Crystal error

system · December 8, 2005, 4:21pm

Thanks I will try it.

Frank Zeigafuse
Innovative Office Products
General Manager
Direct Phone: 610-559-6369
Email: fzeigafuse@...

Visit www.one.org to see how the world can be changed one person at a time.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
RICH WAGNER
Sent: Thursday, December 08, 2005 4:11 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Crystal error

I got mine to work by using the -SQLTempDisk 2000000 parameter in Progress
Explorer.

RIch

_____

From: Bob Booth [mailto:bbooth@...]
Sent: Thursday, December 08, 2005 3:30 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Crystal error

You have do to make the change on the database server and then reboot the
database server

Mine is set to :

tpe_mm_swapsize

2000000

I had a crystal reportthat would not run... made the change - rebooted and
it is working fine now

bob

_____

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Frank Zeigafuse
Sent: Monday, December 05, 2005 5:35 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Crystal error

I have received the error but never corrected it, if you do please let us
know

Frank Zeigafuse
Innovative Office Products
General Manager
Direct Phone: 610-559-6369
Email: fzeigafuse@...

Visit www.one.org to see how the world can be changed one person at a time.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
RICH WAGNER
Sent: Monday, December 05, 2005 5:24 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Crystal error

Has anyone ever had the following error using Crystal.

ODBC error: [DataDirect-Technologies][ODBC PROGRESS driver][PROGRESS]Unable
to allocate disk block for temp table use [MM - No data block] (7631)

Epicor Answer Book had an article that told me the set a Windows variable
for TPE_MM_SWAPSIZE=1000000 but that did not work.

Any suggestions

Thanks,

Rich Wagner

BAW Plastics

Phone: (412)384-3100

E-Mail: rwagner@...

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

_____

YAHOO! GROUPS LINKS

* Visit your group "vantage
<http://groups.yahoo.com/group/vantage> " on the web.

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .

_____

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

SPONSORED LINKS

Manufacturing software
<http://groups.yahoo.com/gads?t=ms&k=Manufacturing+software&w1=Manufactu
ring+software&w2=Membership+database+software&w3=Database+mortgage+softw
are&w4=Pda+database+software&w5=Database+management+software&w6=Database
+marketing+software&c=6&s=188&.sig=OG5F3819UOUOg63i0bu6kA>

Membership database software
<http://groups.yahoo.com/gads?t=ms&k=Membership+database+software&w1=Man
ufacturing+software&w2=Membership+database+software&w3=Database+mortgage
+software&w4=Pda+database+software&w5=Database+management+software&w6=Da
tabase+marketing+software&c=6&s=188&.sig=N5BGdur84p-jyuOomcQdbQ>

Database mortgage software
<http://groups.yahoo.com/gads?t=ms&k=Database+mortgage+software&w1=Manuf
acturing+software&w2=Membership+database+software&w3=Database+mortgage+s
oftware&w4=Pda+database+software&w5=Database+management+software&w6=Data
base+marketing+software&c=6&s=188&.sig=8rvcSQnCqJhTCZu-0Si39A>

Pda database software
<http://groups.yahoo.com/gads?t=ms&k=Pda+database+software&w1=Manufactur
ing+software&w2=Membership+database+software&w3=Database+mortgage+softwa
re&w4=Pda+database+software&w5=Database+management+software&w6=Database+
marketing+software&c=6&s=188&.sig=u3KQrTRPAQfsWIT39aHDkg>

Database management software
<http://groups.yahoo.com/gads?t=ms&k=Database+management+software&w1=Man
ufacturing+software&w2=Membership+database+software&w3=Database+mortgage
+software&w4=Pda+database+software&w5=Database+management+software&w6=Da
tabase+marketing+software&c=6&s=188&.sig=R3CF3ODPY4gwjDZjykQYvw>

Database marketing software
<http://groups.yahoo.com/gads?t=ms&k=Database+marketing+software&w1=Manu
facturing+software&w2=Membership+database+software&w3=Database+mortgage+
software&w4=Pda+database+software&w5=Database+management+software&w6=Dat
abase+marketing+software&c=6&s=188&.sig=lmBkRUiBtvHI1u5dkymDcw>

_____

YAHOO! GROUPS LINKS

* Visit your group "vantage
<http://groups.yahoo.com/group/vantage> " on the web.

