Epicor Sourcing Email Setup

system · March 25, 2010, 8:12am

I tried to set this up in my server 2003 but was unable to get the relay to
work. I will have to try this again!

Steve

-----Original Message-----
From: Ned [mailto:TechnoBabbly@...]
Sent: Wednesday, March 24, 2010 4:13 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Re: Epicor Sourcing Email Setup.

Yes it does require authentication (username/password), which is why we use
the relay SMTP in house, which we don't require authentication on to connect

to and send emails.

You are going to need verification at some point in the chain, a truly open
SMTP isn't really going to exist anywhere legitimate, and more than likely
anything sent through one is going to end up getting caught in any SPAM
filter which is kept up to date.

----- Original Message -----
From: "Steve_E" <vantage@rmgfelm. <mailto:vantage%40rmgfelm.com> com>
To: <vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com>
Sent: Wednesday, March 24, 2010 5:02 PM
Subject: RE: [Vantage] Re: Epicor Sourcing Email Setup.

> Does the SMTP server at Google require Verification?
>
> Steve
>
>
> -----Original Message-----
> From: Ned [mailto:TechnoBabbly@ <mailto:TechnoBabbly%40gmail.com>
gmail.com]
> Sent: Wednesday, March 24, 2010 3:52 PM
> To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
> Subject: Re: [Vantage] Re: Epicor Sourcing Email Setup.
>
>
>
>
> We use the SMTP built into Server 2003 and have it setup as a relay server
> to the external SMTP server at Google which we are currently using for our
> email provider.
>
> ----- Original Message -----
> From: "jlogroups" <jayo@jlometal. <mailto:jayo%40jlometal.com> com>
> To: <vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com>
> Sent: Wednesday, March 24, 2010 4:17 PM
> Subject: [Vantage] Re: Epicor Sourcing Email Setup.
>
>>
>>
>> I'm trying to do the same thing. No longer have Exchange, but need a smtp
>> that doesn't require verification. I'm open for suggestions.
>>
>> Jay
>>
>>
>> --- In vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com, Troy
> Richman <troyr@...> wrote:
>>>
>>> Setup a SMTP relay server to forward the e-mails to your 3rd party
>>> provider.
>>>
>>> Troy
>>>
>>> From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
> [mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
> Behalf
>>> Of mf.zonereed
>>> Sent: March-16-10 2:05 PM
>>> To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
>>> Subject: [Vantage] Epicor Sourcing Email Setup.
>>>
>>>
>>>
>>> Has anyone setup an epicor web app with an email server that is not part
>>> of a domain. We have a 3rd party email service that requires a
>>> username/password. The sourcing web app has a field for the server, but
>>> there are no fields for username or password. We don't have exchange or
>>> any other mail server setup in house so it will be a problem if we cant
>>> get this resolved.
>>>
>>> [Non-text portions of this message have been removed]
>>>
>>>
>>>
>>> [Non-text portions of this message have been removed]
>>>
>>
>>
>>
>>
>> ------------------------------------
>>
>> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
>> have already linked your email address to a yahoo id to enable access. )
>> (1) To access the Files Section of our Yahoo!Group for Report Builder and
>> Crystal Reports and other 'goodies', please goto:
>> http://groups. <http://groups.
<http://groups.yahoo.com/group/vantage/files/.>
yahoo.com/group/vantage/files/.>
> yahoo.com/group/vantage/files/.
>> (2) To search through old msg's goto:
>> http://groups. <http://groups.
<http://groups.yahoo.com/group/vantage/messages>
yahoo.com/group/vantage/messages>
> yahoo.com/group/vantage/messages
>> (3) To view links to Vendors that provide Vantage services goto:
>> http://groups. <http://groups.
<http://groups.yahoo.com/group/vantage/linksYahoo>
yahoo.com/group/vantage/linksYahoo>
> yahoo.com/group/vantage/linksYahoo! Groups Links
>>
>>
>>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups. <http://groups.yahoo.com/group/vantage/files/.>
yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups. <http://groups.yahoo.com/group/vantage/messages>
yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups. <http://groups.yahoo.com/group/vantage/linksYahoo>
yahoo.com/group/vantage/linksYahoo! Groups Links
>
>
>

[Non-text portions of this message have been removed]

system · March 16, 2010, 5:21pm

Has anyone setup an epicor web app with an email server that is not part
of a domain. We have a 3rd party email service that requires a
username/password. The sourcing web app has a field for the server, but
there are no fields for username or password. We don't have exchange or
any other mail server setup in house so it will be a problem if we cant
get this resolved.

