i'd sure like it as well. my email is jmartin@... thanks
-----Original Message-----
From: David Pralguske [mailto:dpralguske@...]
Sent: Friday, September 22, 2000 1:56 PM
To: 'vantage@egroups.com'
Subject: [Vantage] Monitoring Late Materials
Could you also send a copy to me?
Thanks.
Dpralguske@... <mailto:Dpralguske@...>
David B. Pralguske
-----Original Message-----
From: vantage@egroups.com [SMTP:vantage@egroups.com]
Sent: Friday, September 22, 2000 2:31 PM
To: vantage@egroups.com
Subject: [Vantage] Digest Number 942
-------------------------- eGroups Sponsor
We no longer allow attachments to files. To access/share Report
Files, please go to the following link:
http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try
it, go to www.egroups.com, login and be sure to save your password, choose
My Groups, choose Vantage, then choose Files. If you save the password, the
link above will work the next time you try it.)
------------------------------------------------------------------------
There are 25 messages in this issue.
Topics in this digest:
1. Re: Monitoring Late Materials
From: "Lori Gravert" <mis_jtcullen@...>
2. RE: Monitoring Late Materials
From: "Charles Metcalf" <cmetcalf@...>
3. RE: Epicor Perspectives Customer Conference - Views
From: Todd Caughey <caugheyt@...>
4. RE: Epicor Perspectives Customer Conference - Views
From: "Eddy, Warren" <warren.eddy@...>
5. AP INVOICES
From: SGARRISON@...
6. RE: AP INVOICES
From: sarah.vareschi@...
7. Report Builder
From: Marvin Myers <marvin@...>
8. RE: AP INVOICES
From: "Wilmoth, Deb" <Deb@...>
9. RE: Report Builder
From: "Kimberly Maxwell"
<kimberly.maxwell@...>
10. Re: Report Builder
From: "Tim Care" <ecfmis@...>
11. RE: Epicor Perspectives Customer Conference - Views
From: Lydia Coffman <lcoffman@...>
12. RE: Epicor Perspectives Customer Conference - Views
From: "Terry Williams" <tlw@...>
13. RE: Epicor Perspectives Customer Conference - Views
From: "Reilly, Rhonda" <rreilly@...>
14. Memo Field on Report Builder Report
From: sarah.vareschi@...
15. RE: AP INVOICES
From: Nora Story <Nora_Story@...>
16. RE: Epicor Perspectives Customer Conference - Views
From: Nora Story <Nora_Story@...>
17. Shop Floor PC's
From: Todd Anderson <tanderson@...>
18. Re: Memo Field on Report Builder Report
From: Wayne Cox <wmc@...>
19. RE: Memo Field on Report Builder Report
From: sarah.vareschi@...
20. New file uploaded to vantage
From: <vantage@egroups.com>
21. RE: Memo Field on Report Builder Report
From: "Shirley Graver" <shirleyg@...>
22. RE: Memo Field on Report Builder Report
From: Wayne Cox <wmc@...>
23. RE: Memo Field on Report Builder Report
From: sarah.vareschi@...
24. Vacation
From: jeniwilson@...
25. RE: Vacation
From: "Wilmoth, Deb" <Deb@...>
________________________________________________________________________
________________________________________________________________________
Message: 1
Date: Fri, 22 Sep 2000 07:08:46 CDT
From: "Lori Gravert" <mis_jtcullen@...>
Subject: Re: Monitoring Late Materials
Could I also get a copy? Thank You
Get Your Private, Free E-mail from MSN Hotmail at
http://www.hotmail.com
Share information about yourself, create your own public profile at
http://profiles.msn.com
________________________________________________________________________
________________________________________________________________________
Message: 2
Date: Fri, 22 Sep 2000 07:16:47 -0500
From: "Charles Metcalf" <cmetcalf@...>
Subject: RE: Monitoring Late Materials
Steve
Are you going to post this report. If not please email a copy to me
at
chuck_metcalf@...
Thanks
Chuck
-----Original Message-----
From: Lori Gravert [mailto:mis_jtcullen@...]
Sent: Friday, September 22, 2000 7:09 AM
To: vantage@egroups.com
Subject: Re: [Vantage] Monitoring Late Materials
Could I also get a copy? Thank You
Get Your Private, Free E-mail from MSN Hotmail at
http://www.hotmail.com
Share information about yourself, create your own public profile at
http://profiles.msn.com
We no longer allow attachments to files. To access/share Report
Files,
please go to the following link:
http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try
it, go to
www.egroups.com, login and be sure to save your password, choose My
Groups,
choose Vantage, then choose Files. If you save the password, the
link above
will work the next time you try it.)
________________________________________________________________________
________________________________________________________________________
Message: 3
Date: Fri, 22 Sep 2000 08:03:09 -0500
From: Todd Caughey <caugheyt@...>
Subject: RE: Epicor Perspectives Customer Conference - Views
I have always found the conferences to be a bargain in terms of
education.
Most of the sessions and especially the workshops offer almost all
of the
material of the full day classes but at a much faster pace.
Classroom
training usually bores the heck out of me and seems to drag
on-and-on
whereas the conference sessions give me enough hints and ideas to
figure
things out for myself. On top of this there is the session notes
book which
I refer to often all year long. Finally the #1 benefit is actually
meeting
people face to face and discussing issues much as on this board but
in
real-time. In terms of value to the company I describe it to our
VP-Finance
as the best education bang for the buck we can get.
That said, I am deeply disappointed at the location this year and
the
incredible arrogance of Epicor to book it at a place that costs $185
a
night. Most of their clientele are very cost conscious
manufacturing
operations. To top it off the hotel is now booked solid for the
night of
the 16th and they are sending people 3-1/2 miles away to a sister
property
(Rancho Las Palmas). Someone miscalaculated the turnout plus the
vendors &
exhibitors. This time of year Las Vegas is also expensive (highest
season
throughout Southwest I was told) so it would not have been much
better. I
would like to see a return to late-April or May and at least move it
back to
Las Vegas if not somewhere more central in North America. I'm sure
it saves
Epicor a lot of airfare to be so close to their HQ but this is a
"user"
conference after all. I'm flying in-out of Las Vegas and driving
down for
half the cost of flying to Palm Springs and the money I save on
Wednesday
night at the Marriott Desert Springs will pay for three nights in
Las Vegas.
-Todd Caughey
Harvey Vogel Mfg. Co.
Woodbury, MN
-----Original Message-----
From: Martin Nijdam [mailto:martinn@...]
Sent: Thursday, September 21, 2000 3:15 PM
To: Oneliste (E-mail)
Subject: [Vantage] Epicor Perspectives Customer Conference -
Registration
Reminder
<http://click.egroups.com/1/9155/13/_/411782/_/969567465/>
<http://adimg.egroups.com/img/9155/13/_/411782/_/969567465/468x60_hate_searc
hing5.gif>
<http://www.egroups.com/> eGroups My
<http://www.egroups.com/mygroups> Groups | vantage Main
<http://www.egroups.com/group/vantage> Page | Start a new
<http://click.egroups.com/1/8150/13/_/411782/_/969567466/> group!
Since we have been live on vantage for a year now, I've never been
to this
users conference. I was looking forward to it but I've looked at the
course
description and it does seem to me that this seminar is not worth
+2000$
U.S. (not including airfare)? I think this will be a very hard sell
to my
boss. Does anybody go to these conferences? How do you see the
return on
investment?
