Report quantity in MES

system · May 6, 2009, 6:51am

In January, 408 was slated for March (latest work is now early June).

I would think '409 in June' would likely really be September.

Rob

--- On Tue, 5/5/09, jimlmm24521 <jimlmm24521@...> wrote:
From: jimlmm24521 <jimlmm24521@...>
Subject: [Vantage] Re: report quantity in MES
To: vantage@yahoogroups.com
Date: Tuesday, May 5, 2009, 2:32 PM

--- In vantage@yahoogroups .com, "jimlmm24521" <jimlmm24521@ ...> wrote:

>oops service pack 409

> no subassemblies. I am told that it will be addressed in service pack 490 to be released end of June.--- In vantage@yahoogroups .com, "bpbuechler" <pbuechler@> wrote:

> >

> > Do you have subassemblies in your MOM?

> >

> > If so...there is a bug where the last operation in the subassembly is checked no matter what the Labor Reporting Resource Auto Move flag is set to.

> >

> > Not to mention...I think it took them until 8.03.407 (reported back on 8.0.810) to fix the darn issue of the TO WHSE and TO BIN not pulling into their Dataview from the Labor Reporting Resource but instead it was pulling from the RG. Very frustratigng when you basically have to customize the heck out of it just to get it to work (ugh!)

> > Thanks

> > Patty Buechler

> >

> > --- In vantage@yahoogroups .com, Robert Brown <robertb_versa@ > wrote:

> > >

> > >

> > > This has been an irritating (as it totally unacceptable that such and easily detected bug gets into released software) intermittent bug since 305 (through 405). It can be overcome with .NET customization but upgrades can break the resolving cusotmization and require some recoding (as they seem to change the order of the apps BO/method and resulting field update invocation at random).

> > >

> > > Welcome to Vantage,

> > >

> > > Rob Brown

> > >

> > >

> > >

> > > --- On Mon, 5/4/09, jimlmm24521 <jimlmm24521@ > wrote:

> > >

> > > From: jimlmm24521 <jimlmm24521@ >

> > > Subject: [Vantage] report quantity in MES

> > > To: vantage@yahoogroups .com

> > > Date: Monday, May 4, 2009, 11:04 AM

> > >

> > >

> > >

> > >

> > >

> > >

> > >

> > >

> > > Our facility moves castings frequently during the day and we want to use the report quantity function in MES. This is going to allow realtime visiblity of where castings actually are in the process. There is an issue with this in that when reporting quantity, the complete box is automatically checking itself. The workaround is to end activity and report quantity but then you would have to start production again. Was wondering if others have noticed this and what you are doing to get around this. It is supposed to be correct in June 2009.

> > >

> >

>

system · May 4, 2009, 11:05am

Our facility moves castings frequently during the day and we want to use the report quantity function in MES. This is going to allow realtime visiblity of where castings actually are in the process. There is an issue with this in that when reporting quantity, the complete box is automatically checking itself. The workaround is to end activity and report quantity but then you would have to start production again. Was wondering if others have noticed this and what you are doing to get around this. It is supposed to be correct in June 2009.

system · May 4, 2009, 11:09am

What version are you on? We're not experiencing anything like that
here.

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg.com/>

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of jimlmm24521
Sent: Monday, May 04, 2009 10:05 AM
To: vantage@yahoogroups.com
Subject: [Vantage] report quantity in MES

Our facility moves castings frequently during the day and we want to use
the report quantity function in MES. This is going to allow realtime
visiblity of where castings actually are in the process. There is an
issue with this in that when reporting quantity, the complete box is
automatically checking itself. The workaround is to end activity and
report quantity but then you would have to start production again. Was
wondering if others have noticed this and what you are doing to get
around this. It is supposed to be correct in June 2009.

[Non-text portions of this message have been removed]

system · May 4, 2009, 12:02pm

This has been an irritating (as it totally unacceptable that such and easily detected bug gets into released software) intermittent bug since 305 (through 405). It can be overcome with .NET customization but upgrades can break the resolving cusotmization and require some recoding (as they seem to change the order of the apps BO/method and resulting field update invocation at random).

