SC Choice Configuration

Yahoo Archive
1
/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse/dta:result/EngWorkBen
chDataSet/ECOOpDtl/OprSeq = 10 and
/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse/dta:result/EngWorkBen
chDataSet/ECOOpDtl/OpDtlSeq = 20



I have this in a choice does it mean that if any record has an oprseq = 10
and any record has an opdtlseq = 20 it will come back true.



Or does it mean if there is a record where oprseq = 10 and opdtlseq = 20 it
will come back true?



~Charlie

_____

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Charlie Wilson
Sent: Friday, April 03, 2009 10:34 AM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] SC Choice Configuration



How can I set this up to check each opdtl and adjust the ones that apply?

Sub workflow???

~Charlie

_____

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf Of
Rob Bucek
Sent: Thursday, April 02, 2009 3:58 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: RE: [Vantage] SC Choice Configuration

I may have inadvertently corrupted the IIS configuration while I was
messing around trying to set up a web service to launch ssis
packages.... Fortunately SC is on a stand alone server so I can restore
to a state before I messed with it. My hunches are that permissions are
messed up somehow.

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg. <http://www.dsmfg. <http://www.dsmfg.com/> com/> com/>

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
Of Brian W. Spolarich
Sent: Thursday, April 02, 2009 2:36 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: RE: [Vantage] SC Choice Configuration

I would export/backup my config, uninstall 8.2, install 8.3, and be
done. It wasn't a big deal when I did it.

--
Brian W. Spolarich ~ Manager, Information Services ~ Advanced Photonix /
Picometrix
bspolarich@advanced <mailto:bspolarich%40advancedphotonix.com> photonix.com
<mailto:bspolarich%40advancedphotonix.com> ~ 734-864-5618 ~
www.advancedphotonix.com

-----Original Message-----
From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com> ] On
Behalf Of Rob Bucek
Sent: Thursday, April 02, 2009 3:05 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] SC Choice Configuration

I tried to upgrade to 8.3 yesterday but failed miserably. Something
about not being able to schedule installation of app pools...sigh...its
only a 3 week wait for support...

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg. <http://www.dsmfg. <http://www.dsmfg.com/> com/> com/
<http://www.dsmfg.
<http://www.dsmfg. <http://www.dsmfg.com/> com/> com/> >

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com> ] On
Behalf
Of Charlie Wilson
Sent: Thursday, April 02, 2009 1:29 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] SC Choice Configuration

Getting to version 8.3 makes this amazingly easy, I would look into
upgrading!

~Charlie

_____

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> ] On
Behalf Of
Rob Bucek
Sent: Tuesday, March 31, 2009 2:28 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] SC Choice Configuration

Yeah, I wasn't really suggesting that might necessarily work for you, as
it was somewhat of a lame workaround in the first place!

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg. <http://www.dsmfg. <http://www.dsmfg.
<http://www.dsmfg.com/> com/> com/
<http://www.dsmfg. <http://www.dsmfg. <http://www.dsmfg.com/> com/> com/> <
http://www.dsmfg. <http://www.dsmfg. <http://www.dsmfg.com/> com/> com/
<http://www.dsmfg.
<http://www.dsmfg. <http://www.dsmfg.com/> com/> com/> > >
com/>

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
Of Charlie Wilson
Sent: Tuesday, March 31, 2009 1:25 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: RE: [Vantage] SC Choice Configuration

I thought about doing that too but it doesn't really work in this case
because I could have records like this:

OpSeq OpDtlSeq

10 10

20 10

20 20

And if set the xpaths in this order:

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprDtlSeq = 20

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprSeq = 10

They would both come up true because there is a record that satisfies
each
statement when in fact I really only want it to come up true if their
was a
record where opseq = 10 and opdtlseq = 20

~Charlie

_____

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com> ] On
Behalf Of
Rob Bucek
Sent: Tuesday, March 31, 2009 2:11 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] SC Choice Configuration

Id be interested in that one as well. In the past to get around that I
put two choice elements in a row to check multiple conditions. It would
be nice to be able to do it in one.

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg. <http://www.dsmfg. <http://www.dsmfg.
<http://www.dsmfg. <http://www.dsmfg.com/> com/> com/
<http://www.dsmfg. <http://www.dsmfg. <http://www.dsmfg.com/> com/> com/>
<http://www.dsmfg. <http://www.dsmfg. <http://www.dsmfg.com/> com/> com/
<http://www.dsmfg.
<http://www.dsmfg. <http://www.dsmfg.com/> com/> com/> > > com/
<http://www.dsmfg. <http://www.dsmfg. <http://www.dsmfg.
<http://www.dsmfg.com/> com/> com/
<http://www.dsmfg. <http://www.dsmfg. <http://www.dsmfg.com/> com/> com/> <
http://www.dsmfg. <http://www.dsmfg. <http://www.dsmfg.com/> com/> com/
<http://www.dsmfg.
<http://www.dsmfg. <http://www.dsmfg.com/> com/> com/> > >
com/> >
com/>

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
Of Charlie Wilson
Sent: Tuesday, March 31, 2009 12:58 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: [Vantage] SC Choice Configuration

I need to configure a choice in service connect to check two fields to
see
if there are two specific values is this the correct way to set the
xpath
expression?

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprDtlSeq = 20 and OprSeq = 10]

Cuz it doesn't seem to be working

I'm working on changing Resources on part methods.

I need Flow to update the resource 20 on operation 10 only if it exsist.
But
methods could have multiple operations.

Any help would be greatly appreciated.

~Charlie

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups. <http://groups.
<http://groups.yahoo.com/group/vantage/files/>
yahoo.com/group/vantage/files/>
yahoo.com/group/vantage/files/.
<http://groups. <http://groups.
<http://groups.yahoo.com/group/vantage/files/>
yahoo.com/group/vantage/files/>
yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups. <http://groups.
<http://groups.yahoo.com/group/vantage/messages>
yahoo.com/group/vantage/messages>
yahoo.com/group/vantage/messages
<http://groups. <http://groups.
<http://groups.yahoo.com/group/vantage/messages>
yahoo.com/group/vantage/messages>
yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups. <http://groups.
<http://groups.yahoo.com/group/vantage/linksYahoo>
yahoo.com/group/vantage/linksYahoo>
yahoo.com/group/vantage/linksYahoo
<http://groups. <http://groups.
<http://groups.yahoo.com/group/vantage/linksYahoo>
yahoo.com/group/vantage/linksYahoo>
yahoo.com/group/vantage/linksYahoo> ! Groups Links

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
2
I need to configure a choice in service connect to check two fields to see
if there are two specific values is this the correct way to set the xpath
expression?