Renaissance Esmerelda Resort, (800)468-3571, $185 per night
Marriott Las Palmas Resort , (800)468-3571, $185 per night
Miramonte Resort, (800)237-2926, $185 per night
Indian Wells Resort, (800)248-3220, $149 per night
The conference fee is $1,095, which includes entrance to all
sessions, labs
and trade shows, as well as a reception on Sunday night; breakfast,
lunch, a
Martin Nijdam (Jr. Ing.)
Suss Woodcraft Int'l
(514) 363-3565
We no longer allow attachments to files. To access/share Report
Files,
please go to the following link:
http://www.egroups.com/files/vantage/
<http://www.egroups.com/files/vantage/>
(Note: If this link does not work for you the first time you try
it, go to
www.egroups.com, login and be sure to save your password, choose My
Groups,
choose Vantage, then choose Files. If you save the password, the
link above
will work the next time you try it.)
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 4
Date: Fri, 22 Sep 2000 08:12:53 -0500
From: "Eddy, Warren" <warren.eddy@...>
Subject: RE: Epicor Perspectives Customer Conference - Views
This will be my first Vantage conference, however, in the past our
company
has sent several persons. Due to the nearly doubled (I'm told) fee
and the
high cost of hotel/travel the decision was made to only send one
person. If
the conference cost and hotel/travel would be more reasonable I'm
fairly
certain we would be sending more than one person.
Warren Eddy
National Tube Form LLC
warren.eddy@...
219 478-2363 ext 217
-----Original Message-----
From: Todd Caughey [mailto:caugheyt@...]
Sent: Friday, September 22, 2000 8:03 AM
To: 'vantage@egroups.com'
Subject: RE: [Vantage] Epicor Perspectives Customer Conference -
Views
-------------------------- eGroups Sponsor
-------------------------~-~>
Your family still won't know what you do. At least they'll know
where.
The resources, brainpower & breadth of opportunities at Microsoft
are
unmatched. The only question is are you ready for that kind of
impact?
http://click.egroups.com/1/9223/13/_/411782/_/969627801/
---------------------------------------------------------------------_->
I have always found the conferences to be a bargain in terms of
education.
Most of the sessions and especially the workshops offer almost all
of the
material of the full day classes but at a much faster pace.
Classroom
training usually bores the heck out of me and seems to drag
on-and-on
whereas the conference sessions give me enough hints and ideas to
figure
things out for myself. On top of this there is the session notes
book which
I refer to often all year long. Finally the #1 benefit is actually
meeting
people face to face and discussing issues much as on this board but
in
real-time. In terms of value to the company I describe it to our
VP-Finance
as the best education bang for the buck we can get.
That said, I am deeply disappointed at the location this year and
the
incredible arrogance of Epicor to book it at a place that costs $185
a
night. Most of their clientele are very cost conscious
manufacturing
operations. To top it off the hotel is now booked solid for the
night of
the 16th and they are sending people 3-1/2 miles away to a sister
property
(Rancho Las Palmas). Someone miscalaculated the turnout plus the
vendors &
exhibitors. This time of year Las Vegas is also expensive (highest
season
throughout Southwest I was told) so it would not have been much
better. I
would like to see a return to late-April or May and at least move it
back to
Las Vegas if not somewhere more central in North America. I'm sure
it saves
Epicor a lot of airfare to be so close to their HQ but this is a
"user"
conference after all. I'm flying in-out of Las Vegas and driving
down for
half the cost of flying to Palm Springs and the money I save on
Wednesday
night at the Marriott Desert Springs will pay for three nights in
Las Vegas.
-Todd Caughey
Harvey Vogel Mfg. Co.
Woodbury, MN
-----Original Message-----
From: Martin Nijdam [mailto:martinn@...]
Sent: Thursday, September 21, 2000 3:15 PM
To: Oneliste (E-mail)
Subject: [Vantage] Epicor Perspectives Customer Conference -
Registration
Reminder
<http://click.egroups.com/1/9155/13/_/411782/_/969567465/>
<http://adimg.egroups.com/img/9155/13/_/411782/_/969567465/468x60_hate_searc
hing5.gif>
<http://www.egroups.com/> eGroups My
<http://www.egroups.com/mygroups> Groups | vantage Main
<http://www.egroups.com/group/vantage> Page | Start a new
<http://click.egroups.com/1/8150/13/_/411782/_/969567466/> group!
Since we have been live on vantage for a year now, I've never been
to this
users conference. I was looking forward to it but I've looked at the
course
description and it does seem to me that this seminar is not worth
+2000$
U.S. (not including airfare)? I think this will be a very hard sell
to my
boss. Does anybody go to these conferences? How do you see the
return on
investment?
Renaissance Esmerelda Resort, (800)468-3571, $185 per night
Marriott Las Palmas Resort , (800)468-3571, $185 per night
Miramonte Resort, (800)237-2926, $185 per night
Indian Wells Resort, (800)248-3220, $149 per night
The conference fee is $1,095, which includes entrance to all
sessions, labs
and trade shows, as well as a reception on Sunday night; breakfast,
lunch, a
Martin Nijdam (Jr. Ing.)
Suss Woodcraft Int'l
(514) 363-3565
We no longer allow attachments to files. To access/share Report
Files,
please go to the following link:
http://www.egroups.com/files/vantage/
<http://www.egroups.com/files/vantage/>
(Note: If this link does not work for you the first time you try
it, go to
www.egroups.com, login and be sure to save your password, choose My
Groups,
choose Vantage, then choose Files. If you save the password, the
link above
will work the next time you try it.)
[Non-text portions of this message have been removed]
We no longer allow attachments to files. To access/share Report
Files,
please go to the following link:
http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try
it, go to
www.egroups.com, login and be sure to save your password, choose My
Groups,
choose Vantage, then choose Files. If you save the password, the
link above
will work the next time you try it.)
________________________________________________________________________
________________________________________________________________________
Message: 5
Date: Fri, 22 Sep 2000 13:38:57 -0000
From: SGARRISON@...
Subject: AP INVOICES
I needed some help regarding posting A/P invoices. I am trying to
post employee expense reports, C.O.D. shipments and non PO items in
vantage. I need these postings to hit our job costing module. Has
anyone been able to post non-PO invoices to Vantage and hit job
cost.
Thank you
Shawn Garrison
Accountant
Tamglass Tempering Systems, Inc.
________________________________________________________________________
________________________________________________________________________
Message: 6
Date: Fri, 22 Sep 2000 09:54:50 -0400
From: sarah.vareschi@...
Subject: RE: AP INVOICES
The only way I have found to get a non-po invoice to hit a job is to
do a
miscellaneous receipt against the job and then invoice that receipt.
It is
several additional steps than our old system had, because before you
can
receive against the job, there has to be a line item on the job to
receive
to.
If anyone knows of a different way, I, too, would be happy to hear
it!
Sarah
________________________________________________________________________
________________________________________________________________________
Message: 7
Date: Fri, 22 Sep 2000 10:14:04 -0400
From: Marvin Myers <marvin@...>
Subject: Report Builder
I am working with the part bin report that is posted on the One
List. I
can't seem to get
the report to print 0 on hand qty records. Does anyone know why this
happens. I know that
I am probably overlooking something simple.
Marvin R. Myers
Computer Systems Engineer
marvin@...
