BPM Warning with response

system · May 16, 2012, 9:28am

That was it . Thanks.

Mike

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
bw2868bond
Sent: Wednesday, May 16, 2012 9:09 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: BPM Warning with response

Curly braces instead of parens around {lib\PublishInfoMsg.i.....

--- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> , "Mike
Numbers" <mnumbers@...> wrote:

>
> Jose,
>
> When I try to validate the ABL Action, I get an error message ** Unable to
> understand after -- "(". (247)
> ** Invalid statement. (254). I think this is referencing the
> (lib\PublishInfoMsg.i ...... statement. What can I do to fix this?
>
> Thanks again for your help.
>
> Mike
>
> -----Original Message-----
> From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>

[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf Of

> Jose Gomez
> Sent: Tuesday, May 15, 2012 2:35 PM
> To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> Subject: Re: [Vantage] Re: BPM Warning with response
>
> Here you go, don't have time to do a write up, if you have questions let

me

> know
>
> http://www.youtube.com/watch?v=zT4iZW1KeLc

<http://www.youtube.com/watch?v=zT4iZW1KeLc&feature=youtu.be>
&feature=youtu.be

>
>
>
> *Jose C Gomez*
> *Software Engineer*
> *
> *
> *checkout my new blog <http://www.usdoingstuff.com> *
> *
> *T: 904.469.1524 mobile
> E: jose@...
> http://www.josecgomez.com
> <http://www.linkedin.com/in/josecgomez>

<http://www.facebook.com/josegomez>

> <http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
> <http://www.josecgomez.com/professional-resume/>
> <http://www.josecgomez.com/feed/>
> <http://www.usdoingstuff.com>
>
> *Quis custodiet ipsos custodes?*
>
>
>
> On Tue, May 15, 2012 at 1:57 PM, Ted Koch <tkoch77@...> wrote:
>
> > **
> >
> >
> > Thanks Jose, I would appreciate that!
> >
> > ________________________________
> > From: Jose Gomez <jose@...>
> > To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> > Sent: Tuesday, May 15, 2012 1:10 PM
> > Subject: Re: [Vantage] Re: BPM Warning with response
> >
> >
> > You can do this fairly easy simply put a customization on the bpm data
> > form which when you click the cancel button just closes the form then
> > make sure that your action is tied to a value on the data form. If i
> > have some time ill scribble something uo for you On May 15, 2012 12:54
> > PM, "pbparker" <scrumbus@...> wrote:
> >
> > > **
> >
> > >
> > >
> > > As it is now, any button has the same action as a "OK" button, in
> > > that it moves forward.
> > >
> > > I talked to Tony Wilby (VP of R&D at Epicor) at Insights and told
> > > him
> > what
> > > they really needed was a baked in "OK" and "Cancel" that on the
> > pre-process
> > > would stop any progress towards the base method if the user clicked
> > > "Cancel".
> > >
> > > He agreed - I said what would be perfect would be some way of
> > > kicking out an exception that was silent to basically stop forward
> > > progress to the
> > base
> > > method and then return them to the current form.
> > >
> > > If there's some other way of easily accomplishing this, I'm not
> > > aware of it.
> > >
> > > --- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ,

"tkoch77" <tkoch77@> wrote:

> > > >
> > > > Mike,
> > > >
> > > > Any luck with this? I'm trying something similar as well...
> > > >
> > > > --- In vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ,

"mike.numbers" <mnumbers@> wrote:

> > > > >
> > > > > I have read a couple of threads that seem to address this, but I
> > still
> > > don't get it. Hopefully someone help me see the light.
> > > > > Epicor 9.04.507a
> > > > > I am trying to warn our user if he tries to issue material from
> > > > > one
> > > warehouse to another warehouse. This may be valid so I need a BPM
> > > that creates a warning when this happens and allows the user to stop
> > > or continue. I have a condition that identifies when 2 warehouses
> > > are involved. I have created a BPM data form with 2 buttons, ok and
> > > stop. My question is how do I make this an action and then react to
> > > the user response.
> > > > >
> > > >
> > >
> > >
> > >
> >
> > [Non-text portions of this message have been removed]
> >
> > ------------------------------------
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> > have already linked your email address to a yahoo id to enable access.
> > )
> > (1) To access the Files Section of our Yahoo!Group for Report Builder
> > and Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.

<http://groups.yahoo.com/group/vantage/files/>

> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> > http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.

<http://groups.yahoo.com/group/vantage/files/>

> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>

[Non-text portions of this message have been removed]

system · March 28, 2012, 1:36pm

I have read a couple of threads that seem to address this, but I still don't get it. Hopefully someone help me see the light.
Epicor 9.04.507a
I am trying to warn our user if he tries to issue material from one warehouse to another warehouse. This may be valid so I need a BPM that creates a warning when this happens and allows the user to stop or continue. I have a condition that identifies when 2 warehouses are involved. I have created a BPM data form with 2 buttons, ok and stop. My question is how do I make this an action and then react to the user response.

system · May 15, 2012, 12:06pm

Mike,

Any luck with this? I'm trying something similar as well...

--- In vantage@yahoogroups.com, "mike.numbers" <mnumbers@...> wrote:
>
> I have read a couple of threads that seem to address this, but I still don't get it. Hopefully someone help me see the light.
> Epicor 9.04.507a
> I am trying to warn our user if he tries to issue material from one warehouse to another warehouse. This may be valid so I need a BPM that creates a warning when this happens and allows the user to stop or continue. I have a condition that identifies when 2 warehouses are involved. I have created a BPM data form with 2 buttons, ok and stop. My question is how do I make this an action and then react to the user response.
>

system · May 15, 2012, 12:54pm

As it is now, any button has the same action as a "OK" button, in that it moves forward.

I talked to Tony Wilby (VP of R&D at Epicor) at Insights and told him what they really needed was a baked in "OK" and "Cancel" that on the pre-process would stop any progress towards the base method if the user clicked "Cancel".

He agreed - I said what would be perfect would be some way of kicking out an exception that was silent to basically stop forward progress to the base method and then return them to the current form.

If there's some other way of easily accomplishing this, I'm not aware of it.

--- In vantage@yahoogroups.com, "tkoch77" <tkoch77@...> wrote:
>
> Mike,
>
> Any luck with this? I'm trying something similar as well...
>
> --- In vantage@yahoogroups.com, "mike.numbers" <mnumbers@> wrote:
> >
> > I have read a couple of threads that seem to address this, but I still don't get it. Hopefully someone help me see the light.
> > Epicor 9.04.507a
> > I am trying to warn our user if he tries to issue material from one warehouse to another warehouse. This may be valid so I need a BPM that creates a warning when this happens and allows the user to stop or continue. I have a condition that identifies when 2 warehouses are involved. I have created a BPM data form with 2 buttons, ok and stop. My question is how do I make this an action and then react to the user response.
> >
>

system · May 15, 2012, 1:07pm

What I'm really trying to do is if the users selects Yes, it enables a post-processing directive, and if they select No it doesn't stop the method from finishing but doesn't enable the post-processing directive.

I'm thinking I could do this in the background by customizing the form and if they select Yes then make BPMData.ShortChar01 = "yes", No makes BPMData.ShortChar01 = "no" and then key off that with a post-processing condition, if BPMData.ShortChar01 = "yes" then the post-processing action will be triggered.

________________________________
From: pbparker <scrumbus@...>
To: vantage@yahoogroups.com
Sent: Tuesday, May 15, 2012 12:54 PM
Subject: [Vantage] Re: BPM Warning with response

As it is now, any button has the same action as a "OK" button, in that it moves forward.

