greatly
> appreciated. Thanks.
>
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
> Yahoo! Groups Links
>
>
>
>
>
>



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links








<www.LCDarms.com> -- Ergonomic mounting solutions for monitors and keyboards

This e-mail is from Innovative Office Products, Inc. but expresses the views of the sender and not necessarily the views of the company. The email and any files transmitted with it are confidential to the intended recipient at the e-mail address to which it has been addressed. It may not be disclosed or used by any other than that addressee, nor may it be copied in any way. If received in error, please delete and notify the sender via e-mail or sales@... quoting the name of the sender. Messages sent via this medium may be subject to delays, non-delivery and unauthorized alteration. This e-mail has been prepared using information believed by the author to be reliable and accurate. Unless expressly stated otherwise, this e-mail does not form part of a legally binding contract or agreement between recipient and Innovative Office Products, Inc.

Warning: Although Innovative Office Products, Inc. has taken reasonable precautions to ensure no viruses are present in this email, we cannot accept responsibility for any loss or damage arising from the use of this email or attachments. It is, therefore, your responsibility to scan attachments (if any).
--- ## Post #271 by @system
Jeff,

This is one way to get your results that I have used in several reports.
Also works well in reverse looking backward thru operations to see what's
ready to work on also.

Steps:

Master Table = JobOper
Insert JobOper.WcCode, JobOper.JobNum, JobOper.OprSeq on Record Row
Filter for you Drill Work Center, and of course Operations complete = No.
Preview report for sanity check.

Join to JobOper change Alias name to JobOper2
Use Company and Job Number only.
Note: You are reading drill operations in JobOper and connecting to all
operations for this job using JobOper2.
Add Fields from JobOper2, JobOper2.OprSeq, JobOper.WcCode
Preview and for each drill operation it repeats for each operation for the
job.

Filter for JobOper2.OprSeq > JobOper.OprSeq
Preview and you get just the operations greater than Drill.

You can now Sort And Group as desired.
This works for report builder and Crystal, Crystal 10 allows you to put the
last filter in the table join.

Also my table name and field name syntax my be off just a little, use the
data dictionary if necessary.

Patrick Winter
sSc Specialty Screw Corporation
Vantage 6.10.514, Progress 9.1D08, Windows 2003 Server, Crystal 8.5.3.975



-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
wireman_jeff
Sent: Thursday, June 02, 2005 2:34 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder

I am new to this user group, but am hopeful that someone can offer some
help. I am interested in writing a report builder that will allow me to
extract routing information showing a specific work center as the "gateway"
operation and then any subsequent operations that follow. For instance, I
may want the report to pull records for any parts that have a drilling
operation and then show all of the following operations, regardless of at
which sequence the drilling operation occurs. I have tried to develop this
report until I am blue in the face, without any results. Does anyone out
there have any experience in developing a similar report. Any help would be
greatly appreciated. Thanks.





Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
--- ## Post #272 by @system
Patrick,

Sage advice. I will give this a try. Thank you very much for the suggestion. All I got from other respondants was to switch to Crystal, which we are not going to do just yet. Thanks again!

Scott Jeffers

pjw@... wrote:
Jeff,

This is one way to get your results that I have used in several reports.
Also works well in reverse looking backward thru operations to see what's
ready to work on also.

Steps:

Master Table = JobOper
Insert JobOper.WcCode, JobOper.JobNum, JobOper.OprSeq on Record Row
Filter for you Drill Work Center, and of course Operations complete = No.
Preview report for sanity check.

Join to JobOper change Alias name to JobOper2
Use Company and Job Number only.
Note: You are reading drill operations in JobOper and connecting to all
operations for this job using JobOper2.
Add Fields from JobOper2, JobOper2.OprSeq, JobOper.WcCode
Preview and for each drill operation it repeats for each operation for the
job.

Filter for JobOper2.OprSeq > JobOper.OprSeq
Preview and you get just the operations greater than Drill.

You can now Sort And Group as desired.
This works for report builder and Crystal, Crystal 10 allows you to put the
last filter in the table join.

Also my table name and field name syntax my be off just a little, use the
data dictionary if necessary.