/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWorkBen
chDataSet/ECOOpDtl/OprDtlSeq = 20 and OprSeq = 10]



Cuz it doesn't seem to be working



I'm working on changing Resources on part methods.



I need Flow to update the resource 20 on operation 10 only if it exsist. But
methods could have multiple operations.



Any help would be greatly appreciated.



~Charlie





[Non-text portions of this message have been removed]
3
Id be interested in that one as well. In the past to get around that I
put two choice elements in a row to check multiple conditions. It would
be nice to be able to do it in one.



Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg.com/>

(Click the logo to view our site)



________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Charlie Wilson
Sent: Tuesday, March 31, 2009 12:58 PM
To: vantage@yahoogroups.com
Subject: [Vantage] SC Choice Configuration



I need to configure a choice in service connect to check two fields to
see
if there are two specific values is this the correct way to set the
xpath
expression?

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprDtlSeq = 20 and OprSeq = 10]

Cuz it doesn't seem to be working

I'm working on changing Resources on part methods.

I need Flow to update the resource 20 on operation 10 only if it exsist.
But
methods could have multiple operations.

Any help would be greatly appreciated.

~Charlie

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
4
I thought about doing that too but it doesn't really work in this case
because I could have records like this:



OpSeq OpDtlSeq

10 10

20 10

20 20



And if set the xpaths in this order:



/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWorkBen
chDataSet/ECOOpDtl/OprDtlSeq = 20



/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWorkBen
chDataSet/ECOOpDtl/OprSeq = 10



They would both come up true because there is a record that satisfies each
statement when in fact I really only want it to come up true if their was a
record where opseq = 10 and opdtlseq = 20



~Charlie

_____

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Rob Bucek
Sent: Tuesday, March 31, 2009 2:11 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] SC Choice Configuration



Id be interested in that one as well. In the past to get around that I
put two choice elements in a row to check multiple conditions. It would
be nice to be able to do it in one.

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg <http://www.dsmfg.com/> com/>

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
Of Charlie Wilson
Sent: Tuesday, March 31, 2009 12:58 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: [Vantage] SC Choice Configuration

I need to configure a choice in service connect to check two fields to
see
if there are two specific values is this the correct way to set the
xpath
expression?

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprDtlSeq = 20 and OprSeq = 10]

Cuz it doesn't seem to be working

I'm working on changing Resources on part methods.

I need Flow to update the resource 20 on operation 10 only if it exsist.
But
methods could have multiple operations.

Any help would be greatly appreciated.

~Charlie

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
5
Yeah, I wasn't really suggesting that might necessarily work for you, as
it was somewhat of a lame workaround in the first place!



Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg.com/>

(Click the logo to view our site)



________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Charlie Wilson
Sent: Tuesday, March 31, 2009 1:25 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] SC Choice Configuration



I thought about doing that too but it doesn't really work in this case
because I could have records like this:

OpSeq OpDtlSeq

10 10

20 10

20 20

And if set the xpaths in this order:

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprDtlSeq = 20

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprSeq = 10

They would both come up true because there is a record that satisfies
each
statement when in fact I really only want it to come up true if their
was a
record where opseq = 10 and opdtlseq = 20

~Charlie

_____

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf Of
Rob Bucek
Sent: Tuesday, March 31, 2009 2:11 PM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] SC Choice Configuration

Id be interested in that one as well. In the past to get around that I
put two choice elements in a row to check multiple conditions. It would
be nice to be able to do it in one.

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg <http://www.dsmfg.com/ <http://www.dsmfg.com/> >
com/>

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
Of Charlie Wilson
Sent: Tuesday, March 31, 2009 12:58 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: [Vantage] SC Choice Configuration

I need to configure a choice in service connect to check two fields to
see
if there are two specific values is this the correct way to set the
xpath
expression?

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprDtlSeq = 20 and OprSeq = 10]

Cuz it doesn't seem to be working

I'm working on changing Resources on part methods.

I need Flow to update the resource 20 on operation 10 only if it exsist.
But
methods could have multiple operations.

Any help would be greatly appreciated.

~Charlie

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
6
It only makes sense that you should be able to build logic into the phrase
some how I just need to know the syntax.



~Charlie

_____

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Rob Bucek
Sent: Tuesday, March 31, 2009 2:28 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] SC Choice Configuration



Yeah, I wasn't really suggesting that might necessarily work for you, as
it was somewhat of a lame workaround in the first place!

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg <http://www.dsmfg.com/> com/>

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
Of Charlie Wilson
Sent: Tuesday, March 31, 2009 1:25 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: RE: [Vantage] SC Choice Configuration

I thought about doing that too but it doesn't really work in this case
because I could have records like this:

OpSeq OpDtlSeq

10 10

20 10

20 20

And if set the xpaths in this order:

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprDtlSeq = 20

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprSeq = 10

They would both come up true because there is a record that satisfies
each
statement when in fact I really only want it to come up true if their
was a
record where opseq = 10 and opdtlseq = 20

~Charlie

_____

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com> ] On
Behalf Of
Rob Bucek
Sent: Tuesday, March 31, 2009 2:11 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] SC Choice Configuration

Id be interested in that one as well. In the past to get around that I
put two choice elements in a row to check multiple conditions. It would
be nice to be able to do it in one.

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg <http://www.dsmfg <http://www.dsmfg.com/> com/
<http://www.dsmfg <http://www.dsmfg.com/> com/> >
com/>

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
Of Charlie Wilson
Sent: Tuesday, March 31, 2009 12:58 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: [Vantage] SC Choice Configuration

I need to configure a choice in service connect to check two fields to
see
if there are two specific values is this the correct way to set the
xpath
expression?

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprDtlSeq = 20 and OprSeq = 10]

Cuz it doesn't seem to be working

I'm working on changing Resources on part methods.

I need Flow to update the resource 20 on operation 10 only if it exsist.
But
methods could have multiple operations.

Any help would be greatly appreciated.

~Charlie

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
7
How about evaluate each field to produce a true/ false result and logically AND the results....