[Non-text portions of this message have been removed]

system · March 16, 2010, 5:24pm

Setup a SMTP relay server to forward the e-mails to your 3rd party provider.

Troy

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of mf.zonereed
Sent: March-16-10 2:05 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Epicor Sourcing Email Setup.

Has anyone setup an epicor web app with an email server that is not part
of a domain. We have a 3rd party email service that requires a
username/password. The sourcing web app has a field for the server, but
there are no fields for username or password. We don't have exchange or
any other mail server setup in house so it will be a problem if we cant
get this resolved.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

system · March 24, 2010, 4:18pm

I'm trying to do the same thing. No longer have Exchange, but need a smtp that doesn't require verification. I'm open for suggestions.

Jay

--- In vantage@yahoogroups.com, Troy Richman <troyr@...> wrote:
>
> Setup a SMTP relay server to forward the e-mails to your 3rd party provider.
>
> Troy
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of mf.zonereed
> Sent: March-16-10 2:05 PM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Epicor Sourcing Email Setup.
>
>
>
> Has anyone setup an epicor web app with an email server that is not part
> of a domain. We have a 3rd party email service that requires a
> username/password. The sourcing web app has a field for the server, but
> there are no fields for username or password. We don't have exchange or
> any other mail server setup in house so it will be a problem if we cant
> get this resolved.
>
> [Non-text portions of this message have been removed]
>
>
>
> [Non-text portions of this message have been removed]
>

system · March 24, 2010, 4:22pm

Corporate SMTP
http://www.softheap.com/newsmtp.html

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of jlogroups
Sent: March-24-10 1:18 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: Epicor Sourcing Email Setup.

I'm trying to do the same thing. No longer have Exchange, but need a smtp that doesn't require verification. I'm open for suggestions.

Jay

--- In vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>, Troy Richman <troyr@...<mailto:troyr@...>> wrote:
>
> Setup a SMTP relay server to forward the e-mails to your 3rd party provider.
>
> Troy
>
> From: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com> [mailto:vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>] On Behalf Of mf.zonereed
> Sent: March-16-10 2:05 PM
> To: vantage@yahoogroups.com<mailto:vantage%40yahoogroups.com>
> Subject: [Vantage] Epicor Sourcing Email Setup.
>
>
>
> Has anyone setup an epicor web app with an email server that is not part
> of a domain. We have a 3rd party email service that requires a
> username/password. The sourcing web app has a field for the server, but
> there are no fields for username or password. We don't have exchange or
> any other mail server setup in house so it will be a problem if we cant
> get this resolved.
>
> [Non-text portions of this message have been removed]
>
>
>
> [Non-text portions of this message have been removed]
>

[Non-text portions of this message have been removed]

system · March 24, 2010, 4:48pm

803.404

I have a relatively simple po with 4 lines, 2 releases of 12, for a total of 24 each of 4 parts.

3 of the 4 parts balance out and when creating the lines in the po receipt entry program, these three lines show the expected remaining quantities that are open.

However, where on one of the lines, it shows 8 outstanding (instead of 12). By default, it shows RECEIVED COMPLETE and if I elect to enter 12 received instead of the expected 8, then I get the expected warning.

If I open the same po in the po receipt status dashboard, I can see the receipts of the items, and in fact, the math works out showing that I should expect 12 remaining in balance.

I am not sure where the discrepancy is coming from, or if there is a program that might need to be run to reconcile these discrepancies.

