Disassembly of returned material

system · June 28, 2007, 1:20pm

Dave, we encountered a similar situation but we don't have the AMM Module. We have had to engineer the jobs showing the Assembly as Pull As Assembly vs. just View as Assembly in order to deconstruct the assembly and return each individual component back to inventory. Perhaps someone else with AMM has a better idea.
RSN

----- Original Message ----
From: leannah <dave.leannah@...>
To: vantage@yahoogroups.com
Sent: Tuesday, June 26, 2007 9:28:59 AM
Subject: [Vantage] Re: Disassembly of returned material

We have the AMM module, but the Return Assembly/Material returns the
Assembly to inventory - we tear it back down to the component and sub-
component level and put the inventory back. I didn't see a function
breaking the assemblies back down into components.

Am I missing something?
Dave

--- In vantage@yahoogroups .com, Carey S <rotary1@... > wrote:
>
> Do you have the AMM module?
> There is a function there called Return Assembly/Material request.
> Carey
>
>
> To: vantage@...: dave.leannah@ ...: Mon, 25 Jun 2007 18:46:16
+0000Subject: [Vantage] Disassembly of returned material
>
>
>
>
> We are a new user to Vantage and are a capital equipment
manufacturer. If someone returns one of our pieces of equipment, we
dis-assemble the equipment back down to its components and put the
reusable components back into stock. From what we have been able to
come up with, there is no good way to take a BOM and blow the lower
level materials back into stock. We have BOMs that are deep with lots
of parts and putting them back into stock by hand would be terrible.
We have one alternative of pulling out an exploded BOM list and
returning the material through the list value tab of Return Misc
Material.Does anyone else out there have this situation? What have
you done to solve it?Thank you.
>
>
> ____________ _________ _________ _________ _________ _________ _
> Hotmail to go? Get your Hotmail, news, sports and much more! Check
out the New MSN Mobile!
> http://mobile. msn.com
>
> [Non-text portions of this message have been removed]
>

____________________________________________________________________________________
Fussy? Opinionated? Impossible to please? Perfect. Join Yahoo!'s user panel and lay it on us. http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7

[Non-text portions of this message have been removed]

system · June 25, 2007, 2:47pm

We are a new user to Vantage and are a capital equipment manufacturer.
If someone returns one of our pieces of equipment, we dis-assemble the
equipment back down to its components and put the reusable components
back into stock.

From what we have been able to come up with, there is no good way to
take a BOM and blow the lower level materials back into stock. We have
BOMs that are deep with lots of parts and putting them back into stock
by hand would be terrible. We have one alternative of pulling out an
exploded BOM list and returning the material through the list value tab
of Return Misc Material.

Does anyone else out there have this situation? What have you done to
solve it?

Thank you.

system · June 25, 2007, 4:37pm

Do you have the AMM module?
There is a function there called Return Assembly/Material request.
Carey

To: vantage@yahoogroups.comFrom: dave.leannah@...: Mon, 25 Jun 2007 18:46:16 +0000Subject: [Vantage] Disassembly of returned material

We are a new user to Vantage and are a capital equipment manufacturer. If someone returns one of our pieces of equipment, we dis-assemble the equipment back down to its components and put the reusable components back into stock. From what we have been able to come up with, there is no good way to take a BOM and blow the lower level materials back into stock. We have BOMs that are deep with lots of parts and putting them back into stock by hand would be terrible. We have one alternative of pulling out an exploded BOM list and returning the material through the list value tab of Return Misc Material.Does anyone else out there have this situation? What have you done to solve it?Thank you.

_________________________________________________________________
Hotmail to go? Get your Hotmail, news, sports and much more! Check out the New MSN Mobile!
http://mobile.msn.com

[Non-text portions of this message have been removed]

system · June 26, 2007, 12:29pm

We have the AMM module, but the Return Assembly/Material returns the
Assembly to inventory - we tear it back down to the component and sub-
component level and put the inventory back. I didn't see a function
breaking the assemblies back down into components.

Am I missing something?
Dave

--- In vantage@yahoogroups.com, Carey S <rotary1@...> wrote:
>
> Do you have the AMM module?
> There is a function there called Return Assembly/Material request.
> Carey
>
>
> To: vantage@...: dave.leannah@...: Mon, 25 Jun 2007 18:46:16
+0000Subject: [Vantage] Disassembly of returned material
>
>
>
>
> We are a new user to Vantage and are a capital equipment
manufacturer. If someone returns one of our pieces of equipment, we
dis-assemble the equipment back down to its components and put the
reusable components back into stock. From what we have been able to
come up with, there is no good way to take a BOM and blow the lower
level materials back into stock. We have BOMs that are deep with lots
of parts and putting them back into stock by hand would be terrible.
We have one alternative of pulling out an exploded BOM list and
returning the material through the list value tab of Return Misc
Material.Does anyone else out there have this situation? What have
you done to solve it?Thank you.
>
>
> _________________________________________________________________
> Hotmail to go? Get your Hotmail, news, sports and much more! Check
out the New MSN Mobile!
> http://mobile.msn.com
>
> [Non-text portions of this message have been removed]
>