Patrick Winter
sSc Specialty Screw Corporation
Vantage 6.10.514, Progress 9.1D08, Windows 2003 Server, Crystal 8.5.3.975



-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
wireman_jeff
Sent: Thursday, June 02, 2005 2:34 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder

I am new to this user group, but am hopeful that someone can offer some
help. I am interested in writing a report builder that will allow me to
extract routing information showing a specific work center as the "gateway"
operation and then any subsequent operations that follow. For instance, I
may want the report to pull records for any parts that have a drilling
operation and then show all of the following operations, regardless of at
which sequence the drilling operation occurs. I have tried to develop this
report until I am blue in the face, without any results. Does anyone out
there have any experience in developing a similar report. Any help would be
greatly appreciated. Thanks.





Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links







Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links



---------------------------------
Yahoo! Groups Links

To visit your group on the web, go to:
http://groups.yahoo.com/group/vantage/

To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

[Non-text portions of this message have been removed]
--- ## Post #273 by @system
WE have experienced a problem when opening a report builder library.
The library has no reports. The files are there, but we receive a
progress 100 error (which says the library file is corrupt, go retrieve
your back up file). Unfortunately, somehow our backup file did not
run. Progress through Epicor does not know if they can fix. We have
52 reports in there that we need ASAP. Also got information that there
is a restriction on either the number or size of reports within a
single library that may cause corruption, but no one seems to know what
the limit parameters are.

If anyone has any information on this, it would be greatly
appreciated. Recreating all these from scratch will be a nightmare.
We were waiting to write in Crystal until 8.0, as we want to rewrite
once in Crystal 10. Thanks.
--- ## Post #274 by @system
I am still searching old messages. I know I have encountered this before. Yes, there is a limit to the size or a PRL or the number of reports inside but this seems to be variable and/or random. Before I learned of it I had a PRL with over 200 reports in it. I quickly split it into several smaller PRL files before I got bit.

A couple things to try.
1. MAKE A COPY of the current PRL and keep it safe through the following steps - if Epicor/Progress can help you might need it.

2. Copy the PRL file (using Windows Explorer) to a new PRL file with a different name. Try opening that in RB. If it works quickly save the reports to a couple new PRLs.

3. If #2 does not work.....open the PRL with Notepad or Wordpad and hack off a chunk from the bottom...save as a new PRL name and try to open
(you will probably lose at least one report)

4. Also try #3 with a hex editor type program where you can better see the start/end of report and "cut" between reports - save as new name

Another thing to consider....are you still able to "run" reports from Vantage and the report link but just not able to open them with the RB editor? In the worst case scenario of a re-write you might be able to at least recall the details of each report better. Sometimes PRLs are corrupted only for the editor and not for executing.

Have you tried the check box on the open library window for "Open Read-Only"? This might allow at least seeing the reports and being able to copy them to a new PRL (or several new PRLs) - create new libraries with a "save as" of some other report in a good PRL then "New Library...".

All of these are really long shots. I will keep searching old messages because I know I have been able to at least recover part of a corrupted PRL at one time or another. There have been a number of messages I have found where even backups, when restored, were also corrupted and people have had to go back prety far to find a good one.

-Todd C.





-----Original Message-----
From: fselliott2 [mailto:fselliott2@...]
Sent: Tuesday, August 23, 2005 11:11 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder


WE have experienced a problem when opening a report builder library.
The library has no reports. The files are there, but we receive a
progress 100 error (which says the library file is corrupt, go retrieve
your back up file). Unfortunately, somehow our backup file did not
run. Progress through Epicor does not know if they can fix. We have
52 reports in there that we need ASAP. Also got information that there
is a restriction on either the number or size of reports within a
single library that may cause corruption, but no one seems to know what
the limit parameters are.

If anyone has any information on this, it would be greatly
appreciated. Recreating all these from scratch will be a nightmare.
We were waiting to write in Crystal until 8.0, as we want to rewrite
once in Crystal 10. Thanks.




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links



_____

YAHOO! GROUPS LINKS



* Visit your group " vantage <http://groups.yahoo.com/group/vantage> " on the web.


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .


_____




[Non-text portions of this message have been removed]
--- ## Post #275 by @system
Thank you so much. We have tried copying the file to a new PRL and
opening with Notepad and hacking off some (but will try #4)

We cannot run the report from the Vantage menu either. We will try
all of your suggestions, as this week is our month end, and of course
we need many of the reports!! Thanks again for your response.