--- In vantage@yahoogroups.com, "Rob Bucek" <rbucek@...> wrote:
>
> Yeah, I wasn't really suggesting that might necessarily work for you, as
> it was somewhat of a lame workaround in the first place!
>
>
>
> Rob Bucek
>
> Manufacturing Engineer
>
> PH: 715-284-5376 ext 311
>
> FAX: 715-284-4084
>
> <http://www.dsmfg.com/>
>
> (Click the logo to view our site)
>
>
>
> ________________________________
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
> Of Charlie Wilson
> Sent: Tuesday, March 31, 2009 1:25 PM
> To: vantage@yahoogroups.com
> Subject: RE: [Vantage] SC Choice Configuration
>
>
>
> I thought about doing that too but it doesn't really work in this case
> because I could have records like this:
>
> OpSeq OpDtlSeq
>
> 10 10
>
> 20 10
>
> 20 20
>
> And if set the xpaths in this order:
>
> /msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
> kBen
> chDataSet/ECOOpDtl/OprDtlSeq = 20
>
> /msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
> kBen
> chDataSet/ECOOpDtl/OprSeq = 10
>
> They would both come up true because there is a record that satisfies
> each
> statement when in fact I really only want it to come up true if their
> was a
> record where opseq = 10 and opdtlseq = 20
>
> ~Charlie
>
> _____
>
> From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> [mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
> Behalf Of
> Rob Bucek
> Sent: Tuesday, March 31, 2009 2:11 PM
> To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
> Subject: RE: [Vantage] SC Choice Configuration
>
> Id be interested in that one as well. In the past to get around that I
> put two choice elements in a row to check multiple conditions. It would
> be nice to be able to do it in one.
>
> Rob Bucek
>
> Manufacturing Engineer
>
> PH: 715-284-5376 ext 311
>
> FAX: 715-284-4084
>
> <http://www.dsmfg <http://www.dsmfg.com/ <http://www.dsmfg.com/> >
> com/>
>
> (Click the logo to view our site)
>
> ________________________________
>
> From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
> [mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
> Behalf
> Of Charlie Wilson
> Sent: Tuesday, March 31, 2009 12:58 PM
> To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
> Subject: [Vantage] SC Choice Configuration
>
> I need to configure a choice in service connect to check two fields to
> see
> if there are two specific values is this the correct way to set the
> xpath
> expression?
>
> /msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
> kBen
> chDataSet/ECOOpDtl/OprDtlSeq = 20 and OprSeq = 10]
>
> Cuz it doesn't seem to be working
>
> I'm working on changing Resources on part methods.
>
> I need Flow to update the resource 20 on operation 10 only if it exsist.
> But
> methods could have multiple operations.
>
> Any help would be greatly appreciated.
>
> ~Charlie
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
8
How exactly would you set this up?



~Charlie

_____

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
bw2868bond
Sent: Tuesday, March 31, 2009 2:33 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: SC Choice Configuration



How about evaluate each field to produce a true/ false result and logically
AND the results....

--- In vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com, "Rob
Bucek" <rbucek@...> wrote:
>
> Yeah, I wasn't really suggesting that might necessarily work for you, as
> it was somewhat of a lame workaround in the first place!
>
>
>
> Rob Bucek
>
> Manufacturing Engineer
>
> PH: 715-284-5376 ext 311
>
> FAX: 715-284-4084
>
> <http://www.dsmfg <http://www.dsmfg.com/> com/>
>
> (Click the logo to view our site)
>
>
>
> ________________________________
>
> From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
> Of Charlie Wilson
> Sent: Tuesday, March 31, 2009 1:25 PM
> To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
> Subject: RE: [Vantage] SC Choice Configuration
>
>
>
> I thought about doing that too but it doesn't really work in this case
> because I could have records like this:
>
> OpSeq OpDtlSeq
>
> 10 10
>
> 20 10
>
> 20 20
>
> And if set the xpaths in this order:
>
> /msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
> kBen
> chDataSet/ECOOpDtl/OprDtlSeq = 20
>
> /msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
> kBen
> chDataSet/ECOOpDtl/OprSeq = 10
>
> They would both come up true because there is a record that satisfies
> each
> statement when in fact I really only want it to come up true if their
> was a
> record where opseq = 10 and opdtlseq = 20
>
> ~Charlie
>
> _____
>
> From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
> [mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com> ] On
> Behalf Of
> Rob Bucek
> Sent: Tuesday, March 31, 2009 2:11 PM
> To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
> Subject: RE: [Vantage] SC Choice Configuration
>
> Id be interested in that one as well. In the past to get around that I
> put two choice elements in a row to check multiple conditions. It would
> be nice to be able to do it in one.
>
> Rob Bucek
>
> Manufacturing Engineer
>
> PH: 715-284-5376 ext 311
>
> FAX: 715-284-4084
>
> <http://www.dsmfg <http://www.dsmfg <http://www.dsmfg.com/> com/
<http://www.dsmfg <http://www.dsmfg.com/> com/> >
> com/>
>
> (Click the logo to view our site)
>
> ________________________________
>
> From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
> [mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
> Behalf
> Of Charlie Wilson
> Sent: Tuesday, March 31, 2009 12:58 PM
> To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
> Subject: [Vantage] SC Choice Configuration
>
> I need to configure a choice in service connect to check two fields to
> see
> if there are two specific values is this the correct way to set the
> xpath
> expression?
>
> /msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
> kBen
> chDataSet/ECOOpDtl/OprDtlSeq = 20 and OprSeq = 10]
>
> Cuz it doesn't seem to be working
>
> I'm working on changing Resources on part methods.
>
> I need Flow to update the resource 20 on operation 10 only if it exsist.
> But
> methods could have multiple operations.
>
> Any help would be greatly appreciated.
>
> ~Charlie
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> [Non-text portions of this message have been removed]
>





[Non-text portions of this message have been removed]
9
Using the functoid palette and selecting two = functoids and a AND functoid yields this xpath

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse/dta:result/EngWorkBenchDataSet/ECOOpDtl/OprSeq = "10" and /msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse/dta:result/EngWorkBenchDataSet/ECOOpDtl/OpDtlSeq = "20"