Anyone have any ideas?
Carey

_________________________________________________________________
Hotmail: Trusted email with powerful SPAM protection.
http://clk.atdmt.com/GBL/go/210850553/direct/01/

[Non-text portions of this message have been removed]

system · March 24, 2010, 4:52pm

We use the SMTP built into Server 2003 and have it setup as a relay server
to the external SMTP server at Google which we are currently using for our
email provider.

----- Original Message -----
From: "jlogroups" <jayo@...>
To: <vantage@yahoogroups.com>
Sent: Wednesday, March 24, 2010 4:17 PM
Subject: [Vantage] Re: Epicor Sourcing Email Setup.

>
>
> I'm trying to do the same thing. No longer have Exchange, but need a smtp
> that doesn't require verification. I'm open for suggestions.
>
> Jay
>
>
> --- In vantage@yahoogroups.com, Troy Richman <troyr@...> wrote:
>>
>> Setup a SMTP relay server to forward the e-mails to your 3rd party
>> provider.
>>
>> Troy
>>
>> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
>> Of mf.zonereed
>> Sent: March-16-10 2:05 PM
>> To: vantage@yahoogroups.com
>> Subject: [Vantage] Epicor Sourcing Email Setup.
>>
>>
>>
>> Has anyone setup an epicor web app with an email server that is not part
>> of a domain. We have a 3rd party email service that requires a
>> username/password. The sourcing web app has a field for the server, but
>> there are no fields for username or password. We don't have exchange or
>> any other mail server setup in house so it will be a problem if we cant
>> get this resolved.
>>
>> [Non-text portions of this message have been removed]
>>
>>
>>
>> [Non-text portions of this message have been removed]
>>
>
>
>
>
> ------------------------------------
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>
>
>

system · March 24, 2010, 5:01pm

We have an open SMTP server provided to us by Cox that doesn't require
authentication. You could also build a quick SMTP server on Linux.

Edward F. Fox, Jr., CPA

Controller

Maxson Automatic Machinery Company

Phone 401-596-9873 x110 a Fax 401-596-1050

www.maxsonautomatic.com

_____

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Ned
Sent: Wednesday, March 24, 2010 4:52 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Re: Epicor Sourcing Email Setup.

We use the SMTP built into Server 2003 and have it setup as a relay server
to the external SMTP server at Google which we are currently using for our
email provider.

----- Original Message -----
From: "jlogroups" <jayo@jlometal. <mailto:jayo%40jlometal.com> com>
To: <vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com>
Sent: Wednesday, March 24, 2010 4:17 PM
Subject: [Vantage] Re: Epicor Sourcing Email Setup.

>
>
> I'm trying to do the same thing. No longer have Exchange, but need a smtp
> that doesn't require verification. I'm open for suggestions.
>
> Jay
>
>
> --- In vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com, Troy
Richman <troyr@...> wrote:
>>
>> Setup a SMTP relay server to forward the e-mails to your 3rd party
>> provider.
>>
>> Troy
>>
>> From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
>> Of mf.zonereed
>> Sent: March-16-10 2:05 PM
>> To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
>> Subject: [Vantage] Epicor Sourcing Email Setup.
>>
>>
>>
>> Has anyone setup an epicor web app with an email server that is not part
>> of a domain. We have a 3rd party email service that requires a
>> username/password. The sourcing web app has a field for the server, but
>> there are no fields for username or password. We don't have exchange or
>> any other mail server setup in house so it will be a problem if we cant
>> get this resolved.
>>
>> [Non-text portions of this message have been removed]
>>
>>
>>
>> [Non-text portions of this message have been removed]
>>
>
>
>
>
> ------------------------------------
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups. <http://groups.yahoo.com/group/vantage/files/>
yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups. <http://groups.yahoo.com/group/vantage/messages>
yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups. <http://groups.yahoo.com/group/vantage/linksYahoo>
yahoo.com/group/vantage/linksYahoo! Groups Links
>
>
>

[Non-text portions of this message have been removed]

system · March 24, 2010, 5:02pm

Does the SMTP server at Google require Verification?

Steve

-----Original Message-----
From: Ned [mailto:TechnoBabbly@...]
Sent: Wednesday, March 24, 2010 3:52 PM
To: vantage@yahoogroups.com
Subject: Re: [Vantage] Re: Epicor Sourcing Email Setup.