--- In vantage@yahoogroups.com, "Todd Caughey" <caugheyt@h...> wrote:
> I am still searching old messages. I know I have encountered this
before. Yes, there is a limit to the size or a PRL or the number of
reports inside but this seems to be variable and/or random. Before I
learned of it I had a PRL with over 200 reports in it. I quickly
split it into several smaller PRL files before I got bit.
>
> A couple things to try.
> 1. MAKE A COPY of the current PRL and keep it safe through the
following steps - if Epicor/Progress can help you might need it.
>
> 2. Copy the PRL file (using Windows Explorer) to a new PRL file
with a different name. Try opening that in RB. If it works quickly
save the reports to a couple new PRLs.
>
> 3. If #2 does not work.....open the PRL with Notepad or Wordpad
and hack off a chunk from the bottom...save as a new PRL name and try
to open
> (you will probably lose at least one report)
>
> 4. Also try #3 with a hex editor type program where you can better
see the start/end of report and "cut" between reports - save as new
name
>
> Another thing to consider....are you still able to "run" reports
from Vantage and the report link but just not able to open them with
the RB editor? In the worst case scenario of a re-write you might be
able to at least recall the details of each report better. Sometimes
PRLs are corrupted only for the editor and not for executing.
>
> Have you tried the check box on the open library window for "Open
Read-Only"? This might allow at least seeing the reports and being
able to copy them to a new PRL (or several new PRLs) - create new
libraries with a "save as" of some other report in a good PRL
then "New Library...".
>
> All of these are really long shots. I will keep searching old
messages because I know I have been able to at least recover part of
a corrupted PRL at one time or another. There have been a number of
messages I have found where even backups, when restored, were also
corrupted and people have had to go back prety far to find a good one.
>
> -Todd C.
>
>
>
>
>
> -----Original Message-----
> From: fselliott2 [mailto:fselliott2@y...]
> Sent: Tuesday, August 23, 2005 11:11 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Report Builder
>
>
> WE have experienced a problem when opening a report builder
library.
> The library has no reports. The files are there, but we receive a
> progress 100 error (which says the library file is corrupt, go
retrieve
> your back up file). Unfortunately, somehow our backup file did not
> run. Progress through Epicor does not know if they can fix. We
have
> 52 reports in there that we need ASAP. Also got information that
there
> is a restriction on either the number or size of reports within a
> single library that may cause corruption, but no one seems to know
what
> the limit parameters are.
>
> If anyone has any information on this, it would be greatly
> appreciated. Recreating all these from scratch will be a
nightmare.
> We were waiting to write in Crystal until 8.0, as we want to
rewrite
> once in Crystal 10. Thanks.
>
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must have already linked your email address to a yahoo id to enable
access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
>
>
>
> _____
>
> YAHOO! GROUPS LINKS
>
>
>
> * Visit your group " vantage
<http://groups.yahoo.com/group/vantage> " on the web.
>
>
> * To unsubscribe from this group, send an email to:
> vantage-unsubscribe@yahoogroups.com <mailto:vantage-
unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
>
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .
>
>
> _____
>
>
>
>
> [Non-text portions of this message have been removed]
--- ## Post #276 by @system
More long shots to try.......

1. In the mfgsys.ini file (for us in mfgsys61 folder)....find the RBstartup section in under [ReportBuilderSavelist] change the bottom three lined to be
NotFirstTime=0
Library=
Report=

Basically set NotFirstTime to zero and delete any file names. I think this might allow RB to "clean" open some other PRL (if you don't have one download one from the Epicor support site in the downloads area). Open a report and close it. Then attempt to open the "corrupt" PRL. A real long shot but stranger things have worked.

2. Probably won't help but just to see.....
Create the following .p file with the progress editor and try to run it (you can cut /paste this text):
--------------------------------------------
DEFINE VARIABLE rl AS CHARACTER.
DEFINE VARIABLE rc AS INTEGER.
DEFINE VARIABLE rp AS CHARACTER VIEW-AS SELECTION-LIST INNER-LINES 10
INNER-CHARS 32.

FORM "Number of Reports" rc SKIP rp WITH FRAME x NO-LABELS.

