# 1 person doing 3 operations at one time

We came across a situation in our assembly area where an employee was
logged into 3 assembly operations at the same time. The reason we had
him logged into all 3 at the same time is that we wanted his labor
time to be split between the 3 operations. The problem we found is 8
hours of burden is being charged to each of the assembly operations
and it is over stating the actual cost of the job.

Any help with this problem would be appreciated.
In workcenter maintenance, select the 'split burden' checkbox.

----- Original Message -----
From: Marty
To: vantage@yahoogroups.com
Sent: Wednesday, February 11, 2009 1:37 PM
Subject: [Vantage] 1 person doing 3 operations at one time

We came across a situation in our assembly area where an employee was
logged into 3 assembly operations at the same time. The reason we had
him logged into all 3 at the same time is that we wanted his labor
time to be split between the 3 operations. The problem we found is 8
hours of burden is being charged to each of the assembly operations
and it is over stating the actual cost of the job.

Any help with this problem would be appreciated.

[Non-text portions of this message have been removed]
Where is workcenter Maintenance?

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
gclauser
Sent: Wednesday, February 11, 2009 4:09 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] 1 person doing 3 operations at one time

In workcenter maintenance, select the 'split burden' checkbox.

----- Original Message -----
From: Marty
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Sent: Wednesday, February 11, 2009 1:37 PM
Subject: [Vantage] 1 person doing 3 operations at one time

We came across a situation in our assembly area where an employee was
logged into 3 assembly operations at the same time. The reason we had
him logged into all 3 at the same time is that we wanted his labor
time to be split between the 3 operations. The problem we found is 8
hours of burden is being charged to each of the assembly operations
and it is over stating the actual cost of the job.

Any help with this problem would be appreciated.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

--- On Wed, 2/11/09, Jeff Stockard <jeff.stockard@...> wrote:
From: Jeff Stockard <jeff.stockard@...>
Subject: RE: [Vantage] 1 person doing 3 operations at one time
To: vantage@yahoogroups.com
Date: Wednesday, February 11, 2009, 4:19 PM

Where is workcenter Maintenance?

From: vantage@yahoogroups .com [mailto:vantage@yahoogroups .com] On Behalf Of

gclauser

Sent: Wednesday, February 11, 2009 4:09 PM

To: vantage@yahoogroups .com

Subject: Re: [Vantage] 1 person doing 3 operations at one time

In workcenter maintenance, select the 'split burden' checkbox.

----- Original Message -----

From: Marty

To: vantage@yahoogroups .com <mailto:vantage% 40yahoogroups. com>

Sent: Wednesday, February 11, 2009 1:37 PM

Subject: [Vantage] 1 person doing 3 operations at one time

We came across a situation in our assembly area where an employee was

logged into 3 assembly operations at the same time. The reason we had

him logged into all 3 at the same time is that we wanted his labor

time to be split between the 3 operations. The problem we found is 8

hours of burden is being charged to each of the assembly operations

and it is over stating the actual cost of the job.

Any help with this problem would be appreciated.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]
Instead of Selecting Split Burden. Don't you want Burden=Labor ??

This way if I am logged into 3 assembly jobs and my labor is split
Equally between the 3 jobs the burden also will be split the same.
So my total burden between the 3 jobs will be 8 hours and not 24.

thanks for everyone else with this question..

--- In vantage@yahoogroups.com, Robert Brown <robertb_versa@...>
wrote:
>
>
> If you're v8: Scheduling/Setup/ResourceGroup submenu
>
> --- On Wed, 2/11/09, Jeff Stockard <jeff.stockard@...> wrote:
> From: Jeff Stockard <jeff.stockard@...>
> Subject: RE: [Vantage] 1 person doing 3 operations at one time
> To: vantage@yahoogroups.com
> Date: Wednesday, February 11, 2009, 4:19 PM
>
>
>
>
>
>
>
>
>
>
>
>
> Where is workcenter Maintenance?
>
>
>
> From: vantage@yahoogroups .com [mailto:vantage@yahoogroups .com]
On Behalf Of
>
> gclauser
>
> Sent: Wednesday, February 11, 2009 4:09 PM
>
> To: vantage@yahoogroups .com
>
> Subject: Re: [Vantage] 1 person doing 3 operations at one time
>
>
>
> In workcenter maintenance, select the 'split burden' checkbox.
>
>
>
> ----- Original Message -----
>
> From: Marty
>
> To: vantage@yahoogroups .com <mailto:vantage% 40yahoogroups. com>
>
> Sent: Wednesday, February 11, 2009 1:37 PM
>
> Subject: [Vantage] 1 person doing 3 operations at one time
>
>
>
> We came across a situation in our assembly area where an employee
was
>
> logged into 3 assembly operations at the same time. The reason we
>
> him logged into all 3 at the same time is that we wanted his labor
>
> time to be split between the 3 operations. The problem we found is
8
>
> hours of burden is being charged to each of the assembly
operations
>
> and it is over stating the actual cost of the job.
>
>
>
> Any help with this problem would be appreciated.
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> [Non-text portions of this message have been removed]
>
We have 1 operator doing 3 jobs at once.
The UOM is feet.
So 1 job is 5 feet, 1 job is 100 feet, and 1 job is 25 feet.
He does the operation for all 3 jobs at once so he clocks into all 3 at once.
However, we want the labor divided based on the Job Quantity so that the job for 100 feet gets more labor assigned that the other jobs. Is this possible? we are on 905701