I talked to Tony Wilby (VP of R&D at Epicor) at Insights and told him what they really needed was a baked in "OK" and "Cancel" that on the pre-process would stop any progress towards the base method if the user clicked "Cancel".

He agreed - I said what would be perfect would be some way of kicking out an exception that was silent to basically stop forward progress to the base method and then return them to the current form.

If there's some other way of easily accomplishing this, I'm not aware of it.

--- In vantage@yahoogroups.com, "tkoch77" <tkoch77@...> wrote:
>
> Mike,
>
> Any luck with this? I'm trying something similar as well...
>
> --- In vantage@yahoogroups.com, "mike.numbers" <mnumbers@> wrote:
> >
> > I have read a couple of threads that seem to address this, but I still don't get it.Â Hopefully someone help me see the light.
> > Epicor 9.04.507a
> > I am trying to warn our user if he tries to issue material from one warehouse to another warehouse.Â This may be valid so I need a BPM that creates a warning when this happens and allows the user to stop or continue.Â I have a condition that identifies when 2 warehouses are involved.Â I have created a BPM data form with 2 buttons, ok and stop. My question is how do I make this an action and then react to the user response.
> >
>

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note:Â You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.%c2%a0
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

[Non-text portions of this message have been removed]

system · May 15, 2012, 1:10pm

You can do this fairly easy simply put a customization on the bpm data form
which when you click the cancel button just closes the form then make sure
that your action is tied to a value on the data form. If i have some time
ill scribble something uo for you

On May 15, 2012 12:54 PM, "pbparker" <scrumbus@...> wrote:

> **
>
>
> As it is now, any button has the same action as a "OK" button, in that it
> moves forward.
>
> I talked to Tony Wilby (VP of R&D at Epicor) at Insights and told him what
> they really needed was a baked in "OK" and "Cancel" that on the pre-process
> would stop any progress towards the base method if the user clicked
> "Cancel".
>
> He agreed - I said what would be perfect would be some way of kicking out
> an exception that was silent to basically stop forward progress to the base
> method and then return them to the current form.
>
> If there's some other way of easily accomplishing this, I'm not aware of
> it.
>
> --- In vantage@yahoogroups.com, "tkoch77" <tkoch77@...> wrote:
> >
> > Mike,
> >
> > Any luck with this? I'm trying something similar as well...
> >
> > --- In vantage@yahoogroups.com, "mike.numbers" <mnumbers@> wrote:
> > >
> > > I have read a couple of threads that seem to address this, but I still
> don't get it. Hopefully someone help me see the light.
> > > Epicor 9.04.507a
> > > I am trying to warn our user if he tries to issue material from one
> warehouse to another warehouse. This may be valid so I need a BPM that
> creates a warning when this happens and allows the user to stop or
> continue. I have a condition that identifies when 2 warehouses are
> involved. I have created a BPM data form with 2 buttons, ok and stop. My
> question is how do I make this an action and then react to the user
> response.
> > >
> >
>
>
>

[Non-text portions of this message have been removed]

system · May 15, 2012, 1:57pm

Thanks Jose, I would appreciate that!

________________________________
From: Jose Gomez <jose@...>
To: vantage@yahoogroups.com
Sent: Tuesday, May 15, 2012 1:10 PM
Subject: Re: [Vantage] Re: BPM Warning with response

You can do this fairly easy simply put a customization on the bpm data form
which when you click the cancel button just closes the form then make sure
that your action is tied to a value on the data form. If i have some time
ill scribble something uo for you

On May 15, 2012 12:54 PM, "pbparker" <scrumbus@...> wrote:

> **
>
>
> As it is now, any button has the same action as a "OK" button, in that it
> moves forward.
>
> I talked to Tony Wilby (VP of R&D at Epicor) at Insights and told him what
> they really needed was a baked in "OK" and "Cancel" that on the pre-process
> would stop any progress towards the base method if the user clicked
> "Cancel".
>
> He agreed - I said what would be perfect would be some way of kicking out
> an exception that was silent to basically stop forward progress to the base
> method and then return them to the current form.
>
> If there's some other way of easily accomplishing this, I'm not aware of
> it.
>
> --- In vantage@yahoogroups.com, "tkoch77" <tkoch77@...> wrote:
> >
> > Mike,
> >
> > Any luck with this? I'm trying something similar as well...
> >
> > --- In vantage@yahoogroups.com, "mike.numbers" <mnumbers@> wrote:
> > >
> > > I have read a couple of threads that seem to address this, but I still
> don't get it. Hopefully someone help me see the light.
> > > Epicor 9.04.507a
> > > I am trying to warn our user if he tries to issue material from one
> warehouse to another warehouse. This may be valid so I need a BPM that
> creates a warning when this happens and allows the user to stop or
> continue. I have a condition that identifies when 2 warehouses are
> involved. I have created a BPM data form with 2 buttons, ok and stop. My
> question is how do I make this an action and then react to the user
> response.
> > >
> >
>
>Â
>

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note:Â You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.%c2%a0
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

[Non-text portions of this message have been removed]

system · May 15, 2012, 2:35pm

Here you go, don't have time to do a write up, if you have questions let me
know

http://www.youtube.com/watch?v=zT4iZW1KeLc&feature=youtu.be

*Jose C Gomez*
*Software Engineer*
*
*
*checkout my new blog <http://www.usdoingstuff.com> *
*
*T: 904.469.1524 mobile
E: jose@...
http://www.josecgomez.com
<http://www.linkedin.com/in/josecgomez> <http://www.facebook.com/josegomez>
<http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
<http://www.josecgomez.com/professional-resume/>
<http://www.josecgomez.com/feed/>
<http://www.usdoingstuff.com>

*Quis custodiet ipsos custodes?*

On Tue, May 15, 2012 at 1:57 PM, Ted Koch <tkoch77@...> wrote:

> **
>
>
> Thanks Jose, I would appreciate that!
>
> ________________________________
> From: Jose Gomez <jose@...>
> To: vantage@yahoogroups.com
> Sent: Tuesday, May 15, 2012 1:10 PM
> Subject: Re: [Vantage] Re: BPM Warning with response
>
>
> You can do this fairly easy simply put a customization on the bpm data form
> which when you click the cancel button just closes the form then make sure
> that your action is tied to a value on the data form. If i have some time
> ill scribble something uo for you
> On May 15, 2012 12:54 PM, "pbparker" <scrumbus@...> wrote:
>
> > **
>
> >
> >
> > As it is now, any button has the same action as a "OK" button, in that it
> > moves forward.
> >
> > I talked to Tony Wilby (VP of R&D at Epicor) at Insights and told him
> what
> > they really needed was a baked in "OK" and "Cancel" that on the
> pre-process
> > would stop any progress towards the base method if the user clicked
> > "Cancel".
> >
> > He agreed - I said what would be perfect would be some way of kicking out
> > an exception that was silent to basically stop forward progress to the
> base
> > method and then return them to the current form.
> >
> > If there's some other way of easily accomplishing this, I'm not aware of
> > it.
> >
> > --- In vantage@yahoogroups.com, "tkoch77" <tkoch77@...> wrote:
> > >
> > > Mike,
> > >
> > > Any luck with this? I'm trying something similar as well...
> > >
> > > --- In vantage@yahoogroups.com, "mike.numbers" <mnumbers@> wrote:
> > > >
> > > > I have read a couple of threads that seem to address this, but I
> still
> > don't get it. Hopefully someone help me see the light.
> > > > Epicor 9.04.507a
> > > > I am trying to warn our user if he tries to issue material from one
> > warehouse to another warehouse. This may be valid so I need a BPM that
> > creates a warning when this happens and allows the user to stop or
> > continue. I have a condition that identifies when 2 warehouses are
> > involved. I have created a BPM data form with 2 buttons, ok and stop. My
> > question is how do I make this an action and then react to the user
> > response.
> > > >
> > >
> >
> >
> >
>
> [Non-text portions of this message have been removed]
>
> ------------------------------------
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>
> [Non-text portions of this message have been removed]
>
>
>

[Non-text portions of this message have been removed]

system · May 15, 2012, 2:42pm

Ahh that's nice. Similar to what Tony just sent me, he added a BPM in order after the initial one that called an exception, but yours is much cleaner and self-contained.

