Cost Roll Up Ver 6.1

Yahoo Archive
1
We monthly run cost-roll up.
We have no problems with it.

We use Standard cost method.
On 6.1

We do wish that purchase last-cost would roll into standard-cost

_________________________________________________
Babette Welch
IT Director
Argonics, Inc
1110 Wright Street
Marquette MI 49855
906.226.9747 ext 235
906.228.0951




[Non-text portions of this message have been removed]
2
HELP

Anyone experiencing problems with Vantage doing a Cost Roll Up? We are on
6.1.517 and have BOMs that run 7-10 levels deep and while some of our
subassemblies have costs rolling up correctly, the finished parts are not.
This isn't
just some of our finished parts but rather ALL OF THEM.

The part tracker rolls up the cost correctly for the revision and the BOM
Cost
report displays the correct costs however Cost Roll Up displays all zeros.

All cost groups have been deleted (even some that we posted- still
questioning
that feature!!) thinking that we can't have more than one cost group open
at a time.

We've tried multiple postings thinking the subassembly costs need to be
posted
before the Roll Up will include them into the finished goods however that
didn't
work either.

We have verified Costing Lot Sizes are set correctly, Revisions are approved
and
all the sub-component revisions are approved. All the purchased parts have
correct
costs, and the work center/operations have costs.

Anyone see something we're missing here - all suggestions are welcome.

Thanks,
Calvin

[Non-text portions of this message have been removed]
3
We're on 518 and I've been doing most of the cost roll-ups but have not
had any problems that couldn't be explained. When I have a BOM that
doesn't roll, I have found that the part is either unapproved, checked
out to the Engineering Workbench (approved or not), user added a rev but
didn't do a get details to pull the BOM in, etc.

Butch

________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Calvin Dekker
Sent: Tuesday, May 16, 2006 8:31 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Cost Roll Up Ver 6.1


HELP

Anyone experiencing problems with Vantage doing a Cost Roll Up? We are
on
6.1.517 and have BOMs that run 7-10 levels deep and while some of our
subassemblies have costs rolling up correctly, the finished parts are
not.
This isn't
just some of our finished parts but rather ALL OF THEM.

The part tracker rolls up the cost correctly for the revision and the
BOM
Cost
report displays the correct costs however Cost Roll Up displays all
zeros.

All cost groups have been deleted (even some that we posted- still
questioning
that feature!!) thinking that we can't have more than one cost group
open
at a time.

We've tried multiple postings thinking the subassembly costs need to be
posted
before the Roll Up will include them into the finished goods however
that
didn't
work either.

We have verified Costing Lot Sizes are set correctly, Revisions are
approved
and
all the sub-component revisions are approved. All the purchased parts
have
correct
costs, and the work center/operations have costs.

Anyone see something we're missing here - all suggestions are welcome.

Thanks,
Calvin

[Non-text portions of this message have been removed]



Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links



________________________________

YAHOO! GROUPS LINKS



* Visit your group "vantage
<http://groups.yahoo.com/group/vantage> " on the web.

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .


________________________________




[Non-text portions of this message have been removed]
4
Along with Butch's suggestions, don't forget to check effectivity
dates on BOM. An accidental future date will have the same impact
as an unapproved revision.

Michael Randolph
Infinity Business Consulting


--- In vantage@yahoogroups.com, "Butch Menge" <bmenge@...> wrote:
>
> We're on 518 and I've been doing most of the cost roll-ups but
have not
> had any problems that couldn't be explained. When I have a BOM
that
> doesn't roll, I have found that the part is either unapproved,
checked
> out to the Engineering Workbench (approved or not), user added a
rev but
> didn't do a get details to pull the BOM in, etc.
>
> Butch
>
> ________________________________
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
Behalf
> Of Calvin Dekker
> Sent: Tuesday, May 16, 2006 8:31 PM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Cost Roll Up Ver 6.1
>
>
> HELP
>
> Anyone experiencing problems with Vantage doing a Cost Roll Up?
We are
> on
> 6.1.517 and have BOMs that run 7-10 levels deep and while some of
our
> subassemblies have costs rolling up correctly, the finished parts
are
> not.
> This isn't
> just some of our finished parts but rather ALL OF THEM.
>
> The part tracker rolls up the cost correctly for the revision and
the
> BOM
> Cost
> report displays the correct costs however Cost Roll Up displays all
> zeros.
>
> All cost groups have been deleted (even some that we posted- still
> questioning
> that feature!!) thinking that we can't have more than one cost
group
> open
> at a time.
>
> We've tried multiple postings thinking the subassembly costs need
to be
> posted
> before the Roll Up will include them into the finished goods
however
> that
> didn't
> work either.
>
> We have verified Costing Lot Sizes are set correctly, Revisions are
> approved
> and
> all the sub-component revisions are approved. All the purchased
parts
> have
> correct
> costs, and the work center/operations have costs.
>
> Anyone see something we're missing here - all suggestions are
welcome.
>
> Thanks,
> Calvin
>
> [Non-text portions of this message have been removed]
>
>
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You
must
> have already linked your email address to a yahoo id to enable
access. )
> (1) To access the Files Section of our Yahoo!Group for Report
Builder
> and Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/links
>
>
>
> ________________________________
>
> YAHOO! GROUPS LINKS
>
>
>
> * Visit your group "vantage
> <http://groups.yahoo.com/group/vantage> " on the web.
>
> * To unsubscribe from this group, send an email to:
> vantage-unsubscribe@yahoogroups.com
> <mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service <http://docs.yahoo.com/info/terms/> .
>
>
> ________________________________
>
>
>
>
> [Non-text portions of this message have been removed]
>