RUN aderb/_getname.p ("V:\vantage\reports\corrupt.prl", OUTPUT rl, OUTPUT rc).

rp = ?.
rp:LIST-ITEMS = rl.
DISPLAY rc WITH FRAME x.
UPDATE rp WITH FRAME x.
-----------------------------------------------------
Change the V:\vantage........ file location and name to point to your bad prl
In the Procedure Editor do a Shift-F2 to check the syntax ( I already did and it looks OK so any problem would be the file path)
Then do a plain F2 to run it.
It should list the reports n the PRL file. This report is from the RB User's Guide (like I actually know .p code that well ! )
If it lists the reports in the PRL there might be hope. It may just be the Editor program choking on codepage conversions.

In the same aderb folder there is a routine called _printrb.r that I believe will dump the specs of a report within a library. Can any "real" experts out there confirm this and know the proper parameters? If my hunch is correct you ought to be at least able to see the specs which would be a huge head-start on re-writing. Even allow cut/paste of formula fields. Even if this does not work it might be a clue in the right direction.

-Todd C.







-----Original Message-----
From: fselliott2 [mailto:fselliott2@...]
Sent: Tuesday, August 23, 2005 11:11 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder


WE have experienced a problem when opening a report builder library.
The library has no reports. The files are there, but we receive a
progress 100 error (which says the library file is corrupt, go retrieve
your back up file). Unfortunately, somehow our backup file did not
run. Progress through Epicor does not know if they can fix. We have
52 reports in there that we need ASAP. Also got information that there
is a restriction on either the number or size of reports within a
single library that may cause corruption, but no one seems to know what
the limit parameters are.

If anyone has any information on this, it would be greatly
appreciated. Recreating all these from scratch will be a nightmare.
We were waiting to write in Crystal until 8.0, as we want to rewrite
once in Crystal 10. Thanks.




Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links



_____

YAHOO! GROUPS LINKS



* Visit your group " vantage <http://groups.yahoo.com/group/vantage> " on the web.


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .


_____




[Non-text portions of this message have been removed]
--- ## Post #277 by @system
Hi All,
I have a new business report that is giving an incorrect total. It seems to
omit one particular sales order. The order has 2 lines and is the same part
#. Can anyone help solve this?

Thanks,
Nelson Dufour

Colonial Tool Group Inc.
Nelson L. Dufour Ph. 519-253-2461, x226
I.S. Services Mgr. Ph. 313-965-8680, x226
1691 Walker Rd.
Windsor, Ont. N8W 3P1
e-mail: ndufour@... <mailto:ndufour@...>
web: www.colonialtool.com <http://www.colonialtool.com>
--- ## Post #278 by @system
Without more information it is hard to guess as to a casue. Since this is an omition issue the first hunch would be in the linking somewhere that does not have a left outer join type where missing records are filled in with "unknown". If this is the issue and it is changed but missing values are possible used in an aggregate be sure to "ignore unknown values" in the aggregate setup.

What sort of linking and grouping is being done?

-Todd C.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf Of Nelson Dufour
Sent: Thursday, December 08, 2005 8:44 AM
To: Vantage (E-mail)
Subject: [Vantage] Report Builder


Hi All,
I have a new business report that is giving an incorrect total. It seems to
omit one particular sales order. The order has 2 lines and is the same part
#. Can anyone help solve this?

Thanks,
Nelson Dufour

Colonial Tool Group Inc.
Nelson L. Dufour Ph. 519-253-2461, x226
I.S. Services Mgr. Ph. 313-965-8680, x226
1691 Walker Rd.
Windsor, Ont. N8W 3P1
e-mail: ndufour@... <mailto:ndufour@...>
web: www.colonialtool.com < http://www.colonialtool.com>



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links




SPONSORED LINKS
Manufacturing <http://groups.yahoo.com/gads?t=ms&k=Manufacturing+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=OG5F3819UOUOg63i0bu6kA> software Membership <http://groups.yahoo.com/gads?t=ms&k=Membership+database+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=N5BGdur84p-jyuOomcQdbQ> database software Database <http://groups.yahoo.com/gads?t=ms&k=Database+mortgage+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=8rvcSQnCqJhTCZu-0Si39A> mortgage software
Pda <http://groups.yahoo.com/gads?t=ms&k=Pda+database+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=u3KQrTRPAQfsWIT39aHDkg> database software Database <http://groups.yahoo.com/gads?t=ms&k=Database+management+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=R3CF3ODPY4gwjDZjykQYvw> management software Database <http://groups.yahoo.com/gads?t=ms&k=Database+marketing+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=lmBkRUiBtvHI1u5dkymDcw> marketing software

_____

YAHOO! GROUPS LINKS



* Visit your group " vantage <http://groups.yahoo.com/group/vantage> " on the web.