Wish there was a silent exception though where a cancel simply returned back to the previous page, but I guess I'll go with what I have available and be thankful I have that.

Also since Tony sent me a response pointing to a similar example, I'm guessing a silent exception isn't going to happen.

As a side note, what software did you use to record that little example, kinda nice in the zooming effect. Camtasia or something?

Thanks for the example Jose.

--- In vantage@yahoogroups.com, Jose Gomez <jose@...> wrote:
>
> Here you go, don't have time to do a write up, if you have questions let me
> know
>
> http://www.youtube.com/watch?v=zT4iZW1KeLc&feature=youtu.be
>
>
>
> *Jose C Gomez*
> *Software Engineer*
> *
> *
> *checkout my new blog <http://www.usdoingstuff.com> *
> *
> *T: 904.469.1524 mobile
> E: jose@...
> http://www.josecgomez.com
> <http://www.linkedin.com/in/josecgomez> <http://www.facebook.com/josegomez>
> <http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
> <http://www.josecgomez.com/professional-resume/>
> <http://www.josecgomez.com/feed/>
> <http://www.usdoingstuff.com>
>
> *Quis custodiet ipsos custodes?*
>
>
>
> On Tue, May 15, 2012 at 1:57 PM, Ted Koch <tkoch77@...> wrote:
>
> > **
> >
> >
> > Thanks Jose, I would appreciate that!
> >
> > ________________________________
> > From: Jose Gomez <jose@...>
> > To: vantage@yahoogroups.com
> > Sent: Tuesday, May 15, 2012 1:10 PM
> > Subject: Re: [Vantage] Re: BPM Warning with response
> >
> >
> > You can do this fairly easy simply put a customization on the bpm data form
> > which when you click the cancel button just closes the form then make sure
> > that your action is tied to a value on the data form. If i have some time
> > ill scribble something uo for you
> > On May 15, 2012 12:54 PM, "pbparker" <scrumbus@...> wrote:
> >
> > > **
> >
> > >
> > >
> > > As it is now, any button has the same action as a "OK" button, in that it
> > > moves forward.
> > >
> > > I talked to Tony Wilby (VP of R&D at Epicor) at Insights and told him
> > what
> > > they really needed was a baked in "OK" and "Cancel" that on the
> > pre-process
> > > would stop any progress towards the base method if the user clicked
> > > "Cancel".
> > >
> > > He agreed - I said what would be perfect would be some way of kicking out
> > > an exception that was silent to basically stop forward progress to the
> > base
> > > method and then return them to the current form.
> > >
> > > If there's some other way of easily accomplishing this, I'm not aware of
> > > it.
> > >
> > > --- In vantage@yahoogroups.com, "tkoch77" <tkoch77@> wrote:
> > > >
> > > > Mike,
> > > >
> > > > Any luck with this? I'm trying something similar as well...
> > > >
> > > > --- In vantage@yahoogroups.com, "mike.numbers" <mnumbers@> wrote:
> > > > >
> > > > > I have read a couple of threads that seem to address this, but I
> > still
> > > don't get it. Hopefully someone help me see the light.
> > > > > Epicor 9.04.507a
> > > > > I am trying to warn our user if he tries to issue material from one
> > > warehouse to another warehouse. This may be valid so I need a BPM that
> > > creates a warning when this happens and allows the user to stop or
> > > continue. I have a condition that identifies when 2 warehouses are
> > > involved. I have created a BPM data form with 2 buttons, ok and stop. My
> > > question is how do I make this an action and then react to the user
> > > response.
> > > > >
> > > >
> > >
> > >
> > >
> >
> > [Non-text portions of this message have been removed]
> >
> > ------------------------------------
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> > have already linked your email address to a yahoo id to enable access. )
> > (1) To access the Files Section of our Yahoo!Group for Report Builder and
> > Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> > http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
>

system · May 15, 2012, 2:46pm

Camtasia indeed!

*Jose C Gomez*
*Software Engineer*
*
*
*checkout my new blog <http://www.usdoingstuff.com> *
*
*T: 904.469.1524 mobile
E: jose@...
http://www.josecgomez.com
<http://www.linkedin.com/in/josecgomez> <http://www.facebook.com/josegomez>
<http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
<http://www.josecgomez.com/professional-resume/>
<http://www.josecgomez.com/feed/>
<http://www.usdoingstuff.com>

*Quis custodiet ipsos custodes?*

On Tue, May 15, 2012 at 2:42 PM, pbparker <scrumbus@...> wrote:

> **
>
>
> Ahh that's nice. Similar to what Tony just sent me, he added a BPM in
> order after the initial one that called an exception, but yours is much
> cleaner and self-contained.
>
> Wish there was a silent exception though where a cancel simply returned
> back to the previous page, but I guess I'll go with what I have available
> and be thankful I have that.
>
> Also since Tony sent me a response pointing to a similar example, I'm
> guessing a silent exception isn't going to happen.
>
> As a side note, what software did you use to record that little example,
> kinda nice in the zooming effect. Camtasia or something?
>
> Thanks for the example Jose.
>
>
> --- In vantage@yahoogroups.com, Jose Gomez <jose@...> wrote:
> >
> > Here you go, don't have time to do a write up, if you have questions let
> me
> > know
> >
> > http://www.youtube.com/watch?v=zT4iZW1KeLc&feature=youtu.be
> >
> >
> >
> > *Jose C Gomez*
> > *Software Engineer*
> > *
> > *
> > *checkout my new blog <http://www.usdoingstuff.com> *
> > *
> > *T: 904.469.1524 mobile
> > E: jose@...
> > http://www.josecgomez.com
> > <http://www.linkedin.com/in/josecgomez> <
> http://www.facebook.com/josegomez>
> > <http://www.google.com/profiles/jose.gomez> <
> http://www.twitter.com/joc85>
> > <http://www.josecgomez.com/professional-resume/>
> > <http://www.josecgomez.com/feed/>
> > <http://www.usdoingstuff.com>
> >
> > *Quis custodiet ipsos custodes?*
> >
> >
> >
> > On Tue, May 15, 2012 at 1:57 PM, Ted Koch <tkoch77@...> wrote:
> >
> > > **
>
> > >
> > >
> > > Thanks Jose, I would appreciate that!
> > >
> > > ________________________________
> > > From: Jose Gomez <jose@...>
>
> > > To: vantage@yahoogroups.com
> > > Sent: Tuesday, May 15, 2012 1:10 PM
> > > Subject: Re: [Vantage] Re: BPM Warning with response
> > >
> > >
> > > You can do this fairly easy simply put a customization on the bpm data
> form
> > > which when you click the cancel button just closes the form then make
> sure
> > > that your action is tied to a value on the data form. If i have some
> time
> > > ill scribble something uo for you
> > > On May 15, 2012 12:54 PM, "pbparker" <scrumbus@...> wrote:
> > >
> > > > **
> > >
> > > >
> > > >
> > > > As it is now, any button has the same action as a "OK" button, in
> that it
> > > > moves forward.
> > > >
> > > > I talked to Tony Wilby (VP of R&D at Epicor) at Insights and told him
> > > what
> > > > they really needed was a baked in "OK" and "Cancel" that on the
> > > pre-process
> > > > would stop any progress towards the base method if the user clicked
> > > > "Cancel".
> > > >
> > > > He agreed - I said what would be perfect would be some way of
> kicking out
> > > > an exception that was silent to basically stop forward progress to
> the
> > > base
> > > > method and then return them to the current form.
> > > >
> > > > If there's some other way of easily accomplishing this, I'm not
> aware of
> > > > it.
> > > >
> > > > --- In vantage@yahoogroups.com, "tkoch77" <tkoch77@> wrote:
> > > > >
> > > > > Mike,
> > > > >
> > > > > Any luck with this? I'm trying something similar as well...
> > > > >
> > > > > --- In vantage@yahoogroups.com, "mike.numbers" <mnumbers@> wrote:
> > > > > >
> > > > > > I have read a couple of threads that seem to address this, but I
> > > still
> > > > don't get it. Hopefully someone help me see the light.
> > > > > > Epicor 9.04.507a
> > > > > > I am trying to warn our user if he tries to issue material from
> one
> > > > warehouse to another warehouse. This may be valid so I need a BPM
> that
> > > > creates a warning when this happens and allows the user to stop or
> > > > continue. I have a condition that identifies when 2 warehouses are
> > > > involved. I have created a BPM data form with 2 buttons, ok and
> stop. My
> > > > question is how do I make this an action and then react to the user
> > > > response.
> > > > > >
> > > > >
> > > >
> > > >
> > > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > > ------------------------------------
> > >
> > >
> > > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> > > have already linked your email address to a yahoo id to enable access.
> )
> > > (1) To access the Files Section of our Yahoo!Group for Report Builder
> and
> > > Crystal Reports and other 'goodies', please goto:
> > > http://groups.yahoo.com/group/vantage/files/.
> > > (2) To search through old msg's goto:
> > > http://groups.yahoo.com/group/vantage/messages
> > > (3) To view links to Vendors that provide Vantage services goto:
> > > http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>