Welcome to Vantage,

Rob Brown

--- On Mon, 5/4/09, jimlmm24521 <jimlmm24521@...> wrote:

From: jimlmm24521 <jimlmm24521@...>
Subject: [Vantage] report quantity in MES
To: vantage@yahoogroups.com
Date: Monday, May 4, 2009, 11:04 AM

Our facility moves castings frequently during the day and we want to use the report quantity function in MES. This is going to allow realtime visiblity of where castings actually are in the process. There is an issue with this in that when reporting quantity, the complete box is automatically checking itself. The workaround is to end activity and report quantity but then you would have to start production again. Was wondering if others have noticed this and what you are doing to get around this. It is supposed to be correct in June 2009.

system · May 4, 2009, 1:15pm

--- In vantage@yahoogroups.com, "Rob Bucek" <rbucek@...> wrote:

>We are on 8.03.407
> What version are you on? We're not experiencing anything like that
> here.
>
>
>
> Rob Bucek
>
> Manufacturing Engineer
>
> PH: 715-284-5376 ext 311
>
> FAX: 715-284-4084
>
> <http://www.dsmfg.com/>
>
> (Click the logo to view our site)
>
>
>
> ________________________________
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
> Of jimlmm24521
> Sent: Monday, May 04, 2009 10:05 AM
> To: vantage@yahoogroups.com
> Subject: [Vantage] report quantity in MES
>
>
>
>
>
> Our facility moves castings frequently during the day and we want to use
> the report quantity function in MES. This is going to allow realtime
> visiblity of where castings actually are in the process. There is an
> issue with this in that when reporting quantity, the complete box is
> automatically checking itself. The workaround is to end activity and
> report quantity but then you would have to start production again. Was
> wondering if others have noticed this and what you are doing to get
> around this. It is supposed to be correct in June 2009.
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

system · May 5, 2009, 10:46am

Do you have subassemblies in your MOM?

If so...there is a bug where the last operation in the subassembly is checked no matter what the Labor Reporting Resource Auto Move flag is set to.

Not to mention...I think it took them until 8.03.407 (reported back on 8.0.810) to fix the darn issue of the TO WHSE and TO BIN not pulling into their Dataview from the Labor Reporting Resource but instead it was pulling from the RG. Very frustratigng when you basically have to customize the heck out of it just to get it to work (ugh!)
Thanks
Patty Buechler

--- In vantage@yahoogroups.com, Robert Brown <robertb_versa@...> wrote:
>
>
> This has been an irritating (as it totally unacceptable that such and easily detected bug gets into released software) intermittent bug since 305 (through 405). It can be overcome with .NET customization but upgrades can break the resolving cusotmization and require some recoding (as they seem to change the order of the apps BO/method and resulting field update invocation at random).
>
> Welcome to Vantage,
>
> Rob Brown
>
>
>
> --- On Mon, 5/4/09, jimlmm24521 <jimlmm24521@...> wrote:
>
> From: jimlmm24521 <jimlmm24521@...>
> Subject: [Vantage] report quantity in MES
> To: vantage@yahoogroups.com
> Date: Monday, May 4, 2009, 11:04 AM
>
>
>
>
>
>
>
>
> Our facility moves castings frequently during the day and we want to use the report quantity function in MES. This is going to allow realtime visiblity of where castings actually are in the process. There is an issue with this in that when reporting quantity, the complete box is automatically checking itself. The workaround is to end activity and report quantity but then you would have to start production again. Was wondering if others have noticed this and what you are doing to get around this. It is supposed to be correct in June 2009.
>

system · May 5, 2009, 1:32pm

no subassemblies. I am told that it will be addressed in service pack 490 to be released end of June.--- In vantage@yahoogroups.com, "bpbuechler" <pbuechler@...> wrote:

>
> Do you have subassemblies in your MOM?
>
> If so...there is a bug where the last operation in the subassembly is checked no matter what the Labor Reporting Resource Auto Move flag is set to.
>
> Not to mention...I think it took them until 8.03.407 (reported back on 8.0.810) to fix the darn issue of the TO WHSE and TO BIN not pulling into their Dataview from the Labor Reporting Resource but instead it was pulling from the RG. Very frustratigng when you basically have to customize the heck out of it just to get it to work (ugh!)
> Thanks
> Patty Buechler
>
> --- In vantage@yahoogroups.com, Robert Brown <robertb_versa@> wrote:
> >
> >
> > This has been an irritating (as it totally unacceptable that such and easily detected bug gets into released software) intermittent bug since 305 (through 405). It can be overcome with .NET customization but upgrades can break the resolving cusotmization and require some recoding (as they seem to change the order of the apps BO/method and resulting field update invocation at random).
> >
> > Welcome to Vantage,
> >
> > Rob Brown
> >
> >
> >
> > --- On Mon, 5/4/09, jimlmm24521 <jimlmm24521@> wrote:
> >
> > From: jimlmm24521 <jimlmm24521@>
> > Subject: [Vantage] report quantity in MES
> > To: vantage@yahoogroups.com
> > Date: Monday, May 4, 2009, 11:04 AM
> >
> >
> >
> >
> >
> >
> >
> >
> > Our facility moves castings frequently during the day and we want to use the report quantity function in MES. This is going to allow realtime visiblity of where castings actually are in the process. There is an issue with this in that when reporting quantity, the complete box is automatically checking itself. The workaround is to end activity and report quantity but then you would have to start production again. Was wondering if others have noticed this and what you are doing to get around this. It is supposed to be correct in June 2009.
> >
>

system · May 5, 2009, 2:33pm

--- In vantage@yahoogroups.com, "jimlmm24521" <jimlmm24521@...> wrote:

>oops service pack 409
> no subassemblies. I am told that it will be addressed in service pack 490 to be released end of June.--- In vantage@yahoogroups.com, "bpbuechler" <pbuechler@> wrote:
> >
> > Do you have subassemblies in your MOM?
> >
> > If so...there is a bug where the last operation in the subassembly is checked no matter what the Labor Reporting Resource Auto Move flag is set to.
> >
> > Not to mention...I think it took them until 8.03.407 (reported back on 8.0.810) to fix the darn issue of the TO WHSE and TO BIN not pulling into their Dataview from the Labor Reporting Resource but instead it was pulling from the RG. Very frustratigng when you basically have to customize the heck out of it just to get it to work (ugh!)
> > Thanks
> > Patty Buechler
> >
> > --- In vantage@yahoogroups.com, Robert Brown <robertb_versa@> wrote:
> > >
> > >
> > > This has been an irritating (as it totally unacceptable that such and easily detected bug gets into released software) intermittent bug since 305 (through 405). It can be overcome with .NET customization but upgrades can break the resolving cusotmization and require some recoding (as they seem to change the order of the apps BO/method and resulting field update invocation at random).
> > >
> > > Welcome to Vantage,
> > >
> > > Rob Brown
> > >
> > >
> > >
> > > --- On Mon, 5/4/09, jimlmm24521 <jimlmm24521@> wrote:
> > >
> > > From: jimlmm24521 <jimlmm24521@>
> > > Subject: [Vantage] report quantity in MES
> > > To: vantage@yahoogroups.com
> > > Date: Monday, May 4, 2009, 11:04 AM
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Our facility moves castings frequently during the day and we want to use the report quantity function in MES. This is going to allow realtime visiblity of where castings actually are in the process. There is an issue with this in that when reporting quantity, the complete box is automatically checking itself. The workaround is to end activity and report quantity but then you would have to start production again. Was wondering if others have noticed this and what you are doing to get around this. It is supposed to be correct in June 2009.
> > >
> >
>