--- In vantage@yahoogroups.com, "Charlie Wilson" <foamdesigncsw@...> wrote:
>
> How exactly would you set this up?
>
>
>
> ~Charlie
>
> _____
>
> From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
> bw2868bond
> Sent: Tuesday, March 31, 2009 2:33 PM
> To: vantage@yahoogroups.com
> Subject: [Vantage] Re: SC Choice Configuration
>
>
>
> How about evaluate each field to produce a true/ false result and logically
> AND the results....
>
> --- In vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com, "Rob
> Bucek" <rbucek@> wrote:
> >
> > Yeah, I wasn't really suggesting that might necessarily work for you, as
> > it was somewhat of a lame workaround in the first place!
> >
> >
> >
> > Rob Bucek
> >
> > Manufacturing Engineer
> >
> > PH: 715-284-5376 ext 311
> >
> > FAX: 715-284-4084
> >
> > <http://www.dsmfg <http://www.dsmfg.com/> com/>
> >
> > (Click the logo to view our site)
> >
> >
> >
> > ________________________________
> >
> > From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
> [mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
> Behalf
> > Of Charlie Wilson
> > Sent: Tuesday, March 31, 2009 1:25 PM
> > To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
> > Subject: RE: [Vantage] SC Choice Configuration
> >
> >
> >
> > I thought about doing that too but it doesn't really work in this case
> > because I could have records like this:
> >
> > OpSeq OpDtlSeq
> >
> > 10 10
> >
> > 20 10
> >
> > 20 20
> >
> > And if set the xpaths in this order:
> >
> > /msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
> > kBen
> > chDataSet/ECOOpDtl/OprDtlSeq = 20
> >
> > /msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
> > kBen
> > chDataSet/ECOOpDtl/OprSeq = 10
> >
> > They would both come up true because there is a record that satisfies
> > each
> > statement when in fact I really only want it to come up true if their
> > was a
> > record where opseq = 10 and opdtlseq = 20
> >
> > ~Charlie
> >
> > _____
> >
> > From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
> <mailto:vantage%40yahoogroups.com>
> > [mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
> <mailto:vantage%40yahoogroups.com> ] On
> > Behalf Of
> > Rob Bucek
> > Sent: Tuesday, March 31, 2009 2:11 PM
> > To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
> <mailto:vantage%40yahoogroups.com>
> > Subject: RE: [Vantage] SC Choice Configuration
> >
> > Id be interested in that one as well. In the past to get around that I
> > put two choice elements in a row to check multiple conditions. It would
> > be nice to be able to do it in one.
> >
> > Rob Bucek
> >
> > Manufacturing Engineer
> >
> > PH: 715-284-5376 ext 311
> >
> > FAX: 715-284-4084
> >
> > <http://www.dsmfg <http://www.dsmfg <http://www.dsmfg.com/> com/
> <http://www.dsmfg <http://www.dsmfg.com/> com/> >
> > com/>
> >
> > (Click the logo to view our site)
> >
> > ________________________________
> >
> > From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
> > [mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
> > Behalf
> > Of Charlie Wilson
> > Sent: Tuesday, March 31, 2009 12:58 PM
> > To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
> > Subject: [Vantage] SC Choice Configuration
> >
> > I need to configure a choice in service connect to check two fields to
> > see
> > if there are two specific values is this the correct way to set the
> > xpath
> > expression?
> >
> > /msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
> > kBen
> > chDataSet/ECOOpDtl/OprDtlSeq = 20 and OprSeq = 10]
> >
> > Cuz it doesn't seem to be working
> >
> > I'm working on changing Resources on part methods.
> >
> > I need Flow to update the resource 20 on operation 10 only if it exsist.
> > But
> > methods could have multiple operations.
> >
> > Any help would be greatly appreciated.
> >
> > ~Charlie
> >
> > [Non-text portions of this message have been removed]
> >
> > [Non-text portions of this message have been removed]
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
10
How do you get to the functoid pallet in the choice it is greyed out for me.




~Charlie

_____

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
bw2868bond
Sent: Tuesday, March 31, 2009 2:51 PM
To: vantage@yahoogroups.com
Subject: [Vantage] Re: SC Choice Configuration



Using the functoid palette and selecting two = functoids and a AND functoid
yields this xpath

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse/dta:result/EngWorkBen
chDataSet/ECOOpDtl/OprSeq = "10" and
/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse/dta:result/EngWorkBen
chDataSet/ECOOpDtl/OpDtlSeq = "20"

--- In vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com, "Charlie
Wilson" <foamdesigncsw@...> wrote:
>
> How exactly would you set this up?
>
>
>
> ~Charlie
>
> _____
>
> From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf Of
> bw2868bond
> Sent: Tuesday, March 31, 2009 2:33 PM
> To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
> Subject: [Vantage] Re: SC Choice Configuration
>
>
>
> How about evaluate each field to produce a true/ false result and
logically
> AND the results....
>
> --- In vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com, "Rob
> Bucek" <rbucek@> wrote:
> >
> > Yeah, I wasn't really suggesting that might necessarily work for you, as
> > it was somewhat of a lame workaround in the first place!
> >
> >
> >
> > Rob Bucek
> >
> > Manufacturing Engineer
> >
> > PH: 715-284-5376 ext 311
> >
> > FAX: 715-284-4084
> >
> > <http://www.dsmfg <http://www.dsmfg <http://www.dsmfg.com/> com/>
com/>
> >
> > (Click the logo to view our site)
> >
> >
> >
> > ________________________________
> >
> > From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
> [mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
> Behalf
> > Of Charlie Wilson
> > Sent: Tuesday, March 31, 2009 1:25 PM
> > To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
> > Subject: RE: [Vantage] SC Choice Configuration
> >
> >
> >
> > I thought about doing that too but it doesn't really work in this case
> > because I could have records like this:
> >
> > OpSeq OpDtlSeq
> >
> > 10 10
> >
> > 20 10
> >
> > 20 20
> >
> > And if set the xpaths in this order:
> >
> > /msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
> > kBen
> > chDataSet/ECOOpDtl/OprDtlSeq = 20
> >
> > /msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
> > kBen
> > chDataSet/ECOOpDtl/OprSeq = 10
> >
> > They would both come up true because there is a record that satisfies
> > each
> > statement when in fact I really only want it to come up true if their
> > was a
> > record where opseq = 10 and opdtlseq = 20
> >
> > ~Charlie
> >
> > _____
> >
> > From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
> <mailto:vantage%40yahoogroups.com>
> > [mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
> <mailto:vantage%40yahoogroups.com> ] On
> > Behalf Of
> > Rob Bucek
> > Sent: Tuesday, March 31, 2009 2:11 PM
> > To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
> <mailto:vantage%40yahoogroups.com>
> > Subject: RE: [Vantage] SC Choice Configuration
> >
> > Id be interested in that one as well. In the past to get around that I
> > put two choice elements in a row to check multiple conditions. It would
> > be nice to be able to do it in one.
> >
> > Rob Bucek
> >
> > Manufacturing Engineer
> >
> > PH: 715-284-5376 ext 311
> >
> > FAX: 715-284-4084
> >
> > <http://www.dsmfg <http://www.dsmfg <http://www.dsmfg
<http://www.dsmfg.com/> com/> com/
> <http://www.dsmfg <http://www.dsmfg <http://www.dsmfg.com/> com/> com/>
>
> > com/>
> >
> > (Click the logo to view our site)
> >
> > ________________________________
> >
> > From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
> > [mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
> > Behalf
> > Of Charlie Wilson
> > Sent: Tuesday, March 31, 2009 12:58 PM
> > To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
> > Subject: [Vantage] SC Choice Configuration
> >
> > I need to configure a choice in service connect to check two fields to
> > see
> > if there are two specific values is this the correct way to set the
> > xpath
> > expression?
> >
> > /msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
> > kBen
> > chDataSet/ECOOpDtl/OprDtlSeq = 20 and OprSeq = 10]
> >
> > Cuz it doesn't seem to be working
> >
> > I'm working on changing Resources on part methods.
> >
> > I need Flow to update the resource 20 on operation 10 only if it exsist.
> > But
> > methods could have multiple operations.
> >
> > Any help would be greatly appreciated.
> >
> > ~Charlie
> >
> > [Non-text portions of this message have been removed]
> >
> > [Non-text portions of this message have been removed]
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
>
>
> [Non-text portions of this message have been removed]
>