We use the SMTP built into Server 2003 and have it setup as a relay server
to the external SMTP server at Google which we are currently using for our
email provider.

----- Original Message -----
From: "jlogroups" <jayo@jlometal. <mailto:jayo%40jlometal.com> com>
To: <vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com>
Sent: Wednesday, March 24, 2010 4:17 PM
Subject: [Vantage] Re: Epicor Sourcing Email Setup.

>
>
> I'm trying to do the same thing. No longer have Exchange, but need a smtp
> that doesn't require verification. I'm open for suggestions.
>
> Jay
>
>
> --- In vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com, Troy
Richman <troyr@...> wrote:
>>
>> Setup a SMTP relay server to forward the e-mails to your 3rd party
>> provider.
>>
>> Troy
>>
>> From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
>> Of mf.zonereed
>> Sent: March-16-10 2:05 PM
>> To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
>> Subject: [Vantage] Epicor Sourcing Email Setup.
>>
>>
>>
>> Has anyone setup an epicor web app with an email server that is not part
>> of a domain. We have a 3rd party email service that requires a
>> username/password. The sourcing web app has a field for the server, but
>> there are no fields for username or password. We don't have exchange or
>> any other mail server setup in house so it will be a problem if we cant
>> get this resolved.
>>
>> [Non-text portions of this message have been removed]
>>
>>
>>
>> [Non-text portions of this message have been removed]
>>
>
>
>
>
> ------------------------------------
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups. <http://groups.yahoo.com/group/vantage/files/.>
yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups. <http://groups.yahoo.com/group/vantage/messages>
yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups. <http://groups.yahoo.com/group/vantage/linksYahoo>
yahoo.com/group/vantage/linksYahoo! Groups Links
>
>
>

[Non-text portions of this message have been removed]

system · March 24, 2010, 5:10pm

Just a stab in the dark: Did someone mark the release received complete (short)?

________________________________
From: Carey S <rotary1@...>
To: vantage@yahoogroups.com
Sent: Wed, March 24, 2010 4:48:47 PM
Subject: [Vantage] Discrepancy between outstanding quantities in receipt and po receipt status dashboard

Â

803.404

I have a relatively simple po with 4 lines, 2 releases of 12, for a total of 24 each of 4 parts.

3 of the 4 parts balance out and when creating the lines in the po receipt entry program, these three lines show the expected remaining quantities that are open.

However, where on one of the lines, it shows 8 outstanding (instead of 12). By default, it shows RECEIVED COMPLETE and if I elect to enter 12 received instead of the expected 8, then I get the expected warning.

If I open the same po in the po receipt status dashboard, I can see the receipts of the items, and in fact, the math works out showing that I should expect 12 remaining in balance.

I am not sure where the discrepancy is coming from, or if there is a program that might need to be run to reconcile these discrepancies.

Anyone have any ideas?
Carey

____________ _________ _________ _________ _________ _________ _
Hotmail: Trusted email with powerful SPAM protection.
http://clk.atdmt com/GBL/go/ 210850553/ direct/01/

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

system · March 24, 2010, 5:12pm

Yes it does require authentication (username/password), which is why we use
the relay SMTP in house, which we don't require authentication on to connect
to and send emails.

You are going to need verification at some point in the chain, a truly open
SMTP isn't really going to exist anywhere legitimate, and more than likely
anything sent through one is going to end up getting caught in any SPAM
filter which is kept up to date.

----- Original Message -----
From: "Steve_E" <vantage@...>
To: <vantage@yahoogroups.com>
Sent: Wednesday, March 24, 2010 5:02 PM
Subject: RE: [Vantage] Re: Epicor Sourcing Email Setup.

