OK, support cleared this up. The help screens were not real clear about
directing us to the process of "check out" for a part/rev. You must check a
part/rev out (place in a group) before you can work on it. Like checking a
book out of a library. It assures only one person at a time is revising a
part. They sent a simple step by step procedure.
-Todd C.
-----Original Message-----
From: Debbie Fulgenzi [mailto:fulgenzi@...]
Sent: Wednesday, September 25, 2002 9:07 AM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Engineering Workbench (5.20)
We had the same problem when we started on 5.20. There was some changes in
the security for the BOM(Engineering Workbench). I had to add the people
who were to access the BOM to those security screens. Then everything
worked fine. I don't remember off hand which ones they were. Just call
support and they will walk you through it.
Debbie Fulgenzi
Debron Industrial Electronics, Inc.
-------Original Message-------
From: vantage@yahoogroups.com
Date: Wednesday, September 25, 2002 09:53:47 AM
To: 'vantage@yahoogroups.com'
Subject: [Vantage] Engineering Workbench (5.20)
Just wondering if there is anything special we need to do to turn on
Engineering Workbench in Part Revisions. Ran into an issue yesterday where
we can find no way to edit or add a part. Engineering Workbench is grayed
out and we can find no other way to maintain BOMs. I think it is perhaps a
licensing issue but wanted to see if maybe it was something simple that
needs to be done.
Thank you,
-Todd Caughey
Harvey Vogel Mfg. Co.
[Non-text portions of this message have been removed]
Yahoo! Groups Sponsor
ADVERTISEMENT
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto: http://groups.yahoo
<http://groups.yahoo>
com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo
<http://groups.yahoo>
com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Yahoo! Groups Sponsor
ADVERTISEMENT
<http://rd.yahoo.com/M=233217.2395914.3827946.2225242/D=egroupweb/S=17050071
83:HM/A=1227861/R=0/*http://ads.track-star.com/linker.ts?ts=1;2;312;3_2_11>
<http://us.adserver.yahoo.com/l?M=233217.2395914.3827946.2225242/D=egroupmai
l/S=:HM/A=1227861/rand=344288059>
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
directing us to the process of "check out" for a part/rev. You must check a
part/rev out (place in a group) before you can work on it. Like checking a
book out of a library. It assures only one person at a time is revising a
part. They sent a simple step by step procedure.
-Todd C.
-----Original Message-----
From: Debbie Fulgenzi [mailto:fulgenzi@...]
Sent: Wednesday, September 25, 2002 9:07 AM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Engineering Workbench (5.20)
We had the same problem when we started on 5.20. There was some changes in
the security for the BOM(Engineering Workbench). I had to add the people
who were to access the BOM to those security screens. Then everything
worked fine. I don't remember off hand which ones they were. Just call
support and they will walk you through it.
Debbie Fulgenzi
Debron Industrial Electronics, Inc.
-------Original Message-------
From: vantage@yahoogroups.com
Date: Wednesday, September 25, 2002 09:53:47 AM
To: 'vantage@yahoogroups.com'
Subject: [Vantage] Engineering Workbench (5.20)
Just wondering if there is anything special we need to do to turn on
Engineering Workbench in Part Revisions. Ran into an issue yesterday where
we can find no way to edit or add a part. Engineering Workbench is grayed
out and we can find no other way to maintain BOMs. I think it is perhaps a
licensing issue but wanted to see if maybe it was something simple that
needs to be done.
Thank you,
-Todd Caughey
Harvey Vogel Mfg. Co.
[Non-text portions of this message have been removed]
Yahoo! Groups Sponsor
ADVERTISEMENT
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto: http://groups.yahoo
<http://groups.yahoo>
com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo
<http://groups.yahoo>
com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Yahoo! Groups Sponsor
ADVERTISEMENT
<http://rd.yahoo.com/M=233217.2395914.3827946.2225242/D=egroupweb/S=17050071
83:HM/A=1227861/R=0/*http://ads.track-star.com/linker.ts?ts=1;2;312;3_2_11>
<http://us.adserver.yahoo.com/l?M=233217.2395914.3827946.2225242/D=egroupmai
l/S=:HM/A=1227861/rand=344288059>
Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have
already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and
Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/.>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/links
<http://groups.yahoo.com/group/vantage/links>
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]