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .

_____

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links

system · September 24, 2002, 5:22am

We are running Vantage 5.1.126 with Crystal 8.5

We modified the PO form and used it with no errors. Now the form has been
modified again but when we print preview we get

xbase warning File needs to be verified
followed by
Error 534
when you close we get
Could not load dll procedure crpe32.dll.(3258)

I have gone into the report and re set database location and verified but no
change

Any suggestions?

Regards

John Walter
Systems Administrator
Hufcor Pty Ltd

[Non-text portions of this message have been removed]

system · December 4, 2003, 10:52am

Help please!

I am getting an error on some Crystal reports that says "ODBC error .......
Column Line Desc in table Pub.PODetail has value exceeding its max length or
precision. " If I add the part table and use the part description from
that table everything is peachy. Unfortunately that doesn't work for a
report of plant maintenance purchases since they not part master numbers.
Has anyone seen this? I had the message both on Crystal 8, and 8.5. (and
vantage 6.0)
Thanks

Liz
Guntert & Zimmerman

[Non-text portions of this message have been removed]

system · December 4, 2003, 11:21am

Its a Merant issue with the ODBC driver. It can only handle text fields shorter then (I think 4000) characters. There is no way around it with the ODBC driver. You will have to export the data in some other way.

-----Original Message-----
From: ehahn@... [mailto:ehahn@...]
Sent: Thursday, December 04, 2003 10:53 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Crystal error

Help please!

I am getting an error on some Crystal reports that says "ODBC error .......
Column Line Desc in table Pub.PODetail has value exceeding its max length or
precision. " If I add the part table and use the part description from
that table everything is peachy. Unfortunately that doesn't work for a
report of plant maintenance purchases since they not part master numbers.
Has anyone seen this? I had the message both on Crystal 8, and 8.5. (and
vantage 6.0)
Thanks

Liz
Guntert & Zimmerman

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/links

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

system · December 4, 2003, 1:06pm

Thanks Jeremy,
I did find a work-around that will capture most of the purchases, luckily we
us jobs to track maintenance time and material for the various areas. I was
able to use the part description in the part transaction table to track the
purchases.

-Liz

-----Original Message-----
From: Leonard, Jeremy [mailto:jleonard@...]
Sent: Thursday, December 04, 2003 8:22 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Crystal error

Its a Merant issue with the ODBC driver. It can only handle text fields
shorter then (I think 4000) characters. There is no way around it with the
ODBC driver. You will have to export the data in some other way.

-----Original Message-----
From: ehahn@... [mailto:ehahn@...]
Sent: Thursday, December 04, 2003 10:53 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Crystal error

Help please!

I am getting an error on some Crystal reports that says "ODBC error .......
Column Line Desc in table Pub.PODetail has value exceeding its max length or
precision. " If I add the part table and use the part description from
that table everything is peachy. Unfortunately that doesn't work for a
report of plant maintenance purchases since they not part master numbers.
Has anyone seen this? I had the message both on Crystal 8, and 8.5. (and
vantage 6.0)
Thanks

Liz
Guntert & Zimmerman

[Non-text portions of this message have been removed]

system · December 9, 2003, 10:04am

Update - Epicor does have a fix for this now. My reports work again!

-Liz

-----Original Message-----
From: Leonard, Jeremy [mailto:jleonard@...]
Sent: Thursday, December 04, 2003 8:22 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Crystal error

Its a Merant issue with the ODBC driver. It can only handle text fields
shorter then (I think 4000) characters. There is no way around it with the
ODBC driver. You will have to export the data in some other way.

-----Original Message-----
From: ehahn@... [mailto:ehahn@...]
Sent: Thursday, December 04, 2003 10:53 AM
To: vantage@yahoogroups.com
Subject: [Vantage] Crystal error

Help please!

I am getting an error on some Crystal reports that says "ODBC error .......
Column Line Desc in table Pub.PODetail has value exceeding its max length or
precision. " If I add the part table and use the part description from
that table everything is peachy. Unfortunately that doesn't work for a
report of plant maintenance purchases since they not part master numbers.
Has anyone seen this? I had the message both on Crystal 8, and 8.5. (and
vantage 6.0)
Thanks

Liz
Guntert & Zimmerman

[Non-text portions of this message have been removed]

system · December 5, 2005, 5:27pm

Has anyone ever had the following error using Crystal.