> Does the SMTP server at Google require Verification?
>
> Steve
>
>
> -----Original Message-----
> From: Ned [mailto:TechnoBabbly@...]
> Sent: Wednesday, March 24, 2010 3:52 PM
> To: vantage@yahoogroups.com
> Subject: Re: [Vantage] Re: Epicor Sourcing Email Setup.
>
>
>
>
> We use the SMTP built into Server 2003 and have it setup as a relay server
> to the external SMTP server at Google which we are currently using for our
> email provider.
>
> ----- Original Message -----
> From: "jlogroups" <jayo@jlometal. <mailto:jayo%40jlometal.com> com>
> To: <vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com>
> Sent: Wednesday, March 24, 2010 4:17 PM
> Subject: [Vantage] Re: Epicor Sourcing Email Setup.
>
>>
>>
>> I'm trying to do the same thing. No longer have Exchange, but need a smtp
>> that doesn't require verification. I'm open for suggestions.
>>
>> Jay
>>
>>
>> --- In vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com, Troy
> Richman <troyr@...> wrote:
>>>
>>> Setup a SMTP relay server to forward the e-mails to your 3rd party
>>> provider.
>>>
>>> Troy
>>>
>>> From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
> [mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
> Behalf
>>> Of mf.zonereed
>>> Sent: March-16-10 2:05 PM
>>> To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
>>> Subject: [Vantage] Epicor Sourcing Email Setup.
>>>
>>>
>>>
>>> Has anyone setup an epicor web app with an email server that is not part
>>> of a domain. We have a 3rd party email service that requires a
>>> username/password. The sourcing web app has a field for the server, but
>>> there are no fields for username or password. We don't have exchange or
>>> any other mail server setup in house so it will be a problem if we cant
>>> get this resolved.
>>>
>>> [Non-text portions of this message have been removed]
>>>
>>>
>>>
>>> [Non-text portions of this message have been removed]
>>>
>>
>>
>>
>>
>> ------------------------------------
>>
>> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
>> have already linked your email address to a yahoo id to enable access. )
>> (1) To access the Files Section of our Yahoo!Group for Report Builder and
>> Crystal Reports and other 'goodies', please goto:
>> http://groups. <http://groups.yahoo.com/group/vantage/files/.>
> yahoo.com/group/vantage/files/.
>> (2) To search through old msg's goto:
>> http://groups. <http://groups.yahoo.com/group/vantage/messages>
> yahoo.com/group/vantage/messages
>> (3) To view links to Vendors that provide Vantage services goto:
>> http://groups. <http://groups.yahoo.com/group/vantage/linksYahoo>
> yahoo.com/group/vantage/linksYahoo! Groups Links
>>
>>
>>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>
>
>

system · March 24, 2010, 5:17pm

we have server 2003. that works good for relaying?

Jay

--- In vantage@yahoogroups.com, "Ned" <TechnoBabbly@...> wrote:
>
> We use the SMTP built into Server 2003 and have it setup as a relay server
> to the external SMTP server at Google which we are currently using for our
> email provider.
>
>
>
>
> ----- Original Message -----
> From: "jlogroups" <jayo@...>
> To: <vantage@yahoogroups.com>
> Sent: Wednesday, March 24, 2010 4:17 PM
> Subject: [Vantage] Re: Epicor Sourcing Email Setup.
>
>
> >
> >
> > I'm trying to do the same thing. No longer have Exchange, but need a smtp
> > that doesn't require verification. I'm open for suggestions.
> >
> > Jay
> >
> >
> > --- In vantage@yahoogroups.com, Troy Richman <troyr@> wrote:
> >>
> >> Setup a SMTP relay server to forward the e-mails to your 3rd party
> >> provider.
> >>
> >> Troy
> >>
> >> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
> >> Of mf.zonereed
> >> Sent: March-16-10 2:05 PM
> >> To: vantage@yahoogroups.com
> >> Subject: [Vantage] Epicor Sourcing Email Setup.
> >>
> >>
> >>
> >> Has anyone setup an epicor web app with an email server that is not part
> >> of a domain. We have a 3rd party email service that requires a
> >> username/password. The sourcing web app has a field for the server, but
> >> there are no fields for username or password. We don't have exchange or
> >> any other mail server setup in house so it will be a problem if we cant
> >> get this resolved.
> >>
> >> [Non-text portions of this message have been removed]
> >>
> >>
> >>
> >> [Non-text portions of this message have been removed]
> >>
> >
> >
> >
> >
> > ------------------------------------
> >
> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> > have already linked your email address to a yahoo id to enable access. )
> > (1) To access the Files Section of our Yahoo!Group for Report Builder and
> > Crystal Reports and other 'goodies', please goto:
> > http://groups.yahoo.com/group/vantage/files/.
> > (2) To search through old msg's goto:
> > http://groups.yahoo.com/group/vantage/messages
> > (3) To view links to Vendors that provide Vantage services goto:
> > http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
> >
> >
> >
>