[Non-text portions of this message have been removed]
11
Getting to version 8.3 makes this amazingly easy, I would look into
upgrading!



~Charlie

_____

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Rob Bucek
Sent: Tuesday, March 31, 2009 2:28 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] SC Choice Configuration



Yeah, I wasn't really suggesting that might necessarily work for you, as
it was somewhat of a lame workaround in the first place!

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg <http://www.dsmfg.com/> com/>

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
Of Charlie Wilson
Sent: Tuesday, March 31, 2009 1:25 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: RE: [Vantage] SC Choice Configuration

I thought about doing that too but it doesn't really work in this case
because I could have records like this:

OpSeq OpDtlSeq

10 10

20 10

20 20

And if set the xpaths in this order:

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprDtlSeq = 20

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprSeq = 10

They would both come up true because there is a record that satisfies
each
statement when in fact I really only want it to come up true if their
was a
record where opseq = 10 and opdtlseq = 20

~Charlie

_____

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com> ] On
Behalf Of
Rob Bucek
Sent: Tuesday, March 31, 2009 2:11 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] SC Choice Configuration

Id be interested in that one as well. In the past to get around that I
put two choice elements in a row to check multiple conditions. It would
be nice to be able to do it in one.

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg <http://www.dsmfg <http://www.dsmfg.com/> com/
<http://www.dsmfg <http://www.dsmfg.com/> com/> >
com/>

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
Of Charlie Wilson
Sent: Tuesday, March 31, 2009 12:58 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: [Vantage] SC Choice Configuration

I need to configure a choice in service connect to check two fields to
see
if there are two specific values is this the correct way to set the
xpath
expression?

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprDtlSeq = 20 and OprSeq = 10]

Cuz it doesn't seem to be working

I'm working on changing Resources on part methods.

I need Flow to update the resource 20 on operation 10 only if it exsist.
But
methods could have multiple operations.

Any help would be greatly appreciated.

~Charlie

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
12
I tried to upgrade to 8.3 yesterday but failed miserably. Something
about not being able to schedule installation of app pools...sigh...its
only a 3 week wait for support...



Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg.com/>

(Click the logo to view our site)



________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Charlie Wilson
Sent: Thursday, April 02, 2009 1:29 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] SC Choice Configuration



Getting to version 8.3 makes this amazingly easy, I would look into
upgrading!

~Charlie

_____

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf Of
Rob Bucek
Sent: Tuesday, March 31, 2009 2:28 PM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] SC Choice Configuration

Yeah, I wasn't really suggesting that might necessarily work for you, as
it was somewhat of a lame workaround in the first place!

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg <http://www.dsmfg.com/ <http://www.dsmfg.com/> >
com/>

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
Of Charlie Wilson
Sent: Tuesday, March 31, 2009 1:25 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: RE: [Vantage] SC Choice Configuration

I thought about doing that too but it doesn't really work in this case
because I could have records like this:

OpSeq OpDtlSeq

10 10

20 10

20 20

And if set the xpaths in this order:

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprDtlSeq = 20

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprSeq = 10

They would both come up true because there is a record that satisfies
each
statement when in fact I really only want it to come up true if their
was a
record where opseq = 10 and opdtlseq = 20

~Charlie

_____

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com> ] On
Behalf Of
Rob Bucek
Sent: Tuesday, March 31, 2009 2:11 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] SC Choice Configuration

Id be interested in that one as well. In the past to get around that I
put two choice elements in a row to check multiple conditions. It would
be nice to be able to do it in one.

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg <http://www.dsmfg <http://www.dsmfg.com/
<http://www.dsmfg.com/> > com/
<http://www.dsmfg <http://www.dsmfg.com/ <http://www.dsmfg.com/> >
com/> >
com/>

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
Of Charlie Wilson
Sent: Tuesday, March 31, 2009 12:58 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: [Vantage] SC Choice Configuration

I need to configure a choice in service connect to check two fields to
see
if there are two specific values is this the correct way to set the
xpath
expression?

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprDtlSeq = 20 and OprSeq = 10]

Cuz it doesn't seem to be working

I'm working on changing Resources on part methods.

I need Flow to update the resource 20 on operation 10 only if it exsist.
But
methods could have multiple operations.

Any help would be greatly appreciated.

~Charlie

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
13
It went flawlessly for me.



~Charlie

_____

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Rob Bucek
Sent: Thursday, April 02, 2009 3:05 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] SC Choice Configuration



I tried to upgrade to 8.3 yesterday but failed miserably. Something
about not being able to schedule installation of app pools...sigh...its
only a 3 week wait for support...