717-252-3667 ext. 231
________________________________________________________________________
________________________________________________________________________
Message: 8
Date: Fri, 22 Sep 2000 09:21:26 -0500
From: "Wilmoth, Deb" <Deb@...>
Subject: RE: AP INVOICES
I use Job Cost Adjustments to get those costs to the job. The bad
news
there is that it creates an inventory adjustment and I have to write
a
journal entry to reverse $ to the proper G/L ledger accounts because
I
firmly believe in $0 balance in suspense type accounts. Sometimes
we get
close to 20 such adjustments per month. Not user friendly.
I would prefer to see a feature added to A/P whereby we can hit
those costs
to the job from A/P. Calvin, are we way too late in making
requests for
version 6? All the freight bills and trips to the hardware store
for
miscellaneous hardware are two perfect examples. Creating PO's for
freight
- Arrrrghhhhh!!!! Yet that is a big ticket item that should not be
overlooked on the cost of a job.
Deb @ Reeder & Kline Machine Company, Inc.
The only way I have found to get a non-po invoice to hit a job is to
do a
miscellaneous receipt against the job and then invoice that receipt.
It is
several additional steps than our old system had, because before you
can
receive against the job, there has to be a line item on the job to
receive
to.
If anyone knows of a different way, I, too, would be happy to hear
it!
Sarah
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 9
Date: Fri, 22 Sep 2000 07:39:04 -0700
From: "Kimberly Maxwell" <kimberly.maxwell@...>
Subject: RE: Report Builder
Marvin,
We just worked with Vantage support concerning the issue of
receiving 0
onhand qty for another report and this was the response:
Unfortunately, a part number has to have a least 1 in its quantity
to be
able to pull info for a report. Report cannot be run. Best way to
simulate
is to run a report of all inventory, also run a report of inventory
with
qtys on hand and compare the two.
Hope this helps! We thought we were over looking something simple
also! If
anyone knows some way to get that answer, please pass it on.
Kimberly Maxwell
Westwood Precision, Inc.
PH: 425-347-1303 Ext. 41
Fax: 425-353-8945
email: kimberly.maxwell@...
www.westwoodprecision.com
-----Original Message-----
I am working with the part bin report that is posted on the One
List. I
can't seem to get
the report to print 0 on hand qty records. Does anyone know why this
happens. I know that
I am probably overlooking something simple.
Marvin R. Myers
Computer Systems Engineer
marvin@...
717-252-3667 ext. 231
________________________________________________________________________
________________________________________________________________________
Message: 10
Date: Fri, 22 Sep 2000 11:00:08 -0400
From: "Tim Care" <ecfmis@...>
Subject: Re: Report Builder
If you start with the part table, and then join to
the Part Bin table with a left out join, you will
get all parts, whether or not they have an entry
in the Part Bin Table. The ones that do not
have a Part Bin record will have a ? for unknown
value. You can then set the unknown value to show
0 instead of ?.
Tim Care
Electro Chemical Finishing
-----Original Message-----
From: David Pralguske [mailto:dpralguske@...]
Sent: Friday, September 22, 2000 1:56 PM
To: 'vantage@egroups.com'
Subject: [Vantage] Monitoring Late Materials
Could you also send a copy to me?
Thanks.
Dpralguske@... <mailto:Dpralguske@...>
David B. Pralguske
-----Original Message-----
From: vantage@egroups.com [SMTP:vantage@egroups.com]
Sent: Friday, September 22, 2000 2:31 PM
To: vantage@egroups.com
Subject: [Vantage] Digest Number 942
-------------------------- eGroups Sponsor
We no longer allow attachments to files. To access/share Report
Files, please go to the following link:
http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try
it, go to www.egroups.com, login and be sure to save your password, choose
My Groups, choose Vantage, then choose Files. If you save the password, the
link above will work the next time you try it.)
------------------------------------------------------------------------
There are 25 messages in this issue.
Topics in this digest:
1. Re: Monitoring Late Materials
From: "Lori Gravert" <mis_jtcullen@...>
2. RE: Monitoring Late Materials
From: "Charles Metcalf" <cmetcalf@...>
3. RE: Epicor Perspectives Customer Conference - Views
From: Todd Caughey <caugheyt@...>
4. RE: Epicor Perspectives Customer Conference - Views
From: "Eddy, Warren" <warren.eddy@...>
5. AP INVOICES
From: SGARRISON@...
6. RE: AP INVOICES
From: sarah.vareschi@...
7. Report Builder
From: Marvin Myers <marvin@...>
8. RE: AP INVOICES
From: "Wilmoth, Deb" <Deb@...>
9. RE: Report Builder
From: "Kimberly Maxwell"
<kimberly.maxwell@...>
10. Re: Report Builder
From: "Tim Care" <ecfmis@...>
11. RE: Epicor Perspectives Customer Conference - Views
From: Lydia Coffman <lcoffman@...>
12. RE: Epicor Perspectives Customer Conference - Views
From: "Terry Williams" <tlw@...>
13. RE: Epicor Perspectives Customer Conference - Views
From: "Reilly, Rhonda" <rreilly@...>
14. Memo Field on Report Builder Report
From: sarah.vareschi@...
15. RE: AP INVOICES
From: Nora Story <Nora_Story@...>
16. RE: Epicor Perspectives Customer Conference - Views
From: Nora Story <Nora_Story@...>
17. Shop Floor PC's
From: Todd Anderson <tanderson@...>
18. Re: Memo Field on Report Builder Report
From: Wayne Cox <wmc@...>
19. RE: Memo Field on Report Builder Report
From: sarah.vareschi@...
20. New file uploaded to vantage
From: <vantage@egroups.com>
21. RE: Memo Field on Report Builder Report
From: "Shirley Graver" <shirleyg@...>
22. RE: Memo Field on Report Builder Report
From: Wayne Cox <wmc@...>
23. RE: Memo Field on Report Builder Report
From: sarah.vareschi@...
24. Vacation
From: jeniwilson@...
25. RE: Vacation
From: "Wilmoth, Deb" <Deb@...>
________________________________________________________________________
________________________________________________________________________
Message: 1
Date: Fri, 22 Sep 2000 07:08:46 CDT
From: "Lori Gravert" <mis_jtcullen@...>
Subject: Re: Monitoring Late Materials
Could I also get a copy? Thank You
>From: "Troy Funte" <tfunte@...>is
>Reply-To: vantage@egroups.com
>To: <vantage@egroups.com>
>Subject: Re: [Vantage] Monitoring Late Materials
>Date: Fri, 15 Sep 2000 17:32:59 -0400
>
>Would you mind sending me a copy also?
>
>Troy Funte
>Liberty Electronics
>tfunte@...
> ----- Original Message -----
> From: Steve Lewis
> To: vantage@egroups.com
> Sent: Friday, September 15, 2000 3:01 PM
> Subject: RE: [Vantage] Monitoring Late Materials
>
>
>
> My Groups | vantage Main Page
>
>
> Steve - I would be interested in this report. My E-mail address
> S.Lewis@...you run
> Thanks,
> Steve Lewis
>
> -
>
> We have created a "Shortage Report in Report Builder. Whenever
> the report it gives you all outstanding activities on a vantagejob.
> This includes every operation not completed to the expectedquantity and
> purchased materials not issued to the job to the expectedquantity. All
> completed items operations and material issues are deleted fromthe job.