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .


_____




[Non-text portions of this message have been removed]
--- ## Post #279 by @system
It sounds like its adding from the order number grouping and not the line
level grouping. Check your sorts and groups then see where the total
(aggregate variable) is pointed to add from. (The "Accumulation:" is set
to.)


Patrick Winter

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Nelson Dufour
Sent: Thursday, December 08, 2005 8:44 AM
To: Vantage (E-mail)
Subject: [Vantage] Report Builder

Hi All,
I have a new business report that is giving an incorrect total. It seems to
omit one particular sales order. The order has 2 lines and is the same part
#. Can anyone help solve this?

Thanks,
Nelson Dufour

Colonial Tool Group Inc.
Nelson L. Dufour Ph. 519-253-2461, x226
I.S. Services Mgr. Ph. 313-965-8680, x226
1691 Walker Rd.
Windsor, Ont. N8W 3P1
e-mail: ndufour@... <mailto:ndufour@...>
web: www.colonialtool.com <http://www.colonialtool.com>



------------------------ Yahoo! Groups Sponsor --------------------~--> Get
Bzzzy! (real tools to help you find a job). Welcome to the Sweet Life.
http://us.click.yahoo.com/KIlPFB/vlQLAA/TtwFAA/PhFolB/TM
--------------------------------------------------------------------~->

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
--- ## Post #280 by @system
First I would check your filter to make sure it's not excluded for some
obvious, but easily over looked reason (advance payment, date range, etc.)

RG


Hi All,
I have a new business report that is giving an incorrect total. It seems
to
omit one particular sales order. The order has 2 lines and is the same
part
#. Can anyone help solve this?

Thanks,
Nelson Dufour


[Non-text portions of this message have been removed]
--- ## Post #281 by @system
For the report builder wizards:


Some years back we had a custom progress database built and tied to the
Vantage menu to for Gage use and calibration.

We have purchased a gage tracking package that does a much better job and I
need to extract the data from the database to input into the new package. I
am using Report Builder to create a CSV file and need some help with
extracting the data. The problem I, I only want the latest record from
linked files as follows:


Master Table is UD_GAGE with only one entry each for field SN Need all
records

First linked table is UD_GAGECAL
Linked to UD_GAGE by Field SN Want only last record by a
date field

Next linked table is UD_GAGEUSE
Linked to UD_GAGE by Field SN Want only last record by a
date field

Next Table is UD_GAGERMKS
Linked to UD_GAGE by Field SN Want only last record by a
date field


Using left outer joins on all tables.

Thanks,

Dave Cole
Reeder & Kline


[Non-text portions of this message have been removed]
--- ## Post #282 by @system
If you sort and group on the "bottom level" tables in a nested fashion than report (extract) only on the group footer for SN the records themselves for the other tables will ahve the last item in that sort order (date) for each of those tables.
-Todd C.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf Of Cole, Dave
Sent: Thursday, February 16, 2006 12:58 PM
To: eManfacturing Yahoo Groups (Vantage@...)
Subject: [Vantage] Report Builder


For the report builder wizards:


Some years back we had a custom progress database built and tied to the
Vantage menu to for Gage use and calibration.

We have purchased a gage tracking package that does a much better job and I
need to extract the data from the database to input into the new package. I
am using Report Builder to create a CSV file and need some help with
extracting the data. The problem I, I only want the latest record from
linked files as follows:


Master Table is UD_GAGE with only one entry each for field SN Need all
records

First linked table is UD_GAGECAL
Linked to UD_GAGE by Field SN Want only last record by a
date field

Next linked table is UD_GAGEUSE
Linked to UD_GAGE by Field SN Want only last record by a
date field

Next Table is UD_GAGERMKS
Linked to UD_GAGE by Field SN Want only last record by a
date field


Using left outer joins on all tables.