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg <http://www.dsmfg.com/> com/>

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
Of Charlie Wilson
Sent: Thursday, April 02, 2009 1:29 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: RE: [Vantage] SC Choice Configuration

Getting to version 8.3 makes this amazingly easy, I would look into
upgrading!

~Charlie

_____

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com> ] On
Behalf Of
Rob Bucek
Sent: Tuesday, March 31, 2009 2:28 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] SC Choice Configuration

Yeah, I wasn't really suggesting that might necessarily work for you, as
it was somewhat of a lame workaround in the first place!

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg <http://www.dsmfg <http://www.dsmfg.com/> com/
<http://www.dsmfg <http://www.dsmfg.com/> com/> >
com/>

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
Of Charlie Wilson
Sent: Tuesday, March 31, 2009 1:25 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: RE: [Vantage] SC Choice Configuration

I thought about doing that too but it doesn't really work in this case
because I could have records like this:

OpSeq OpDtlSeq

10 10

20 10

20 20

And if set the xpaths in this order:

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprDtlSeq = 20

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprSeq = 10

They would both come up true because there is a record that satisfies
each
statement when in fact I really only want it to come up true if their
was a
record where opseq = 10 and opdtlseq = 20

~Charlie

_____

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com> ] On
Behalf Of
Rob Bucek
Sent: Tuesday, March 31, 2009 2:11 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] SC Choice Configuration

Id be interested in that one as well. In the past to get around that I
put two choice elements in a row to check multiple conditions. It would
be nice to be able to do it in one.

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg <http://www.dsmfg <http://www.dsmfg
<http://www.dsmfg.com/> com/
<http://www.dsmfg <http://www.dsmfg.com/> com/> > com/
<http://www.dsmfg <http://www.dsmfg <http://www.dsmfg.com/> com/
<http://www.dsmfg <http://www.dsmfg.com/> com/> >
com/> >
com/>

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
Of Charlie Wilson
Sent: Tuesday, March 31, 2009 12:58 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: [Vantage] SC Choice Configuration

I need to configure a choice in service connect to check two fields to
see
if there are two specific values is this the correct way to set the
xpath
expression?

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprDtlSeq = 20 and OprSeq = 10]

Cuz it doesn't seem to be working

I'm working on changing Resources on part methods.

I need Flow to update the resource 20 on operation 10 only if it exsist.
But
methods could have multiple operations.

Any help would be greatly appreciated.

~Charlie

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
14
I would export/backup my config, uninstall 8.2, install 8.3, and be done. It wasn't a big deal when I did it.

--
Brian W. Spolarich ~ Manager, Information Services ~ Advanced Photonix / Picometrix
    bspolarich@... ~ 734-864-5618 ~ www.advancedphotonix.com


-----Original Message-----
From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of Rob Bucek
Sent: Thursday, April 02, 2009 3:05 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] SC Choice Configuration

I tried to upgrade to 8.3 yesterday but failed miserably. Something
about not being able to schedule installation of app pools...sigh...its
only a 3 week wait for support...



Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg.com/>

(Click the logo to view our site)



________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Charlie Wilson
Sent: Thursday, April 02, 2009 1:29 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] SC Choice Configuration



Getting to version 8.3 makes this amazingly easy, I would look into
upgrading!

~Charlie

_____

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf Of
Rob Bucek
Sent: Tuesday, March 31, 2009 2:28 PM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] SC Choice Configuration

Yeah, I wasn't really suggesting that might necessarily work for you, as
it was somewhat of a lame workaround in the first place!

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg <http://www.dsmfg.com/ <http://www.dsmfg.com/> >
com/>

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
Of Charlie Wilson
Sent: Tuesday, March 31, 2009 1:25 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: RE: [Vantage] SC Choice Configuration

I thought about doing that too but it doesn't really work in this case
because I could have records like this:

OpSeq OpDtlSeq

10 10

20 10

20 20

And if set the xpaths in this order:

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprDtlSeq = 20

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprSeq = 10

They would both come up true because there is a record that satisfies
each
statement when in fact I really only want it to come up true if their
was a
record where opseq = 10 and opdtlseq = 20

~Charlie

_____

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com> ] On
Behalf Of
Rob Bucek
Sent: Tuesday, March 31, 2009 2:11 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] SC Choice Configuration

Id be interested in that one as well. In the past to get around that I
put two choice elements in a row to check multiple conditions. It would
be nice to be able to do it in one.

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg <http://www.dsmfg <http://www.dsmfg.com/
<http://www.dsmfg.com/> > com/
<http://www.dsmfg <http://www.dsmfg.com/ <http://www.dsmfg.com/> >
com/> >
com/>

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
Of Charlie Wilson
Sent: Tuesday, March 31, 2009 12:58 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: [Vantage] SC Choice Configuration

I need to configure a choice in service connect to check two fields to
see
if there are two specific values is this the correct way to set the
xpath
expression?

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprDtlSeq = 20 and OprSeq = 10]

Cuz it doesn't seem to be working

I'm working on changing Resources on part methods.

I need Flow to update the resource 20 on operation 10 only if it exsist.
But
methods could have multiple operations.

Any help would be greatly appreciated.

~Charlie

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]



------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder and Crystal Reports and other 'goodies', please goto: http://groups.yahoo.com/group/vantage/files/.
(2) To search through old msg's goto: http://groups.yahoo.com/group/vantage/messages
(3) To view links to Vendors that provide Vantage services goto: http://groups.yahoo.com/group/vantage/linksYahoo! Groups Links
15
Rockin! Im sure I was the malignant variable in the equation. Maybe ill
take another run at it tomorrow.



Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg.com/>

(Click the logo to view our site)



________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Charlie Wilson
Sent: Thursday, April 02, 2009 2:31 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] SC Choice Configuration



It went flawlessly for me.

~Charlie

_____

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf Of
Rob Bucek
Sent: Thursday, April 02, 2009 3:05 PM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] SC Choice Configuration

I tried to upgrade to 8.3 yesterday but failed miserably. Something
about not being able to schedule installation of app pools...sigh...its
only a 3 week wait for support...