> Let me know if you are interested and I could probably forwardyou a
> copy of the report.Files,
>
> Steve
>
>
>
>
> We no longer allow attachments to files. To access/share Report
>please go to the following link:http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time youtry it, go
>to www.egroups.com, login and be sure to save your password, chooseMy
>Groups, choose Vantage, then choose Files. If you save thepassword, the
>link above will work the next time you try it.)_________________________________________________________________________
>
>
>
>
>[Non-text portions of this message have been removed]
>
Get Your Private, Free E-mail from MSN Hotmail at
http://www.hotmail.com
Share information about yourself, create your own public profile at
http://profiles.msn.com
________________________________________________________________________
________________________________________________________________________
Message: 2
Date: Fri, 22 Sep 2000 07:16:47 -0500
From: "Charles Metcalf" <cmetcalf@...>
Subject: RE: Monitoring Late Materials
Steve
Are you going to post this report. If not please email a copy to me
at
chuck_metcalf@...
Thanks
Chuck
-----Original Message-----
From: Lori Gravert [mailto:mis_jtcullen@...]
Sent: Friday, September 22, 2000 7:09 AM
To: vantage@egroups.com
Subject: Re: [Vantage] Monitoring Late Materials
Could I also get a copy? Thank You
>From: "Troy Funte" <tfunte@...>is
>Reply-To: vantage@egroups.com
>To: <vantage@egroups.com>
>Subject: Re: [Vantage] Monitoring Late Materials
>Date: Fri, 15 Sep 2000 17:32:59 -0400
>
>Would you mind sending me a copy also?
>
>Troy Funte
>Liberty Electronics
>tfunte@...
> ----- Original Message -----
> From: Steve Lewis
> To: vantage@egroups.com
> Sent: Friday, September 15, 2000 3:01 PM
> Subject: RE: [Vantage] Monitoring Late Materials
>
>
>
> My Groups | vantage Main Page
>
>
> Steve - I would be interested in this report. My E-mail address
> S.Lewis@...you run
> Thanks,
> Steve Lewis
>
> -
>
> We have created a "Shortage Report in Report Builder. Whenever
> the report it gives you all outstanding activities on a vantagejob.
> This includes every operation not completed to the expectedquantity and
> purchased materials not issued to the job to the expectedquantity. All
> completed items operations and material issues are deleted fromthe job.
> Let me know if you are interested and I could probably forwardyou a
> copy of the report.Files,
>
> Steve
>
>
>
>
> We no longer allow attachments to files. To access/share Report
>please go to the following link:http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time youtry it, go
>to www.egroups.com, login and be sure to save your password, chooseMy
>Groups, choose Vantage, then choose Files. If you save thepassword, the
>link above will work the next time you try it.)_________________________________________________________________________
>
>
>
>
>[Non-text portions of this message have been removed]
>
Get Your Private, Free E-mail from MSN Hotmail at
http://www.hotmail.com
Share information about yourself, create your own public profile at
http://profiles.msn.com
We no longer allow attachments to files. To access/share Report
Files,
please go to the following link:
http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try
it, go to
www.egroups.com, login and be sure to save your password, choose My
Groups,
choose Vantage, then choose Files. If you save the password, the
link above
will work the next time you try it.)
________________________________________________________________________
________________________________________________________________________
Message: 3
Date: Fri, 22 Sep 2000 08:03:09 -0500
From: Todd Caughey <caugheyt@...>
Subject: RE: Epicor Perspectives Customer Conference - Views
I have always found the conferences to be a bargain in terms of
education.
Most of the sessions and especially the workshops offer almost all
of the
material of the full day classes but at a much faster pace.
Classroom
training usually bores the heck out of me and seems to drag
on-and-on
whereas the conference sessions give me enough hints and ideas to
figure
things out for myself. On top of this there is the session notes
book which
I refer to often all year long. Finally the #1 benefit is actually
meeting
people face to face and discussing issues much as on this board but
in
real-time. In terms of value to the company I describe it to our
VP-Finance
as the best education bang for the buck we can get.
That said, I am deeply disappointed at the location this year and
the
incredible arrogance of Epicor to book it at a place that costs $185
a
night. Most of their clientele are very cost conscious
manufacturing
operations. To top it off the hotel is now booked solid for the
night of
the 16th and they are sending people 3-1/2 miles away to a sister
property
(Rancho Las Palmas). Someone miscalaculated the turnout plus the
vendors &
exhibitors. This time of year Las Vegas is also expensive (highest
season
throughout Southwest I was told) so it would not have been much
better. I
would like to see a return to late-April or May and at least move it
back to
Las Vegas if not somewhere more central in North America. I'm sure
it saves
Epicor a lot of airfare to be so close to their HQ but this is a
"user"
conference after all. I'm flying in-out of Las Vegas and driving
down for
half the cost of flying to Palm Springs and the money I save on
Wednesday
night at the Marriott Desert Springs will pay for three nights in
Las Vegas.
-Todd Caughey
Harvey Vogel Mfg. Co.
Woodbury, MN
-----Original Message-----
From: Martin Nijdam [mailto:martinn@...]
Sent: Thursday, September 21, 2000 3:15 PM
To: Oneliste (E-mail)
Subject: [Vantage] Epicor Perspectives Customer Conference -
Registration
Reminder
<http://click.egroups.com/1/9155/13/_/411782/_/969567465/>
<http://adimg.egroups.com/img/9155/13/_/411782/_/969567465/468x60_hate_searc
hing5.gif>
<http://www.egroups.com/> eGroups My
<http://www.egroups.com/mygroups> Groups | vantage Main
<http://www.egroups.com/group/vantage> Page | Start a new
<http://click.egroups.com/1/8150/13/_/411782/_/969567466/> group!
Since we have been live on vantage for a year now, I've never been
to this
users conference. I was looking forward to it but I've looked at the
course
description and it does seem to me that this seminar is not worth
+2000$
U.S. (not including airfare)? I think this will be a very hard sell
to my
boss. Does anybody go to these conferences? How do you see the
return on
investment?
Renaissance Esmerelda Resort, (800)468-3571, $185 per night
Marriott Las Palmas Resort , (800)468-3571, $185 per night
Miramonte Resort, (800)237-2926, $185 per night
Indian Wells Resort, (800)248-3220, $149 per night
The conference fee is $1,095, which includes entrance to all
sessions, labs
and trade shows, as well as a reception on Sunday night; breakfast,
lunch, a
Martin Nijdam (Jr. Ing.)
Suss Woodcraft Int'l
(514) 363-3565
We no longer allow attachments to files. To access/share Report
Files,
please go to the following link:
http://www.egroups.com/files/vantage/
<http://www.egroups.com/files/vantage/>
(Note: If this link does not work for you the first time you try
it, go to
www.egroups.com, login and be sure to save your password, choose My
Groups,
choose Vantage, then choose Files. If you save the password, the
link above
will work the next time you try it.)
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 4
Date: Fri, 22 Sep 2000 08:12:53 -0500
From: "Eddy, Warren" <warren.eddy@...>
Subject: RE: Epicor Perspectives Customer Conference - Views
This will be my first Vantage conference, however, in the past our
company
has sent several persons. Due to the nearly doubled (I'm told) fee
and the
high cost of hotel/travel the decision was made to only send one
person. If
the conference cost and hotel/travel would be more reasonable I'm
fairly
certain we would be sending more than one person.
Warren Eddy
National Tube Form LLC
warren.eddy@...
219 478-2363 ext 217
-----Original Message-----
From: Todd Caughey [mailto:caugheyt@...]
Sent: Friday, September 22, 2000 8:03 AM
To: 'vantage@egroups.com'
Subject: RE: [Vantage] Epicor Perspectives Customer Conference -
Views
-------------------------- eGroups Sponsor
-------------------------~-~>
Your family still won't know what you do. At least they'll know
where.