Thanks,

Dave Cole
Reeder & Kline


[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links




SPONSORED LINKS
Manufacturing <http://groups.yahoo.com/gads?t=ms&k=Manufacturing+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=OG5F3819UOUOg63i0bu6kA> software Membership <http://groups.yahoo.com/gads?t=ms&k=Membership+database+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=N5BGdur84p-jyuOomcQdbQ> database software Database <http://groups.yahoo.com/gads?t=ms&k=Database+mortgage+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=8rvcSQnCqJhTCZu-0Si39A> mortgage software
Pda <http://groups.yahoo.com/gads?t=ms&k=Pda+database+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=u3KQrTRPAQfsWIT39aHDkg> database software Database <http://groups.yahoo.com/gads?t=ms&k=Database+management+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=R3CF3ODPY4gwjDZjykQYvw> management software Database <http://groups.yahoo.com/gads?t=ms&k=Database+marketing+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=lmBkRUiBtvHI1u5dkymDcw> marketing software

_____

YAHOO! GROUPS LINKS



* Visit your group " vantage <http://groups.yahoo.com/group/vantage> " on the web.


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .


_____




[Non-text portions of this message have been removed]
--- ## Post #283 by @system
Further suggestion...because this is 3 layers deep. You would likely need to create artificial sort "keys" composed of SN + Date for each of the lower tables. Also slight chance for UD_GAGERMKS table a need to prepass aggregate the max date for a SN and create a fuction to grab the desired info when the MAX date = current record (meaning the last). But that's a last resort if the nested sorts don't do it.
-Todd C.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf Of Todd Caughey
Sent: Thursday, February 16, 2006 1:05 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder


If you sort and group on the "bottom level" tables in a nested fashion than report (extract) only on the group footer for SN the records themselves for the other tables will ahve the last item in that sort order (date) for each of those tables.
-Todd C.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf Of Cole, Dave
Sent: Thursday, February 16, 2006 12:58 PM
To: eManfacturing Yahoo Groups (Vantage@...)
Subject: [Vantage] Report Builder


For the report builder wizards:


Some years back we had a custom progress database built and tied to the
Vantage menu to for Gage use and calibration.

We have purchased a gage tracking package that does a much better job and I
need to extract the data from the database to input into the new package. I
am using Report Builder to create a CSV file and need some help with
extracting the data. The problem I, I only want the latest record from
linked files as follows:


Master Table is UD_GAGE with only one entry each for field SN Need all
records

First linked table is UD_GAGECAL
Linked to UD_GAGE by Field SN Want only last record by a
date field

Next linked table is UD_GAGEUSE
Linked to UD_GAGE by Field SN Want only last record by a
date field

Next Table is UD_GAGERMKS
Linked to UD_GAGE by Field SN Want only last record by a
date field


Using left outer joins on all tables.

Thanks,

Dave Cole
Reeder & Kline


[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links




SPONSORED LINKS
Manufacturing < http://groups.yahoo.com/gads?t=ms <http://groups.yahoo.com/gads?t=ms&k=Manufacturing+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=OG5F3819UOUOg63i0bu6kA> &k=Manufacturing+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=OG5F3819UOUOg63i0bu6kA> software Membership < http://groups.yahoo.com/gads?t=ms <http://groups.yahoo.com/gads?t=ms&k=Membership+database+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=N5BGdur84p-jyuOomcQdbQ> &k=Membership+database+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=N5BGdur84p-jyuOomcQdbQ> database software Database < http://groups.yahoo.com/gads?t=ms <http://groups.yahoo.com/gads?t=ms&k=Database+mortgage+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=8rvcSQnCqJhTCZu-0Si39A> &k=Database+mortgage+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=8rvcSQnCqJhTCZu-0Si39A> mortgage software
Pda < http://groups.yahoo.com/gads?t=ms <http://groups.yahoo.com/gads?t=ms&k=Pda+database+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=u3KQrTRPAQfsWIT39aHDkg> &k=Pda+database+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=u3KQrTRPAQfsWIT39aHDkg> database software Database < http://groups.yahoo.com/gads?t=ms <http://groups.yahoo.com/gads?t=ms&k=Database+management+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=R3CF3ODPY4gwjDZjykQYvw> &k=Database+management+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=R3CF3ODPY4gwjDZjykQYvw> management software Database < http://groups.yahoo.com/gads?t=ms <http://groups.yahoo.com/gads?t=ms&k=Database+marketing+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=lmBkRUiBtvHI1u5dkymDcw> &k=Database+marketing+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=lmBkRUiBtvHI1u5dkymDcw> marketing software