[Non-text portions of this message have been removed]

system · May 15, 2012, 3:15pm

Awesome, thanks a lot Jose! Seeing how you can use those sequence numbers from the data form designer explained everything.

Pre-processing Action:
Call the Scheduling BPM Data Form using no customization always
and enable dependent post process directives

Post-processing Condition:
this directive has been enabled from the Enable Lower Leverl Scheduling directive
and the ttCallContextBpmData.ButtonValue field is equal to the 1112 expression

________________________________
From: Jose Gomez <jose@...>
To: vantage@yahoogroups.com
Sent: Tuesday, May 15, 2012 2:34 PM
Subject: Re: [Vantage] Re: BPM Warning with response

Here you go, don't have time to do a write up, if you have questions let me
know

http://www.youtube.com/watch?v=zT4iZW1KeLc&feature=youtu.be

*Jose C Gomez*
*Software Engineer*
*
*
*checkout my new blog <http://www.usdoingstuff.com> *
*
*T: 904.469.1524 mobile
E: jose@...
http://www.josecgomez.com
<http://www.linkedin.com/in/josecgomez>Â <http://www.facebook.com/josegomez>
Â <http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
Â <http://www.josecgomez.com/professional-resume/>
<http://www.josecgomez.com/feed/>
Â <http://www.usdoingstuff.com>

*Quis custodiet ipsos custodes?*

On Tue, May 15, 2012 at 1:57 PM, Ted Koch <tkoch77@...> wrote:

> **
>
>
> Thanks Jose, I would appreciate that!
>
> ________________________________
> From: Jose Gomez <jose@...>
> To: vantage@yahoogroups.com
> Sent: Tuesday, May 15, 2012 1:10 PM
> Subject: Re: [Vantage] Re: BPM Warning with response
>
>
> You can do this fairly easy simply put a customization on the bpm data form
> which when you click the cancel button just closes the form then make sure
> that your action is tied to a value on the data form. If i have some time
> ill scribble something uo for you
> On May 15, 2012 12:54 PM, "pbparker" <scrumbus@...> wrote:
>
> > **
>
> >
> >
> > As it is now, any button has the same action as a "OK" button, in that it
> > moves forward.
> >
> > I talked to Tony Wilby (VP of R&D at Epicor) at Insights and told him
> what
> > they really needed was a baked in "OK" and "Cancel" that on the
> pre-process
> > would stop any progress towards the base method if the user clicked
> > "Cancel".
> >
> > He agreed - I said what would be perfect would be some way of kicking out
> > an exception that was silent to basically stop forward progress to the
> base
> > method and then return them to the current form.
> >
> > If there's some other way of easily accomplishing this, I'm not aware of
> > it.
> >
> > --- In vantage@yahoogroups.com, "tkoch77" <tkoch77@...> wrote:
> > >
> > > Mike,
> > >
> > > Any luck with this? I'm trying something similar as well...
> > >
> > > --- In vantage@yahoogroups.com, "mike.numbers" <mnumbers@> wrote:
> > > >
> > > > I have read a couple of threads that seem to address this, but I
> still
> > don't get it. Hopefully someone help me see the light.
> > > > Epicor 9.04.507a
> > > > I am trying to warn our user if he tries to issue material from one
> > warehouse to another warehouse. This may be valid so I need a BPM that
> > creates a warning when this happens and allows the user to stop or
> > continue. I have a condition that identifies when 2 warehouses are
> > involved. I have created a BPM data form with 2 buttons, ok and stop. My
> > question is how do I make this an action and then react to the user
> > response.
> > > >
> > >
> >
> >
> >
>
> [Non-text portions of this message have been removed]
>
> ------------------------------------
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note:Â You must
> have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>
> [Non-text portions of this message have been removed]
>
>Â
>

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note:Â You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.%c2%a0
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

[Non-text portions of this message have been removed]

system · May 15, 2012, 3:36pm

Nice work, first look at bpm forms..how useful

Rob Bucek
Production Control Manager
PH: (715) 284-5376 ext 311
Mobile: (715)896-0590
FAX: (715)284-4084

(Click the logo to view our site)

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Jose Gomez
Sent: Tuesday, May 15, 2012 1:35 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Re: BPM Warning with response

Here you go, don't have time to do a write up, if you have questions let me know

http://www.youtube.com/watch?v=zT4iZW1KeLc&feature=youtu.be

*Jose C Gomez*
*Software Engineer*
*
*
*checkout my new blog <http://www.usdoingstuff.com> *
*
*T: 904.469.1524 mobile
E: jose@...
http://www.josecgomez.com
<http://www.linkedin.com/in/josecgomez> <http://www.facebook.com/josegomez>
<http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
<http://www.josecgomez.com/professional-resume/>
<http://www.josecgomez.com/feed/>
<http://www.usdoingstuff.com>

*Quis custodiet ipsos custodes?*

On Tue, May 15, 2012 at 1:57 PM, Ted Koch <tkoch77@...> wrote:

> **
>
>
> Thanks Jose, I would appreciate that!
>
> ________________________________
> From: Jose Gomez <jose@...>
> To: vantage@yahoogroups.com
> Sent: Tuesday, May 15, 2012 1:10 PM
> Subject: Re: [Vantage] Re: BPM Warning with response
>
>
> You can do this fairly easy simply put a customization on the bpm data
> form which when you click the cancel button just closes the form then
> make sure that your action is tied to a value on the data form. If i
> have some time ill scribble something uo for you On May 15, 2012 12:54
> PM, "pbparker" <scrumbus@...> wrote:
>
> > **
>
> >
> >
> > As it is now, any button has the same action as a "OK" button, in
> > that it moves forward.
> >
> > I talked to Tony Wilby (VP of R&D at Epicor) at Insights and told
> > him
> what
> > they really needed was a baked in "OK" and "Cancel" that on the
> pre-process
> > would stop any progress towards the base method if the user clicked
> > "Cancel".
> >
> > He agreed - I said what would be perfect would be some way of
> > kicking out an exception that was silent to basically stop forward
> > progress to the
> base
> > method and then return them to the current form.
> >
> > If there's some other way of easily accomplishing this, I'm not
> > aware of it.
> >
> > --- In vantage@yahoogroups.com, "tkoch77" <tkoch77@...> wrote:
> > >
> > > Mike,
> > >
> > > Any luck with this? I'm trying something similar as well...
> > >
> > > --- In vantage@yahoogroups.com, "mike.numbers" <mnumbers@> wrote:
> > > >
> > > > I have read a couple of threads that seem to address this, but I
> still
> > don't get it. Hopefully someone help me see the light.
> > > > Epicor 9.04.507a
> > > > I am trying to warn our user if he tries to issue material from
> > > > one
> > warehouse to another warehouse. This may be valid so I need a BPM
> > that creates a warning when this happens and allows the user to stop
> > or continue. I have a condition that identifies when 2 warehouses
> > are involved. I have created a BPM data form with 2 buttons, ok and
> > stop. My question is how do I make this an action and then react to
> > the user response.
> > > >
> > >
> >
> >
> >
>
> [Non-text portions of this message have been removed]
>
> ------------------------------------
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access.
> )
> (1) To access the Files Section of our Yahoo!Group for Report Builder
> and Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>
> [Non-text portions of this message have been removed]
>
>
>

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

system · May 15, 2012, 3:39pm

Jose:
Thanks for that example. It's always great to have a visual when you are just starting out.
Really appreciate it.

Sylvia

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Jose Gomez
Sent: Tuesday, May 15, 2012 2:35 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Re: BPM Warning with response

Here you go, don't have time to do a write up, if you have questions let me know

http://www.youtube.com/watch?v=zT4iZW1KeLc&feature=youtu.be

*Jose C Gomez*
*Software Engineer*
*
*
*checkout my new blog <http://www.usdoingstuff.com> *
*
*T: 904.469.1524 mobile
E: jose@...
http://www.josecgomez.com
<http://www.linkedin.com/in/josecgomez> <http://www.facebook.com/josegomez>
<http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
<http://www.josecgomez.com/professional-resume/>
<http://www.josecgomez.com/feed/>
<http://www.usdoingstuff.com>

*Quis custodiet ipsos custodes?*

On Tue, May 15, 2012 at 1:57 PM, Ted Koch <tkoch77@...> wrote:

> **
>
>
> Thanks Jose, I would appreciate that!
>
> ________________________________
> From: Jose Gomez <jose@...>
> To: vantage@yahoogroups.com
> Sent: Tuesday, May 15, 2012 1:10 PM
> Subject: Re: [Vantage] Re: BPM Warning with response
>
>
> You can do this fairly easy simply put a customization on the bpm data
> form which when you click the cancel button just closes the form then
> make sure that your action is tied to a value on the data form. If i
> have some time ill scribble something uo for you On May 15, 2012 12:54
> PM, "pbparker" <scrumbus@...> wrote:
>
> > **
>
> >
> >
> > As it is now, any button has the same action as a "OK" button, in
> > that it moves forward.
> >
> > I talked to Tony Wilby (VP of R&D at Epicor) at Insights and told
> > him
> what
> > they really needed was a baked in "OK" and "Cancel" that on the
> pre-process
> > would stop any progress towards the base method if the user clicked
> > "Cancel".
> >
> > He agreed - I said what would be perfect would be some way of
> > kicking out an exception that was silent to basically stop forward
> > progress to the
> base
> > method and then return them to the current form.
> >
> > If there's some other way of easily accomplishing this, I'm not
> > aware of it.
> >
> > --- In vantage@yahoogroups.com, "tkoch77" <tkoch77@...> wrote:
> > >
> > > Mike,
> > >
> > > Any luck with this? I'm trying something similar as well...
> > >
> > > --- In vantage@yahoogroups.com, "mike.numbers" <mnumbers@> wrote:
> > > >
> > > > I have read a couple of threads that seem to address this, but I
> still
> > don't get it. Hopefully someone help me see the light.
> > > > Epicor 9.04.507a
> > > > I am trying to warn our user if he tries to issue material from
> > > > one
> > warehouse to another warehouse. This may be valid so I need a BPM
> > that creates a warning when this happens and allows the user to stop
> > or continue. I have a condition that identifies when 2 warehouses
> > are involved. I have created a BPM data form with 2 buttons, ok and
> > stop. My question is how do I make this an action and then react to
> > the user response.
> > > >
> > >
> >
> >
> >
>
> [Non-text portions of this message have been removed]
>
> ------------------------------------
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access.
> )
> (1) To access the Files Section of our Yahoo!Group for Report Builder
> and Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>
> [Non-text portions of this message have been removed]
>
>
>

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

system · May 15, 2012, 3:54pm

Hello,

I am wondering if anyone has created a BPM to prevent BOM changes if the
user is in one plant but the Part Rev belongs to another. We have two
plants and sometimes users modify the BOMs which belong to the other
plant.

Mike Tonoyan / Natel EMS

mtonoyan@...

______________________________________________________________________
Notice: This email transmission may contain confidential information and is intended only for the person(s) named. Any use, copying or disclosure to/by any other person(s) is strictly prohibited. By accepting this information, recipients confirm that they understand and will comply with all applicable ITAR and EAR requirements.
______________________________________________________________________

[Non-text portions of this message have been removed]

system · May 15, 2012, 3:56pm

Thanks for sharing Jose!

--- In vantage@yahoogroups.com, Jose Gomez <jose@...> wrote:
>
> Here you go, don't have time to do a write up, if you have questions let me
> know
>
> http://www.youtube.com/watch?v=zT4iZW1KeLc&feature=youtu.be
>
>
>
> *Jose C Gomez*
> *Software Engineer*
> *
> *
> *checkout my new blog <http://www.usdoingstuff.com> *
> *
> *T: 904.469.1524 mobile
> E: jose@...
> http://www.josecgomez.com
> <http://www.linkedin.com/in/josecgomez> <http://www.facebook.com/josegomez>
> <http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
> <http://www.josecgomez.com/professional-resume/>
> <http://www.josecgomez.com/feed/>
> <http://www.usdoingstuff.com>
>
> *Quis custodiet ipsos custodes?*
>
>
>
> On Tue, May 15, 2012 at 1:57 PM, Ted Koch <tkoch77@...> wrote:
>
> > **
> >
> >
> > Thanks Jose, I would appreciate that!
> >
> > ________________________________
> > From: Jose Gomez <jose@...>
> > To: vantage@yahoogroups.com
> > Sent: Tuesday, May 15, 2012 1:10 PM
> > Subject: Re: [Vantage] Re: BPM Warning with response
> >
> >
> > You can do this fairly easy simply put a customization on the bpm data form
> > which when you click the cancel button just closes the form then make sure
> > that your action is tied to a value on the data form. If i have some time
> > ill scribble something uo for you
> > On May 15, 2012 12:54 PM, "pbparker" <scrumbus@...> wrote:
> >
> > > **
> >
> > >
> > >
> > > As it is now, any button has the same action as a "OK" button, in that it
> > > moves forward.
> > >
> > > I talked to Tony Wilby (VP of R&D at Epicor) at Insights and told him
> > what
> > > they really needed was a baked in "OK" and "Cancel" that on the
> > pre-process
> > > would stop any progress towards the base method if the user clicked
> > > "Cancel".
> > >
> > > He agreed - I said what would be perfect would be some way of kicking out
> > > an exception that was silent to basically stop forward progress to the
> > base
> > > method and then return them to the current form.
> > >
> > > If there's some other way of easily accomplishing this, I'm not aware of
> > > it.
> > >
> > > --- In vantage@yahoogroups.com, "tkoch77" <tkoch77@> wrote:
> > > >
> > > > Mike,
> > > >
> > > > Any luck with this? I'm trying something similar as well...
> > > >
> > > > --- In vantage@yahoogroups.com, "mike.numbers" <mnumbers@> wrote:
> > > > >
> > > > > I have read a couple of threads that seem to address this, but I
> > still
> > > don't get it. Hopefully someone help me see the light.
> > > > > Epicor 9.04.507a
> > > > > I am trying to warn our user if he tries to issue material from one
> > > warehouse to another warehouse. This may be valid so I need a BPM that
> > > creates a warning when this happens and allows the user to stop or
> > > continue. I have a condition that identifies when 2 warehouses are
> > > involved. I have created a BPM data form with 2 buttons, ok and stop. My
> > > question is how do I make this an action and then react to the user
> > > response.
> > > > >
> > > >
> > >
> > >
> > >
> >
> > [Non-text portions of this message have been removed]
> >
> > ------------------------------------
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> > have already linked your email address to a yahoo id to enable access. )
> > (1) To access the Files Section of our Yahoo!Group for Report Builder and
> > Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> > http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
>