The resources, brainpower & breadth of opportunities at Microsoft
are
unmatched. The only question is are you ready for that kind of
impact?
http://click.egroups.com/1/9223/13/_/411782/_/969627801/
---------------------------------------------------------------------_->
I have always found the conferences to be a bargain in terms of
education.
Most of the sessions and especially the workshops offer almost all
of the
material of the full day classes but at a much faster pace.
Classroom
training usually bores the heck out of me and seems to drag
on-and-on
whereas the conference sessions give me enough hints and ideas to
figure
things out for myself. On top of this there is the session notes
book which
I refer to often all year long. Finally the #1 benefit is actually
meeting
people face to face and discussing issues much as on this board but
in
real-time. In terms of value to the company I describe it to our
VP-Finance
as the best education bang for the buck we can get.
That said, I am deeply disappointed at the location this year and
the
incredible arrogance of Epicor to book it at a place that costs $185
a
night. Most of their clientele are very cost conscious
manufacturing
operations. To top it off the hotel is now booked solid for the
night of
the 16th and they are sending people 3-1/2 miles away to a sister
property
(Rancho Las Palmas). Someone miscalaculated the turnout plus the
vendors &
exhibitors. This time of year Las Vegas is also expensive (highest
season
throughout Southwest I was told) so it would not have been much
better. I
would like to see a return to late-April or May and at least move it
back to
Las Vegas if not somewhere more central in North America. I'm sure
it saves
Epicor a lot of airfare to be so close to their HQ but this is a
"user"
conference after all. I'm flying in-out of Las Vegas and driving
down for
half the cost of flying to Palm Springs and the money I save on
Wednesday
night at the Marriott Desert Springs will pay for three nights in
Las Vegas.
-Todd Caughey
Harvey Vogel Mfg. Co.
Woodbury, MN
-----Original Message-----
From: Martin Nijdam [mailto:martinn@...]
Sent: Thursday, September 21, 2000 3:15 PM
To: Oneliste (E-mail)
Subject: [Vantage] Epicor Perspectives Customer Conference -
Registration
Reminder
<http://click.egroups.com/1/9155/13/_/411782/_/969567465/>
<http://adimg.egroups.com/img/9155/13/_/411782/_/969567465/468x60_hate_searc
hing5.gif>
<http://www.egroups.com/> eGroups My
<http://www.egroups.com/mygroups> Groups | vantage Main
<http://www.egroups.com/group/vantage> Page | Start a new
<http://click.egroups.com/1/8150/13/_/411782/_/969567466/> group!
Since we have been live on vantage for a year now, I've never been
to this
users conference. I was looking forward to it but I've looked at the
course
description and it does seem to me that this seminar is not worth
+2000$
U.S. (not including airfare)? I think this will be a very hard sell
to my
boss. Does anybody go to these conferences? How do you see the
return on
investment?
Renaissance Esmerelda Resort, (800)468-3571, $185 per night
Marriott Las Palmas Resort , (800)468-3571, $185 per night
Miramonte Resort, (800)237-2926, $185 per night
Indian Wells Resort, (800)248-3220, $149 per night
The conference fee is $1,095, which includes entrance to all
sessions, labs
and trade shows, as well as a reception on Sunday night; breakfast,
lunch, a
Martin Nijdam (Jr. Ing.)
Suss Woodcraft Int'l
(514) 363-3565
We no longer allow attachments to files. To access/share Report
Files,
please go to the following link:
http://www.egroups.com/files/vantage/
<http://www.egroups.com/files/vantage/>
(Note: If this link does not work for you the first time you try
it, go to
www.egroups.com, login and be sure to save your password, choose My
Groups,
choose Vantage, then choose Files. If you save the password, the
link above
will work the next time you try it.)
[Non-text portions of this message have been removed]
We no longer allow attachments to files. To access/share Report
Files,
please go to the following link:
http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try
it, go to
www.egroups.com, login and be sure to save your password, choose My
Groups,
choose Vantage, then choose Files. If you save the password, the
link above
will work the next time you try it.)
________________________________________________________________________
________________________________________________________________________
Message: 5
Date: Fri, 22 Sep 2000 13:38:57 -0000
From: SGARRISON@...
Subject: AP INVOICES
I needed some help regarding posting A/P invoices. I am trying to
post employee expense reports, C.O.D. shipments and non PO items in
vantage. I need these postings to hit our job costing module. Has
anyone been able to post non-PO invoices to Vantage and hit job
cost.
Thank you
Shawn Garrison
Accountant
Tamglass Tempering Systems, Inc.
________________________________________________________________________
________________________________________________________________________
Message: 6
Date: Fri, 22 Sep 2000 09:54:50 -0400
From: sarah.vareschi@...
Subject: RE: AP INVOICES
The only way I have found to get a non-po invoice to hit a job is to
do a
miscellaneous receipt against the job and then invoice that receipt.
It is
several additional steps than our old system had, because before you
can
receive against the job, there has to be a line item on the job to
receive
to.
If anyone knows of a different way, I, too, would be happy to hear
it!
Sarah
________________________________________________________________________
________________________________________________________________________
Message: 7
Date: Fri, 22 Sep 2000 10:14:04 -0400
From: Marvin Myers <marvin@...>
Subject: Report Builder
I am working with the part bin report that is posted on the One
List. I
can't seem to get
the report to print 0 on hand qty records. Does anyone know why this
happens. I know that
I am probably overlooking something simple.
Marvin R. Myers
Computer Systems Engineer
marvin@...
717-252-3667 ext. 231
________________________________________________________________________
________________________________________________________________________
Message: 8
Date: Fri, 22 Sep 2000 09:21:26 -0500
From: "Wilmoth, Deb" <Deb@...>
Subject: RE: AP INVOICES
I use Job Cost Adjustments to get those costs to the job. The bad
news
there is that it creates an inventory adjustment and I have to write
a
journal entry to reverse $ to the proper G/L ledger accounts because
I
firmly believe in $0 balance in suspense type accounts. Sometimes
we get
close to 20 such adjustments per month. Not user friendly.
I would prefer to see a feature added to A/P whereby we can hit
those costs
to the job from A/P. Calvin, are we way too late in making
requests for
version 6? All the freight bills and trips to the hardware store
for
miscellaneous hardware are two perfect examples. Creating PO's for
freight
- Arrrrghhhhh!!!! Yet that is a big ticket item that should not be
overlooked on the cost of a job.
Deb @ Reeder & Kline Machine Company, Inc.
The only way I have found to get a non-po invoice to hit a job is to
do a
miscellaneous receipt against the job and then invoice that receipt.
It is
several additional steps than our old system had, because before you
can
receive against the job, there has to be a line item on the job to
receive
to.
If anyone knows of a different way, I, too, would be happy to hear
it!
Sarah
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 9
Date: Fri, 22 Sep 2000 07:39:04 -0700
From: "Kimberly Maxwell" <kimberly.maxwell@...>
Subject: RE: Report Builder
Marvin,
We just worked with Vantage support concerning the issue of
receiving 0
onhand qty for another report and this was the response:
Unfortunately, a part number has to have a least 1 in its quantity
to be
able to pull info for a report. Report cannot be run. Best way to
simulate
is to run a report of all inventory, also run a report of inventory
with
qtys on hand and compare the two.
Hope this helps! We thought we were over looking something simple
also! If
anyone knows some way to get that answer, please pass it on.