ODBC error: [DataDirect-Technologies][ODBC PROGRESS
driver][PROGRESS]Unable to allocate disk block for temp table use [MM -
No data block] (7631)

Epicor Answer Book had an article that told me the set a Windows
variable for TPE_MM_SWAPSIZE=1000000 but that did not work.

Any suggestions

Thanks,

Rich Wagner

BAW Plastics

Phone: (412)384-3100

E-Mail: rwagner@...

[Non-text portions of this message have been removed]

system · December 5, 2005, 5:36pm

I have received the error but never corrected it, if you do please let us
know

Frank Zeigafuse
Innovative Office Products
General Manager
Direct Phone: 610-559-6369
Email: fzeigafuse@...

Visit www.one.org to see how the world can be changed one person at a time.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
RICH WAGNER
Sent: Monday, December 05, 2005 5:24 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Crystal error

Has anyone ever had the following error using Crystal.

ODBC error: [DataDirect-Technologies][ODBC PROGRESS driver][PROGRESS]Unable
to allocate disk block for temp table use [MM - No data block] (7631)

Epicor Answer Book had an article that told me the set a Windows variable
for TPE_MM_SWAPSIZE=1000000 but that did not work.

Any suggestions

Thanks,

Rich Wagner

BAW Plastics

Phone: (412)384-3100

E-Mail: rwagner@...

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links

system · December 6, 2005, 5:26am

Progress Solution here

http://progress.atgnow.com/esprogress/resultDisplay.do?
gotoLink=138&docType=1006&contextId=13405%
3A138.214&clusterName=CombinedCluster&contentId=5e1a431d-467e-42aa-
b825-aa8225c81a97&responseId=a6b23249f80b7ff7%3A1b1fbf4%3A107fd64003d%
3A5a76&groupId=3&answerGroup=1&score=982&page=http%3A%2F%
2Fprogress.atgnow.com%2Fesprogress%2Fdocs%2FSolutions%2FProgress%
2FESERVER_P33960.xhtml&result=0&excerpt=Unable+to+allocate+disk+block+
for+temp+table+use+%5BMM+-+No+data+block%5D+%287631%
29&resultType=5002#Goto138

--- In vantage@yahoogroups.com, "RICH WAGNER" <rwagner@b...> wrote:
>
> Has anyone ever had the following error using Crystal.
>
>
>
> ODBC error: [DataDirect-Technologies][ODBC PROGRESS
> driver][PROGRESS]Unable to allocate disk block for temp table use
[MM -
> No data block] (7631)
>
>
>
> Epicor Answer Book had an article that told me the set a Windows
> variable for TPE_MM_SWAPSIZE=1000000 but that did not work.
>
>
>
> Any suggestions
>
>
>
> Thanks,
>
>
>
> Rich Wagner
>
> BAW Plastics
>
> Phone: (412)384-3100
>
> E-Mail: rwagner@b...
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

system · December 8, 2005, 3:31pm

You have do to make the change on the database server and then reboot
the database server

Mine is set to :

tpe_mm_swapsize

2000000

I had a crystal reportthat would not run... made the change - rebooted
and it is working fine now

bob

_____

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Frank Zeigafuse
Sent: Monday, December 05, 2005 5:35 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Crystal error

I have received the error but never corrected it, if you do please let
us
know

Frank Zeigafuse
Innovative Office Products
General Manager
Direct Phone: 610-559-6369
Email: fzeigafuse@...

Visit www.one.org to see how the world can be changed one person at a
time.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of
RICH WAGNER
Sent: Monday, December 05, 2005 5:24 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Crystal error

Has anyone ever had the following error using Crystal.

ODBC error: [DataDirect-Technologies][ODBC PROGRESS
driver][PROGRESS]Unable
to allocate disk block for temp table use [MM - No data block] (7631)

Epicor Answer Book had an article that told me the set a Windows
variable
for TPE_MM_SWAPSIZE=1000000 but that did not work.

Any suggestions

Thanks,

Rich Wagner

BAW Plastics

Phone: (412)384-3100

E-Mail: rwagner@...

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

_____

YAHOO! GROUPS LINKS

* Visit your group "vantage
<http://groups.yahoo.com/group/vantage> " on the web.

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .