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg <http://www.dsmfg.com/ <http://www.dsmfg.com/> >
com/>

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
Of Charlie Wilson
Sent: Thursday, April 02, 2009 1:29 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: RE: [Vantage] SC Choice Configuration

Getting to version 8.3 makes this amazingly easy, I would look into
upgrading!

~Charlie

_____

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com> ] On
Behalf Of
Rob Bucek
Sent: Tuesday, March 31, 2009 2:28 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] SC Choice Configuration

Yeah, I wasn't really suggesting that might necessarily work for you, as
it was somewhat of a lame workaround in the first place!

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg <http://www.dsmfg <http://www.dsmfg.com/
<http://www.dsmfg.com/> > com/
<http://www.dsmfg <http://www.dsmfg.com/ <http://www.dsmfg.com/> >
com/> >
com/>

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
Of Charlie Wilson
Sent: Tuesday, March 31, 2009 1:25 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: RE: [Vantage] SC Choice Configuration

I thought about doing that too but it doesn't really work in this case
because I could have records like this:

OpSeq OpDtlSeq

10 10

20 10

20 20

And if set the xpaths in this order:

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprDtlSeq = 20

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprSeq = 10

They would both come up true because there is a record that satisfies
each
statement when in fact I really only want it to come up true if their
was a
record where opseq = 10 and opdtlseq = 20

~Charlie

_____

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com> ] On
Behalf Of
Rob Bucek
Sent: Tuesday, March 31, 2009 2:11 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] SC Choice Configuration

Id be interested in that one as well. In the past to get around that I
put two choice elements in a row to check multiple conditions. It would
be nice to be able to do it in one.

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg <http://www.dsmfg <http://www.dsmfg
<http://www.dsmfg.com/ <http://www.dsmfg.com/> > com/
<http://www.dsmfg <http://www.dsmfg.com/ <http://www.dsmfg.com/> >
com/> > com/
<http://www.dsmfg <http://www.dsmfg <http://www.dsmfg.com/
<http://www.dsmfg.com/> > com/
<http://www.dsmfg <http://www.dsmfg.com/ <http://www.dsmfg.com/> >
com/> >
com/> >
com/>

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
Of Charlie Wilson
Sent: Tuesday, March 31, 2009 12:58 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: [Vantage] SC Choice Configuration

I need to configure a choice in service connect to check two fields to
see
if there are two specific values is this the correct way to set the
xpath
expression?

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprDtlSeq = 20 and OprSeq = 10]

Cuz it doesn't seem to be working

I'm working on changing Resources on part methods.

I need Flow to update the resource 20 on operation 10 only if it exsist.
But
methods could have multiple operations.

Any help would be greatly appreciated.

~Charlie

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]
16
I may have inadvertently corrupted the IIS configuration while I was
messing around trying to set up a web service to launch ssis
packages.... Fortunately SC is on a stand alone server so I can restore
to a state before I messed with it. My hunches are that permissions are
messed up somehow.



Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg.com/>

(Click the logo to view our site)



________________________________

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf
Of Brian W. Spolarich
Sent: Thursday, April 02, 2009 2:36 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] SC Choice Configuration



I would export/backup my config, uninstall 8.2, install 8.3, and be
done. It wasn't a big deal when I did it.

--
Brian W. Spolarich ~ Manager, Information Services ~ Advanced Photonix /
Picometrix
bspolarich@...
<mailto:bspolarich%40advancedphotonix.com> ~ 734-864-5618 ~
www.advancedphotonix.com

-----Original Message-----
From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf Of Rob Bucek
Sent: Thursday, April 02, 2009 3:05 PM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] SC Choice Configuration

I tried to upgrade to 8.3 yesterday but failed miserably. Something
about not being able to schedule installation of app pools...sigh...its
only a 3 week wait for support...

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg.com/ <http://www.dsmfg.com/> >

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com> ] On
Behalf
Of Charlie Wilson
Sent: Thursday, April 02, 2009 1:29 PM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] SC Choice Configuration

Getting to version 8.3 makes this amazingly easy, I would look into
upgrading!

~Charlie

_____

From: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> ] On
Behalf Of
Rob Bucek
Sent: Tuesday, March 31, 2009 2:28 PM
To: vantage@yahoogroups.com <mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] SC Choice Configuration

Yeah, I wasn't really suggesting that might necessarily work for you, as
it was somewhat of a lame workaround in the first place!

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg <http://www.dsmfg.com/ <http://www.dsmfg.com/> <
http://www.dsmfg.com/ <http://www.dsmfg.com/> > >
com/>

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
Of Charlie Wilson
Sent: Tuesday, March 31, 2009 1:25 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: RE: [Vantage] SC Choice Configuration

I thought about doing that too but it doesn't really work in this case
because I could have records like this:

OpSeq OpDtlSeq

10 10

20 10

20 20

And if set the xpaths in this order:

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprDtlSeq = 20

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprSeq = 10

They would both come up true because there is a record that satisfies
each
statement when in fact I really only want it to come up true if their
was a
record where opseq = 10 and opdtlseq = 20

~Charlie

_____

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com> ] On
Behalf Of
Rob Bucek
Sent: Tuesday, March 31, 2009 2:11 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] SC Choice Configuration

Id be interested in that one as well. In the past to get around that I
put two choice elements in a row to check multiple conditions. It would
be nice to be able to do it in one.

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg <http://www.dsmfg <http://www.dsmfg.com/
<http://www.dsmfg.com/>
<http://www.dsmfg.com/ <http://www.dsmfg.com/> > > com/
<http://www.dsmfg <http://www.dsmfg.com/ <http://www.dsmfg.com/> <
http://www.dsmfg.com/ <http://www.dsmfg.com/> > >
com/> >
com/>

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
Of Charlie Wilson
Sent: Tuesday, March 31, 2009 12:58 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: [Vantage] SC Choice Configuration

I need to configure a choice in service connect to check two fields to
see
if there are two specific values is this the correct way to set the
xpath
expression?

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprDtlSeq = 20 and OprSeq = 10]

Cuz it doesn't seem to be working

I'm working on changing Resources on part methods.

I need Flow to update the resource 20 on operation 10 only if it exsist.
But
methods could have multiple operations.

Any help would be greatly appreciated.

~Charlie

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups.yahoo.com/group/vantage/files/.
<http://groups.yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups.yahoo.com/group/vantage/messages
<http://groups.yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups.yahoo.com/group/vantage/linksYahoo
<http://groups.yahoo.com/group/vantage/linksYahoo> ! Groups Links





[Non-text portions of this message have been removed]
17
How can I set this up to check each opdtl and adjust the ones that apply?