Kimberly Maxwell
Westwood Precision, Inc.
PH: 425-347-1303 Ext. 41
Fax: 425-353-8945
email: kimberly.maxwell@...
www.westwoodprecision.com
-----Original Message-----
I am working with the part bin report that is posted on the One
List. I
can't seem to get
the report to print 0 on hand qty records. Does anyone know why this
happens. I know that
I am probably overlooking something simple.
Marvin R. Myers
Computer Systems Engineer
marvin@...
717-252-3667 ext. 231
________________________________________________________________________
________________________________________________________________________
Message: 10
Date: Fri, 22 Sep 2000 11:00:08 -0400
From: "Tim Care" <ecfmis@...>
Subject: Re: Report Builder
If you start with the part table, and then join to
the Part Bin table with a left out join, you will
get all parts, whether or not they have an entry
in the Part Bin Table. The ones that do not
have a Part Bin record will have a ? for unknown
value. You can then set the unknown value to show
0 instead of ?.
Tim Care
Electro Chemical Finishing
----- Original Message -----
From: "Marvin Myers" <marvin@...>
To: <vantage@egroups.com>
Sent: Friday, September 22, 2000 10:14 AM
Subject: [Vantage] Report Builder
>
> I am working with the part bin report that is posted on the One
List. I
> can't seem to get
> the report to print 0 on hand qty records. Does anyone know why
this
> happens. I know that
> I am probably overlooking something simple.
>
>
> Marvin R. Myers
> Computer Systems Engineer
> marvin@...
> 717-252-3667 ext. 231
>
>
> We no longer allow attachments to files. To access/share Report
Files,
please go to the following link:
http://www.egroups.com/files/vantage/
> (Note: If this link does not work for you the first time you try
it, go
to www.egroups.com, login and be sure to save your password, choose
My
Groups, choose Vantage, then choose Files. If you save the
password, the
link above will work the next time you try it.)
>
________________________________________________________________________
________________________________________________________________________
Message: 11
Date: Fri, 22 Sep 2000 08:05:54 -0700
From: Lydia Coffman <lcoffman@...>
Subject: RE: Epicor Perspectives Customer Conference - Views
I've always found the conferences to be very beneficial-meeting the
Vantage
people as well as all of the other users, plus the session materials
are a
handy reference.
I too am very disappointed with the location this year-even though
the hotel
cost is nearly the same (wasn't it $169 at Caesar's last year?), and
even
though I will drive since it is only 120+ miles, for people not
based in
Southern California, it looked like a hardship from the get-go.
Other large
organizations (SHRM - the society of human resource managers) have
their
conferences where the largest number of "members" -- read users -
can
attend for the least amount of hassle and air fair.
Flying in to Palm Springs from other parts of the country is just
impractical
-----Original Message-----
From: Eddy, Warren [mailto:warren.eddy@...]
Sent: Friday, September 22, 2000 6:13 AM
To: 'vantage@egroups.com'
Subject: RE: [Vantage] Epicor Perspectives Customer
Conference -
Views
This will be my first Vantage conference, however, in the past our
company
has sent several persons. Due to the nearly doubled (I'm told) fee
and the
high cost of hotel/travel the decision was made to only send one
person. If
the conference cost and hotel/travel would be more reasonable I'm
fairly
certain we would be sending more than one person.
Warren Eddy
National Tube Form LLC
warren.eddy@...
219 478-2363 ext 217
-----Original Message-----
From: Todd Caughey [mailto:caugheyt@...]
Sent: Friday, September 22, 2000 8:03 AM
To: 'vantage@egroups.com'
Subject: RE: [Vantage] Epicor Perspectives Customer Conference -
Views
-------------------------- eGroups Sponsor
-------------------------~-~>
Your family still won't know what you do. At least they'll know
where.
The resources, brainpower & breadth of opportunities at Microsoft
are
unmatched. The only question is are you ready for that kind of
impact?
http://click.egroups.com/1/9223/13/_/411782/_/969627801/
---------------------------------------------------------------------_->
I have always found the conferences to be a bargain in terms of
education.
Most of the sessions and especially the workshops offer almost all
of the
material of the full day classes but at a much faster pace.
Classroom
training usually bores the heck out of me and seems to drag
on-and-on
whereas the conference sessions give me enough hints and ideas to
figure
things out for myself. On top of this there is the session notes
book which
I refer to often all year long. Finally the #1 benefit is actually
meeting
people face to face and discussing issues much as on this board but
in
real-time. In terms of value to the company I describe it to our
VP-Finance
as the best education bang for the buck we can get.
That said, I am deeply disappointed at the location this year and
the
incredible arrogance of Epicor to book it at a place that costs $185
a
night. Most of their clientele are very cost conscious
manufacturing
operations. To top it off the hotel is now booked solid for the
night of
the 16th and they are sending people 3-1/2 miles away to a sister
property
(Rancho Las Palmas). Someone miscalaculated the turnout plus the
vendors &
exhibitors. This time of year Las Vegas is also expensive (highest
season
throughout Southwest I was told) so it would not have been much
better. I
would like to see a return to late-April or May and at least move it
back to
Las Vegas if not somewhere more central in North America. I'm sure
it saves
Epicor a lot of airfare to be so close to their HQ but this is a
"user"
conference after all. I'm flying in-out of Las Vegas and driving
down for
half the cost of flying to Palm Springs and the money I save on
Wednesday
night at the Marriott Desert Springs will pay for three nights in
Las Vegas.
-Todd Caughey
Harvey Vogel Mfg. Co.
Woodbury, MN
-----Original Message-----
From: Martin Nijdam [mailto:martinn@...]
Sent: Thursday, September 21, 2000 3:15 PM
To: Oneliste (E-mail)
Subject: [Vantage] Epicor Perspectives Customer Conference -
Registration
Reminder
<http://click.egroups.com/1/9155/13/_/411782/_/969567465/>
<http://adimg.egroups.com/img/9155/13/_/411782/_/969567465/468x60_hate_searc
hing5.gif>
<http://www.egroups.com/> eGroups My
<http://www.egroups.com/mygroups> Groups | vantage Main
<http://www.egroups.com/group/vantage> Page | Start a new
<http://click.egroups.com/1/8150/13/_/411782/_/969567466/> group!
Since we have been live on vantage for a year now, I've never been
to this
users conference. I was looking forward to it but I've looked at the
course
description and it does seem to me that this seminar is not worth
+2000$
U.S. (not including airfare)? I think this will be a very hard sell
to my
boss. Does anybody go to these conferences? How do you see the
return on
investment?
Renaissance Esmerelda Resort, (800)468-3571, $185 per night
Marriott Las Palmas Resort , (800)468-3571, $185 per night
Miramonte Resort, (800)237-2926, $185 per night
Indian Wells Resort, (800)248-3220, $149 per night
The conference fee is $1,095, which includes entrance to all
sessions, labs
and trade shows, as well as a reception on Sunday night; breakfast,
lunch, a
Martin Nijdam (Jr. Ing.)
Suss Woodcraft Int'l
(514) 363-3565
We no longer allow attachments to files. To access/share Report
Files,
please go to the following link:
http://www.egroups.com/files/vantage/
<http://www.egroups.com/files/vantage/>
(Note: If this link does not work for you the first time you try
it, go to
www.egroups.com, login and be sure to save your password, choose My
Groups,
choose Vantage, then choose Files. If you save the password, the
link above
will work the next time you try it.)