system · May 16, 2012, 8:06am

Thanks Jose. That explains it perfectly. You should write a tech book. I
am sure you would get a lot of readers.

Mike

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Jose Gomez
Sent: Tuesday, May 15, 2012 2:35 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Re: BPM Warning with response

Here you go, don't have time to do a write up, if you have questions let me
know

http://www.youtube.com/watch?v=zT4iZW1KeLc&feature=youtu.be

*Jose C Gomez*
*Software Engineer*
*
*
*checkout my new blog <http://www.usdoingstuff.com> *
*
*T: 904.469.1524 mobile
E: jose@...
http://www.josecgomez.com
<http://www.linkedin.com/in/josecgomez> <http://www.facebook.com/josegomez>
<http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
<http://www.josecgomez.com/professional-resume/>
<http://www.josecgomez.com/feed/>
<http://www.usdoingstuff.com>

*Quis custodiet ipsos custodes?*

On Tue, May 15, 2012 at 1:57 PM, Ted Koch <tkoch77@...> wrote:

> **
>
>
> Thanks Jose, I would appreciate that!
>
> ________________________________
> From: Jose Gomez <jose@...>
> To: vantage@yahoogroups.com
> Sent: Tuesday, May 15, 2012 1:10 PM
> Subject: Re: [Vantage] Re: BPM Warning with response
>
>
> You can do this fairly easy simply put a customization on the bpm data
> form which when you click the cancel button just closes the form then
> make sure that your action is tied to a value on the data form. If i
> have some time ill scribble something uo for you On May 15, 2012 12:54
> PM, "pbparker" <scrumbus@...> wrote:
>
> > **
>
> >
> >
> > As it is now, any button has the same action as a "OK" button, in
> > that it moves forward.
> >
> > I talked to Tony Wilby (VP of R&D at Epicor) at Insights and told
> > him
> what
> > they really needed was a baked in "OK" and "Cancel" that on the
> pre-process
> > would stop any progress towards the base method if the user clicked
> > "Cancel".
> >
> > He agreed - I said what would be perfect would be some way of
> > kicking out an exception that was silent to basically stop forward
> > progress to the
> base
> > method and then return them to the current form.
> >
> > If there's some other way of easily accomplishing this, I'm not
> > aware of it.
> >
> > --- In vantage@yahoogroups.com, "tkoch77" <tkoch77@...> wrote:
> > >
> > > Mike,
> > >
> > > Any luck with this? I'm trying something similar as well...
> > >
> > > --- In vantage@yahoogroups.com, "mike.numbers" <mnumbers@> wrote:
> > > >
> > > > I have read a couple of threads that seem to address this, but I
> still
> > don't get it. Hopefully someone help me see the light.
> > > > Epicor 9.04.507a
> > > > I am trying to warn our user if he tries to issue material from
> > > > one
> > warehouse to another warehouse. This may be valid so I need a BPM
> > that creates a warning when this happens and allows the user to stop
> > or continue. I have a condition that identifies when 2 warehouses
> > are involved. I have created a BPM data form with 2 buttons, ok and
> > stop. My question is how do I make this an action and then react to
> > the user response.
> > > >
> > >
> >
> >
> >
>
> [Non-text portions of this message have been removed]
>
> ------------------------------------
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access.
> )
> (1) To access the Files Section of our Yahoo!Group for Report Builder
> and Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>
> [Non-text portions of this message have been removed]
>
>
>

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

system · May 16, 2012, 8:55am

Jose,

When I try to validate the ABL Action, I get an error message ** Unable to
understand after -- "(". (247)
** Invalid statement. (254). I think this is referencing the
(lib\PublishInfoMsg.i ...... statement. What can I do to fix this?

Thanks again for your help.

Mike

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Jose Gomez
Sent: Tuesday, May 15, 2012 2:35 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Re: BPM Warning with response

Here you go, don't have time to do a write up, if you have questions let me
know

http://www.youtube.com/watch?v=zT4iZW1KeLc&feature=youtu.be

*Jose C Gomez*
*Software Engineer*
*
*
*checkout my new blog <http://www.usdoingstuff.com> *
*
*T: 904.469.1524 mobile
E: jose@...
http://www.josecgomez.com
<http://www.linkedin.com/in/josecgomez> <http://www.facebook.com/josegomez>
<http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
<http://www.josecgomez.com/professional-resume/>
<http://www.josecgomez.com/feed/>
<http://www.usdoingstuff.com>

*Quis custodiet ipsos custodes?*

On Tue, May 15, 2012 at 1:57 PM, Ted Koch <tkoch77@...> wrote:

> **
>
>
> Thanks Jose, I would appreciate that!
>
> ________________________________
> From: Jose Gomez <jose@...>
> To: vantage@yahoogroups.com
> Sent: Tuesday, May 15, 2012 1:10 PM
> Subject: Re: [Vantage] Re: BPM Warning with response
>
>
> You can do this fairly easy simply put a customization on the bpm data
> form which when you click the cancel button just closes the form then
> make sure that your action is tied to a value on the data form. If i
> have some time ill scribble something uo for you On May 15, 2012 12:54
> PM, "pbparker" <scrumbus@...> wrote:
>
> > **
>
> >
> >
> > As it is now, any button has the same action as a "OK" button, in
> > that it moves forward.
> >
> > I talked to Tony Wilby (VP of R&D at Epicor) at Insights and told
> > him
> what
> > they really needed was a baked in "OK" and "Cancel" that on the
> pre-process
> > would stop any progress towards the base method if the user clicked
> > "Cancel".
> >
> > He agreed - I said what would be perfect would be some way of
> > kicking out an exception that was silent to basically stop forward
> > progress to the
> base
> > method and then return them to the current form.
> >
> > If there's some other way of easily accomplishing this, I'm not
> > aware of it.
> >
> > --- In vantage@yahoogroups.com, "tkoch77" <tkoch77@...> wrote:
> > >
> > > Mike,
> > >
> > > Any luck with this? I'm trying something similar as well...
> > >
> > > --- In vantage@yahoogroups.com, "mike.numbers" <mnumbers@> wrote:
> > > >
> > > > I have read a couple of threads that seem to address this, but I
> still
> > don't get it. Hopefully someone help me see the light.
> > > > Epicor 9.04.507a
> > > > I am trying to warn our user if he tries to issue material from
> > > > one
> > warehouse to another warehouse. This may be valid so I need a BPM
> > that creates a warning when this happens and allows the user to stop
> > or continue. I have a condition that identifies when 2 warehouses
> > are involved. I have created a BPM data form with 2 buttons, ok and
> > stop. My question is how do I make this an action and then react to
> > the user response.
> > > >
> > >
> >
> >
> >
>
> [Non-text portions of this message have been removed]
>
> ------------------------------------
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access.
> )
> (1) To access the Files Section of our Yahoo!Group for Report Builder
> and Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>
> [Non-text portions of this message have been removed]
>
>
>