Sub workflow???



~Charlie

_____

From: vantage@yahoogroups.com [mailto:vantage@yahoogroups.com] On Behalf Of
Rob Bucek
Sent: Thursday, April 02, 2009 3:58 PM
To: vantage@yahoogroups.com
Subject: RE: [Vantage] SC Choice Configuration



I may have inadvertently corrupted the IIS configuration while I was
messing around trying to set up a web service to launch ssis
packages.... Fortunately SC is on a stand alone server so I can restore
to a state before I messed with it. My hunches are that permissions are
messed up somehow.

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg. <http://www.dsmfg.com/> com/>

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
Of Brian W. Spolarich
Sent: Thursday, April 02, 2009 2:36 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: RE: [Vantage] SC Choice Configuration

I would export/backup my config, uninstall 8.2, install 8.3, and be
done. It wasn't a big deal when I did it.

--
Brian W. Spolarich ~ Manager, Information Services ~ Advanced Photonix /
Picometrix
bspolarich@advanced <mailto:bspolarich%40advancedphotonix.com> photonix.com
<mailto:bspolarich%40advancedphotonix.com> ~ 734-864-5618 ~
www.advancedphotonix.com

-----Original Message-----
From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com> ] On
Behalf Of Rob Bucek
Sent: Thursday, April 02, 2009 3:05 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] SC Choice Configuration

I tried to upgrade to 8.3 yesterday but failed miserably. Something
about not being able to schedule installation of app pools...sigh...its
only a 3 week wait for support...

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg. <http://www.dsmfg.com/> com/ <http://www.dsmfg.
<http://www.dsmfg.com/> com/> >

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com> ] On
Behalf
Of Charlie Wilson
Sent: Thursday, April 02, 2009 1:29 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] SC Choice Configuration

Getting to version 8.3 makes this amazingly easy, I would look into
upgrading!

~Charlie

_____

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com> ] On
Behalf Of
Rob Bucek
Sent: Tuesday, March 31, 2009 2:28 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] SC Choice Configuration

Yeah, I wasn't really suggesting that might necessarily work for you, as
it was somewhat of a lame workaround in the first place!

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg. <http://www.dsmfg. <http://www.dsmfg.com/> com/
<http://www.dsmfg. <http://www.dsmfg.com/> com/> <
http://www.dsmfg. <http://www.dsmfg.com/> com/ <http://www.dsmfg.
<http://www.dsmfg.com/> com/> > >
com/>

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
Of Charlie Wilson
Sent: Tuesday, March 31, 2009 1:25 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: RE: [Vantage] SC Choice Configuration

I thought about doing that too but it doesn't really work in this case
because I could have records like this:

OpSeq OpDtlSeq

10 10

20 10

20 20

And if set the xpaths in this order:

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprDtlSeq = 20

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprSeq = 10

They would both come up true because there is a record that satisfies
each
statement when in fact I really only want it to come up true if their
was a
record where opseq = 10 and opdtlseq = 20

~Charlie

_____

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com> ] On
Behalf Of
Rob Bucek
Sent: Tuesday, March 31, 2009 2:11 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
<mailto:vantage%40yahoogroups.com>
Subject: RE: [Vantage] SC Choice Configuration

Id be interested in that one as well. In the past to get around that I
put two choice elements in a row to check multiple conditions. It would
be nice to be able to do it in one.

Rob Bucek

Manufacturing Engineer

PH: 715-284-5376 ext 311

FAX: 715-284-4084

<http://www.dsmfg. <http://www.dsmfg. <http://www.dsmfg.
<http://www.dsmfg.com/> com/
<http://www.dsmfg. <http://www.dsmfg.com/> com/>
<http://www.dsmfg. <http://www.dsmfg.com/> com/ <http://www.dsmfg.
<http://www.dsmfg.com/> com/> > > com/
<http://www.dsmfg. <http://www.dsmfg. <http://www.dsmfg.com/> com/
<http://www.dsmfg. <http://www.dsmfg.com/> com/> <
http://www.dsmfg. <http://www.dsmfg.com/> com/ <http://www.dsmfg.
<http://www.dsmfg.com/> com/> > >
com/> >
com/>

(Click the logo to view our site)

________________________________

From: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
[mailto:vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com] On
Behalf
Of Charlie Wilson
Sent: Tuesday, March 31, 2009 12:58 PM
To: vantage@yahoogroups <mailto:vantage%40yahoogroups.com> .com
Subject: [Vantage] SC Choice Configuration

I need to configure a choice in service connect to check two fields to
see
if there are two specific values is this the correct way to set the
xpath
expression?

/msg:msg/msg:req/msg:dta/dta:GetDatasetForTreeResponse[dta:result/EngWor
kBen
chDataSet/ECOOpDtl/OprDtlSeq = 20 and OprSeq = 10]

Cuz it doesn't seem to be working

I'm working on changing Resources on part methods.

I need Flow to update the resource 20 on operation 10 only if it exsist.
But
methods could have multiple operations.

Any help would be greatly appreciated.

~Charlie

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

------------------------------------

Useful links for the Yahoo!Groups Vantage Board are: ( Note: You must
have already linked your email address to a yahoo id to enable access. )
(1) To access the Files Section of our Yahoo!Group for Report Builder
and Crystal Reports and other 'goodies', please goto:
http://groups. <http://groups.yahoo.com/group/vantage/files/>
yahoo.com/group/vantage/files/.
<http://groups. <http://groups.yahoo.com/group/vantage/files/>
yahoo.com/group/vantage/files/>
(2) To search through old msg's goto:
http://groups. <http://groups.yahoo.com/group/vantage/messages>
yahoo.com/group/vantage/messages
<http://groups. <http://groups.yahoo.com/group/vantage/messages>
yahoo.com/group/vantage/messages>
(3) To view links to Vendors that provide Vantage services goto:
http://groups. <http://groups.yahoo.com/group/vantage/linksYahoo>
yahoo.com/group/vantage/linksYahoo
<http://groups. <http://groups.yahoo.com/group/vantage/linksYahoo>
yahoo.com/group/vantage/linksYahoo> ! Groups Links

[Non-text portions of this message have been removed]





[Non-text portions of this message have been removed]