[Non-text portions of this message have been removed]
We no longer allow attachments to files. To access/share Report
Files,
please go to the following link:
http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try
it, go to
www.egroups.com, login and be sure to save your password, choose My
Groups,
choose Vantage, then choose Files. If you save the password, the
link above
will work the next time you try it.)
We no longer allow attachments to files. To access/share Report
Files,
please go to the following link:
http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try
it, go to
www.egroups.com, login and be sure to save your password, choose My
Groups,
choose Vantage, then choose Files. If you save the password, the
link above
will work the next time you try it.)
________________________________________________________________________
________________________________________________________________________
Message: 12
Date: Fri, 22 Sep 2000 11:17:17 -0400
From: "Terry Williams" <tlw@...>
Subject: RE: Epicor Perspectives Customer Conference - Views
We've traditionally sent a minimum of two persons (last year three),
however
due to the high cost we made a decision to boycott this year.
-----Original Message-----
From: Eddy, Warren [mailto:warren.eddy@...]
Sent: Friday, September 22, 2000 9:13 AM
To: 'vantage@egroups.com'
Subject: RE: [Vantage] Epicor Perspectives Customer
Conference - Views
This will be my first Vantage conference, however, in the past our
company
has sent several persons. Due to the nearly doubled (I'm told) fee
and the
high cost of hotel/travel the decision was made to only send one
person. If
the conference cost and hotel/travel would be more reasonable I'm
fairly
certain we would be sending more than one person.
Warren Eddy
National Tube Form LLC
warren.eddy@...
219 478-2363 ext 217
-----Original Message-----
From: Todd Caughey [mailto:caugheyt@...]
Sent: Friday, September 22, 2000 8:03 AM
To: 'vantage@egroups.com'
Subject: RE: [Vantage] Epicor Perspectives Customer Conference -
Views
-------------------------- eGroups Sponsor
-------------------------~-~>
Your family still won't know what you do. At least they'll know
where.
The resources, brainpower & breadth of opportunities at Microsoft
are
unmatched. The only question is are you ready for that kind of
impact?
http://click.egroups.com/1/9223/13/_/411782/_/969627801/
---------------------------------------------------------------------_->
I have always found the conferences to be a bargain in terms of
education.
Most of the sessions and especially the workshops offer almost all
of the
material of the full day classes but at a much faster pace.
Classroom
training usually bores the heck out of me and seems to drag
on-and-on
whereas the conference sessions give me enough hints and ideas to
figure
things out for myself. On top of this there is the session notes
book which
I refer to often all year long. Finally the #1 benefit is actually
meeting
people face to face and discussing issues much as on this board but
in
real-time. In terms of value to the company I describe it to our
VP-Finance
as the best education bang for the buck we can get.
That said, I am deeply disappointed at the location this year and
the
incredible arrogance of Epicor to book it at a place that costs $185
a
night. Most of their clientele are very cost conscious
manufacturing
operations. To top it off the hotel is now booked solid for the
night of
the 16th and they are sending people 3-1/2 miles away to a sister
property
(Rancho Las Palmas). Someone miscalaculated the turnout plus the
vendors &
exhibitors. This time of year Las Vegas is also expensive (highest
season
throughout Southwest I was told) so it would not have been much
better. I
would like to see a return to late-April or May and at least move it
back to
Las Vegas if not somewhere more central in North America. I'm sure
it saves
Epicor a lot of airfare to be so close to their HQ but this is a
"user"
conference after all. I'm flying in-out of Las Vegas and driving
down for
half the cost of flying to Palm Springs and the money I save on
Wednesday
night at the Marriott Desert Springs will pay for three nights in
Las Vegas.
-Todd Caughey
Harvey Vogel Mfg. Co.
Woodbury, MN
-----Original Message-----
From: Martin Nijdam [mailto:martinn@...]
Sent: Thursday, September 21, 2000 3:15 PM
To: Oneliste (E-mail)
Subject: [Vantage] Epicor Perspectives Customer Conference -
Registration
Reminder
<http://click.egroups.com/1/9155/13/_/411782/_/969567465/>
<http://adimg.egroups.com/img/9155/13/_/411782/_/969567465/468x60_hate_searc
hing5.gif>
<http://www.egroups.com/> eGroups My
<http://www.egroups.com/mygroups> Groups | vantage Main
<http://www.egroups.com/group/vantage> Page | Start a new
<http://click.egroups.com/1/8150/13/_/411782/_/969567466/> group!
Since we have been live on vantage for a year now, I've never been
to this
users conference. I was looking forward to it but I've looked at the
course
description and it does seem to me that this seminar is not worth
+2000$
U.S. (not including airfare)? I think this will be a very hard sell
to my
boss. Does anybody go to these conferences? How do you see the
return on
investment?
Renaissance Esmerelda Resort, (800)468-3571, $185 per night
Marriott Las Palmas Resort , (800)468-3571, $185 per night
Miramonte Resort, (800)237-2926, $185 per night
Indian Wells Resort, (800)248-3220, $149 per night
The conference fee is $1,095, which includes entrance to all
sessions, labs
and trade shows, as well as a reception on Sunday night; breakfast,
lunch, a
Martin Nijdam (Jr. Ing.)
Suss Woodcraft Int'l
(514) 363-3565
We no longer allow attachments to files. To access/share Report
Files,
please go to the following link:
http://www.egroups.com/files/vantage/
<http://www.egroups.com/files/vantage/>
(Note: If this link does not work for you the first time you try
it, go to
www.egroups.com, login and be sure to save your password, choose My
Groups,
choose Vantage, then choose Files. If you save the password, the
link above
will work the next time you try it.)
[Non-text portions of this message have been removed]
We no longer allow attachments to files. To access/share Report
Files,
please go to the following link:
http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try
it, go to
www.egroups.com, login and be sure to save your password, choose My
Groups,
choose Vantage, then choose Files. If you save the password, the
link above
will work the next time you try it.)
We no longer allow attachments to files. To access/share Report
Files,
please go to the following link:
http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try
it, go to
www.egroups.com, login and be sure to save your password, choose My
Groups,
choose Vantage, then choose Files. If you save the password, the
link above
will work the next time you try it.)
________________________________________________________________________
________________________________________________________________________
Message: 13
Date: Fri, 22 Sep 2000 10:23:16 -0500
From: "Reilly, Rhonda" <rreilly@...>
Subject: RE: Epicor Perspectives Customer Conference - Views
I had thought that we were one of the few companies not attending
this year
due to the location and cost. We are located in Mobile Al and
estimated the
trip to cost close to $5000 each person. We could not justify that
expense
even though the conferences are a great opportunity.
I attend last year and gain so much from the people I met and the
ideas
shared. I sincerely hope that there is still enough of you going
that that
is not lost. Hopefully I will see you at the next one.
Rhonda Reilly
Offshore Tool and Energy
________________________________________________________________________
________________________________________________________________________
Message: 14
Date: Fri, 22 Sep 2000 11:49:24 -0400
From: sarah.vareschi@...
Subject: Memo Field on Report Builder Report
HELP!
I remember a long time ago there was a discussion on this list
regarding
printing out memos. Unfortunately, this was before we archived
messages,
and at the time I wasn't using memos, so I didn't pay much
attention. Now,
however, my controller has been suing AR memos to keep track of
customers
reasons for not paying, etc. He DESPERATELY wants to see this on a
report,
and I can not figure out how to accomplish this. I remember someone
coming
up with a solution and I would love it if that person (I don't
remember who)
would share it with me!!!