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links

system · May 16, 2012, 9:04am

Did you copy it word by word, maybe you misspelled something. Paste your
code here

*Jose C Gomez*
*Software Engineer*
*
*
*checkout my new blog <http://www.usdoingstuff.com> *
*
*T: 904.469.1524 mobile
E: jose@...
http://www.josecgomez.com
<http://www.linkedin.com/in/josecgomez> <http://www.facebook.com/josegomez>
<http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
<http://www.josecgomez.com/professional-resume/>
<http://www.josecgomez.com/feed/>
<http://www.usdoingstuff.com>

*Quis custodiet ipsos custodes?*

On Wed, May 16, 2012 at 8:55 AM, Mike Numbers <mnumbers@...> wrote:

> **
>
>
> Jose,
>
> When I try to validate the ABL Action, I get an error message ** Unable to
> understand after -- "(". (247)
> ** Invalid statement. (254). I think this is referencing the
> (lib\PublishInfoMsg.i ...... statement. What can I do to fix this?
>
> Thanks again for your help.
>
>
> Mike
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
> Of
> Jose Gomez
> Sent: Tuesday, May 15, 2012 2:35 PM
> To: vantage@yahoogroups.com
> Subject: Re: [Vantage] Re: BPM Warning with response
>
> Here you go, don't have time to do a write up, if you have questions let me
> know
>
> http://www.youtube.com/watch?v=zT4iZW1KeLc&feature=youtu.be
>
> *Jose C Gomez*
> *Software Engineer*
> *
> *
> *checkout my new blog <http://www.usdoingstuff.com> *
> *
> *T: 904.469.1524 mobile
> E: jose@...
> http://www.josecgomez.com
>
> <http://www.linkedin.com/in/josecgomez> <http://www.facebook.com/josegomez
> >
> <http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
> <http://www.josecgomez.com/professional-resume/>
> <http://www.josecgomez.com/feed/>
> <http://www.usdoingstuff.com>
>
> *Quis custodiet ipsos custodes?*
>
> On Tue, May 15, 2012 at 1:57 PM, Ted Koch <tkoch77@...> wrote:
>
> > **
>
> >
> >
> > Thanks Jose, I would appreciate that!
> >
> > ________________________________
> > From: Jose Gomez <jose@...>
> > To: vantage@yahoogroups.com
> > Sent: Tuesday, May 15, 2012 1:10 PM
> > Subject: Re: [Vantage] Re: BPM Warning with response
> >
> >
> > You can do this fairly easy simply put a customization on the bpm data
> > form which when you click the cancel button just closes the form then
> > make sure that your action is tied to a value on the data form. If i
> > have some time ill scribble something uo for you On May 15, 2012 12:54
> > PM, "pbparker" <scrumbus@...> wrote:
> >
> > > **
> >
> > >
> > >
> > > As it is now, any button has the same action as a "OK" button, in
> > > that it moves forward.
> > >
> > > I talked to Tony Wilby (VP of R&D at Epicor) at Insights and told
> > > him
> > what
> > > they really needed was a baked in "OK" and "Cancel" that on the
> > pre-process
> > > would stop any progress towards the base method if the user clicked
> > > "Cancel".
> > >
> > > He agreed - I said what would be perfect would be some way of
> > > kicking out an exception that was silent to basically stop forward
> > > progress to the
> > base
> > > method and then return them to the current form.
> > >
> > > If there's some other way of easily accomplishing this, I'm not
> > > aware of it.
> > >
> > > --- In vantage@yahoogroups.com, "tkoch77" <tkoch77@...> wrote:
> > > >
> > > > Mike,
> > > >
> > > > Any luck with this? I'm trying something similar as well...
> > > >
> > > > --- In vantage@yahoogroups.com, "mike.numbers" <mnumbers@> wrote:
> > > > >
> > > > > I have read a couple of threads that seem to address this, but I
> > still
> > > don't get it. Hopefully someone help me see the light.
> > > > > Epicor 9.04.507a
> > > > > I am trying to warn our user if he tries to issue material from
> > > > > one
> > > warehouse to another warehouse. This may be valid so I need a BPM
> > > that creates a warning when this happens and allows the user to stop
> > > or continue. I have a condition that identifies when 2 warehouses
> > > are involved. I have created a BPM data form with 2 buttons, ok and
> > > stop. My question is how do I make this an action and then react to
> > > the user response.
> > > > >
> > > >
> > >
> > >
> > >
> >
> > [Non-text portions of this message have been removed]
> >
> > ------------------------------------
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> > have already linked your email address to a yahoo id to enable access.
> > )
> > (1) To access the Files Section of our Yahoo!Group for Report Builder
> > and Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> > http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
>
> [Non-text portions of this message have been removed]
>
> ------------------------------------
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>
>
>

[Non-text portions of this message have been removed]

system · May 16, 2012, 9:08am

Curly braces instead of parens around {lib\PublishInfoMsg.i.....