_____

YAHOO! GROUPS LINKS



* Visit your group " vantage < http://groups.yahoo.com/group/vantage> " on the web.


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service < http://docs.yahoo.com/info/terms/> .


_____




[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links




SPONSORED LINKS
Manufacturing <http://groups.yahoo.com/gads?t=ms&k=Manufacturing+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=OG5F3819UOUOg63i0bu6kA> software Membership <http://groups.yahoo.com/gads?t=ms&k=Membership+database+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=N5BGdur84p-jyuOomcQdbQ> database software Database <http://groups.yahoo.com/gads?t=ms&k=Database+mortgage+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=8rvcSQnCqJhTCZu-0Si39A> mortgage software
Pda <http://groups.yahoo.com/gads?t=ms&k=Pda+database+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=u3KQrTRPAQfsWIT39aHDkg> database software Database <http://groups.yahoo.com/gads?t=ms&k=Database+management+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=R3CF3ODPY4gwjDZjykQYvw> management software Database <http://groups.yahoo.com/gads?t=ms&k=Database+marketing+software&w1=Manufacturing+software&w2=Membership+database+software&w3=Database+mortgage+software&w4=Pda+database+software&w5=Database+management+software&w6=Database+marketing+software&c=6&s=188&.sig=lmBkRUiBtvHI1u5dkymDcw> marketing software

_____

YAHOO! GROUPS LINKS



* Visit your group " vantage <http://groups.yahoo.com/group/vantage> " on the web.


* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>


* Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .


_____




[Non-text portions of this message have been removed]
--- ## Post #284 by @system
I think this would be easier done with a progress query:

For each UD_Gage
for each UD_Gagecal by date:
assign Gagecal = UD_Gagecal.
end.
for each UD_Gageuse by date:
assign Gageuse = UD_Gageuse.
end.
for each UD_Gagemks by date:
assign Gagemks = UD_Gagemks.
end.
put UD_Gage + "," + UD_Gagecal + "," .....
end.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf
Of Cole, Dave
Sent: Thursday, February 16, 2006 12:58 PM
To: eManfacturing Yahoo Groups (Vantage@...)
Subject: [Vantage] Report Builder


For the report builder wizards:


Some years back we had a custom progress database built and tied to the
Vantage menu to for Gage use and calibration.

We have purchased a gage tracking package that does a much better job and I
need to extract the data from the database to input into the new package. I
am using Report Builder to create a CSV file and need some help with
extracting the data. The problem I, I only want the latest record from
linked files as follows:


Master Table is UD_GAGE with only one entry each for field SN Need all
records

First linked table is UD_GAGECAL
Linked to UD_GAGE by Field SN Want only last record by a
date field

Next linked table is UD_GAGEUSE
Linked to UD_GAGE by Field SN Want only last record by a
date field

Next Table is UD_GAGERMKS
Linked to UD_GAGE by Field SN Want only last record by a
date field


Using left outer joins on all tables.

Thanks,

Dave Cole
Reeder & Kline


[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links
--- ## Post #285 by @system
HELLO!



Is there away to tell report builder to wrap text?



Have a Nice Day,



Dina Hieber

Vamco International, Inc.

Phone (412) 963-7100

Fax; (412) 963-7160



www.vamcointernational.com





[Non-text portions of this message have been removed]
--- ## Post #286 by @system
The Alignment option for a field (right click on field) has a Word Wrap selection. Then in format set the width to less than the field size. Such as field size 120 but width 40 will wrap to three lines worth (as needed).
-Todd C.


-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com]On Behalf Of dhieber
Sent: Friday, December 15, 2006 10:03 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder



HELLO!

Is there away to tell report builder to wrap text?

Have a Nice Day,

Dina Hieber

Vamco International, Inc.