Thanks!!!
Sarah
________________________________________________________________________
________________________________________________________________________
Message: 15
Date: Fri, 22 Sep 2000 10:29:10 -0500
From: Nora Story <Nora_Story@...>
Subject: RE: AP INVOICES
We do it the same way as Sarah does. I do think the capability to
add
expenses to a job through AP without a PO is a feature that was
addressed
in Cairo. Can any Beta testers confirm? Thanks.
Nora
The only way I have found to get a non-po invoice to hit a job is to
do a
miscellaneous receipt against the job and then invoice that receipt.
It is
several additional steps than our old system had, because before you
can
receive against the job, there has to be a line item on the job to
receive
to.
If anyone knows of a different way, I, too, would be happy to hear
it!
Sarah
________________________________________________________________________
________________________________________________________________________
Message: 16
Date: Fri, 22 Sep 2000 10:37:24 -0500
From: Nora Story <Nora_Story@...>
Subject: RE: Epicor Perspectives Customer Conference - Views
We have found that flying into Las Vegas, San Diego, Los Angeles,
etc. and
then connecting to Palm Springs gets a much lower fare. The travel
agent
referenced in the Perspectives brochure also provided a much lower
airfare
rate on American direct to Palm Springs. Check with them, too
(800-356-0424). Be sure to reference Epicor to get the negotiated
lower
airfare rates.
-----Original Message-----
From: Lydia Coffman [SMTP:lcoffman@...]
Flying in to Palm Springs from other parts of the country is just
impractical
________________________________________________________________________
________________________________________________________________________
Message: 17
Date: Fri, 22 Sep 2000 10:55:40 -0500
From: Todd Anderson <tanderson@...>
Subject: Shop Floor PC's
To Group:
A while back the subject of protecting shop floor PC's from
hazardous
environments came up.
If you goto http://www.raritan.com/products_c5r.htmland you will see
a
product called "Cat 5 reach".
For $ 545.00 list you can buy a pair of boxes that can be linked
with up to
650 feet of cat 5 cable to allow you to place your PC's in an office
near
the floor. ( They also have a fiber version that's good for 3,000
feet )
What you end up with is x number of pcs in an office with type 5
wire
running out into your shop where you still have monitors, keyboards,
and
mice.
Granted this doesn't protect your monitors, keyboards, and mice but
monitors
seem to hold up very well ( they just get dirty ) and keyboards and
mice are
cheap these days.
FYI
Todd Anderson
________________________________________________________________________
________________________________________________________________________
Message: 18
Date: Fri, 22 Sep 2000 11:59:16 -0400
From: Wayne Cox <wmc@...>
Subject: Re: Memo Field on Report Builder Report
At 11:49 AM 9/22/2000 , you wrote:
>printing out memos. .... wants to see this on a report,
>and I can not figure out how to accomplish this. I remember
someone coming
Double click on the field in RB; in the alignment properties, you
can
select word wrap. I think you may have to manually increase the
height of
the record band line; also maybe play with the field width and
format.
-Wayne
________________________________________________________________________
________________________________________________________________________
Message: 19
Date: Fri, 22 Sep 2000 12:17:51 -0400
From: sarah.vareschi@...
Subject: RE: Memo Field on Report Builder Report
Wayne, my problem is getting the memo table to link to the
InvcHeader table,
so I can see all my late, open Invoices, and any memos regarding
them.
________________________________________________________________________
________________________________________________________________________
Message: 20
Date: 22 Sep 2000 16:27:14 -0000
From: <vantage@egroups.com>
Subject: New file uploaded to vantage
Hello,
This email message is a notification to let you know that
a file has been uploaded to the Files area of the vantage
group.
File : /memos.PRL
Uploaded by : shirleyg@...
Description : prints out all memo files (check the filter)
You can access this file at the URL
http://www.egroups.com/files/vantage/memos%2EPRL
To learn more about eGroups file sharing, please visit
http://www.egroups.com/help/files.html
Regards,
shirleyg@...
________________________________________________________________________
________________________________________________________________________
Message: 21
Date: Fri, 22 Sep 2000 12:24:54 -0400
From: "Shirley Graver" <shirleyg@...>
Subject: RE: Memo Field on Report Builder Report
If anyone is interested we use memos quite a bit. I have a report
that is
formated and works well. I will upload this report to the report
builder
list in e groups under "MEMOS".
Shirley H. Graver
Systems Administrator
Rubber Associates Inc. (Certified to QS9000/ISO9002)
Cleveland/Akron, Ohio
________________________________________________________________________
________________________________________________________________________
Message: 22
Date: Fri, 22 Sep 2000 12:47:57 -0400
From: Wayne Cox <wmc@...>
Subject: RE: Memo Field on Report Builder Report
At 12:24 PM 9/22/2000 , you wrote:
>If anyone is interested we use memos quite a bit. I have a report
that is
>formated and works well. I will upload this report to the report
builder
I think she needs to join Memo and InvcHead. Unfortunately, the
join
fields are different data types. Memo.Key1= string, and
InvcHead.InvoiceNbr = integer. I suggested Crystal might do it if
you use
one of the type conversion functions as the join field. Can R.B. do
that
at all?
-Wayne
________________________________________________________________________
________________________________________________________________________
Message: 23
Date: Fri, 22 Sep 2000 13:10:04 -0400
From: sarah.vareschi@...
Subject: RE: Memo Field on Report Builder Report
Thanks, Wayne. After some playing, I have a solution using Access
by
converting the data type of the string field in memo.key1 to a text,
and
then joining that to the invoicehead table.
However, I hate using access for my reports because it goes through
ODBC,
which means
(1) it is very unstable in vantage 4
(2) I have to run it myself or install ODBC on each users machine
that needs
the report, which opens potential data issues if users figure out
how to
modify data
So, if anybody knows a way to get in Report Builder to link the memo
to the
invoice header, I would be very grateful!
Sarah
________________________________________________________________________
________________________________________________________________________
Message: 24
Date: Fri, 22 Sep 2000 19:24:17 -0000
From: jeniwilson@...
Subject: Vacation
Why can't you create two paychecks for one employee during the same
check run? One would be for the current week and the other for
example could be vacation for the next week. We came from Classic
and you could do this. Now, I do a separate check run for one
vacation check. We are on 3.0. Thanks.
________________________________________________________________________
________________________________________________________________________
Message: 25
Date: Fri, 22 Sep 2000 14:28:57 -0500
From: "Wilmoth, Deb" <Deb@...>
Subject: RE: Vacation
We do vacation checks the same way you do. It would be great to be
able to
generate two or more separate checks, one for vacation, for the same
individual in one check run. We don't add vacation hours to the
regular
paycheck hours because that would adversely affect tax withholding
dollars.
Deb @ Reeder & Kline Machine Company, Inc.
-----Original Message-----
From: jeniwilson@... [mailto:jeniwilson@...]
Why can't you create two paychecks for one employee during the same
check run? One would be for the current week and the other for
example could be vacation for the next week. We came from Classic
and you could do this. Now, I do a separate check run for one
vacation check. We are on 3.0. Thanks.
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
We no longer allow attachments to files. To access/share Report Files,
please go to the following link: http://www.egroups.com/files/vantage/
(Note: If this link does not work for you the first time you try it, go to
www.egroups.com, login and be sure to save your password, choose My Groups,
choose Vantage, then choose Files. If you save the password, the link above
will work the next time you try it.)