_____

[Non-text portions of this message have been removed]

system · December 8, 2005, 4:12pm

I got mine to work by using the -SQLTempDisk 2000000 parameter in
Progress Explorer.

RIch

_____

From: Bob Booth [mailto:bbooth@...]
Sent: Thursday, December 08, 2005 3:30 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Crystal error

You have do to make the change on the database server and then reboot
the database server

Mine is set to :

tpe_mm_swapsize

2000000

I had a crystal reportthat would not run... made the change - rebooted
and it is working fine now

bob

_____

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Frank Zeigafuse
Sent: Monday, December 05, 2005 5:35 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] Crystal error

I have received the error but never corrected it, if you do please let
us
know

Frank Zeigafuse
Innovative Office Products
General Manager
Direct Phone: 610-559-6369
Email: fzeigafuse@...

Visit www.one.org to see how the world can be changed one person at a
time.

-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of
RICH WAGNER
Sent: Monday, December 05, 2005 5:24 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Crystal error

Has anyone ever had the following error using Crystal.

ODBC error: [DataDirect-Technologies][ODBC PROGRESS
driver][PROGRESS]Unable
to allocate disk block for temp table use [MM - No data block] (7631)

Epicor Answer Book had an article that told me the set a Windows
variable
for TPE_MM_SWAPSIZE=1000000 but that did not work.

Any suggestions

Thanks,

Rich Wagner

BAW Plastics

Phone: (412)384-3100

E-Mail: rwagner@...

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
Yahoo! Groups Links

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

_____

YAHOO! GROUPS LINKS

* Visit your group "vantage
<http://groups.yahoo.com/group/vantage> " on the web.

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .

_____

[Non-text portions of this message have been removed]

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links

SPONSORED LINKS

Manufacturing software
<http://groups.yahoo.com/gads?t=ms&k=Manufacturing+software&w1=Manufactu
ring+software&w2=Membership+database+software&w3=Database+mortgage+softw
are&w4=Pda+database+software&w5=Database+management+software&w6=Database
+marketing+software&c=6&s=188&.sig=OG5F3819UOUOg63i0bu6kA>

Membership database software
<http://groups.yahoo.com/gads?t=ms&k=Membership+database+software&w1=Man
ufacturing+software&w2=Membership+database+software&w3=Database+mortgage
+software&w4=Pda+database+software&w5=Database+management+software&w6=Da
tabase+marketing+software&c=6&s=188&.sig=N5BGdur84p-jyuOomcQdbQ>

Database mortgage software
<http://groups.yahoo.com/gads?t=ms&k=Database+mortgage+software&w1=Manuf
acturing+software&w2=Membership+database+software&w3=Database+mortgage+s
oftware&w4=Pda+database+software&w5=Database+management+software&w6=Data
base+marketing+software&c=6&s=188&.sig=8rvcSQnCqJhTCZu-0Si39A>

Pda database software
<http://groups.yahoo.com/gads?t=ms&k=Pda+database+software&w1=Manufactur
ing+software&w2=Membership+database+software&w3=Database+mortgage+softwa
re&w4=Pda+database+software&w5=Database+management+software&w6=Database+
marketing+software&c=6&s=188&.sig=u3KQrTRPAQfsWIT39aHDkg>

Database management software
<http://groups.yahoo.com/gads?t=ms&k=Database+management+software&w1=Man
ufacturing+software&w2=Membership+database+software&w3=Database+mortgage
+software&w4=Pda+database+software&w5=Database+management+software&w6=Da
tabase+marketing+software&c=6&s=188&.sig=R3CF3ODPY4gwjDZjykQYvw>

Database marketing software
<http://groups.yahoo.com/gads?t=ms&k=Database+marketing+software&w1=Manu
facturing+software&w2=Membership+database+software&w3=Database+mortgage+
software&w4=Pda+database+software&w5=Database+management+software&w6=Dat
abase+marketing+software&c=6&s=188&.sig=lmBkRUiBtvHI1u5dkymDcw>

_____

YAHOO! GROUPS LINKS

* Visit your group "vantage
<http://groups.yahoo.com/group/vantage> " on the web.

* To unsubscribe from this group, send an email to:
vantage-unsubscribe@yahoogroups.com
<mailto:vantage-unsubscribe@yahoogroups.com?subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .

_____

[Non-text portions of this message have been removed]