Phone (412) 963-7100

Fax; (412) 963-7160

www.vamcointernational.com

[Non-text portions of this message have been removed]







[Non-text portions of this message have been removed]
--- ## Post #287 by @system
Yes, there is. Right click on the field and select alignment. Then
select "Word Wrap". You probably need to increase the character format
field if you need more than 50 characters.



Randall Lunsford
Excel Machinery, Ltd.
e-mail: rlunsf@...
Phone: (806) 335-4565 ext. 531
Fax: (806) 335-9017

________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of dhieber
Sent: Friday, December 15, 2006 10:03 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder



HELLO!

Is there away to tell report builder to wrap text?

Have a Nice Day,

Dina Hieber

Vamco International, Inc.

Phone (412) 963-7100

Fax; (412) 963-7160

www.vamcointernational.com






[Non-text portions of this message have been removed]
--- ## Post #288 by @system
I swear I looked every where for this. I can't believe I missed it.. Thank
god it is Friday.



Another stupid question - I am trying to write a report that prints out
parts that were bought in the last year - does anyone have anything like
that?



Have a Nice Day,



Dina Hieber

Vamco International, Inc.

Phone (412) 963-7100

Fax; (412) 963-7160



www.vamcointernational.com

_____

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Todd Caughey
Sent: Friday, December 15, 2006 11:12 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Report Builder



The Alignment option for a field (right click on field) has a Word Wrap
selection. Then in format set the width to less than the field size. Such as
field size 120 but width 40 will wrap to three lines worth (as needed).
-Todd C.


-----Original Message-----
From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com]On
Behalf Of dhieber
Sent: Friday, December 15, 2006 10:03 AM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: [Vantage] Report Builder

HELLO!

Is there away to tell report builder to wrap text?

Have a Nice Day,

Dina Hieber

Vamco International, Inc.

Phone (412) 963-7100

Fax; (412) 963-7160

www.vamcointernational.com

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
--- ## Post #289 by @system
I am running a report filtering by a labordtl.clockindate range. Is
there any way I can have it count the days from the range in the
filter and display them on my report?
--- ## Post #290 by @system
Two parts....
1. Get the filter dates into the report
2. Subtract one date ffrom the other to get the difference in days

For extracting dates from filter use the following formula and aggregate fields....note, due to aggregate usage there are some cases where further aggregate derived from data dependent on them (such as in test) will not function...a limitation in RB.

PrtFilter = Report-Filter() ! (system function)

ParseFilter = Minimum(PrtFilter) ! must pass thru aggregate due to indirect use of function

Start-From: INDEX(ParseFilter,'/') - 2
Start-To: INDEX-NTH(ParseFilter,'/',3) - 2

What these do is to find the first "slash" and backup two characters to the start of the date. Then the next one finds the third "slash" using the INDEX-NTH function and does the same. If you had several date ranges just set the NTH part accordingly. The only reason this method might not work is if you have filters that contain slashes. Otherwise this method works really well if you happen to need to add another filter ahead of the dates (usually for performance reasons). The starting point for looking for the first date's "Equal To" will not change on you.

FromDate: SUBSTRING(ParseFilter,Start-From,10)
ToDate: SUBSTRING(ParseFilter,Start-to,10)

FromDate and ToDate are the dates you can use in the heading of the report. Or if you have only one date you can skip the other.

Similar to getting dates other data can be obtained from filter such as manual entry of counts or tru/false values for printing detail lines or not.

-Todd C.




________________________________
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of ctultra_met
Sent: Thursday, June 28, 2007 11:26 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Report Builder


I am running a report filtering by a labordtl.clockindate range. Is
there any way I can have it count the days from the range in the
filter and display them on my report?



________________________________
The information contained in this E-mail message and any documents which may be attached are privileged and confidential, and may be protected from disclosure.

Please be aware that any use, printing, copying, disclosure or dissemination of this communication may be subject to legal restriction or sanction. If you think you have received this message in error, please reply to the sender.

For more information please visit www.harveyvogel.com


[Non-text portions of this message have been removed]
--- **Canonical:** https://www.epiusers.help/t/zero-balance-a-p-invoice/504 **Original content:** https://www.epiusers.help/t/zero-balance-a-p-invoice/504