system · March 24, 2010, 5:22pm

No, they all appeared open. In the lines screen under receipts, it shows an outstanding quantity of 8, but the math between the po order totals and and receipt summaries just don't match. I can not find anywhere any line activity that would even imply to be a potential source of the discrepancy. Strange.

-------------------------------------------------------------------------------------------------------------------------------
Just a stab in the dark: Did someone mark the release received complete (short)?

________________________________
From: Carey S <rotary1@...>
To: vantage@yahoogroups.com
Sent: Wed, March 24, 2010 4:48:47 PM
Subject: [Vantage] Discrepancy between outstanding quantities in receipt and po receipt status dashboard

803.404

I have a relatively simple po with 4 lines, 2 releases of 12, for a total of 24 each of 4 parts.

3 of the 4 parts balance out and when creating the lines in the po receipt entry program, these three lines show the expected remaining quantities that are open.

However, where on one of the lines, it shows 8 outstanding (instead of 12). By default, it shows RECEIVED COMPLETE and if I elect to enter 12 received instead of the expected 8, then I get the expected warning.

If I open the same po in the po receipt status dashboard, I can see the receipts of the items, and in fact, the math works out showing that I should expect 12 remaining in balance.

I am not sure where the discrepancy is coming from, or if there is a program that might need to be run to reconcile these discrepancies.

Anyone have any ideas?
Carey

____________ _________ _________ _________ _________ _________ _
Hotmail: Trusted email with powerful SPAM protection.
http://clk.atdmt com/GBL/go/ 210850553/ direct/01/

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

_________________________________________________________________
Hotmail: Trusted email with powerful SPAM protection.
http://clk.atdmt.com/GBL/go/210850553/direct/01/

[Non-text portions of this message have been removed]

system · March 24, 2010, 5:29pm

Sounds like a bug. 404 was full of them. We quickly went to 405 after going live.

--- Original Message ---
From:"Carey S" <rotary1@...>
Sent:Wed 3/24/10 5:23 pm
To:<vantage@yahoogroups.com>
Subj:RE: [Vantage] Discrepancy between outstanding quantities in receipt and po receipt status dashboard

No, they all appeared open. In the lines screen under receipts, it shows an outstanding quantity of 8, but the math between the po order totals and and receipt summaries just don't match. I can not find anywhere any line activity that would even imply to be a potential source of the discrepancy. Strange.

-------------------------------------------------------------------------------------------------------------------------------
Just a stab in the dark: Did someone mark the release received complete (short)?

________________________________
From: Carey S <rotary1@...>
To: vantage@yahoogroups.com
Sent: Wed, March 24, 2010 4:48:47 PM
Subject: [Vantage] Discrepancy between outstanding quantities in receipt and po receipt status dashboard

803.404

I have a relatively simple po with 4 lines, 2 releases of 12, for a total of 24 each of 4 parts.

3 of the 4 parts balance out and when creating the lines in the po receipt entry program, these three lines show the expected remaining quantities that are open.

However, where on one of the lines, it shows 8 outstanding (instead of 12). By default, it shows RECEIVED COMPLETE and if I elect to enter 12 received instead of the expected 8, then I get the expected warning.

If I open the same po in the po receipt status dashboard, I can see the receipts of the items, and in fact, the math works out showing that I should expect 12 remaining in balance.

I am not sure where the discrepancy is coming from, or if there is a program that might need to be run to reconcile these discrepancies.