--- In vantage@yahoogroups.com, "Mike Numbers" <mnumbers@...> wrote:
>
> Jose,
>
> When I try to validate the ABL Action, I get an error message ** Unable to
> understand after -- "(". (247)
> ** Invalid statement. (254). I think this is referencing the
> (lib\PublishInfoMsg.i ...... statement. What can I do to fix this?
>
> Thanks again for your help.
>
> Mike
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
> Jose Gomez
> Sent: Tuesday, May 15, 2012 2:35 PM
> To: vantage@yahoogroups.com
> Subject: Re: [Vantage] Re: BPM Warning with response
>
> Here you go, don't have time to do a write up, if you have questions let me
> know
>
> http://www.youtube.com/watch?v=zT4iZW1KeLc&feature=youtu.be
>
>
>
> *Jose C Gomez*
> *Software Engineer*
> *
> *
> *checkout my new blog <http://www.usdoingstuff.com> *
> *
> *T: 904.469.1524 mobile
> E: jose@...
> http://www.josecgomez.com
> <http://www.linkedin.com/in/josecgomez> <http://www.facebook.com/josegomez>
> <http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
> <http://www.josecgomez.com/professional-resume/>
> <http://www.josecgomez.com/feed/>
> <http://www.usdoingstuff.com>
>
> *Quis custodiet ipsos custodes?*
>
>
>
> On Tue, May 15, 2012 at 1:57 PM, Ted Koch <tkoch77@...> wrote:
>
> > **
> >
> >
> > Thanks Jose, I would appreciate that!
> >
> > ________________________________
> > From: Jose Gomez <jose@...>
> > To: vantage@yahoogroups.com
> > Sent: Tuesday, May 15, 2012 1:10 PM
> > Subject: Re: [Vantage] Re: BPM Warning with response
> >
> >
> > You can do this fairly easy simply put a customization on the bpm data
> > form which when you click the cancel button just closes the form then
> > make sure that your action is tied to a value on the data form. If i
> > have some time ill scribble something uo for you On May 15, 2012 12:54
> > PM, "pbparker" <scrumbus@...> wrote:
> >
> > > **
> >
> > >
> > >
> > > As it is now, any button has the same action as a "OK" button, in
> > > that it moves forward.
> > >
> > > I talked to Tony Wilby (VP of R&D at Epicor) at Insights and told
> > > him
> > what
> > > they really needed was a baked in "OK" and "Cancel" that on the
> > pre-process
> > > would stop any progress towards the base method if the user clicked
> > > "Cancel".
> > >
> > > He agreed - I said what would be perfect would be some way of
> > > kicking out an exception that was silent to basically stop forward
> > > progress to the
> > base
> > > method and then return them to the current form.
> > >
> > > If there's some other way of easily accomplishing this, I'm not
> > > aware of it.
> > >
> > > --- In vantage@yahoogroups.com, "tkoch77" <tkoch77@> wrote:
> > > >
> > > > Mike,
> > > >
> > > > Any luck with this? I'm trying something similar as well...
> > > >
> > > > --- In vantage@yahoogroups.com, "mike.numbers" <mnumbers@> wrote:
> > > > >
> > > > > I have read a couple of threads that seem to address this, but I
> > still
> > > don't get it. Hopefully someone help me see the light.
> > > > > Epicor 9.04.507a
> > > > > I am trying to warn our user if he tries to issue material from
> > > > > one
> > > warehouse to another warehouse. This may be valid so I need a BPM
> > > that creates a warning when this happens and allows the user to stop
> > > or continue. I have a condition that identifies when 2 warehouses
> > > are involved. I have created a BPM data form with 2 buttons, ok and
> > > stop. My question is how do I make this an action and then react to
> > > the user response.
> > > > >
> > > >
> > >
> > >
> > >
> >
> > [Non-text portions of this message have been removed]
> >
> > ------------------------------------
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> > have already linked your email address to a yahoo id to enable access.
> > )
> > (1) To access the Files Section of our Yahoo!Group for Report Builder
> > and Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> > http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
> already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>

system · May 16, 2012, 9:27am

Here it is:

FOR EACH ttCallContextBpmData:
If ttCallContextBpmData.ButtonValue=1111 /* Yes Button*/ Then DO:
(lib\PublishInfoMsg.i &InfoMsg = "'You pushed Yes,
Continue'").
END.
else.
(lib\PublishEx.i &exMsg = "'You pushed No, Cancel'").
END.

Mike

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Jose Gomez
Sent: Wednesday, May 16, 2012 9:04 AM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Re: BPM Warning with response

Did you copy it word by word, maybe you misspelled something. Paste your
code here

*Jose C Gomez*
*Software Engineer*
*
*
*checkout my new blog <http://www.usdoingstuff.com> *
*
*T: 904.469.1524 mobile
E: jose@...
http://www.josecgomez.com
<http://www.linkedin.com/in/josecgomez> <http://www.facebook.com/josegomez>
<http://www.google.com/profiles/jose.gomez> <http://www.twitter.com/joc85>
<http://www.josecgomez.com/professional-resume/>
<http://www.josecgomez.com/feed/>
<http://www.usdoingstuff.com>

*Quis custodiet ipsos custodes?*

On Wed, May 16, 2012 at 8:55 AM, Mike Numbers <mnumbers@...> wrote:

> **
>
>
> Jose,
>
> When I try to validate the ABL Action, I get an error message **
> Unable to understand after -- "(". (247)
> ** Invalid statement. (254). I think this is referencing the
> (lib\PublishInfoMsg.i ...... statement. What can I do to fix this?
>
> Thanks again for your help.
>
>
> Mike
>
> -----Original Message-----
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
> Behalf Of Jose Gomez
> Sent: Tuesday, May 15, 2012 2:35 PM
> To: vantage@yahoogroups.com
> Subject: Re: [Vantage] Re: BPM Warning with response
>
> Here you go, don't have time to do a write up, if you have questions
> let me know
>
> http://www.youtube.com/watch?v=zT4iZW1KeLc&feature=youtu.be
>
> *Jose C Gomez*
> *Software Engineer*
> *
> *
> *checkout my new blog <http://www.usdoingstuff.com> *
> *
> *T: 904.469.1524 mobile
> E: jose@...
> http://www.josecgomez.com
>
> <http://www.linkedin.com/in/josecgomez>
> <http://www.facebook.com/josegomez
> >
> <http://www.google.com/profiles/jose.gomez>
> <http://www.twitter.com/joc85>
> <http://www.josecgomez.com/professional-resume/>
> <http://www.josecgomez.com/feed/>
> <http://www.usdoingstuff.com>
>
> *Quis custodiet ipsos custodes?*
>
> On Tue, May 15, 2012 at 1:57 PM, Ted Koch <tkoch77@...> wrote:
>
> > **
>
> >
> >
> > Thanks Jose, I would appreciate that!
> >
> > ________________________________
> > From: Jose Gomez <jose@...>
> > To: vantage@yahoogroups.com
> > Sent: Tuesday, May 15, 2012 1:10 PM
> > Subject: Re: [Vantage] Re: BPM Warning with response
> >
> >
> > You can do this fairly easy simply put a customization on the bpm
> > data form which when you click the cancel button just closes the
> > form then make sure that your action is tied to a value on the data
> > form. If i have some time ill scribble something uo for you On May
> > 15, 2012 12:54 PM, "pbparker" <scrumbus@...> wrote:
> >
> > > **
> >
> > >
> > >
> > > As it is now, any button has the same action as a "OK" button, in
> > > that it moves forward.
> > >
> > > I talked to Tony Wilby (VP of R&D at Epicor) at Insights and told
> > > him
> > what
> > > they really needed was a baked in "OK" and "Cancel" that on the
> > pre-process
> > > would stop any progress towards the base method if the user
> > > clicked "Cancel".
> > >
> > > He agreed - I said what would be perfect would be some way of
> > > kicking out an exception that was silent to basically stop forward
> > > progress to the
> > base
> > > method and then return them to the current form.
> > >
> > > If there's some other way of easily accomplishing this, I'm not
> > > aware of it.
> > >
> > > --- In vantage@yahoogroups.com, "tkoch77" <tkoch77@...> wrote:
> > > >
> > > > Mike,
> > > >
> > > > Any luck with this? I'm trying something similar as well...
> > > >
> > > > --- In vantage@yahoogroups.com, "mike.numbers" <mnumbers@> wrote:
> > > > >
> > > > > I have read a couple of threads that seem to address this, but
> > > > > I
> > still
> > > don't get it. Hopefully someone help me see the light.
> > > > > Epicor 9.04.507a
> > > > > I am trying to warn our user if he tries to issue material
> > > > > from one
> > > warehouse to another warehouse. This may be valid so I need a BPM
> > > that creates a warning when this happens and allows the user to
> > > stop or continue. I have a condition that identifies when 2
> > > warehouses are involved. I have created a BPM data form with 2
> > > buttons, ok and stop. My question is how do I make this an action
> > > and then react to the user response.
> > > > >
> > > >
> > >
> > >
> > >
> >
> > [Non-text portions of this message have been removed]
> >
> > ------------------------------------
> >
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
> > must have already linked your email address to a yahoo id to enable
access.
> > )
> > (1) To access the Files Section of our Yahoo!Group for Report
> > Builder and Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> > http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
>
> [Non-text portions of this message have been removed]
>
> ------------------------------------
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access.
> )
> (1) To access the Files Section of our Yahoo!Group for Report Builder
> and Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>
>
>

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links