Anyone have any ideas?
Carey

____________ _________ _________ _________ _________ _________ _
Hotmail: Trusted email with powerful SPAM protection.
http://clk.atdmt com/GBL/go/ 210850553/ direct/01/

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

_________________________________________________________________
Hotmail: Trusted email with powerful SPAM protection.
http://clk.atdmt.com/GBL/go/210850553/direct/01/

[Non-text portions of this message have been removed]

system · March 24, 2010, 5:35pm

Yes, Works like a charm for us. We have our windows servers(alerts, backup
exec, etc), phone system, Vantage, UPS, Fax Server, Alarm/HVAC system all
using it with absolutely no problems.

The only problem we had was trying to use the SMTP on our Exchange server
once we shut down Exchange, we could never fully clean it out so we moved
the SMTP to a new server and set it up from scratch and it has worked
seemlessly, except for the day when we changed the password of the account
we use on google and forgot to update the SMTP server with the new password.

----- Original Message -----
From: "jlogroups" <jayo@...>
To: <vantage@yahoogroups.com>
Sent: Wednesday, March 24, 2010 5:16 PM
Subject: [Vantage] Re: Epicor Sourcing Email Setup.

> we have server 2003. that works good for relaying?
>
> Jay
>
>
> --- In vantage@yahoogroups.com, "Ned" <TechnoBabbly@...> wrote:
>>
>> We use the SMTP built into Server 2003 and have it setup as a relay
>> server
>> to the external SMTP server at Google which we are currently using for
>> our
>> email provider.
>>
>>
>>
>>
>> ----- Original Message -----
>> From: "jlogroups" <jayo@...>
>> To: <vantage@yahoogroups.com>
>> Sent: Wednesday, March 24, 2010 4:17 PM
>> Subject: [Vantage] Re: Epicor Sourcing Email Setup.
>>
>>
>> >
>> >
>> > I'm trying to do the same thing. No longer have Exchange, but need a
>> > smtp
>> > that doesn't require verification. I'm open for suggestions.
>> >
>> > Jay
>> >
>> >
>> > --- In vantage@yahoogroups.com, Troy Richman <troyr@> wrote:
>> >>
>> >> Setup a SMTP relay server to forward the e-mails to your 3rd party
>> >> provider.
>> >>
>> >> Troy
>> >>
>> >> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On
>> >> Behalf
>> >> Of mf.zonereed
>> >> Sent: March-16-10 2:05 PM
>> >> To: vantage@yahoogroups.com
>> >> Subject: [Vantage] Epicor Sourcing Email Setup.
>> >>
>> >>
>> >>
>> >> Has anyone setup an epicor web app with an email server that is not
>> >> part
>> >> of a domain. We have a 3rd party email service that requires a
>> >> username/password. The sourcing web app has a field for the server,
>> >> but
>> >> there are no fields for username or password. We don't have exchange
>> >> or
>> >> any other mail server setup in house so it will be a problem if we
>> >> cant
>> >> get this resolved.
>> >>
>> >> [Non-text portions of this message have been removed]
>> >>
>> >>
>> >>
>> >> [Non-text portions of this message have been removed]
>> >>
>> >
>> >
>> >
>> >
>> > ------------------------------------
>> >
>> > Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
>> > have already linked your email address to a yahoo id to enable
>> > access. )
>> > (1) To access the Files Section of our Yahoo!Group for Report Builder
>> > and
>> > Crystal Reports and other 'goodies', please goto:
>> > http://groups.yahoo.com/group/vantage/files/.
>> > (2) To search through old msg's goto:
>> > http://groups.yahoo.com/group/vantage/messages
>> > (3) To view links to Vendors that provide Vantage services goto:
>> > http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>> >
>> >
>> >
>>
>
>
>
>
> ------------------------------------
>
> Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
> have already linked your email address to a yahoo id to enable access. )
> (1) To access the Files Section of our Yahoo!Group for Report Builder and
> Crystal Reports and other 'goodies', please goto:
> http://groups.yahoo.com/group/vantage/files/.
> (2) To search through old msg's goto:
> http://groups.yahoo.com/group/vantage/messages
> (3) To view links to Vendors that provide Vantage services goto:
> http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
>
>
>